Development of a Magnetic Nanoparticles-Based Screen-Printed Electrodes (MNPs-SPEs) Biosensor for the Quantification of Ochratoxin A in Cereal and Feed Samples

Latest strategies for rapid and point of care detection of mycotoxins in food: A review

Mycotoxins contaminated in agricultural products are often highly carcinogenic and genotoxic to humans. With the streamlining of the food industry chain and the improvement of food safety requirements, the traditional laboratory testing mode is constantly challenged due to the expensive equipment, complex operation steps, and lag in testing results. Therefore, rapid detection methods are urgently needed in the food safety system. This review focuses on the latest strategies that can achieve rapid and on-site testing, with particular attention to the nanomaterials integrated biosensors. To provide researchers with the latest trends and inspiration in the field of rapid detection, we summarize several strategies suitable for point of care testing (POCT) of mycotoxins, including enzyme-linked immunoassay (ELISA), lateral flow assay (LFA), fluorescence, electrochemistry, and colorimetry assay. POCT-based strategies are all developing towards intelligence and portability, especially when combined with smartphones, making it easier to read signals for intuitive access and analysis of test data. Detection performance of the devices has also improved considerably with the integration of biosensors and nanomaterials.

Functional Micro-/Nanostructures in Agrofood Science: Precise Inspection, Hazard Elimination, and Potential Health Risks

Nanotechnology, biotechniques, and chemical engineering have arisen as new trends with significant impacts on agrofood science development. Advanced analytical techniques with high sensitivity, specificity, and automation based on micro-/nanomaterials for food hazard elimination have become leading research hotspots in agrofood science. Research progress in micro-/nanomaterials has provided a solid theoretical basis and technical support to solve problems in the industry. However, the rapid development of micro-/nanostructures has also raised concerns regarding potential risks to human health. This review presents the latest advances in the precise inspection and elimination of food hazards from micro-/nanomaterials and discusses the potential threats to human health posed by nanomaterials. The theoretical reference was provided for the application trend of micro-/nanomaterials in the field of agrofood science in the future.

A review on recent advances in the applications of composite Fe3O4 magnetic nanoparticles in the food industry

Fe3O4 magnetic nanoparticles (MNPs) have attracted tremendous attention due to their superparamagnetic properties, large specific surface area, high biocompatibility, non-toxicity, large-scale production, and recyclability. More importantly, numerous hydroxyl groups (-OH) on the surface of Fe3O4 MNPs can provide coupling sites for various modifiers, forming versatile nanocomposites for applications in the energy, biomedicine, and environmental fields. With the development of science and technology, the potential of nanotechnology in the food industry has also gradually become prominent. However, the application of composite Fe3O4 MNPs in the food industry has not been systematically summarized. Herein, this article reviews composite Fe3O4 MNPs, including their properties, modifications, and physical functions, as well as their applications in the entire food industry from production to processing, storage, and detection. This review lays a solid foundation for promoting food innovation and improving food quality and safety.

Broad-Spectrum Theranostics and Biomedical Application of Functionalized Nanomaterials

Nanotechnology is an important branch of science in therapies known as “nanomedicine” and is the junction of various fields such as material science, chemistry, biology, physics, and optics. Nanomaterials are in the range between 1 and 100 nm in size and provide a large surface area to volume ratio; thus, they can be used for various diseases, including cardiovascular diseases, cancer, bacterial infections, and diabetes. Nanoparticles play a crucial role in therapy as they can enhance the accumulation and release of pharmacological agents, improve targeted delivery and ultimately decrease the intensity of drug side effects. In this review, we discussthe types of nanomaterials that have various biomedical applications. Biomolecules that are often conjugated with nanoparticles are proteins, peptides, DNA, and lipids, which can enhance biocompatibility, stability, and solubility. In this review, we focus on bioconjugation and nanoparticles and also discuss different types of nanoparticles including micelles, liposomes, carbon nanotubes, nanospheres, dendrimers, quantum dots, and metallic nanoparticles and their crucial role in various diseases and clinical applications. Additionally, we review the use of nanomaterials for bio-imaging, drug delivery, biosensing tissue engineering, medical devices, and immunoassays. Understandingthe characteristics and properties of nanoparticles and their interactions with the biological system can help us to develop novel strategies for the treatment, prevention, and diagnosis of many diseases including cancer, pulmonary diseases, etc. In this present review, the importance of various kinds of nanoparticles and their biomedical applications are discussed in much detail.

Nanomaterial-based aptamer biosensors for ochratoxin A detection: a review

Ochratoxin A (OTA) is a widely distributed mycotoxin that often contaminates food, grains and animal feed. It poses a serious threat to human health because of its high toxicity and persistence. Therefore, the development of an inexpensive, highly sensitive, accurate and rapid method for OTA detection is imperative. In recent years, various nanomaterials used in the establishment of aptasensors have attracted great attention due to their large surface-to-volume ratio, good stability and facile preparation. This review summarizes the development of nanomaterial-based aptasensors for OTA determination and sample treatment over the past 5 years. The nanomaterials used in OTA aptasensors include metal, carbon, luminescent, magnetic and other nanomaterials. Finally, the limitations and future challenges in the development of nanomaterial-based OTA aptasensors are reviewed and discussed.

Electrochemical quantification of biomarker myeloperoxidase

Point of care testing (PoCT) devices permit precise and rapid detection of disease-related biomarkers contributing to an early disease diagnosis and administration of an appropriate treatment. The enzyme myeloperoxidase (MPO) is a relevant biomarker for infection and inflammation events assessment; however its direct electrochemical quantification is hindered by the limited accessibility to the iron atom in its active center. Herein, such hindrance of the MPO biomolecule is overcome using the redox mediator 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS). The charge involved in the electrochemical reduction of the MPO-oxidized ABTS is correlated with the concentration of MPO. The use of ABTS allowed for the electrochemical assessment of a wide range of MPO concentrations (10-1000 nM) including those reported for wound infections, chronic obstructive pulmonary disease and early adverse cardiac events. The developed electroanalytical approach is rapid and inexpensive, and thus suitable for implementation in PoCT devices.

Antibody conjugated magnetic nanoparticle based colorimetric assay for the detection and quantification of aflatoxin B1 in wheat grains

Aflatoxin B1 (AFB1) is a most potent carcinogenic secondary metabolite produced by Aspergillus flavus. As a food safety concern, development of a rapid, cost effective, sensitive and easy to use method for the detection of aflatoxin is of prime requirement. In this study, AFB1 was conjugated with bovine serum albumin (BSA), and AFB1-BSA conjugate was purified by HPLC. Purification was confirmed by UV-Vis spectroscopy, FTIR and MALDI-TOF mass spectrometry. The polyclonal antibody was raised against AFB1-BSA conjugate in rabbit and purified by protein A sepharose and BSA sepharose affinity columns. Iron oxide nanoparticles (MNPs) were synthesised by co-precipitation method and their surface was functionalised with (3-aminopropyl) triethoxysilane (APTES). Size of APTES conjugated MNPs was determined by electron microscopy, and characterised by several biophysical techniques. The purified anti-AFB1 antibody was conjugated with surface functionalised MNPs and the conjugation was confirmed by determining the sizes of free and antibody conjugated MNPs by field emission scanning electron microscope where increase of particle sizes from 10-20 to 40-50 nm was observed due to antibody conjugation. Anti-AFB1 antibody conjugated MNPs were used for capturing AFB1 from the aflatoxin spiked wheat grains with a recovery percentage of more than 80% and used effectively five times. The captured AFB1 was then quantified by a sensitive colorimetric assay where colourless AFB1 was first converted into coumaric acid by NaOH. Subsequently, coumaric acid reacted with 2,6-dibromoquinone-4-chloroimide (DBQC) to a green-coloured indophenol product which was quantified spectrophotometrically. AFB1 contamination as low as 2 μg/kg in wheat grains was detected by the developed technique suggesting its potential application for both qualitative and quantitative analysis of aflatoxins present in feed and food materials.

Biosensors for Deoxynivalenol and Zearalenone Determination in Feed Quality Control

Mycotoxin contamination of cereals used for feed can cause intoxication, especially in farm animals; therefore, efficient analytical tools for the qualitative and quantitative analysis of toxic fungal metabolites in feed are required. Current trends in food/feed analysis are focusing on the application of biosensor technologies that offer fast and highly selective and sensitive detection with minimal sample treatment and reagents required. The article presents an overview of the recent progress of the development of biosensors for deoxynivalenol and zearalenone determination in cereals and feed. Novel biosensitive materials and highly sensitive detection methods applied for the sensors and the application of these sensors to food/feed products, the limit, and the time of detection are discussed.

Simultaneous determination of ochratoxin A and enterotoxin A in milk by magnetic nanoparticles based fluorescent immunoassay

Ochratoxin A (OTA) and staphylococcus enterotoxin A (SEA) are highly toxic contaminants and have induced human health problems. They commonly occur in milk and milk products. A competitive fluorescent immunoassay was developed for rapid and simultaneous determination of these toxins in milk samples. The procedure was based on the competitive immunoreactions between antigens in sample and antigen-fluorescent dye conjugates with immobilised antibodies on magnetic nanoparticles (MNPs). Each monoclonal antibody specifically recognises its corresponding toxin (antigen), and there is no cross-reactivity in the assay. First, monoclonal antibodies against OTA and SEA were produced. The activity of the obtained antibodies was determined by fluorescent-linked immunosorbent assay. Then, the monoclonal antibodies were immobilised on MNPs. The amounts of immobilised anti-OTA antibody and anti-SEA antibody were determined to be 20 and 22 μg mL^-1, respectively. The antigen-fluorescent dye conjugates OTA-OVA-ATTO620 and SEA-FITC were prepared. The optimal amount of immobilised antibodies for competitive immunoassay was determined. It was found that the linear range of OTA in buffer was larger (0.001-100 ng mL^-1) than the linear range of SEA (0.001-20 ng mL^-1). The results for simultaneous determination of OTA and SEA in sixfold diluted milk were almost the same in buffer; the linear range for OTA was from 0.005  to 100 ng mL^-1 and for SEA from 0.005  to 20 ng mL^-1. The detection limit for both OTA and SEA in milk was 0.004 ng mL^-1. The developed method took half the time of the individual assays (20 min). The assay was evaluated using spiked milk samples. The influences of somatic cell count, fat, pH and protein concentration in milk on immunoassay were studied. In summary, this developed immunoassay could provide an effective and rapid approach for detecting multi-toxins in milk samples.

Recent Applications of Magnetic Nanoparticles in Food Analysis

Nanotechnology has become a topic of interest due to the outstanding advantages that the use of nanomaterials offers in many fields. Among them, magnetic nanoparticles (m-NPs) have been one of the most widely applied in recent years. In addition to the unique features of nanomaterials in general, which exclusively appear at nanoscale, these present magnetic or paramagnetic properties that result of great interest in many applications. In particular, in the area of food analysis, the use of these nanomaterials has undergone a considerable increase since they can be easily separated from the matrix in sorbent-based extractions, providing a considerable simplification of the procedures. This allows reducing cost and giving fast responses, which is essential in the food trade to guarantee consumer safety. These materials can also be easily tunable, providing higher selectivity. Moreover, their particular electrical, thermal and optical characteristics allow enhancing sensor signals, increasing the sensitivity of the approaches based on this type of device. The aim of this review article is to summarise the most remarkable applications of m-NPs in food analysis in the last five years (2016–2020) showing a general view of the use of such materials in the field.

Recent Advances in Ochratoxin A Electrochemical Biosensors: Recognition Elements, Sensitization Technologies, and Their Applications

Ochratoxin A (OTA) is a class of mycotoxin that are mainly produced by Aspergillus and Penicillium and widely found in plant origin food. OTA-contaminated foods can cause serious harm to animals and humans, while high stability of OTA makes it difficult to remove in conventional food processing. Thus, sensitive and rapid detection of OTA undoubtedly plays an important role in OTA prevention and control. In this paper, the conventional and novel methods of OTA at home and abroad are summarized and compared. The latest research progress and related applications of novel OTA electrochemical biosensors are mainly described with a new perspective. We innovatively divided the recognition element into single and combined recognition elements. Specifically, signal amplification technologies applied to the OTA electrochemical aptasensor are proposed. Furthermore, summary of the current limitations and future challenges in OTA analysis is included, which provide reference for the further research and applications.

Immunofluorescence Assay Using Monoclonal and Polyclonal Antibodies for Detection of Staphylococcal Enterotoxins A in Milk

Objectives:

Staphylococcus aureus is a Gram-positive microorganism. S. aureus can grow in various foods and cause food poisoning by secreting enterotoxins. The most common enterotoxins involved in food poisoning are staphylococcal enterotoxin A and staphylococcal enterotoxin B, but Staphylococcal Enterotoxin A (SEA) is predominant. The main types of food contaminated with SEs are meat and meat products, poultry and eggs, milk and dairy products. The aim of this study was to develop a rapid and sensitive fluorescence immunoassay for detection of staphylococcal enterotoxin A in milk.

Methods:

Monoclonal and polyclonal antibodies for SEA were produced and characterized. Competitive fluorescence immunoassay based on Magnetic Nanoparticles (MNPs) was performed and optimized. MNPs were used as a solid carrier of the antibodies. The first step of the assay was immunoreaction between the immobilized antibody onto MNPs and SEA in milk sample. Then the fluorescein-SEA conjugate was added to the sample. Thus, competitive immunoreaction between MNP-mAb/MNP-pAb with SEA and SEA-FITC was performed. These immuno-complexes were separated by a magnetic separator and the obtained supernatants were analyzed. The fluorescent signal from the excess of conjugated SEA was proportional to the SEA contained in the milk. The assay duration was only 30 min.

Results:

The fluorescence immunoassays performed with polyclonal antibody had linear ranges from 5 pg/mL to 100 ng/mL SEA in a buffer, and from 50 pg/mL to 50 ng/mL SEA in spiked milk samples. While the same assays performed with monoclonal antibody had linear ranges from 1 pg/mL to 20 ng/mL SEA in buffer, and from 10 pg/mL to 10 ng/mL SEA in spiked milk samples. The detection limits of the developed immunoassays performed in milk were: 48 pg/mL with polyclonal antibody and 9 pg/mL with monoclonal antibody.

Conclusion:

A rapid and sensitive fluorescence immunoassay based on magnetic nanoparticles with a polyclonal and monoclonal antibody for determination of staphylococcal enterotoxin A in milk was developed.

Graphene-Based Sensing Platform for On-Chip Ochratoxin A Detection

In this work, we report an on-chip aptasensor for ochratoxin A (OTA) toxin detection that is based on a graphene field-effect transistor (GFET). Graphene-based devices are fabricated via large-scale technology, allowing for upscaling the sensor fabrication and lowering the device cost. The sensor assembly was performed through covalent bonding of graphene's surface with an aptamer specifically sensitive towards OTA. The results demonstrate fast (within 5 min) response to OTA exposure with a linear range of detection between 4 ng/mL and 10 pg/mL, with a detection limit of 4 pg/mL. The regeneration time constant of the sensor was found to be rather small, only 5.6 s, meaning fast sensor regeneration for multiple usages. The high reproducibility of the sensing response was demonstrated via using several recycling procedures as well as various GFETs. The applicability of the aptasensor to real samples was demonstrated for spiked red wine samples with recovery of about 105% for a 100 pM OTA concentration; the selectivity of the sensor was also confirmed via addition of another toxin, zearalenone. The developed platform opens the way for multiplex sensing of different toxins using an on-chip array of graphene sensors.

Antibody Microarray Immunoassay for Simultaneous Quantification of Multiple Mycotoxins in Corn Samples

We developed and tested a prototype of an antibody microarray immunoassay for simultaneous quantitative detection of four typical mycotoxins (aflatoxin B₁, ochratoxin A, zearalenone, and fumonisin B₁) in corn samples. The test kit consisted of a nitrocellulose membrane layered with immobilized monoclonal antibodies against mycotoxins. During the assay, the mycotoxin-protein conjugates were biotinylated. The signal detection was enhanced by a combination of the biotin-streptavidin system and enhanced chemiluminescence (ECL). This improved the sensitivity of the assay. Under the optimized conditions, four calibration curves with goodness of fit (R² > 0.98) were plotted. The results showed that the detection limits for aflatoxin B₁, ochratoxin A, zearalenone, and fumonisin B₁ were 0.21, 0.19, 0.09, and 0.24 ng/mL, with detection ranges of 0.47⁻55.69, 0.48⁻127.11, 0.22⁻31.36, and 0.56⁻92.57 ng/mL, respectively. The limit of detection (LOD) of this antibody microarray for aflatoxin B₁, ochratoxin A, zearalenone, and fumonisin B₁ in corn was 5.25, 4.75, 2.25, and 6 μg/kg, respectively. The recovery rates from the spiked samples were between 79.2% and 113.4%, with coefficient of variation <10%. The results of the analysis of commercial samples for mycotoxins using this new assay and the liquid chromatography-tandem mass spectrometry (LC-MS/MS) were comparable and in good agreement. This assay could also be modified for the simultaneous detection of other multiple mycotoxins, as well as low-weight analytes, hazardous to human health.