Olive Mill Wastewater: From a Pollutant to Green Fuels, Agricultural Water Source, and Bio-Fertilizer. Part 2: Water Recovery

Olive mill wastes: from wastes to resources

Olive oil extraction has recently experienced a continuous increase due to its related beneficial properties. Consequently, large amounts of olive mill wastes (OMWs) derived from the trituration process are annually produced, causing serious environmental problems. The limited financial capabilities of olive mills make them usually unable to bear the high costs required for the disposal of their wastes. Alternatively, the valorization of OMWs within the framework of the so-called waste-to-resource concept and their recycling can represent a successful strategy for the implementation of circular economy model in the olive industry, which could have significant socioeconomic impacts on low-income Mediterranean countries. There is, however, no unique solution for OMWs valorization, due to the wide variety of the wastes' composition and their seasonal production. In this review, the potential of OMWs for being reused and the recent technological advances in the field of OMWs valorization are assessed. Special focus is given to the analysis of the advantages and limitations of each technology and to reporting the most significant issues that still limiting its industrial scale-up. The information collected in this review shows that OMW could be effectively exploited in several sectors, including energy production and agriculture. OMWs potential seems, however, undervalued, and the implementation of sustainable valorization strategies in large-scale remains challenging. More efforts and policy actions, through collective actions, encouraging subsidies, and establishing public-private collaborations, are still needed to reconcile research progress with industrial practices and encourage the large-scale implementation of the waste-to-resource concept in the olive sector.

Olive industry liquid waste from trash to metal adsorbent for wastewater purification

The development of biobased polymeric materials for wastewater purification has become a demand due to the growing need for water free of hazardous metal ions for safe purposes. The organic components of the OLLW including carbohydrates, phenolics, aromatic acids and others are cost-effective and sustainable choices for this application. This work focuses on a method for turning the organic components of liquid waste from the olive industry (OILW) into a foam-based value-added polymer that has several metal ion binding sites. The process of making the target polymers involved reacting the components of the OILW with hexamethylene diisocyante and 1,4-phnyelene diisocynate to create the polymeric materials LHMIDIC and LPDIC that are in foam forms with urethane linkages, respectively. The adsorption competence of the polymeric foams toward Pb(II) was evaluated as a function of various parameters including adsorbent dose, pH, temperature, initial ion concentration and time. The optimum parameters values that led to a quantitative removal of Pb(II) were identified. The obtained thermodynamic parameters showed that the adsorption by the two foams was spontaneous at room temperature. The isothermal and kinetic values showed that the adsorption by synthesized foams follows a second order kinetic and obeys the Langmuir isothermal model. The foams showed a high tendency for removing multi metal ions present in a real sample of wastewater. The original nature of the starting material used in making the foam, cost and the obtained results showed the potential of using the foam in a large-scale plants of wastewater purification.

Optimization of olive oil extraction wastes co composting procedure based on bioprocessing parameters

Organic waste generation has increased massively around the world during the last decades, especially the waste produced by the olive-growing industry. In order to manage the waste accumulation, composting process is an appropriate biotechnological solution which allows the waste organic matter biotransformation into a useful product the "compost", used as an amendment for agricultural soils. The classical composting process presents several disadvantages; the major difficulty is to find the best feedstocks proportion to be used, leading to a final C/N ratio ranged between 12 and 15, a neutral pH, a humidity between 40% and 60% and organic matter (OM) content of 20-60%, at ambient temperature. Consequently, an accurate optimization of the composting process is needed for predicting the process parameters progress. To optimize these parameters and the waste rates initially mixed, the multiple regression method was used to determine the compost final parameters values, referring to the initial mixture of the different waste types. The best model filling the required standardized values included 49% of olive mill wastewater, 19.5% of exhausted olive mill cake, 15.5% of poultry manure, and 16% of green waste. This combination provides a pH of 7.5, a C/N ratio of 12.5 and an OM content of 44%. Such modelization would enshorten the composting required time.

Effect of olive-processing technology on the utilization of olive mill pomace as a soil amendment

In the Mediterranean basin, the treatment and disposal of olive mill pomace (OMP) remain a salient environmental issue for the olive oil-producing industry. This study assesses the effects of olive-processing technology (three-phase and two-phase systems) on the potential use of OMP as a soil amendment. Samples from 12 Croatian olive mills were analyzed for their total phenolic content (TPC), residual oil fraction, and elemental concentration. The samples were profiled using Fourier transform infrared spectroscopy (FT-IR) and structurally characterized using scanning electron microscopy-energy-dispersive X-ray spectroscopy (EDS). Compared to three-phase samples, two-phase OMP was more acidic (pH 4.5 vs. 5.0), with a higher TPC (3835 vs. 1576 mg/kg fresh weight), oil content (11.7% vs. 7.5% d.w., where d.w. is dry weight), electrical conductivity (EC, 5.1 vs. 3.0 mS/cm), and levels of calcium (Ca, 1.34 vs. 1.20 g/kg d.w.) and copper (Cu, 10.4 vs. 7.0 mg/kg d.w.). Similar values of carbon/nitrogen (C/N; 61 vs. 72), N (10 vs. 8.1 g/kg d.w.), phosphorus (1040 vs. 691 mg/kg d.w.), and potassium (K, 13.7 vs. 8.1 g/kg d.w.) were observed. The amounts of chromium, copper, nickel, and zinc were below EC limits in both cases. The EDS mapping revealed that Ca was concentrated at sharp-edged OMP particles while K was evenly distributed, suggesting that pelletized OMP compost is preferable for amending soil to obtain a homogeneous distribution of nutrients. It was also possible to distinguish between OMPs based on oil and lignin absorption bands in their FT-IR spectra. According to the obtained results, composting is recommended for both types of OMP to produce a safe product for amendment purposes.

Treatment technologies for olive mill wastewater with impacts on plants

Olive mill wastewater (OMW), produced during olive oil production, contains high levels of salt contents, organic matter, suspended particles, and toxic chemicals (particularly phenols), which all result in increased biological and chemical oxygen demand. Olive Oil Mills' Wastes (OMW), which have dark brown color with unpleasant smell, consist mainly of water, high organic (mainly phenols and polyphenols) and low inorganic compounds (e.g. potassium and phosphorus), as well as grease. OMW components can negatively affect soil's physical, chemical, and biological properties, rendering it phytotoxic. However, OMW can positively affect plants' development when it's applied to the soil after pretreatment and treatment processes due to its high mineral contents and organic matter. There are various approaches for removing impurities and the treatment of OMW including chemical, biological, thermal, physiochemical, and biophysical processes. Physical techniques involve filtration, dilution, and centrifugation. Thermal methods include combustion and pyrolysis; biological techniques use anaerobic and aerobic techniques, whereas adsorption and electrocoagulation act as physiochemical methods, and coagulation and flocculation as biophysical methods. In contrast, combined biological treatment methods use co-digestion and composting. A comparison of the effects of both treated and untreated OMW samples on plant development and soil parameters can help us to understand the potential role of OMW in increasing soil fertility. This review discusses the impacts of untreated OMW and treated OMW in terms of soil characteristics, seed germination, and plant growth. This review summarizes all alternative approaches and technologies for pretreatment, treatment, and recovery of valuable byproducts and reuse of OMW across the world.

A comprehensive review on comparison among effluent treatment methods and modern methods of treatment of industrial wastewater effluent from different sources

In recent years, rapid development in the industrial sector has offered console to the people but at the same time, generates numerous amounts of effluent composed of toxic elements like nitrogen, phosphorus, hydrocarbons, and heavy metals that influences the environment and mankind hazardously. While the technological advancements are made in industrial effluent treatment, there arising stretch in the techniques directing on hybrid system that are effective in resource recovery from effluent in an economical, less time consuming and viable manner. The key objective of this article is to study, propose and deliberate the process and products obtained from different industries and the quantity of effluents produced, and the most advanced and ultra-modern theoretical and scientific improvements in treatment methods to remove those dissolved matter and toxic substances and also the challenges and perspectives in these developments. The findings of this review appraise new eco-friendly technologies, provide intuition into the efficiency in contaminants removal and aids in interpreting degradation mechanism of toxic elements by various treatment assemblages.

Agri-Food Industry Waste as Resource of Chemicals: The Role of Membrane Technology in Their Sustainable Recycling

The agri-food sector generates substantial quantities of waste material on farm and during the processing of these commodities, creating serious social and environmental problems. However, these wastes can be resources of raw material for the production of valuable chemicals with applications in various industrial sectors (e.g., food ingredients, nutraceuticals, bioderived fine chemicals, biofuels etc.). The recovery, purification and biotransformation of agri-food waste phytochemicals from this microbial spoilage-prone, complex agri-food waste material, requires appropriate fast pre-treatment and integration of various processes. This review provides a brief summary and discussion of the unique advantages and the importance of membrane technology in sustainable recycling of phytochemicals from some of the main agri-food sectors. Membrane-based pressure -driven processes present several advantages for the recovery of labile compounds from dilute streams. For example, they are clean technologies that can operate at low temperature (20–60 °C), have low energy requirements, there is no need for additional chemicals, can be quite automated and electrifiable, and have low space requirements. Based on their permselective properties based on size-, shape-, and charge-exclusion mechanisms, membrane-based separation processes have unpaired efficiency in fractionating biological components while presenting their properties. Pressure-driven membrane processes, such as microfiltration (MF), ultrafiltration (UF) and nanofiltration (NF), as well as other advanced membrane-based processes such as membrane bioreactors (MBR), membrane emulsification (ME) and membrane distillation (MD), are presented. The integration of various membrane technologies from the initial recovery of these phytochemicals (MF, UF, NF) to the final formulation (by ME) of commercial products is described. A good example of an extensively studied agri-food stream is the olive processing industry, where many different alternatives have been suggested for the recovery of biophenols and final product fabrication. Membrane process integration will deliver in the near future mature technologies for the efficient treatment of these streams in larger scales, with direct impact on the environmental protection and society (production of compounds with positive health effects, new job creation, etc.). It is expected that integration of these technologies will have substantial impact on future bio-based societies over forthcoming decades and change the way that these chemicals are currently produced, moving from petrochemical-based linear product fabrication to a sustainable circular product design based in agri-food waste biomass.

Olive Mill by-Products Thermochemical Conversion via Hydrothermal Carbonization and Slow Pyrolysis: Detailed Comparison between the Generated Hydrochars and Biochars Characteristics

In this research work, an ecofriendly approach was adopted for the treatment of two abundant liquid and solid agricultural wastes generated by olive mill industry: olive mill wastewater (OMWW) and raw olive pomace (ROP). It consists, firstly of the impregnation of ROP by OMWW and the conversion of the resulting impregnated sample (IROP) into hydrochars and biochars through hydrothermal carbonization (HTC) and slow pyrolysis methods, respectively. The impact of the treatment temperature on the physico-chemical properties of the derived chars was assessed by various analytical techniques. The hydrochars production yields were found to be higher than the biochars ones and associated to the lower temperature used. However, the generated biochars possess higher carbon percentage and lower volatile matter contents. In addition, the increase of the hydrothermal and pyrolysis carbonization temperatures shows an increase of macro-elements contents and a significant decrease of the O/C ratios which led to an enhancement of the high heating value for both hydrochars and biochars. The FTIR and Boehm titration analysis highlighted a significant alteration of the biochars surface chemistry compared to hydrochars evidenced by the lower amount of functional groups. The collected data emphasize on the efficient potential application of hydrochars and biochars for agricultural and environmental applications, respectively. Furthermore, it was noted that both chars have high energetic potentials and could be used for co-firing with coal in industrial boilers.

Olive mill wastewater phytoremediation employing economically important woody plants

In this study two plant species, Punica granatum L. and Myrtus communis L., have been tested as candidates for phytoremediation of olive mill wastewater (OMW) through recirculation in soil pilot units, according to the proposed patented technology by Santori and Cicalini [EP1216963 A. 26 Jun 2002]. Wastewater was treated in batches of low to high organics strength (COD: 2 700-45 700 mg/L) during summer months of two consecutive years. Dynamics of the most important wastewater parameters were investigated, and corresponding removal rates were estimated. During treatment of low organic load OMW, average removal rate of organics, phenolics, total nitrogen and total phosphorus were 0.68 g-COD/kg-soil d, 0.073 g-TPh/kg-soil d, 0.033 g-TN/kg-soil d and 0.0074 g-TP/kg-soil d respectively and plants proved to be tolerant to the OMW. During treatment of high organic load OMW removal rates were roughly 10-fold higher although phytotoxic symptoms were observed. Plants were found to contribute greatly to the OMW treatment process since organics removal rates in pilot units were found to be at least 10-fold higher than in wastewater treatment in non-vegetated soil. Plant species with high added value products such as pomegranate and myrtle trees were used in this study, improving the circular economy potential of the aforementioned technology. Moreover, its efficiency has been demonstrated by quantification of the overall removal rates of key constituents as well as the contribution of the plants in the OMW treatment.

Removal of Phenols in Table Olive Processing Wastewater by Using a Mixed Inoculum of Candida boidinii and Bacillus pumilus: Effects of Inoculation Dynamics, Temperature, pH, and Effluent Age on the Abatement Efficiency

The main goal of this paper was to assess the ability of a combination of Candida boidinii and Bacillus pumilus to remove phenol in table olive processing water, as a function of some variables, like temperature, pH, a dilution of waste and the order of inoculation of the two microorganisms. At this purpose C. boidinii and B. pumilus were sequentially inoculated in two types of table olive processing water (fresh wastewater, FTOPW and wastewater stored for 3 months-aged wastewater, ATOPW). pH (6 and 9), temperature (10 and 35 °C) and dilution ratio (0, 1:1) were combined through a 2k fractional design. Data were modeled using two different approaches: Multifactorial Analysis of Variance (MANOVA) and multiple regression. A higher removal yield was achieved by inoculating B. pumilus prior to the yeast (192 vs. 127 mg/L); moreover, an increased efficiency was gained at 35 °C (mean removal of 200 mg/L). The use of two statistic approach suggested a different weight of variables; temperature was a global variable, that is a factor able to affect the yield of the process in all conditions. On the other hand, an alkaline pH could increase the removal of phenol at 10 °C (25-43%).

Agri-Food Contexts in Mediterranean Regions: Contributions to Better Resources Management

The agri-food frameworks have specific characteristics (production units with small dimensions and in great number with implications in the respective markets) that call for adjusted approaches, even more so when they are considered in Mediterranean contexts (where global warming will have relevant impacts). In fact, the Mediterranean regions and countries have particular specificities (due to their climate conditions) that distinguish them from their neighbours. This is particularly true in Europe, for example, where the southern countries present socioeconomic dynamics (associated with the respective public debt) that are different from those identified in the northern regions. From this perspective, it seems pertinent to analyse the several dimensions of the agri-food systems in the Mediterranean area. To achieve these objectives, a search was carried out on 26 December 2020 on the scientific databases Web of Science Core Collection (WoS) and Scopus for the topics “agr*-food” and “Mediterranean”. These keywords were selected after a previous literature survey and to capture the agri-food contexts in Mediterranean regions. The keyword “agr*-food” was considered in this way to allow for a wider search (including “agri-food”, “agro-food”, etc.). Considering only articles (excluding proceeding papers, book chapters, and books, because in some cases it is difficult to access the entire content of the document), 100 and 117 documents were obtained from the WoS and Scopus, respectively. After removing the duplicated studies and taking into account the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) approach, 137 documents were surveyed through a literature review. As main insights, several dimensions embedded in the concept of agri-food were highlighted, from those related to heritage subjects to natural assets. On the other hand, the following subtopics were identified: agri-food dynamics and sustainability, agriculture and agri-food systems, agri-chains and food consumption, and food production and composition impact on agri-chains. Stressing the gaps in the scientific literature, related to the topics here addressed, there are possibilities to better explore the several dimensions and solutions offered by the new developments associated with smart agriculture and agriculture 4.0, specifically for the Mediterranean contexts and their challenges. Finally, to complement the PRISMA methodologies, an MB2MBA2 (Methodology Based on Benchmarking of Metadata, from scientific databases, and Bibliometric Assessment and Analysis) approach is suggested to carry out systematic literature reviews, based on bibliometric analysis.

Effect of Processing on Phenolic Composition of Olive Oil Products and Olive Mill By-Products and Possibilities for Enhancement of Sustainable Processes

The bio-functional properties of olive oil products and by-products rely greatly on the proportions and types of the endogenous phenolics that may favorably/unfavorably change during various processing conditions. The olive oil industrial activities typically produce (i) olive oils, the main/marketable products, and (ii) olive mill by-products. The mechanical processing of olive oil extraction is making progress in some areas. However, the challenges inherent in the existing system, taking into consideration, the susceptibilities of phenolics and their biosynthetic variations during processing, hamper efforts to ascertain an ideal approach. The proposed innovative means, such as inclusion of emerging technologies in extraction system, show potential for sustainable development of olive oil processing. Another crucial factor, together with the technological advancements of olive oil extraction, is the valorization of olive mill by-products that are presently underused while having great potential for extended/high-value applications. A sustainable re-utilization of these valuable by-products helps contribute to (i) food and nutrition security and (ii) economic and environmental sustainability. This review discusses typical processing factors responsible for the fate of endogenous phenolics in olive oil products/by-products and provides an overview of the possibilities for the sustainable processing to (i) produce phenolic-rich olive oil and (ii) optimally valorize the by-products.

Increasing the Content of Olive Mill Wastewater in Biogas Reactors for a Sustainable Recovery: Methane Productivity and Life Cycle Analyses of the Process

Anaerobic codigestion of olive mill wastewater for renewable energy production constitutes a promising process to overcome management and environmental issues due to their conventional disposal. The present study aims at assessing biogas and biomethane production from olive mill wastewater by performing biochemical methane potential tests. Hence, mixtures containing 0% (blank), 20% and 30% olive mill wastewater, in volume, were experimented on under mesophilic conditions. In addition, life cycle assessment and life cycle costing were performed for sustainability analysis. Particularly, life cycle assessment allowed assessing the potential environmental impact resulting from the tested process, while life cycle costing in conjunction with specific economic indicators allowed performing the economic feasibility analysis. The research highlighted reliable outcomes: higher amounts of biogas (80.22 ± 24.49 NL.kg_SV⁻¹) and methane (47.68 ± 17.55 NL.kg_SV⁻¹) were obtained when implementing a higher amount of olive mill wastewater (30%) (v/v) in the batch reactors. According to life cycle assessment, the biogas ecoprofile was better when using 20% (v/v) olive mill wastewater. Similarly, the economic results demonstrated the profitability of the process, with better performances when using 20% (v/v) olive mill wastewater. These findings confirm the advantages from using farm and food industry by-products for the production of renewable energy as well as organic fertilizers, which could be used in situ to enhance farm sustainability.

Purification of olive mill wastewater through noble metal nanoparticle synthesis: waste safe disposal and nanomaterial impact on healthy hepatic cell mitochondria

The exponential increase of waste derived from different human activities points out the importance of their reuse in order to create materials with specific properties that can be used for different applications. In this work, it was showed how the typical Mediterranean organic liquid waste, namely olive mill wastewater (OMWW), obtained during olive oil production, can be turned into an efficient reactive agent for the production of noble metals gold (Au) and silver nanoparticles (Ag NPs) with very well-defined physico-chemical properties. More than that, it was demonstrated that this synthetic procedure also leads to a drastic decrease of the organic pollution load of the OMWW, making it safer for environmental disposal and plants irrigation. Then, using healthy hepatic cell line mitochondria, the biological effects induced by these green metal NPs surrounded by a polyphenols shell, with the same NPs synthetized through a standard chemical colloidal reduction process, were compared, finding out that the green NPs are much safer.

Optimization of hybrid treatment of olive mill wastewaters through impregnation onto raw cypress sawdust and electrocoagulation

This research investigation proposes a new method for sustainable olive mill wastewater (OMW) treatment and handling. It is based on the combination of its impregnation onto raw cypress sawdust (RCS) followed by electrocoagulation. The retention of OMW compounds onto various RCS doses show an important decrease of its chemical oxygen demand (COD) and its main cation and anion content. The maximum retention efficiencies of COD, Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl^-, [Formula: see text], and [Formula: see text] were about 51.0%, 75.3%, 28.7%, 77.9%, 84.7%, 41.1%, 98.3%, and 90.9%, respectively, for the highest RCS dose (200 g L^-1). This organic matter- and nutrient-loaded biomass could be thermochemically converted through pyrolysis into biofuel and biochar for energetic and agronomic purposes, respectively. The treatment by electrocoagulation of the pre-treated OMW using mild steel electrodes could be considered an attractive treatment method since 75.6% of COD removal efficiency was achieved. Besides, this approach permits a significant energy consumption reduction by 46% as compared with the electrocoagulation process alone. It allows also a significant improvement of the treated effluent quality in terms of both organic and mineral contents that could be reused for the irrigation of olive trees in the context of circular economy.

Wastewater Treatment, Valorization, and Reuse

This Special Issue includes investigations related to wastewater treatment, recovery, and reuse [...]

Olive Stones as Filler for Polymer-Based Composites: A Review

Olives' consumption produces copious agricultural byproducts that have accompanied humanity for millennia, but the increasing worldwide production complicates its management. Most wastes are generated during olive oil production in form of olive stones and other lignocellulosic derivatives. Industrial processes of chemical or physical nature to recover economically compounds from biomass residues are costly, difficult, and non-environmentally friendly. Cellulose, hemicellulose, and lignin biopolymers are the principal components of olive stones, which present interesting qualities as lignocellulosic fillers in polymeric composites. This review will summarize examples of composites based on thermoplastic polymers, such as polystyrene (PS), polylactide (PLA), polyvinyl chloride (PVC), polypropylene (PP), and polycaprolactone (PCL); thermosetting resins (phenol-formaldehyde, unsaturated polyesters, and epoxy) and acrylonitrile butadiene rubber/devulcanized waste rubber (NBR/DWR) blends focusing on the fabrication procedures, characterization, and possible applications. Finally, thanks to the wide disparity in polymer matrix types, the variability in applications is important, from adsorption to mechanical enhancement, showing the easiness and benefit of olive stone integration in many materials.

Application of olive mill waste-based biochars in agriculture: Impact on soil properties, enzymatic activities and tomato growth

The olive oil industry is an important economic sector in Mediterranean countries. However, oil production is unfortunately accompanied by the generation of huge amounts of olive mill solid wastes (OMSW) and olive mill wastewater (OMWW). In the present study, a strategy is proposed for converting these olive mill wastes into biochar through pyrolysis, for their later use as an organic amendment in agriculture. Specifically, two biochars were prepared from the pyrolysis of OMSW at 500 °C, either alone or impregnated with OMWW (OMSW-B and I-OMSW-B). The characterization of the OMSW and I-OMSW samples and their derived biochars showed that the fixed carbon and ash contents in the feedstocks increased by 38% and 11% respectively for OMSW-B, and by 37% and 12% respectively for I-OMSW-B. Interestingly, the impregnation process significantly increased Na, P, K, Ca and Fe contents in the produced biochars. The effect of OMSW-B and I-OMSW-B amendments at different application dose (1%, 2.5% and 5% wt/wt) on the enzymatic activity of an agricultural soil was performed at laboratory scale with a pot test. The experimental results showed that phosphatase and urease activity increased with biochar application rate; amendment with I-OMSW-B at 1%, 2.5% and 5% enhanced the phosphatase activity by 63%, 142% and 285% and urease activity by 50%, 116% and 149%, respectively. On the other hand, dehydrogenase and protease activities were higher for the application rate of 2.5% biochar. Biochar amendment promoted tomatoes seedling growth after 10 weeks, which was highest in the application rates of 2.5% and 5% for both OMSW-B and I-OSMW-B. Thus, the produced biochars had great potential to be used as biofertilizers in agriculture.

Removal of Phenolic Compounds from Olive Mill Wastewater by a Polydimethylsiloxane/oxMWCNTs Porous Nanocomposite

User-friendly and energy-efficient methods able to work in noncontinuous mode for in situ purification of olive mill wastewater (OMW) are necessary. Herein we determined the potential of oxidized multiwalled carbon nanotubes entrapped in a microporous polymeric matrix of polydimethylsiloxane in the removal and recovery of phenolic compounds (PCs) from OMW. The fabrication of the nanocomposite materials was straightforward and evidenced good adsorption capacity. The adsorption process is influenced by the pH of the OMW. Thermodynamic parameters evidenced the good affinity of the entrapped nanomaterial towards phenols. Furthermore, the kinetics and adsorption isotherms are studied in detail. The presence of oil inside the OMW can speed up the uptake process in batch adsorption experiments with respect to standard aqueous solutions, suggesting a possible use of the nanocomposite for fast processing of OMW directly in the tank where they are stored. Moreover, the prepared nanocomposite is safe and can be easily handled and disposed of, thus avoiding the presence of specialized personnel. After the adsorption process the surface of the nanomaterial can be easily regenerated by mild treatments with diluted acetic acid, thus permitting both the recyclability of the nanomaterial and the recovery of phenolic compounds for a possible use as additives in food and nutraceutical industries and the recovery of OMW for fertirrigation.

Impact of Stability of Enriched Oil with Phenolic Extract from Olive Mill Wastewaters

The disposal of olive mill wastewaters is a considerable subject for the development of a sustainable olive oil industry considering their high content of pollutants. Nevertheless, the selective extraction of phenolic compounds from olive mill wastewaters represents a promising approach to obtain phenolics suitable for food enrichment. This work aimed to evaluate the efficiency of phenolic extract addition (50 mg L⁻¹), used as natural antioxidant, in sunflower oil against oxidative deterioration; to this aim, XAD-7-HP resin was tested in the recovery of phenolic compounds from olive mill wastewaters. Ultra-high performance liquid chromatography was used to evaluate the single phenols contained in the extract; the most consistent amount was detected for hydroxytyrosol (834 mg 100 mL⁻¹). The change in the oxidation state of fortified sunflower oil was studied by measuring physicochemical (refractive index, peroxide value and oxidative resistance to degradation) and antioxidant parameters (DPPH, ABTS and ORAC assays) during 90 days of storage. Results showed an enhancement of oxidative stability of 50% in the fortified oil compared to control.