Comparison of four functionalization methods of gold nanoparticles for enhancing the enzyme-linked immunosorbent assay (ELISA)

Quantitative reagent monitoring in paper-based electrochemical rapid diagnostic tests

Paper-based rapid diagnostic tests (RDTs) are an essential component of modern healthcare, particularly for the management of infectious diseases. Despite their utility, these capillary-driven RDTs are compromised by high failure rates, primarily caused by user error. This limits their utility in complex assays that require multiple user operations. Here, we demonstrate how this issue can be directly addressed through continuous electrochemical monitoring of reagent flow inside an RDT using embedded graphenized electrodes. Our method relies on applying short voltage pulses and measuring variations in capacitive discharge currents to precisely determine the flow times of injected samples and reagents. This information is reported to the user, guiding them through the testing process, highlighting failure cases and ultimately decreasing errors. Significantly, the same electrodes can be used to quantify electrochemical signals from immunoassays, providing an integrated solution for both monitoring assays and reporting results. We demonstrate the applicability of this approach in a serology test for the detection of anti-SARS-CoV-2 IgG in clinical serum samples. This method paves the way towards "smart" RDTs able to continuously monitor the testing process and improve the robustness of point-of-care diagnostics.

Detection of carbofuran in fruits and vegetables by Raman spectroscopy combined with immunochromatography

It has long been desired to develop rapid methods for the rapid identification and quantification of pesticides and their metabolites. Carbofuran, a representative pesticide of the carbamate group, is highly systemic and is used on vegetables, fruits and grains, which has led many countries to test for residues in food and the environment. In this study, gold and silver composite core-shell (Au@Ag) nanoparticles were used to label the carbofuran antibody and Raman molecule 5,5-dithiobis-2-nitrobenzoic acid (DTNB) to synthesize Raman immune probes. The signal value of DTNB was read using a Raman spectrometer, and the quantitative detection technology of carbofuran was established based on lateral flow immunochromatographic assay (ICA) combined with surface-enhanced Raman spectroscopy (SERS). SERS-ICA is a rapid, quantitative and ultrasensitive test for the determination of carbofuran in fruits and vegetables with a sensitivity of 0.1 pg mL-1. Consequently, the results demonstrate that the SERS-based lateral flow immunosensor developed in this study has the advantages of excellent assay sensitivity and remarkable multiplexing capability, and thus it will have great application potential in food safety monitoring.

An Artificial Miniaturized Peroxidase for Signal Amplification in Lateral Flow Immunoassays

Signal amplification strategies are widely used for improving the sensitivity of lateral flow immunoassays (LFiAs). Herein, the artificial miniaturized peroxidase Fe(III)-MimochromeVI*a (FeMC6*a), immobilized on gold nanoparticles (AuNPs), is used as a strategy to obtain catalytic signal amplification in sandwich immunoassays on lateral flow strips. The assay scheme uses AuNPs decorated with the mini-peroxidase FeMC6*a and anti-human-IgG as a detection antibody (dAb), for the detection of human-IgG, as a model analyte. Recognition of the analyte by the capture and detection antibodies is first evidenced by the appearance of a red color in the test line (TL), due to the accumulation of AuNPs. Subsequent addition of 3,3',5,5'-tetramethylbenzidine (TMB) induces an increase of the test line color, due to the TMB being converted into an insoluble colored product, catalyzed by FeMC6*a. This work shows that FeMC6*a acts as an efficient catalyst in paper, increasing the sensitivity of an LFiA up to four times with respect to a conventional LFiA. Furthermore, FeMC6*a achieves lower limits of detection that are found in control experiments where it is replaced with horseradish peroxidase (HRP), its natural counterpart. This study represents a significant proof-of-concept for the development of more sensitive LFiAs, for different analytes, based on properly designed artificial metalloenzymes.

Smartphone-based microplate reader for high-throughput quantitation of disease markers in serum

Herein, a smartphone-based portable reader with integrated optics for standard microtiter plates (96 wells) has been designed and demonstrated for high-throughput quantitation of validated biomarkers in serum. The customized optical attachment was simply constructed with a convex lens and a light source, by which the transmitted light through a 96-well microtiter plate was converged for imaging with a smartphone, so that accurate and wide-range reading of the plate can be achieved. More importantly, relying on the digitized colorimetric analysis of the obtained images, concentrations of various biomarkers can be determined directly using the customized mobile app. A set of validated biomarkers for inflammation and infection, C-reactive protein (CRP), serum amyloid A (SAA), and procalcitonin (PCT) have been quantitated with this new system; both the response ranges and limits of detection meet the requirement of clinical tests. The consistency with the results obtained using a commercial microplate reader proves its reliability and precision, augments its potential as a point-of-care diagnostic device for on-site testing or resource-limited settings.

Development and technical validation of an ultrasound nebulizer to deliver intraperitoneal pressurized aerosols in a rat colon cancer peritoneal metastases model

Background/aim

To develop and validate a nebulizer device for anti-cancer research on pressurized intraperitoneal aerosol supply in a preclinical peritoneal metastases (PM) rat model.

Material and methods

For aerosol generation, an ultrasonic nebulizer (USN) was modified. Aerosol analyses were performed ex-vivo by laser diffraction spectrometry (LDS). Intraperitoneal (IP) ^99mtechnetium sodium pertechnetate (^99mTc) aerosol distribution and deposition were quantified by in-vivo single photon emission computed tomography (SPECT/CT) and compared to liquid IP instillation of equivalent volume/doses of ^99mTc with and without capnoperitoneum. PM was induced by IP injection of HCT116-Luc2 human colon cancer cells in immunosuppressed RNU rats. Tumor growth was monitored by bioluminescence imaging (BLI), ¹⁸F-FDG positron emission tomography (PET) and tissues examination at necropsy.

Results

The USN was able to establish a stable and reproducible capnoperitoneum at a pressure of 8 to 10 mmHg. LDS showed that the USN provides a polydisperse and monomodal aerosol with a volume-weighted diameter of 2.6 μm. At a CO₂ flow rate of 2 L/min with an IP residence time of 3.9 s, the highest drug deposition efficiency was found to be 15 wt.-%. In comparison to liquid instillation, nebulization showed the most homogeneous IP spatial drug deposition. Compared to BLI, ¹⁸F-FDG-PET was more sensitive to detect smaller PM nodules measuring only 1–2 mm in diameter. BLI, ¹⁸F-FDG PET and necropsy analyses showed relevant PM in all animals.

Conclusions

The USN together with the PM rat model are suitable for robust and species-specific preclinical pharmacological studies regarding intraperitoneal delivery of pressurized aerosolized drugs and cancer research.

Enhanced Electrochemical Conductivity of Surface-Coated Gold Nanoparticles/Copper Nanowires onto Screen-Printed Gold Electrode

Electrochemical application has been widely used in the study of biosensors. Small biomolecules need a sensitive sensor, as the transducer that can relay the signal produced by biomolecule interactions. Therefore, we are improvising a sensor electrode to enhance electrochemical conductivity for the detection of small DNA molecule interaction. This work describes the enhanced electrochemical conductivity studies of copper nanowires/gold nanoparticles (CuNWs/AuNPs), using the screen-printed gold electrode (SPGE). The AuNPs were synthesized using the Turkevich method as well as characterized by the high-resolution transmission electron microscopy (HRTEM) and ultraviolet-visible (UV-Vis) analysis for the particle size and absorption nature, respectively. Further, the surface morphology and elemental analysis of a series of combinations of different ratios of CuNWs-AuNPs-modified SPGE were analyzed by field emission scanning electron microscopy (FESEM) combined with an energy dispersive X-ray (EDX). The results indicate that the nanocomposites of CuNWs-AuNPs have been randomly distributed and compacted on the surface of SPGE, with AuNPs filling the pores of CuNWs, thereby enhancing its electrochemical conductivity. The cyclic voltammetry (CV) method was used for the evaluation of SPGE performance, while the characterization of the electrochemical conductivity of the electrode modified with various concentrations of AuNPs, CuNWs, and different volumes of dithiopropionic acid (DTPA) has been conducted. Of the various parameters tested, the SPGE modified with a mixture of 5 mg/mL CuNWs and 0.25 mM AuNPs exhibited an efficient electrochemical conductivity of 20.3 µA. The effective surface area for the CuNWs-AuNPs-modified SPGE was enhanced by 2.3-fold compared with the unmodified SPGE, thereby conforming the presence of a large active biomolecule interaction area and enhanced electrochemical activity on the electrode surface, thus make it promising for biosensor application.

Measurement of trace bisphenol A in drinking water with combination of immunochromatographic detection technology and SERS method

Sensitive and selective detection of target analyte is very important in many fields such as commodity inspection and quality monitoring. In this work, based on the principle of competitive immunoassay, surface-enhanced Raman spectroscopy (SERS) was used to establish a rapid and highly sensitive method for the detection of trace amounts of bisphenol A in water. Here, Raman molecule 5,5-dithiobis-2-nitrobenzoic acid and anti-BPA antibody were conjugated with Au (core)@Ag (shell) nanoparticle to serve as SERS nanoprobe. After the SERS nanoprobe is combined with the substance to be tested, it uses the siphon effect to pass through the test line and the charging line on the test strip. And the Raman test was performed on the T line with a Raman spectrometer. The detection limitation was 0.1 pg/mL. Compared with the reported gas chromatography, liquid chromatography, fluorescence analysis, and other detection methods, SERS ICA does not demand complicated sample preparation procedures, and has the advantages of simple detection methods, quick results, High sensitivity, good specificity, and low technical demands for laboratory environment and testers. In addition, Raman spectrometers have gradually developed to be portable, making it easier to meet the needs of on-site rapid and highly sensitive detection, and will show broad prospects for applications in the fields of biomedical diagnosis and food safety monitoring.

Patterning Large-Scale Nanostructured Microarrays on Coverslip for Sensitive Plasmonic Detection of Aqueous Gliadin Traces

User-friendly devices for detecting low gliadin content in commercial foods are of extreme importance for people with gluten diseases. With this concern, the present work proposes a rapid and sensitive optical nanostructured microarrays platform for the detection of gliadin using specific anti-gliadin IgG antibodies immobilized on annealed gold nanostructures (AuNPs) obtained after the high annealing process (550 °C) of gold thin films evaporated on commercial glass coverslips. Localized Surface Plasmon Resonance (LSPR) immunosensing of gliadin in the range of 0.1 ppm to 1000 ppm is successfully achieved. In addition, the biofunctionalization protocol was used for gluten screening in five food complex products.

Highly sensitive magnetic relaxation sensing method for aflatoxin B1 detection based on Au NP-assisted triple self-assembly cascade signal amplification

Highly sensitive detection of aflatoxin B₁ (AFB₁) is of great significance because of its high toxicity and carcinogenesis. We propose a magnetic relaxation sensing method based on gold nanoparticles (Au NPs)-assisted triple self-assembly cascade signal amplification for highly sensitive detection of AFB₁. Both AFB₁ antibody and initiator DNA (iDNA) are labeled on Au NPs to form Ab-Au-iDNA probe. iDNA is enriched by Au NPs to achieve first signal amplification. Different amounts of Ab-Au-iDNA were bound with AFB₁ antigen by indirect competitive immunoassay, and then hybridization chain reaction event was initiated by iDNA to produce long hybridization chain reaction products to enrich more horseradish peroxidase-streptavidin for the second signal amplification. Dopamine could be rapidly converted to polydopamine by HRP catalysis, which is used as the third signal amplification. The Fe³⁺ solution, providing paramagnetic ions with a strong magnetic signal, could be adsorbed by the polydopamine due to the formation of coordination bonds of phenolic hydroxyl groups with Fe³⁺. This effective interaction between polydopamine and Fe³⁺ significantly changes the transverse relaxation time signal of Fe³⁺ supernatant solution, which can be used as a magnetic probe for highly sensitive detection of AFB₁. The sensor exhibited high specificity and sensitivity with a detection limit of 0.453 pg/mL owing to the Au NP-assisted triple self-assembly cascade signal amplification strategy. It has been successfully employed for AFB₁ detection in animal feed samples with consistent results of enzyme linked immune sorbent assay and high-performance liquid chromatography.

Challenges in Detection of Serum Oncoprotein: Relevance to Breast Cancer Diagnostics

Breast cancer is a highly prevalent malignancy that shows improved outcomes with earlier diagnosis. Current screening and monitoring methods have improved survival rates, but the limitations of these approaches have led to the investigation of biomarker evaluation to improve early diagnosis and treatment monitoring. The enzyme-linked immunosorbent assay (ELISA) is a specific and robust technique ideally suited for the quantification of protein biomarkers from blood or its constituents. The continued clinical relevancy of this assay format will require overcoming specific technical challenges, including the ultra-sensitive detection of trace biomarkers and the circumventing of potential assay interference due to the expanding use of monoclonal antibody (mAb) therapeutics. Approaches to increasing the sensitivity of ELISA have been numerous and include employing more sensitive substrates, combining ELISA with the polymerase chain reaction (PCR), and incorporating nanoparticles as shuttles for detection antibodies and enzymes. These modifications have resulted in substantial boosts in the ability to detect extremely low levels of protein biomarkers, with some systems reliably detecting antigen at sub-femtomolar concentrations. Extensive utilization of mAb therapies in oncology has presented an additional contemporary challenge for ELISA, particularly when both therapeutic and assay antibodies target the same protein antigen. Resolution of issues such as epitope overlap and steric hindrance requires a rational approach to the design of diagnostic antibodies that takes advantage of modern antibody generation pipelines, epitope binning techniques and computational methods to strategically target biomarker epitopes. This review discusses technical strategies in ELISA implemented to date and their feasibility to address current constraints on sensitivity and problems with interference in the clinical setting. The impact of these recent advancements will depend upon their transformation from research laboratory protocols into facile, reliable detection systems that can ideally be replicated in point-of-care devices to maximize utilization and transform both the diagnostic and therapeutic monitoring landscape.

Non-Specific Binding and Cross-Reaction of ELISA: A Case Study of Porcine Hemoglobin Detection

Different types of enzyme-linked immunosorbent assays (ELISA) have been widely used to control food safety and quality. To develop an accurate and reproducible ELISA, false immunodetection results caused by non-specific binding (NSB) and cross-reaction must be prevented. During the case study of sandwich ELISA development for the detection of porcine hemoglobin (P_Hb), several critical factors leading to NSB and cross-reaction were found. First, to reduce the NSB of the target analyte, the selection of microplate and blocker was discussed. Second, cross-reactions between enzyme-labeled secondary antibodies and sample proteins were demonstrated. In addition, the function of (3-aminopropyl)triethoxysilane (APTES) was evaluated. Overall, this study highlights the essence of both antibody and assay validation to minimize any false-positive/negative immunodetection results.

Surface engineering strategies of gold nanomaterials and their applications in biomedicine and detection

Gold nanomaterials have potential applications in biosensors and biomedicine due to their controllable synthesis steps, high biocompatibility, low toxicity and easy surface modification. However, there are still various limitations including low water solubility and stability, which greatly affect their applications. In addition, some synthetic methods are very complicated and costly. Therefore, huge efforts have been made to improve their properties. This review mainly introduces the strategies for surface modification of gold nanomaterials, such as amines, biological small molecules and organic small molecules as well as the biological applications of these functionalized AuNPs. We aim to provide effective ideas for better functionalization of gold nanomaterials in the future.

Lateral flow device for water fecal pollution assessment: from troubleshooting of its microfluidics using bioluminescence to colorimetric monitoring of generic Escherichia coli

Water is the most important ingredient of life. Water fecal pollution threatens water quality worldwide and has direct detrimental effects on human health and the global economy. Nowadays, assessment of water fecal pollution relies on time-consuming techniques that often require well-trained personnel and highly-equipped laboratories. Therefore, faster, cheaper, and easily-used systems are needed to in situ monitor water fecal pollution. Herein, we have developed colorimetric lateral flow strips (LFS) able to detect and quantify Escherichia coli species in tap, river, and sewage water samples as an indicator of fecal pollution. The combination of LFS with a simple water filtration unit and a commercially available colorimetric reader enhanced the assay sensitivity and enabled more accurate quantification of bacteria concentration down to 104 CFU mL-1 in 10 minutes, yielding recovery percentages between 80% and 90% for all water samples analyzed. Overall, this system allows for monitoring and assessing water quality based on E. coli species as a standard microbiological indicator of fecal pollution. Furthermore, we have developed a novel bioluminescent, bacteria-based method to quickly characterize the performance of a great variety of LFS materials. This new method allows evaluating the flow rate of big analytes such as bacteria through the LFS materials, as a suggestive means for selecting the appropriate materials for fabricating LFS targeting big analytes (≈2 μm). As a whole, the proposed approach can accelerate and reduce the costs of water quality monitoring and pave the way for further improvement of fecal pollution detection systems.

Gold nanoparticles-based assays for biodetection in urine

Urine is a biofluid easy to collect through a non-invasive technique that allows collecting a large volume of sample. The use of urine for disease diagnosis is not yet well explored. However, it has gained attention over the last three years. It has been applied in the diagnosis of several illnesses such as kidney disease, bladder cancer, prostate cancer and cardiovascular diseases. In the last decade, gold nanoparticles (Au NPs) have attracted attention in biosensors' development for the diagnosis of diseases due to their electrical and optical properties, ability to conjugate with biomolecules, high sensitivity, and selectivity. Therefore, this article aims to present a comprehensive view of state of the art on the advances made in the quantification of analytes in urinary samples using AuNPs based assays, with a focus on protein analysis. The type of diagnosis methods, the Au NPs synthesis approaches and the strategies for surface modification aiming at selectivity towards the different targets are highlighted.

A sensitive immunosensor based on FRET between gold nanoparticles and InP/ZnS quantum dots for arginine kinase detection

Arginine kinase (AK) is one of the most important allergens in shrimp products. Herein, a novel immunoassay for quantitation of AK was developed using the antibody modified gold nanoparticle (AuNP) and quantum dot (QD). When the first antibody modified AuNP (AuNP-Ab1) was bridged by AK with the secondary antibody modified QD (QD-Ab2), fluorescence resonance energy transfer (FRET) would occur between the AuNP and QD, which led to a decrease in fluorescent signals. The decrease in fluorescence intensity was found to correlate linearly with the log of AK concentration in the range of 1.0 × 10^-6-1.0 × 10^-3 mg/mL (R² = 0.9909) and the detection limit was 0.11 ng/mL. The immunoassay was further proved to have encouraging specificity, precision and accuracy. Compared with existing methods, this study provided a promising approach to develop a highly sensitive and selective detection method for AK in shrimp related food samples.

Antibody cooperative adsorption onto AuNPs and its exploitation to force natural killer cells to kill HIV-infected T cells

HIV represents a persistent infection which negatively alters the immune system. New tools to reinvigorate different immune cell populations to impact HIV are needed. Herein, a novel nanotool for the specific enhancement of the natural killer (NK) immune response towards HIV-infected T-cells has been developed. Bispecific Au nanoparticles (BiAb-AuNPs), dually conjugated with IgG anti-HIVgp120 and IgG anti-human CD16 antibodies, were generated by a new controlled, linker-free and cooperative conjugation method promoting the ordered distribution and segregation of antibodies in domains. The cooperatively-adsorbed antibodies fully retained the capabilities to recognize their cognate antigen and were able to significantly enhance cell-to-cell contact between HIV-expressing cells and NK cells. As a consequence, the BiAb-AuNPs triggered a potent cytotoxic response against HIV-infected cells in blood and human tonsil explants. Remarkably, the BiAb-AuNPs were able to significantly reduce latent HIV infection after viral reactivation in a primary cell model of HIV latency. This novel molecularly-targeted strategy using a bispecific nanotool to enhance the immune system represents a new approximation with potential applications beyond HIV.

Comprehensive characterization of gold nanoparticles and their protein conjugates used as a label by hollow fiber flow field flow fractionation with photodiode array and fluorescence detectors and multiangle light scattering

Most of lateral flow immunoassay (LFIA) devices rely on gold nanoparticles (GNP) labeled antibodies or other biospecific proteins, to achieve reagent-less color-based detection. GNP size, GNP-protein conjugation level and its stability are crucial points for the development of precise and accurate methods. In addition, the purification of the GNP-protein conjugates from unreacted protein and GNP, is necessary for adequate analytical performance of the assay. To assist the synthesis and production process of GNP and their protein conjugates, we use for the first time a non-destructive, particle separation-multi-detection approach based on miniaturized flow field flow fractionation (HF5). A separation method was developed to baseline size-separate GNP, GNP-protein, protein and GNP including BSA used as a surface coater in less than 30 minutes. Freshly synthesized GNP were first characterized and then conjugated with two different model antibodies: a mouse immunoglobulin (IgG) and a fluorescein-labeled mouse immunoglobulin (FITC-IgG). The IgG-GNP complexes were fractionated using the HF5 apparatus, able to separate IgG-GNP from free proteins by their hydrodynamic size, allowing purification of the conjugation product. Both IgG-GNPs and GNPs were characterized according to their size by the MALS detector, and according to their Surface Plasmon Resonance and spectrum by UV-Vis detection, improving the results obtained via batch characterization. This simple non-invasive approach is very useful for the LFIA development and optimization: the use of HF5-mutidetection offers a unique tool for this purpose facilitating the industrialization of the process and the relate optimization and standardization.

Development of Diagnostic Tests for Detection of SARS-CoV-2

One of the most effective ways to prevent the spread of the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) is to develop accurate and rapid diagnostic tests. There are a number of molecular, serological, and imaging methods that are used to diagnose this infection in hospitals and clinical settings. The purpose of this review paper is to present the available approaches for detecting SARS-CoV-2 and address the advantages and limitations of each detection method. This work includes studies from recent literature publications along with information from the manufacturer's manuals of commercially available SARS-CoV-2 diagnostic products. Furthermore, supplementary information from the Food & Drug Administration (FDA), Centers for Disease Control and Prevention (CDC), and World Health Organization (WHO) is cited. The viral components targeted for virus detection, the principles of each diagnostic technique, and the detection efficiency of each approach are discussed. The potential of using diagnostic tests that were originally developed for previous epidemic viruses is also presented.

Enzyme-Antibody-Modified Gold Nanoparticle Probes for the Ultrasensitive Detection of Nucleocapsid Protein in SFTSV

As humans and climate change continue to alter the landscape, novel disease risk scenarios have emerged. Sever fever with thrombocytopenia syndrome (SFTS), an emerging tick-borne infectious disease first discovered in rural areas of central China in 2009, is caused by a novel bunyavirus (SFTSV). The potential for SFTS to spread to other countries in combination with its high fatality rate, possible human-to-human transmission, and extensive prevalence among residents and domesticated animals in endemic regions make the disease a severe threat to public health. Because of the lack of preventive vaccines or useful antiviral drugs, diagnosis of SFTS is the key to prevention and control of the SFTSV infection. The development of serological detection methods will greatly improve our understanding of SFTSV ecology and host tropism. We describe a highly sensitive protein detection method based on gold nanoparticles (AuNPs) and enzyme-linked immunosorbent assay (ELISA)—AuNP-based ELISA. The optical sensitivity enhancement of this method is due to the high loading efficiency of AuNPs to McAb. This enhances the concentration of the HRP enzyme in each immune sandwich structure. The detection limit of this method to the nucleocapsid protein (NP) of SFTSV was 0.9 pg mL⁻¹ with good specificity and reproducibility. The sensitivity of AuNP-based ELISA was higher than that of traditional ELISA and was comparable to real-time quantitative polymerase chain reaction (qRT-PCR). The probes are stable for 120 days at 4 °C. This can be applied to diagnosis and hopefully can be developed into a commercial ELISA kit. The ultrasensitive detection of SFTSV will increase our understanding of the distribution and spread of SFTSV, thus helping to monitor the changes in tick-borne pathogen SFTSV risk in the environment.

Combined Mini-Parasep SF and Nanogold Immunoassay Show Potential in Stool Antigen Immunodetection for Giardiasis Diagnosis

Covalent loading or directional binding of biomolecules on gold nanoparticles (AuNPs) could lead to better results than simple direct adsorption for an enhanced ELISA application. The use of Mini-Parasep solvent-free (SF) without ether or ethyl acetate for the clean and efficient concentration of protozoa cysts, it is a single-use device for in vitro diagnostic use only. In this work, we used Mini-Parasep SF for the detection of giardia cysts in comparison to direct smear and Merthiolate-Iodine Formaldehyde Concentration (MIFC) technique in addition to its use in antigen detection by AuNPs biomolecule loading using rabbit polyclonal antibodies (pAb) against purified Giardia antigen (PGA). As a result, Mini-Parasep SF was the most effective method for Giardia cyst detection and regarding optimization of Mini-Parasep antigen detection, our data showed increased sensitivity and specificity of nano-sandwich ELISA to 92% and 94% respectively and increased positive predictive value (PPV) and negative predictive value (NPV) to 88.64% and 95.91% respectively. In conclusion, this research provides that Mini-Parasep SF concentrator enhanced Giardia cyst detection and improved antigen preparation for AuNPs sandwich ELISA in giardiasis diagnosis. The advantages of this method are the short assay time and the raised accuracy of antigen detection providing concentrated samples without the risk of solvent use and being a disposable Mini-Parasep it helps in giardia antigen purification as well as raising the sensitivity and specificity of ELISA through binding AuNPs.

AuNPs-LISA, an efficient detection assay for Opisthorchis viverrini (Ov) antigen in urine

The enzyme-linked immunosorbent assay (ELISA) is currently a powerful technique for the detection of Opisthorchis viverrini antigen (OvAg) in urine samples. However, its sensitivity and analysis time need to be improved. In the present study, we aimed to improve the signal enhancing system of traditional ELISA by using gold nanoparticles (AuNPs) with peroxidase-like activity on its surface instead of the horseradish peroxidase (HRP) system. The catalytic activity of the AuNPs probe can be boosted by the gold enhancing solution and the addition of ATP. The catalytic ability of the AuNPs probe depended on the probe and the H₂O₂ concentration. The proposed approach can reduce the number of the traditional ELISA steps with better detection sensitivity. Interestingly, the limit of detection (LOD) of the test was 23.4 ng mL^-1, substantially lower than the 93.8 ng mL^-1 for the traditional ELISA. The AuNPs-LISA assay showed higher sensitivity and specificity, 93.81% and 91.34%, respectively, compared to the traditional ELISA. The proposed assay was successfully applied for the detection of OvAg in urine samples. This will provide an effective tool for the detection, control and elimination of human opisthorchiasis.

Optimized Immobilization of Biomolecules on Nonspherical Gold Nanostructures for Efficient Localized Surface Plasmon Resonance Biosensing

Plasmonic biosensing techniques employ metal nanostructures, commonly gold (Au), often with biomolecules attached to their surfaces either directly or via other linkers. Various surface chemistry methods based on dispersion and covalent interactions are used to attach biomolecules to Au. As a result, when immobilizing a molecule on a metal surface, quantitative estimates of binding efficiency and stability of these surface chemistry methods are needed. Most prior work to compare such methods deals with bulk/thin film configurations or spherical nanoparticles, and very little is known about immobilization of biomolecules on plasmonic nanostructures of different shapes. Besides, due to rapid advancement of modern nanofabrication techniques, there is a growing need to determine an efficient surface chemistry method for immobilization of biomolecules on nonspherical plasmonic nanostructures. Previous comparison of immobilization methods on spherical Au nanoparticles has shown that physical adsorption resulted in the highest concentration of immobilized antibodies. In our work, we conducted a similar study and compared four representative Au surface functionalization methods as well as estimated how efficient these methods are at attaching biomolecules to nonspherical plasmonic Au nanostructures. We estimated the concentration of immobilized antibody that is specific to human C-reactive protein (anti-hCRP) by measuring the localized surface plasmon resonance (LSPR) shifts after exposing the surface of Au nanostructures to the antibody. Our results differ from the previously reported ones since the highest concentration of anti-hCRP was immobilized using 11-mercaptoundecanoic acid (MUA) chemistry. We demonstrated that immobilized antibodies retained their stability and specificity toward hCRP throughout the immunoassay when diluted hCRP or hCRP-spiked human serum samples were used. These findings have important implications for the fields of biosensing and diagnostics that employ nonspherical plasmonic nanostructures since an overall performance of these devices depends on efficient biomolecule immobilization.

Optimization and Structural Stability of Gold Nanoparticle-Antibody Bioconjugates

Gold nanoparticles (AuNPs) bound with biomolecules have emerged as suitable biosensors exploiting unique surface chemistries and optical properties. Many efforts have focused on antibody bioconjugation to AuNPs resulting in a sensitive bioconjugate to detect specific types of bacteria. Unfortunately, bacteria thrive under various harsh environments, and an understanding of bioconjugate stability is needed. Here, we show a method for optimizing Listeria monocytogenes polyclonal antibodies bioconjugation mechanisms to AuNPs via covalent binding at different pH values, from 2 to 11, and 2-(N-morpholino)ethanesulfonic acid (MES), 3-(N-morpholino)propanesulfonic acid, NaOH, HCl conditions. By fitting Lorentz curves to the amide I and II regions, we analyze the stability of the antibody secondary structure. This shows an increase in the apparent breakdown of the antibody secondary structure during bioconjugation as pH decreases from 7.9 to 2. We find variable adsorption efficiency, measured as the percentage of antibody adsorbed to the AuNP surface, from 17 to 27% as pH increases from 2 to 6 before decreasing to 8 and 13% at pH 7.9 and 11, respectively. Transmission electron microscopy (TEM) analysis reveals discrepancies between size and morphological changes due to the corona layer assembly from antibody binding to single nanoparticles versus aggregation or cluster self-assembly into large aggregates. The corona layer formation size increases from 3.9 to 5.1 nm from pH 2 to 6, at pH 7.9, there is incomplete corona formation, whereas at pH 11, there is a corona layer formed of 6.4 nm. These results indicate that the covalent binding process was more efficient at lower pH values; however, aggregation and deactivation of the antibodies were observed. We demonstrate that optimum bioconjugation condition was determined at pH 6 and MES buffer-type by indicators of covalent bonding and stability of the antibody secondary structure using Fourier transform-infrared, the morphological characteristics and corona layer formation using TEM, and low wavelength shifts of ultraviolet-visible after bioconjugation.

Antibodies Irreversibly Adsorb to Gold Nanoparticles and Resist Displacement by Common Blood Proteins

Gold nanoparticles (AuNPs) functionalized with proteins to impart desirable surface properties have been developed for many nanobiotechnology applications. A strong interaction between the protein and nanoparticle is critical to the formation of a stable conjugate to realize the potential of these emerging technologies. In this work, we examine the robustness of a protein layer adsorbed onto gold nanoparticles while under the stress of a physiological environment that could potentially lead to protein exchange on the nanoparticle surface. The adsorption interaction of common blood plasma proteins (transferrin, human serum albumin, and fibrinogen) and anti-horseradish peroxidase antibody onto AuNPs is investigated by nanoparticle tracking analysis. Our data show that a monolayer of protein is formed at saturation for each protein, and the maximum size increase for the conjugate, relative to the AuNP core, correlates with the protein size. The binding affinity of each protein to the AuNP is extracted from a best fit of the adsorption isotherm to the Hill equation. The antibody displays the greatest affinity (K_d = 15.2 ± 0.8 nM) that is ∼20-65 times stronger than the affinity of the other plasma proteins. Antibody-AuNP conjugates were prepared, purified, and suspended in solutions of blood plasma proteins to evaluate the stability of the antibody layer. An enzyme-mediated assay confirms that the antibody-AuNP interaction is irreversible, and the adsorbed antibody resists displacement by the plasma proteins. This work provides insight into the capabilities and potential limitations of antibody-AuNP-enabled technologies in biological systems.

Portable Smartphone-based Colorimetric Analyzer with Enhanced Gold Nanoparticles for On-site Tests of Seafood Safety

Saxitoxin (STX) is one of the paralytic shellfish poisons (PSP) that endanger people's health. It is necessary to develop methods for the on-site rapid detection for STX in order to prevent safety accidents. An enzyme-linked immunosorbent assay (ELISA) is timesaving and effective, but it is not suitable for large-scale in-field tests due to the expensiveness of commercial ELISA kits and the bulkiness of a microtiter plate reader (MTPR). In this study, a portable smartphone-based colorimetric analyzer (SBCA) with a cost-effictive enhanced gold nanoparticle-based ELISA (EGNB-ELISA) was proposed for STX detection. In a bicinchoninic acid (BCA) protein assay (R² = 0.9939) and a glucose assay (R² = 0.9937), SBCA was shown to be in good agreement with MTPR. EGNB-ELISA had a 12.5-fold lower detection limit (0.4 ng/mL) and a lower detection range (1 - 50 ng/mL, Y = 0.4037X + 0.3564, R² = 0.9797) than the classical ELISA. The recovery rate ranged over 89.1 - 112.2%. The whole detection system, combining both homemade SBCA and ENGB-ELISA, is expected to satisfy the needs of on-site STX sample tests to guarantee seafood safety.

Detecting Biothreat Agents: From Current Diagnostics to Developing Sensor Technologies

Although a fundamental understanding of the pathogenicity of most biothreat agents has been elucidated and available treatments have increased substantially over the past decades, they still represent a significant public health threat in this age of (bio)terrorism, indiscriminate warfare, pollution, climate change, unchecked population growth, and globalization. The key step to almost all prevention, protection, prophylaxis, post-exposure treatment, and mitigation of any bioagent is early detection. Here, we review available methods for detecting bioagents including pathogenic bacteria and viruses along with their toxins. An introduction placing this subject in the historical context of previous naturally occurring outbreaks and efforts to weaponize selected agents is first provided along with definitions and relevant considerations. An overview of the detection technologies that find use in this endeavor along with how they provide data or transduce signal within a sensing configuration follows. Current "gold" standards for biothreat detection/diagnostics along with a listing of relevant FDA approved in vitro diagnostic devices is then discussed to provide an overview of the current state of the art. Given the 2014 outbreak of Ebola virus in Western Africa and the recent 2016 spread of Zika virus in the Americas, discussion of what constitutes a public health emergency and how new in vitro diagnostic devices are authorized for emergency use in the U.S. are also included. The majority of the Review is then subdivided around the sensing of bacterial, viral, and toxin biothreats with each including an overview of the major agents in that class, a detailed cross-section of different sensing methods in development based on assay format or analytical technique, and some discussion of related microfluidic lab-on-a-chip/point-of-care devices. Finally, an outlook is given on how this field will develop from the perspective of the biosensing technology itself and the new emerging threats they may face.

Biosensing Based on Nanoparticles for Food Allergens Detection

Food allergy is one of the major health threats for sensitized individuals all over the world and, over the years, the food industry has made significant efforts and investments to offer safe foods for allergic consumers. The analysis of the concentration of food allergen residues in processing equipment, in raw materials or in the final product, provides analytical information that can be used for risk assessment as well as to ensure that food-allergic consumers get accurate and useful information to make their food choices and purchasing decisions. The development of biosensors based on nanomaterials for applications in food analysis is a challenging area of growing interest in the last years. Research in this field requires the combined efforts of experts in very different areas including food chemistry, biotechnology or materials science. However, the outcome of such collaboration can be of significant impact on the food industry as well as for consumer’s safety. These nanobiosensing devices allow the rapid, selective, sensitive, cost-effective and, in some cases, in-field, online and real-time detection of a wide range of compounds, even in complex matrices. Moreover, they can also enable the design of novel allergen detection strategies. Herein we review the main advances in the use of nanoparticles for the development of biosensors and bioassays for allergen detection, in food samples, over the past few years. Research in this area is still in its infancy in comparison, for instance, to the application of nanobiosensors for clinical analysis. However, it will be of interest for the development of new technologies that reduce the gap between laboratory research and industrial applications.

Label-free detection of fibrinogen based on the fibrinogen-enhanced peroxidase activity of a fibrinogen-hemin composite

A simple, label-free colorimetric method for the determination of fibrinogen (Fib) in plasma is presented. In this work, it was observed that Fib interacted with hemin to form a hemin-Fib composite. Because Fib prevented hemin from the formation of m-oxo-dimers, the hemin-Fib composite possesses excellent peroxidase-like activity. Importantly, the peroxidase-like activity of Fib-hemin increased with the increase in the Fib. This allows us to utilize the H₂O₂-ABTS colorimetric system for the quantitative analysis of Fib. This optimized method provided a linear determination range of 2.0-100 pM with a correlation of 0.9975. The limit of detection for Fib was experimentally determined to be 0.7 pM based on a signal-to-noise ratio (S/N) of 3. This novel approach provides a rapid, sensitive, cost efficient and robust bioassay for detection of Fib in pathology and clinical applications.

Chemical modification of antibodies enables the formation of stable antibody–gold nanoparticle conjugates for biosensing

Antibody-modified gold nanoparticles (AuNPs) are central to many novel and emerging biosensing technologies due to the specificity provided by antibody–antigen interactions and the unique properties of nanoparticles.