Facile synthesis of ZnFe2O4 photocatalysts for decolourization of organic dyes under solar irradiation

Formulation of biodegradable alginate-based nano-carriers for in-vitro drug delivery and antibacterial activity

Evaluation of the controlled release of ciprofloxacin (CIP.HCl) and the antibacterial efficacy of alginate (ALG)-based nanocarriers constitute the primary objectives of the current work. Herein, ALG-based nano-structures were prepared by the co-precipitation method and thoroughly analyzed using different characterization techniques, i.e., fourier transform infrared (FT-IR), powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and zeta potential (ZP). The intense peaks emerged at 500, 545, and 750 cm-1 due to the CeO bond. Peaks that appeared at 550-600 cm-1 and 525 cm-1 are due to the stretching vibrations of FeO and ZnO bonds, respectively. Lowering of the peaks from 1640 to 1630 cm-1 and 1420 to 1384 cm-1 were observed in ALG-based nanocomposite (NC) due to the interaction of ALG with metal oxides (MO), which confirmed the formulation of CeO2/ZnFe2O4/ALG nanocomposite. The diffraction peaks at 28.6°, 56.6°, 76.5°, 37°, 47.9°, 62.3°, 74°, 13°, 21° confirmed the synthesis of MO (crystallite size 15.74 nm) and CeO2/ZnFe2O4/ALG (12 nm). In accordance with morphological studies, CeO2/ZnFe2O4 oxides had a uniform distribution throughout the relatively smooth and permeable surface of the ALG-based NC. Ciprofloxacin (CIP) was used as a model drug. Negative values of ZP revealed that CIP-loaded nanocomposite (CeO2/ZnFe2O4/ALG/CIP) had more stability than CeO2/ZnFe2O4/ALG. The maximum percentage of loading around 25 % on ALG NC was examined using the optical density (OD) method at pH 5.5. Correlation coefficients from the first order (0.971), Korsmeyer (0.9858), and Hixson (0.9021) models show the best-fitted models of the release profile in all circumstances. The release mechanism was investigated using various kinetics models. The controlled drug released was observed around 17 % at 40 °C after 3 h at pH 7.4, which is almost identical to the body temperature of a human, which is 37 °C. Similarly, after 24 h, sustained and controlled in-vitro release of the drug was studied, and it was 37, 72, and 74 % at pH 2.2, 7.4, and 9.4, respectively. Thus, prepared ALG-based NC is suitable for the controlled in-vitro release of (CIP.HCl). Metal oxides (CeO2/ZnFe2O4) and ALG-based nanocomposite (CeO2/ZnFe2O4/ALG) showed great antibacterial activity against Staphylococcus aureus (S. aureus) like 15 mm and 14 mm than Escherichia coli (E. coli).

Biogenic Punica granatum Flower Extract Assisted ZnFe2O4 and ZnFe2O4-Cu Composites for Excellent Photocatalytic Degradation of RhB Dye

Globally, the textile industry contributes to pollution through accidental discharges or discharge of contaminated wastewater into waterways, significantly affecting water quality. These pollutants, including dye molecules, are environmental hazards for aquatic and terrestrial life. The field of visible light-mediated photocatalysis has experienced rapid growth, driven by the utilization of photocatalysts that can absorb low-energy visible light and effectively degrade dyes. In the present study, we report a simple method to controllably synthesize Fe2O3, ZnO, and ZnFe2O4 using the one-pot synthesis method. In the subsequent step, copper (Cu) was deposited on the surface of ZnFe2O4 (forming ZnFe2O4-Cu) using a facile, green, and cost-effective method. The synthesized samples were characterized using various techniques, including XRD, UV-Vis DRS, FT-IR, SEM-EDX, HR-TEM, XPS, PL, and BET analysis. These techniques were employed to investigate the composition, morphology, structure, and photophysical properties of as-prepared samples. The ZnFe2O4-Cu nanocomposite demonstrated efficient photocatalytic activity for degrading RhB dye pollutants under visible light. The photocatalyst was successfully reused for three consecutive cycles without significantly decreasing performance. Furthermore, during the study, the radical scavenging test emphasized the role of different radicals in the degradation of dye pollutants. This research has the potential to enable the efficient production of high-performance photocatalysts that can rapidly eliminate ecologically harmful dyes from aqueous solutions.

One-step preparation, characterization, and anticancer potential of ZnFe2O4/RGO nanocomposites

Zinc ferrite nanoparticles (ZnFe2O4 NPs) have attracted extensive attention for their diverse applications including sensing, waste-water treatment, and biomedicine. The novelty of the present work is the fabrication of ZnFe2O4/RGO NCs by using a one-step hydrothermal process to assess the influence of RGO doping on the physicochemical properties and anticancer efficacy of ZnFe2O4 NPs. X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy-dispersive X-ray(EDX), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), UV-vis spectroscopy, and Photoluminescence (PL) spectroscopy were employed to characterize prepared pure ZnFe2O4 NPs and ZnFe2O4/ RGO NCs. XRD results showed that the synthesized samples have high crystallinity. Furthermore, the average crystal sizes of ZnFe2O4 nanoparticles (NPs) and ZnFe2O4/RGO nanocomposites (NCs) were 51.08 nm and 54.36 nm, respectively. SEM images revealed that pure ZnFe2O4 NPs were spherical in shape with uniformly loaded on the surface of the RGO nanosheet. XPS and EDX analysis confirmed the elemental compositions of ZnFe2O4/RGO NCs. Elemental mapping of SEM shows that the elemental compositions (Zn, Fe, O, and C) were homogeneously distributed in ZnFe2O4/RGO NCs. The intensity of FT-IR spectra depicted that pure ZnFe2O4 NPs were successfully anchored into the RGO nanosheet. An optical study suggested that the band gap energy of ZnFe2O4/RGO NCs (1.61 eV) was lower than that of pure ZnFe2O4 NPs (1.96 eV). PL spectra indicated that the recombination rate of the ZnFe2O4/ RGO NCs was lower than ZnFe2O4 NPs. MTT assay was used to evaluate the anticancer performance of ZnFe2O4 /RGO NCs and pure ZnFe2O4NPs against human cancer cells. In vitro study indicates that ZnFe2O4 /RGO NCs have higher anticancer activity against human breast (MCF-7) and lung (A549) cancer cells as compared to pure form ZnFe2O4 NPs. This work suggests that RGO doping enhances the anticancer activity of ZnFe2O4NPs by tuning its optical behavior. This study warrants future research on potential therapeutic applications of these types of nanocomposites.

Optimization of the photocatalytic degradation of phenol using superparamagnetic iron oxide (Fe3O4) nanoparticles in aqueous solutions

The present work was carried out to remove phenol from aqueous medium using a photocatalytic process with superparamagnetic iron oxide nanoparticles (Fe3O4) called SPIONs. The photocatalytic process was optimized using a central composite design based on the response surface methodology. The effects of pH (3-7), UV/SPION nanoparticles ratio (1-3), contact time (30-90 minutes), and initial phenol concentration (20-80 mg L-1) on the photocatalytic process were investigated. The interaction of the process parameters and their optimal conditions were determined using CCD. The statistical data were analyzed using a one-way analysis of variance. We developed a quadratic model using a central composite design to indicate the photocatalyst impact on the decomposition of phenol. There was a close similarity between the empirical values gained for the phenol content and the predicted response values. Considering the design, optimum values of pH, phenol concentration, UV/SPION ratio, and contact time were determined to be 3, 80 mg L-1, 3, and 60 min, respectively; 94.9% of phenol was eliminated under the mentioned conditions. Since high values were obtained for the adjusted R2 (0.9786) and determination coefficient (R2 = 0.9875), the response surface methodology can describe the phenol removal by the use of the photocatalytic process. According to the one-way analysis of variance results, the quadratic model obtained by RSM is statistically significant for removing phenol. The recyclability of 92% after four consecutive cycles indicates the excellent stability of the photocatalyst for practical applications. Our research findings indicate that it is possible to employ response surface methodology as a helpful tool to optimize and modify process parameters for maximizing phenol removal from aqueous solutions and photocatalytic processes using SPIONs.

Photocatalytic Activities of g-C3N4 (CN) Treated with Nitric Acid Vapor for the Degradation of Pollutants in Wastewater

In this article, we reported a novel setup treatment using nitric acid vapor to treat g-C₃N₄ (CN). By treatment with nitric acid vapour, the basic structure of the CN has not been destroyed. These adoptive treatments enhanced the photocatalytic performance of CN and were reflected in the elimination of rhodamine B (RhB) as well as tetracycline hydrochloride (TC). In comparison to CN, CN-6 demonstrated the highest photocatalytic yield for the breakdown of RhB (99%, in 20 min). Moreover, the excellent reuse of CN-6 for breaking down RhB was also demonstrated. This clearly demonstrated that treatment with nitric acid vapor promoted a blue shift, positively extended its valence band position, and increased the oxidizability of the holes. This also caused CN to disperse better into the aqueous phase, introducing more oxygen-containing functional groups. Thus, treatment with nitric acid vapor has the potential to be applied to delaminate the CN in order to enhance photocatalytic activity.

Recent advances in structural engineering of photocatalysts for environmental remediation

Photocatalysis appears to be an appealing approach for environmental remediation including pollutants degradation in water, air, and/or soil, due to the utilization of renewable and sustainable source of energy, i.e., solar energy. However, their broad applications remain lagging due to the challenges in pollutant degradation efficiency, large-scale catalyst production, and stability. In recent decades, massive efforts have been devoted to advance the photocatalysis technology for improved environmental remediation. In this review, the latest progress in this aspect is overviewed, particularly, the strategies for improved light sensitivity, charge separation, and hybrid approaches. We also emphasize the low efficiency and poor stability issues with the current photocatalytic systems. Finally, we provide future suggestions to further enhance the photocatalyst performance and lower its large-scale production cost. This review aims to provide valuable insights into the fundamental science and technical engineering of photocatalysis in environmental remediation.

Synthesis of neodymium ferrite incorporated graphitic carbonitride (NdFe2O4@g-C3N4) and its application in the photodegradation of ciprofloxacin and ampicillin in a water system

Purification of antibiotic-contaminated drinking water sources is faced with limitations. Therefore, this study incorporated neodymium ferrite (NdFe2O4) in graphitic carbonitride (g-C3N4) to form NdFe2O4@g-C3N4 as a photocatalyst for removing ciprofloxacin (CIP) and ampicillin (AMP) from aqueous systems. X-ray diffraction (XRD) revealed a crystallite size of 25.15 nm for NdFe2O4 and 28.49 nm for NdFe2O4@g-C3N4. The bandgap is 2.10 and 1.98 eV for NdFe2O4 and NdFe2O4@g-C3N4, respectively. The transmission electron micrograph (TEM) images of NdFe2O4 and NdFe2O4@g-C3N4 gave an average particle size of 14.10 nm and 18.23 nm, respectively. Scanning electron micrograph (SEM) images showed heterogeneous surfaces with irregular-sized particles suggesting agglomeration at the surfaces. NdFe2O4@g-C3N4 (100.00 ± 0.00% for CIP and 96.80 ± 0.80% for AMP) exhibited better photodegradation efficiency towards CIP and AMP than NdFe2O4 (78.45 ± 0.80% for CIP and 68.25 ± 0.60% for AMP) in a process described by pseudo-first-order kinetics. NdFe2O4@g-C3N4 showed a stable regeneration capacity towards degradation of CIP and AMP with a capacity that is above 95% even at the 15th cycle of treatment. The use of NdFe2O4@g-C3N4 in this study revealed its potential as a promising photocatalyst for removing CIP and AMP in water systems.

Multipollutant Abatement through Visible Photocatalytic System

Water pollution damages the aquatic environment due to the presence of organic contaminants, which in turn is distressing to the ecosystem. Photocatalytic activity is a greener and promising method to degrade these organic contaminants. In this research, we present the degradation of diverse water pollutants through zinc/iron oxide nanoparticles serving as photocatalysts. The photocatalyst was studied for its efficiency to photodegrade congo red, brilliant green and para nitro phenol. Moreover, it also presented an antibacterial activity against the bacterium E. coli. Photocatalyst was characterized via X-ray diffraction, scanning electron microscopy-energy dispersive X-ray spectroscopy, and fourier-transform infrared spectroscopy. Tauc plot was used to measure the optical band gap (1.84 eV). The effect of various parameters such as catalyst dose, contact time, dye dose/concentration and pH were also investigated to determine the optimum point of maximum degradation through response surface methodology. A face-centered composite design was used, and a quadratic model was followed by congo red, brilliant green dyes and para nitrophenol. The maximum photodegradation efficiencies were 99%, 94.3%, and 78.5% for congo red, brilliant green and phenol, respectively. Quantum yield for congo red, brilliant green and para-nitrophenol were 9.62 × 10−8, 1.17 × 10−7 and 4.11 × 10−7 molecules/photons, while the reaction rates were 27.1 µmolg−1h−1, 29.61 µmolg−1h−1 and 231 µmolg−1h−1, respectively.

Incorporating nitrogen vacancies in exfoliated B-doped g-C3N4 towards improved photocatalytic ciprofloxacin degradation and hydrogen evolution

The e-BCN fabricated from the double calcination process exhibited significant photocatalytic activity towards photocatalytic ciprofloxacin degradation and hydrogen generation.

Zinc ferrite-graphitic carbon nitride nanohybrid for photo-catalysis of the antibiotic ciprofloxacin

2D hybrid sheets of zinc ferrite and graphitic carbon nitride were explored for their application as a UV catalyst for the degradation of ciprofloxacin.

One-Step Microwave-Assisted Synthesis and Visible-Light Photocatalytic Activity Enhancement of BiOBr/RGO Nanocomposites for Degradation of Methylene Blue

In this study, bismuth oxybromide/reduced graphene oxide (BiOBr/RGO), i.e. BiOBr-G nanocomposites, were synthesized using a one-step microwave-assisted method. The structure of the synthesized nanocomposites was characterized using Raman spectroscopy, X-ray diffractometry (XRD), photoluminescence (PL) emission spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), and ultraviolet-visible diffuse reflection spectroscopy (DRS). In addition, the ability of the nanocomposite to degrade methylene blue (MB) under visible light irradiation was investigated. The synthesized nanocomposite achieved an MB degradation rate of above 96% within 75 min of continuous visible light irradiation. In addition, the synthesized BiOBr-G nanocomposite exhibited significantly enhanced photocatalytic activity for the degradation of MB. Furthermore, the results revealed that the separation of the photogenerated electron-hole pairs in the BiOBr-G nanocomposite enhanced the ability of the nanocomposite to absorb visible light, thus improving the photocatalytic properties of the nanocomposites. Lastly, the MB photo-degradation mechanism of BiOBr-G was investigated, and the results revealed that the BiOBr-G nanocomposites exhibited good photocatalytic activity.

Structural and electrochemical investigation of crystallite size controlled zinc ferrite (ZnFe2O4)

Zinc ferrite, ZnFe₂O₄(ZFO), is a promising electrode material for next generation Li-ion batteries because of its high theoretical capacity and low environmental impact. In this report, synthetic control of crystallite size from the nanometer to submicron scale enabled probing of the relationships between ZFO size and electrochemical behavior. A facile two-step coprecipitation and annealing preparation method was used to prepare ZFO with controlled sizes ranging ∼9 to >200 nm. Complementary synchrotron and electron microscopy techniques were used to characterize the series of materials. Increasing the annealing temperature increased crystallinity and decreased microstrain, while local structural ordering was maintained independent of crystallite size. Electrochemical characterization revealed that the smaller sized materials delivered higher capacities during initial lithiation. Larger sized particles exhibited a lack of distinct electrochemical signatures above 1.0 V, suggesting that the longer diffusion length associated with greater crystallite size causes the lithiation process to proceed via non discrete lithium insertion, cation migration, and conversion processes. Notably, larger particles exhibited enhanced electrochemical reversibility over 50 cycles, with capacity retention improving from <20% to >40% at C/2 cycling rate. This intriguing result was probed through x-ray absorption spectroscopy (XAS) and x-ray photoelectron spectroscopy (XPS) measurements of the cycled electrodes. XAS revealed that the larger crystallite size materials do not completely convert to Fe⁰during the first lithiation and that independent of size, delithiation results in the formation of nanocrystalline FeO and ZnO phases rather than ZnFe₂O₄. After 20 cycles, the larger crystallites showed reversibility between partially oxidized FeO in the charged state and Fe⁰in the discharged state, while the smaller crystallite size material was electrochemically inactive as Fe⁰. XPS analysis revealed more significant solid electrolyte interphase (SEI) formation on the cycled electrodes utilizing ZFO with smaller crystallite size. This finding suggests that excessive SEI buildup on the smaller sized, higher surface area ZFO particles contributes to their reduced electrochemical reversibility relative to the larger crystallite size materials.

Mesoporous ferromagnetic manganese ferrite nanoparticles for enhanced visible light mineralization of azoic dye into nontoxic by-products

In this study, a one pot facile synthesis of ferromagnetic manganese ferrite nanoparticles (MnFe₂O₄) was carried out using chemical co-precipitation method for mineralization of azo dye (Congo red (CR)) in aqueous solution under visible light irradiation. The synthesized MnFe₂O₄ nanoparticles were highly crystalline and showed face-centred cubic (FCC) structure with average particle size of 58 ± 4 nm. The BET analysis of the MnFe₂O₄ nanoparticles revealed the mesoporous distribution of material with high surface area can provide large electro active sites and short diffusion paths for the transport of ions which plays a vital role in the photocatalytic degradation of CR. The point of zero charge (pH_PZC) was observed to be 6.7 indicating favourable condition for material-anionic dye interaction. The XPS studies revealed that the large amounts of oxygen vacancies were produced due to the defects in the lattice oxygen. The MnFe₂O₄ nanoparticles mineralised 98.3 ± 0.2% of 50 mg/L CR within 30 min when tested in photocatalytic reactor under 565 nm. The particles were recoverable under the influence of an external magnet after the photocatalytic reaction and were reusable. The recovered nanoparticles showed 96% of CR degradation efficiency even after five cycles of reuse. The by-product analysis with GC-MS indicated mineralization of CR into simple alcohols and acids. The aqueous solution containing mineralised CR was nontoxic to Trigonella foenumgraecum and Vigna mungo seeds and favoured increased germination, plumule and radicle length when compared to untreated CR.

Photodeposition of Silver on Zinc/Calcium Ferrite Nanoparticles: A Contribution to Efficient Effluent Remediation and Catalyst Reutilization

The efficient photodegradation of textile dyes is still a challenge, especially considering resistant azo dyes. In this work, zinc/calcium mixed ferrite nanoparticles prepared by the sol–gel method were coupled with silver by a photodeposition method to enhance the photocatalytic potency. The obtained zinc/calcium ferrites are mainly cubic-shaped nanoparticles sized 15 ± 2 nm determined from TEM and XRD and an optical bandgap of 1.6 eV. Magnetic measurements indicate a superparamagnetic behavior with saturation magnetizations of 44.22 emu/g and 27.97 emu/g, respectively, for Zn/Ca ferrite and Zn/Ca ferrite with photodeposited silver. The zinc/calcium ferrite nanoparticles with photodeposited silver showed efficient photodegradation of the textile azo dyes C.I. Reactive Blue 250 and C.I. Reactive Yellow 145. Subsequent cycles of the use of the photocatalyst indicate the possibility of magnetic recovery and reutilization without a significant loss of efficiency.

Bioconjugate synthesis, phytochemical analysis, and optical activity of NiFe2O4 nanoparticles for the removal of ciprofloxacin and Congo red from water

In this paper, Jr.NiFe2O4 nanoparticles (NPs) were synthesized first time using the leaves extract of Juglans regia via a straightforward process. The physio and phytochemical analysis of plant confirm the presence of macromolecules which function as bio-reductant and stabilize the nanoparticles. The Jr.NiFe2O4 NPs were characterized by UV-visible, FTIR spectroscopy, PXRD pattern, SEM and TGA/DTA analysis. The nanoparticles proved to be optically active having a value of indirect bandgap of energy in the range of 1.53 eV. The Jr.NiFe2O4 NPs have the ability in scavenging 2,2-diphenyl-1-picrylhydrazyl hydrate (DPPH) free radicals and showed 58.01% ± 1.2% scavenging activity at 100 µg/mL concentrations. The photocatalytic degradation study of ciprofloxacin (CIP) and Congo red (CR) reveals that the highest degradation rate was acquired for CIP using pH = 3, at 254 nm, while 85% of removal rate was analysed for CR. The kinetic studies in case of CR removal followed pseudo-first-order model with thermodynamic parameters (∆G° = - 5.87 kJ mol-1 K, ΔH° = 1393.50 kJ mol-1 and ΔS° = 22.537 kJ mol-1 K) with error analysis. Overall, these data recommend an innovative inspiring application of a plant-mediated synthesis of Jr.NiFe2O4 NPs.

A Sensitive Visible Light Photodetector Using Cobalt-Doped Zinc Ferrite Oxide Thin Films

In this study, a highly sensitive trilayer photodetector using Co-doped ZnFe₂O₄ thin films annealed at 400 °C was synthesized successfully. Trilayer-photodetector devices with a film stack of 5 at % Co-doped-zinc-ferrite-thin-film/indium-tin-oxide on p⁺-Si substrates were fabricated by radio-frequency sputtering. The absorbance spectra, photoluminescence spectra, transmission electron microscopy images, and I-V characteristics under various conditions were comprehensively investigated. The outstanding performance of trilayer-photodector devices was measured, including a high photosensitivity of 181 and a fast photoresponse time with a rise time of 10.6 ms and fall time of 9.9 ms under 630 nm illumination. Therefore, the Co-doped ZnFe₂O₄ thin film is favorable for potential photodetector applications in visible light regions.

Simple fabrication and unprecedented visible light response of NiNb2O6/RGO heterojunctions for the degradation of emerging pollutants in water

Utilization of environmentally friendly and effective synthesis methods to fabricate visible light responsive photocatalysts with impressive catalytic performance is desirable in photocatalytic water treatment.

Growth of macroporous TiO2 on B-doped g-C3N4 nanosheets: a Z-scheme photocatalyst for H2O2 production and phenol oxidation under visible light

BCN/TiO₂ heterostructured photocatalyst was demonstrated towards H₂O₂ production and phenol oxidation under visible light, based on Z-scheme and p–n heterojunction mechanism.

Microwave-Assisted Catalytic Degradation of Brilliant Green by Spinel Zinc Ferrite Sheets

Microwave (MW)-assisted catalytic degradation, being an emerging technique, can potentially fill in the technological gap which promises on-demand, prompt, and efficient catalysis, and therefore, suitable MW catalysts are curiously being hunted. Candidature of spinel zinc ferrite (SZFO) atomic sheets as a MW catalyst has thoroughly been investigated in this article. Analytical techniques prove SZFO atomic sheets to be highly crystalline, thermally stable, good dielectric, and superparamagnetic, which render it a potentially strong MW catalyst. Brilliant green (BG) has been demonstrated to be chemisorbed on the SZFO atomic sheets, which upon MW irradiation gets mineralized within 5 min, and the overall efficiency has been observed to be >99%. Total organic carbon removal of ∼80% has been obtained. Ionic chromatography proves the formation of SO₄ ^2- and NO₃ ^- anions which increase with MW exposure time. Liquid chromatography mass spectroscopy studies have established intermediate formations during catalysis. SZFO, established as a uniquely suited and highly efficient MW catalyst for BG, is expected to broaden the horizons of MW-assisted catalytic degradation and lead it toward its broader applications.

An overview of recent progress on noble metal modified magnetic Fe3O4 for photocatalytic pollutant degradation and H2 evolution

Noble metal modified magnetic Fe₃O₄ catalysts for photocatalytic pollutant degradation and H₂ evolution are reviewed.

Enhancement of H2O2 Decomposition by the Co-catalytic Effect of WS2 on the Fenton Reaction for the Synchronous Reduction of Cr(VI) and Remediation of Phenol

The greatest problem in the Fe(II)/H₂O₂ Fenton reaction is the low production of ·OH owing to the inefficient Fe(III)/Fe(II) cycle and the low decomposition efficiency of H₂O₂ (<30%). Herein, we report a new discovery regarding the significant co-catalytic effect of WS₂ on the decomposition of H₂O₂ in a photoassisted Fe(II)/H₂O₂ Fenton system. With the help of WS₂ co-catalytic effect, the H₂O₂ decomposition efficiency can be increased from 22.9% to 60.1%, such that minimal concentrations of H₂O₂ (0.4 mmol/L) and Fe²⁺ (0.14 mmol/L) are necessary for the standard Fenton reaction. Interestingly, the co-catalytic Fenton strategy can be applied to the simultaneous oxidation of phenol (10 mg/L) and reduction of Cr(VI) (40 mg/L), and the corresponding degradation and reduction rates can reach up to 80.9% and 90.9%, respectively, which are much higher than the conventional Fenton reaction (52.0% and 31.0%). We found that the expose reductive W⁴⁺ active sites on the surface of WS₂ can greatly accelerate the rate-limiting step of Fe³⁺/Fe²⁺ conversion, which plays the key role in the decomposition of H₂O₂ and the reduction of Cr(VI). Our discovery represents a breakthrough in the field of inorganic catalyzing AOPs and greatly advances the practical utility of this method for environmental applications.

Cr(VI) remediation from aqueous environment through modified-TiO2-mediated photocatalytic reduction

Cr(VI) exhibits cytotoxic, mutagenic and carcinogenic properties; hence, effluents containing Cr(VI) from various industrial processes pose threat to aquatic life and downstream users. Various treatment techniques, such as chemical reduction, ion exchange, bacterial degradation, adsorption and photocatalysis, have been exploited for remediation of Cr(VI) from wastewater. Among these, photocatalysis has recently gained considerable attention. The applications of photocatalysis, such as water splitting, CO2 reduction, pollutant degradation, organic transformation reactions, N2 fixation, etc., towards solving the energy crisis and environmental issues are briefly discussed in the Introduction of this review. The advantages of TiO2 as a photocatalyst and the importance of its modification for photocatalytic reduction of Cr(VI) has also been addressed. In this review, the photocatalytic activity of TiO2 after modification with carbon-based advanced materials, metal oxides, metal sulfides and noble metals towards reduction of Cr(VI) was evaluated and compared with that of bare TiO2. The photoactivity of dye-sensitized TiO2 for reduction of Cr(VI) was also discussed. The mechanism for enhanced photocatalytic activity was highlighted and attributed to the resultant properties, namely, effective separation of photoinduced charge carriers, extension of the light absorption range and intensity, increase of the surface active sites, and higher photostability. Advantages and limitations for photoreduction of Cr(VI) over modified TiO2 are depicted in the Conclusion. The various challenges that restrict the technology from practical applications in remediation of Cr(VI) from wastewater were addressed in the Conclusion section as well. The future perspectives of the field presented in this review are focused on the development of whole-solar-spectrum responsive, TiO2-coupled photocatalysts which provide efficient photocatalytic reduction of Cr(VI) along with their good recoverability and recyclability.