Fusarium mycotoxins: The major food contaminants

Mycotoxins, which are secondary metabolites produced by toxicogenic fungi, are natural food toxins that cause acute and chronic adverse reactions in humans and animals. The genus Fusarium is one of three major genera of mycotoxin-producing fungi. Trichothecenes, fumonisins, and zearalenone are the major Fusarium mycotoxins that occur worldwide. Fusarium mycotoxins have the potential to infiltrate the human food chain via contamination during crop production and food processing, eventually threatening human health. The occurrence and development of Fusarium mycotoxin contamination will change with climate change, especially with variations in temperature, precipitation, and carbon dioxide concentration. To address these challenges, researchers have built a series of effective models to forecast the occurrence of Fusarium mycotoxins and provide guidance for crop production. Fusarium mycotoxins frequently exist in food products at extremely low levels, thus necessitating the development of highly sensitive and reliable detection techniques. Numerous successful detection methods have been developed to meet the requirements of various situations, and an increasing number of methods are moving toward high-throughput features. Although Fusarium mycotoxins cannot be completely eliminated, numerous agronomic, chemical, physical, and biological methods can lower Fusarium mycotoxin contamination to safe levels during the preharvest and postharvest stages. These theoretical innovations and technological advances have the potential to facilitate the development of comprehensive strategies for effectively managing Fusarium mycotoxin contamination in the future.

Centrifugation-Assisted Solid-Phase Extraction Coupled with UPLC-MS/MS for the Determination of Mycotoxins in ARECAE Semen and Its Processed Products

Mycotoxins can occur naturally in a variety of agriculture products, including cereals, feeds, and Chinese herbal medicines (TCMs), via pre- and post-harvest contamination and are regulated worldwide. However, risk mitigation by monitoring for multiple mycotoxins remains a challenge using existing methods due to their complex matrices. A multi-toxin method for 22 mycotoxins (aflatoxin B₁, B₂, G₁, G₂, M₁, M₂; ochratoxin A, B, C; Fumonisin B₁, B₂, B₃; 15-acetyldeoxynivalenol, 3-acetyldeoxynivalenol, diace-toxyscirpenol, HT-2, T-2, deepoxy-deoxynivalenol, deoxynivalenol, neosolaniol, zearalenone, and sterigmatocystin) using centrifugation-assisted solid-phase extraction (SPE) clean-up prior to ultra-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) analysis for Arecae Semen and its processed products was developed and validated. Several experimental parameters affecting the extraction and clean-up efficiency were systematically optimized. The results indicated good linearity in the range of 0.1-1000 μg/kg (r² > 0.99), low limits of detection (ranging from 0.04 μg/kg to 1.5 μg/kg), acceptable precisions, and satisfactory recoveries for the selected mycotoxins. The validated method was then applied to investigate mycotoxin contamination levels in Areca catechu and its processed products. The mycotoxins frequently contaminating Areca catechu were aflatoxins (AFs), and the average contamination level and number of co-occurring mycotoxins in the Arecae Semen slices (Binlangpian) were higher than those in commercially whole Arecae Semen and Arecae Semen Tostum (Jiaobinlang). Sterigmatocystin was detected in 5 out of 30 Arecae Semen slices. None of the investigated mycotoxins were detected in Arecae pericarpium (Dafupi). The results demonstrated that centrifugation-assisted SPE coupled with UHPLC-MS/MS can be a useful tool for the analysis of multiple mycotoxins in Areca catechu and its processed products.

Multiple Mycotoxin Contamination in Medicinal Plants Frequently Sold in the Free State Province, South Africa Detected Using UPLC-ESI-MS/MS

Medicinal plants are important in the South African traditional healthcare system, the growth in the consumption has led to increase in trade through muthi shops and street vendors. Medicinal plants are prone to contamination with fungi and their mycotoxins. The study investigated multiple mycotoxin contamination using Ultra High Pressure Liquid Chromatography-Tandem Mass Spectrometry (UPLC-ESI-MS/MS) for the simultaneous detection of Aflatoxin B1 (AFB1), Deoxynivalenol (DON), Fumonisins (FB1, FB2, FB3), Nivalenol (NIV), Ochratoxin A (OTA) and Zearalenone (ZEN) in frequently sold medicinal plants. Medicinal plant samples (n = 34) were purchased and analyzed for the presence of eight mycotoxins. DON and NIV were not detected in all samples analyzed. Ten out of thirty-four samples tested positive for mycotoxins -AFB1 (10.0%); OTA (10.0%); FB1 (30.0%); FB2 (50.0%); FB3 (20.0%); and ZEN (30.0%). Mean concentration levels ranged from AFB1 (15 µg/kg), OTA (4 µg/kg), FB1 (7-12 µg/kg), FB2 (1-18 µg/kg), FB3 (1-15 µg/kg) and ZEN (7-183 µg/kg). Multiple mycotoxin contamination was observed in 30% of the positive samples with fumonisins. The concentration of AFB1 reported in this study is above the permissible limit for AFB1 (5 µg/kg). Fumonisin concentration did not exceed the limits set for raw maize grain (4000 µg/kg of FB1 and FB2). ZEN and OTA are not regulated in South Africa. The findings indicate the prevalence of mycotoxin contamination in frequently traded medicinal plants that poses a health risk to consumers. There is therefore a need for routine monitoring of multiple mycotoxin contamination, human exposure assessments using biomarker analysis and establishment of regulations and standards.

Signal enhancing strategies in aptasensors for the detection of small molecular contaminants by nanomaterials and nucleic acid amplification

Small molecular contaminants (such as mycotoxins, antibiotics, pesticide residues, etc.) in food and environment have given rise to many biological and ecological toxicities, which has attracted worldwide attention in recent years. Meanwhile, due to the advantages of aptamers such as high specificity and stability, easy synthesis and modification, as well as low cost and immunogenicity, various aptasensors for the detection of small molecular contaminants have been flourishing. An aptasensor as a whole is composed of an aptamer-based target recognizer and a signal transducer, which are fields of concentrated research. In the practical detection applications, in order to achieve the quantitative detection of small molecular contaminants at low abundance in real samples, a large number of signal enhancing strategies have been utilized in the development of aptasensors. Recent years is a vintage period for efficient signal enhancing strategies of aptasensors by the aid of nanomaterials and nucleic acid amplification that are applied in the elements for target recognition and signal conversion. Therefore, this paper meticulously reviews the signal enhancing strategies based on nanomaterials (including the (quasi-)zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanomaterials) and nucleic acid amplification (including enzyme-assisted nucleic acid amplification and enzyme-free nucleic acid amplification). Furthermore, the challenges and future trends of the abovementioned signal enhancing strategies for application are also discussed in order to inspire the practitioners in the research and development of aptasensors for small molecular contaminants.

A facile "turn-on" fluorescent aptasensor for simultaneous detection of dual mycotoxins in traditional Chinese medicine based on graphene oxide and FRET

Mycotoxin is a common sort of harmful contaminant in traditional Chinese medicine (TCM), which is in a great demand of controlling. On this account, a facile "turn-on" fluorescent aptasensor based on fluorescence resonance energy transfer (FRET) for simultaneous detection of patulin (PAT) and zearalenone (ZEN) was developed. In this study, the aptamers of PAT and ZEN were labeled by FAM and Cy3, respectively, serving as fluorescence probes. Both aptamers could adsorb on the surface of graphene oxide (GO) via π-π stacking, which will consequently result in the occurrence of FRET between the fluorophores and GO. In the absence of the targets, the fluorescence would be quenched "off". In the presence of any of the dual mycotoxins, the corresponding aptamers would interact with the targets and release from GO due to the conformational variation, leading to a fluorescence "turn-on" effect. The limit of detection of this difunctional aptasensor was 2.29 nM for PAT and 0.037 nM for ZEN, respectively. This aptasensing platform exhibited satisfactory selectivity against interferents and reliability in real TCM sample detection. To our knowledge, it is the first aptasensor based on GO and FRET that realizes simultaneous detection of dual mycotoxin in TCM. Moreover, the measurement takes merely ∼60 min, does not need complicated pretreatment, and uses only inexpensive aptamer and GO as consuming materials. To sum up, this aptasensor exhibits great potential in fast, cost-effective and reliable simultaneous detection of multiple targets, and is expected to contribute to the quality and safety control of TCM.

Mycotoxin extraction from edible insects with natural deep eutectic solvents: a green alternative to conventional methods

Edible insects are widely consumed in Africa, Asia, Oceania and Latin America, but less commonly so in Western countries. Since the turn of the millennium, however, entomophagy has aroused growing interest worldwide in response to the increasing scarcity of food resources. In fact, edible insects can be a source of high-quality protein, and also of fat, energy, minerals and vitamins. However, the lack of regulatory guidelines for microbiologically or chemically hazardous agents potentially present in these new foods (e.g., mycotoxins) may make their consumption unsafe. In this work, we developed an environmentally friendly analytical method using natural deep eutectic solvents (NADES or natural DES) in combination with ultra-high performance liquid chromatography/tandem mass spectrometry (UHPLC-MS/MS) for the simultaneous determination of six mycotoxins of great concern owing to their toxic effects on humans and animals (namely, fumonisin B₁, fumonisin B₂, T-2 toxin, HT-2 toxin, ochratoxin A and mycophenolic acid) in insect-based food products. The target mycotoxins were co-extracted from cricket flour by using the optimum DES composition (namely, a mixture of choline chloride and urea, in a 1:2 mole ratio, containing 15% water which resulted in the highest extraction recoveries for all toxins). An experimental design method (Fractional Factorial Design (FFD) was used to examine the influence of the operational variables DES volume and water content, amount of sample, extraction time and extraction temperature on the extraction efficiency for each mycotoxin. Under optimum conditions, extraction recoveries were close to 100% except for fumonisin B₂ (70%) and T-2 toxin (50%), with relative standard deviations (RSDs) below 13% in all cases. The proposed NADES-UHPLC-MS/MS method was validated in accordance with the European Commission 2002/657/EC and 2006/401/EC decisions, and used to determine the target compounds in cricket flour, silkworm pupae powder and black cricket powder.

Aptamer-based detection of fumonisin B1: A critical review

Mycotoxin contamination is a current issue affecting several crops and processed products worldwide. Among the diverse mycotoxin group, fumonisin B1 (FB1) has become a relevant compound because of its adverse effects in the food chain. Conventional analytical methods previously proposed to quantify FB1 comprise LC-MS, HPLC-FLD and ELISA, while novel approaches integrate different sensing platforms and fluorescently labelled agents in combination with antibodies. Nevertheless, such methods could be expensive, time-consuming and require experience. Aptamers (ssDNA) are promising alternatives to overcome some of the drawbacks of conventional analytical methods, their high affinity through specific aptamer-target binding has been exploited in various designs attaining favorable limits of detection (LOD). So far, two aptamers specific to FB1 have been reported, and their modified and shortened sequences have been explored for a successful target quantification. In this critical review spanning the last eight years, we have conducted a systematic comparison based on principal component analysis of the aptamer-based techniques for FB1, compared with chromatographic, immunological and other analytical methods. We have also conducted an in-silico prediction of the folded structure of both aptamers under their reported conditions. The potential of aptasensors for the future development of highly sensitive FB1 testing methods is emphasized.

Occurrence and analysis of mycotoxins in domestic Chinese herbal medicines

For time immemorial, Chinese herbal medicines (CHMs) have been widely used in China for disease treatment and promotion of general well-being. However, in recent years, many studies have shown that mycotoxins produced by fungi could contaminate CHMs due to unfavourable pre- or post-harvest conditions, raising major concern for consumer safety. At present, there is a significant focus on developing novel mycotoxin detection methods for analysing CHMs, and numerous studies have aimed to determine which kinds of raw herbal materials are most susceptible to mycotoxin contamination. In this review, we focus on recent advances in understanding and detection of mycotoxins in domestic raw herbal materials and related products from 2000 to 2018. Aspects of mycotoxin contamination of CHMs covered in this review include common mycotoxin contaminants in CHMs, maximum mycotoxin residue limits, analytical methods for mycotoxin detection and their applications and limitations, as well as a brief discussion of the trends in ongoing research.

A Review of Current Methods for Analysis of Mycotoxins in Herbal Medicines

The presence of mycotoxins in herbal medicines is an established problem throughout the entire world. The sensitive and accurate analysis of mycotoxin in complicated matrices (e.g., herbs) typically involves challenging sample pretreatment procedures and an efficient detection instrument. However, although numerous reviews have been published regarding the occurrence of mycotoxins in herbal medicines, few of them provided a detailed summary of related analytical methods for mycotoxin determination. This review focuses on analytical techniques including sampling, extraction, cleanup, and detection for mycotoxin determination in herbal medicines established within the past ten years. Dedicated sections of this article address the significant developments in sample preparation, and highlight the importance of this procedure in the analytical technology. This review also summarizes conventional chromatographic techniques for mycotoxin qualification or quantitation, as well as recent studies regarding the development and application of screening assays such as enzyme-linked immunosorbent assays, lateral flow immunoassays, aptamer-based lateral flow assays, and cytometric bead arrays. The present work provides a good insight regarding the advanced research that has been done and closes with an indication of future demand for the emerging technologies.

Quality evaluation of Alpinia oxyphylla after Aspergillus flavus infection for storage conditions optimization

In the storage of Alpinia oxyphylla, growth of mildew (especially toxic fungi, such as Aspergillus flavus) is a potential safety risk. Few reports have investigated how A. oxyphylla storage conditions impact mold growth or how mold growth impacts the bioactive components of A. oxyphylla. In this study, sterilized A. oxyphylla samples were contaminated by artificial inoculation of A. flavus spores. The main chemical components and aflatoxin levels in the infected A. oxyphylla samples were characterized. Central composite design-response surface methodology was used to study the effects of different temperature and humidity of storage conditions on the fungal growth in A. oxyphylla and accumulation of aflatoxins. The results showed that aflatoxins levels can be minimized by storing samples at temperatures below 25 °C and with humidity less than 85%. Additionally, we found that the yield and composition of volatile oil in A. oxyphylla exhibited small changes due to mold growth. However, polysaccharide content reduced remarkably. Temperatures below 25 °C and humidity below 85% were the best storage conditions to preventing A. oxyphylla from becoming moldy. Our results provide the theoretical basis for future studies the effects of storage conditions and mold growth on the quality and safety of traditional Chinese medicines (TCMs).