Thermal stability of high concentration lysozyme across varying pH: A Fourier Transform Infrared study

Development and characterization of potential antibacterial biocomposites: Lysozyme-loaded cellulose-alginate materials

The objective of this study was to design and characterize novel biocomposites based on modified cellulose/alginate oligosaccharides loaded with hen egg lysozyme (CLm/AOS/Lyz) as a potential alternative to combat bacterial proliferation. An antimicrobial enzyme, lysozyme, was immobilized within polymeric matrices to enhance its bactericidal capacity and stability. The biocomposites synthesized at pH levels 3, 5, and 8 (CLm/AOS/Lyz3, CLm/AOS/Lyz5, and CLm/AOS/Lyz8, respectively) were analyzed using Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), and energy-dispersive X-ray spectroscopy (EDS). Results demonstrated successful lysozyme conjugation to the biocomposite without altering its secondary structure or stability. The biocomposites exhibited irregular morphologies and strong adhesion between CLm/AOS and Lyz, with CLm/AOS/Lyz5 showing the highest nitrogen composition and protein content (2086.43 ± 100.90 µg of bovine serum albumin equivalents). Antibacterial assays revealed significant log reductions in viable E. faecalis cells for CLm/AOS/Lyz3 and CLm/AOS/Lyz5 (5.72 ± 0.17 and 5.78 ± 0.24 respectively), concerning the blank (8.04 ± 0.07), even comparable to free lysozyme (5.85 ± 0.35). However, no reduction in viable cell counts was observed for Gram-negative bacteria. This work highlights the potential of lysozyme-loaded cellulose-alginate biocomposites as novel antibacterial agents for effective applications in pharmaceutical and food technology fields.

A novel virus potentially evolved from the N4-like viruses represents a unique viral family: Poorviridae

Pseudoalteromonas are widely distributed in marine extreme habitats and exhibit diverse extracellular protease activity, which is essential for marine biogeochemical cycles. However, our understanding of viruses that infect Pseudoalteromonas remains limited. This study isolated a virus infecting Pseudoalteromonas nigrifaciens from Xiaogang in Qingdao, China. vB_PunP_Y3 comprises a linear, double-strand DNA genome with a length of 48,854 bp, encoding 52 putative open reading frames. Transmission electron microscopy demonstrates the short-tailed morphology of vB_PunP_Y3. Phylogenetic and genome-content-based analysis indicate that vB_PunP_Y3 represents a novel virus family named as Poorviridae, along with three high-quality uncultivated viral genomes. Biogeographical analyses show that Poorviridae is distributed across five viral ecological zones, and is predominantly detected in the Antarctic, Arctic, and bathypelagic zones. Comparative genomics analyses identified three of the seven hallmark proteins of N4-like viruses (DNA polymerase, major capsid protein, and virion-encapsulated RNA polymerase) from vB_PunP_Y3, combing with the protein tertiary structures of the major capsid protein, suggesting that vB_PunP_Y3 might evolve from the N4-like viruses.

IMPORTANCE

vB_PunP_Y3 is a unique strain containing three of the seven hallmark proteins of N4-like viruses, but is grouped into a novel family-level viral cluster with three uncultured viruses from metagenomics, named Poorviridae. This study enhanced the understanding about the genetic diversity, evolution, and distribution of Pseudoalteromonas viruses and provided insights into the novel evolution mechanism of marine viruses.

Covalent Lysozyme Immobilization on Enzymatic Cellulose Nanocrystals

Nanostructured materials represent promising substrates for biocatalyst immobilization and activation. Cellulose nanocrystals (CNCs), accessible from waste and/or renewable sources, are sustainable and biodegradable, show high specific surface area for anchoring a high number of enzymatic units, and high thermal and mechanical stability. In this work, we present a holistic enzyme-based approach to functional antibacterial materials by bioconjugation between the lysozyme from chicken egg white and enzymatic cellulose nanocrystals. The neutral CNCs were prepared by endoglucanase hydrolysis from Avicel. We explore the covalent immobilization of lysozyme on enzymatic CNCs and on their TEMPO oxidized derivatives (TO-CNCs), comparing immobilization yields, material properties, and enzymatic activities. The materials were characterized by X-ray diffractometry (XRD), attenuated total reflectance Fourier Transform infrared spectroscopy (ATR-FTIR), bicinchoninic acid (BCA) assay, field-emission scanning electron microscopy (FE-SEM) and dynamic light scattering (DLS). We demonstrate the higher overall efficiency of the immobilization process carried out on TO-CNCs, based on the success of covalent bonding and on the stability of the isolated bioconjugates.

Sound-mediated nucleation and growth of amyloid fibrils

Mechanical energy, specifically in the form of ultrasound, can induce pressure variations and temperature fluctuations when applied to an aqueous media. These conditions can both positively and negatively affect protein complexes, consequently altering their stability, folding patterns, and self-assembling behavior. Despite much scientific progress, our current understanding of the effects of ultrasound on the self-assembly of amyloidogenic proteins remains limited. In the present study, we demonstrate that when the amplitude of the delivered ultrasonic energy is sufficiently low, it can induce refolding of specific motifs in protein monomers, which is sufficient for primary nucleation; this has been revealed by MD. These ultrasound-induced structural changes are initiated by pressure perturbations and are accelerated by a temperature factor. Furthermore, the prolonged action of low-amplitude ultrasound enables the elongation of amyloid protein nanofibrils directly from natively folded monomeric lysozyme protein, in a controlled manner, until it reaches a critical length. Using solution X-ray scattering, we determined that nanofibrillar assemblies, formed either under the action of sound or from natively fibrillated lysozyme, share identical structural characteristics. Thus, these results provide insights into the effects of ultrasound on fibrillar protein self-assembly and lay the foundation for the potential use of sound energy in protein chemistry.

Biocatalytic PEI-PSS membranes through aqueous phase separation: influence of casting solution pH and operational temperature

Biocatalytic membranes combine the separation properties of membranes and the catalytic abilities of enzymes, holding great promise for industries where both purification and conversion are required. In this work, polyelectrolyte complex membranes incorporated with lysozyme were prepared using polyethyleneimine (PEI) and poly(sodium 4-styrenesulfonate) (PSS) through a one-step and mild pH shift aqueous phase separation (APS) approach. The effects of lysozyme addition and casting solution pH on the membrane properties were studied. All the membranes, both with and without added lysozyme, exhibited asymmetric structures with relatively dense top surfaces and porous cross-sections with finger-like macrovoids. The incorporation of lysozyme did not significantly influence the structure and permeability of the formed membranes. The PEI-PSS biocatalytic membranes exhibited temperature dependent enzymatic activity. The activity strongly increased with increased operational temperature, with the highest activity of 4.30 ± 0.15 U cm-2 at 45 °C. This indicates a responsive effect, where a higher temperature leads to some swelling of the polyelectrolyte complex membrane, making the enzyme more accessible to the used substrate. Moreover, the biocatalytic membranes demonstrate desirable enzymatic stability, maintaining 60% activity even after 60 days of storage. This study validates the potential of the water-based APS process as a straightforward approach for integrating enzymes into responsive biocatalytic membranes.

Dynamic Personality of Proteins and Effect of the Molecular Environment

Protein dynamics display distinct traits that are linked to their specific biological function. However, the interplay between intrinsic dynamics and the molecular environment on protein stability remains poorly understood. In this study, we investigate, by incoherent neutron scattering, the subnanosecond time scale dynamics of three model proteins: the mesophilic lysozyme, the thermophilic thermolysin, and the intrinsically disordered β-casein. Moreover, we address the influence of water, glycerol, and glucose, which create progressively more viscous matrices around the protein surface. By comparing the protein thermal fluctuations, we find that the internal dynamics of thermolysin are less affected by the environment compared to lysozyme and β-casein. We ascribe this behavior to the protein dynamic personality, i.e., to the stiffer dynamics of the thermophilic protein that contrasts the influence of the environment. Remarkably, lysozyme and thermolysin in all molecular environments reach a critical common flexibility when approaching the calorimetric melting temperature.

Sustainable combination of ionic liquid and deep eutectic solvent for protecting and preserving of the protein structure: The synergistic interaction of enzymes and eco-friendly hybrid ionic fluids

Hybrid ionic fluids (HIFs) are one of the emerging and fascinating sustainable solvent media, a novel environment-friendly solvent for biomolecules. The HIFs have been synthesized by combining a deep eutectic solvent (DES), an ionic liquid (IL) having a common ion. The stability and activity of hen's egg white lysozyme (Lyz) in the presence of a recently designed new class of biocompatible solvents, HIFs have been explored by UV-visible, steady-state fluorescence, circular dichroism (CD), Fourier transform infrared spectroscopy (FT-IR) along with dynamic light scattering (DLS) measurements. This work emphasizes the effect of DES synthesized by using 1:2 choline chloride and glycerol [Glyn], ILs (1-butly-3-methylimidazolium chloride [BMIM]Cl and choline acetate [Chn][Ac]) and their corresponding HIFs on the structure and functionality of Lyz. Moving forward, we also studied the secondary structure, thermal stability and enzymatic activity and thermodynamic profile of Lyz at pH = 7 in the presence of varying concentrations (0.1 to 0.5) M of [BMIM]Cl, [Chn][Ac] ILs, [Glyn] DES and [Glyn][BMIM]Cl (hybrid ionic fluid1) as well as [Glyn][Chn][Ac] (hybrid ionic fluid2). Spectroscopic results elucidate that ILs affect the activity and structural stability of Lyz, whereas the stability and activity are increased by DES and are maintained by HIFs at all the studied concentrations. Overall, the experimental results studied elucidate expressly that the properties of Lyz are maintained in the presence of hybrid ionic fluid1 while these properties are intensified in hybrid ionic fluid2. This work has elucidated expressly biocompatible green solvents in protein stability and functionality due to the alluring properties of DES, which can counteract the negative effect of ILs in HIFs.

Sound-mediated nucleation and growth of amyloid fibrils

Mechanical energy, specifically in the form of ultrasound, can induce pressure variations and temperature fluctuations when applied to an aqueous media. These conditions can both positively and negatively affect protein complexes, consequently altering their stability, folding patterns, and self-assembling behavior. Despite much scientific progress, our current understanding of the effects of ultrasound on the self-assembly of amyloidogenic proteins remains limited. In the present study, we demonstrate that when the amplitude of the delivered ultrasonic energy is sufficiently low, it can induce refolding of specific motifs in protein monomers, which is sufficient for primary nucleation; this has been revealed by MD. These ultrasound-induced structural changes are initiated by pressure perturbations and are accelerated by a temperature factor. Furthermore, the prolonged action of low-amplitude ultrasound enables the elongation of amyloid protein nanofibrils directly from natively folded monomeric lysozyme protein, in a controlled manner, until it reaches a critical length. Using solution X-ray scattering, we determined that nanofibrillar assemblies, formed either under the action of sound or from natively fibrillated lysozyme, share identical structural characteristics. Thus, these results provide insights into the effects of ultrasound on fibrillar protein self-assembly and lay the foundation for the potential use of sound energy in protein chemistry.

Significance Statement

Understanding how and why proteins form amyloid fibrils is crucial for research into various diseases, including neurodegeneration. Ultrasound is routinely used in research settings as a tool for generating amyloid seeds (nucleation sites) from mature fibrils, which accelerate the rate of fibril growth. However, ultrasound can have various effects on aqueous media including temperature, extreme shear, and free radicals. Here we show that when the ultrasound parameters are precisely adjusted, they can be utilized as a tool for amyloid growth directly from the natively folded monomers. Thus, it is possible to induce minor changes in the folding of proteins, which trigger nucleation and accelerate amyloid growth. This knowledge lays the foundation for the potential use of sound in protein chemistry.

Development of a drying method for proteins based on protein-hyaluronic acid precipitation

This study aims to develop a new method to dry proteins based on protein-hyaluronic acid (HA) precipitation and apply the precipitation-redissolution technique to develop highly concentrated protein formulations. Lysozyme was used as a model protein and HA with various molecular weights (MW) were investigated. Under low ionic strength, low-MW HA (e.g., MW: around 5 K) did not induce lysozyme precipitation. Conversely, high-MW HA (e.g., MW: approximately from 40 K to 1.5 M) precipitated more than 90 % of lysozyme. The dried lysozyme-HA precipitates had moisture levels between 4 % and 5 %. The lysozyme-HA precipitates could be redissolved using PBS (pH 7.4, ionic strength: ∼ 163 mM). The viscosity of the reconstituted solution was dependent on HA MW, e.g., 4 cP for HA40K, and 155 cP for HA1.5 M, suggesting low-MW HA might be a proper excipient for highly concentrated solution formulations for subcutaneous/intraocular injection and high-MW HA may fit for other applications. The tertiary structure of lysozyme after the precipitation-redissolution steps had no significant difference from that of the original lysozyme as confirmed by fluorescence spectroscopy. The denaturation temperature of lysozyme after the precipitation-redissolution steps and that of the original lysozyme were close, indicating they possessed similar thermal stability. The accelerated stability study revealed that lysozyme stored in the dry precipitates was more physically stable than that in the buffer solution. Overall, this new drying technique is suitable for drying proteins and exhibits several benefits such as minimum energy consumption, cost effectiveness, high production yield, and mild processing conditions. In addition, the precipitation-redissolution technique proposed in this study can potentially be used to develop highly concentrated formulations, especially for proteins experiencing poor stability in the liquid state.

Antimicrobial Properties of Colostrum and Milk

The growing number of antibiotic resistance genes is putting a strain on the ecosystem and harming human health. In addition, consumers have developed a cautious attitude towards chemical preservatives. Colostrum and milk are excellent sources of antibacterial components that help to strengthen the immunity of the offspring and accelerate the maturation of the immune system. It is possible to study these important defenses of milk and colostrum, such as lactoferrin, lysozyme, immunoglobulins, oligosaccharides, etc., as biotherapeutic agents for the prevention and treatment of numerous infections caused by microbes. Each of these components has different mechanisms and interactions in various places. The compound's mechanisms of action determine where the antibacterial activity appears. The activation of the antibacterial activity of milk and colostrum compounds can start in the infant's mouth during lactation and continue in the gastrointestinal regions. These antibacterial properties possess potential for therapeutic uses. In order to discover new perspectives and methods for the treatment of bacterial infections, additional investigations of the mechanisms of action and potential complexes are required.

pH-dependent interactions of biologically important metal ions with hen egg white lysozyme based on its hydration properties: Thermodynamic and mechanistic insights

Importance of metal ion selectivity in biomolecules and their key role in proteins are widely explored. However, understanding the thermodynamics of how hydrated metal ions alter the protein hydration and their conformation is also important. In this study, the interaction of some biologically important Ca2+, Mn2+, Co2+, Cu2+, and Zn2+ ions with hen egg white lysozyme at pH 2.1, 3.0, 4.5 and 7.4 has been investigated. Intrinsic fluorescence studies have been employed for metal ion-induced protein conformational changes analysis. Thermostability based on protein hydration has been investigated using differential scanning calorimetry (DSC). Thermodynamic parameters emphasizing on metal ion-protein binding mechanistic insights have been well discussed using isothermal titration calorimetry (ITC). Overall, these experiments have reported that their interactions are pH-dependent and entropically driven. This research also reports the strongly hydrated metal ions as water structure breaker unlike osmolytes based on DSC studies. These experimental results have highlighted higher concentrations of different metal ions effect on the protein hydration and thermostability which might be helpful in understanding their interactions in aqueous solutions.

Unveiling protein-protein interaction potential through Monte Carlo simulation combined with small-angle X-ray scattering

Protein interactions are investigated under different conditions of lysozyme concentration, temperature and ionic strength by means of in-solution small angle X-Ray scattering (SAXS) experiments and Monte Carlo (MC) simulations. Initially, experimental data were analysed through a Hard-Sphere Double Yukawa (HSDY) model combined with Random Phase Approximation (RPA), a closure relationship commonly used in the literature for monodisperse systems. We realized by means of MC that the HSDY/RPA modelling fails to describe the protein-protein pair potential for moderated and dense systems at low ionic strength, mainly due to inherent distortions of the RPA approximation. Our SAXS/MC results thus show that lysozyme concentrations between 2 (diluted) and 20 mg/mL (not crowded) present similar protein-protein pair potential preserving the values of surface net charge around 7 e, protein diameter of 28 Å, decay range of attractive well potential of 3 Å and a depth of the well potential varying from 1 to 5 kBT depending on temperature and salt addition. Noteworthy, we here propose a novel method to analyse the SAXS data from interacting proteins through MC simulations, which overcomes the deficiencies presented by the use of a closure relationship. Furthermore, this new methodology of combining SAXS with MC simulations gives a step forward to investigate more complex systems as those composed of a mixture of proteins of distinct species presenting different molecular weights (and hence sizes) and surface net charges at low, moderate and very dense systems.

The Study of the Cytotoxicity, Proliferative and Microbiological Activity of the Medicated Chewing Gum with Ascorbic Acid and Lysozyme Hydrochloride Using Different Culture of Cells

Medicated chewing gum with lysozyme hydrochloride and ascorbic acid as active pharmaceutical ingredients was developed for application in dentistry. The aim of this research was to study the cytotoxicity, proliferative, and microbiological activities of the active ingredients in different types of cell cultures. The preclinical study of active pharmaceutical ingredients and their combinations was carried out using culture lines such as HepG2 (human hepatocarcinoma cells), Hek293 (human embryonic kidney cells), and MAEC (mouse aortic endothelial cells). MTT assays were used to analyse cytotoxicity and proliferative activity, while the state of antioxidant protection was assessed by the content of sulfhydryl groups and catalase activity. The determination of lipid peroxidation products was based on the level of TBA-active products. As a microbiological model for studying the effect of the developed dental medicine on the ability of the oral cavity microorganisms to form biofilms, the following strains were used: Streptococcus mutans, Staphylococcus aureus, Staphylococcus epidermidis, Lactobacillus plantarum, and Candida albicans. The optical density of the formed biofilm was evaluated by the intensity of the experimental sample's colour on a StatFax 303 Plus photometer at a wavelength of 630 nm. The combination of ascorbic acid and lysozyme hydrochloride in the established concentrations (20 mg and 10 mg per 1 gum, respectively) resulted in a slight stimulation of cell proliferation without any toxic effects and increased antioxidant protection, preventing the development of oxidative stress. It was found that, in contrast to the separately used active substances, the combination of lysozyme hydrochloride and ascorbic acid inhibits the biofilm formation of all studied microorganisms and shows the ability to destroy diurnal biofilms of L. plantarum and fungi of the genus Candida, indicating potentiation and summation of the active pharmaceutical ingredients' composition effects in the developed dental medicine. Due to the observed positive pharmacological and microbiological action, the combination of lysozyme hydrochloride and ascorbic acid in the medicated chewing gum serves as a promising tool for the prevention and treatment of infectious and inflammatory diseases of the periodontium and mucous membranes and the prevention of caries.

Differential fibril morphologies and thermostability determine functional roles of Staphylococcus aureus PSMα1 and PSMα3

Phenol-soluble modulins (PSMs) are virulent peptides secreted by staphylococci that undergo self-assembly into amyloid fibrils. This study focuses on Staphylococcus aureus PSMα1 and PSMα3, which share homologous sequences but exhibit distinct amyloid fibril structures. Upon subjecting PSMα1 to an 80°C heat shock, it fibrillates into cross-β structures, resulting in the loss of cytotoxic activity. Conversely, PSMα3 cross-α fibrils undergo reversible disaggregation upon heat shock, leading to the recovery of cytotoxicity. The differential thermostability probably arises from the presence of hydrogen bonds along the β-strands within the β-sheets of the cross-β fibrils. We propose that the breakdown of PSMα3 fibrils into soluble species, potentially co-aggregating with membrane lipids, is crucial for its toxic process and enables the reversible modulation of its biological activity under stress conditions. In contrast, the formation of robust and irreversible cross-β fibrils by PSMα1 corresponds to its role in biofilm stability. These findings emphasize how the unique fibril morphologies and thermostability of PSMα1 and PSMα3 shape their functional roles in various environments of S. aureus.

Nanocrystallites Modulate Intermolecular Interactions in Cryoprotected Protein Solutions

Studying protein interactions at low temperatures has important implications for optimizing cryostorage processes of biological tissue, food, and protein-based drugs. One of the major issues is related to the formation of ice nanocrystals, which can occur even in the presence of cryoprotectants and can lead to protein denaturation. The presence of ice nanocrystals in protein solutions poses several challenges since, contrary to microscopic ice crystals, they can be difficult to resolve and can complicate the interpretation of experimental data. Here, using a combination of small- and wide-angle X-ray scattering (SAXS and WAXS), we investigate the structural evolution of concentrated lysozyme solutions in a cryoprotected glycerol-water mixture from room temperature (T = 300 K) down to cryogenic temperatures (T = 195 K). Upon cooling, we observe a transition near the melting temperature of the solution (T ≈ 245 K), which manifests both in the temperature dependence of the scattering intensity peak position reflecting protein-protein length scales (SAXS) and the interatomic distances within the solvent (WAXS). Upon thermal cycling, a hysteresis is observed in the scattering intensity, which is attributed to the formation of nanocrystallites in the order of 10 nm. The experimental data are well described by the two-Yukawa model, which indicates temperature-dependent changes in the short-range attraction of the protein-protein interaction potential. Our results demonstrate that the nanocrystal growth yields effectively stronger protein-protein attraction and influences the protein pair distribution function beyond the first coordination shell.

Entropic repulsion of cholesterol-containing layers counteracts bioadhesion

Control of adhesion is a striking feature of living matter that is of particular interest regarding technological translation^1-3. We discovered that entropic repulsion caused by interfacial orientational fluctuations of cholesterol layers restricts protein adsorption and bacterial adhesion. Moreover, we found that intrinsically adhesive wax ester layers become similarly antibioadhesive when containing small quantities (under 10 wt%) of cholesterol. Wetting, adsorption and adhesion experiments, as well as atomistic simulations, showed that repulsive characteristics depend on the specific molecular structure of cholesterol that encodes a finely balanced fluctuating reorientation at the interface of unconstrained supramolecular assemblies: layers of cholesterol analogues differing only in minute molecular variations showed markedly different interfacial mobility and no antiadhesive effects. Also, orientationally fixed cholesterol layers did not resist bioadhesion. Our insights provide a conceptually new physicochemical perspective on biointerfaces and may guide future material design in regulation of adhesion.

Interaction of Hyaluronan Acid with Some Proteins in Aqueous Solution as Studied by NMR

According to actual literature data, hyaluronic acid (HA) that is presented in the extracellular matrix can interact with proteins and thereby affect several important functions of the cell membrane. The purpose of this work was to reveal the features of the interaction of HA with proteins using the PFG NMR method by sampling two systems: aqueous solutions of HA with bovine serum albumin (BSA) and aqueous solutions of HA with hen egg-white lysozyme (HEWL). It was found that the presence of BSA in the HA aqueous solution initiates a certain additional mechanism; as a result, the population of HA molecules in the gel structure increases to almost 100%. At the same time, for an aqueous solution of HA/HEWL, even in the range of low (0.01-0.2%) HEWL contents, strong signs of degradation (depolymerization) of some HA macromolecules were observed such that they lost the ability to form a gel. Moreover, lysozyme molecules form a strong complex with degraded HA molecules and lose their enzymatic function. Thus, the presence of HA molecules in the intercellular matrix, as well as in the state associated with the surface of the cell membrane, can, in addition to the known ones, perform one more important function: the function of protecting the cell membrane from the destructive action of lysozymes. The obtained results are important for understanding the mechanism and features of the interaction of extracellular matrix glycosaminoglycan with cell membrane proteins.

Tear nanoDSF Denaturation Profile Is Predictive of Glaucoma

Primary open-angle glaucoma (POAG) is a frequent blindness-causing neurodegenerative disorder characterized by optic nerve and retinal ganglion cell damage most commonly due to a chronic increase in intraocular pressure. The preservation of visual function in patients critically depends on the timeliness of detection and treatment of the disease, which is challenging due to its asymptomatic course at early stages and lack of objective diagnostic approaches. Recent studies revealed that the pathophysiology of glaucoma includes complex metabolomic and proteomic alterations in the eye liquids, including tear fluid (TF). Although TF can be collected by a non-invasive procedure and may serve as a source of the appropriate biomarkers, its multi-omics analysis is technically sophisticated and unsuitable for clinical practice. In this study, we tested a novel concept of glaucoma diagnostics based on the rapid high-performance analysis of the TF proteome by differential scanning fluorimetry (nanoDSF). An examination of the thermal denaturation of TF proteins in a cohort of 311 ophthalmic patients revealed typical profiles, with two peaks exhibiting characteristic shifts in POAG. Clustering of the profiles according to peaks maxima allowed us to identify glaucoma in 70% of cases, while the employment of artificial intelligence (machine learning) algorithms reduced the amount of false-positive diagnoses to 13.5%. The POAG-associated alterations in the core TF proteins included an increase in the concentration of serum albumin, accompanied by a decrease in lysozyme C, lipocalin-1, and lactotransferrin contents. Unexpectedly, these changes were not the only factor affecting the observed denaturation profile shifts, which considerably depended on the presence of low-molecular-weight ligands of tear proteins, such as fatty acids and iron. Overall, we recognized the TF denaturation profile as a novel biomarker of glaucoma, which integrates proteomic, lipidomic, and metallomic alterations in tears, and monitoring of which could be adapted for rapid non-invasive screening of the disease in a clinical setting.

Sub-nL thin-film differential scanning calorimetry chip for rapid thermal analysis of liquid samples

Differential scanning calorimetry (DSC) is a popular thermal analysis technique. The miniaturization of DSC on chip as thin-film DSC (tfDSC) has been pioneered for the analysis of ultrathin polymer films at temperature scan rates and sensitivities far superior to those attainable with DSC instruments. The adoption of tfDSC chips for the analysis of liquid samples is, however, confronted with various issues including sample evaporation due to the lack of sealed enclosures. Although the subsequent integration of enclosures has been demonstrated in various designs, rarely did those designs exceed the scan rates of DSC instruments mainly because of their bulky features and requirement for exterior heating. Here, we present a tfDSC chip featuring sub-nL thin-film enclosures integrated with resistance temperature detectors (RTDs) and heaters. The chip attains an unprecedented sensitivity of 11 V W-1 and a rapid time constant of 600 ms owing to its low-addenda design and residual heat conduction (∼6 μW K-1). We present results on the phase transition of common liquid crystals which we leverage to calibrate the RTDs and characterize the thermal lag with scan rates up to 900 °C min-1. We then present results on the heat denaturation of lysozyme at various pH values, concentrations, and scan rates. The chip can provide excess heat capacity peaks and enthalpy change steps without much alteration induced by the thermal lag at elevated scan rates up to 100 °C min-1, which is an order of magnitude faster than those of many chip counterparts.

Spectro-kinetic investigations on the release mechanism of lysozyme from layer-by-layer reservoirs

The investigations of protein adsorption and release on interfaces aid in the elucidation of the protein-surface interaction mechanism, which has several applications in the biomedical area. The spectro-kinetic and morphological analysis of the release of lysozyme (Lyz) from chitosan/polystyrene sulphonate (CHI/PSS) multilayer immobilized at pHs 10.6, 8.8 and 5.0 shows that the extent of release strongly depends on the pH of Lyz loading and the ionic strength of the desorbing solution. When compared to pH 8.8, the release for pH 10.6 achieves equilibrium more rapidly. At loading pH 10.6, the release is surface-mediated, at pH 8.8, it is both surface- and bulk-mediated, while at pH 5.0 it is bulk mediated with minimal release. Lyz released for loading pH 10.6 retains its native secondary structure. Kinetic fitting suggests that high loading pH 8.8-10.6 and high release ionic strength (0.5-1.0 M NaCl) lead to burst release of Lyz from CHI/PSS multilayer. Surface morphology changes of multilayer interface upon Lyz loading and release are highlighted by SEM topography and AFM height distribution analysis. The present work indicates that CHI/PSS multilayer system can function as a reservoir for burst as well as controlled release of lysozyme by selecting the loading pH and ionic strength.

Penicillin Binding Protein 7/8 Is a Potential Drug Target in Carbapenem-Resistant Acinetobacter baumannii

Limited therapeutic options dictate the need for new classes of antimicrobials active against carbapenem-resistant Acinetobacter baumannii. Presented data confirm and extend penicillin binding protein 7/8 (PBP 7/8) as a high-value target in the CR A. baumannii strain HUMC1. PBP 7/8 was essential for optimal growth/survival of HUMC1 in ex vivo human ascites and in a rat subcutaneous abscess model; in a mouse pneumonia model, the absence of PBP 7/8 decreased lethality 11-fold. The loss of PBP 7/8 resulted in increased permeability, sensitivity to complement, and lysozyme-mediated bactericidal activity. These changes did not appear to be due to alterations in the cellular fatty acid composition or capsule production. However, a decrease in lipid A and an increase in coccoidal cells and cell aggregation were noted. The compromise of the stringent permeability barrier in the PBP 7/8 mutant was reflected by an increased susceptibility to several antimicrobials. Importantly, expression of ampC was not significantly affected by the loss of PBP 7/8 and serial passage of the mutant strain in human ascites over 7 days did not yield revertants possessing a wild-type phenotype. In summary, these data and other features support PBP 7/8 as a high-value drug target for extensively drug-resistant and CR A. baumannii. Our results guide next-stage studies; the determination that the inactivation of PBP 7/8 results in an increased sensitivity to lysozyme enables the design of a high-throughput screening assay to identify small molecule compounds that can specifically inhibit PBP 7/8 activity.

Quantitative analysis of biomolecule release from polystyrene-block-polyethylene oxide thin films

Block copolymers have garnered recent attention due to their ability to contain molecular cargo within nanoscale domains and release said cargo in aqueous environments. However, the release kinetics of cargo from these thin-films has not yet been reported. Knowledge of the release quantities and release profiles of these systems is paramount for applications of these systems. Here, Polystyrene-block-poly(ethylene oxide) (PS-b-PEO) was co-assembled with fluorescein isothiocyanate isomer I-lysozyme (FITC-LZ) and fluorescein isothiocyanate isomer I-TAT (FITC-TAT), such that these molecular cargos arrange within the PEO domains of the thin films. We show that high loading ratios of cargo/PS-b-PEO do not significantly impact the nanostructure of the films; however, a loading limit appears to be present with aggregates of protein forming at the microscale with higher loading ratios. The presence of lysozyme (LZ) within the films was confirmed qualitatively after aqueous exposure through photo-induced force microscopy (PiFM) imaging at the Amide I characteristic peak (∼1650 cm^-1). Furthermore, we demonstrate that LZ maintains activity and structure after exposure to the polymer solvent (benzene/methanol/water mix). Finally, we demonstrate quantitatively 20-80 ng cm^-2 of cargo is released from these films, depending on the cargo incorporated. We show that the larger molecule lysozyme is released over a longer time than the smaller TAT peptide. Finally, we demonstrate the ability to tune the quantity of cargo released by altering the thickness of the PS-b-PEO thin-films during fabrication.

Molecular recognition of enzymes and modulation of enzymatic activity by nanoparticle conformational sensors

Regulation of enzyme activity is key to dynamic processes in biology but is difficult to achieve with synthetic systems. We here report molecularly imprinted nanoparticles with strong binding for the N- and C-terminal peptides on lysozyme. Binding affinity for the enzyme correlated with conformational flexibility of the peptides in the protein structure. Significantly, binding at the C-terminus of lysozyme enhanced the performance of the enzyme at elevated temperatures and that at the N-terminus lowered the enzyme activity. These nanoparticles, when clicked onto magnetic nanoparticles, could also be used to fish out the protein of interest from a mixture in a single step.

Precipitant-Free Crystallization of Lysozyme and Glucose Isomerase by Drying

Protein crystallization is usually conducted by using precipitants, although the “salting-out” phenomenon is still unclear and complex. Moreover, the addition of precipitants sometimes results in irreversible disordered precipitation of protein molecules. Although precipitant-free lysozyme crystals obtained by centrifugal concentration showed significant changes in three-dimensional structure compared to the structure of salted-out crystals, it was rather difficult to mount crystals from a viscous dense liquid phase after centrifugal concentration, and the quality of the crystals often deteriorated during the mounting process. Here we present novel precipitant-free crystallization methods, which were effective for lysozyme and glucose isomerase. Tetragonal lysozyme crystals were successfully crystallized in a glass capillary simply by drying highly concentrated lysozyme solution in the presence of 0.01 M hydrochloric acid without using any precipitants. Glucose isomerase dissolved in ultra-pure water was also successfully crystallized in hanging drops by drying highly concentrated solution under low-humidity conditions. Oscillation images of the obtained crystals were safely collected without handling; they clearly indicated the crystals had a tetragonal form for lysozyme and an orthorhombic form for glucose isomerase, and their lattice parameters are similar to those of previously reported crystals obtained by salting-out methods.

Adsorption of lysozyme into a charged confining pore

Several applications arise from the confinement of proteins on surfaces because their stability and biological activity are enhanced. It is also known that the way in which a protein adsorbs on the surface is important for its biological function since its active sites should not be obstructed. In this study, the adsorption properties of hen egg-white lysozyme, HEWL, into a negatively charged silica pore is examined by employing a coarse-grained model and constant-pH Monte Carlo simulations. The role of electrostatic interactions is taken into account via including the Debye-Hückel potentials into the Cα structure-based model. We evaluate the effects of pH, salt concentration, and pore radius on the protein preferential orientation and spatial distribution of its residues regarding the pore surface. By mapping the residues that stay closer to the pore surface, we find that the increase of pH leads to orientational changes of the adsorbed protein when the solution pH gets closer to the HEWL isoelectric point. Under these conditions, the pK_a shift of these important residues caused by the adsorption into the charged confining surface results in a HEWL charge distribution that stabilizes the adsorption in the observed protein orientation. We compare our observations to the results of the pK_a shift for HEWL available in the literature and to some experimental data.

Conformational Consequences for Compatible Osmolytes on Thermal Denaturation

Compatible osmolytes are a broad class of small organic molecules employed by living systems to combat environmental stress by enhancing the native protein structure. The molecular features that make for a superior biopreservation remain elusive. Through the use of time-resolved and steady-state spectroscopic techniques, in combination with molecular simulation, insight into what makes one molecule a more effective compatible osmolyte can be gained. Disaccharides differing only in their glycosidic bonds can exhibit different degrees of stabilization against thermal denaturation. The degree to which each sugar is preferentially excluded may explain these differences. The present work examines the biopreservation and hydration of trehalose, maltose, and gentiobiose.

UV Resonance Raman explores protein structural modification upon fibrillation and ligand interaction

Amyloids are proteinaceous deposits considered an underlying pathological hallmark of several degenerative diseases. The mechanism of amyloid formation and its inhibition still represent challenging issues, especially when protein structure cannot be investigated by classical biophysical techniques as for the intrinsically disordered proteins (IDPs). In this view, the need to find an alternative way for providing molecular and structural information regarding IDPs prompted us to set a novel, to our knowledge, approach focused on UV Resonance Raman (UVRR) spectroscopy. To test its applicability, we study the fibrillation of hen-egg white lysozyme (HEWL) and insulin as well as their interaction with resveratrol, employing also intrinsic fluorescence spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and atomic force microscopy (AFM). The increasing of the β-sheet structure content at the end of protein fibrillation probed by FTIR occurs simultaneously with a major solvent exposure of tryptophan (Trp) and tyrosine (Tyr) residues of HEWL and insulin, respectively, as revealed by UVRR and intrinsic fluorescence spectroscopy. However, because the latter technique is successfully used when proteins naturally contain Trp residues, it shows poor performances in the case of insulin, and the information regarding its tertiary structure is exclusively provided by UVRR spectroscopy. The presence of an increased concentration of resveratrol induces mild changes in the secondary structure of both protein fibrils while remodeling HEWL fibril length and promoting the formation of amorphous aggregates in the case of insulin. Although the intrinsic fluorescence spectra of proteins are hidden by resveratrol signal, UVRR Trp and Tyr bands are resonantly enhanced, showing a good sensitivity to the presence of resveratrol and marking a modification in the noncovalent interactions in which they are involved. Our findings demonstrate that UVRR is successfully employed in the study of aggregation-prone proteins and of their interaction with ligands, especially in the case of Trp-lacking proteins.

Polyethylene Glycol Crowder's Effect on Enzyme Aggregation, Thermal Stability, and Residual Catalytic Activity

Protein stability and performance in various natural and artificial systems incorporating many other macromolecules for therapeutic, diagnostic, sensor, and biotechnological applications attract increasing interest with the expansion of these technologies. Here we address the catalytic activity of lysozyme protein (LYZ) in the presence of a polyethylene glycol (PEG) crowder in a broad range of concentrations and temperatures in aqueous solutions of two different molecular mass PEG samples (M_w = 3350 and 10000 g/mol). The phase behavior of PEG-protein solutions is examined by using dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS), while the enzyme denaturing is monitored by using an activity assay (AS) and circular dichroism (CD) spectroscopy. Molecular dynamic (MD) simulations are used to illustrate the effect of PEG concentration on protein stability at high temperatures. The results demonstrate that LYZ residual activity after 1 h incubation at 80 °C is improved from 15% up to 55% with the addition of PEG. The improvement is attributed to two underlying mechanisms. (i) Primarily, the stabilizing effect is due to the suppression of the enzyme aggregation because of the stronger PEG-protein interactions caused by the increased hydrophobicity of PEG and lysozyme at elevated temperatures. (ii) The MD simulations showed that the addition of PEG to some degree stabilizes the secondary structures of the enzyme by delaying unfolding at elevated temperatures. The more pronounced effect is observed with an increase in PEG concentration. This trend is consistent with CD and AS experimental results, where the thermal stability is strengthened with increasing of PEG concentration and molecular mass. The results show that the highest stabilizing effect is approached at the critical overlap concentration of PEG.

Minoxidil-Coated Lysozyme-Shelled Microbubbes Combined With Ultrasound for the Enhancement of Hair Follicle Growth: Efficacy In Vitro and In Vivo

Lysozyme (Lyz) is an antimicrobial peptide, a safe adjunct, and it has been indicated that Lyz can promote vibrissae follicle growth by enhancing the hair-inductive capacity of dermal papilla cells in mice. The present study produced a new type of minoxidil (Mx)-coated antifungal Lyz-shelled microbubble (LyzMB) for inhibiting bacteria and allergies on the oily scalp. The potential of Mx-coated LyzMBs (Mx-LyzMBs) combined with ultrasound (US) and the role of LyzMB fragments in enhancing hair follicle growth were investigated. Mx grafted with LyzMBs were synthesized and the loading efficiency of Mx on cationic LyzMBs was 20.3%. The biological activity of Lyz in skin was determined using an activity assay kit and immunohistochemistry expression, and the activities in the US+Mx-LyzMBs group were 65.8 and 118.5 μU/mL at 6 and 18 h, respectively. In hair follicle cell culture experiments, the lengths of hair follicle cells were significantly enhanced in the US+Mx-LyzMBs group (108.2 ± 11.6 μm) compared to in the US+LyzMBs+Mx group (44.3 ± 9.8 μm) and the group with Mx alone (79.6 ± 12.0 μm) on day 2 (p < 0.001). During 21 days of treatment in animal experiments, the growth rates at days 10 and 14 in the US+Mx-LyzMBs group increased by 19.4 and 65.7%, respectively, and there were significant differences (p < 0.05) between the US+Mx-LyzMBs group and the other four groups. These findings indicate that 1-MHz US (applied at 3 W/cm², acoustic pressure = 0.266 MPa) for 1 min combined with Mx-LyzMBs can significantly increase more penetration of Mx and LyzMB fragments into skin and enhance hair growth than Mx alone.

Design of oriented mesoporous silica films for guiding protein adsorption states

The highly-oriented cylindrical mesoporous silica films were synthesized on the rubbing-treated polyimide by adjusting the molar ratio of the orientation-directing agent (Brij56) to the structure-directing agent (P123) as surfactants in the silica precursor solutions for guiding protein adsorption states. As a result, the diameter and the orientation degree of mesopores changed with the molar ratio of Brij56 to P123. The maximum orientation degree (93%) of cylindrical mesopores oriented in the direction perpendicular to the rubbing direction was observed when the molar ratio of Brij56 to P123 was 3. Then, the dissolution features in simulated body fluid and the protein adsorption properties of the oriented cylindrical mesoporous silica films were investigated. The silica skeletons were gradually dissolved from the upper film surfaces and subsequently, the mesopore structures were collapsed when the films were immersed for 90 min. Moreover, the protein adsorption amount and the ratio from the mono-component and two-component solutions on the films were higher than those on the unoriented cylindrical mesoporous silica films due to the formation of open-ended cylindrical mesopore shapes and sizes. In addition, the shapes of the proteins adsorbed on the films had anisotropy, which would be reflected by the cylindrical mesopore shapes generated by the dissolution of silica layers and subsequent exposure of inner mesopore surfaces. Therefore, the synthesized highly-oriented cylindrical mesoporous silica films were useful to adsorb mesoscale biomolecules such as proteins and can effectively guide their anisotropic adsorption shapes, and therefore have the potential to be used as surface-coating films of polyimide in biomedical fields.

Structural characterization and developability assessment of sustained release hydrogels for rapid implementation during preclinical studies

Sustained-release formulations are important tools to convert efficacious molecules into therapeutic products. Hydrogels enable the rapid assessment of sustained-release strategies, which are important during preclinical development where drug quantities are limited and fast turnaround times are the norm. Most research in hydrogel-based drug delivery has focused around synthesizing new materials and polymers, with limited focus on structural characterization, technology developability and implementation. Two commercially available thermosensitive hydrogel systems, comprised of block copolymers of poly(lactic-co-glycolic acid)-b-poly(ethylene glycol)-b-poly(lactic-co-glycolic acid) (PLGA) and poly(lactide-co-caprolactone)-b-poly(ethyleneglycol)-b-poly(lactide-co-caprolactone) (PLCL), were evaluated during this study. The two block copolymers described in the study were successfully formulated to form hydrogels which delayed the release of lysozyme (> 20 days) in vitro. Characterization of formulation attributes of the hydrogels like T_sol-gel temperature, complex viscosity and injection force showed that these systems are amenable to rapid implementation in preclinical studies. Understanding the structure of the gel network is critical to determine the factors controlling the release of therapeutics out of these gels. The structures were characterized via the gel mesh sizes, which were estimated using two orthogonal techniques: small angle X-ray scattering (SAXS) and rheology. The mesh sizes of these hydrogels were larger than the hydrodynamic radius (size) of lysozyme (drug), indicating that release through these gels is expected to be diffusive at all time scales rather than sub-diffusive. In vitro drug release experiments confirm that diffusion is the dominating mechanism for lysozyme release; with no contribution from degradation, erosion, relaxation, swelling of the polymer network or drug-polymer interactions. PLGA hydrogel was found to have a much higher complex viscosity than PLCL hydrogel, which correlates with the slower diffusivity and release of lysozyme seen from the PLGA hydrogel as compared to PLCL hydrogel. This is due to the increased frictional drag experienced by the lysozyme molecule in the PLGA hydrogel network, as described by the hydrodynamic theory.

Amyloid Self-Assembly of Lysozyme in Self-Crowded Conditions: The Formation of a Protein Oligomer Hydrogel

A method is designed to quickly form protein hydrogels, based on the self-assembly of highly concentrated lysozyme solutions in acidic conditions. Their properties can be easily modulated by selecting the curing temperature. Molecular insights on the gelation pathway, derived by in situ FTIR spectroscopy, are related to calorimetric and rheological results, providing a consistent picture on structure–property correlations. In these self-crowded samples, the thermal unfolding induces the rapid formation of amyloid aggregates, leading to temperature-dependent quasi-stationary levels of antiparallel cross β-sheet links, attributed to kinetically trapped oligomers. Upon subsequent cooling, thermoreversible hydrogels develop by the formation of interoligomer contacts. Through heating/cooling cycles, the starting solutions can be largely recovered back, due to oligomer-to-monomer dissociation and refolding. Overall, transparent protein hydrogels can be easily formed in self-crowding conditions and their properties explained, considering the formation of interconnected amyloid oligomers. This type of biomaterial might be relevant in different fields, along with analogous systems of a fibrillar nature more commonly considered.

Influence of Salts on the Adsorption of Lysozyme on a Mixed-Mode Resin

Mixed-mode chromatography (MMC), which combines features of ion exchange chromatography (IEC) and hydrophobic interaction chromatography (HIC), is an interesting method for protein separation and purification. The design of MMC processes is challenging as adsorption equilibria are influenced by many parameters, including ionic strength and the presence of different salts in solution. Systematic studies on the influence of those parameters in MMC are rare. Therefore, in the present work, the influence of four salts, namely, sodium chloride, sodium sulfate, ammonium chloride, and ammonium sulfate, on the adsorption of lysozyme on the mixed-mode resin Toyopearl MX-Trp-650M at pH 7.0 and 25°C was studied systematically in equilibrium adsorption experiments for ionic strengths between 0 mM and 3000 mM. For all salts, a noticeable adsorption strength was observed over the entire range of studied ionic strengths. An exponential decay of the loading of the resin with increasing ionic strength was found until approx. 1000 mM. For higher ionic strengths, the loading was found to be practically independent of the ionic strength. At constant ionic strength, the highest lysozyme loadings were observed for ammonium sulfate, the lowest for sodium chloride. A mathematical model was developed that correctly describes the influence of the ionic strength as well as the influence of the studied salts. The model is the first that enables the prediction of adsorption isotherms of proteins on mixed-mode resins in a wide range of technically interesting conditions, accounting for the influence of the ionic strength and four salts of practical relevance.

Temperature dependent aggregation mechanism and pathway of lysozyme: By all atom and coarse grained molecular dynamics simulation

Aggregation of protein causes various diseases including Alzheimer's disease, Parkinson's disease, and type II diabetes. It was found that aggregation of protein depends on many factors like temperature, pH, salt type, salt concentration, ionic strength, protein concentration, co solutes. Here we have tried to capture the aggregation mechanism and pathway of hen egg white lysozyme using molecular dynamics simulations at two different temperatures; 300 K and 340 K. Along with the all atom simulations to get the atomistic details of aggregation mechanism, we have used coarse grained simulation with MARTINI force field to monitor the aggregation for longer duration. Our results suggest that due to the aggregation, changes in the conformation of lysozyme are more at 340 K than at 300 K. The change in the conformation of the lysozyme at 300 K is mainly due to aggregation where at 340 K change in conformation of lysozyme is due to both aggregation and temperature. Also, a more compact aggregated system is formed at 340 K.

Quantitating denaturation by formic acid: imperfect repeats are essential to the stability of the functional amyloid protein FapC

Bacterial functional amyloids are evolutionarily optimized to aggregate, so much so that the extreme robustness of functional amyloid makes it very difficult to examine their structure-function relationships in a detailed manner. Previous work has shown that functional amyloids are resistant to conventional chemical denaturants, but they dissolve in formic acid (FA) at high concentrations. However, systematic investigation requires a quantitative analysis of FA's ability to denature proteins. Amyloid formed by Pseudomonas sp. protein FapC provides an excellent model to investigate FA denaturation. It contains three imperfect repeats, and stepwise removal of these repeats slows fibrillation and increases fragmentation during aggregation. However, the link to stability is unclear. We first calibrated FA denaturation using three small, globular, and acid-resistant proteins. This revealed a linear relationship between the concentration of FA and the free energy of unfolding with a slope of mFA+pH (the combined contribution of FA and FA-induced lowering of pH), as well as a robust correlation between protein size and mFA+pH We then measured the solubilization of fibrils formed from different FapC variants with varying numbers of repeats as a function of the concentration of FA. This revealed a decline in the number of residues driving amyloid formation upon deleting at least two repeats. The midpoint of denaturation declined with the removal of repeats. Complete removal of all repeats led to fibrils that were solubilized at FA concentrations 2-3 orders of magnitude lower than the repeat-containing variants, showing that at least one repeat is required for the stability of functional amyloid.

The potential of lactoferrin, ovotransferrin and lysozyme as antiviral and immune-modulating agents in COVID-19

Coronavirus disease 2019 (COVID-19), caused by SARS coronavirus 2 (SARS-CoV-2), is spreading rapidly with no established effective treatments. While most cases are mild, others experience uncontrolled inflammatory responses with oxidative stress, dysregulation of iron and coagulation as features. Lactoferrin, ovotransferrin and lysozyme are abundant, safe antimicrobials that have wide antiviral as well as immunomodulatory properties. In particular, lactoferrin restores iron homeostasis and inhibits replication of SARS-CoV, which is closely related to SARS-CoV-2. Ovotransferrin has antiviral peptides and activities that are shared with lactoferrin. Both lactoferrin and lysozyme are ‘immune sensing’ as they may stimulate immune responses or resolve inflammation. Mechanisms by which these antimicrobials may treat or prevent COVID-19, as well as sources and forms of these, are reviewed.

In-depth understanding of a nano-bio interface between lysozyme and Au NP-immobilized N-doped reduced graphene oxide 2-D scaffolds

In the present work, nitrogen-doped reduced graphene oxide (NrGO) was synthesized via a hydrothermal treatment of graphene oxide (GO) in the presence of urea. Gold nanoparticles (Au(0) NPs) were immobilized over the surface of NrGO (Au(0)-NrGO). Characterization of the Au(0)-NrGO nanocomposite via FT-IR spectroscopy, Raman spectroscopy, elemental mapping and XPS revealed the doping of N atoms during the reduction of GO. XRD and XPS studies confirmed the presence of Au(0) NPs and EDS analysis showed a 4.51 wt% loading of Au NPs in the Au(0)-NrGO nanocomposite. The morphology of Au(0)-NrGO was explored by SEM and TEM, which showed the presence of spherical Au metal NPs uniformly immobilized on the surface of NrGO. Further, studies on lysozyme (Lys) in the presence of Au(0)-NrGO by UV-visible, fluorescence, and circular dichroism spectroscopy revealed a conformational change in Lys and electrostatic interaction between Lys and Au(0)-NrGO. The DLS result showed an enhancement in the size of the Au(0)-NrGO and Lys conjugates. The Au(0)-NrGO-induced conformational changes in the structure of Lys resulted in a significant decrease in its activity at a certain concentration of Au(0)-NrGO. Moreover, the results showed that Lys favorably binds with the surface of Au(0)-NrGO, resulting in the formation of 2-D scaffolds possibly due to electrostatic and hydrophobic interactions, H-bonding, and interactions between the AuNPs and sulfur-containing amino acid residues of Lys. SEM exhibited the formation of conjugates in the form of 2-D scaffolds due to the biomolecular interactions between Lys and Au(0)-NrGO. The TEM studies revealed that Lys agglomerated around the Au(0) NPs immobilized on the surface of NrGO, which suggests the formation of a protein corona (PC) around the AuNPs. Furthermore, the favorable Au(0) NP-sulphur (PC) interaction was confirmed by the disappearance of the S-S stretching band in the Raman spectra. Overall, the results obtained provide insight into the nano-bio interface and formation of Au(0) NP-PC, which can be used for bioinspired applications, such as biosensing and imaging and the development of advanced functional Au NPs.

Proteins as diverse, efficient, and evolvable scaffolds for artificial metalloenzymes

We have extracted and categorized the desirable properties of proteins that are adapted as the scaffolds for artificial metalloenzymes.

Strategic planning of proteins in ionic liquids: future solvents for the enhanced stability of proteins against multiple stresses

Ionic liquids (ILs) present a vast number of solvents capable of replacing toxic organic solvents in chemical, biotechnology and biomedical applications. ILs are inexpensive and environmentally friendly as the materials can be recycled conveniently. Chemists use a variety of cation and anion combinations to produce an IL that fits the requirements of the sustainable future through the pursuit of greener chemical processes. As such, the development of various types of ILs has been recognized as the emergence of environmentally friendly solvents to attain enhanced protein stability in vitro. The literature survey reveals that there exist a large number of scholarly articles as well as elegant reviews on protein stability in ILs. Biomolecules have adapted to antagonistic environmental stresses that normally denature proteins, and the mechanism of adaptation that protects the cellular components against denaturation involves the intracellular concentration of co-solvents. In this regard, recent experimental results distinctly demonstrated that ILs are stabilizing proteins against denaturing stresses, and their presence in the cells does not alter protein functional activities. However, a review focusing particularly on the refolding and counteracting effects of the ILs against denatured proteins by multiple stresses is still missing. This perspective unveils the studies that have been conducted to improve protein stabilities with ILs as well as the refolding and counteracting abilities of these ILs against the denatured proteins under the influence of multiple stresses. We believe that ILs can provide significant environmental and economic advantages for biochemical processes in the near future. Essentially, numerous investigations are required to allow us to further explore the stabilizing properties of ILs over proteins.

Charge-Based Separation of Proteins Using Polyelectrolyte Complexes as Models for Membraneless Organelles

Membraneless organelles are liquid compartments within cells with different solvent properties than the surrounding environment. This difference in solvent properties is thought to result in function-related selective partitioning of proteins. Proteins have also been shown to accumulate in polyelectrolyte complexes, but whether the uptake in these complexes is selective has not been ascertained yet. Here, we show the selective partitioning of two structurally similar but oppositely charged proteins into polyelectrolyte complexes. We demonstrate that these proteins can be separated from a mixture by altering the polyelectrolyte complex composition and released from the complex by lowering the pH. Combined, we demonstrate that polyelectrolyte complexes can separate proteins from a mixture based on protein charge. Besides providing deeper insight into the selective partitioning in membraneless organelles, potential applications for selective biomolecule partitioning in polyelectrolyte complexes include drug delivery or extraction processes.

Preparation and characterization of endolysin-containing liposomes and evaluation of their antimicrobial activities against gram-negative bacteria

The overuse and misuse of antibiotics in treating bacterial infections cause the rapid emergence of drug-resistant bacteria, suggesting that the development of alternative strategies to control antibiotic-resistant bacteria is urgently needed. Endolysins are bacteriophage-encoded enzymes that can degrade peptidoglycan in bacterial cell walls, and they have great potential as alternative antimicrobial agents. However, exogenous application of recombinant endolysin is limited to Gram-positive bacteria because endolysins cannot penetrate the outer membrane of Gram-negative bacteria. Here, a liposome-mediated endolysin encapsulation system was developed, and its ability to penetrate the outer membrane of Gram-negative bacteria was tested. The phage-derived endolysin BSP16Lys was isolated, characterized, and used for encapsulation into a cationic liposome comprised of dipalmitoylphosphatidylcholine (DPPC), cholesterol, and hexadecylamine. The BSP16Lys-encapsulated liposome had a high zeta potential value (over 30 mV) with an average diameter of 303 nm. The encapsulation efficiency of BSP16Lys into the liposome was 35.27%. Salmonella Typhimuriumand Escherichia coli cells treated with BSP16Lys-encapsulated liposomes showed 2.2-log CFU/mL and 1.6-log CFU/mL reductions in the viable cell numbers, respectively, without treatment of a membrane permeabilizer. These results showed potential for liposome-mediated delivery of endolysin for exogenous application against Gram-negative bacteria.

Thermally Stable Ionic Liquid-Based Microemulsions for High-Temperature Stabilization of Lysozyme at Nanointerfaces

The development of new strategies for thermal stability and storage of enzymes is very important, considering the nonretention of catalytic activity by enzymes under harsh conditions of temperature. Following this, herein, a new approach based on the interfacial adsorption of lysozyme (LYZ) at nanointerfaces of ionic liquid (IL)-based microemulsions, for enhanced thermal stability of LYZ, is reported. Microemulsions (MEs) composed of dialkyl imidazolium-based surface active ILs (SAILs) as surfactants, ILs as the nonpolar phase, and ethylene glycol (EG) as the polar phase, without any cosurfactants, have been prepared and characterized in detail. Various regions corresponding to polar-in-IL, bicontinuous, and IL-in-polar phases have been characterized using conductivity measurements. Dynamic light scattering (DLS) measurements have provided insights into the size distribution of microdroplets, whereas temperature-dependent DLS measurements established the thermal stability of the MEs. Nanointerfaces formed by SAILs with EG in thermally stable reverse MEs act as fluid scaffolds to adsorb and provide thermal stability, up to 120 °C, to LYZ. Thermally treated LYZ upon extraction into a buffer shows enzyme activity owing to negligible change in the active site of LYZ, as marked by retention of microenvironment of Trp residues present in the active site of LYZ. The present work is expected to establish a new platform for the development of novel nanointerfaces utilizing biobased components for other biomedical applications.