Advanced drug delivery systems for local treatment of the oral cavity

Recent advances in injectable hydrogel therapies for periodontitis

Periodontitis is an immune-inflammatory disease caused by dental plaque, and deteriorates the periodontal ligament, causes alveolar bone loss, and may lead to tooth loss. To treat periodontitis, antibacterial and anti-inflammation approaches are required to reduce bone loss. Thus, appropriate drug administration methods are significant. Due to their "syringeability", biocompatibility, and convenience, injectable hydrogels and associated methods have been extensively studied and used for periodontitis therapy. Such hydrogels are made from natural and synthetic polymer materials using physical and/or chemical cross-linking approaches. Interestingly, some injectable hydrogels are stimuli-responsive hydrogels, which respond to the local microenvironment and form hydrogels that release drugs. Therefore, as injectable hydrogels are different and highly varied, we systematically reviewed the periodontal treatment field from three perspectives: raw material sources, cross-linking methods, and stimuli-responsive methods. We then discussed current challenges and opportunities for the translation of hydrogels to clinic, which may guide further injectable hydrogel designs for periodontitis.

Mucoadhesive Polymeric Polyologels Designed for the Treatment of Periodontal and Related Diseases of the Oral Cavity

The study objective was to design and characterise herein unreported polyologels composed of a range of diol and triol solvents and polyvinyl methyl ether-co-maleic acid (PVM/MA) and, determine their potential suitability for the treatment of periodontal and related diseases in the oral cavity using suitable in vitro methodologies. Polyologel flow and viscoelastic properties were controlled by the choice of solvent and the concentration of polymer. At equivalent polymer concentrations, polyologels prepared with glycerol (a triol) exhibited the greatest elasticity and resistance to deformation. Within the diol solvents (PEG 400, pentane 1,5-diol, propane 1,2-diol, propane 1,3-diol, and ethylene glycol), PEG 400 polyologels possessed the greatest elasticity and resistance to deformation, suggesting the importance of distance of separation between the diol groups. Using Raman spectroscopy bond formation between the polymer carbonyl group and the diol hydroxyl groups was observed. Polyologel mucoadhesion was influenced by viscoelasticity; maximum mucoadhesion was shown by glycerol polyologels at the highest polymer concentration (20% w/w). Similarly, the choice of solvent and concentration of PVM/MA affected the release of tetracycline from the polyologels. The controlled release of tetracycline for at least 10 h was observed for several polyologels, which, in combination with their excellent mucoadhesion and flow properties, offer possibilities for the clinical use of these systems to treat diseases within the oral cavity.

Oleogel-based drug delivery for the treatment of periodontitis: current strategies and future perspectives

Periodontitis is the chronic inflammation of tooth-supporting tissues that leads to loss of tooth support if untreated. Conventional therapy for periodontitis (mechanical removal of microbial biofilm and oral hygiene enforcement) is augmented by anti-microbial and anti-inflammatory drugs. These drugs are frequently delivered locally into the periodontal pocket for maximum efficiency and minimum adverse effects. The potential of oleogels for periodontal drug delivery has been discussed and further, the future scope of oleogel-based drug delivery systems in dentistry. An oleogel-based local drug delivery system offers several advantages over other systems. Superior mechanical properties (firmness and compressibility), muco-adhesion, shear thinning, thixotropy, controlled drug release and the ability to incorporate water-insoluble drugs clearly distinguish and highlight the potential of oleogels as periodontal local drug delivery systems. Bigels can combine the qualities of both hydrogels and oleogels to provide a more promising option for drug delivery. However, there is limited evidence concerning oleogels as local drug delivery agents in periodontics. Further studies are needed to discern the clinical efficacy of oleogel-based drug delivery systems.

Dental delivery systems of antimicrobial drugs using chitosan, alginate, dextran, cellulose and other polysaccharides: A review

Dental caries, periodontal disease, and endodontic disease are major public health concerns worldwide due to their impact on individuals' quality of life. The present problem of dental disorders is the removal of the infection caused by numerous microbes, particularly, bacteria (both aerobes and anaerobes). The most effective method for treating and managing dental diseases appears to be the use of antibiotics or other antimicrobials, which are incorporated in some drug delivery systems. However, due to their insufficient bioavailability, poor availability for gastrointestinal absorption, and pharmacokinetics after administration via the oral route, many pharmaceutical medicines or natural bioactive substances have limited efficacy. During past few decades, a range of polysaccharide-based systems have been widely investigated for dental dug delivery. The polysaccharide-based carrier materials made of chitosan, alginate, dextran, cellulose and other polysaccharides have recently been spotlighted on the recent advancements in preventing, treating and managing dental diseases. The objective of the current review article is to present a brief comprehensive overview of the recent advancements in polysaccharide-based dental drug delivery systems for the delivery of different antimicrobial drugs.

Innovative Delivery and Release Systems for Antioxidants and Other Active Substances in the Treatment of Cancer

Cancer is one of the major diseases leading to death worldwide, and the fight against the disease is still challenging. Cancer diseases are usually associated with increased oxidative stress and the accumulation of reactive oxygen and nitrogen species as a result of metabolic alterations or signaling aberrations. While numerous antioxidants exhibit potential therapeutic properties, their clinical efficiency against cancer is limited and even unproven. Conventional anticancer antioxidants and drugs have, among others, the great disadvantage of low bioavailability, poor targeting efficiency, and serious side effects, constraining their use in the fight against diseases. Here, we review the rationale for and recent advances in potential delivery systems that could eventually be employed in clinical research on antioxidant therapy in cancer. We also review some of the various strategies aimed at enhancing the solubility of poorly water-soluble active drugs, including engineered delivery systems such as lipid-based, polymeric, and inorganic formulations. The use of cyclodextrins, micro- and nanoemulsions, and thermosensitive smart liposomes as useful systems for the delivery and release of poorly aqueous-soluble drugs, improving their bioactivity and stability, is also addressed. We also provide some details on their formulation processes and their use in a variety of medical applications. Finally, we briefly cover a case study specifically focused on the use of delivery systems to minimize oral cancer and associated dental problems.

Propolis Controlled Delivery Systems for Oral Therapeutics in Dental Medicine: A Systematic Review

This systematic review synthesizes the existing evidence in the literature regarding the association of propolis with controlled delivery systems (DDSs) and its potential therapeutic action in dental medicine. Two independent reviewers performed a literature search up to 1 June 2023 in five databases: PubMed/Medline, Web of Science, Cochrane Library, Scopus, and Embase, to identify the eligible studies. Clinical, in situ, and in vitro studies that investigated the incorporation of propolis as the main agent in DDSs for dental medicine were included in this study. Review articles, clinical cases, theses, dissertations, conference abstracts, and studies that had no application in dentistry were excluded. A total of 2019 records were initially identified. After carefully examining 21 full-text articles, 12 in vitro studies, 4 clinical, 1 animal model, and 3 in vivo and in vitro studies were included (n = 21). Relevant data were extracted from the included studies and analyzed qualitatively. The use of propolis has been reported in cariology, endodontics, periodontics, stomatology, and dental implants. Propolis has shown non-cytotoxic, osteoinductive, antimicrobial, and anti-inflammatory properties. Moreover, propolis can be released from DDS for prolonged periods, presenting biocompatibility, safety, and potential advantage for applications in dental medicine.

Are Local Drug Delivery Systems a Challenge in Clinical Periodontology?

Placing antimicrobial treatments directly in periodontal pockets is an example of the local administration of antimicrobial drugs to treat periodontitis. This method of therapy is advantageous since the drug concentration after application far surpasses the minimum inhibitory concentration (MIC) and lasts for a number of weeks. As a result, numerous local drug delivery systems (LDDSs) utilizing various antibiotics or antiseptics have been created. There is constant effort to develop novel formulations for the localized administration of periodontitis treatments, some of which have failed to show any efficacy while others show promise. Thus, future research should focus on the way LDDSs can be personalized in order to optimize future clinical protocols in periodontal therapy.

Antibacterial effect of a gingival patch containing nano-emulsion of red dragon fruit peel extract on Porphyromonas gingivalis, Aggregatibacter actinomycetemcomitans, and Fusobacterium nucleatum assessed in vitro

Background

The most common bacteria causing periodontitis were Porphyromonas gingivalis, Fusobacterium nucleatum and Aggregatibacter actinomycetemcomitans. At present, plants are considered a valuable source of natural materials for use in the development of antimicrobial, anti-inflammatory and antioxidant agents. Hylocereus plyrhizus or red dragon fruit peel extract (RDFPE) contains terpenoids, and flavonoids can be an alternative. The gingival patch (GP) has been designed to ensure drug delivery and absorption into tissue targets.

Objective

To assess the effect of a mucoadhesive gingival patch containing nano-emulsion of red dragon fruit peel extract (GP-nRDFPE) in inhibiting Porphyromonas gingivalis, Fusobacterium nucleatum and Aggregatibacter actinomycetemcomitans as compared to control groups.

Material and method

Inhibition by diffusion method was carried out in Porphyromonas gingivalis, Fusobacterium nucleatum and Aggregatibacter actinomycetemcomitans medium. The test material was gingival patch mucoadhesive containing nano-emulsion red dragon fruit peel extract (GP-nRDFPR), gingival patch mucoadhesive containing red dragon fruit peel extract (GP-RDFPE), gingival patch mucoadhesive containing doxycycline (GP-dcx) and blank gingival patch (GP), conducted in four replications. The differences in the inhibition were analyzed using ANOVA and post hoc tests (p < 0.05).

Result

GP-nRDFPE showed higher inhibition in Porphyromonas gingivalis, Aggregatibacter actinomycetemcomitans, and Fusobacterium nucleatum compared to GP-RDFPE at the concentrations 3.125% and 6.25% (p < 0.05).

Conclusion

The GP-nRDFPE showed better anti-periodontic bacteria to Porphyromonas gingivalis, Fusobacterium nucleatum, and Aggregatibacter actinomycetemcomitans in line with its concentration. This is assumed that the GP-nRDFPE can use as periodontitis treatment.

Nanoencapsulation of Grapefruit Seed Extract and Cinnamon Oil for Oral Health: Preparation, In Vitro, and Clinical Antimicrobial Activities

This study aimed to formulate mucoadhesive antimicrobial nanoparticles using natural antimicrobials and biopolymers for oral health and verify their antimicrobial activity in clinical studies. A combination of grapefruit seed extract and cinnamon oil (GCN) and chitosan/carrageenan (CS/CR) were selected as synergistic antimicrobial combinations and mucoadhesive wall materials for nanoparticles, respectively. GCN nanoparticles (NPs; size = 357 nm and polydispersity index = 0.188) prepared by ionic gelation between CS and CR exhibited synergistic antimicrobial activity between grapefruit seed extract and cinnamon oil and significantly higher antimicrobial activity against Streptococcus mutans and sobrinus than free GCN in a time-kill assay. The clinical antibacterial activity of GCN was significantly increased and sustained by nanoencapsulation in the mouth-rinse test and GCN NP-treated drinking yogurt. These results suggest that GCN-loaded CS/CR nanoencapsulation is a promising technique that can inhibit oral bacteria with or without the presence of other food ingredients.

Mechanochemical Properties of Mucoadhesive Tablets Based on PVP/HPβCD Electrospun Nanofibers as Local Delivery of Polygoni cuspidati Extract for Treating Oral Infections

This study investigated the ability of PVP/HPβCD-based electrospun nanofibers to enhance the dissolution rate of poorly soluble polydatin and resveratrol, the main active components of Polygoni cuspidati extract. To make a solid unit dosage form that would be easier to administer, extract-loaded nanofibers were ground. SEM examination was used to analyze the nanostructure of the fibers, and the results of the cross-section of the tablets showed that they had maintained their fibrous structure. The release of the active compounds (polydatin and resveratrol) in the mucoadhesive tablets was complete and prolonged in time. Additionally, the possibility of staying on the mucosa for a prolonged time has also been proven for both tablets from PVP/HPβCD-based nanofibers and powder. The appropriate physicochemical properties of the tablets, along with the proven antioxidant, anti-inflammatory, and antibacterial properties of P. cuspidati extract, highlight the particular benefits of the mucoadhesive formulation for use as a drug delivery system for periodontal diseases.

New Technological Approaches for Dental Caries Treatment: From Liquid Crystalline Systems to Nanocarriers

Dental caries is the most common oral disease, with high prevalence rates in adolescents and low-income and lower-middle-income countries. This disease originates from acid production by bacteria, leading to demineralization of the dental enamel and the formation of cavities. The treatment of caries remains a global challenge and the development of effective drug delivery systems is a potential strategy. In this context, different drug delivery systems have been investigated to remove oral biofilms and remineralize dental enamel. For a successful application of these systems, it is necessary that they remain adhered to the surfaces of the teeth to allow enough time for the removal of biofilms and enamel remineralization, thus, the use of mucoadhesive systems is highly encouraged. Among the systems used for this purpose, liquid crystalline systems, polymer-based nanoparticles, lipid-based nanoparticles, and inorganic nanoparticles have demonstrated great potential for preventing and treating dental caries through their own antimicrobial and remineralization properties or through delivering drugs. Therefore, the present review addresses the main drug delivery systems investigated in the treatment and prevention of dental caries.

Applications of Hydrogels in Drug Delivery for Oral and Maxillofacial Diseases

Oral and maxillofacial diseases have an important impact on local function, facial appearance, and general health. As a multifunctional platform, hydrogels are widely used in the biomedical field due to their excellent physicochemical properties. In recent years, a large number of studies have been conducted to adapt hydrogels to the complex oral and maxillofacial environment by modulating their pore size, swelling, degradability, stimulus-response properties, etc. Meanwhile, many studies have attempted to use hydrogels as drug delivery carriers to load drugs, cytokines, and stem cells for antibacterial, anticancer, and tissue regeneration applications in oral and maxillofacial regions. This paper reviews the application and research progress of hydrogel-based drug delivery systems in the treatment of oral and maxillofacial diseases such as caries, endodontic diseases, periodontal diseases, maxillofacial bone diseases, mucosal diseases, oral cancer, etc. The characteristics and applications of hydrogels and drug-delivery systems employed for the treatment of different diseases are discussed in order to provide a reference for further research on hydrogel drug-delivery systems in the future.

In Vitro and In Vivo Characterisation of a Mucoadhesive Buccal Film Loaded with Doxycycline Hyclate for Topical Application in Periodontitis

Mucoadhesive films loaded with doxycycline hyclate (Doxy Hyc), consisting of mixtures of hydroxypropylmethyl cellulose (HPMC) E3, K4 and polyacrylic acid (Carbopol 940), were prepared by casting method, aiming to design a formulation intended for application in the oral cavity. The obtained film formulations exhibited a Doxy Hyc content between 7.52 ± 0.42 and 7.83 ± 0.41%, which had adequate mechanical properties for application in the oral cavity and pH values in the tolerance range. The x-ray diffraction studies highlighted the amorphisation of Doxy Hyc in the preparation process and the antibiotic particles present on the surface of the films, identified in the TEM images, which ensured a burst release effect in the first 15 min of the in vitro dissolution studies, after which Doxy Hyc was released by diffusion, the data presenting a good correlation with the Peppas model, n < 0.5. The formulation F1, consisting of HPMC K4 combined with C940 in a ratio of 5:3, the most performing in vitro, was tested in vivo in experimentally-induced periodontitis and demonstrated its effectiveness in improving the clinical parameters and reducing the salivary levels of matrix metalloproteinase-8 (MMP-8). The prepared Doxy Hyc loaded mucoadhesive buccal film could be used as an adjuvant for the local treatment of periodontitis, ensuring prolonged release of the antibiotic after topical application.

Emerging Trends in Advanced Translational Applications of Silver Nanoparticles: A Progressing Dawn of Nanotechnology

Nanoscience has emerged as a fascinating field of science, with its implementation in multiple applications in the form of nanotechnology. Nanotechnology has recently been more impactful in diverse sectors such as the pharmaceutical industry, agriculture sector, and food market. The peculiar properties which make nanoparticles as an asset are their large surface area and their size, which ranges between 1 and 100 nanometers (nm). Various technologies, such as chemical and biological processes, are being used to synthesize nanoparticles. The green chemistry route has become extremely popular due to its use in the synthesis of nanoparticles. Nanomaterials are versatile and impactful in different day to day applications, resulting in their increased utilization and distribution in human cells, tissues, and organs. Owing to the deployment of nanoparticles at a high demand, the need to produce nanoparticles has raised concerns regarding environmentally friendly processes. These processes are meant to produce nanomaterials with improved physiochemical properties that can have significant uses in the fields of medicine, physics, and biochemistry. Among a plethora of nanomaterials, silver nanoparticles have emerged as the most investigated and used nanoparticle. Silver nanoparticles (AgNPs) have become vital entities of study due to their distinctive properties which the scientific society aims to investigate the uses of. The current review addresses the modern expansion of AgNP synthesis, characterization, and mechanism, as well as global applications of AgNPs and their limitations.

Bacterial cellulose adhesive patches designed for soft mucosal interfaces

The wet environment in the oral cavity is challenging for topical disease management approaches. The compromised material properties leading to weak adhesion and short retention (<8 h) in such environment result in frequent reapplication of the therapeutics. Composites of bacterial cellulose (BC) and carbene-based bioadhesives attempt to address these shortcomings. Previous designs comprised of aqueous formulations. The current design, for the first time, presents dry, shelf-stable cellulose patches for convenient ready-to-use application. The dry patches simultaneously remove tissue surface hydration while retaining carbene-based photocuring and offers on-demand adhesion. The dry patch prototypes are optimized by controlling BC/adhesive mole ratios and dehydration technique. The adhesion strength is higher than commercial denture adhesives on soft mucosal tissues. The structural integrity is maintained for a minimum of 7 days in aqueous environment. The patches act as selective nanoporous barrier against bacteria while allowing permeation of proteins. The results support the application of BC-based adhesive patches as a flexible platform for wound dressings, drug depots, or combination thereof.

Administration strategies and smart devices for drug release in specific sites of the upper GI tract

Targeting the release of drugs in specific sites of the upper GI tract would meet local therapeutic goals, improve the bioavailability of specific drugs and help overcoming compliance-related limitations, especially in chronic illnesses of great social/economic impact and involving polytherapies (e.g. Parkinson's and Alzeimer's disease, tubercolosis, malaria, HIV, HCV). It has been traditionally pursued using gastroretentive (GR) systems, i.e. low-density, high-density, magnetic, adhesive and expandable devices. More recently, the interest towards oral administration of biologics has prompted the development of novel drug delivery systems (DDSs) provided with needles and able to inject different formulations in the mucosa of the upper GI tract and particularly of esophagus, stomach or small intestine. Besides comprehensive literature analysis, DDSs identified as smart devices in view of their high degree of complexity in terms of design, working mechanism, materials employed and manufacturing steps were discussed making use of graphic tools.

Mucoadhesive Nanocarriers as a Promising Strategy to Enhance Intracellular Delivery against Oral Cavity Carcinoma

Oral cancer, particularly squamous cell carcinoma (SCC), has posed a grave challenge to global health due to its high incidence, metastasis, and mortality rates. Despite numerous studies and favorable improvements in the therapeutic strategies over the past few decades, the prognosis of this disease remains dismal. Moreover, several drawbacks are associated with the conventional treatment; including permanent disfigurement and physical impairment that are attributed to surgical intervention, and systemic toxicity that results from aggressive radio- or chemotherapies, which impacts patients’ prognosis and post-treatment quality of life. The highly vascularized, non-keratinized oral mucosa appears as a potential route for cytotoxic drug administration in treating oral cancer. It acts as a non-invasive portal for drug entry targeting the local oral lesions of the early stages of cancer and the systemic metastasis sites of advanced cancer. The absorption of the poorly aqueous-soluble anti-cancer drugs can be enhanced due to the increased permeability of the ulcerous mucosa lining in the disease state and by bypassing the hepatic first-pass metabolism. However, some challenges in oral transmucosal drug delivery include the drugs’ taste, the limited surface area of the membrane lining the oral cavity, and flushing and enzymatic degradation by saliva. Therefore, mucoadhesive nanocarriers have emerged as promising platforms for controlled, targeted drug delivery in the oral cavity. The surface functionalization of nanocarriers with various moieties allows for drug targeting, bioavailability enhancement, and biodistribution at the site of action, while the mucoadhesive feature prolongs the drug’s residence time for preferential accumulation to optimize the therapeutic effect and reduce systemic toxicity. This review has been focused to highlight the potential of various nanocarriers (e.g., nanoparticles, nanoemulsions, nanocapsules, and liposomes) in conferring targeting, solubility and bioavailability enhancement of actives and mucoadhesive properties as novel tumor-targeted drug delivery approaches in oral cancer treatment.

Probiotics-Containing Mucoadhesive Gel for Targeting the Dysbiosis Associated with Periodontal Diseases

Objective

Periodontitis is a common disorder that leads to the loss of both tooth and personal well-being, contributing to worsen the risk for metabolic and cardiovascular diseases. Recently, probiotics, characterized by rapid oral dispersion, have been topically used. Here, we present data of a mucoadhesive gel containing probiotics, capable of ensuring a slow release of bacteria to prevent and treat periodontitis.

Methods

An original mucoadhesive gel (AL0005) that is anhydrous and of food grade, loaded with the blend of lactobacilli and plants' dry extracts, has been assayed.

Results

The release kinetics of the bacterial mixture in different experimental models in vitro, including simulated saliva or physiological solutions, showed a significant and stable release for 5–8 hours. In one in vivo study of a mouse model of periodontitis, a locally applied mucoadhesive gel enriched with probiotic strains improved significantly the tissue pathology when compared with vehicle-exposed mice.

Conclusions

Together, the results suggest that this mucoadhesive gel can be useful in the normalization of the gum bacterial flora and improvement of the tissue pathology of gum disorders.

Fibrillated bacterial cellulose liquid carbene bioadhesives for mimicking and bonding oral cavity surfaces

Topical treatments for oral wounds and infections exhibit weak adhesion to wet surfaces which results in short retention duration (6-8 hours), frequent dosing requirement and patient incompatibility. To address these limitations, aqueous composites made of fibrillated bacterial cellulose and photoactive bioadhesives are designed for soft epithelial surfaces. The aqueous composites crosslink upon photocuring within a minute and exhibit a transition from viscous to elastic adhesive hydrogels. The light-cured composites have shear moduli mimicking oral mucosa and other soft tissues. The tunable adhesion strength ranges from 3 to 35 kPa on hydrated tissue-mimicking surfaces (collagen film). The results support the application of bacterial cellulose hydrogel systems for potential treatment of mucosal wounds.

Biocompatible and Biomaterials Application in Drug Delivery System in Oral Cavity

Biomaterials applications have rapidly expanded into different fields of sciences. One of the important fields of using biomaterials is dentistry, which can facilitate implantation, surgery, and treatment of oral diseases such as peri-implantitis, periodontitis, and other dental problems. Drug delivery systems based on biocompatible materials play a vital role in the release of drugs into aim tissues of the oral cavity with minimum side effects. Therefore, scientists have studied various delivery systems to improve the efficacy and acceptability of therapeutic approaches in dental problems and oral diseases. Also, biomaterials could be utilized as carriers in biocompatible drug delivery systems. For instance, natural polymeric substances, such as gelatin, chitosan, calcium phosphate, alginate, and xanthan gum are used to prepare different forms of delivery systems. In addition, some alloys are conducted in drug complexes for the better in transportation. Delivery systems based on biomaterials are provided with different strategies, although individual biomaterial has advantages and disadvantages which have a significant influence on transportation of complex such as solubility in physiological environments or distribution in tissues. Biomaterials have antibacterial and anti-inflammatory effects and prolonged time contact and even enhance antibiotic activities in oral infections. Moreover, these biomaterials are commonly prepared in some forms such as particulate complex, fibers, microspheres, gels, hydrogels, and injectable systems. In this review, we examined the application of biocompatible materials in drug delivery systems of oral and dental diseases or problems.

Bacterial cellulose adhesive composites for oral cavity applications

Topical approaches to oral diseases require frequent dosing due to limited retention time. A mucoadhesive drug delivery platform with extended soft tissue adhesion capability of up to 7 days is proposed for on-site management of oral wound. Bacterial cellulose (BC) and photoactivated carbene-based bioadhesives (PDz) are combined to yield flexible film platform for interfacing soft tissues in dynamic, wet environments. Structure-activity relationships evaluate UV dose and hydration state with respect to adhesive strength on soft tissue mimics. The bioadhesive composite has an adhesion strength ranging from 7 to 17 kPa and duration exceeding 48 h in wet conditions under sustained shear forces, while other mucoadhesives based on hydrophilic macromolecules exhibit adhesion strength of 0.5-5 kPa and last only a few hours. The work highlights the first evaluation of BC composites for mucoadhesive treatments in the buccal cavity.

Evolution of Drug Delivery Systems for Recurrent Aphthous Stomatitis

Recurrent aphthous stomatitis (RAS) is a disease marked by painful oral lesions on the buccal and labial mucosa or tongue. Drug delivery systems (DDS) for RAS include topical forms that manage wound healing, cover the ulcer, and relieve the associated pain. DDS targeting the oral mucosa face a major challenge, especially the short residence times in the mouth due to the effect of “saliva wash-out”, which continually removes the drug. The objective of this review is to study the development of preparation forms and delivery systems of various types and preparations that have been used for RAS management from 1965 until February 2020. There are 20 types of DDS for RAS which were discussed in 62 articles. The preparations were classified into 4 preparation forms: liquid, semi-solid, solid, and miscellaneous. In addition, the ultimate DDS for RAS preparations is the semi-solid forms (41.94%), which include 5 types of DDS are gel, paste, patch, cream, and ointment. This preparation was developed into new preparation form (11.29%), such as adhesive alginates, dentifrice, OraDisc, membranes, bioresorbable plates, pellicles, and gelosomes. Generally, the mucosal drug delivery system is the method of choice in RAS treatment because the ulcer is commonly located in the oral mucosa. In conclusion, these preparations are designed to improve drug delivery and drug activity for the treatment of RAS ulcers. Moreover, almost all of these DDS are topical preparations that use various types of mucoadhesive polymers to increase both residence time in the oral mucosa and pain relief in RAS treatment.

Local Drug Delivery Systems for Vital Pulp Therapy: A New Hope

Vital pulp therapy (VPT) is deliberated as an ultraconservative/minimally invasive approach for the conservation of vital pulpal tissues, preservation of dental structure, and maintenance of tooth function in the oral cavity. In VPT, following the exposure of the dental pulp, the environment is prepared for the possible healing and probable refunctionalisation of pulpal connective tissue. However, to succeed in VPT, specific biomaterials are used to cover and/or dress the exposed pulp, lower the inflammation, heal the dental pulp, provoke the remaining odontoblastic cells, and induce the formation of a hard tissue, i.e., the dentinal bridge. It can be assumed that if the employed biomaterial is transferred to the target site using a specially designed micro-/nanosized local drug delivery system (LDDS), the biomaterial would be placed in closer proximity to the connective tissue, may be released in a controlled and sustained pattern, could properly conserve the remaining dental pulp and might appropriately enhance hard-tissue formation. Furthermore, the loaded LDDS could help VPT modalities to be more ultraconservative and may minimise the manipulation of the tooth structure as well as pulpal tissue, which could, in turn, result in better VPT outcomes.

Gingipain-Responsive Thermosensitive Hydrogel Loaded with SDF-1 Facilitates In Situ Periodontal Tissue Regeneration

Existing local drug delivery systems for periodontitis suffer from poor antibacterial effect and unsatisfied periodontal regeneration. In this study, a smart gingipain-responsive hydrogel (PEGPD@SDF-1) was synthesized as an environmentally sensitive carrier for on-demand drug delivery. The PEGPD@SDF-1 hydrogel was synthesized from polyethylene glycol diacrylate (PEG-DA) based scaffolds, dithiothreitol (DTT), and a novel designed functional peptide module (FPM) via Michael-type addition reaction, and the hydrogel was further loaded with stromal cell derived factor-1 (SDF-1). The FPM exhibiting a structure of anchor peptide-short antimicrobial peptide (SAMP)-anchor peptide could be cleaved by gingipain specifically, and the SAMP was released out of the hydrogel for antibacterial effect in response to gingipain. The hydrogel properties were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), swelling ratio analysis, degradation evaluation, and release curve description of the SAMP and SDF-1. Results in vitro indicated the PEGPD@SDF-1 hydrogel exhibited preferable biocompatibility and could promote the proliferation, migration, and osteogenic differentiation of periodontal ligament stem cells (PDLSCs). Antibacterial testing demonstrated that the PEGPD@SDF-1 hydrogel released the SAMP stressfully in response to gingipain stimulation, thereby strongly inhibiting the growth of Porphyromonas gingivalis. Furthermore, the study in vivo indicated that the PEGPD@SDF-1 hydrogel inhibited P. gingivalis reproduction, created a low-inflammatory environment, facilitated the recruitment of CD90+/CD34- stromal cells, and induced osteogenesis. Taken together, these results suggest that the gingipain-responsive PEGPD@SDF-1 hydrogel could facilitate in situ periodontal tissue regeneration and is a promising candidate for the on-demand local drug delivery system for periodontitis.

Oral probiotic and its delivery carriers to improve oral health: A review

In recent years, oral probiotics have been researched on their effectiveness in reducing and preventing oral diseases. Oral probiotics could be introduced into the oral cavity to keep the equilibrium of the microbiome. Hence, the delivery carrier for oral probiotics plays an important factor to ensure a high number of oral probiotics were delivered and released into the oral cavity. This review presents a brief overview of oral microbiota and the role of oral probiotics in reducing oral diseases. Moreover, important aspects of the oral probiotic product such as viability, adherence ability, health effects, safety, and delivery site were discussed. Besides that, the importance of utilizing indigenous oral probiotics was also emphasized. Oral probiotics are commonly found in the market in the form of chewing tablets, lozenges, and capsules. Hence, the oral probiotic carriers currently used in the market and research were reviewed. Furthermore, this review introduces new potential oral probiotic delivery carriers such as oral strip, bucco-adhesive gel, and mouthwash. Their effectiveness in delivering oral probiotics for oral health was also explored.

A non-toxic, reversibly released imaging probe for oral cancer that is derived from natural compounds

CD44 is emerging as an important receptor biomarker for various cancers. Amongst these is oral cancer, where surgical resection remains an essential mode of treatment. Unfortunately, surgery is frequently associated with permanent disfigurement, malnutrition, and functional comorbidities due to the difficultly of tumour removal. Optical imaging agents that can guide tumour tissue identification represent an attractive approach to minimising the impact of surgery. Here, we report the synthesis of a water-soluble fluorescent probe, namely HA-FA-HEG-OE (compound 1), that comprises components originating from natural sources: oleic acid, ferulic acid and hyaluronic acid. Compound 1 was found to be non-toxic, displayed aggregation induced emission and accumulated intracellularly in vesicles in SCC-9 oral squamous cells. The uptake of 1 was fully reversible over time. Internalization of compound 1 occurs through receptor mediated endocytosis; uniquely mediated through the CD44 receptor. Uptake is related to tumorigenic potential, with non-tumorigenic, dysplastic DOK cells and poorly tumorigenic MCF-7 cells showing only low intracellular levels and highlighting the critical role of endocytosis in cancer progression and metastasis. Together, the recognised importance of CD44 as a cancer stem cell marker in oral cancer, and the reversible, non-toxic nature of 1, makes it a promising agent for real time intraoperative imaging.

Nanoencapsulated fluoride as a remineralization option for dental erosion: an in vitro study

OBJECTIVE

To compare the in vitro performance of different dentifrices indicated for dental erosion and a new dentifrice with controlled fluoride release system (NanoF) in terms of surface microhardness remineralization in enamel erosion lesions.

MATERIALS AND METHODS

72 human enamel specimens were divided into 6 groups (n = 12): PC (100% NaF - positive control); NC (Placebo - negative control); 50%nF (50% NanoF + 50% free NaF), 100%nF (100% NanoF); PN (Sensodyne^® ProNamel™) and AG (Colgate^® Sensitive Pro-Relief™). A surface microhardness analysis was performed before (SH₀) and after (SH₁) the erosion lesion formation. The blocks were submitted to a 5-day de-remineralization cycling model, consisting of 90 s immersion on 0.1% citric acid (4x/day) and 1 min treatment with dentifrice slurries along with 1 mL/block of human saliva (2x/day). Lastly, the final surface microhardness analysis (SH₂) was measured and the percentage of surface microhardness remineralization (%SMH_R) was calculated. Data were analysed with 2-way ANOVA and Tukey's test (p < .05).

RESULTS

Statistically significant differences were observed for SH₂ and %SMH_R between NC and AG with the other groups (p < .05). The best %SMH_R from the experimental groups was found in 100%nF and PN.

CONCLUSION

Dentifrices with NanoF exhibited a surface microhardness remineralization similar to sodium fluoride (PC). Therefore, NanoF dentifrice can be an alternative to prevent and treat patients with dental erosion.

Photodynamic potential of curcumin in bioadhesive formulations: Optical characteristics and antimicrobial effect against biofilms

BACKGROUND

Although Curcumin (CUR) has great potential as a photosensitizer, the low solubility in water impairs its clinical performance in photodynamic inactivation (PDI). This study sought to establish an effective antimicrobial protocol for PDI using CUR in three different bioadhesive formulations.

METHODS

A CUR-loaded chitosan hydrogel with a poloxamer (CUR-CHIH), a CUR-loaded liquid crystal precursor system (CUR-LCP), a CUR-loaded microemulsion (CUR-ME), and CUR in dimethylsulfoxide (DMSO) solution (CUR-S; control formulation) were tested against in vitro and in situ oral biofilms. The optical properties of each formulation were evaluated.

RESULTS

All of the formulations exhibited lower absorbance than CUR-S; however, the CUR-LCP curve bore the highest resemblance. The CUR present in all formulations was completely degraded after 15 min of illumination. In vitro experiments showed that CUR-S was the only formulation able to significantly reduce biofilm viability of Candida albicans and Lactobacillus casei when compared to the negative control (no PDI); the amount of reduction obtained was 1.8 and 3.7 log (CFU/mL) for C. albicans and L. casei, respectively. There was a significant reduction on the viability of Streptococcus mutans biofilms when CUR-S and CUR-LCP were applied (approximately 3.5 and 1.6 log [CFU/mL], respectively). In situ testing showed antimicrobial efficacy against S. mutans and general microorganisms.

CONCLUSIONS

Although the evaluated protocols has not been effective to all of the evaluated microorganisms, PDI showed potential against dental biofilms and evidence that the phototoxic effects of CUR have a high relation with the type of formulation in which it is loaded.

Pharmacokinetic Model Analysis of Supralingual, Oral and Intravenous Deliveries of Mycophenolic Acid

Mycophenolic acid (MPA) is commonly used for organ rejection prophylaxis via oral administration in the clinic. Recent studies have shown that MPA also has anticancer activities. To explore new therapeutic options for oral precancerous/cancerous lesions, MPA was designed to release topically on the dorsal tongue surface via a mucoadhesive patch. The objective of this study was to establish the pharmacokinetic (PK) and tongue tissue distribution of mucoadhesive MPA patch formulation after supralingual administration in rats and also compare the PK differences between oral, intravenous, and supralingual administration of MPA. Blood samples were collected from Sprague Dawley rats before and after a single intravenous bolus injection, a single oral dose, or a mucoadhesive patch administration on the dorsal tongue surface for 4 h, all with a dose of 0.5 mg/kg of MPA. Plots of MPA plasma concentration versus time were obtained. As multiple peaks were found in all three curves, the enterohepatic recycling (EHR) model in the Phoenix software was adapted to describe their PK parameters with an individual PK analysis method. The mean half-lives of intravenous and oral administrations were 10.5 h and 7.4 h, respectively. The estimated bioavailability after oral and supralingual administration was 72.4% and 7.6%, respectively. There was a 0.5 h lag-time presented after supralingual administration. The results suggest that the systemic plasma MPA concentrations were much lower in rats receiving supralingual administration compared to those receiving doses from the other two routes, and the amount of MPA accumulated in the tongue after patch application showed a sustained drug release pattern. Studies on the dynamic of drug retention in the tongue after supralingual administration showed that ~3.8% of the dose was accumulated inside of tongue right after the patch removal, ~0.11% of the dose remained after 20 h, and ~20.6% of MPA was not released from the patches 4 h after application. The data demonstrate that supralingual application of an MPA patch can deliver a high amount of drug at the site of administration with little systemic circulation exposure, hence lowering the potential gastrointestinal side effects associated with oral administration. Thus, supralingual administration is a potential alternative route for treating oral lesions.

Current status and future of delivery systems for prevention and treatment of infections in the oral cavity

Oral health reflects the general health, and it is fundamental to well-being and quality of life. An infection in the oral cavity can be associated with serious complications in human health. Local therapy of these infections offers many advantages over systemic drug administration, targeting directly to the diseased area while minimizing systemic side effects. Specialized drug delivery systems into the oral cavity have to be designed in such a fashion that they resist to the aqueous environment that is constantly bathed in saliva and subject to mechanical forces. Additionally, a prolonged release of drug should also be provided, which would enhance the efficacy and also decrease the repeated dosing. This review is aimed to summarize the current most relevant findings related to local drug delivery of various drug groups for prevention and treatment of infections (viral, bacterial, fungal) and infection-related manifestations in the oral cavity. Current therapeutic challenges in regard to effective local drug delivery systems will be discussed, and the recent approaches to overcome these obstacles will be reviewed. Finally, future prospects will be overviewed to promote novel strategies that can be implemented in clinical management for prevention and treatment of oral infections.

The Benefits of Smart Nanoparticles in Dental Applications

Dentistry, as a branch of medicine, has undergone continuous evolution over time. The scientific world has focused its attention on the development of new methods and materials with improved properties that meet the needs of patients. For this purpose, the replacement of so-called "passive" dental materials that do not interact with the oral environment with "smart/intelligent" materials that have the capability to change their shape, color, or size in response to an externally stimulus, such as the temperature, pH, light, moisture, stress, electric or magnetic fields, and chemical compounds, has received much attention in recent years. A strong trend in dental applications is to apply nanotechnology and smart nanomaterials such as nanoclays, nanofibers, nanocomposites, nanobubbles, nanocapsules, solid-lipid nanoparticles, nanospheres, metallic nanoparticles, nanotubes, and nanocrystals. Among the nanomaterials, the smart nanoparticles present several advantages compared to other materials, creating the possibility to use them in various dental applications, including preventive dentistry, endodontics, restoration, and periodontal diseases. This review is focused on the recent developments and dental applications (drug delivery systems and restoration materials) of smart nanoparticles.

Development and optimisation of simulated salivary fluid for biorelevant oral cavity dissolution

Drug release within the oral cavity can be of paramount importance for formulations that are designed for specific purposes such as taste-masking, faster onset of therapeutic action, localization of treatment or avoidance of first-pass metabolism. Preclinical methods for assessment of dissolution in the oral cavity are necessary for design and development of these formulation but currently there is no consensus on what variables should be defined to achieve biorelevance in these tests. In this study, biorelevant simulated salivary fluids (SSFs) that can be uniformly applied for oral cavity dissolution testing were developed. Unstimulated saliva (US) SSF and stimulated saliva (SS) SSF were separately developed since the two states significantly differ. Physicochemical properties including pH, buffer capacity, surface tension and viscosity were assessed during development and optimised to mimic human saliva (HS). In order to account for the salivary proteins in HS, use of bovine submaxillary mucin (BSM) and porcine gastric mucin (PGM) in SSFs was evaluated. Following optimisation of the SSFs, biorelevance of the developed SSFs to HS was assessed by their comparative physicochemical properties as well as dissolution profiles of three diverse model compounds (sildenafil citrate, efavirenz, and caffeine) which showed comparable profiles between the SSFs and HS. This work addresses the lack of uniformed biorelevant dissolution media for oral cavity dissolution studies and provides a basis for standardised dissolution tests that provide consistency and harmonisation in future oral cavity dissolution studies. We envisage that this will have a positive impact on the development of new medicines that require functionality in the oral cavity.

Oral care product formulations, properties and challenges

This review explores the physical, chemical and structural properties of key components of oral care products, whilst looking at the challenges which need to be overcome to continue to improve the efficacy of oral care, and improve dental health. Oral care has been an essential part of all populations and cultures around the world for thousands of years. To maintain good oral health, dental plaque causing bacteria and malodour must be controlled whilst also strengthening and protecting the teeth to prevent dental caries. Advanced modern formulations need to provide controlled and extended release of ingredients vital for dental health. With modern day products such as toothpastes and mouthwashes, it has never been easier to maintain good oral hygiene and health, yet the incidence of dental caries is still on the rise. The complex formulations of modern toothpastes and mouthwashes makes them one of the most sophisticated pharmaceutical products on the market today. The demands of the consumer coupled with the complexity of the oral cavity make it one of the most challenging development processes.

The Influence of pH Values on the Rheological, Textural and Release Properties of Carbomer Polacril® 40P-Based Dental Gel Formulation with Plant-Derived and Synthetic Active Components

The physicochemical properties, especially pH value of dental medicines, have significant influence on the health of oral cavity tissues. The pH of formulations should correspond to the value of saliva pH (5.5–8.0). For carbomer-based gels, the required pH value is obtained by neutralizing them with alkaline components, which leads to their structuring (thickening). This affects the physical properties of the gel, its residence time at the application site and the rate of release of active pharmaceutical ingredient. Therefore, the main purpose of this study is to evaluate the rheological, textural, and biopharmaceutical properties of Carbomer Polacril^® 40P-based dental gel depending on the pH value. Evaluation of the rheological properties of gel preparations were performed by measuring the structural viscosity of the samples as a function of pH and temperature. The textural properties of the gel were evaluated by performing tests regarding back extrusion and spreadability. Carbomer Polacril^® 40P-based gels haven’t shown noticeable thixotropic behavior, and were characterized by plastic flow in the whole studied pH range. The structural viscosity at the selected average pH value hasn’t differed at storage (25 °C) and application (37 °C) temperature. Texture studies of dental gels have shown a strong correlation with rheoparameters. Their rheological behavior and textural properties haven’t changed significantly between the pH range of 5.5–6.6. The relatively narrow range of working pH values does not affect the change in the viscosity of the preparation significantly and, consequently, does not affect the release of APIs from the developed Carbomer Polacril^® 40P-based dental gel.

Influence of Polyvinyl Alcohol (PVA) on PVA-Poly-N-hydroxyethyl-aspartamide (PVA-PHEA) Microcrystalline Solid Dispersion Films

This study was conducted to formulate buccal films consisting of polyvinyl alcohol (PVA) and poly-N-hydroxyethyl-aspartamide (PHEA), to improve the dissolution of the drug through the oral mucosa. Ibuprofen sodium salt was used as a model drug, and the buccal film was expected to enhance its dissolution rate. Two different concentrations of PVA (5% w/v and 7.5% w/v) were used. Solvent casting was used to prepare films, where a solution consisting of drug and polymer was cast and allowed to dry. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM) were used to investigate the properties of films. In vitro dissolution studies were also conducted to investigate drug release. SEM studies showed that films containing a higher concentration of PVA had larger particles in microrange. FTIR studies confirmed the presence of the drug in films and indicated that ibuprofen sodium did not react with polymers. DSC studies confirmed the crystalline form of ibuprofen sodium when incorporated within films. In vitro dissolution studies found that the dissolution percentage of ibuprofen sodium alone was increased when incorporated within the film from 59 to 74%. This study led to the development of solid microcrystalline dispersion as a buccal film with a faster dissolution rate than the drug alone overcoming problem of poor solubility.

Microneedles and Nanopatches-Based Delivery Devices in Dentistry

Needle-based devices are evolving as a promising diagnostic and therapeutic tool in the field of medicine. They can be used for drug delivery, as well as extraction of fluids, for systemic and local effects. The conventional methods of drug delivery require repeated dosing in the oral cavity due to the presence of saliva. Hence delivery systems, such as needle-based devices that could provide sustained release of the drug in the oral cavity, are required. These devices could also be a useful adjunct in diagnosis and therapy of oral cancers, delivering anti-cariogenic and antiplaque agents, for remote monitoring of oral health, and for administering painless and fearless local anesthesia. Since they offer many advantages, such as increased compliance, absence of needle phobia, they are painless, safe, self-applicable and are minimally invasive, they will have a major impact in the field of dentistry. This paper summarizes the various types of needle-based devices and their manufacturing technologies. The manuscript aims to serve as a foundational review that highlights and proposes several current and prospective impactful applications of these devices in various fields of dentistry.

Flash tooth whitening: A friendly formulation based on a nanoencapsulated reductant

Tooth whitening materials have not undergone relevant advances in the last years. Current materials base their action on the oxidant activity of peroxides, which present the disadvantage of requiring long application times, along with unpleasant side effects of dental hypersensitivity (e.g. sharp pain). In this work, a novel tooth whitening formulation based on the encapsulation of a reducing agent (sodium metabisulfite) in liposomes is developed. An experimental design was applied to optimize the formulation in terms of whitening action and safety, using bovine teeth as in vitro model. Results were obtained by colorimetry, profilometry and nanoindentation techniques. The comparison with standard whitening treatments showed a similar whitening action of the optimized formulation but in remarkable shorter application times. Moreover, teeth roughness values obtained with the presented formulation conformed with ISO 28399. As mechanism of action, results obtained from fluorescent confocal microscopy showed the liposomal formulation to form a layer surrounding the enamel surface, enhancing the treatment efficacy in terms of diffusion of the protected reductant towards the enamel. The better efficiency of this formulation encourages its use as an alternative to current oxidative treatments.

Mucoadhesive bilayered buccal platform for antifungal drug delivery into the oral cavity

A drug delivery technology comprising a mucoadhesive bilayered buccally anchored tablet containing natamycin was developed. The concept was to anchor the tablet to the buccal tissue and allow controlled release of the drug through the matrix into the mouth. Carbomer (Carbopol ® 974 P NF) was used to formulate the mucoadhesive layer. Hydroxypropyl methylcellulose (HPMC) (Methocel® K4M) at 10, 15, 20, and 40% w/w was used for the drug-containing layer. Natamycin, an amphoteric macrolide antifungal agent, was incorporated into the formulations. In addition, tablets containing erythrosine as a marker were prepared in order to examine the distribution and retention of the dye in the oral cavity. As expected, the in vitro analysis showed that the concentration of natamycin released decreased with the increasing proportion of HPMC in the formulation. A small volunteer study was conducted using the tablets containing 10% and 20% HPMC to quantitate the patterns of distribution of the drug released into the oral cavity (upper right buccal vestibule, lower right and left buccal vestibules, and sublingual region). The mucoadhesive bilayered buccal tablet formulation provided a unidirectional release of the drug from the tablet into the oral cavity in a prolonged release fashion, maintaining drug concentration above the MIC value (2 μg/mL) for Candida albicans. The amount of the drug in the sublingual region was found to be lowest when compared with other regions, which is due to the higher flow of saliva in this region. Graphical abstract.

Nanosilver Fluoride-A Paradigm Shift for Arrest in Dental Caries in Primary Teeth of Schoolchildren: A Randomized Controlled Clinical Trial

Background

Due to limited financial resources, poor access to basic oral care, and the high cost of restorative treatment, children of low-income nations have their general health, social well-being, and education opportunities affected by untreated dental caries. Arresting caries treatment (ACT) has been proposed to manage untreated dental caries in children of disadvantaged communities.

Aims and objectives

The purpose of the present controlled clinical trial is to investigate the effectiveness of a new anticaries agent, nanosilver fluoride (NSF), preventing and arresting caries in children.

Materials and methods

A total of 100 deciduous molars both maxillary and mandibular are randomly selected from 60 children of 4–9 years of age group, which were randomly divided into NSF experimental group and saline control group. Teeth were clinically diagnosed and treated by one masked examiner and followed up at 7 days, 5 months and 12 months by another calibrated examiner who was blinded to the type of treatment. The criteria of the ICDAS II were followed to determine the activity of lesion and the diagnosis of caries. The Pearson's Chi-square test was used to compare the groups during different follow-up examinations.

Results

Seventy-eight percent of decayed teeth showed hard arrested dentine at 7 days; after 5-month analysis in the NSF group, 72.91% of the teeth showed arrested caries; and in the control group, only 34% of teeth showed arrest of caries. At 12-month analysis in the NSF group, 65.21% of teeth showed arrested cavities, and in the control group, 28.88% of teeth showed arrest of caries.

Conclusion

The present study proves that NSF is an anticaries agent and presents a noninvasive option for caries arrest and treatment when applied directly to dentin caries lesions.

How to cite this article

Nagireddy VR, Reddy D, Kondamadugu S, et al. Nanosilver Fluoride—A Paradigm Shift for Arrest in Dental Caries in Primary Teeth of Schoolchildren: A Randomized Controlled Clinical Trial. Int J Clin Pediatr Dent 2019;12(6):484–490.

Drug Delivery Systems Based on Titania Nanotubes and Active Agents for Enhanced Osseointegration of Bone Implants

TiO2 nanotubes (TNTs) are attractive nanostructures for localized drug delivery. Owing to their excellent biocompatibility and physicochemical properties, numerous functionalizations of TNTs have been attempted for their use as therapeutic agent delivery platforms. In this review, we discuss the current advances in the applications of TNT-based delivery systems with an emphasis on the various functionalizations of TNTs for enhancing osteogenesis at the bone-implant interface and for preventing implant-related infection. Innovation of therapies for enhancing osteogenesis still represents a critical challenge in regeneration of bone defects. The overall concept focuses on the use of osteoconductive materials in combination with the use of osteoinductive or osteopromotive factors. In this context, we highlight the strategies for improving the functionality of TNTs, using five classes of bioactive agents: growth factors (GFs), statins, plant derived molecules, inorganic therapeutic ions/nanoparticles (NPs) and antimicrobial compounds.

Different Types of Gel Carriers as Metronidazole Delivery Systems to the Oral Mucosa

Periodontal diseases are some of the most widespread oral afflictions, and they are labeled as chronic infections caused by the accumulation of bacteria in dental plaque that produces localized inflammation of the periodontium. The use of local drug delivery systems to treat periodontal diseases has received greater attention, because the active substance is targeted directly to the affected area, which minimizes its systemic side effects. Therefore, the purpose of the investigation was to develop and characterize different types of gel formulations-bigel, hydrogel and oleogel-as local delivery systems containing metronidazole (MET), which can be applied to the oral mucosa. The influence of the formulation type on the mechanical, rheological and mucoadhesive properties were examined. Moreover, in vitro release of metronidazole, its ex vivo permeation through buccal porcine mucosa and antimicrobial activity measured by the plate diffusion method were estimated. It was found that the gel formulations obtained were non-Newtonian systems, showing a shear-thinning behavior and thixotropic properties with good textural features such as firmness, compressibility and adhesiveness. Moreover, the preparations designed possessed beneficial mucoadhesive properties. The formulated hydrogels and bigels containing micronized MET were considered as better formulations in terms of drug release and antimicrobial activity compared to commercially available metronidazole ointment. An ex vivo permeation study with the use of porcine buccal mucosa demonstrated that the bigel formulation was characterized by higher initial permeability rate providing a fast therapeutic effect with simultaneous moderate retention in mucosal tissue to decrease the risk of local cytotoxicity.

Emerging Applications of Drug Delivery Systems in Oral Infectious Diseases Prevention and Treatment

The oral cavity is a unique complex ecosystem colonized with huge numbers of microorganism species. Oral cavities are closely associated with oral health and sequentially with systemic health. Many factors might cause the shift of composition of oral microbiota, thus leading to the dysbiosis of oral micro-environment and oral infectious diseases. Local therapies and dental hygiene procedures are the main kinds of treatment. Currently, oral drug delivery systems (DDS) have drawn great attention, and are considered as important adjuvant therapy for oral infectious diseases. DDS are devices that could transport and release the therapeutic drugs or bioactive agents to a certain site and a certain rate in vivo. They could significantly increase the therapeutic effect and reduce the side effect compared with traditional medicine. In the review, emerging recent applications of DDS in the treatment for oral infectious diseases have been summarized, including dental caries, periodontitis, peri-implantitis and oral candidiasis. Furthermore, oral stimuli-responsive DDS, also known as "smart" DDS, have been reported recently, which could react to oral environment and provide more accurate drug delivery or release. In this article, oral smart DDS have also been reviewed. The limits have been discussed, and the research potential demonstrates good prospects.

Development and Characterization of Bioadhesive Film Embedded with Lignocaine and Calcium Fluoride Nanoparticles

The formation of biofilm by Streptococcus mutans on the tooth surface is the primary cause of dental caries and periodontal diseases, and fluoride (F) has shown tremendous potential as a therapeutic moiety against these problems. Herein, we report an efficient multi-ingredient bioadhesive film-based delivery system for oral cavity to combat dental problems with an ease of administration. Thiolated chitosan-based bioadhesive film loaded with calcium fluoride nanoparticles (CaF₂ NPs) and lignocaine as a continuous reservoir for prolonged delivery was successfully prepared and characterized. The polygonal CaF₂ NPs with an average particle size less than 100 nm, PDI 0.253, and + 6.10 mV zeta potential were synthesized and loaded in film. The energy dispersive x-ray (EDX) spectroscopy confirmed the presence 33.13% F content in CaF₂ NPs. The characterization of the three film trials for their mechanical strength, bioadhesion, drug release, and permeation enhancement suggested film B as better among the three trials and showed significant outcomes, indicating the potential application of the medicated bioadhesive film. In vitro dissolution studies revealed sustained release pattern of lignocaine and CaF₂ NP following Krosmeyer-Peppas model over 8 h. Franz diffusion studies showed the prolonged contact time of film with mucosa that facilitated the transport of CaF₂ NPs and lignocaine across the mucosa. Hence, the prepared bioadhesive film-based system showed good potential for better management of dental problems. Graphical Abstract.

Parenteral systems for statin delivery: a review

The oral route of drug administration is the most common and convenient route for dosing statin drugs, and, in fact, most medications, because of ease of drug delivery, patient compliance, and cost-effectiveness. However, the oral administration of statin drugs has disadvantages such as hepatic first-pass metabolism and degradation within the gastrointestinal tract that limit their overall bioavailability. This review introduces several diverse non-oral delivery methods for the administration of statins. These alternative delivery systems and routes of administration are varied and are capable of improving the bioavailability and therapeutic efficacy of statin drugs.

Wheat germ agglutinin liposomes with surface grafted cyclodextrins as bioadhesive dual-drug delivery nanocarriers to treat oral cells

Topical management of oral infection requires combined use of multiple classes of drugs and frequent dosing due to low drug retention rates. The sustained, co-delivery of drugs with different solubilities to cells using nanoparticle drug delivery systems remains a challenge. Here, we developed wheat germ agglutinin (WGA) conjugated liposomes with surface grafted cyclodextrin (WGA-liposome-CD) as bioadhesive dual-drug nanocarriers. We effectively encapsulated two physiochemically different drugs (ciprofloxacin and betamethasone) and demonstrated sustained co-drug release in saliva over a 24 h period in vitro. As proof of therapeutic utility in oral cells, we infected oral keratinocytes with Aggregatibacter actinomycetemcomitans, a bacterial pathogen responsible for chronic periodontal disease. Drug release, resulting from nanocarrier cell binding, produced a significant increase in oral cell survival and synergistically reduced inflammation. These results suggest that WGA-liposome-CD nanocarriers are novel cyto-adhesive candidates for delivering multiple drugs with sustained therapeutic activity for localized drug delivery to oral cells.