Biofilm formation by Shiga toxin-producing Escherichia coli O157:H7 and Non-O157 strains and their tolerance to sanitizers commonly used in the food processing environment

Emerging of Shiga toxin-producing Escherichia coli O177:H11 and O177:H25 from cattle at slaughter in Italy

Shiga toxin-producing Escherichia coli (STEC) are zoonotic pathogens frequently carried by cattle, responsible in humans of mild to bloody diarrhoea, haemolytic uraemic syndrome (HUS) and even death. In 2023-2024, a study on STEC contamination of hide and carcasses of dairy cattle at slaughter was planned in Emilia-Romagna region (northern Italy). When the study was still in progress and 60 animals were sampled, the detection of STEC O177 isolates reached high rates and gained our attention. A total of five O177 STEC strains were detected, namely four from three carcasses (5.0 %) and one from a hide sample (1.7 %). The isolates were typed by WGS as following: 1) STEC O177:H11 sequence type (ST) 765 (stx2a+, eae+), detected from one carcass; 2) STEC O177:H25 ST659 (stx2c+, eae+) detected from three carcasses and one hide sample. One carcass was contaminated by both STEC serotypes. The isolates carried other virulence determinants often found in STEC strains associated with HUS, namely the exha, astA and espP genes, together with genes for adhesion to the epithelial cells of the gut (lpfA, fdeC, fimH) and non-Locus for Enterocyte Effacement (LEE) effector protein genes (nleA, nleB). The STEC O177:H11 isolate harboured antimicrobial resistance (AMR) genes to β-lactams (blaTEM-1A), aminoglycosides (aadA1, aph(3″)-Ib, aph(6)-Id), trimethoprim (dfrA1), sulphonamides (sul1, sul2), tetracyclines (tetA), (tetB), streptothricin (sat2), and quaternary ammonium compounds (qacEdelta1). On the contrary, the STEC O177:H25 isolates carried no AMR genes. Persistent carriage of STEC O177:H25 ST659 (stx2c+, eae+) at farm level was assessed by testing animals of the same herd sent to slaughter. Interestingly, the colonies of STEC O177:H11 and STEC O177:H25 had different morphology on CHROMagar™ STEC plates, being mauve and colourless, respectively. Since mauve is the colour STEC colonies commonly have on the CHROMagar™ STEC medium, our findings can help microbiologists in the selection of uncommon serotypes. To the best of our knowledge, this is the first detection of STEC O177 from carcasses and hides of dairy cattle at slaughter. Noteworthy, the STEC-positive hide was classified as "very dirty" thus stressing the need of clean animals entering the slaughter chain, as required by Regulation (EC) No 853/2004. Since STEC O177 has been responsible of HUS in Europe, our data could add information on the source of uncommon serogroups in human infections.

Transcription levels of hes and their involvement in the biofilm formation of Shiga toxin-producing Escherichia coli O91

Shiga toxin-producing Escherichia coli (STEC) are recognized as being responsible for many cases of foodborne diseases worldwide. Cattle are the main reservoir of STEC, shedding the microorganisms in their feces. The serogroup STEC O91 has been associated with hemorrhagic colitis and hemolytic uremic syndrome. Locus of Adhesion and Autoaggregation (LAA) and its hes gene are related to the pathogenicity of STEC and the ability to form biofilms. Considering the frequent isolation of STEC O91, the biofilm-forming ability, and the possible role of hes in the pathogenicity of STEC, we propose to evaluate the ability of STEC to form biofilms and to evaluate the expression of hes before and after of biofilm formation. All strains were classified as strong biofilm-forming. The hes expression showed variability between strains before and after biofilm formation, and this may be due to other genes carried by each strain. This study is the first to report the relationship between biofilm formation, and hes expression and proposes that the analysis and diagnosis of LAA, especially hes as STEC O91 virulence factors, could elucidate these unknown mechanisms. Considering that there is no specific treatment for HUS, only supportive care, it is necessary to know the survival and virulence mechanisms of STEC O91.

Evaluating disinfectant efficacy on mixed biofilms comprising Shiga toxigenic Escherichia coli, lactic acid bacteria, and spoilage microorganisms

This study aimed to investigate the impact of temperature and the presence of other microorganisms on the susceptibility of STEC to biocides. Mature biofilms were formed at both 10°C and 25°C. An inoculum of planktonic bacteria comprising 106 CFU/mL of spoilage bacteria and 103 CFU/mL of a single E. coli strain (O157, O111, O103, and O12) was used to form mixed biofilms. The following bacterial combinations were tested: T1: Carnobacterium piscicola + Lactobacillus bulgaricus + STEC, T2: Comamonas koreensis + Raoultella terrigena + STEC, and T3: Pseudomonas aeruginosa + C. koreensis + STEC. Tested biocides included quaternary ammonium compounds (Quats), sodium hypochlorite (Shypo), sodium hydroxide (SHyd), hydrogen peroxide (HyP), and BioDestroy®-organic peroxyacetic acid (PAA). Biocides were applied to 6-day-old biofilms. Minimum Bactericidal Concentrations (MBC) and Biofilm Eradication Concentrations (BEC) were determined. Planktonic cells and single-species biofilms exhibited greater susceptibility to sanitizers (p < 0.0001). Lactobacillus and Carnobacterium were more susceptible than the rest of the tested bacteria (p < 0.0001). Single species biofilms formed by E. coli O111, O121, O157, and O45 showed resistance (100%) to Shypo sanitizer (200 ppm) at 25°C. From the most effective to the least effective, sanitizer performance on single-species biofilms was PAA > Quats > HyP > SHyd > Shypo. In multi-species biofilms, spoilage bacteria within T1, T2, and T3 biofilms showed elevated resistance to SHyd (30%), followed by quats (23.25%), HyP (15.41%), SHypo (9.70%), and BioDestroy® (3.42%; p < 0.0001). Within T1, T2, and T3, the combined STEC strains exhibited superior survival to Quats (23.91%), followed by HyP (19.57%), SHypo (18.12%), SHyd (16.67%), and BioDestroy® (4.35%; p < 0.0001). O157:H7-R508 strains were less tolerant to Quats and Shypo when combined with T2 and T3 (p < 0.0001). O157:H7 and O103:H2 strains in mixed biofilms T1, T2, and T3 exhibited higher biocide resistance than the weak biofilm former, O145:H2 (p < 0.0001). The study shows that STEC within multi-species biofilms' are more tolerant to disinfectants.

Polyphenols and CRISPR as Quorum Quenching Agents in Antibiotic-Resistant Foodborne Human Pathogens (Salmonella Typhimurium, Campylobacter jejuni and Escherichia coli 0157:H7)

Antibiotic resistance in foodborne pathogens is an increasing threat to global human health. Among the most prevalent antibiotic-resistant bacteria are Salmonella enterica serovar Typhimurium, Campylobacter jejuni and E. coli 0157:H7. Control of these and other pathogens requires innovative approaches, i.e., discovering new molecules that will inactivate them, or render them less virulent without inducing resistance. Recently, several polyphenol molecules have been shown to possess such characteristics. Also, the use of CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) approaches has recently been proposed for such purpose. This review summarizes the main findings regarding the application of both approaches to control the above-mentioned foodborne pathogens by relying on Quorum Sensing interference (Quorum Quenching) mechanisms and highlights the avenues needed for further research.

Polyphenols and CRISPR as Quorum Quenching Agents in Antibiotic-Resistant Foodborne Human Pathogens (Salmonella Typhimurium, Campylobacter jejuni and Escherichia coli 0157:H7)

Antibiotic resistance in foodborne pathogens is an increasing threat to global human health. Among the most prevalent antibiotic-resistant bacteria are Salmonella enterica serovar Typhimurium, Campylobacter jejuni and E. coli 0157:H7. Control of these and other pathogens requires innovative approaches, i.e., discovering new molecules that will inactivate them, or render them less virulent without inducing resistance. Recently, several polyphenol molecules have been shown to possess such characteristics. Also, the use of CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) approaches has recently been proposed for such purpose. This review summarizes the main findings regarding the application of both approaches to control the above-mentioned foodborne pathogens by relying on Quorum Sensing interference (Quorum Quenching) mechanisms and highlights the avenues needed for further research.

Effect of Bacteriophages against Biofilms of Escherichia coli on Food Processing Surfaces

The bacterial adhesion to food processing surfaces is a threat to human health, as these surfaces can serve as reservoirs of pathogenic bacteria. Escherichia coli is an easily biofilm-forming bacterium involved in surface contamination that can lead to the cross-contamination of food. Despite the application of disinfection protocols, contamination through food processing surfaces continues to occur. Hence, new, effective, and sustainable alternative approaches are needed. Bacteriophages (or simply phages), viruses that only infect bacteria, have proven to be effective in reducing biofilms. Here, phage phT4A was applied to prevent and reduce E. coli biofilm on plastic and stainless steel surfaces at 25 °C. The biofilm formation capacity of phage-resistant and sensitive bacteria, after treatment, was also evaluated. The inactivation effectiveness of phage phT4A was surface-dependent, showing higher inactivation on plastic surfaces. Maximum reductions in E. coli biofilm of 5.5 and 4.0 log colony-forming units (CFU)/cm2 after 6 h of incubation on plastic and stainless steel, respectively, were observed. In the prevention assays, phage prevented biofilm formation in 3.2 log CFU/cm2 after 12 h. Although the emergence of phage-resistant bacteria has been observed during phage treatment, phage-resistant bacteria had a lower biofilm formation capacity compared to phage-sensitive bacteria. Overall, the results suggest that phages may have applicability as surface disinfectants against pathogenic bacteria, but further studies are needed to validate these findings using phT4A under different environmental conditions and on different materials.

Driving forces shaping the microbial ecology in meat packing plants

Meat production is a complex system, continually receiving animals, water, air, and workers, all of which serve as carriers of bacteria. Selective pressures involved in different meat processing stages such as antimicrobial interventions and low temperatures, may promote the accumulation of certain residential microbiota in meat cutting facilities. Bacteria including human pathogens from all these sources can contaminate meat surfaces. While significant advancements have been made in enhancing hygienic standards and pathogen control measures in meat plants, resulting in a notable reduction in STEC recalls and clinical cases, STEC still stands as a predominant contributor to foodborne illnesses associated with beef and occasionally with pork. The second-and third-generation sequencing technology has become popular in microbiota related studies and provided a better image of the microbial community in the meat processing environments. In this article, we reviewed the potential factors influencing the microbial ecology in commercial meat processing facilities and conducted a meta-analysis on the microbiota data published in the last 10 years. In addition, the mechanisms by which bacteria persist in meat production environments have been discussed with a focus on the significant human pathogen E. coli O157:H7 and generic E. coli, an indicator often used for the hygienic condition in food production.

Phage Therapy Against Pathogenic Escherichia coli (O104:H4, O157:H7, and O26) Strains in Irrigation Water During Garden Cress (Lepidium sativum Linn.) Vegetation

Fresh produce outbreaks have increased worldwide. Foodborne pathogens are transmitted mostly by contaminated water, and elimination is harder after the transmission. To eliminate pathogens in fresh produce, chemical prevention methods, including chlorine, can be used. However, the usage of chemicals poses a risk to human health, as well as environmental health. Therefore, alternative prevention methods that can be applied in the field should be investigated. This study aims to investigate an alternative method to prevent the pathogenic Escherichia coli strain O26 and Shiga toxin-producing strains O104:H4 and O157:H7 on freshly consumed garden cresses. In this study, garden cresses were treated with bacteriophages after becoming contaminated with pathogenic E. coli strains during growth. After 30 days, the leaves were collected and tested for the presence of E. coli. Its adherence on the leaf surface was investigated with scanning electron microscope (SEM). Although there were significant reductions in both total and biofilm-forming E. coli counts in pathogenic E. coli strain O26 and Shiga toxin-producing strains O104:H4 and O157:H7, which is also confirmed with the SEM images, the counts were not lowered to levels permitted by the EU. Therefore, results showed that phage therapy against pathogenic E. coli strains may be used as a biocontrol agent in combination with additional control measure.

Comparative Transcriptome Analysis of Shiga Toxin-Producing Escherichia coli O157:H7 on Bovine Rectoanal Junction Cells and Human Colonic Epithelial Cells during Initial Adherence

Shiga toxin-producing Escherichia coli (STEC) are notorious foodborne pathogens, capable of causing severe diarrhea and life-threatening complications in humans. Cattle, acting as both primary reservoirs and asymptomatic carriers of STEC, predominantly harbor the pathogen in their rectoanal junction (RAJ), facilitating its transmission to humans through contaminated food sources. Despite the central role of cattle in STEC transmission, the molecular mechanisms governing STEC's adaptation in the RAJ of the asymptomatic reservoir host and its subsequent infection of human colonic epithelial cells, resulting in diarrhea, remain largely unexplored. This study aims to uncover these complicated dynamics by focusing on the STEC O157:H7 serotype within two distinct host environments, bovine RAJ cells and human colonic epithelial cells, during initial colonization. We employed comparative transcriptomics analysis to investigate differential gene expression profiles of STEC O157:H7 during interactions with these cell types. STEC O157:H7 was cultured either with bovine RAJ cells or the human colonic epithelial cell line CCD CoN 841 to simulate STEC-epithelial cell interactions within these two host species. High-throughput RNA sequencing revealed 829 and 1939 bacterial genes expressed in RAJ and CCD CoN 841, respectively. After gene filtering, 221 E. coli O157:H7 genes were upregulated during initial adherence to CCD CoN cells and 436 with RAJ cells. Furthermore, 22 genes were uniquely expressed with human cells and 155 genes with bovine cells. Our findings revealed distinct expression patterns of STEC O157:H7 genes involved in virulence, including adherence, metal iron homeostasis, and stress response during its initial adherence (i.e., six hours post-infection) to bovine RAJ cells, as opposed to human colonic epithelial cells. Additionally, the comparative analysis highlighted the potential role of some genes in host adaptation and tissue-specific pathogenicity. These findings shed new light on the potential mechanisms of STEC O157:H7 contributing to colonize the intestinal epithelium during the first six hours of infection, leading to survival and persistence in the bovine reservoir and causing disease in humans.

A novel method using a differential staining fluorescence microscopy (DSFM) to track the location of enteric pathogens within mixed-species biofilms

This study developed a new tool, differential staining fluorescence microscopy (DSFM), to measure the biovolume and track the location of enteric pathogens in mixed-species biofilms which can pose a risk to food safety in beef processing facilities. DSFM was employed to examine the impact of pathogenic bacteria, Escherichia coli O157:H7 and three different Salmonella enterica strains on mixed-species biofilms of beef processing facilities. Fourteen floor drain biofilm samples from three beef processing plants were incubated with overnight BacLight stained enteric pathogens at 7 °C for 5 days on stainless steel surface then counter-stained with FM-1-43 biofilm stain and analyzed using fluorescence microscopy. Notable variations in biovolume of biofilms were observed across the fourteen samples. The introduction of E. coli O157:H7 and S. enterica strains resulted in diverse alterations of biofilm biovolume, suggesting distinct impacts on mixed-species biofilms by different enteric pathogens which were revealed to be located in the upper layer of the mixed-species biofilms. Pathogen strain growth curve comparisons and verification of BacLight Red Stain staining effectiveness were validated. The findings of this study show that the DSFM method is a promising approach to studying the location of enteric pathogens within mixed-species biofilms recovered from processing facilities. Understanding how foodborne pathogens interact with biofilms will allow for improved targeted antimicrobial interventions.

Effectiveness of Bacteriophages against Biofilm-Forming Shiga-Toxigenic Escherichia coli In Vitro and on Food-Contact Surfaces

(1) Background: Formation of biofilms on food-contact surfaces by Shiga-toxigenic Escherichia coli (STEC) can pose a significant challenge to the food industry, making conventional control methods insufficient. Targeted use of bacteriophages to disrupt these biofilms could reduce this problem. Previously isolated and characterized bacteriophages (n = 52) were evaluated against STEC biofilms in vitro and on food-contact surfaces. (2) Methods: Phage treatments (9 logs PFU/mL) in phosphate-buffered saline were used individually or as cocktails. Biofilms of STEC (O157, O26, O45, O103, O111, O121, and O145) were formed in 96-well micro-titer plates (7 logs CFU/mL; 24 h) or on stainless steel (SS) and high-density polyethylene (HDPE) coupons (9 logs CFU/cm²; 7 h), followed by phage treatment. Biofilm disruption was measured in vitro at 0, 3, and 6 h as a change in optical density (A₅₉₅). Coupons were treated with STEC serotype-specific phage-cocktails or a 21-phage cocktail (3 phages/serotype) for 0, 3, 6, and 16 h, and surviving STEC populations were enumerated. (3) Results: Of the 52 phages, 77% showed STEC biofilm disruption in vitro. Serotype-specific phage treatments reduced pathogen population within the biofilms by 1.9-4.1 and 2.3-5.6 logs CFU/cm², while the 21-phage cocktail reduced it by 4.0 and 4.8 logs CFU/cm² on SS and HDPE, respectively. (4) Conclusions: Bacteriophages can be used to reduce STEC and their biofilms.

Bacteriophages for the Targeted Control of Foodborne Pathogens

Foodborne illness is exacerbated by novel and emerging pathotypes, persistent contamination, antimicrobial resistance, an ever-changing environment, and the complexity of food production systems. Sporadic and outbreak events of common foodborne pathogens like Shiga toxigenic E. coli (STEC), Salmonella, Campylobacter, and Listeria monocytogenes are increasingly identified. Methods of controlling human infections linked with food products are essential to improve food safety and public health and to avoid economic losses associated with contaminated food product recalls and litigations. Bacteriophages (phages) are an attractive additional weapon in the ongoing search for preventative measures to improve food safety and public health. However, like all other antimicrobial interventions that are being employed in food production systems, phages are not a panacea to all food safety challenges. Therefore, while phage-based biocontrol can be promising in combating foodborne pathogens, their antibacterial spectrum is generally narrower than most antibiotics. The emergence of phage-insensitive single-cell variants and the formulation of effective cocktails are some of the challenges faced by phage-based biocontrol methods. This review examines phage-based applications at critical control points in food production systems with an emphasis on when and where they can be successfully applied at production and processing levels. Shortcomings associated with phage-based control measures are outlined together with strategies that can be applied to improve phage utility for current and future applications in food safety.

Antibacterial and anti-biofilm properties of carvacrol alone and in combination with cefixime against Escherichia coli

BACKGROUND

Plant-derived compounds can be used as antimicrobial agents in medicines and as food preservatives. These compounds can be applied along with other antimicrobial agents to strengthen the effect and/or reduce the required treatment dose.

RESULTS

In the present study, the antibacterial, anti-biofilm and quorum sensing inhibitory activity of carvacrol alone and in combination with the antibiotic cefixime against Escherichia coli was investigated. The MIC and MBC values for carvacrol were 250 μg/mL. In the checkerboard test, carvacrol showed a synergistic interaction with cefixime against E. coli (FIC index = 0.5). Carvacrol and cefixime significantly inhibited biofilm formation at MIC/2 (125 and 62.5 μg/mL), MIC/4 (62.5 and 31.25 μg/mL) and MIC/8 (31.25 and 15.625 μg/mL) for carvacrol and cefixime, respectively. The antibacterial and anti-biofilm potential effect of carvacrol confirmed by the scanning electron microscopy. Real-time quantitative reverse transcription PCR revealed significant down-regulation of the luxS and pfs genes following treatment with a MIC/2 (125 μg/mL) concentration of carvacrol alone and of only pfs gene following treatment with MIC/2 of carvacrol in combination with MIC/2 of cefixime (p < 0.05).

CONCLUSIONS

Because of the significant antibacterial and anti-biofilm activity of carvacrol, the present study examines this agent as an antibacterial drug of natural origin. The results indicate that in this study the best antibacterial and anti-biofilm properties are for the combined use of cefixime and carvacrol.

Microbial Dynamics in Mixed-Culture Biofilms of Salmonella Typhimurium and Escherichia coli O157:H7 and Bacteria Surviving Sanitation of Conveyor Belts of Meat Processing Plants

Biofilm formation can lead to the persistence of Salmonella Typhimurium (ST) and E. coli O157:H7 (O157). This study investigated the impact of meat processing surface bacteria (MPB) on biofilm formation by O157 (non-biofilm former; NF) and ST (strong biofilm former; BF). MPB were recovered from the contacting surfaces (CS), non-contacting surfaces (NCS), and roller surfaces (RS) of a beef plant conveyor belt after sanitation. O157 and ST were co-inoculated with MPB (CO), or after a delay of 48 h (IS), into biofilm reactors containing stainless steel coupons and incubated at 15 °C for up to 144 h. Coupons were withdrawn at various intervals and analyzed by conventional plating and 16S rRNA gene amplicon sequencing. The total bacterial counts in biofilms reached approximately 6.5 log CFU/cm², regardless of MPB type or development mode. The mean counts for O157 and ST under equivalent conditions mostly did not differ (p > 0.05), except for the IS set at 50 h, where no O157 was recovered. O157 and ST were 1.6 ± 2.1% and 4.7 ± 5.0% (CO) and 1.1 ± 2.2% and 2.0 ± 2.8% (IS) of the final population. Pseudomonas dominated the MPB inocula and biofilms, regardless of MPB type or development mode. Whether or not a pathogen is deemed BF or NF in monoculture, its successful integration into complex multi-species biofilms ultimately depends on the presence of certain other residents within the biofilm.

[Shiga toxin producing Escherichia coli: the challenge of adherence to survive]

Shiga Toxin-producing Escherichia coli (STEC) is recognized as being responsible for a large number of foodborne illnesses around the world. The pathogenicity of STEC has been related to Stx toxins. However, the ability of STEC to colonize the host and other surfaces can be essential for developing its pathogenicity. Different virulence profiles detected in STEC could cause the emergence of strains carrying new genes codified in new pathogenicity islands linked to metabolism and adherence. Biofilm formation is a spontaneous mechanism whereby STEC strains resist in a hostile environment being able to survive and consequently infect the host through contaminated food and food contact surfaces. Biofilm formation shows intra-and inter-serotype variability, and its formation does not depend only on the microorganisms involved. Other factors related to the environment (such as pH, temperature) and the surface (stainless steel and polystyrene) influence biofilm expression. The «One Health» concept implies the interrelation between public, animal, and environmental health actors to ensure food safety, prevent cross-contamination and resistance to sanitizers, highlighting the need to identify emerging pathogens through new molecular markers of rapid detection that involve STEC strains carrying the Locus of Enterocyte Effacement or Locus of Adhesion and Autoaggregation.

Composite Coating for the Food Industry Based on Fluoroplast and ZnO-NPs: Physical and Chemical Properties, Antibacterial and Antibiofilm Activity, Cytotoxicity

Bacterial contamination of meat products during its preparation at the enterprise is an important problem for the global food industry. Cutting boards are one of the main sources of infection. In order to solve this problem, the creation of mechanically stable coatings with antibacterial activity is one of the most promising strategies. For such a coating, we developed a composite material based on "liquid" Teflon and zinc oxide nanoparticles (ZnO-NPs). The nanoparticles obtained with laser ablation had a rod-like morphology, an average size of ~60 nm, and a ζ-potential of +30 mV. The polymer composite material was obtained by adding the ZnO-NPs to the polymer matrix at a concentration of 0.001-0.1% using the low-temperature technology developed by the research team. When applying a composite material to a surface with damage, the elimination of defects on a micrometer scale was observed. The effect of the composite material on the generation of reactive oxygen species (H₂O₂, •OH), 8-oxoguanine in DNA in vitro, and long-lived reactive protein species (LRPS) was evaluated. The composite coating increased the generation of all of the studied compounds by 50-200%. The effect depended on the concentration of added ZnO-NPs. The antibacterial and antibiofilm effects of the Teflon/ZnO NP coating against L. monocytogenes, S. aureus, P. aeruginosa, and S. typhimurium, as well as cytotoxicity against the primary culture of mouse fibroblasts, were studied. The conducted microbiological study showed that the fluoroplast/ZnO-NPs coating has a strong bacteriostatic effect against both Gram-positive and Gram-negative bacteria. In addition, the fluoroplast/ZnO-NPs composite material only showed potential cytotoxicity against primary mammalian cell culture at a concentration of 0.1%. Thus, a composite material has been obtained, the use of which may be promising for the creation of antibacterial coatings in the meat processing industry.

Biofilms as a microbial hazard in the food industry: A scoping review

Biofilms pose a serious public health hazard with a significant economic impact on the food industry. The present scoping review is designed to analyze the literature published during 2001-2020 on biofilm formation of microbes, their detection methods, and association with antimicrobial resistance (if any). The peer-reviewed articles retrieved from 04 electronic databases were assessed using PRISMA-ScR guidelines. From the 978 preliminary search results, a total of 88 publications were included in the study. On analysis, the commonly isolated pathogens were Listeria monocytogenes, Staphylococcus aureus, Salmonella spp., Escherichia coli, Bacillus spp., Vibrio spp., Campylobacter jejuni and Clostridium perfringens. The biofilm-forming ability of microbes was found to be influenced by various factors such as attachment surfaces, temperature, presence of other species, nutrient availability etc. A total of 18 studies characterized the biofilm-forming genes, particularly for S. aureus, Salmonella spp., and E. coli. In most studies, polystyrene plate and/or stainless-steel coupons were used for biofilm formation, and the detection was carried out by crystal violet assays and/or by plate counting method. The strain-specific significant differences in biofilm formation were observed in many studies, and few studies carried out analysis of multi-species biofilms. The association between biofilm formation and antimicrobial resistance wasn't clearly defined. Further, viable but non-culturable (VBNC) form of the foodborne pathogens is posing an unseen (by conventional cultivation techniques) but potent threat food safety. The present review recommends the need for carrying out systematic surveys and risk analysis of biofilms in food chain to highlight the evidence-based public health concerns, especially in regions where microbiological food hazards are quite prevalent.

Formation and Transfer of Multi-Species Biofilms Containing E. coli O103:H2 on Food Contact Surfaces to Beef

Interactions of Shiga toxin–producing E. coli (STEC; O103:H2) with lactic acid bacteria (LAB) or spoilage bacteria (SP) multispecies biofilms on polyurethane (TPU) and stainless-steel (SS) were assessed at 10 and 25°C under wet and dry conditions after 6, 30, and 60 days of storage. One LAB T1: Carnobacterium piscicola + Lactobacillus bulgaricus, and two SP T2: Comamonas koreensis + Raoultella terrigena; T3: Pseudomonas aeruginosa + C. koreensis were assessed for their ability to form multispecies biofilms with O103:H2. O103:H2 single-species biofilms served as a control positive (T4). Coupons were stored dry (20–50% relative humidity; RH) or moist (60–90% RH) for up to 60 days, at which point O103:H2 transfer to beef and survival was evaluated. At 25°C, T3 decreased beef contamination with O103:H2 by 2.54 log₁₀ CFU/g (P < 0.001). Overall, at 25°C contamination of beef with O103:H2 decreased (P < 0.001) from 3.17 log₁₀ CFU/g on Day 6 to 0.62 log₁₀ CFU/g on Day 60. With 60 days dry biofilms on TPU, an antagonistic interaction was observed among O103:H2 and multispecies biofilm T1 and T3. E. coli O103:H2 was not recovered from T1 and T3 after 60 days but it was recovered (33%) from T2 and T4 dry biofilms. At 10°C, contamination of beef with O103:H2 decreased (P < 0.001) from 1.38 log₁₀ CFU/g after 6 days to 0.47 log₁₀ CFU/g after 60 days. At 10°C, recovery of O103:H2 from 60 days dry biofilms could only be detected after enrichment and was always higher for T2 than T4 biofilms. Regardless of temperature, the transfer of O103:H2 to beef from the biofilm on TPU was greater (P < 0.001) than SS. Moist biofilms also resulted in greater (P < 0.001) cell transfer to beef than dry biofilms at 10 and 25°C. Development of SP or LAB multispecies biofilms with O103:H2 can either increase or diminish the likelihood of beef contamination. Environmental conditions such as humidity, contact surface type, as well as biofilm aging all can influence the risk of beef being contaminated by STEC within multi-species biofilms attached to food contact surfaces.

Evaluation of Salmonella Biofilm Cell Transfer from Common Food Contact Surfaces to Beef Products

ABSTRACT

Meat contamination by Salmonella enterica is a serious public health concern. Available data have suggested that biofilm formation at processing plants and contaminated contact surfaces might contribute to meat contamination. Because transfer from contact surfaces to food products via direct contact has been deemed the most common bacteria transmission route that can lead to contamination, we evaluated the effect of Salmonella biofilm forming ability, contact surface material, and beef surface tissue type on Salmonella biofilm transfer from hard surfaces to beef products. Salmonella biofilms developed on the common contact surfaces stainless steel (SS) and polyvinylchloride (PVC) were transferred consecutively via 30 s of direct contact to either lean muscle or adipose tissue surfaces of 15 pieces of beef trim. The Salmonella biofilm cells could be effectively transferred multiple times from the contact surfaces to the beef trim as indicated by quantifiable Salmonella cells on most meat samples. Biofilm forming ability had the most significant impact (P < 0.05) on transfer efficiency. More cells of Salmonella strains that formed strong biofilms were transferred after each contact and contaminated more meat samples with quantifiable cells compared with strains that formed weak biofilms. Contact surface materials also affected transferability. Salmonella biofilms on SS transferred more efficiently than did those on PVC. In contrast, the two types of meat surface tissues were not significantly different (P > 0.05) in biofilm transfer efficiency. Beef trim samples that were in contact with biofilms but did not have quantifiable Salmonella cells were positive for Salmonella after enrichment culture. Our results indicate the high potential of Salmonella biofilms on common contact surfaces in meat processing plants to cause product cross-contamination.

HIGHLIGHTS

Inhibitory effect of modified atmosphere packaging on Escherichia coli O157:H7 in fresh-cut cucumbers (Cucumis sativus L.) and effectively maintain quality during storage

Modified atmosphere packaging (MAP) can inhibit microbial growth and prolong shelf life of fresh-cut cucumbers. This study compared the effects of different packaging gases on the growth of E. coli O157:H7 and sensory characteristics of fresh-cut cucumbers. Changes in key movement, adhesion, and oxidative stress genes expression of strain under optimal MAP and air were determined. Cell population density, the extracellular carbohydrate complex content and expression of curli fimbriae were evaluated. Results revealed that the growth of E. coli O157:H7 in fresh-cut cucumbers could be effectively inhibited under MAP (atmosphere = 2% O₂, 7% CO₂, 91% N₂), and better maintained the sensory characteristics. Furthermore, the inhibition mechanism was revealed by inhibiting the expression of movement (fliC), adhesion (eaeA) and oxidative stress (rpoS and sodB) genes in E. coli O157:H7, reducing biofilm formation, extracellular carbohydrate production and curli fimbriae expression. Proper MAP can maintain the quality and safety of fresh-cut cucumbers.

The Use of Ozone as an Eco-Friendly Strategy against Microbial Biofilm in Dairy Manufacturing Plants: A Review

Managing spoilage and pathogenic bacteria contaminations represents a major challenge for the food industry, especially for the dairy sector. Biofilms formed by these microorganisms in food processing environment continue to pose concerns to food manufacturers as they may impact both the safety and quality of processed foods. Bacteria inside biofilm can survive in harsh environmental conditions and represent a source of repeated food contamination in dairy manufacturing plants. Among the novel approaches proposed to control biofilm in food processing plants, the ozone treatment, in aqueous or gaseous form, may represent one of the most promising techniques due to its antimicrobial action and low environmental impact. The antimicrobial effectiveness of ozone has been well documented on a wide variety of microorganisms in planktonic forms, whereas little data on the efficacy of ozone treatment against microbial biofilms are available. In addition, ozone is recognized as an eco-friendly technology since it does not leave harmful residuals in food products or on contact surfaces. Thus, this review intends to present an overview of the current state of knowledge on the possible use of ozone as an antimicrobial agent against the most common spoilage and pathogenic microorganisms, usually organized in biofilm, in dairy manufacturing plants.

Resistance of biofilm- and pellicle-embedded strains of Escherichia coli encoding the transmissible locus of stress tolerance (tLST) to oxidative sanitation chemicals

Biofilm formation in food processing plants reduces the efficacy of sanitation. The presence of transmissible locus of stress tolerance (tLST) also enhances resistance of planktonic cells of Escherichia coli to sanitation chemicals but the role of tLST in resistance of biofilm-embedded cells remains unclear. This study investigated the link of tLST to biofilm formation and its contribution to resistance of biofilm-embedded E. coli to sanitation. Biofilms were formed as single-strain and as dual-strain biofilms in association with E. coli, Aeromonas australensis or Carnobacterium maltaromaticum. Biofilms on stainless steel were compared to floating biofilms formed at the air-liquid interface (pellicles). The resistance of biofilm-embedded tLST positive strains of E. coli to chlorine, hydrogen peroxide, and peroxyacetic acid was higher than the resistance of tLST negative strains. Higher biofilm density as measured by crystal violet staining was observed in tLST-positive strains of E. coli when compared to tLST negative strains. Biofilm density positively correlated to resistance to disinfectants. The use of confocal laser scanning microscopy detected more compact structure of pellicles compared to solid surface-attached biofilms, resulting in higher chlorine resistance despite the absence of tLST in strains of E. coli. Collectively, the findings of this study elucidated the impact of tLST in strains of E. coli on biofilm formation and sanitizer resistance. These findings may inform the development of improved sanitization protocols for food facilities.

Biofilm formation by Non-O157 Shiga toxin-producing Escherichia coli in monocultures and co-cultures with meat processing surface bacteria

This study investigated the impact of meat processing surface bacteria (MPB) on biofilm formation by non-O157 Shiga toxin-producing Escherichia coli (STEC), and potential links between biofilm formation by STEC and biofilm-related genes in their genomes. Biofilm development by 50 MPB and 6 STEC strains in mono- and co-cultures was assessed by the crystal violet staining method, and their expression of curli and cellulose was determined using the Congo red agar method. Genes (n = 141) associated with biofilm formation in the STEC strains were profiled. Biofilm formation in general correlated with cellulose and curli expression in both mono- and co-cultures. Most MPB strains had antagonistic effects on the biofilm formation of the STEC strains. Of the genes investigated, 81% were common among the STEC strains and there seems to be a gene-redundancy in biofilm formation. The inability of the O26 strain to form biofilms could be due to mutations in the rpoS gene. Truncation in the mlrA gene in the O145 strain seems not affecting its biofilm formation alone or with MPB. The O45 strain, despite having the greatest number of biofilm-related genes, did not form measurable biofilms. Overall, biofilm formation of STEC was affected by curli-cellulose expression and companion strains.

Application of Bacteriophages on Shiga Toxin-Producing Escherichia coli (STEC) Biofilm

Shiga toxin-producing Escherichia coli are pathogenic bacteria able to form biofilms both on abiotic surfaces and on food, thus increasing risks for food consumers. Moreover, biofilms are difficult to remove and more resistant to antimicrobial agents compared to planktonic cells. Bacteriophages, natural predators of bacteria, can be used as an alternative to prevent biofilm formation or to remove pre-formed biofilm. In this work, four STEC able to produce biofilm were selected among 31 different strains and tested against single bacteriophages and two-phage cocktails. Results showed that our phages were able to reduce biofilm formation by 43.46% both when used as single phage preparation and as a cocktail formulation. Since one of the two cocktails had a slightly better performance, it was used to remove pre-existing biofilms. In this case, the phages were unable to destroy the biofilms and reduce the number of bacterial cells. Our data confirm that preventing biofilm formation in a food plant is better than trying to remove a preformed biofilm and the continuous presence of bacteriophages in the process environment could reduce the number of bacteria able to form biofilms and therefore improve the food safety.

Emergent Biological Endurance Depends on Extracellular Matrix Composition of Three-Dimensionally Printed Escherichia coli Biofilms

Biofilms are three-dimensional (3D) bacterial communities that exhibit a highly self-organized nature in terms of their composition and complex architecture. Bacteria in biofilms display emergent biological properties, such as resistance to antimicrobials and disinfectants that the individual planktonic cells lack. Bacterial biofilms possess specialized architectural features including unique extracellular matrix compositions and a distinct spatially patterned arrangement of cells and matrix components within the biofilm. It is unclear which of these architectural elements of bacterial biofilms lead to the development of their emergent biological properties. Here, we report a 3D printing-based technique for studying the emergent resistance behaviors of Escherichia coli biofilms as a function of their architecture. Cellulose and curli are the major extracellular-matrix components in E. coli biofilms. We show that 3D-printed biofilms expressing either curli alone or both curli and cellulose in their extracellular matrices show higher resistance to exposure against disinfectants than 3D prints expressing either cellulose alone or no biofilm-matrix components. The 3D-printed biofilms expressing cellulose and/or curli also show thicker anaerobic zones than nonbiofilm-forming E. coli 3D prints. Thus, the matrix composition plays a crucial role in the emergent spatial patterning and biological endurance of 3D-printed biofilms. In contrast, initial spatial distribution of bacterial density or curli-producing cells does not have an effect on biofilm resistance phenotypes. Further, these 3D-printed biofilms could be reversibly attached to different surfaces (bacterial cellulose, glass, and polystyrene) and display resistance to physical distortions by retaining their shape and structure. This physical robustness highlights their potential in applications including bioremediation, protective coatings against pathogens on medical devices, or wastewater treatment, among many others. This new understanding of the emergent behavior of bacterial biofilms could aid in the development of novel engineered living materials using synthetic biology and materials science approaches.

Lactic Acid and Peroxyacetic Acid Inhibit Biofilm of Escherichia coli O157:H7 Formed in Beef Extract

The objective of this study was to evaluate the inhibitory effect of lactic acid (LA) and peroxyacetic acid (PAA) on the biofilm formation of Escherichia coli O157:H7 in beef extract (BE). BE medium was used as the growth substrate in this study, to make the control effect closer to the situation of the factory. The biofilm inhibitory efficacy of LA and PAA was tested by using a crystal violet staining assay and microscopic examination. And then, extracellular polymeric substance (EPS) production, metabolic activity, and real-time polymerase chain reaction assay were used to reveal the biofilm inhibition mechanism of LA and PAA. The results showed that both LA and PAA significantly inhibited biofilm formation of E. coli O157:H7 at minimum inhibitory concentrations (MICs) (p < 0.05). At MIC, LA and PAA showed different effects on the biofilm metabolic activity and the EPS production of E. coli O157:H7. Supporting these findings, expression analysis showed that LA significantly suppressed quorum sensing genes (luxS and sdiA) and adhesion genes (flhC), while PAA downregulated the transcription of extracellular polysaccharide synthesis genes (adrB and adrA) and the global regulatory factor csgD. This result revealed that LA and PAA had different biofilm inhibitory mechanisms on E. coli O157:H7; LA inhibited the biofilm formation mainly by inhibiting metabolic activity, while PAA inhibited EPS production. This study provided a theoretical basis for the control of E. coli O157:H7 biofilm in the actual production process.

Beef-Based Medium Influences Biofilm Formation of Escherichia coli O157:H7 Isolated from Beef Processing Plants

ABSTRACT

Beef-based medium beef extract (BE) and standard medium tryptic soy broth (TSB) are used as minimally processed food models to study the effects on Escherichia coli O157:H7 biofilm formation. The effects of temperatures (4, 10, 25, 37, and 42°C), pH values (4.5, 5.0, 5.5, 6.0, 7.0, and 8.0), strain characteristics, and the expression of functional genes on the biofilm formation ability of the bacteria were determined. The three tested E. coli O157:H7 strains produced biofilm in both media. Biofilm formation was greater in BE than in TSB (P < 0.05). The strongest biofilm formation capacity of E. coli O157:H7 was achieved at 37°C and pH 7.0. Biofilm formation was significantly inhibited for three tested strains incubated at 4°C. Biofilm formation ability was correlated with swarming in TSB. Biofilm formation was significantly and positively correlated with autoaggregation or hydrophobicity in BE (P < 0.05). At the initial stage of biofilm formation, the expressions of luxS, sdiA, csgD, csgA, flhC, adrA, and rpoS were significantly higher in BE than in TSB (P < 0.05). At the maturity stage, the expressions of luxS, sdiA, csgD, csgA, flhC, csrA, adrB, adrA, iraM, and rpoS were significantly higher in TSB than in BE (P < 0.05). Such information could help in the development of effective biofilm removal technologies to deal with risks of E. coli O157:H7 biofilms in the beef industry.

HIGHLIGHTS

Biofilm formation by LEE-negative Shiga Toxin-Producing Escherichia coli strains

Shiga toxin-producing Escherichia coli (STEC) include several serotypes isolated from cases of hemorrhagic colitis and, hemolytic uremic syndrome. Although O157:H7 is the most predominant STEC serotype, more than 100 non-O157 serogroups cause diseases in humans. Some STEC carry a Locus of Enterocyte Effacement (LEE-positive); however, STEC that do not carry LEE (LEE-negative) have also been associated with illness, mainly those harbouring the Locus of Adhesion and Autoaggregation (LAA). LAA carry some genes such as hes, iha, tpsA, and agn43, related with pathogenicity. One of them is the ability to form biofilms on different environments, which can contaminate food and generate infections while protecting themselves against adverse conditions. Considering that LAA could be responsible for some adherence mechanisms, the aims of this study were to compare different serogroup of LEE-negative STEC strains in their ability to form biofilms and to evaluate the participation of some genes encoding in LAA. A total of 348 LEE-negative STEC strains was analyzed. The presence of hes, iha, tpsA and agn43 were determined by monoplex PCR. From them, 48 STEC strains belonging to serogroups O113, O130, O171, O174 and, O178 were assayed for their ability to form biofilm. The most prevalent genes detected were agn43 (72.1%) and tpsA (69.5%). The iha and hes genes were present in 63.7% and 54% of the strains, respectively. Although all STEC strains were able to form biofilm, it was found a high variability between them. The relation between the biofilm formation and the presence of each gene was not statistically significant, suggesting that biofilm formation is independent of the presence of those genes. Highlighting that there is no treatment for HUS, it is once again notable that prevention measures and control strategies to prevent biofilm formation are important factors in reducing STEC transmission.

Eugenol, citral, and hexanal, alone or in combination with heat, affect viability, biofilm formation, and swarming on Shiga-toxin-producing Escherichia coli

Shiga-toxin-producing Escherichia coli strains are pathogenic for humans and cause mild to severe illnesses. In this study, the antimicrobial effect of citral, eugenol, and hexanal in combination with heat shock (HS) was evaluated in terms of the growth, biofilm formation, swarming, and expression of virulence genes of STEC serotypes (O157:H7, O103, O111, and O26). Eugenol was the most effective compound against the growth of E. coli strains (MBC = 0.58 to 0.73 mg/mL), followed by citral (MBC = 0.86 to 1.26 mg/mL) and hexanal (MBC = 2.24 to 2.52 mg/mL). Biofilm formation and swarming motility have great variability between STEC strains. Natural compounds-alone or combined with HS-inhibited biofilm formation; however, swarming motility was induced by most treatments. The expression of the studied genes during biofilm formation and swarming under natural antimicrobials was affected but not in a uniform pattern. These treatments could be used to control contamination of STEC and inhibit biofilm formation.

Escherichia coli O15 : H7 from Food of Animal Origin in Arsi: Occurrence at Catering Establishments and Antimicrobial Susceptibility Profile

Escherichia coli O157 : H7 (E. coli O157 : H7) has been found to be the major cause of food-borne diseases and a serious public health problem in the world, with an increasing concern for the emergence and spread of antimicrobial-resistant strains. Hitherto, little is known about the carriage of E. coli O157 : H7 and its antimicrobial susceptibility profile in the food of animal origin in Ethiopia. This study aimed to determine the occurrence and multidrug resistance profile of E. coli O157 : H7 from food of animal origin at different catering establishments in the selected study settings of Arsi Zone. One hundred ninety-two animal origin food items, namely, raw/minced meat (locally known as “Kitfo,” “Kurt,” and “Dulet”), raw milk, egg sandwich, and cream cake samples were collected and processed for microbiological detection of E. coli O157 : H7. Out of 192 samples, 2.1% (4/192) were positive for E. coli O157 : H7. Two E. coli O157 : H7 isolates were obtained from “Dulet” (6.3%) followed by “Kurt” (3.1%, 1/32) and raw milk (3.1%, 1/32), whereas no isolate was obtained from “Kitfo,” egg sandwich, and cream cake samples. Of the 4 E. coli O157 : H7 isolates subjected to 10 panels of antimicrobial discs, 3 (75%) were highly resistant to kanamycin, streptomycin, and nitrofurantoin. Besides, all the isolates displayed multidrug resistance phenotypes, 3 to 5 antimicrobial resistance, amid kanamycin, streptomycin, nitrofurantoin, tetracycline, and chloramphenicol. The occurrence of multidrug-resistant E. coli O157 : H7 isolates from foods of animal origin sampled from different catering establishments reveals that the general sanitary condition of the catering establishments, utensils used, and personnel hygienic practices did not comply with the recommended standards. Thus, this finding calls for urgent attention toward appropriate controls and good hygienic practices in different catering establishments dealing with consuming raw/undercooked foods of animal origin.

Shiga toxin-producing Escherichia coli isolated from pasteurized dairy products from Bahia, Brazil

The presence of pathogenic Shiga toxin-producing Escherichia coli (STEC) in dairy products represents a public health concern because of its ability to produce the toxins Stx1 and Stx2, which cause intestinal diseases. Monitoring the stages of milk production and checking dairy products for contamination are crucial steps to ensure dairy safety. This study aimed to report the occurrence of thermotolerant coliforms, E. coli, and STEC strains in pasteurized dairy products and to evaluate the antibiotic resistance profiles, serotypes, and characterizations of the STEC isolates by pulsed-field gel electrophoresis. We obtained a total of 138 pasteurized dairy products from 15 processing plants in Bahia, Brazil, to examine coliforms, E. coli, and STEC strains. We found that 43% of samples (59/138) contained thermotolerant coliforms, and 30% (42/138) did not comply with Brazilian regulations. Overall, 6% (9/138) were positive for E. coli and 4% (5/138) were positive for STEC. We recovered 9 STEC isolates from pasteurized cream (2/9), Minas Padrão cheese (2/9), Minas Frescal cheese (4/9), and ricotta (1/9). All isolates were stx2-positive, and 2 were eae-positive. All isolates were negative for the "big 6" STEC serogroups, belonging instead to serotypes ONT:HNT, ONT:H12, O148:H-, OR:H40, OR:HNT, and O148:HNT. Pulsed-field gel electrophoresis revealed 100% genetic similarity among 3 isolates from 2 different samples produced in the same production facility, which may suggest cross-contamination. As well, we found isolates that were 98% similar but in samples produced in different production facilities, suggesting a mutual source of contamination or a circulating strain. Two STEC strains exhibited resistance to streptomycin. Although the isolates presented a low resistance profile and no strain belonged to the "big 6" pathogenic group, the circulation of stx2-positive STEC strains in ready-to-eat products highlights the importance of epidemiological surveillance inside the Brazilian dairy chain.

Elucidating the Role of Virulence Traits in the Survival of Pathogenic E. coli PI-7 Following Disinfection

Reuse and discharge of treated wastewater can result in dissemination of microorganisms into the environment. Deployment of disinfection strategies is typically proposed as a last stage remediation effort to further inactivate viable microorganisms. In this study, we hypothesize that virulence traits, including biofilm formation, motility, siderophore, and curli production along with the capability to internalize into mammalian cells play a role in survival against disinfectants. Pathogenic E. coli PI-7 strain was used as a model bacterium that was exposed to diverse disinfection strategies such as chlorination, UV and solar irradiation. To this end, we used a random transposon mutagenesis library screening approach to generate 14 mutants that exhibited varying levels of virulence traits. In these 14 isolated mutants, we observed that an increase in virulence traits such as biofilm formation, motility, curli production, and internalization capability, increased the inactivation half-lives of mutants compared to wild-type E. coli PI-7. In addition, oxidative stress response and EPS production contributed to lengthening the lag phase duration (defined as the time required for exposure to disinfectant prior to decay). However, traits related to siderophore production did not help with survival against the tested disinfection strategies. Taken together, the findings suggested that selected virulence traits facilitate survival of pathogenic E. coli PI-7, which in turn could account for the selective enrichment of pathogens over the non-pathogenic ones after wastewater treatment. Further, the study also reflected on the effectiveness of UV as a more viable disinfection strategy for inactivation of pathogens.

Impact of mixed biofilm formation with environmental microorganisms on E. coli O157:H7 survival against sanitization

Biofilm formation by foodborne pathogens is a serious threat to food safety and public health. Meat processing plants may harbor various microorganisms and occasional foodborne pathogens; thus, the environmental microbial community might impact pathogen survival via mixed biofilm formation. We collected floor drain samples from two beef plants with different E. coli O157:H7 prevalence history and investigated the effects of the environmental microorganisms on pathogen sanitizer tolerance. The results showed that biofilm forming ability and bacterial species composition varied considerably based on the plants and drain locations. E. coli O157:H7 cells obtained significantly higher sanitizer tolerance in mixed biofilms by samples from the plant with recurrent E. coli O157:H7 prevalence than those mixed with samples from the other plant. The mixed biofilm that best protected E. coli O157:H7 also had the highest species diversity. The percentages of the species were altered significantly after sanitization, suggesting that the community composition affects the role and tolerance level of each individual species. Therefore, the unique environmental microbial community, their ability to form biofilms on contact surfaces and the interspecies interactions all play roles in E. coli O157:H7 persistence by either enhancing or reducing pathogen survival within the biofilm community.

Genetic and Phenotypic Factors Associated with Persistent Shedding of Shiga Toxin-Producing Escherichia coli by Beef Cattle

Shiga toxin-producing Escherichia coli (STEC) is a leading cause of foodborne infections. Cattle are an important STEC reservoir, although little is known about specific pathogen traits that impact persistence in the farm environment. Hence, we sought to evaluate STEC isolates recovered from beef cattle in a single herd in Michigan. To do this, we collected fecal grabs from 26 cattle and resampled 13 of these animals at 3 additional visits over a 3-month period. In all, 66 STEC isolates were recovered for genomics and biofilm quantification using crystal violet assays. The STEC population was diverse, representing seven serotypes, including O157:H7, O26:H11, and O103:H2, which are commonly associated with human infections. Although a core genome analysis of 2,933 genes grouped isolates into clusters based on serogroups, some isolates within each cluster had variable biofilm levels and virulence gene profiles. Most (77.8%; n = 49) isolates harbored stx _2a, while 38 (57.5%) isolates formed strong biofilms. Isolates belonging to the predominant serogroup O6 (n = 36; 54.5%) were more likely to form strong biofilms, persistently colonize multiple cattle, and be acquired over time. A high-quality single nucleotide polymorphism (SNP) analysis of 33 O6 isolates detected between 0 and 13 single nucleotide polymorphism (SNP) differences between strains, indicating that highly similar strain types were persisting in this herd. Similar findings were observed for other persistent serogroups, although key genes were found to differ among strong and weak biofilm producers. Together, these data highlight the diversity and persistent nature of some STEC types in this important food animal reservoir.IMPORTANCE Food animal reservoirs contribute to Shiga toxin-producing Escherichia coli (STEC) evolution via the acquisition of horizontally acquired elements like Shiga toxin bacteriophages that enhance pathogenicity. In cattle, persistent fecal shedding of STEC contributes to contamination of beef and dairy products and to crops being exposed to contaminated water systems. Hence, identifying factors important for STEC persistence is critical. This longitudinal study enhances our understanding of the genetic diversity of STEC types circulating in a cattle herd and identifies genotypic and phenotypic traits associated with persistence. Key findings demonstrate that multiple STEC types readily persist in and are transmitted across cattle in a shared environment. These dynamics also enhance the persistence of virulence genes that can be transferred between bacterial hosts, resulting in the emergence of novel STEC strain types. Understanding how pathogens persist and diversify in reservoirs is important for guiding new preharvest prevention strategies aimed at reducing foodborne transmission to humans.

Optical nanosensors for biofilm detection in the food industry: principles, applications and challenges

Biofilms are the universal lifestyle of bacteria enclosed in extracellular polymeric substances (EPS) on the contact surfaces of food processing facilities. The EPS-encapsulated foodborne bacterial pathogens are the main food contaminant sources, posing a serious threat to human health. The microcrystalline, sophisticated and dynamic biofilms necessitate the development of conventional microscopic imaging and spectral technology. Nanosensors, which can transfer the biochemical information into optical signals, have recently emerged for biofilm optical detection with high sensitivity and high spatial resolution at nanoscale scopes. Therefore, the aim of this review is to clarify the main detection scope in biofilms and the detection principles of optical nanosensors arousing Raman enhancement, fluoresce conversion and color change. The difficulties and challenges of biofilm characterization including the secretion and variation of main biochemical components are first discussed, the details about the principles and application examples of bioassays targeting foodborne pathogens based on optical nanosensors are then summarized. Finally, the challenges and future trends in developing optical nanosensors are also highlighted. The current review indicates that optical nanosensors have taken the challenges of detecting biofilm in complex food samples, including the characterization of biofilm formation mechanism, identification of microbial metabolic activities, diagnosis of potential food pathogens and sanitation monitoring of food processing equipment. Numerous in-depth explorations and various trials have proven that the bioassays based on multifunctional optical nanosensors are promising to ensure and promote food safety and quality. However, there still remains a daunting challenge to structure reproducible, biocompatible and applicable nano-sensors for biofilm characterization, identification, and imaging.

Bacteriophage biocontrol of Shiga toxigenic Escherichia coli (STEC) O145 biofilms on stainless steel reduces the contamination of beef

Shiga toxigenic Escherichia coli (STEC) can form biofilms and frequently cause serious foodborne illnesses. A strain of STEC O145:H25 (EC19990166) known to be a strong biofilm former was used to evaluate the efficacy of bacteriophage AZO145A against biofilms formed on stainless steel (SS) coupons. Exposure of STEC O145:H25 to phage AZO145A (10¹⁰ PFU/mL) for 2 h resulted in a 4.0 log₁₀ reduction (P < 0.01) of planktonic cells grown in M9 broth at 24 °C for 24 h, while reductions were 2.0 log₁₀ CFU/mL if these cells were grown for 48 h or 72 h prior to phage treatment. STEC O145 biofilms formed on SS coupons for 24, 48 and 72 h were reduced (P < 0.01) 2.9, 1.9 and 1.9 log₁₀ CFU/coupon by phages. STEC O145 cells in biofilms were readily transferred from the surface of the SS coupon to beef (3.6 log₁₀ CFU/coupon) even with as little as 10 s of contact with the meat surface. However, transfer of STEC O145 cells from biofilms that formed on SS coupons for 48 h to beef was reduced (P < 0.01) by 3.1 log₁₀ CFU by phage (2 × 10¹⁰ PFU/mL) at 24 °C. Scanning electron microscopy revealed that bacterial cells within indentations on the surface of SS coupons were reduced by phage. These results suggest that bacteriophage AZO145A could be effective in reducing the viability of biofilm-adherent STEC O145 on stainless steel in food industry environments.

An epifluorescence-based technique accelerates risk assessment of aggregated bacterial communities in carcass and environment

The severe and pervasive effects of multispecies foodborne microbial biofilms highlight the importance of rapid detection and diagnosis of contamination risk in the field using epifluorescence-based techniques (EBT) combined with automatic image-counting software. This study screened the hygiene quality of the environment, the carcass and the slaughtering equipment in the El-Kharga abattoir, New Valley Province, Egypt, to assess possible contamination during slaughter process. In addition, biofilm was assessed, and bacteria was enumerated by epifluorescence microscopy. Using both conventional and EBT, the highest bacterial counts were observed for the slaughtering equipment (6.6 and 5.2 cfu/cm2, respectively), followed by different parts of the carcass (4.1 and 4.4 cfu/cm2, respectively) and environmental samples (3.9 and 4.1 cfu/cm2, respectively). A high prevalence of E. coli O157:H7 was observed on the slaughtering equipment (25%), which also led to carcass (1%) contamination. Moreover, Enterobacteriaceae members were detected during examination, such as Klebsiella pneumoniae, Enterobacter aerogenes, and Raoultella ornithinolytica. Despite the relatively good hygiene quality of the abattoir environment, there is also a high risk associated with biofilm formation by pathogenic microorganisms on the slaughtering equipment. Moreover, EBT showed different structures of the biofilm, including those formed at different maturation stages, such as voids, microbubbles, channels and mushroom shapes. (EBT) microscopy combined with image-counting software could be a candidate substitute to estimate efficiently, precisely and rapidly the microbial aggregation and exposure risk in field than the conventional counting techniques.

Effectiveness and Functional Mechanism of a Multicomponent Sanitizer against Biofilms Formed by Escherichia coli O157:H7 and Five Salmonella Serotypes Prevalent in the Meat Industry

ABSTRACT

Biofilm formation by Escherichia coli O157:H7 and Salmonella enterica at meat processing plants poses a potential risk of meat product contamination. Many common sanitizers are unable to completely eradicate biofilms formed by these foodborne pathogens because of the three-dimensional biofilm structure and the presence of bacterial extracellular polymeric substances (EPSs). A novel multifaceted approach combining multiple chemical reagents with various functional mechanisms was used to enhance the effectiveness of biofilm control. We tested a multicomponent sanitizer consisting of a quaternary ammonium compound (QAC), hydrogen peroxide, and the accelerator diacetin for its effectiveness in inactivating and removing Escherichia coli O157:H7 and Salmonella enterica biofilms under meat processing conditions. E. coli O157:H7 and Salmonella biofilms on common contact surfaces were treated with 10, 20, or 100% concentrations of the multicomponent sanitizer solution for 10 min, 1 h, or 6 h, and log reductions in biofilm mass were measured. Scanning electron microscopy (SEM) was used to directly observe the effect of sanitizer treatment on biofilm removal and bacterial morphology. After treatment with the multicomponent sanitizer, viable E. coli O157:H7 and Salmonella biofilm cells were below the limit of detection, and the prevalence of both pathogens was low. After treatment with a QAC-based control sanitizer, surviving bacterial cells were countable, and pathogen prevalence was higher. SEM analysis of water-treated control samples revealed the three-dimensional biofilm structure with a strong EPS matrix connecting bacteria and the contact surface. Treatment with 20% multicomponent sanitizer for 10 min significantly reduced biofilm mass and weakened the EPS connection. The majority of the bacterial cells had altered morphology and compromised membrane integrity. Treatment with 100% multicomponent sanitizer for 10 min dissolved the EPS matrix, and no intact biofilm structure was observed; instead, scattered clusters of bacterial aggregates were detected, indicating the loss of cell viability and biofilm removal. These results indicate that the multicomponent sanitizer is effective, even after short exposure with dilute concentrations, against E. coli O157:H7 and S. enterica biofilms.

HIGHLIGHTS

Biofilm formation by South African non-O157 Shiga toxigenic Escherichia coli on stainless steel coupons

This study examined the biofilm-forming ability of six non-O157 Shiga-toxin-producing Escherichia coli (STEC) strains: O116:H21, wzx-Onovel5:H19, O129:H21, O129:H23, O26:H11, and O154:H10 on stainless steel coupons after 24, 48, and 72 h of incubation at 22 °C and after 168 h at 10 °C. The results of crystal violet staining revealed that strains O129:H23 and O154:H10 were able to form biofilms on both the submerged surface and the air-liquid interface of coupons, whereas strains O116:H21, wzx-Onovel5:H19, O129:H21, and O26:H11 formed biofilm only at the air-liquid interface. Viable cell counts and scanning electron microscopy showed that biofilm formation increased (p < 0.05) over time. The biofilm-forming ability of non-O157 STEC was strongest (p < 0.05) at 22 °C after 48 h of incubation. The strongest biofilm former regardless of temperature was O129:H23. Generally, at 10 °C, weak to no biofilm was observed for isolates O154:H10, O116:H21, wzx-Onovel5:H19, O26:H11, and O129:H21 after 168 h. This study found that temperature affected the biofilm-forming ability of non-O157 STEC strains. Overall, our data indicate a high potential for biofilm formation by the isolates at 22 °C, suggesting that non-O157 STEC strains could colonize stainless steel within food-processing facilities. This could serve as a potential source of adulteration and promote the dissemination of these potential pathogens in food.

Effects of Beef Juice on Biofilm Formation by Shiga Toxin-Producing Escherichia coli on Stainless Steel

Shiga toxin-producing Escherichia coli (STEC) are a leading cause of foodborne illnesses worldwide, with beef and beef products as a common food reservoir. STEC strains may be present in beef-processing environments in the form of biofilms. The exudate of raw beef, also referred to as beef juice, has been identified as an important source of bacterial contamination on food-processing surfaces. This study applied beef juice as a food-based model to study its effects on biofilm formation of six STEC isolates on stainless steel. Crystal violet staining and cell enumeration demonstrated that beef juice inhibited the biofilm formation of strains O113, O145, and O91 up to 24 h at 22°C, but that biofilm increased (p < 0.05) thereafter over 72 h. Biofilms formed by O157, O111, and O45 were not affected by the addition of beef juice over the whole incubation period. Electron microscopy showed that the morphology of biofilm cells was altered and more extracellular matrix was produced with beef juice than with M9 medium. The present study demonstrated that beef juice residues on stainless steel can enhance biofilm formation of some STEC strains. Thorough and frequent cleaning of meat residues and exudate during meat production and handling is critical to reduce STEC biofilm formation even at 13°C.

Escherichia coli and Salmonella Enteritidis dual-species biofilms: interspecies interactions and antibiofilm efficacy of phages

Escherichia coli and Salmonella Enteritidis are foodborne pathogens forming challenging biofilms that contribute to their virulence, antimicrobial resistance, and survival on surfaces. Interspecies interactions occur between species in mixed biofilms promoting different outcomes to each species. Here we describe the interactions between E. coli and S. Enteritidis strains, and their control using specific phages. Single-species biofilms presented more cells compared to dual-species biofilms. The spatial organization of strains, observed by confocal microscopy, revealed similar arrangements in both single- and dual-species biofilms. The EPS matrix composition, assessed by Fourier-transform infrared spectroscopy, disclosed that the spectra extracted from the different dual-species biofilms can either be a combination of both species EPS matrix components or that the EPS matrix of one species predominates. Phages damaged more the single-species biofilms than the mixed biofilms, showing also that the killing efficacy was greatly dependent on the phage growth characteristics, bacterial growth parameters, and bacterial spatial distribution in biofilms. This combination of methodologies provides new knowledge of species-species and phage-host interactions in biofilms of these two major foodborne pathogens.

The Role of Pathogenic E. coli in Fresh Vegetables: Behavior, Contamination Factors, and Preventive Measures

Many raw vegetables, such as tomato, chili, onion, lettuce, arugula, spinach, and cilantro, are incorporated into fresh dishes including ready-to-eat salads and sauces. The consumption of these foods confers a high nutritional value to the human diet. However, the number of foodborne outbreaks associated with fresh produce has been increasing, with Escherichia coli being the most common pathogen associated with them. In humans, pathogenic E. coli strains cause diarrhea, hemorrhagic colitis, hemolytic uremic syndrome, and other indications. Vegetables can be contaminated with E. coli at any point from pre- to postharvest. This bacterium is able to survive in many environmental conditions due to a variety of mechanisms, such as adhesion to surfaces and internalization in fresh products, thereby limiting the usefulness of conventional processing and chemical sanitizing methods used by the food industry. The aim of this review is to provide a general description of the behavior and importance of pathogenic E. coli in ready-to-eat vegetable dishes. This information can contribute to the development of effective control measures for enhancing food safety.

Inactivation of Staphylococcus aureus Biofilms on Food Contact Surfaces by Superheated Steam Treatment

The objective of this study was to compare the inactivation efficacy of saturated steam (SS) and superheated steam (SHS) on Staphylococcus aureus biofilms on food contact surfaces, including type 304 stainless steel coupons with No. 4 finish (STS No. 4), type 304 stainless steel coupons with 2B finish (STS 2B), high-density polyethylene (HDPE), and polypropylene (PP). In addition, the effects of the surface characteristics on the inactivation efficacy were evaluated. Biofilms were formed on each food contact coupon surface using a three-strain cocktail of S. aureus. Five-day-old biofilms on STS No. 4, STS 2B, HDPE, and PP coupons were treated with SS at 100°C and SHS at 125 and 150°C for 2, 4, 7, 10, 15, and 20 s. Among all coupon types, SHS was more effective than SS in inactivating the S. aureus biofilms. S. aureus biofilms on steel coupons were more susceptible to most SS and SHS treatments than the biofilms on plastic coupons. S. aureus biofilms on HDPE and PP coupons were reduced by 4.00 and 5.22 log CFU per coupon, respectively, after SS treatment (100°C) for 20 s. SS treatment for 20 s reduced the amount of S. aureus biofilm on STS No. 4 and STS 2B coupons to below the detection limit. With SHS treatment (150°C), S. aureus biofilms on HDPE and PP needed 15 s to be inactivated to below the detection limit, while steel coupons only needed 10 s. The results of this study suggest that SHS treatment has potential as a biofilm control intervention for the food industry.

Facultative Anaerobes Shape Multispecies Biofilms Composed of Meat Processing Surface Bacteria and Escherichia coli O157:H7 or Salmonella enterica Serovar Typhimurium

This study investigated the microbial dynamics in multispecies biofilms of Escherichia coli O157:H7 strain 1934 (O157) or Salmonella enterica serovar Typhimurium ATCC 14028 (ST) and 40 strains of meat processing surface bacteria (MPB). Biofilms of O157 or ST with/without MPB were developed on stainless steel coupons at 15°C for up to 6 days. Bacteria in suspensions (inoculum, days 2 and 6) and biofilms (days 2 and 6) were enumerated by plating. The composition of multispecies cultures was determined by 16S rRNA gene sequencing. In suspensions, levels of O157 and ST were ∼2 log higher in single-species than in multispecies cultures on both sampling days. ST was 3 log higher in single-species than in multispecies biofilms. A similar trend, though to a lesser extent, was observed for O157 in biofilms on day 2 but not on day 6. No difference (P > 0.05) in bacterial counts was noted for the two MPB-pathogen cocultures at any time during incubation. Bacterial diversity in multispecies cultures decreased with incubation time, irrespective of the pathogen or culture type. The changes in the relative abundance of MPB were similar for the two MPB-pathogen cocultures, though different interbacterial interactions were noted. Respective fractions of ST and O157 were 2.1% and 0.97% initially and then 0.10% and 0.07% on day 2, and 0.60% and 0.04% on day 6. The relative proportions of facultative anaerobes in both multispecies cultures were greater in both suspensions and biofilms than in the inoculum. Citrobacter, Hafnia, Aeromonas, and Carnobacterium predominated in biofilms but not always in the planktonic cultures.IMPORTANCE Results of this study demonstrate that Salmonella enterica serovar Typhimurium and E. coli O157:H7 can integrate into biofilms when cocultured with bacteria from meat plant processing surfaces. However, the degree of biofilm formation for both pathogens was substantially reduced in the presence of the competing microbiota, with S. Typhimurium more greatly affected than E. coli O157:H7. The expression of extracellular determinants such as curli and cellulose appears to be less important for biofilm formation of the pathogens in multispecies cultures than in monoculture. In contrast to previous reports regarding food processing surface bacteria, data collected here also demonstrate that facultative anaerobes may have a competitive edge over strict aerobes in establishing multispecies biofilms. It would be important to take into account the presence of background bacteria when evaluating the potential persistence of a pathogen in food processing facilities.

Dynamics of Biofilm Formation by Salmonella Typhimurium and Beef Processing Plant Bacteria in Mono- and Dual-Species Cultures

This study aimed to determine the impact of bacteria from a beef plant conveyor belt on the biofilm formation of Salmonella in dual-species cultures. Beef plant isolates (50) including 18 Gram-negative aerobes (GNA), 8 Gram-positive aerobes (GPA), 5 lactic acid bacteria (LAB), 9 Enterobacteriaceae (EB), and 10 generic Escherichia coli (GEC) were included for developing biofilms in mono- and co-culture with S. Typhimurium at 15 °C for 6 days. Five selected cultures in planktonic form and in biofilms were tested for susceptibility to two commonly used sanitizers (i.e. E-San and Perox-E Plus). In mono-cultures, ≥ 80, 67, 61, 20, and 13% of GEC, EB, GNA, LAB, and GPA, respectively, developed measurable biofilms after 2 days, while all co-culture pairings with S. Typhimurium achieved some level of biofilm production. The predominant effect of EB and only effect of GEC strains on the biofilm formation of S. Typhimurium was antagonistic, while that of Gram-positive bacteria was synergistic, with the effect being more prominent on day 6. The effect was highly variable for the GNA isolates. Six aerobic isolates that formed moderate/strong biofilms by day 2 greatly boosted the co-culture biofilm formation. Seven Gram-negative bacteria were antagonistic against the biofilm formation of the co-cultures. Both sanitizers completely inactivated the selected planktonic cultures, but were largely ineffective against biofilms. In conclusion, all beef plant isolates assessed formed biofilms when paired with S. Typhimurium. Aerobic biofilm formers may create a more favorable condition for Salmonella biofilm formation, while some beef plant isolates have potential as a biocontrol strategy for Salmonella biofilms.