Lipid-Based Gels for Delivery of 3-O-Ethyl L-Ascorbic acid in Topical Applications

This study explores the incorporation of 10% 3-O-ethyl L-ascorbic acid (ETVC), a derivative of vitamin C, into two lipid gel systems: a hydrogel (HG) consisting exclusively of lipids and water and a bigel (BG) combining the hydrogel with an oleogel made from olive oil and beeswax. We investigated the ETVC release profiles from both materials using synthetic membranes and measured their permeation through porcine skin in vitro. Additionally, the interaction of these lipid gel systems with the stratum corneum (SC) was determined. Results from the release study indicate that the BG exhibited slower ETVC release compared to the HG. The permeation experiments showed that the presence of lipids in the formulations enhanced ETVC retention in the skin. The HG delivered a higher amount to the SC, while the BG achieved greater retention in the epidermis. This difference is attributed to the different lipophilic nature of each material. The structural analysis of SC lipids revealed that the organization of surface lipids remained unaltered by the application of the gels. Finally, an in vitro efficacy test in porcine skin using methylene blue indicated that our ETVC gels exhibited antioxidant activity. These findings provide valuable insights into the potential of lipid-based gels for topical applications.

Critical Review of Food Colloidal Delivery System for Bioactive Compounds: Physical Characterization and Application

Bioactive compounds (BACs) have attracted much attention due to their potential health benefits. However, such substances have problems such as difficulty dissolving in water, poor stability, and low intestinal absorption, leading to serious limitations in practical applications. Nowadays, food colloidal delivery carriers have become a highly promising solution due to their safety, controllability, and efficiency. The use of natural macromolecules to construct delivery carriers can not only regulate the solubility, stability, and intestinal absorption of BACs but also effectively enhance the nutritional added value of functional foods, improve sensory properties, and extend shelf life. Moreover, smart-responsive colloidal delivery carriers can control the release characteristics of BACs, thus improving their absorption rate in the human body. This review describes the characteristics of several typical food colloid delivery carriers, focuses on their physical properties from static structure to dynamic release, summarizes their applications in delivery systems, and provides an outlook on the future development of food colloid delivery carriers. The different compositions and structures of food colloids tend to affect their stability and release behaviors, and the different surface properties and rheological characteristics of the carriers predestine their different application scenarios. The control of in vivo release properties and the effect on food media should be emphasized in the future exploration of safer and more controllable carrier systems.

Characteristics of a Lipid Hydrogel and Bigel as Matrices for Ascorbic Acid Stabilization

Ascorbic acid (AA) has many health benefits, including immune and cardiovascular deficiency protection, prenatal problems, and skin diseases. Unfortunately, AA is easily oxidized and has limited bioavailability. Thus, the development of formulations that stabilize and enhance the efficacy of AA is a challenge. In this study, 4% AA was encapsulated in two recently developed gels, a hydrogel and a bigel. The hydrogel was formed exclusively with lipids and water, and the bigel was a combination of the hydrogel with an oleogel formed with olive oil and beeswax. The effect of AA in gel microstructures was determined using X-ray scattering, rheology, and texture analysis. Additionally, the capacity of these materials to protect AA from degradation upon temperature and sunlight was studied. Results showed that the incorporation of AA into both materials did not affect their microstructure. Moreover, hydrogel-protected AA showed only 2% degradation after three months at 8 °C, while in aqueous solution, it degraded by 12%. Regarding sunlight, bigel showed a good shielding effect, exhibiting only 2% AA degradation after 22 h of exposure, whereas in aqueous solution, AA degraded by 10%. These results suggest that both proposed gels could be used in biomedical applications and the field of food.

Laponite Composites: In Situ Films Forming as a Possible Healing Agent

A healing material must have desirable characteristics such as maintaining a physiological environment, protective barrier-forming abilities, exudate absorption, easy handling, and non-toxicity. Laponite is a synthetic clay with properties such as swelling, physical crosslinking, rheological stability, and drug entrapment, making it an interesting alternative for developing new dressings. This study evaluated its performance in lecithin/gelatin composites (LGL) as well as with the addition of maltodextrin/sodium ascorbate mixture (LGL MAS). These materials were applied as nanoparticles, dispersed, and prepared by using the gelatin desolvation method-eventually being turned into films via the solvent-casting method. Both types of composites were also studied as dispersions and films. Dynamic Light Scattering (DLS) and rheological techniques were used to characterize the dispersions, while the films' mechanical properties and drug release were determined. Laponite in an amount of 8.8 mg developed the optimal composites, reducing the particulate size and avoiding the agglomeration by its physical crosslinker and amphoteric properties. On the films, it enhanced the swelling and provided stability below 50 °C. Moreover, the study of drug release in maltodextrin and sodium ascorbate from LGL MAS was fitted to first-order and Korsmeyer-Peppas models, respectively. The aforementioned systems represent an interesting, innovative, and promising alternative in the field of healing materials.

Modeling, optimization and efficient use of MMT K10 nanoclay for Pb (II) removal using RSM, ANN and GA

Regarding the long-term toxic effects of Pb (II) ions on human health and its bioaccumulation property, taking measures for its reduction in the environment is necessary. The MMT-K₁₀ (montmorillonite-k₁₀) nanoclay was characterized by XRD, XRF, BET, FESEM, and FTIR. The effects of pH, initial concentrations, reaction time, and adsorbent dosage were studied. The experimental design study was carried out with RSM-BBD method. Results prediction and optimization were investigated with RSM and artificial neural network (ANN)-genetic algorithm (GA) respectively. The RSM results showed that the experimental data followed the quadratic model with the highest regression coefficient value (R² = 0.9903) and insignificant lack of fit (0.2426) showing the validity of the Quadratic model. The optimal adsorption conditions were obtained at pH 5.44, adsorbent = 0.98 g/l, concentration of Pb (II) ions = 25 mg/L, and reaction time = 68 min. Similar optimization results were observed by RSM and artificial neural network-genetic algorithm methods. The experimental data revealed that the process followed the Langmuir isotherm and the maximum adsorption capacity was 40.86 mg/g. Besides, the kinetic data indicated that the results fitted with the pseudo-second-order model. Hence, the MMT-K₁₀ nanoclay can be a suitable adsorbent due to having a natural source, simple and inexpensive preparation, and high adsorption capacity.

Melanin Treatment Effect of Vacuoles-Zinc Oxide Nanoparticles Combined with Ascorbic Acid

Currently, ascorbic acid (AA) is widely used as a skin whitening material, but, AA, an unstable hydrophilic molecule, cannot penetrate the skin easily, due to the hydrophobic character of the stratum corneum. Therefore, we conjugated AA with hydrated zinc oxide-an inorganic matrix with positive surface charge, to improve the stability of AA. The metal-conjugated-ascorbic acid (ZnAA) was then combined with yeast vacuole through the vacuolar membrane proteins that relate to metal transportation to create an enhanced vacuole that contained ZnAA. The characteristics of vacuole with ZnAA (ZnAA_Vac) were next examined by various tests that included X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Field emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray (EDX) analysis. Furthermore, the ability of ZnAA_Vac to degrade melanin was confirmed in both melanoma cell line B16F10, and the artificial human skin MelanoDerm. The results showed that ZnAA_Vac possessed a higher depigmenting effect than the wild-type vacuole or ascorbic acid by reducing 75% of melanin color. Interestingly, ZnAA_Vac was found to be harmless, and did not cause any cytotoxicity to the cells. Overall, ZnAA_Vac is expected to provide a robust, harmless, and effective whitening agent for the skin.

Detachable dissolvable microneedles: intra-epidermal and intradermal diffusion, effect on skin surface, and application in hyperpigmentation treatment

Delivering bioactive compounds into skin tissue has long been a challenge. Using ex vivo porcine and rat skins, here we demonstrate that a detachable dissolvable microneedle (DDMN) array, a special dissolvable microneedle that allows needle detachment from the base within 2 min post administration, can effectively embed a model compound into epidermis and dermis. Diffusion of the compound from the needle embedding sites to the nearby skin tissue is demonstrated at various post administration periods. The relationship between the time that a conventional dissolvable microneedle array is left on skin without needle detachment from the base and the degree of skin surface abrasion at each microneedle penetration spot is also demonstrated on skin of human volunteers. Co-loading glutathione with vitamin C (vitC) can stabilize vitC in the DDMN. DDMN loaded with vitC and glutathione can help erasing post-acne-hyperpigmentation spots.

Methods to Determine Chain-Breaking Antioxidant Activity of Nanomaterials beyond DPPH•. A Review

This review highlights the progress made in recent years in understanding the mechanism of action of nanomaterials with antioxidant activity and in the chemical methods used to evaluate their activity. Nanomaterials represent one of the most recent frontiers in the research for improved antioxidants, but further development is hampered by a poor characterization of the ''antioxidant activity'' property and by using oversimplified chemical methods. Inhibited autoxidation experiments provide valuable information about the interaction with the most important radicals involved in the lipid oxidation, namely alkylperoxyl and hydroperoxyl radicals, and demonstrate unambiguously the ability to stop the oxidation of organic materials. It is proposed that autoxidation methods should always complement (and possibly replace) the use of assays based on the quenching of stable radicals (such as DPPH• and ABTS•+). The mechanisms leading to the inhibition of the autoxidation (sacrificial and catalytic radical trapping antioxidant activity) are described in the context of nanoantioxidants. Guidelines for the selection of the appropriate testing conditions and of meaningful kinetic analysis are also given.

Biocompatible Hydrotalcite Nanohybrids for Medical Functions

Biocompatible hydrotalcite nanohybrids, i.e., layered double hydroxide (LDH) based nanohybrids have attracted significant attention for biomedical functions. Benefiting from good biocompatibility, tailored drug incorporation, high drug loading capacity, targeted cellular delivery and natural pH-responsive biodegradability, hydrotalcite nanohybrids have shown great potential in drug/gene delivery, cancer therapy and bio-imaging. This review aims to summarize recent progress of hydrotalcite nanohybrids, including the history of the hydrotalcite-like compounds for application in the medical field, synthesis, functionalization, physicochemical properties, cytotoxicity, cellular uptake mechanism, as well as their related applications in biomedicine. The potential and challenges will also be discussed for further development of LDHs both as drug delivery carriers and diagnostic agents.

Microencapsulation of retinyl palmitate by melt dispersion for cosmetic application

Retinyl palmitate was encapsulated in wax matrix by melt dispersion for the purpose of economic and sustainable cosmeceutical formulation with minimum use of synthetic chemicals. We evaluated the effect of different process variables of microencapsulation by melt dispersion. In this study, a three level definitive screening design was applied, where the microcapsule properties were analysed through statistical analysis to understand the effect of four process variables: type of wax, theoretical loading capacity, surface concentration and stirring speed. Microparticles were characterised for size using image analysis; loading capacity and encapsulation efficiency using ultraviolet-visible spectroscopy; antioxidant activity through DPPH (2,2-diphenyl-1-picrylhydrazyl) assay. Melt dispersion method was effective to produce microcapsules with a spherical shape and mean size as small as 28 µm. The encapsulation efficiency ranged 60-80%. Theoretical loading capacity (p-value = 0.00232, significance level, α = 1%) and surfactant% (p = 0.0573, α = 10%) were found to be the most significant factors to control the actual loading capacity and size of microcapsules.

Ascorbic Acid in Skin Health

Ascorbic acid (vitamin C) is a water-soluble vitamin and a recognized antioxidant drug that is used topically in dermatology to treat and prevent the changes associated with photoaging, as well as for the treatment of hyperpigmentation. Ascorbic acid has neutralizing properties of free radicals, being able to interact with superoxide, hydroxyl and free oxygen ions, preventing the inflammatory processes, carcinogens, and other processes that accelerate photoaging in the skin. Current research focuses on the search for stable compounds of ascorbic acid and new alternatives for administration in the dermis. Unlike plants and most animals, humans do not have the ability to synthesize our own ascorbic acid due to the deficiency of the enzyme L-gulono-gamma-lactone oxidase, which catalyzes the passage terminal in the ascorbic acid biosynthesis. To deal with this situation, humans obtain this vitamin from the diet and/or vitamin supplements, thus preventing the development of diseases and achieving general well-being. Ascorbic acid is involved in important metabolic functions and is vital for the growth and maintenance of healthy bones, teeth, gums, ligaments, and blood vessels. Ascorbic acid is a very unstable vitamin and is easily oxidized in aqueous solutions and cosmetic formulations. Ascorbic acid is extensively used as an ingredient in anti-aging cosmetic products, as sodium ascorbate or ascorbyl palmitate. This review discusses and describes the potential roles for ascorbic acid in skin health and their clinical applications (antioxidative, photoprotective, anti-aging, and anti-pigmentary effects) of topical ascorbic acid on the skin and main mechanisms of action. Considering the instability and difficulty in administering ascorbic acid, we also discuss the importance of several factors involved in the formulation and stabilization of their topical preparations in this review.

Silica-based nanosystems for therapeutic applications in the skin

Aging, exposure to oxidants, infectious pathogens, inflammogens, ultraviolet radiation and other environmental and genetic factors can result in the development of various skin disorders. Despite immense progress being made in dermatological treatments, many skin-associated problems still remain difficult to treat and various therapies have limitations. Progress in silica-based nanomaterials research provides an opportunity to overcome these drawbacks and improve therapies and is a promising tool for inclusion in clinical practice to treat skin diseases. This review focuses on the use of various types of silica nanoparticles with therapeutic applications in various skin disorders. These nanosystems improve treatment efficacy by maintaining or enhancing the effect of several drugs and are useful tools for nanomedicine, pharmaceutical sciences and future clinical applications.

Enhanced Antioxidant Activity under Biomimetic Settings of Ascorbic Acid Included in Halloysite Nanotubes

Antioxidant activity of native vitamin C (ascorbic acid, AH₂) is hampered by instability in solution. Selective loading of AH₂ into the inner lumen of natural halloysite nanotubes (HNT) yields a composite nanoantioxidant (HNT/AH₂), which was characterized and investigated for its reactivity with the persistent 1,1-diphenyl-2-picrylhydrazyl (DPPH•) radical and with transient peroxyl radicals in the inhibited autoxidation of organic substrates, both in organic solution (acetonitrile) and in buffered (pH 7.4) water in comparison with native AH₂. HNT/AH₂ showed excellent antioxidant performance being more effective than native ascorbic acid by 131% in acetonitrile and 290% (three-fold) in aqueous solution, under identical settings. Reaction with peroxyl radicals has a rate constant of 1.4 × 10⁶ M-1 s-1 and 5.1 × 10⁴ M-1 s-1, respectively, in buffered water (pH 7.4) and acetonitrile, at 30 °C. Results offer physical understanding of the factors governing HNT/AH₂ reactivity. Improved performance of HNT/AH₂ is unprecedented among forms of stabilized ascorbic acid and its relevance is discussed on kinetic grounds.

New formulation of vitamin C encapsulation by nanoliposomes: production and evaluation of particle size, stability and control release

In the present study, the effects of different ratios of milk phospholipids, cholesterol and phytosterols (Campesterol) powder (50-100%, 0-50%, and 0-50%, respectively) and sonication time (20, 25, 30, 35 and 40 min) were investigated to produce a new formulation of nanoliposomes for encapsulation of vitamin C. The results showed that increasing the time of sonication and decreasing the ratio of phospholipid to phytosterol significantly decreased nanoliposomes' particle size (p < 0.05). The maximum encapsulation efficiency was obtained at 35 and 40 min of sonication time and 75-25 ratio of phospholipid: phytosterol. Also, reducing the sonication time in the same ratio of phospholipid/phytosterol caused to increase the controlled release. The highest stability of vitamin C during 20 days was obtained in the ratio of 75-25 (phospholipids: campesterol). The results showed a positive effect of cholesterol replacement with campesterol on encapsulation efficiency, control release and stability of vitamin C in nanoliposomes.

Effects of two droplet-based dissolving microneedle manufacturing methods on the activity of encapsulated epidermal growth factor and ascorbic acid

Dissolving microneedle (DMN) is an attractive, minimally invasive transdermal drug delivery technology. The drugs encapsulated in the DMNs are exposed to a series of thermal, chemical, and physical stresses during the fabrication process, decreasing their therapeutic activity. Current DMN fabrication methods, such as micro-molding, drawing lithography, droplet-born air blowing, and centrifugal lithography, undergo different manufacturing processes involving differing stress conditions. Among the methods, we compared the effects of two droplet-based methods, droplet-born air blowing and centrifugal lithography, on the activity of encapsulated drugs using epidermal growth factor and ascorbic acid as model drugs. Although the appearance and physical properties of DMNs fabricated by the two methods were similar, the immunoreactivity of encapsulated epidermal growth factor in centrifugal lithography and droplet-born air blowing was 92.08±2.86% and 80.67±8.00%, respectively, at baseline, and decreased to 75.32±19.40% and 41.75±16.17%, respectively, 24h after drug-loading. The free-radical scavenging activity of ascorbic acid was maintained at 88.24±0.78% in DMNs fabricated by centrifugal lithography, but decreased over time to 67.02±1.11% in DMNs fabricated by droplet-born air blowing. These findings indicate that the manufacturing conditions of centrifugal lithography exert less stress on the drug-loaded DMNs, minimizing activity loss over time, and therefore that centrifugal lithography is suitable for fabricating DMNs loaded with fragile biological drugs.

Effects of VitabridC12 on Skin Inflammation

Background

VitabridC¹² is newly developed and composed of vitamin C and Vitabrid (lamellar, hydrated zinc oxide).

Objective

In this study, we aimed to investigate the effects of VitabridC¹² on psoriasis and atopic dermatitis.

Methods

Mice with imiquimod-induced psoriasis or Dermatophagoides farinae-induced atopic dermatitis were applied with VitabridC¹². The effects of VitabridC¹² were evaluated by clinical features, histology, and immunologic features by examining cytokines and chemokines.

Results

In psoriasis model, VitabridC¹² decreased epidermal thickness and reduced inflammatory cell infiltration. In atopic dermatitis model, VitabridC¹² decreased dermal infiltration of inflammatory cells, epidermal hyperplasia, and hyperkeratosis. VitabridC¹² reduced the expression levels of proinflammatory mediators such as interleukin (IL)-1β, IL-6, IL-8, IL-17A, IL-22, tumor necrosis factor-α, CXCL1, CCL17, and CCL20 as well as COX-2 in imiquimod-induced psoriatic skin lesions. Likewise, VitabridC¹² reduced the expression levels of IL-4, IL-5, IL-13, thymic stromal lymphopoietin, and CCL4 in D. farinae-induced skin lesions, and decreased the serum immunoglobulin E level in the atopic dermatitis mouse model. Particularly, the VitabridC¹²-treated mice showed downregulated expressions of mitogen-activated protein kinase (MAPK), including extracellular signal-regulated kinase (ERK), p38, and MAPK/ERK kinase, as well as inhibited phosphorylation of nuclear factor-κB p65.

Conclusion

Taken together, these findings indicate that VitabridC¹² exhibits anti-inflammatory activities and is a promising candidate as a treatment option for psoriasis or atopic dermatitis.

Enhancement of skin permeation of vitamin C using vibrating microneedles

This study was performed to evaluate the use of vibrating microneedles for the transdermal delivery of vitamin C. The microneedles were designed to vibrate at three levels of intensity. In vitro permeation by vitamin C was evaluated according to the specific conditions such as vibration intensity (levels 1, 2 and 3), application time (1, 3, 5, 7 and 10 min), and application power (500, 700 and 1,000 g). The highest permeation of vitamin C was observed at level 3 of vibration intensity, 5 min of application, and 1,000 g of application power. Vitamin C gel showed no cytotoxic effect against Pam212 cells or skin irritation effects. A pharmacokinetic study of the gel in rats was conducted under optimized conditions. The AUC₀-_∞ and C_max increased 1.35-fold and 1.44-fold, respectively, compared with those after vitamin C gel without application with vibrating microneedles. The present study suggests that vibrating microneedles can be used to facilitate the skin permeability of vitamin C under optimal conditions.

Hierarchical layered double hydroxide nanocomposites: structure, synthesis and applications

Layered double hydroxide (LDH)-based nanocomposites, constructed by interacting LDH nanoparticles with other nanomaterials (e.g. silica nanoparticles and magnetic nanoparticles) or polymeric molecules (e.g. proteins), are an emerging yet active area in healthcare, environmental remediation, energy conversion and storage. Combining advantages of each component in the structure and functions, hierarchical LDH-based nanocomposites have shown great potential in biomedicine, water purification, and energy storage and conversion. This feature article summarises the recent advances in LDH-based nanocomposites, focusing on their synthesis, structure, and application in drug delivery, bio-imaging, water purification, supercapacitors, and catalysis.

Acetyl salicylic acid–ZnAl layered double hydroxide functional nanohybrid for skin care application

In this study, a pharmaceutically active ingredient, acetyl salicylic acid (ASA), was intercalated into ZnAl layered double hydroxide (LDH). The ASA–LDH-based cream showed its high prospects in curing skin disorders like razor bumps in a short span of time.

Encapsulation of cosmetic active ingredients for topical application--a review

Microencapsulation is finding increasing applications in cosmetics and personal care markets. This article provides an overall discussion on encapsulation of cosmetically active ingredients and encapsulation techniques for cosmetic and personal care products for topical applications. Some of the challenges are identified and critical aspects and future perspectives are addressed. Many cosmetics and personal care products contain biologically active substances that require encapsulation for increased stability of the active materials. The topical and transdermal delivery of active cosmetic ingredients requires effective, controlled and safe means of reaching the target site within the skin. Preservation of the active ingredients is also essential during formulation, storage and application of the final cosmetic product. Microencapsulation offers an ideal and unique carrier system for cosmetic active ingredients, as it has the potential to respond to all these requirements. The encapsulated agent can be released by several mechanisms, such as mechanical action, heat, diffusion, pH, biodegradation and dissolution. The selection of the encapsulation technique and shell material depends on the final application of the product, considering physical and chemical stability, concentration, required particle size, release mechanism and manufacturing costs.

Preparation of an ascorbic acid/PVA–chitosan electrospun mat: a core/shell transdermal delivery system

Core/shell l-ascorbic acid/poly(vinyl alcohol)–chitosan (ASC/PVA–CS) nanofibers were successfully prepared utilizing coaxial electrospinning and their characteristics were compared with monolithic blend PVA–CS–ASC nanofibers.

In vitro controlled release of vitamin C from Ca/Al layered double hydroxide drug delivery system

A new drug delivery system for vitamin C (VC), Ca/Al layered double hydroxide (LDH), is demonstrated in this work. VC anions were intercalated successfully in the Ca/Al LDH gallery by a coprecipitation method. The interlayer space of 9.8Å suggests that VC anions are vertical to the LDH layers in the form of interdigitated bilayer. The loading of VC in LDH is 36.4wt.%. The thermal stability of VC is significantly enhanced after intercalation. In vitro VC release results show that the release time of VC in a phosphate buffer at pH7.4 was significantly extended, and the maximal percentage of VC released is 80% of the total. The Avrami-Erofe'ev equation most satisfactorily explains the release kinetics of VC, which is that the release of VC is mainly dominated by the ion-exchange reaction.

Stability, transdermal penetration, and cutaneous effects of ascorbic acid and its derivatives

Topically applied antioxidants exert their benefits by offering protection from damaging free radicals and over-the-counter cosmeceuticals incorporating antioxidants are among the most popular anti-aging products available. One potent antioxidant of particular note, vitamin C, has been extensively utilized because it possesses a variety of other cutaneous benefits including photoprotection from UV A & B, neocollagenesis, inhibition of melanogenesis and improvement of a variety of inflammatory skin disorders. However, the instability of this water-soluble vitamin, together with difficulties associated with its topical delivery, has presented issues for the formulation chemist. This article reviews the scientific data and clinical studies that underpin the stability, percutaneous absorption, and cutaneous effects of vitamin C together with its commonly utilized, commercially available derivatives.

An innovative, quick and convenient labeling method for the investigation of pharmacological behavior and the metabolism of poly(DL-lactide-co-glycolide) nanospheres

Nanoparticles of poly(DL-lactide-co-glycolide) (PLGA) in the size range 90-150 nm were produced using the physicochemical method with solvent/non-solvent systems. The encapsulation of the ascorbic acid in the polymer matrix was performed by homogenization of the water and organic phases. In vitro degradation and release tests of PLGA nanoparticles with and without encapsulated ascorbic acid were studied for more than 60 days in PBS and it has been determined that PLGA completely degrades within this period, fully releasing all encapsulated ascorbic acid. The cytotoxicity of PLGA and PLGA/ascorbic acid 85/15% nanoparticles was examined with human hepatoma cell lines (HepG2 ECACC), in vitro. The obtained results indicate that neither PLGA nanospheres nor PLGA/ascorbic acid 85/15% nanoparticles significantly affected the viability of the HepG2 cells. The investigation of the distribution and pharmacokinetics of PLGA is crucial for the effective prediction of host responses to PLGA in particular applications. Thus we present a method of labeling PLGA nanospheres and PLGA/ascorbic acid 85/15 wt% nanoparticles by (99m)Tc which binds outside, leaving the cage intact. This enables a quick and convenient investigation of the pharmacological behavior and metabolism of PLGA. The biodistribution of (99m)Tc-labeled PLGA particles with and without encapsulated ascorbic acid after different periods of time of their installation into rats was examined. PLGA nanospheres with encapsulated ascorbic acid exhibit prolonged blood circulation accompanied by time-dependent reduction in the lungs, liver and spleen, and addition in the kidney, stomach and intestine. The samples were characterized by x-ray diffraction, scanning electron microscopy, stereological analysis, transmission electron microscopy, ultraviolet spectroscopy and instant thin layer chromatography.

Fabrication, in vitro degradation and the release behaviours of poly(DL-lactide-co-glycolide) nanospheres containing ascorbic acid

Ascorbic acid (vitamin C) is essential for preserving optimal health and is used by the body for many purposes. The problem is that ascorbic acid easily decomposes into biologically inactive compounds making its use very limited in the field of pharmaceuticals, dermatological and cosmetics. By encapsulating the ascorbic acid into a polymer matrix it is assumed that its chemical instability can be overcome as well as higher, more efficient and equally distributed concentration throughout extended period of time can be achieved. This paper is describing the process of obtaining poly(dl-lactide-co-glycolide) (DLPLG) nanospheres (110-170 nm) using chemical method with solvent/non-solvent systems where obtained solutions have been centrifuged. The encapsulation of the ascorbic acid in the polymer matrix is performed by homogenisation of water and organic phases. Nanoparticles of the copolymer DLPLG with the different contents of the ascorbic acid have different morphological characteristics, i.e. variable degree of uniformity, agglomeration, sizes and spherical shaping. The degradation of the nanospheres of DLPLG, DLPLG/ascorbic acid nanoparticles and release rate of the ascorbic acid were studied for 8 weeks in a physiological solution (0.9% sodium chloride in water). The samples have been characterised by infrared spectroscopy (IR), scanning electron microscopy (SEM), stereological analysis and ultraviolet (UV) spectroscopy.