Pulmonary effects of polyvinyl chloride dust exposure on compounding workers

Impacts associated with the plastic polymers polycarbonate, polystyrene, polyvinyl chloride, and polybutadiene across their life cycle: A review

Polymers are the main building blocks of plastic, with the annual global production volume of fossil carbon-based polymers reaching over 457 million metric tons in 2019 and this figure is anticipated to triple by 2060. There is potential for environmental harm and adverse human health impacts associated with plastic, its constituent polymers and the chemicals therein, at all stages of the plastic life cycle, from extraction of raw materials, production and manufacturing, consumption, through to ultimate disposal and waste management. While there have been considerable research and policy efforts in identifying and mitigating the impacts associated with problematic plastic products such as single-use plastics and hazardous chemicals in plastics, with national and/or international regulations to phase out their use, plastic polymers are often overlooked. In this review, the polymer dimension of the current knowledge on environmental release, human exposure and health impacts of plastic is discussed across the plastic life cycle, including chemicals used in production and additives commonly used to achieve the properties needed for applications for which the polymers are generally used. This review focuses on polycarbonate, polystyrene, polyvinyl chloride, and polybutadiene, four common plastic polymers made from the hazardous monomers, bisphenol, styrene, vinyl chloride and 1,3-butadiene, respectively. Potential alternative polymers, chemicals, and products are considered. Our findings emphasise the need for a whole system approach to be undertaken for effective regulation of plastics whereby the impacts of plastics are assessed with respect to their constituent polymers, chemicals, and applications and across their entire life cycle.

Atmospheric microplastic and nanoplastic: The toxicological paradigm on the cellular system

The increasing demand for plastic in our daily lives has led to global plastic pollution. The improper disposal of plastic has resulted in a massive amount of atmospheric microplastics (MPs), which has further resulted in the production of atmospheric nanoplastics (NPs). Because of its intimate relationship with the environment and human health, microplastic and nanoplastic contamination is becoming a problem. Because microplastics and nanoplastics are microscopic and light, they may penetrate deep into the human lungs. Despite several studies demonstrating the abundance of microplastics and nanoplastics in the air, the potential risks of atmospheric microplastics and nanoplastics remain unknown. Because of its small size, atmospheric nanoplastic characterization has presented significant challenges. This paper describes sampling and characterization procedures for atmospheric microplastics and nanoplastics. This study also examines the numerous harmful effects of plastic particles on human health and other species. There is a significant void in research on the toxicity of airborne microplastics and nanoplastics upon inhalation, which has significant toxicological potential in the future. Further study is needed to determine the influence of microplastic and nanoplastic on pulmonary diseases.

Microbiome alterations from volatile organic compounds (VOC) exposures among workers in salons primarily serving women of color

Salon workers, especially those serving an ethnically and racially diverse clientele (i.e., Black/Latina), may experience disparately high levels of workplace exposures to respiratory irritants, including volatile organic compounds (VOCs). Salon workers are also reported to have a greater risk of developing respiratory conditions compared to the general population. Emerging evidence suggests that occupational chemical exposures may alter the human microbiome and that these alterations may be an important mechanism by which workplace VOC exposures adversely impact respiratory health. This preliminary research investigated the potential effects of 28 VOC urinary biomarkers on the 16S rRNA nasal microbiome in 40 workers from salons primarily serving women of color (Black and Dominican salons) compared to office workers. Our exploratory analysis revealed significant differences in microbial composition by worker group; namely dissimilar levels of Staphylococcus species (S. epidermidis and S. aureus, specifically) in salon workers compared to office workers, and higher alpha diversity levels in workers in Dominican salons compared to workers in Black salons. Within-sample alpha diversity levels tended to be decreased with higher VOC urinary biomarker concentrations, significantly for carbon disulfide, acrolein, acrylonitrile, crotonaldehyde, and vinyl chloride biomarkers. Our research highlights that occupational exposures, particularly to chemicals like VOCs, can impact the respiratory microbiome in the vulnerable salon worker group. Further understanding of the potential effects of chemical mixtures on microbial composition may provide key insights to respiratory health and other adverse health outcomes, as well as direct prevention efforts in this largely historically understudied occupational population.

Atmospheric micro (nano) plastics: future growing concerns for human health

Abstract

Plastics are an integral but largely inconspicuous part of daily human routines. The present review paper uses cross-disciplinary scientific literature to examine and assess the possible effects of nanoplastics (NPs) concerning microplastics (MPs) on human health and summarizes crucial areas for future research. Although research on the nature and consequences of MPs has seen a substantial rise, only limited studies have concentrated on the atmospheric nanosized polymeric particles. However, due to the intrinsic technological complications in separating and computing them, their existence has been difficult to determine correctly. There is a consensus that these are not only existing in the environment but can get directly released or as the outcome of weathering of larger fragments, and it is believed to be that combustion can be the tertiary source of polymeric particles. NPs can have harmful consequences on human health, and their exposure may happen via ingestion, inhalation, or absorption by the skin. The atmospheric fallout of micro (nano) plastics may be responsible for contaminating the environment. Apart from this, different drivers affect the concentration of micro (nano) plastics in every environment compartment like wind, water currents, vectors, soil erosion, run-off, etc. Their high specific surface for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. These NPs could potentially cause physical damage by the particles themselves and biological stress by NPs alone or by leaching additives. However, there is minimal understanding of the occurrence, distribution, abundance, and fate of NPs in the environment, partially due to the lack of suitable techniques for separating and identifying NPs from complex environmental matrices.

Highlights

Micro (nano) plastics generated may reach the soil, water, and atmospheric compartments.Atmospheric currents serve as a way to transport, leading to micro (nano) plastics pollution.Exposure to micro (nano) plastics may happen via ingestion, inhalation, or absorption by the skin.Nanoplastics may be environmentally more harmful than other plastic particles; the focus should be on defining the exact size range.Visual classification of micro (nano) plastics is poor in reliability and may also contribute to microplastics being misidentified.

Graphical abstract

From properties to toxicity: Comparing microplastics to other airborne microparticles

Microplastic (MP) debris is considered as a potentially hazardous material. It is omnipresent in our environment, and evidence that MP is also abundant in the atmosphere is increasing. Consequently, the inhalation of these particles is a significant exposure route to humans. Concerns about potential effects of airborne MP on human health are rising. However, currently, there are not enough studies on the putative toxicity of airborne MP to adequately assess its impact on human health. Therefore, we examined potential drivers of airborne MP toxicity. Physicochemical properties like size, shape, ζ-potential, adsorbed molecules and pathogens, and the MP's bio-persistence have been proposed as possible drivers of MP toxicity. Since their role in MP toxicity is largely unknown, we reviewed the literature on toxicologically well-studied non-plastic airborne microparticles (asbestos, silica, soot, wood, cotton, hay). We aimed to link the observed health effects and toxicology of these microparticles to the abovementioned properties. By comparing this information with studies on the effects of airborne MP, we analyzed possible mechanisms of airborne MP toxicity. Thus, we provide a basis for a mechanistic understanding of airborne MP toxicity. This may enable the assessment of risks associated with airborne MP pollution, facilitating effective policymaking and product design.

Newly Emerging Airborne Pollutants: Current Knowledge of Health Impact of Micro and Nanoplastics

Plastics are ubiquitous persistent pollutants, forming the most representative material of the Anthropocene. In the environment, they undergo wear and tear (i.e., mechanical fragmentation, and slow photo and thermo-oxidative degradation) forming secondary microplastics (MPs). Further fragmentation of primary and secondary MPs results in nanoplastics (NPs). To assess potential health damage due to human exposure to airborne MPs and NPs, we summarize the evidence collected to date that, however, has almost completely focused on monitoring and the effects of airborne MPs. Only in vivo and in vitro studies have assessed the toxicity of NPs, and a standardized method for their analysis in environmental matrices is still missing. The main sources of indoor and outdoor exposure to these pollutants include synthetic textile fibers, rubber tires, upholstery and household furniture, and landfills. Although both MPs and NPs can reach the alveolar surface, the latter can pass into the bloodstream, overcoming the pulmonary epithelial barrier. Despite the low reactivity, the number of surface area atoms per unit mass is high in MPs and NPs, greatly enhancing the surface area for chemical reactions with bodily fluids and tissue in direct contact. This is proven in polyvinyl chloride (PVC) and flock workers, who are prone to persistent inflammatory stimulation, leading to pulmonary fibrosis or even carcinogenesis.

Airborne microplastics: Consequences to human health?

Microplastics have recently been detected in atmospheric fallout in Greater Paris. Due to their small size, they can be inhaled and may induce lesions in the respiratory system dependent on individual susceptibility and particle properties. Even though airborne microplastics are a new topic, several observational studies have reported the inhalation of plastic fibers and particles, especially in exposed workers, often coursing with dyspnea caused by airway and interstitial inflammatory responses. Even though environmental concentrations are low, susceptible individuals may be at risk of developing similar lesions. To better understand airborne microplastics risk to human health, this work summarizes current knowledge with the intention of developing awareness and future research in this area.

Occupational asthma in a cable manufacturing company

Background:

During the past decade, incidence of asthma has increased, which might have been due to environmental exposures.

Objectives:

Considering the expansion of cable manufacturing industry in Iran, the present study was conducted to evaluate the prevalence of occupational asthma in a cable manufacturing company in Iran as well as its related factors.

Patients and Methods:

This study was conducted on employees of a cable manufacturing company in Yazd, Iran, in 2012. The workers were divided into two groups of exposure (to toluene diisocyanate, polyvinyl chloride, polyethylene or polypropylene) and without exposure. Diagnosis of occupational asthma was made based on the subjects’ medical history, spirometry and peak flowmetry, and its frequency was compared between the two groups.

Results:

The overall prevalence of occupational asthma was 9.7%. This rate was 13.8% in the exposed group. Logistic regression analysis showed that even after adjustment for confounding factors, a significant correlation existed between the frequency of occupational asthma and exposure to the produced dust particles (P < 0.05). In addition, age, work experience, body mass index, cigarette smoking and shift work had significant correlations with the prevalence of occupational asthma (P < 0.05).

Conclusions:

Considering the high prevalence of occupational asthma among cable manufacturing company workers in Iran, this issue needs to be addressed immediately in addition to reduction of exposure among subjects. Reduction in work shift duration, implementation of tobacco control and cessation programs for the personnel, and performing spirometry tests and respiratory examinations in shorter periods may be among effective measures for reducing the incidence of occupational asthma in this industry.

Case report of occupational asthma induced by polyvinyl chloride and nickel

Polyvinyl chloride (PVC) is a widely used chemical for production of plastics. However occupational asthma (OA) caused by PVC has been reported only rarely. We report a 34-yr-old male wallpaper factory worker with OA due to PVC and nickel (Ni) whose job was mixing PVC with plasticizers. He visited the emergency room due to an asthma attack with moderate airflow obstruction and markedly increased sputum eosinophil numbers. A methacholine challenge test was positive (PC20 2.5 mg/mL). Bronchoprovocation tests with both PVC and Ni showed early and late asthmatic responses, respectively. Moreover, the fractional concentration of exhaled nitric oxide (FeNO) was increased after challenge with PVC. To our knowledge, this is the first case of OA in Korea induced by exposure to both PVC and Ni. We suggest that eosinophilic inflammation may be involved in the pathogenesis of PVC-induced OA and that FeNO monitoring can be used for its diagnosis.

Pulmonary toxicity of polyvinyl chloride particles after a single intratracheal instillation in rats. Time course and comparison with silica

Our previous in vitro studies indicated that emulsion polyvinyl chloride (PVC) particles (PVC-E3), with a mean diameter of 2 microm, exhibited a moderate toxicity in different pulmonary cell cultures. The in vitro cytotoxicity and pro-inflammatory potential of PVC-E3 particles were reduced when the additives had been "washed off" (PVC-W3), indicating that PVC-particle associated toxicity is probably related to the residual additives. In the present study, male Wistar rats (230 +/- 18 g) received a single intratracheal instillation of vehicle, crystalline silica particles [Min-U-Sil, 10 mg/kg body weight (BW)], PVC-E3 (10 or 50 mg/kg BW), or PVC-W3 (10 or 50 mg/kg BW). After 2, 7, 28, or 90 days, the rats were sacrificed (n = 6) and pulmonary injury and inflammation were determined by measuring lung weight, lactate dehydrogenase (LDH) activity and protein concentrations in bronchoalveolar lavage fluid (BALF), differential BALF cell count, and histopathology. Silica exposure resulted in pulmonary inflammation and damage at all time points with a progressive deterioration. Exposure to high concentrations of PVC particles caused pulmonary inflammation and damage, which were similar to the silica-exposed group at 2 days, but at 90 days, most parameters had returned to the control level, except for minor histopathological lesions. PVC-E3 did not induce more damage than PVC-W3. Two days after exposure, PVC-W3 caused less neutrophil but more eosinophil influx than PVC-E3. Although the pulmonary toxicity of both PVC-E3 and PVC-W3 appeared limited, this in vivo study has not confirmed the conclusion from the in vitro toxicity tests that removal of residual additives reduces the toxicity of PVC-E3 particles.

In vitro toxicity assessment of polyvinyl chloride particles and comparison of six cellular systems

Occupational exposure to polyvinyl chloride (PVC) dust has been occasionally associated with lung disease. Our aim was to evaluate the in vitro toxicity of various types of PVC particles in relevant cell culture systems. Six samples from the normal industrial suspension process (PVC-S) and eight samples from the emulsion process (PVC-E) were studied. Cytotoxicity was assessed, using the MTT assay, after 20 h of incubation in A549 cells and in primary cultures of alveolar macrophages (AM) and type II pneumocytes (TII) obtained from rats (r-AM, r-TII) or from human surgical specimens (h-AM, h-TII). Hemolysis was assessed after 2 h of incubation with human erythrocytes (h-RBC). A positive control (crystalline SiO(2), Min-U-Sil) and relevant additives of these PVC particles were tested concurrently. No toxicity of PVC-S particles could be established up to 5 mg/ml in the hemolysis test and 2.5 mg/ml in the MTT assay. In contrast, 4 out of 8 PVC-E particles induced significant toxicity, with EC50 values ranging from 0.7 to 3.7 mg/ml in the hemolysis test and from 0.2 to 1.2 mg/ml in primary cells. The most toxic particles were those that contained the additives with the highest in vitro cytotoxicity. There was a good correlation between EC50 values obtained in relevant bioassays. The sensitivity order of the cell systems was A549 < h-RBC approximately h-TII < or = h-AM < r-TII < or = r-AM for the particles. In conclusion, PVC-E particles produced a moderate in vitro toxicity for primary rat and human pulmonary cells, probably because of the residual presence of additives.

Update of the follow-up of mortality and cancer incidence among European workers employed in the vinyl chloride industry

Although vinyl chloride is an established cause of liver angiosarcoma, the evidence is inconclusive on whether it also causes other neoplastic and nonneoplastic chronic liver diseases as well as neoplasms in other organs. Furthermore, the shape of the dose-response relation for angiosarcoma is uncertain. We have extended for approximately 8 years the mortality and cancer incidence follow-up of 12,700 male workers in the vinyl chloride industry in four European countries. All-cause mortality was lower than expected, whereas cancer mortality was close to expected. A total of 53 deaths from primary liver cancer (standardized mortality ratio 2.40, 95% confidence interval = 1.80-3.14) and 18 incident cases of liver cancer were identified, including 37 angiosarcomas, 10 hepatocellular carcinomas, and 24 liver cancers of other and unknown histology. In Poisson regression analyses we observed a marked exposure response for all liver cancers, angiosarcoma, and hepatocellular carcinoma. The exposure-response trend estimated for liver cancer in analyses restricted to cohort members with cumulative exposures of <1,500 parts per million-years was close to that estimated for the full cohort (relative risk of 2.0 per logarithmic unit of cumulative dose). No strong relation was observed between cumulative vinyl chloride exposure and other cancers. Although cirrhosis mortality was decreased overall, there was a trend with cumulative exposure.

Prevalence of neuropsychiatric and mucous membrane irritation complaints among Palestinian shoe factory workers exposed to organic solvents and plastic compounds

BACKGROUND

Long-term exposure to organic solvents is associated with neuropsychiatric and mucus membrane irritation. In developing countries, efforts to secure a good working environment are inadequate and protection against chemical exposures is often neglected.

METHODS

In a cross-sectional survey, the prevalence of self-reported health complaints and the association with long-term exposure to solvents and plastic materials in the work environment was studied among 167 shoe-factory workers. Prevalences and adjusted prevalence ratios (PR)were calculated in Cox regression. 95% confidence intervals were estimated for PRs of adverse health effects.

RESULTS

Overall, the workers reported high prevalences of neuropsychiatric and mucus membrane complaints: headache (65%), mental irritability (53%), tingling of limbs (46%), and sore eyes (43%). Cleaning work was associated with tingling of limbs (PR = 1.8, 1.0-3.2), sore eyes (PR = 1.9, 1.1-3.3), and breathing difficulty (PR = 2.0, 1.0-3.9); plastic work was associated with tingling of limbs (PR = 1.8, 1.2-2.9)and sore eyes (PR = 1.7, 1.1-2.7); and varnishing was associated with breathing difficulty (PR = 1.9, 1.1-3.5).

CONCLUSIONS

The high prevalence of self-reported health complaints and the exposure-outcome association could be due to volatile organic solvents (dichloromethane, n-hexane)and plastic compounds (isocyanates and polyvinyl chloride). Absence of a satisfactory work environment is likely to contribute to high exposure levels.