Solubility and dissolution enhancement of etoricoxib by solid dispersion technique using sugar carriers

Fabrication of gastro-floating sustained-release etoricoxib and famotidine tablets: design, optimization, in-vitro, and in-vivo evaluation

In this study, a new gastro-floating sustained-release tablet (GFT) with a combination of Etoricoxib (ET) and Famotidine (FM) was successfully developed. GFTs were prepared by using a combination of hydrophilic swellable natural/semi-synthetic polymers as a controlled-release layer. Through a 24 full factorial statistical experimental design, the effects of formulation factors on the release of GFTs were conducted. The ideal floating tablet (FT) comprised konjac-gum (150 mg), guar-gum (26.57 mg), xanthan-gum (54.17 mg), and HPMC-K15-M (69.25 mg). The ideal FT exhibited a high swelling index (SI) (297.7%) and rapid FLT (around 50 s) in 0.1 N HCl as well as controlled release of ET (22.43% in 1 h and 77.47% in 8 h) and FM (24.89% in 1 h and 93.82% in 8 h) with the absence of any drug-excipient interactions. The AUC0∼72 (ng h/mL) of ET and FM in the GFTs were approximately double-fold of the market, respectively. The relative bioavailability was (207.48 ± 12.02% and 208.51 ± 13.11%) compared with commercial tablets. The X-ray imaging showed a promising buoyancy ability for approximately 8 h. These findings revealed the successful preparation of the sustained-release floating tablet with improved dual drug delivery.

Chondroitin Sulphate-Chitosan polyelectrolyte complexes for etorocoxib transdermal delivery: in silico, in vitro and in vivo studies

Rheumatoid arthritis (RA) is a chronic autoimmune disease which affects around 1% globally leading to joint inflammation and disability. Etorocoxib (ETR) is a potent COX-2 inhibitor traditionally used orally to alleviate RA induced inflammation, yet it causes hepatic side effects on prolonged use. This study aims for in silico optimization of ETR polyelectrolyte complex (PEC) utilizing chondroitin sulphate (CS) and chitosan (CH) for transdermal delivery to RA-inflamed joints with a synergistic anti-inflammatory action owing to CS. An artificial neural network (ANN) combined with 22 factorial design was used to optimize the PEC formula according to particle size (PS) and entrapment efficiency (%EE) by varying CS and CH concentrations. The optimum ETR PEC was incorporated in a gel and examined for its in vitro release, ex vivo permeation, in vivo inflammatory biomarkers, and histopathological evaluation in rats. The optimized formula (F3) with 0.1 CH% w/w and 0.5 CS %w/w showed a PS of 214.98 ± 17.24 nm, %EE 75.31 ± 1.67%, and enhanced in vitro release profile, ex vivo permeation and in vivo anti-inflammatory effect compared to ETR gel via suppressing the expression of IL-6, TNF-α, and TGF-β pro-inflammatory cytokines as well as the additional anti-inflammatory effect of CS. In conclusion, ETR-PEC gel holds promise as transdermal therapy for managing RA-induced inflammation.

Fabrication of pH-dependent solid dispersion for oral colon-targeted delivery of notoginsenoside R1 and its protective effects on ulcerative colitis mice

Notoginsenoside R1 (R1), which originated from the rhizomes and roots of Panax notoginseng, is classified as a Biopharmaceutical Classification System class III drug with good solubility but poor oral absorption. Although R1 can alleviate the inflammation of dextran sulfate sodium (DSS)-induced colitis in mice, the problem of acid degradation and low bioavailability limit its application. The purpose of this study was aimed to design one kind of pH-dependent solid dispersion for oral colon-targeted delivery of R1. Using Eudragit S100 (ES 100) and PEG 4000 as the pH-dependent carriers, R1 solid dispersion (R1-SD) was fabricated by solvent evaporation method. Scanning electron microscopy, differential scanning calorimetry, and powder X-ray diffraction analysis indicated that R1-SD was completely formed, the surface was smooth surface and the strip crystal structure of R1 disappeared. The in vitro release profile of R1-SD (R1-ES 100-PEG 4000, 1:7:1, weight ratio) exhibited that R1-SD was not released in media simulating the gastric condition (pH 1.2), but better release characteristics of the drug could be obtained in media simulating the intestinal condition (less than 30% in pH 6.8 phosphate-buffered saline and more than 90% in pH 7.6 condition). The in vitro colon absorption test showed that the absorption rate and cumulative release of R1-SD were higher than those of R1. R1-SD and R1 had apparent protective effect on colon shortening, inflammatory infiltrating tissue injury, weight loss, diarrhea, blood stool in mice with ulcerative colitis induced by DSS, and the protective effect of R1-SD was better than that of R1, which indicated R1-SD has good practical application prospects.

Emerging Role of Biopharmaceutical Classification and Biopharmaceutical Drug Disposition System in Dosage form Development: A Systematic Review

Biopharmaceutical classification system (BCS) is an advanced tool used for classifying medicines based on dissolution, water solubility, and intestinal permeability, which affect the absorption of active pharmaceutical ingredients (API) from immediate-release solid oral forms. It is useful to the formulation researchers to develop novel dosage forms based on modernistic rather than experimental approaches. The current review focuses on the fundamentals, objectives, guidance of BCS, characteristics of BCS drugs, their importance and applications of BCS. This review explains the challenges in drug development in terms of solubility and in vivo disposition. In the current review, new strategies for improving BCS II drug solubility as well as biopharmaceutical drug disposition properties which are utilized throughout the early stages of drug development and commercialization are mainly discussed.

Cefquinome Sulfate Oily Nanosuspension Designed for Improving its Bioavailability in the Treatment of Veterinary Infections

Introduction

Cefquinome sulfate (CS) is the first fourth-generation antibiotic for animals, which has a wide antibacterial spectrum, strong antibacterial activity and low drug resistance. However, it is accompanied by problems of poor therapeutic efficacy. In this context, the use of nanosuspensions have been found to be an attractive strategy. The main objective of this work is to develop a new oily nanosuspension to improve bioavailability and stability of CS formulations.

Methods

After screening the formulations, cefquinome sulfate oily nanosuspension (CS-NSP) was prepared by mortar grinding, using propylene glycol dicaprolate/dicaprate (Labrafac™ PG) as oil medium and caprylocaproyl polyoxyl-8 glycerides (Labrasol®) as stabilizer. The properties of CS-NSP were investigated by testing its physicochemical characteristics, stability, in vitro release, hemolysis, and muscle irritation. The in vivo pharmacokinetics of CS-NSP was studied using rats.

Results

Results show that CS-NSP presents suitable stability, physicochemical properties and safety. Moreover, a rapid release and high bioavailability of CS-NSP have also been verified in the study. Pharmacokinetic experiments in vivo showed that the bioavailability of CS-NSP was about 1.6 times that of commercial cefquinome sulfate injection (CS-INJ, Chuangdao®) (p<0.01). These advantages of CS-NSP were carried out by small particle size and low viscosity, being associated with the use of Labrafac PG and stabilizer Labrasol.

Conclusion

The results proved that the new preparation is safe and effective and is expected to become a promising veterinary nanodelivery system.

Synthesis of Copper Oxide-Based Nanoformulations of Etoricoxib and Montelukast and Their Evaluation through Analgesic, Anti-Inflammatory, Anti-Pyretic, and Acute Toxicity Activities

Copper oxide nanoparticles (CuO NPs) were synthesized through the coprecipitation method and used as nanocarriers for etoricoxib (selective COX-2 inhibitor drug) and montelukast (leukotriene product inhibitor drug) in combination therapy. The CuO NPs, free drugs, and nanoformulations were investigated through UV/Vis spectroscopy, FTIR spectroscopy, XRD, SEM, and DLS. SEM imaging showed agglomerated nanorods of CuO NPs of about 87 nm size. The CE1, CE2, and CE6 nanoformulations were investigated through DLS, and their particle sizes were 271, 258, and 254 nm, respectively. The nanoformulations were evaluated through in vitro anti-inflammatory activity, in vivo anti-inflammatory activity, in vivo analgesic activity, in vivo anti-pyretic activity, and in vivo acute toxicity activity. In vivo activities were performed on albino mice. BSA denaturation was highly inhibited by CE1, CE2, and CE6 as compared to other nanoformulations in the in vitro anti-inflammatory activity. The in vivo bioactivities showed that low doses (5 mg/kg) of nanoformulations were more potent than high doses (10 and 20 mg/kg) of free drugs in the inhibition of pain, fever, and inflammation. Lastly, CE2 was more potent than that of other nanoformulations.

Investigation of Vitamin D2 and Vitamin D3 Hydroxylation by Kutzneria albida

The active vitamin D metabolites 25-OH-D and 1α,25-(OH)2 -D play an essential role in controlling several cellular processes in the human body and are potentially effective in the treatment of several diseases, such as autoimmune diseases, cardiovascular diseases and cancer. The microbial synthesis of vitamin D2 (VD2 ) and vitamin D3 (VD3 ) metabolites has emerged as a suitable alternative to established complex chemical syntheses. In this study, a novel strain, Kutzneria albida, with the ability to form 25-OH-D2 and 25-OH-D3 was identified. To further improve the conversion of the poorly soluble substrates, several solubilizers were tested. 100-fold higher product concentrations of 25-OH-D3 and tenfold higher concentrations of 25-OH-D2 after addition of 5 % (w/v) 2-hydroxypropyl β-cyclodextrin (2-HPβCD) were reached. Besides the single-hydroxylation products, the human double-hydroxylation products 1,25-(OH)2 -D2 and 1,25-(OH)2 -D3 and various other potential single- and double-hydroxylation products were detected. Thus, K. albida represents a promising strain for the biotechnological production of VD2 and VD3 metabolites.

Potential of solid dispersions to enhance solubility, bioavailability, and therapeutic efficacy of poorly water-soluble drugs: newer formulation techniques, current marketed scenario and patents

In the last few decades, solid dispersion (SD) technology had been studied as an approach to produce an amorphous carrier to enhance the solubility, dissolution rate, and bioavailability of poorly water-soluble drugs. The use of suitable carrier and methodology in the preparation of SDs play a significant role in the biological behavior of the SDs. SDs have been prepared using a variety of pharmaceutically acceptable polymers utilizing various novel technologies. In the recent years, much attention has been paid toward the use of novel carriers and methodologies in exploring novel types of SDs to enhance therapeutic efficacy and bioavailability. The use of novel carriers and methodologies would be very beneficial for formulation scientists to develop some SDs-based formulations for their commercial use and clinical applications. In the present review, current literature of novel methodologies for SD preparation to enhance the dissolution rate, solubility, therapeutic efficacy, and bioavailability of poorly water-soluble drugs has been summarized and analyzed. Further, the current status of SDs, patent status, and future prospects have also been discussed.

Pharmaceutical Dispersion Techniques for Dissolution and Bioavailability Enhancement of Poorly Water-Soluble Drugs

Over the past decades, a large number of drugs as well as drug candidates with poor dissolution characteristics have been witnessed, which invokes great interest in enabling formulation of these active ingredients. Poorly water-soluble drugs, especially biopharmaceutical classification system (BCS) II ones, are preferably designed as oral dosage forms if the dissolution limit can be broken through. Minimizing a drug’s size is an effective means to increase its dissolution and hence the bioavailability, which can be achieved by specialized dispersion techniques. This article reviews the most commonly used dispersion techniques for pharmaceutical processing that can practically enhance the dissolution and bioavailability of poorly water-soluble drugs. Major interests focus on solid dispersion, lipid-based dispersion (nanoencapsulation), and liquisolid dispersion (drug solubilized in a non-volatile solvent and dispersed in suitable solid excipients for tableting or capsulizing), covering the formulation development, preparative technique and potential applications for oral drug delivery. Otherwise, some other techniques that can increase the dispersibility of a drug such as co-precipitation, concomitant crystallization and inclusion complexation are also discussed. Various dispersion techniques provide a productive platform for addressing the formulation challenge of poorly water-soluble drugs. Solid dispersion and liquisolid dispersion are most likely to be successful in developing oral dosage forms. Lipid-based dispersion represents a promising approach to surmounting the bioavailability of low-permeable drugs, though the technique needs to traverse the obstacle from liquid to solid transformation. Novel dispersion techniques are highly encouraged to develop for formulation of poorly water-soluble drugs.

Solubility Enhancement of Etoricoxib by Cosolvency Approach

The purpose of the present study was to examine and compare the cosolvency using three different cosolvents, namely PEG 400, PG, and glycerin on the aqueous solubility enhancement of a poorly aqueous soluble drug, etoricoxib, since solubilization of nonpolar drugs constitutes one of the important tasks in the formulation design of liquid dosage forms. The aqueous solubility of etoricoxib was  mg/mL, which was significantly improved by the addition of PEG 400, PG, and glycerin as cosolvents. It was scrutinized that the less-polar solvents were found to increase the aqueous solubility by greater extent, thus accentuating hydrophobic interaction mechanism. Among various solvent-cosolvent blends investigated, water-PEG 400 showed highest solubilization potential. Thus, the study generated an important array of data to compare the effect of these cosolvents on the aqueous solubility of etoricoxib.