What are the local and systemic biologic reactions and mediators to wear debris, and what host factors determine or modulate the biologic response to wear particles?

Nanoscale ZnO doping in prosthetic polymers mitigate wear particle-induced inflammation and osteolysis through inhibiting macrophage secretory autophagy

Wear particles produced by joint replacements induce inflammatory responses that lead to periprosthetic osteolysis and aseptic loosening. However, the precise mechanisms driving wear particle-induced osteolysis are not fully understood. Recent evidence suggests that autophagy, a cellular degradation process, plays a significant role in this pathology. This study aimed to clarify the role of autophagy in mediating inflammation and osteolysis triggered by wear particles and to evaluate the therapeutic potential of zinc oxide nanoparticles (ZnO NPs). We incorporated ZnO into the prosthetic material itself, ensuring that the wear particles inherently carried ZnO, providing a targeted and sustained intervention. Our findings reveal that polymer wear particles induce excessive autophagic activity, which is closely associated with increased inflammation and osteolysis. We identified secretory autophagy as a key mechanism for IL-1β secretion, exacerbating osteolysis. Both in vitro and in vivo experiments demonstrated that ZnO-doped particles significantly inhibit autophagic overactivation, thereby reducing inflammation and osteolysis. In summary, this study establishes secretory autophagy as a critical mechanism in wear particle-induced osteolysis and highlights the potential of ZnO-doped prosthetic polymers for targeted, sustained mitigation of periprosthetic osteolysis.

Nano wear particles and the periprosthetic microenvironment in aseptic loosening induced osteolysis following joint arthroplasty

Joint arthroplasty is an option for end-stage septic arthritis due to joint infection after effective control of infection. However, complications such as osteolysis and aseptic loosening can arise afterwards due to wear and tear caused by high joint activity after surgery, necessitating joint revision. Some studies on tissue pathology after prosthesis implantation have identified various cell populations involved in the process. However, these studies have often overlooked the complexity of the altered periprosthetic microenvironment, especially the role of nano wear particles in the etiology of osteolysis and aseptic loosening. To address this gap, we propose the concept of the "prosthetic microenvironment". In this perspective, we first summarize the histological changes in the periprosthetic tissue from prosthetic implantation to aseptic loosening, then analyze the cellular components in the periprosthetic microenvironment post prosthetic implantation. We further elucidate the interactions among cells within periprosthetic tissues, and display the impact of wear particles on the disturbed periprosthetic microenvironments. Moreover, we explore the origins of disease states arising from imbalances in the homeostasis of the periprosthetic microenvironment. The aim of this review is to summarize the role of relevant factors in the microenvironment of the periprosthetic tissues, in an attempt to contribute to the development of innovative treatments to manage this common complication of joint replacement surgery.

The Effects of Titanium Dioxide Nanoparticles on Osteoblasts Mineralization: A Comparison between 2D and 3D Cell Culture Models

Although several studies assess the biological effects of micro and titanium dioxide nanoparticles (TiO₂ NPs), the literature shows controversial results regarding their effect on bone cell behavior. Studies on the effects of nanoparticles on mammalian cells on two-dimensional (2D) cell cultures display several disadvantages, such as changes in cell morphology, function, and metabolism and fewer cell-cell contacts. This highlights the need to explore the effects of TiO₂ NPs in more complex 3D environments, to better mimic the bone microenvironment. This study aims to compare the differentiation and mineralized matrix production of human osteoblasts SAOS-2 in a monolayer or 3D models after exposure to different concentrations of TiO₂ NPs. Nanoparticles were characterized, and their internalization and effects on the SAOS-2 monolayer and 3D spheroid cells were evaluated with morphological analysis. The mineralization of human osteoblasts upon exposure to TiO₂ NPs was evaluated by alizarin red staining, demonstrating a dose-dependent increase in mineralized matrix in human primary osteoblasts and SAOS-2 both in the monolayer and 3D models. Furthermore, our results reveal that, after high exposure to TiO₂ NPs, the dose-dependent increase in the bone mineralized matrix in the 3D cells model is higher than in the 2D culture, showing a promising model to test the effect on bone osteointegration.

The dual role of autophagy in periprosthetic osteolysis

Periprosthetic osteolysis (PPO) induced by wear particles is an important cause of aseptic loosening after artificial joint replacement, among which the imbalance of osteogenesis and osteoclastic processes occupies a central position. The cells involved in PPO mainly include osteoclasts (macrophages), osteoblasts, osteocytes, and fibroblasts. RANKL/RANK/OGP axis is a typical way for osteolysis. Autophagy, a mode of regulatory cell death and maintenance of cellular homeostasis, has a dual role in PPO. Although autophagy is activated in various periprosthetic cells and regulates the release of inflammatory cytokines, osteoclast activation, and osteoblast differentiation, its beneficial or detrimental role remains controversy. In particular, differences in the temporal control and intensity of autophagy may have different effects. This article focuses on the role of autophagy in PPO, and expects the regulation of autophagy to become a powerful target for clinical treatment of PPO.

Pyroptosis in Periprosthetic Osteolysis

Periprosthetic osteolysis (PPO) along with aseptic loosening (AL) caused by wear particles after artificial joint replacement is the key factor in surgical failure and subsequent revision surgery, however, the precise molecular mechanism underlying PPO remains unclear. Aseptic inflammation triggered by metal particles, resulting in the imbalance between bone formation by osteoblasts and bone resorption by osteoclasts may be the decisive factor. Pyroptosis is a new pro-inflammatory pattern of regulated cell death (RCD), mainly mediated by gasdermins (GSDMs) family, among which GSDMD is the best characterized. Recent evidence indicates that activation of NLRP3 inflammasomes and pyroptosis play a pivotal role in the pathological process of PPO. Here, we review the pathological process of PPO, the molecular mechanism of pyroptosis and the interventions to inhibit the inflammation and pyroptosis of different cells during the PPO. Conclusively, this review provides theoretical support for the search for new strategies and new targets for the treatment of PPO by inhibiting pyroptosis and inflammation.

Spectrometric Analysis of the Wear from Metallic and Ceramic Dental Implants following Insertion: An In Vitro Study

Titanium wear is a growing area of interest within dental implantology. This study aimed to investigate titanium and zirconium wear from dental implants at the time of insertion using X-ray-fluorescence spectrometry (XRF) and an in vitro protocol utilizing artificial bovine bone plates. Five groups were analyzed using XRF-spectrometry: groups 1–4 (titanium implants) and group 5 (zirconia implants). The implants were inserted into two bone blocks held together by a vice. The blocks were separated, and the insertion sites were analyzed for titanium (Ti) and zirconium (Zr). Statistical descriptive analyses of Ti and Zr concentrations in the coronal, middle and apical bone interface were performed. A comparative analysis confirmed differences between the implant’s surface stability and Ti accumulation within the insertion sites of the bone block. There was a direct relationship between implant length and the quantity of titanium found on the bone block. The data generally indicates greater quantities of titanium in the coronal thirds of the implants, and less in the apical thirds. The titanium and zirconium found in the bone samples where the group 5 implants were inserted was not of statistical significance when compared to control osteotomies. The results of this study confirm wear from metallic, but not ceramic, dental implants at the time of insertion.

Macrophage Polarization and the Osteoimmunology of Periprosthetic Osteolysis

PURPOSE OF REVIEW

Joint replacement has revolutionized the treatment of end-stage arthritis. We highlight the key role of macrophages in the innate immune system in helping to ensure that the prosthesis-host interface remains biologically robust.

RECENT FINDINGS

Osteoimmunology is of great interest to researchers investigating the fundamental biological and material aspects of joint replacement. Constant communication between cells of the monocyte/macrophage/osteoclast lineage and the mesenchymal stem cell-osteoblast lineage determines whether a durable prosthesis-implant interface is obtained, or whether implant loosening occurs. Tissue and circulating monocytes/macrophages provide local surveillance of stimuli such as the presence of byproducts of wear and can quickly polarize to pro- and anti-inflammatory phenotypes to re-establish tissue homeostasis. When these mechanisms fail, periprosthetic osteolysis results in progressive bone loss and painful failure of mechanical fixation. Immune modulation of the periprosthetic microenvironment is a potential intervention to facilitate long-term durability of prosthetic interfaces.

Bioactive coatings with anti-osteoclast therapeutic agents for bone implants: Enhanced compliance and prolonged implant life

The use of therapeutic agents that inhibit bone resorption is crucial to prolong implant life, delay revision surgery, and reduce the burden on the healthcare system. These therapeutic agents include bisphosphonates, various nucleic acids, statins, proteins, and protein complexes. Their use in systemic treatment has several drawbacks, such as side effects and insufficient efficacy in terms of concentration, which can be eliminated by local treatment. This review focuses on the incorporation of osteoclast inhibitors (antiresorptive agents) into bioactive coatings for bone implants. The ability of bioactive coatings as systems for local delivery of antiresorptive agents to achieve optimal loading of the bioactive coating and its release is described in detail. Various parameters such as the suitable concentrations, release times, and the effects of the antiresorptive agents on nearby cells or bone tissue are discussed. However, further research is needed to support the optimization of the implant, as this will enable subsequent personalized design of the coating in terms of the design and selection of the coating material, the choice of an antiresorptive agent and its amount in the coating. In addition, therapeutic agents that have not yet been incorporated into bioactive coatings but appear promising are also mentioned. From this work, it can be concluded that therapeutic agents contribute to the biocompatibility of the bioactive coating by enhancing its beneficial properties.

Effect of Implant Surface Roughness and Macro- and Micro-Structural Composition on Wear and Metal Particles Released

Background: Considerations about implant surface wear and metal particles released during implant placement have been reported. However, little is known about implant surface macro- and microstructural components, which can influence these events. The aim of this research was to investigate accurately the surface morphology and chemical composition of commercially available dental implants, by means of multivariate and multidimensional statistical analysis, in order to predict their effect on wear onset and particle release during implant placement. Methods: The implant surface characterization (roughness, texture) was carried out through Confocal Microscopy and SEM-EDS analysis; the quantitative surface quality variables (amplitude and hybrid roughness parameters) were statistically analyzed through post hoc Bonferroni’s test for pair comparisons. Results: The parameters used by discriminant analysis evidenced several differences in terms of implant surface roughness between the examined fixtures. In relation to the observed surface quality, some of the investigated implants showed the presence of residuals due to the industrial surface treatments. Conclusions: Many structural components of the dental implant surface can influence the wear onset and particles released during the implant placement.

Titanium Wear of Dental Implants from Placement, under Loading and Maintenance Protocols

The objective of this review was to analyze the process of wear of implants leading to the shedding of titanium particles into the peri-implant hard and soft tissues. Titanium is considered highly biocompatible with low corrosion and toxicity, but recent studies indicate that this understanding may be misleading as the properties of the material change drastically when titanium nanoparticles (NPs) are shed from implant surfaces. These NPs are immunogenic and are associated with a macrophage-mediated inflammatory response by the host. The literature discussed in this review indicates that titanium NPs may be shed from implant surfaces at the time of implant placement, under loading conditions, and during implant maintenance procedures. We also discuss the significance of the micro-gap at the implant-abutment interface and the effect of size of the titanium particles on their toxicology. These findings are significant as the titanium particles can have adverse effects on local soft and hard tissues surrounding implants, implant health and prognosis, and even the health of systemic tissues and organs.

Wear of hip prostheses increases serum IGFBP-1 levels in patients with aseptic loosening

The biological mechanisms involved in aseptic loosening include inflammation-associated and bone resorption-associated processes. Coordinated cellular actions result in biochemical imbalances with devastating consequences for the joint. Given that this condition is not known for showing systemic signs, we investigated whether circulating levels of inflammation-related proteins are altered in patients with aseptic loosening. Our study included 37 patients who underwent revision surgery due to hip osteolysis and aseptic loosening and 31 patients who underwent primary total hip arthroplasty. Using antibody arrays, we evaluated the serum levels of 320 proteins in four patients from each group. The results showed differences in insulin-like growth factor-binding protein 1 (IGFBP-1) concentrations, which we then quantified using enzyme-linked immunosorbent assay tests in all study patients. The results confirmed that serum IGFBP-1 concentrations were higher in the revision surgery patients than in the hip arthroplasty patients. In vitro studies showed that exposure of human osteoblasts to titanium particles induced an IGFBP-1 release that further increased when exposure to particles was performed in media conditioned by human M1 macrophages. These findings suggest that elevated serum IGFBP-1 levels in patients with aseptic loosening can arise from increased local IGFBP-1 production in the inflammatory environment of the periprosthetic bed.

Adverse Reaction to Zirconia in a Modern Total Hip Arthroplasty with Ceramic Head

Hypersensitivity reactions to zirconia (ZrO2) or similar ceramics is highly unusual. Owing to the stable oxide formed between the base metal and oxygen, ceramics are considered relatively biologically inert. We report the case of an otherwise healthy 50-year-old woman with a 5-year history of progressively worsening right hip pain who underwent a ceramic-on-polyethylene total hip replacement and subsequently developed hypersensitivity reaction. After metal allergy testing showed her to be highly reactive to zirconium, the femoral head was revised to a custom titanium implant and her symptoms resolved.

Fibroblast-Like-Synoviocytes Mediate Secretion of Pro-Inflammatory Cytokines via ERK and JNK MAPKs in Ti-Particle-Induced Osteolysis

Biomaterials are designed to replace and augment living tissues in order to provide functional support to skeletal deformities. However, wear debris produced from the interfaces of metal implants initiates inflammatory bone loss, causing periprosthetic osteolysis. Lately, fibroblast-like synoviocytes (FLS) have been shown to play a role in wear-debris-induced osteolysis. Thus, here we have tried to understand the underlying mechanism of FLS involvement in wear-debris-induced osteolysis. Our results demonstrate that the effects of Ti particle (1:100 cell-to-Ti particle ratio) on FLS can induce Cox-2 expression and activate NFkB signaling. Moreover, the mRNA expression of pro-inflammatory cytokines such as IL-6, IL-8, IL-11, IL-1β, and TNFα was found to be elevated. However, among these pro-inflammatory cytokines, the mRNA and protein levels of only IL-6, IL-1β, and TNFα were found to be significantly higher. Ti particles activated extracellular signal-regulated kinase (ERK) and c-Jun N-terminal kinase (JNK) mitogen-activated protein kinases (MAPKs) as an early response in FLS. Co-inhibition of ERK and JNK signaling pathways by their specific inhibitors (PD9805 and SP600125, respectively) resulted in the suppression of mRNA and protein levels of IL-6, IL-1β, and TNFα in FLS. Taken together, targeting ERK and JNK MAPKs in FLS might provide a therapeutic option for reducing the secretion of bone-resorbing pro-inflammatory cytokines, thus preventing periprosthetic osteolysis.

The use of bisphosphonates to meet orthopaedic challenges

The anti-resorptive properties of bisphosphonates have been explored to manage several conditions that traditionally have required a surgical solution. In osteonecrosis, their use is predicated on the principle that bone collapse occurs during the revascularisation phase of the disease. If the associated resorptive activity were modulated, the resultant preserved joint architecture may improve clinical outcome and reduce the need for joint replacement. Pre-clinical and small-scale clinical studies have given non-conclusive support for this principle. Adequately powered clinical trials with relevant long-term endpoints are still required to firmly clarify the clinical efficacy of this treatment. Several clinical studies have shown that bisphosphonates can reduce periprosthetic bone loss and, in some situations, enhance implant fixation in the early period after joint replacement. This may be advantageous in settings where osseointegration is problematic. However, the ultimate goals of their use in joint replacement has been to reduce the incidence of late periprosthetic inflammatory osteolysis, the main cause of prosthesis failure. Population-based observational studies have associated bisphosphonate use with a lower incidence of revision surgery, supported by pre-clinical data. However, clinical trials have, to date, failed to demonstrate any efficacy for the human disease. The timing of bisphosphonate administration for secondary prevention after acute osteoporotic fracture has been subject to extensive investigation, with pre-clinical studies showing increased callus formation but decreased remodelling and no effect on the restoration of mechanical integrity of bone. Meta-analysis of clinical trial data indicates that early administration of bisphosphonate after acute fracture does not adversely affect fracture union, pain or functional outcomes. Finally, bisphosphonates have also been explored as a treatment for complex regional pain syndrome type-I. A recent meta-analysis has shown a beneficial effect on visual analogue scale pain scores, but an increase in mild adverse events.

Dual directions to address the problem of aseptic loosening via electrospun PLGA @ aspirin nanofiber coatings on titanium

Peri-implant aseptic inflammation and osteolysis can cause aseptic loosening, leading to the failure of implants. Therefore, aseptic loosening of orthopedic implants remains an imminent problem for the development of durable and effective implants. In this work, a common anti-inflammatory drug (aspirin, ASA) was loaded in poly(lactic-co-glycolic acid) (PLGA) to construct nanofiber coatings on titanium (Ti) via electrospinning. The adhesion of the nanofiber coatings to Ti was ensured by polydopamine (PDA) modification. A stable and sustainable release of aspirin from the nanofiber coatings could last up to 60 days. Such electrospun PLGA@ASA nanofiber coatings could promote proliferation and osteogenic differentiation of bone mesenchymal stem cells (BMSCs) as well as inhibit M1 polarization and RANKL-induced osteoclast differentiation of macrophages in vitro. These results indicated that this facile formulation of the PLGA@ASA nanofiber coatings for long-term drug release could be expected to address the problem of aseptic loosening effectively in dual directions of both anti-inflammation and improving osseointegration simultaneously. Notably, the in vivo experiments demonstrated that PLGA@ASA nanofiber coatings did promote osseointegration ability of Ti implants significantly, even in challenging condition with wear particles, and also effectively inhibited Ti particle induced osteolysis around the implants. This work indicates a promising way for the development of durable and effective implants by using PLGA@ASA-PDA-Ti to address the problem of aseptic loosening in dual directions.

Caffeic Acid Phenethyl Ester Effects: In Silico Study of its Osteoimmunological Mechanisms

Background:

Biological system complexity impedes the drug target identification by biological experiments. Thus drugs, rather than acting on target site only, can interact with the entire biological system. Study of this phenomenon, known as network pharmacology, provides grounds for biological target identification of new drugs or acts as a foundation for the discovery of new targets of present drugs. No publication is available on the interaction network of CAPE.

Aim:

This study was aimed at the investigation of the candidate targets and possible interactions of caffeic acid phenethyl ester (CAPE) involved in its osteoimmunological effects.

Methods:

This study encompasses the investigation of candidate targets and possible interactions of CAPE by analyzing through PASS Prediction and constructing a biological network of CAPE.

Results:

In response to input (CAPE), PASS Prediction generated a network of 1723 targets. While selecting the probability to be active (Pa) value greater than 0.7 brought forth only 27 targets for CAPE. Most of these targets predicted the therapeutic role of CAPE as an osteoimmunological agent. Apart from this, this network pharmacology also identified 10 potential anti-cancer targets for CAPE, out of which 7 targets have been used efficiently in developing potent osteoimmunological drugs.

Conclusion:

This study provides scientific prediction of the mechanisms involved in osteoimmunological effects of CAPE, presenting its promising use in the development of a natural therapeutic agent for the pharmaceutical industry. CAPE targets identified by web-based online databases and network pharmacology need additional in silico assessment such as docking and MD simulation studies and experimental verification to authenticate these results.

Influence of single nucleotide polymorphisms (SNPs) in genetic susceptibility towards periprosthetic osteolysis

Wear debris-induced inflammatory osteolysis remains a significant limiting factor for implant replacement surgeries. Hence, a comprehensive understanding of the complex network of cellular and molecular signals leading to these inflammatory responses is required. Both macrophages and monocytes have a critical role in the instigation of the inflammatory reaction to wear debris but differ in the extent to which they induce cytokine expression in patients. Lately, single nucleotide polymorphisms (SNPs) have been associated with genetic susceptibility among individual patients with implant failure. Studies have shown that SNPs in key pro-inflammatory cytokines and their receptors are associated with osteolytic susceptibility. Likewise, SNPs within several genes involved in the regulation of bone turnover have also been found to be associated with wear debris induced osteolysis. It is presumed that SNP variance might play a decisive role in the activation and signaling of macrophages, osteoblasts, chondrocytes, fibroblasts and other cells involved in inflammatory bone loss. Understanding the extent to which SNPs exist among genes that are responsible for inflammatory bone loss may provide potential targets for developing future therapeutic interventions. Herein, we attempt to summarize the various susceptible genes with possible SNP variance that could contribute to the severity of periprosthetic osteolysis in patients with implants.

LncRNA KCNQ1OT1 ameliorates particle-induced osteolysis through inducing macrophage polarization by inhibiting miR-21a-5p

This study aimed to investigate the mechanism of lncRNA-KCNQ1OT1 on macrophage polarization to ameliorate particle-induced osteolysis. We used polymethylmethacrylate (PMMA) to induce primary bone marrow-derived macrophages (BMMs) obtained from mice and the RAW264.7 cell line, and found that the tumor necrosis factor-alpha (TNF-α) concentration and inducible nitric oxide synthase (iNOS) expression was increased, while interleukin (IL)-10 concentration and Arg1 expression were decreased in PMMA-induced cells. KCNQ1OT1 and IL-10 expression were both suppressed and miR-21a-5p expression was promoted in PMMA-induced cells. Overexpression of KCNQ1OT1 reversed the effect of PMMA on RAW264.7 cells, such as the reduced TNF-α concentration and iNOS expression, and increased IL-10 concentration and Arg1 expression in PMMA-induced cell transfected with pcDNA-KCNQ1OT1. The luciferase assay confirmed that IL-10 is a target of miR-21a-5p. RNA immunoprecipitation (RIP) and RNA pull-down experiments demonstrated that KCNQ1OT1 functions as a miR-21a-5p decoy. Thus, lncRNA KCNQ1OT1 induces M2 macrophage polarization to ameliorate particle-induced osteolysis by inhibiting miR-21a-5p.

Pleomorphic clinical spectrum of metallosis in total hip arthroplasty

PURPOSE

To summarize the biological effects of metal debris from hip arthroplasties which characterize a polymorphic clinical spectrum of local and remote manifestation.

METHODS

Retrospective study. Patient, implant, and surgical characteristics were collected, including implant survival, clinical manifestations, cause of arthroplasty revision or implant failure, and peri- and intra-operative complications. The primary endpoint was implant survivorship. Hip revision arthroplasty was decided considering clinical signs and symptoms, abnormal imaging (XR, MR, TC, echotomography, scintigraphy), and blood metal ion level. An ad hoc electronic form was used to collect demographic, epidemiological, and clinical variables. In-between group comparisons of quantitative variables were performed with the Student t test and the Mann-Whitney for parametric and non-parametric variables, respectively. Logistic regression analyses were carried out to assess the relationship between clinical and radiographic characteristics and stem and cup revision. Radiographic measurements of implant positioning validity and reliability were assessed using Krippendorff's alpha reliability coefficient. The statistical software STATA version 15 (StatsCorp, TX) was used to perform statistical computations.

RESULTS

In this MoM THA series, the most incident cause of implant failure was ARMD in 11 out of 14 (78.6%) patients. All clinical failure manifestations, revision surgery highlights, and intra-operative findings are reported.

CONCLUSIONS

The local adverse reactions include lesions of different clinical relevance from small asymptomatic soft tissue lesions to dramatic osteolysis, necrosis, effusion, and growing masses which can cause secondary pathological effects. Symptoms of systemic toxicity are rarely described but may have been largely unreported in literature. Despite the extensive literature on the topic, the patient's management is still uncertain and challenging. Every metallic implant (e.g., screws, plates, spinal instrumentations) has a potential local or systemic adverse effect. Organizing a national registry of arthroplasty should be mandatory, in order to collect data about the patients, the surgery, the implanted device (with a careful post-marketing tracking), and the follow-up for all the procedures performed at a national level. The data collected in the registry will allow to analyze the implant survival and to better recognize the undesirable and sometimes unexpected effects of different biomaterials on the whole body.

Effects of bisphosphonates in preventing periprosthetic bone loss following total hip arthroplasty: a systematic review and meta-analysis

BACKGROUND

Periprosthetic bone loss following total hip arthroplasty (THA) was a well-known phenomenon. This systematic review was to assess the effectiveness of bisphosphonates (BPs) for decreasing periprosthetic bone resorption.

METHODS

The MEDLINE, EMBASE, and Cochrane Library databases were searched up to March 2018. Randomized controlled trials compared the effects between administrating BPs and placebo or no medication were eligible; the target participants were patients who underwent THA. Mean differences (MD) and 95% confidence interval (95% CI) were calculated by using the random-effects models. Statistical analyses were performed by RevMan 5.3 software.

RESULTS

Fourteen trials involving 620 patients underwent THA were retrieved. BPs significantly prevented the loss of periprosthetic bone mineral density at 1 year (MD, 0.06 [95% CI, 0.03 to 0.08], p < 0.001), between 2 and 4 years (MD, 0.04 [95% CI, 0.01 to 0.07], p = 0.02), and more than 5 years after THA (MD, 0.08 [95% CI, 0.06 to 0.11], p < 0.001). Both serum bone alkaline phosphatase (MD, - 7.28 [95% CI, - 9.81 to - 4.75], p < 0.001) and urinary N-telopeptide of type I collagen (MD, - 24.37 [95% CI, - 36.37 to - 12.37], p < 0.001) in BP group were significantly lower. Subgroup analyses showed that the third-generation BPs were more effective in decreasing periprosthetic bone loss than the first and second generation within 1 year after THA (p = 0.001).

CONCLUSION

BPs were beneficial to decreasing periprosthetic bone loss. The third-generation BPs showed significantly efficacy for patients in short-term observation.

Quantitative evaluation of retrieved reverse total shoulder arthroplasty liner surface deviation and volumetric wear

Polyethylene wear is a known complication in total joint arthroplasty, however, in vivo wear rates in reverse total shoulder arthroplasty (RTSA) remain largely unknown. This study aimed to quantify volumetric and surface deviation changes in retrieved RTSA humeral liners using a novel micro-computed tomography (μCT)-based technique. After IRB-approval, 32 humeral liners (single manufacturer and model) with term-of-service greater than 90 days were analyzed. Clinical demographics and surgical data were collected via chart review. Unworn liners were used as geometric controls. Retrieved and unworn liners underwent μCT scanning. Retrieved liner volumes were isolated, co-registered to controls of matching geometry, and surface deviations of the articulation surface and rim were computed. Differences in total volume loss (TVL), volumetric wear rate (VWR), and surface deviation were reported. Semi-quantitative grading evaluated rim damage presence and severity. Mean term-of-service for all liners was 2.07 ± 1.33 years (range: 0.30-4.73). Mean TVL and VWR were 181.3 ± 208.2 mm³ and 114.5 ± 160.3 mm³ /year, respectively. Mean articulation and rim surface deviations were 0.084 ± 0.065 and 0.177 ± 0.159 mm, respectively. Articulation surface deviation was positively correlated to term-of-service. Rim damage was present on 63% of liners and correlated significantly to rim surface deviation. This study reports in vivo wear rates of retrieved RTSA implants. Our results demonstrate volumetric and articulation surface wear in select RTSA liners that is correlated to term-of-service. Calculation of in vivo wear rates can help bridge the gap between clinical outcomes and experimental models such as wear simulations and computational models. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:2007-2014, 2018.

Systemic and local toxicity of metal debris released from hip prostheses: A review of experimental approaches

Despite the technological improvements in orthopedic joint replacement implants, wear and corrosion products associated with the metal components of these implants may result in adverse local tissue and perhaps systemic reactions and toxicities. The current review encompasses a literature review of the local and systemic toxicity studies concerning the effect of CoCrMo wear debris released from wear and corrosion of orthopedic implants and prostheses. Release of metallic debris is mainly in the form of micro- and nano-particles, ions of different valences, and oxides composed of Co and Cr. Though these substances alter human biology, their direct effects of these substances on specific tissue types remain poorly understood. This may partially be the consequence of the multivariate research methodologies employed, leading to inconsistent reports. This review proposes the importance of developing new and more appropriate in-vitro methodologies to study the cellular responses and toxicity mediated by joint replacement wear debris in-vivo.

Molecular pathology of total knee arthroplasty instability defined by RNA-seq

Total knee arthroplasty (TKA) is a durable and reliable procedure to alleviate pain and improve joint function. However, failures related to flexion instability sometimes occur. The goal of this study was to define biological differences between tissues from patients with and without flexion instability of the knee after TKA. Human knee joint capsule tissues were collected at the time of primary or revision TKAs and analyzed by RT-qPCR and RNA-seq, revealing novel patterns of differential gene expression between the two groups. Interestingly, genes related to collagen production and extracellular matrix (ECM) degradation were higher in samples from patients with flexion instability. Partitioned clustering analyses further emphasized differential gene expression patterns between sample types that may help guide clinical interpretations of this complication. Future efforts to disentangle the effects of physical and biological (e.g., transcriptomic modifications) risk factors will aid in further characterizing and avoiding flexion instability after TKA.

Cobalt and titanium nanoparticles influence on mesenchymal stem cell elasticity and turgidity

Bone cells are damaged by wear particles originating from total joint replacement implants. We investigated Mesenchymal stem cells (MSCs) nanomechanical properties when exposed to cobalt and titanium nanoparticles (resembling wear debris) of different sizes for up to 3days using AFM nanoindentation; along with flow-cytometry and MTT assay. The results demonstrated that cells exposed to increasing concentrations of nanoparticles had a lower value of elasticity and spring constant without significant effect on cell metabolic activity and viability but some morphological alteration (bleeping). Cobalt induced greater effects than titanium and this is consistent with the general knowledge of cyto-compatibility of the later. This work demonstrates for the first time that metal nanoparticles do not only influence MSCs enzymes activity but also cell structure; however, they do not result in full membrane damage. Furthermore, the mechanical changes are concentration and particles composition dependent but little influenced by the particle size.

Evaluation of the Size-Dependent Cytotoxicity of DLC (Diamondlike Carbon) Wear Debris in Arthroplasty Applications

Patients with DLC (diamond like carbon)-coated artificial joints may be exposed to a wide size range of DLC wear debris (DW). In this study, the cytotoxicity of DW of different size ranges (0-0.22, 0.22-0.65, 0.65-1.0, and 1.0-5.0 μm) was evaluated. The microstructure and physical characteristics of DW were investigated by Raman spectroscopy, transmission electron microscopy (TEM), scanning electron microscope (SEM), and dynamic light scattering (DLS). Macrophages, osteoblasts, and fibroblasts were incubated with DW of different size ranges respectively followed by cytotoxicity evaluations of inflammatory cytokines, alkaline phosphatase (ALP) assays, and related signal protein expression analysis. The results showed that, except for the size range of 0-0.22 μm, DW cytotoxicity showed a size-dependent (0.22-5.0 μm) decrease with increasing size. Within the range of 0.22-5.0 μm, DW of larger size resulted in lessened inflammatory response and enhanced osteoblastogenesis and fibrogenesis, with increased viability of cells (macrophages, osteoblasts, and fibroblasts), better morphology, less release of pro-inflammatory factors and more release of anti-inflammatory factors. The results demonstrated that DW sizes below 0.22 μm had less negative effects on cell adhesion and growth because of the BSA (bovine serum albumin) encapsulation effect. These findings provide valuable knowledge about the comprehensive mechanism of promotion of inflammatory response and inhibition of osteoblastogenesis and fibrogenesis induced by DW. In conclusion, an effective system of biocompatibility evaluation for different sizes of DW was derived.

Macrophage integrins modulate response to ultra-high molecular weight polyethylene particles and direct particle-induced osteolysis

Aseptic loosening due to peri-prosthetic osteolysis is one of the primary causes for failure of artificial joint replacements. Implant-derived wear particles, often ultra-high molecular weight polyethylene (UHMWPE) microparticles, initiate an inflammatory cascade upon phagocytosis by macrophages, which leads to osteoclast recruitment and activation, ultimately resulting in osteolysis. Investigation into integrin receptors, involved in cellular interactions with biomaterial-adsorbed adhesive proteins, is of interest to understand and modulate inflammatory processes. In this work, we investigate the role of macrophage integrins Mac-1 and RGD-binding integrins in response to UHMWPE wear particles. Using integrin knockout mice as well as integrin blocking techniques, reduction in macrophage phagocytosis and inflammatory cytokine secretion is demonstrated when these receptors are either absent or blocked. Along this line, various opsonizing proteins are shown to differentially modulate microparticle uptake and macrophage secretion of inflammatory cytokines. Furthermore, using a calvarial osteolysis model it is demonstrated that both Mac-1 integrin and RGD-binding integrins modulate the particle induced osteolysis response to UHMWPE microparticles, with a 40% decrease in the area of osteolysis by the absence or blocking of these integrins, in vivo. Altogether, these findings indicate Mac-1 and RGD-binding integrins are involved in macrophage-directed inflammatory responses to UHMWPE and may serve as therapeutic targets to mitigate wear particle induced peri-prosthetic osteolysis for improved performance of implanted joints.

Mutant CCL2 protein coating mitigates wear particle-induced bone loss in a murine continuous polyethylene infusion model

Wear particle-induced osteolysis limits the long-term survivorship of total joint replacement (TJR). Monocyte/macrophages are the key cells of this adverse reaction. Monocyte Chemoattractant Protein-1 (MCP-1/CCL2) is the most important chemokine regulating trafficking of monocyte/macrophages in particle-induced inflammation. 7ND recombinant protein is a mutant of CCL2 that inhibits CCL2 signaling. We have recently developed a layer-by-layer (LBL) coating platform on implant surfaces that can release biologically active 7ND. In this study, we investigated the effect of 7ND on wear particle-induced bone loss using the murine continuous polyethylene (PE) particle infusion model with 7ND coating of a titanium rod as a local drug delivery device. PE particles were infused into hollow titanium rods with or without 7ND coating implanted in the distal femur for 4 weeks. Specific groups were also injected with RAW 264.7 as the reporter macrophages. Wear particle-induced bone loss and the effects of 7ND were evaluated by microCT, immunohistochemical staining, and bioluminescence imaging. Local delivery of 7ND using the LBL coating decreased systemic macrophage recruitment, the number of osteoclasts and wear particle-induced bone loss. The development of a novel orthopaedic implant coating with anti-CCL2 protein may be a promising strategy to mitigate peri-prosthetic osteolysis.

Effect of low-dose X-ray irradiation and Ti particles on the osseointegration of prosthetic

Low-dose irradiation (LDI) exhibits a positive effect on osteoblasts and inhibitory effect of inflammation. Here, we test the hypothesis that LDI can promote osseointegration and inhibit the inflammatory membrane formation in the presence of titanium (Ti) particles. Endotoxin-free titanium particles were injected into rabbit, prior to the insertion of a Ti6-Al-4-V sticks pre-coated with hydroxyapatite. Two days after operation, both distal femurs of the animal were exposed to 0.5 Gy X-ray irradiation. All ani-mals were euthanized 8 weeks after the operation. The PINP concentration was determined at day 0, 2, 4, and 8 weeks after operation. Trabecular morphology around the implants 8 weeks after operation was assessed using micro-CT, then the maximum push out force of simples was assessed using biomechanics test. Five samples in each group were chosen for bone histomorphology study without decalcification 8 weeks after operation. The results confirmed that the LDI can significantly improve ingrowth of bone into the prosthetic interface and stability of the prosthesis when there was no wear particles. Although promotion effects for bone formation induced by LDI can be counteracted by wear particles, LDI can significantly inhibit the interface membrane formation around the implant induced by wear particles. Based on these results, we conclude that LDI may be useful for enhancing the stability of prosthesis when there are no wear particles and for inhibiting the interface membrane formation during the early stage of aseptic loosening in the presence of wear particles. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1688-1696, 2016.

Modulation of Immune Responses by Particulate Materials

Many biomaterials that are in both preclinical and clinical use are particulate in nature and there is a growing appreciation that the physicochemical properties of materials have a significant impact on their efficacy. The ability of particulates to modulate adaptive immune responses has been recognized for the past century but it is only in recent decades that a mechanistic understanding of how particulates can regulate these responses has emerged. It is now clear that particulate characteristics including size, charge, shape and porosity can influence the scale and nature of both the innate and adaptive immune responses. The potential to tailor biomaterials in order to regulate the type of innate immune response induced, offers significant opportunities in terms of designing systems with increased immune-mediated efficacy.

Contribution of human osteoblasts and macrophages to bone matrix degradation and proinflammatory cytokine release after exposure to abrasive endoprosthetic wear particles

One of the major reasons for failure after total joint arthroplasty is aseptic loosening of the implant. At articulating surfaces, defined as the interface between implant and surrounding bone cement, wear particles can be generated and released into the periprosthetic tissue, resulting in inflammation and osteolysis. The aim of the present study was to evaluate the extent to which osteoblasts and macrophages are responsible for the osteolytic and inflammatory reactions following contact with generated wear particles from Ti-6Al-7Nb and Co-28Cr-6Mo hip stems. To this end, human osteoblasts and THP-1 monocytic cells were incubated with the experimentally generated wear particles as well as reference particles (0.01 and 0.1 mg/ml) for 48 h under standard culture conditions. To evaluate the impact of these particles on the two cell types, the release of different bone matrix degrading matrix metalloproteinases (MMPs), tissue inhibitors of MMPs (TIMPs), and relevant cytokines were determined by multiplex enzyme-linked immunosorbent assays. Following incubation with wear particles, human osteoblasts showed a significant upregulation of MMP1 and MMP8, whereas macrophages reacted with enhanced MMP3, MMP8 and MMP10 production. Moreover, the synthesis of TIMPs 1 and 2 was inhibited. The osteoblasts and macrophages also responded with modified expression of the inflammatory mediators interleukin (IL)-6, IL-8, monocyte chemoattractant protein-1 and vascular endothelial growth factor. These results demonstrate that the release of wear particles affects the release of proinflammatory cytokines and has a negative impact on bone matrix formation during the first 48 h of particle exposure. Human osteoblasts are directly involved in the proinflammatory cascade of bone matrix degradation. The simultaneous activation and recruitment of monocytes/macrophages boosted osteolytic processes in the periprosthetic tissue. By the downregulation of TIMP production and the concomitant upregulation of MMPs as a response to particle exposure, bone formation around implants may be suppressed, resulting in implant failure.

Aging Affects Bone Marrow Macrophage Polarization: Relevance to Bone Healing

Macrophages are an important component of the inflammatory cascade by initiating and modulating the processes leading to tissue regeneration and bone healing. Depending on the local environment, macrophages can be polarized into M1 (pro-inflammatory) or M2 (anti-inflammatory) phenotypes. In order to assess the effects of aging on macrophage function, bone marrow macrophage polarization using primary bone marrow macrophages (BMMs) from young (8 weeks old) and aged (72 weeks old) wild-type male C57BL/6J mice was analyzed. Fluorescence-activated cell sorting (FACS) analysis (CD11b, iNOS, CD206), qRT-PCR (iNOS, TNF-α, CD206, Arginase 1), and ELISA (TNF-α, IL-1ra) were performed to compare the M1 and M2 phenotypic markers in young and aged mouse macrophages. Once M1 and M2 macrophage phenotypes were confirmed, the results showed that TNF-α mRNA was significantly upregulated in aged M1s after interferon gamma (INF-γ) exposure. Arginase 1 and CD206 mRNA expression were still upregulated with IL4 stimulation in aged macrophages, but to a lesser extend than those from younger animals. TNF-α secretion was also significantly increased in aged M1s compared to young M1s, following lipopolysaccharide (LPS) exposure. However, the IL-1ra secretion did not increase accordingly in aged mice. The results demonstrate that, compared to younger animals, aging of bone marrow derived macrophages increases the resting levels of oxidative stress, and the ratios of pro- to anti-inflammatory markers. These age-related changes in macrophage polarization may explain in part the attenuated response to adverse stimuli and delay in processes such as fracture healing seen in the elderly.

LAY SUMMARY

Bone healing is a complex process that involves both biological and mechanical factors. Macrophages are key cells that regulate the events involved in bone healing, especially the initial inflammatory phase. In this biological cascade of events, macrophages present as different functional phenotypes including uncommitted (M0), pro-inflammatory (M1), and anti-inflammatory (M2), a process called macrophage polarization. A clear understanding of the effects of aging on macrophage polarization is critical to modulating adverse events such as fractures, atraumatic bone loss, and tissue regeneration in an aging population.

The biological response to orthopedic implants for joint replacement. II: Polyethylene, ceramics, PMMA, and the foreign body reaction

Novel evidence-based prosthetic designs and biomaterials facilitate the performance of highly successful joint replacement (JR) procedures. To achieve this goal, constructs must be durable, biomechanically sound, and avoid adverse local tissue reactions. Different biomaterials such as metals and their alloys, polymers, ceramics, and composites are currently used for JR implants. This review focuses on (1) the biological response to the different biomaterials used for TJR and (2) the chronic inflammatory and foreign-body response induced by byproducts of these biomaterials. A homeostatic state of bone and surrounding soft tissue with current biomaterials for JR can be achieved with mechanically stable, infection free and intact (as opposed to the release of particulate or ionic byproducts) implants. Adverse local tissue reactions (an acute/chronic inflammatory reaction, periprosthetic osteolysis, loosening and subsequent mechanical failure) may evolve when the latter conditions are not met. This article (Part 2 of 2) summarizes the biological response to the non-metallic materials commonly used for joint replacement including polyethylene, ceramics, and polymethylmethacrylate (PMMA), as well as the foreign body reaction to byproducts of these materials. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1685-1691, 2017.

TNF-α suppression and osteoprotegerin overexpression inhibits wear debris-induced inflammation and osteoclastogenesis in vitro

PURPOSE

Periprosthetic osteolysis, involving RANK/RANKL/osteoprotegerin (OPG) and TNF-α/NFκB signaling, contributes to bone resorption and inflammation. We constructed lentivirus vectors to inhibit TNF-α and enhance OPG expression and assessed their impacts on wear debris-induced inflammation and osteoclastogenesis in an osteoclast/osteoblast coculture system.

METHODS

We transduced mouse osteoblastic MC3T3-E1 cells with Lenti-negative control (Lenti-NC), Lenti-OPG or Lenti-siTNFα-OPG, and murine macrophage/monocyte RAW264.7 cells with Lenti-NC, Lenti-TNF-α siRNA or Lenti-siTNFα-OPG. Then, TNF-α and OPG protein levels were evaluated by enzyme-linked immunosorbent assay. We cocultured transduced MC3T3-E1 and RAW264.7 cells in transwell chambers in the presence of 0.1 mg/mL Ti particles to investigate the capacity of TNF-α inhibition to reduce wear debris-induced inflammation. We also assessed mRNA levels TNF-α, IL-1β, IL-6 and OPG by RT-PCR as well as osteoclastogenesis by tartrate-resistant acid phosphatase.

RESULTS

Lenti-siTNFα-OPG ameliorated Ti-particle-induced expression of TNF-α, IL-1β, IL-6 in MC3T3-E1/RAW264.7 cocultures, while enhancing mRNA and protein levels of OPG, and reducing the fraction of tartrate-resistant acid phosphatase (TRAP)+ cells.

CONCLUSIONS

Lenti-siTNFα-OPG can inhibit the wear debris-induced inflammatory responses and osteoclastogenesis in vitro, and may represent a promising therapeutic candidate for the treatment or prevention of wear particle-induced osteolysis.

Association of Bisphosphonate Use and Risk of Revision After THA: Outcomes From a US Total Joint Replacement Registry

BACKGROUND

Total hip arthroplasty (THA) is often performed in patients who are older and may take bisphosphonates to treat a variety of conditions, most commonly osteoporosis. However, the clinical effects of bisphosphonate use on patients who have undergone THA are not well described.

QUESTIONS/PURPOSES

(1) Is bisphosphonate use in patients with osteoarthritis undergoing primary THA associated with a change in the risk of all-cause revision, aseptic revision, or periprosthetic fracture compared with patients not treated with bisphosphonates? (2) Does the risk of bisphosphonate use and revision and periprosthetic fracture vary by patient bone mineral density and age?

METHODS

A retrospective cohort study of 12,878 THA recipients for the diagnosis of osteoarthritis was conducted; 17.8% of patients were bisphosphonate users. Data sources for this study included a joint replacement registry (93% voluntary participation) and electronic health records and an osteoporosis screening database with complete capture of cases as part of the Kaiser Permanente integrated healthcare system. The endpoints for this study were revision surgery for any cause, aseptic revision, and periprosthetic fracture. The exposure of interest was bisphosphonate use; patients were considered users if prescriptions were continuously refilled for a period equal to or longer than 6 months. Bone quality (based on dual-energy x-ray absorptiometery ordered based on the National Osteoporosis Foundation's clinical guidelines taken within 5 years of the THA) and patient age (< 65 versus ≥ 65 years) were evaluated as effect modifiers. Patient, surgeon, and hospital factors were evaluated as confounders. Cox proportional hazards models were used. Hazard ratios (HRs) and 95% confidence intervals (CIs) were determined.

RESULTS

Age- and sex-adjusted risks of all-cause (HR, 0.50; 95% CI, 0.33-0.74; p < 0.001) and aseptic revision (HR, 0.53; 95% CI, 0.34-0.81; p = 0.004) was lower in bisphosphonate users than in nonusers. The adjusted risk of periprosthetic fractures in patients on bisphosphonates was higher than in patients not on bisphosphonates (HR, 1.92; 95% CI, 1.13-3.27; p = 0.016). Lower risks of all-cause revision and aseptic revision were observed in patients with osteopenia (HR, 0.49; 95% CI, 0.29-0.84; and HR, 0.53; 95% CI, 0.29-0.99, respectively) and osteoporosis (HR, 0.22; 95% CI, 0.08-0.62; and HR, 0.33; 95% CI, 0.11-0.99, respectively).

CONCLUSIONS

Patients considered bisphosphonate users who underwent THA had a lower risk for revision surgery. Bisphosphonate use was associated with a higher risk of periprosthetic fractures in younger patients with normal bone quantity. Evaluation of bone quality and bisphosphonate use for the diagnosis of osteoporosis is encouraged in patients with osteoarthritis who are candidates for primary THA. Further research is required to determine the optimal duration of therapy because long-term bisphosphonate use has been associated with atypical femur fractures.

LEVEL OF EVIDENCE

Level III, therapeutic study.

The Effect of Interferon-γ and Zoledronate Treatment on Alpha-Tricalcium Phosphate/Collagen Sponge-Mediated Bone-Tissue Engineering

Inflammatory responses are frequently associated with the expression of inflammatory cytokines and severe osteoclastogenesis, which significantly affect the efficacy of biomaterials. Recent findings have suggested that interferon (IFN)-γ and zoledronate (Zol) are effective inhibitors of osteoclastogenesis. However, little is known regarding the utility of IFN-γ and Zol in bone tissue engineering. In this study, we generated rat models by generating critically sized defects in calvarias implanted with an alpha-tricalcium phosphate/collagen sponge (α-TCP/CS). At four weeks post-implantation, the rats were divided into IFN-γ, Zol, and control (no treatment) groups. Compared with the control group, the IFN-γ and Zol groups showed remarkable attenuation of severe osteoclastogenesis, leading to a significant enhancement in bone mass. Histomorphometric data and mRNA expression patterns in IFN-γ and Zol-injected rats reflected high bone-turnover with increased bone formation, a reduction in osteoclast numbers, and tumor necrosis factor-α expression. Our results demonstrated that the administration of IFN-γ and Zol enhanced bone regeneration of α-TCP/CS implants by enhancing bone formation, while hampering excess bone resorption.

Joint replacement surgery and the innate immune system

Total joint replacement is a highly successful, cost-effective surgical procedure that relieves pain and improves function for patients with end-stage arthritis. The most commonly used materials for modern joint replacements include metal alloys such as cobalt chrome and titanium alloys, polymers including polymethylmethacrylate and polyethylene, and ceramics. Implantation of a joint prosthesis incites an acute inflammatory reaction that is regulated by the innate immune system, a preprogrammed non-antigen specific biological response composed of cells, proteins, and other factors. This "frontline" immune mechanism was originally designed to combat invading microorganisms, but now responds to both pathogen-associated molecular patterns or PAMPS (by-products from microorganisms), and damage associated molecular patterns or DAMPS (molecular by-products from cells), via pattern recognition receptors (PRRs). In this way, potentially injurious stimuli that might disrupt the normal homeostatic regulatory mechanisms of the organism are efficiently dealt with, ensuring the survival of the host. Initial surgical implantation of the joint replacement, as well as ongoing generation of wear debris and byproducts during usage of the joint, activates the innate immune system. Understanding and potentially modulating these events may lead to improved function and increased longevity of joint replacements in the future.

Caffeic acid phenethyl ester abrogates bone resorption in a murine calvarial model of polyethylene particle-induced osteolysis

Particle-induced bone loss by osteoclasts is a common cause of aseptic loosening around implants. This study investigates whether caffeic acid phenethyl ester (CAPE), a potent and specific inhibitor of nuclear factor of activated T cells, cytoplasmic, calcineurin-dependent 1 and nuclear factor kappa B, at a low dose reduces bone resorption in a murine calvarial model of polyethylene (PE) particle-induced osteolysis. The effects of particles and CAPE treatment on gastrointestinal tract (GIT) histopathology were also evaluated. Mice were scanned using in vivo animal micro-computed tomography (μCT) as a baseline measurement. PE particles (2.82 × 10(9) particles/mL) were implanted over the calvariae on day 0. CAPE was administered subcutaneously (1 mg/kg/day) at days 0, 4, 7 and 10. Mice were killed at day 14 and serum was analysed for Type-1 carboxyterminal collagen crosslinks (CTX)-1 and osteoclast-associated receptor (OSCAR) levels. Ex vivo μCT scans were conducted to assess bone volume (BV) change and percentage area of calvarial surface resorbed. Calvarial and GIT tissue was processed for histopathology. By day 14, PE particles significantly induced calvarial bone loss compared with control animals as evidenced by resorption areas adjacent to the implanted PE in three-dimensional μCT images, an increase in percentage of resorbed area (p = 0.0022), reduction in BV (p = 0.0012) and increased Tartrate-resistant acid phosphatase positive cells. Serum CTX-1 (p = 0.0495) and OSCAR levels (p = 0.0006) significantly increased in the PE implant group. CAPE significantly inhibited PE particle-induced calvarial osteolysis, as evidenced by a significant reduction in surface bone resorption (p = 0.0012) and volumetric change (p = 0.0154) compared with PE only, but had no effect on systemic CTX-1. Neither particles nor CAPE had an effect on GIT histopathology.

Parthenolide reduces empty lacunae and osteoclastic bone surface resorption induced by polyethylene particles in a murine calvarial model of peri-implant osteolysis

The study aimed to determine the effects of parthenolide (PAR) on bone volume (BV) and bone surface resorption as assessed by live-animal microcomputed tomography (μCT) and possible osteocyte death as indicated by empty lacunae histologically in polyethylene (PE) particle-induced calvarial osteolysis in mice. Baseline μCT scans were conducted 7 days preimplantation of 2 × 10(8) PE particles/mL over the calvariae (day 0). PAR at 1 mg/kg/day was subcutaneously injected on days 0, 4, 7, and 10. At day 14, BV and surface resorption was analyzed with μCT. Calvarial tissue was processed for histomorphometric osteocyte evaluation. Serum was analyzed for type-1 carboxy-terminal collagen crosslinks (CTX-1) and osteoclast associated receptor (OSCAR) levels by ELISA. PE significantly decreased BV (p = 0.0368), increased surface bone resorption area (p = 0.0022), and increased the percentage of empty lacunae (p = 0.0043). Interestingly, PAR significantly reduced the resorption surface area (p = 0.0022) and the percentage of empty osteocyte lacunae (p = 0.0087) in the PE-calvariae, but it did not affect BV, serum CTX-1 or OSCAR levels. The ability of PAR to inhibit PE-induced surface bone erosion may better reflect the in vivo situation, where bone resorption occurs on the surface at the bone-implant interface and may also be related to the role of osteocytes in this pathology.

Genetic variation in inflammatory and bone turnover pathways and risk of osteolytic responses to prosthetic materials

Wear particle-induced inflammatory bone loss (osteolysis) is the leading cause of total hip arthroplasty (THA) failure. Individual susceptibility to osteolysis is modulated by genetic variation. In this 2-stage case-control association study we examined whether variation within candidate genes in inflammatory and bone turnover signaling pathways associates with susceptibility to osteolysis and time to prosthesis failure. We examined two cohorts, comprising 758 (347 male) Caucasian subjects who had undergone THA with a metal on polyethylene bearing couple; 315 of whom had developed osteolysis. Key genes within inflammatory, bone resorption, and bone formation pathways were screened for common variants by pairwise-SNP tagging using a 2-stage association analysis approach. In the discovery cohort four SNPs within RANK, and one each within KREMEN2, OPG, SFRP1, and TIRAP (p < 0.05) were associated with osteolysis susceptibility. Two SNPs within LRP6, and one each within LRP5, NOD2, SOST, SQSTM1, TIRAP, and TRAM associated with time to implant failure (p < 0.05). Meta-analysis of the two cohorts identified four SNPs within RANK, and one each within KREMEN2, OPG, SFRP1, and TIRAP associated with osteolysis susceptibility (p < 0.05). Genetic variation within inflammatory signaling and bone turnover pathways may play a role in susceptibility to osteolysis.

Effect of particle agglomeration in nanotoxicology

The emission of engineered nanoparticles (ENPs) into the environment in increasing quantity and variety raises a general concern regarding potential effects on human health. Compared with soluble substances, ENPs exhibit additional dimensions of complexity, that is, they exist not only in various sizes, shapes and chemical compositions but also in different degrees of agglomeration. The effect of the latter is the topic of this review in which we explore and discuss the role of agglomeration on toxicity, including the fate of nanomaterials after their release and the biological effects they may induce. In-depth investigations of the effect of ENP agglomeration on human health are still rare, but it may be stated that outside the body ENP agglomeration greatly reduces human exposure. After uptake, agglomeration of ENPs reduces translocation across primary barriers such as lungs, skin or the gastrointestinal tract, preventing exposure of "secondary" organs. In analogy, also cellular ENP uptake and intracellular distribution are affected by agglomeration. However, agglomeration may represent a risk factor if it occurs after translocation across the primary barriers, and ENPs are able to accumulate within the tissue and thus reduce clearance efficiency.

Do genetic susceptibility, Toll-like receptors, and pathogen-associated molecular patterns modulate the effects of wear?

Overwhelming evidence supports the concept that wear particles are the primary initiator of aseptic loosening of orthopaedic implants. It is likely, however, that other factors modulate the biologic response to wear particles. This review focuses on three potential other factors: genetic susceptibility, Toll-like receptors (TLRs), and bacterial pathogen-associated molecular patterns (PAMPs). WHERE ARE WE NOW?: Considerable evidence is emerging that both genetic susceptibility and TLR activation are important factors that modulate the biologic response to wear particles, but it remains controversial whether bacterial PAMPs also do so. WHERE DO WE NEED TO GO?: Detailed understanding of the roles of these other factors may lead to identification of novel therapeutic targets for patients with aseptic loosening. HOW DO WE GET THERE?: Highest priority should be given to polymorphism replication studies with large numbers of patients and studies to replicate the reported correlation between bacterial biofilms and the severity of aseptic loosening.

Are biologic treatments a potential approach to wear- and corrosion-related problems?

WHERE ARE WE NOW?: Biological treatments, defined as any nonsurgical intervention whose primary mechanism of action is reducing the host response to wear and/or corrosion products, have long been postulated as solutions for osteolysis and aseptic loosening of total joint arthroplasties. Despite extensive research on drugs that target the inflammatory, osteoclastic, and osteogenic responses to wear debris, no biological treatment has emerged as an approved therapy. We review the extensive preclinical research and modest clinical research to date, which has led to the central conclusion that the osteoclast is the primary target. We also allude to the significant changes in health care, unabated safety concerns about chronic immunosuppressive/antiinflammatory therapies, industry's complete lack of interest in developing an intervention for this condition, and the practical issues that have narrowly focused the possibilities for a biologic treatment for wear debris-induced osteolysis. WHERE DO WE NEED TO GO?: Based on the conclusions from research, and the economic, regulatory, and practical issues that limit the future directions toward the development of a biologic treatment, there are a few rational approaches that warrant investigation. These largely focus on FDA-approved osteoporosis therapies that target the osteoclast (bisphosphonates and anti-RANK ligand) and recombinant parathyroid hormone (teriparatide) prophylactic treatment to increase osseous integration of the prosthesis to overcome high-risk susceptibility to aseptic loosening. The other roadblock that must be overcome if there is to be an approved biologic therapy to prevent the progression of periprosthetic osteolysis and aseptic loosening is the development of radiological measures that can quantify a significant drug effect in a randomized, placebo-controlled clinical trial. We review the progress of volumetric quantification of osteolysis in animal studies and clinical pilots. HOW DO WE GET THERE?: Accepting the aforementioned rigid boundaries, we describe the emergence of repurposing FDA-approved drugs for new indications and public (National Institutes of Health, FDA, Centers for Disease Control and Prevention) and private (universities and drug and device manufactures) partnerships as the future roadmap for clinical translation. In the case of biologic treatments for wear debris-induced osteolysis, this will involve combined federal and industry funding of multicenter clinical trials that will be run by thought leaders at large medical centers.

Cytotoxic effects of cobalt and nickel ions on osteocytes in vitro

BACKGROUND

Metal-on-metal prostheses undergo wear and corrosion, releasing soluble ions and wear particles into the surrounding environment. Reports described early failures of the metal-on-metal prostheses, with histologic features similar to a Type IV immune response. Mechanisms by which metal wear products and metal ion causing this reaction are not completely understood, and the effects of metal ions on osteocytes, which represent more than 95% of all the bone cells, have not been also studied. We hypothesized that soluble metal ions released from the cobalt-chromium-molybdenum (Co-Cr-Mo) prosthesis may have cytotoxic effect on osteocytes.

METHODS

MLO-Y4 osteocytes were treated with various metal ion solutions for 24 and 48 h. The effect of ion treatment on cytotoxicity was assessed by WST-1 reagents and cell death ELISA. Morphological changes were analyzed by a phase-contrast microscope or fluorescent microscope using Hoechst 33342 and propidium iodine staining.

RESULTS

Cr and Mo ions did not cause cell death under 0.50 mM, highest concentration studied, whereas Co and Ni ions had significant cytotoxic effect on MLO-Y4 cells at concentrations grater than 0.10 mM and at 0.50 mM, respectively, in a dose-dependent manner. According to the ELISA data, osteocytes treated with Co ions were more susceptible to necrotic than apoptotic cell death, while Ni ions caused osteocyte apoptosis. The morphological assays show that cells treated with Co and Ni ions at high concentration were fewer in number and rounded. In addition, fluorescent images showed a marked reduction in live cells and an increase in dead osteocytes treated with Co and Ni ions at high concentration.

CONCLUSIONS

Metal ions released from metal-on-metal bearing surfaces have potentially cytotoxic effects on MLO-Y4 osteocytes, in vitro.

Metallic wear debris may regulate CXCR4 expression in vitro and in vivo

CXCR4, the chemokine receptor for CXCL12, also known as SDF-1 (stromal cell derived factor-1), has been shown to play a pivotal role in bone metastasis, inflammatory, and autoimmune conditions but has not been investigated in periprosthetic osteolysis. We co-cultured osteoblast-like cells with increasing concentrations of metallic (Co-35Ni-20Cr-10Mo and Co-28Cr-6Mo) and Co-ions simulating wear debris. Real-time polymerase chain reaction (RT-PCR) and Western blotting were used to quantify gene and protein expression of CXCR4. The expression of tumor necrosis factor-alpha (TNF-α) and the effects of AMD3100 (bicyclam) on both CXCR4 and TNF-α expression among these cells was investigated. RT-PCR showed an increase in CXCR4 mRNA (7.5-fold for MG63 and 4.0-fold for SaOs-2 cells) among cells co-cultured with metal alloy particles. Western blotting showed a time-dependent increase in protein expression of CXCR4. The attempted blockade of CXCR4 by its known competitive receptor agonist AMD3100 led to a significant inhibition TNF-α mRNA expression. Immunohistochemistry showed CXCR4 positivity among patients with failed metal-on-metal hip replacements and radiographic evidence of osteolysis. Our data collectively suggest that the CXCR4 chemokine is upregulated in a dose- and time-dependent manner in the presence of metallic wear debris.

Alternative strategies to manipulate fibrocyte involvement in the fibrotic tissue response: pharmacokinetic inhibition and the feasibility of directed-adipogenic differentiation

Fibrocytes have previously been identified as important mediators in several inflammatory and fibrotic diseases. However, there is no effective treatment thus far to reduce fibrotic tissue responses without affecting wound healing reactions. Here we investigate two strategies to alleviate fibrocyte interactions at the biomaterial interface, reducing collagen production and scar tissue formation. First, in an indirect approach, TGF-β inhibitor-SB431542 and IL-1β/TNF-α inhibitor SB203580 were locally released from scaffold implants to block their respective signaling pathways. We show that the inhibition of IL-1β/TNF-α has no influence on overall fibrotic tissue reactions to the implants. However, the reduction of localized TGF-β significantly decreases the fibrocyte accumulation and myofibroblast activation while reducing the fibrotic tissue formation. Since fibrocytes can be differentiated into non-fibrotic cell types, such as adipocytes, we further sought a more direct approach to reduce fibrocyte responses by directing fibrocyte differentiation into adipocytes. Interestingly, by initiating fibrocyte-to-adipocyte differentiation through sustained differentiation cocktail release, we find that adipogenic differentiation forces incoming fibrocytes away from the traditional myofibroblast lineage, leading to a substantial reduction in the collagen formation and fibrotic response. Our results support a novel and effective strategy to improve implant safety by reducing implant-associated fibrotic tissue reactions via directing non-fibrotic differentiation of fibrocytes.

Novel biological strategies for treatment of wear particle-induced periprosthetic osteolysis of orthopaedic implants for joint replacement

Wear particles and by-products from joint replacements and other orthopaedic implants may result in a local chronic inflammatory and foreign body reaction. This may lead to persistent synovitis resulting in joint pain and swelling, periprosthetic osteolysis, implant loosening and pathologic fracture. Strategies to modulate the adverse effects of wear debris may improve the function and longevity of joint replacements and other orthopaedic implants, potentially delaying or avoiding complex revision surgical procedures. Three novel biological strategies to mitigate the chronic inflammatory reaction to orthopaedic wear particles are reported. These include (i) interference with systemic macrophage trafficking to the local implant site, (ii) modulation of macrophages from an M1 (pro-inflammatory) to an M2 (anti-inflammatory, pro-tissue healing) phenotype in the periprosthetic tissues, and (iii) local inhibition of the transcription factor nuclear factor kappa B (NF-κB) by delivery of an NF-κB decoy oligodeoxynucleotide, thereby interfering with the production of pro-inflammatory mediators. These three approaches have been shown to be viable strategies for mitigating the undesirable effects of wear particles in preclinical studies. Targeted local delivery of specific biologics may potentially extend the lifetime of orthopaedic implants.