Molecular dynamics simulations of T-2410 and T-2429 HIV fusion inhibitors interacting with model membranes: Insight into peptide behavior, structure and dynamics

T-2410 and T-2429 are HIV fusion inhibitor peptides (FI) designed to present a higher efficiency even against HIV strains that developed resistance against other FIs. Similar peptides were shown to interact with model membranes both in the liquid disordered phase and in the liquid ordered state. Those results indicated that such interaction is important to function and could be correlated with their effectiveness. Extensive molecular dynamics simulations were carried out to investigate the interactions between both T-2410 and T-2429 with bilayers of pure 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC) and a mixture of POPC/cholesterol (Chol) (1:1). It was observed that both peptides interact strongly with both membrane systems, especially with the POPC/Chol systems, where these peptides show the highest number of H-bonds observed so far. T-2410 and T-2429 showed higher extent of interaction with bilayers when compared to T-20 or T-1249 in previous studies. This is most notable in POPC/Chol membranes where, although able to form H-bonds with Chol, they do so to a lesser extent than T-1249 does, the latter being the only FI peptide so far that was observed to form H-bonds with Chol. This behavior suggests that interaction of FI peptides with rigid Chol rich membranes may not be as dependent from peptide/Chol H-bond formation as previous results of T-1249 behavior led to believe. As in other similar peptides, the higher ability to interact with membranes shown by T-2410 and T2429 is probably correlated with its higher inhibitory efficiency.

Mechanisms of removal of three widespread pharmaceuticals by two clay materials

Pharmaceutical residues presence in the environment is among nowadays top emergent environmental issues. For removal of such pollutants, adsorption is a generally efficient process that can be complementary to conventional treatment. Research of cheap, widely available adsorbents may make this process economically attractive. The aim of the present work was to evaluate the capacity of two clay materials (exfoliated vermiculite, LECA) to adsorb gemfibrozil, mefenamic acid and naproxen in lab-scale batch assays. Results show that both adsorbents are able to remove the pharmaceuticals from aqueous medium. Although vermiculite exhibited higher adsorption capacities per unit mass of adsorbent, LECA yielded higher absolute removals of the pharmaceuticals due to the larger mass of adsorbent. Quantum chemistry calculations predicted that the forms of binding of the three molecules to the vermiculite surface are essentially identical, but the adsorption isotherm of naproxen differs substantially from the other two's. The linear forms of the latter impose limits at lower concentrations to the removal efficiencies of these pharmaceuticals by vermiculite, thereby electing LECA as more efficient. Notwithstanding, vermiculite's high specific adsorption capacity and also its much faster adsorption kinetics suggest that there may be some benefits in combining both materials as a composite adsorbent solution.

Constructed wetlands with light expanded clay aggregates for agricultural wastewater treatment

Constructed wetlands (CWs) are receiving a renewed attention as a viable phytotechnology for treating agricultural wastewaters and for the removal of more specific pollutants, in particular recalcitrant ones. In this work, the performance of CW mesocosms using light expanded clay aggregates (LECA) as the bed's substrate and planted with Phragmites australis was investigated for treatment of olive mill wastewater (OMW), swine wastewater (SW) contaminated with oxytetracycline and water contaminated with herbicide MCPA (2-methyl-4-chlorophenoxyacetic acid). Both wastewaters (OMW and SW) initially presented high organic matter content and total suspended solids which were removed by the system with efficiencies higher than 80%. Removal of polyphenols in OMW and nitrogen compounds in SW also showed similar or higher efficiencies in comparison with other treatment systems reported in the literature. The antibiotic oxytetracycline was completely removed from SW within the assay period in unplanted LECA beds, but planted beds allowed a significantly faster removal. In regard to water contaminated with MCPA, the results showed that LECA has a large sorption capacity for this herbicide (removal efficiencies of 56-97%). In general, considerably higher pollutant removal efficiencies were obtained when plants were used (up to 28% higher). The results obtained are indicative that CWs with LECA as substrate may be an adequate option for agricultural wastewater treatment.

Organic xenobiotics removal in constructed wetlands, with emphasis on the importance of the support matrix

Constructed wetlands (CWs) are increasingly popular as an efficient and economical alternative to conventional wastewater treatment processes for removal, among other pollutants, of organic xenobiotics. In CWs, pollutants are removed through the concerted action of their components, whose contribution can be maximized by careful selection of those components. Specifically for non-biodegradable organic pollutants, the materials used as support matrix of CWs can play a major role through sorption phenomena. In this review the role played by such materials in CWs is examined with special focus on the amount of research that has been conducted to date on their sorption properties relatively to organic compounds. Where available, the reports on the utilization of some of those materials on pilot or full-scale CWs are also recognized. Greatest interest has been directed to cheaper and widely available materials. Among these, clays are generally regarded as efficient sorbents, but materials originated from agricultural wastes have also gained recent popularity. Most available studies are lab-scale batch sorption experiments, whereas assays performed in full-scale CWs are still scarce. However, the available lab-scale data points to an interesting potential of many of these materials for experimentation as support matrix of CWs targeted for organic xenobiotics removal.

Evaluation of carbamazepine uptake and metabolization by Typha spp., a plant with potential use in phytotreatment

Phytoremediation technologies such as constructed wetlands have shown higher efficiencies in removal of pharmaceuticals from wastewaters than conventional wastewater treatment processes, and plants seem to have an important role in the removal of some of those compounds. In this context, a study was conducted to assess tolerance, uptake, and metabolism of the epilepsy drug, carbamazepine, by the macrophyte Typha spp. This evaluation was conducted in hydroponic solutions with 0.5-2.0mg/L of this pharmaceutical for a maximum period of 21 days. The removal of carbamazepine from nutrient solutions by the plants reached values of 82% of the initial contents. Furthermore, a metabolite (10,11-dihydro-10,11-epoxycarbamazepine) was detected in leaf tissues indicating carbamazepine translocation and metabolism inside plants. Activities of antioxidant enzymes catalase, superoxide dismutase, and guaiacol peroxidase generally increase (after some mild initial inhibition in the case of the latter enzyme) as result of the abiotic stress caused by the exposure to carbamazepine, but ultimately Typha seemed able to cope with its toxicity. The results obtained in this study suggest the ability of Typha spp., to actively participate in the removal of carbamazepine from water when used in phytotreatment systems.

Removal of pharmaceuticals in microcosm constructed wetlands using Typha spp. and LECA

Microcosm constructed wetlands systems established with a matrix of light expanded clay aggregates (LECA) and planted with Typha spp. were used to evaluate their ability to remove pharmaceuticals ibuprofen, carbamazepine and clofibric acid from wastewaters. Seasonal variability of these systems' performances was also evaluated. Overall, removal efficiencies of 96%, 97% and 75% for ibuprofen, carbamazepine and clofibric acid, respectively, were achieved under summer conditions after a retention time of 7 days. In winter, a maximum loss of 26% in removal efficiency was observed for clofibric acid. Removal kinetics was characterized by a fast initial step (>50% removal within 6h) mainly due to adsorption on LECA but, on a larger timescale, plants also contributed significantly to the system's performance. Despite the fact that further tests using larger-scale systems are required, this study points to the possible application of these low-cost wastewater treatment systems for dealing with pharmaceuticals contaminated wastewater.

Toxicity and removal efficiency of pharmaceutical metabolite clofibric acid by Typha spp.--potential use for phytoremediation?

A study was conducted to assess Typha spp.'s ability to withstand and remove, from water, a metabolite of blood lipid regulator drugs, clofibric acid (CA). At a concentration of 20 microg L(-1), Typha had removed >50% of CA within the first 48h, reaching a maximum of 80% by the end of the assay. Experimental conditions assured that photodegradation, adsorption to vessel walls and microbial degradation did not contribute to the removal. Exposure to higher CA concentrations did not affect Typha's photosynthetic pigments but the overall increase in enzyme activity (ascorbate and guaiacol peroxidases, catalase, superoxide dismutase) indicates that both roots and leaves were affected by the xenobiotic. Eventually, Typha seemed able to cope with the CA's induced oxidative damage suggesting its ability for phytoremediation of CA contaminated waters.

Selection of a support matrix for the removal of some phenoxyacetic compounds in constructed wetlands systems

The efficiency of constructed wetlands systems in the removal of pollutants can be significantly enhanced by using a support matrix with a greater capacity to retain contaminants by sorption phenomena, ionic exchange or other physico-chemical processes. The aim of this work was to evaluate the efficiencies of 3 different materials, Light Expanded Clay Aggregates [LECA] (in two different particle sizes), Expanded Perlite and Sand, for the removal from water of one pharmaceutical compound (clofibric acid) and one pesticide (MCPA). Both belong to the class of phenoxyacetic compounds. In addition, relationships were established between the compounds' removal efficiencies and the physico-chemical properties of each material. LECA exhibited a high sorption capacity for MCPA, while the capacity for clofibric acid was more modest, but still significant. In contrast, perlite had a very limited sorption capacity while sand did not exhibit any sorption capacity for any of the compounds. LECA with smaller particle sizes showed higher efficiencies than larger grade LECA and can achieve efficiencies near 100% for the lower concentrations in the order of 1 mg l(-1). However, the use of these smaller particle media at larger scales may present problems with hydraulic conductivities. The results show that expanded clay presents important advantages in laboratory studies and could be used as a filter medium or a support matrix in constructed wetlands systems.

Adsorption of normal pentane on the surface of rutile. Experimental results and simulations

Adsorption isotherms and differential heats of normal pentane adsorption on microcrystalline rutile were measured at 303 K. The heat of adsorption of n-pentane on rutile at zero occupancy is 64 kJ/mol. The differential heats have three descending segments, corresponding to the adsorption of n-pentane on three types of surfaces. At low coverage (first segment), the adsorption is restricted to the rows A of the (110) faces along the 5-fold coordinatively unsaturated (cus) Ti(4+) ions with differential heat showing a linear decrease with increasing occupancy. The second segment is attributed to bonding with atoms of the rows along the remaining faces exposed, (101) and (100). The third segment is related to a multilayer adsorption. The mean molar adsorption entropy of n-pentane is ca. -25 J/mol K less than the entropy of the bulk liquid, thus revealing a hindered state of motion of the n-pentane molecules on the surface of rutile. Simulations of the adsorption of n-pentane on the three most abundant crystallographic faces of rutile were also performed. The adsorption isotherm obtained from the combination of each face's isotherm weighted by the respective abundance was found to be in a good agreement with the experimental data. A structural characterization of n-pentane near the surface was also conducted, and it was found that the substrate, especially for the (110) face, strongly perturbs the distribution of n-pentane conformations, compared to those found for the gas phase. Adsorbed molecules are predominantly oriented with their long axes and their backbone zigzag planes parallel to the surface and are also characterized by fewer gauche conformations than observed in the bulk phase.

Excess Thermodynamics of Mixtures Involving Xenon and Light Linear Alkanes by Computer Simulation

Excess molar enthalpies and excess molar volumes as a function of composition for liquid mixtures of xenon + ethane (at 161.40 K), xenon + propane (at 161.40 K) and xenon + n-butane (at 182.34 K) have been obtained by Monte Carlo computer simulations and compared with available experimental data. Simulation conditions were chosen to closely match those of the corresponding experimental results. The TraPPE-UA force field was selected among other force fields to model all the alkanes studied, whereas the one-center Lennard-Jones potential from Bohn et al. was used for xenon. The calculated H(m)(E) and V(m)(E) for all systems are negative, increasing in magnitude as the alkane chain length increases. The results for these systems were compared with experimental data and with other theoretical calculations using the SAFT approach. An excellent agreement between simulation and experimental results was found for xenon + ethane system, whereas for the remaining two systems, some deviations that become progressively more significant as the alkane chain length increases were observed.