High-magnification Faraday rotation imaging and analysis of X-pinch implosion dynamics

An X-pinch load driven by an intense current pulse (>100 kA in ∼100 ns) can result in the formation of a small radius, runaway compressional micro-pinch. A micro-pinch is characterized by a hot (>1 keV), current-driven (>100 kA), high-density plasma column (near solid density) with a small neck diameter (1-10 µm), a short axial extent (<1 mm), and a short duration (≲1 ns). With material pressures often well into the multi-Mbar regime, a micro-pinch plasma often radiates an intense, sub-ns burst of sub-keV to multi-keV x rays. A low-density coronal plasma immediately surrounding the dense plasma neck could potentially shunt current away from the neck and thus reduce the magnetic drive pressure applied to the neck. To study the current distribution in the coronal plasma, a Faraday rotation imaging diagnostic (1064 nm) capable of producing simultaneous high-magnification polarimetric and interferometric images has been developed for the MAIZE facility at the University of Michigan. Designed with a variable magnification (1-10×), this diagnostic achieves a spatial resolution of ∼35 µm, which is useful for resolving the ∼100-μm-scale coronal plasma immediately surrounding the dense core. This system has now been used on a reduced-output MAIZE (100-200 kA, 150 ns) to assess the radial distribution of drive current immediately surrounding the dense micro-pinch neck. The total current enclosed was found to increase as a function of radius, r, from a value of ≈50±25 kA at r ≈ 140 µm (at the edge of the dense neck) to a maximal value of ≈150±75 kA for r ≥ 225 µm. This corresponds to a peak magnetic drive pressure of ≈75±50 kbar at r ≈ 225 µm. The limitations of these measurements are discussed in the paper.

Carbon Footprint of Photon Therapy

PURPOSE/OBJECTIVE(S)

Rising carbon dioxide levels have hazardous impact on human health and climate change. This study estimates the energy utilization of radiation therapy and estimates corresponding carbon footprint.

MATERIALS/METHODS

Patients treated between 07/2020 and 06/2021 using a Varian LINAC system were evaluated. Power draw was directly measured in 1 second increments, from the LINAC machine and the radiation department facility. Patients treated were reviewed for number of fractions and beam duration during each fraction. kWh power consumption was calculated per fraction and per treatment course. Patient commute distance was evaluated using Google Maps. EPA calculator was used to calculate CO2 equivalent (CO2e) footprint.

RESULTS

There were 176 patients treated for 191 treatment courses. Total of 4,517 fractions were delivered (avg 23.6, range 1 to 48). Average BeamOn time was 141 seconds per fraction (22 to 310 sec); electron plans (n = 8) 29 sec, 2D/3D (n = 63) 77 sec, and IMRT (n = 120) 182 sec. BeamOn power draw was ∼36.3 kW. Power consumption per fraction was 1.4 kWh (0.2 to 3.0 kWh), and per course 37.5 kWh (0.9 to 109.1 kWh). LINAC was otherwise in standby mode 71% of time (∼7.3 kW) and ON/ready mode 25% (∼12.5 kW). Patient BeamOn time accounted for 2% of total its time and 8% of its power use during the year. Incremental standby/ready energy contribution per treatment course was 410 kWh (78,332/191). The building power draw was 12.5 kW, for incremental contribution of 576 kWh per course. Average patient travel distance was 9.6 miles (0.7 miles to 73.5 miles), resulting in 711-mile round trip per course (6 miles to 5620 miles). Corresponding carbon footprint for BeamOn time was 0.6 kg CO2e per fraction (electrons 0.1 kg, 2D/3D 0.3 kg, and IMRT 1.1 kg per fx). The treatment course footprint was 16.2 kg CO2e (0.4 kg to 47.2 kg). The attributed standby/ready LINAC footprint was 177.8 kg CO2e per course. The attributed facility footprint was further 250.0 kg CO2e per course. The attributed commute footprint was further 286.3 kg CO23 per course (2.4 kg to 2264.0 kg). The entire treatment course was 730.4 kg CO2e. As such, single fraction was 0.1% of the total CO2e course (0.01% to 0.27%), BeamOn was 2.3% (0.1% to 7.1%), LINAC standby/ready was 28.0% (6.5% to 41.3%), building was 39.4% (9.2% to 58%), and commute was 30.3% (0.6% to 82.9%). The entire program generated 139.5 metric tons of CO2e during the year.

CONCLUSION

Linear accelerator BeamOn carbon footprint varied as a function of technique but was only 2% of the overall patient treatment footprint. The LINAC standby electricity contributed 28%, building electricity 39%, and commute 30%, though this varied significantly per patient, as a function of number of fractions and treatment distance. Fixed CO2e contribution from the standby LINAC and the building draw accounted for ∼67% of the footprint. However, radiation oncologists can potentially impact the overall carbon footprint by prescribing fewer fractions to lower total commute, as clinically indicated.

Defining the Role of Intensity Modulation in Electron Conformal Therapy for the Treatment of Head and Neck Cancer

PURPOSE/OBJECTIVE(S)

The use of bolus electron conformal therapy (BECT) in the treatment of cancers of the head and neck is often limited by an inability to reduce dosimetric hot spots resulting from surface or tissue heterogeneity. In this study, we examined the potential benefits of using a recently patented, low-cost form of Intensity Modulation for electron therapy (IM-BECT) to reduce treatment hotspots in patients undergoing electron beam therapy for cancer of the Head and Neck (HN).

MATERIALS/METHODS

The treatment plans from twelve patients with HN cancer previously treated with BECT were identified (treatment energies ranged from 6-18 MeV and field sizes of 36-625 cm2). Each case included the treatment targets and at least one primary OAR that were defined by the original treating radiation oncologist. Additionally, a target + 2 cm rind structure was created for analysis of the dose deposition in areas immediately surrounding the target volume as a measure of conformality. Each patient plan was transferred into a novel IM-BECT planning software and each case was recomputed as per the original prescription, gantry, couch, collimator angles, and original clinically used bolus. Next, each case was replanned with the inclusion of intensity modulation, as well as a new custom conformal bolus that was designed for optimized range compensation. The patient plans were then normalized such that 100% equals the prescription dose value and then transferred to a plan analysis software for comparison of the target coverage/dose and OAR dose.

RESULTS

Comparison of the BECT and IM-BECT treatment plans demonstrated that IM-BECT was able to significantly reduce dosimetric hotspots for this cohort of patients undergoing radiation therapy for HN cancer, bringing the average maximum dose down from 130.6% to only 120.6% (p = 0.044, paired t-test). Moreover, the impact of IM-BECT appeared to be most substantial in the patients with the highest baseline maximum dose. For patients who had a hotspot of 125% or greater, the hotspot was on average reduced by 19%. Further dosimetric analysis demonstrated a small resultant increase in the low dose deposition to the surrounding normal tissues. For BECT, the average primary OAR mean dose and Target+2cm rind mean dose were 27.5% and 60.0%, respectively. For IM-BECT, the average primary OAR mean dose and Target+2cm rind mean dose increased slightly to 30.9% and 64.6%, respectively [Primary OAR mean (P = 0.0008), and Target+2cm rind mean (P = 0.0001), paired t-test].

CONCLUSION

IM-BECT is an effective method of reducing dosimetric hotspots in patients undergoing radiation therapy for cancer of the HN. This improvement came at the expense of a small increase in dose to the underlying tissues. This retrospective planning study represents the first example of IM-BECT being applied to real patient cases and suggests further development of IM-BECT is warranted.

Comparison of the Direct Power Consumption for Different Linac Treatment Parameters in External Beam Radiation Therapy

PURPOSE/OBJECTIVE(S)

The negative impact of climate change on the environment has led to increasing concern around the world. Relatively little is known about the contribution of radiation oncology systems to carbon emissions. This study measures the energy utilization of Linac-based EBRT for different treatment parameters and techniques, which was then converted to power use (kWh) and ultimately a carbon footprint of various photon treatment approaches.

MATERIALS/METHODS

A Varian TrueBeam was evaluated. The direct power consumption was measured using a Fluke 1736 Power Logger, recorded in one-second intervals for one week. Different photon and electron beam energies, dose rates, treatment techniques (3D, IMRT, gated), and imaging types (kV, MV) were evaluated. Clinical treatment plans were reviewed, and average treatment times used to determine kWh. IRB approval was obtained. The Greenhouse Gas Equivalencies Calculator was used to determine kg of CO2.

RESULTS

Power draw for 6 MV, 10 MV, and 18 MV at a rep rate of 600 MU/min was 31.6, 32.0, and 27.5 kW, respectively. The power draw for end of range dose rates for 6 MV (60, 600), 6 FFF (400, 1400), 10 FFF (400, 2400), and 6 MeV (100, 1000) were (22.2, 31.6 kW), (23.7, 31.6 kW), (19.6, 32.1 kW), and (22.6, 23.6 kW), respectively. 6 MV open 2D fields, modulated IMRT fields, and gated/beam hold fields had similar power draw at 31.6, 31.7, and 31.9 kW, respectively. Portal MV imaging with 2.5 MV beam was 32.5 kW, while CBCT and kV/kV imaging was ∼11 kW and not distinguishable from baseline power fluctuations. A total of 191 delivered treatment plans were reviewed. Electron plans (n = 8) treatment time was on average 29 sec (16 sec STDEV) per fraction and 635 sec (185 sec STDEV) per course, 2D/3D plans (n = 63) were 77 sec (32 sec STDEV) and 1004 sec (1002 sec STDEV), and IMRT plans (n = 120) were 182 sec (60 sec STDEV) and 5351 sec (2401 sec STDEV), respectively. The kWh per treatment for electron, 2D/3D, and IMRT plans were 0.19, 0.68, and 1.6 kWh, respectively. The CO2 equivalent for electrons, 2D/3D, and IMRT techniques are 0.08, 0.29, and 0.7 kg.

CONCLUSION

There was some variability in the power draw for different energies and different dose rates but was relatively stable around 32 kW. Power consumption for clinical therapy is a result of kW power draw multiplied by duration of beam delivery, which for our patients varied significantly as a function of technique and number of fractions delivered. Reduction in radiation oncology carbon footprint will likely be driven more by number of fractions and type of treatment technique, and length of patient commute, rather than beam energy and dose rate selection.

Comprehensive analysis using DNA metabarcoding, SCAR marker based PCR assay, and HPLC unveils the adulteration in Brahmi herbal products

BACKGROUND

Brahmi is one of the important nootropic botanicals, widely sold in the market, with the name "Brahmi'' being used to describe both Bacopa monnieri and Centella asiatica species. The Brahmi herbal products market is expanding; hence, economically motivated adulteration is highly prevalent.

METHODS AND RESULTS

This study aimed to develop DNA-based methods, including SCAR marker-based PCR and metabarcoding, to authenticate Brahmi herbal products and compare these methods with HPLC. These methods have been validated using mock controls (in-house blended formulations). All targeted plant species in mock controls were detected successfully with all three methods, whereas, in market samples, only 22.2%, 55.6%, and 50.0% were found positive for Brahmi by PCR assay, DNA metabarcoding, and HPLC, respectively. Metabarcoding can detect the presence of non-labeled plants together with targeted species, which is an advantage over PCR assay or HPLC.

CONCLUSION

SCAR marker-based PCR is a rapid and cost-effective method for detecting the presence of B. monnieri and C. asiatica. However, in this study, the success rate of PCR amplification was relatively low because the primers targeted either RAPD or ITS-based SCAR markers. HPLC assay, although an alternative, was unable to detect the presence of other botanicals, just like the SCAR marker-based PCR assay. On the other hand, metabarcoding can be utilized to identify the target plants, even in very small quantities, while also providing simulated identification of other botanicals. This study successfully addressed the need for quality control of Brahmi herbal products and provided the first-time report of DNA metabarcoding for such products.

A combined approach of DNA metabarcoding collectively enhances the detection efficiency of medicinal plants in single and polyherbal formulations

Introduction

Empirical research has refined traditional herbal medicinal systems. The traditional market is expanding globally, but inadequate regulatory guidelines, taxonomic knowledge, and resources are causing herbal product adulteration. With the widespread adoption of barcoding and next-generation sequencing, metabarcoding is emerging as a potential tool for detecting labeled and unlabeled plant species in herbal products.

Methods

This study validated newly designed rbcL and ITS2 metabarcode primers for metabarcoding using in-house mock controls of medicinal plant gDNA pools and biomass pools. The applicability of the multi-barcode sequencing approach was evaluated on 17 single drugs and 15 polyherbal formulations procured from the Indian market.

Results

The rbcL metabarcode demonstrated 86.7% and 71.7% detection efficiencies in gDNA plant pools and biomass mock controls, respectively, while the ITS2 metabarcode demonstrated 82.2% and 69.4%. In the gDNA plant pool and biomass pool mock controls, the cumulative detection efficiency increased by 100% and 90%, respectively. A 79% cumulative detection efficiency of both metabarcodes was observed in single drugs, while 76.3% was observed in polyherbal formulations. An average fidelity of 83.6% was observed for targeted plant species present within mock controls and in herbal formulations.

Discussion

In the present study, we achieved increasing cumulative detection efficiency by combining the high universality of the rbcL locus with the high-resolution power of the ITS2 locus in medicinal plants, which shows applicability of multilocus strategies in metabarcoding as a potential tool for the Pharmacovigilance of labeled and unlabeled plant species in herbal formulations.

Digital PCR: A Tool to Authenticate Herbal Products and Spices

Authentication of herbal products and spices is experiencing a resurgence using DNA-based molecular tools, mainly species-specific assays and DNA barcoding. However, poor DNA quality and quantity are the major demerits of conventional PCR and real-time quantitative PCR (qPCR), as herbal products and spices are highly enriched in secondary metabolites such as polyphenolic compounds. The third-generation digital PCR (dPCR) technology is a highly sensitive, accurate, and reliable method to detect target DNA molecules as it is less affected by PCR inhibiting secondary metabolites due to nanopartitions. Therefore, it can be certainly used for the detection of adulteration in herbal formulations. In dPCR, extracted DNA is subjected to get amplification in nanopartitions using target gene primers, the EvaGreen master mix, or fluorescently labeled targeted gene-specific probes. Here, we describe the detection of Carica papaya (CP) adulteration in Piper nigrum (PN) products using species-specific primers. We observed an increase in fluorescence signal as the concentration of target DNA increased in PN-CP blended formulations (mock controls). Using species-specific primers, we successfully demonstrated the use of dPCR in the authentication of medicinal botanicals.

Retrospective comparison of percutaneous balloon pericardiotomy with pericardiocentesis versus pericardiocentesis alone for management of symptomatic pericardial effusions

Background

Cardiac tamponade is a potentially life-threatening complication of pericardial effusion. Pericardiocentesis with drainage is the mainstay of treatment for patients with pericardial effusion and cardiac tamponade. Percutaneous balloon pericardiotomy (PBP) is an adjunct to pericardiocentesis that may alleviate the risk for recurrent effusion and repeat procedures. However, the efficacy of PBP plus pericardiocentesis compared to pericardiocentesis alone is not clear.

Purpose

We sought to determine whether PBP plus pericardiocentesis was associated with less recurrence of pericardial effusion than pericardiocentesis alone.

Methods

We conducted a single-centre retrospective analysis of patients ≥18 years old with non-iatrogenic pericardial effusion undergoing either pericardiocentesis alone or PBP plus pericardiocentesis for the first time. For PBP, a balloon was advanced over a guidewire until it crossed the pericardium and was then inflated until the balloon profile was fully expanded. Type of balloon used, and single or double balloon technique were left up to the operator. Recurrent pericardial effusion was defined as a large pericardial effusion on echocardiogram, pericardial effusion that caused hemodynamic compromise, or pericardial effusion that necessitated another intervention to drain at any time after initial procedure. Risk factors for recurrent pericardial effusion were also assessed.

Results

There were 208 patients who underwent pericardiocentesis, with 33 patients receiving PBP plus pericardiocentesis. In all patients, the rate of recurrent pericardial effusion was 15.9% and 15.2%, respectively (p=0.92). In patients with a cancer diagnosis at time of procedure, the rate of recurrent pericardial effusion was 17.8% and 16.7%, respectively (p=0.89). In patients with malignant pericardial effusion as confirmed by cytology, the rate of recurrent pericardial effusion was 20.4% and 13.3%, respectively (p=0.72). Patients with a connective tissue disease (CTD) had an increased odds ratio (OR) of recurrent pericardial effusion when compared to patients without a CTD (OR 3.19, 95% CI 1.31–7.77).

Conclusions

The results of this study suggest that PBP plus pericardiocentesis offers no significant benefit over pericardiocentesis alone at preventing recurrent pericardial effusion. This finding was true in all sub-groups, including patients with cancer and patients with malignant pericardial effusion. Patients with a CTD were three times more likely than patients without a CTD of having a recurrent pericardial effusion, independent of treatment strategy.

Funding Acknowledgement

Type of funding sources: None.

1253 Unlocking Growth Options in Surgical Education and Training During the Pandemic

Introduction

The COVID-19 pandemic brought widespread disruption to structured surgical education and training. The knee-jerk reaction is often pessimism about surgical training’s future, particularly in the Improved Surgical Training (IST) pilot’s context. However, Einstein famously once said, “In the midst of every crises lies great opportunity”. Unlocking growth during periods of high uncertainty is a premise of real options theory; one utilised by supply chain managers and decision scientists, but novel to medical education. This study explores the growth options that have resulted from new operational models during the pandemic.

Method

Using a qualitative case study approach, data were obtained from interviews with core surgical trainees across Scotland. Data coding and inductive thematic analysis were undertaken.

Results

Forty-six trainees participated. Analysis from trainees’ perspective revealed: unexpected fulfilment from redeployment to non-surgical specialties, benefits to personal development from the unintended broad-based training across surgical specialties, improved collaborative teamworking between specialties and allied healthcare professionals, and enhanced supervised learning opportunities. Institutional growth options reported by trainees included: rapid uptake of telemedicine and digital technology, implementation of single hospital episode encounters for minor conditions, streamlined processes in theatre and acute admissions, and changes in working culture towards rationalising and teamworking.

Conclusions

Growth options have been deliberately and unintentionally unlocked due to individual and institutional adaptions and innovations in response to the exogenous disruption. While some changes may be temporary, hopefully structured reflection on these changes and responders to them will drive surgical education and training into a new sustainable and resilient post-pandemic era.

Evaluation of bacterial strains isolated from Late Quaternary alluvial sediments spanning ~ 28 m in depth for heavy metal tolerance and Cr(VI) removal ability

Microbial heavy metal tolerance in subsurface samples is indicative of long-term ecotoxicological impact of metals and could also reflect metal contamination of groundwater. However, the heavy metal tolerance characteristics of microbes isolated from subsurface river sediment profiles are still obscure. In the present study, determination of heavy metal tolerance of bacterial strains isolated from two Late Quaternary sediment profiles (~ 28 m and ~25 m deep) located at the Mahi river basin, Western India, was carried out. Identification of bacterial isolates by the 16S rRNA gene sequencing revealed that bacterial isolates affiliated with phyla Actinobacteria, Proteobacteria, Firmicutes, and Bacteroidetes were dominant in both sediment profiles. Heavy metal tolerance of bacterial strains as determined by plate diffusion assay revealed order of metal tolerance as follows: Hg(II)<Cd(II)< Ni(II)<Cu(II)=Cr(VI). Chromate removal study in liquid medium suggested that bacterial strains procured from subsurface possessed the ability to remove Cr(VI) with varied magnitude. A packed bed column experiment indicated that bacterial strains obtained from the subsurface have the potential for Cr(VI) removal from different particle size consistencies of the sediments.

Optimization of switch diagnostics on the MAIZE linear transformer driver

The MAIZE Linear Transformer Driver consists of 40 capacitor-switch-capacitor "bricks" connected in parallel. When these 40 bricks are charged to ±100-kV and then discharged synchronously, the MAIZE facility generates a 1-MA current pulse with a 100-ns rise time into a matched load impedance. Discharging each of the capacitors in a brick is carried out by the breakdown of a spark-gap switch, a process that results in the emission of light. Monitoring this output light with a fiber optic coupled to a photomultiplier tube (PMT) and an oscilloscope channel provides information on switch performance and timing jitter-whether a switch fired early, late, or in phase with the other switches. However, monitoring each switch with a dedicated detector-oscilloscope channel can be problematic for facilities where the number of switches to be monitored (e.g., 40 on MAIZE) greatly exceeds the number of detector-oscilloscope channels available. The technique of using fibers to monitor light emission from switches can be optimized by treating a PMT as a binary digit or bit and using a combinatorial encoding scheme, where each switch is monitored by a unique combination of fiber-PMT-oscilloscope channels simultaneously. By observing the unique combination of fiber-PMT-oscilloscope channels that are turned on, the prefiring or late-firing of a single switch on MAIZE can be identified by as few as six PMT-oscilloscope channels. The number of PMT-oscilloscope channels, N, required to monitor X switches can be calculated by 2^N = X + 1, where the number "2" is selected because the PMT-oscilloscope acts as a bit. In this paper, we demonstrate the use of this diagnostic technique on MAIZE. We also present an analysis of how this technique could be scaled to monitor the tens of thousands of switches proposed for various next generation pulsed power facilities.

Role of TrkB in the anxiolytic-like and antidepressant-like effects of vagal nerve stimulation: Comparison with desipramine

A current hypothesis regarding the mechanism of antidepressant (AD) action suggests the involvement of brain-derived neurotrophic factor (BDNF). Consistent with this hypothesis, the receptor for BDNF (and neurotrophin 4/5 (NT-4/5)), Tropomyosin-related kinase B (TrkB), is activated in rodents by treatment with classical AD drugs. Vagal nerve stimulation (VNS), a therapy for treatment resistant depression (TRD), also activates TrkB in rodents. However, the role of this receptor in the therapeutic effects of VNS is unclear. In the current study, the involvement of TrkB in the effects of VNS was investigated in rats using its inhibitor, K252a. Anxiolytic-like and AD-like effects were analyzed using the novelty suppressed feeding test (NSFT) and forced swim test (FST), respectively. K252a blocked the anxiolytic-like effect of chronic VNS treatment and the AD-like effect of acute VNS treatment. By contrast, blocking TrkB did not prevent either the anxiolytic-like or AD-like effect of chronic treatment with desipramine (DMI), a selective noradrenergic reuptake inhibitor; it did, however, block the acute effect of DMI in the FST. To examine whether the activation of TrkB caused by either VNS or DMI is ligand-dependent, use was made of TrkB-Fc, a molecular scavenger for ligands of TrkB. Intraventricular administration of TrkB-Fc blocked the acute activation of TrkB induced by either treatment, indicating that treatment-induced activation of this receptor is ligand-dependent. The behavioral results highlight differences in the involvement of TrkB in the chronic effects of an AD drug and a stimulation therapy as well as its role in acute versus chronic effects of DMI.

Severe airflow obstruction and eosinophilic lung disease after Stevens-Johnson syndrome

Respiratory involvement is a frequent complication of Stevens-Johnson syndrome (SJS). However, there are very few convincing reports of persistent pulmonary sequelae, as demonstrated by spirometry, radiology and pathology. The current study presents a case of a 13-yr-old female with T-cell acute lymphocytic leukaemia who developed persistent, severe, obstructive lung disease following an episode of SJS. A lung biopsy demonstrated bronchiolar submucosal fibrosis consistent with constrictive bronchiolitis, as well as eosinophilic micro-abscesses, which, to the current authors' knowledge, has not been previously described. The present study illustrates specific histopathological features that highlight a possible association between Stevens-Johnson syndrome, constrictive bronchiolitis and eosinophilic micro-abscesses. The eosinophils may be associated with permanent mucosal damage, as seen in the present case, by releasing mediators that have a pro-fibrogenetic role. However, further investigation is warranted.

Circulating filarial antigen in serum and hydrocele fluid from individuals living in an endemic area for bancroftian filariasis

This study examined circulating filarial antigen by monoclonal antibody Og4C3-enzyme-linked immunosorbent assay (ELISA) from 114 men with hydrocele, living in an endemic area. Nocturnal blood and hydrocele fluid were collected and examined for microfilaria. ELISA was performed on serum and hydrocele fluid for detection of antigen. Amongst 114 cases, 5(4.4%) showed microfilaria in blood but none in fluid. ELISA was positive in 13(11.40%) serum and 5 (4.4%) fluid samples. All five fluid antigen positive cases were positive for antibodies and showed microfilaria in blood. These findings emphasize the use of circulating filarial antigen detection and alternative usage of hydrocele fluid for diagnosis of filariasis.

Skeletal absorbed fractions for electrons in the adult male: considerations of a revised 50-microm definition of the bone endosteum

In 1995, the International Commission on Radiological Protection (ICRP) issued ICRP Publication 70 which provided an extensive update to the physiological and anatomical reference data for the skeleton of adults and children originally issued in ICRP Publication 23. Although ICRP Publication 70 has been a valuable document in the development of reference voxel computational phantoms, additional guidance is needed for dose assessment in the skeletal tissues beyond that given in ICRP Publication 30. In this study, a computed tomography (CT) and micro-CT-based model of the skeletal tissues is presented, which considers (1) a 50-microm depth in marrow for the osteoprogenitor cells, (2) electron escape from trabecular spongiosa to the surrounding cortical bone, (3) cortical bone to trabecular spongiosa cross-fire for electrons and (4) variations in specific absorbed fraction with changes in bone marrow cellularity for electrons. A representative data set is given for electron dosimetry in the craniofacial bones of the adult male.

A hyperboliod representation of the bone-marrow interface within 3D NMR images of trabecular bone: applications to skeletal dosimetry

Recent advances in physical models of skeletal dosimetry utilize high-resolution NMR microscopy images of trabecular bone. These images are coupled to radiation transport codes to assess energy deposition within active bone marrow irradiated by bone- or marrow-incorporated radionuclides. Recent studies have demonstrated that the rectangular shape of image voxels is responsible for cross-region (bone-to-marrow) absorbed fraction errors of up to 50% for very low-energy electrons (<50 keV). In this study, a new hyperboloid adaptation of the marching cube (MC) image-visualization algorithm is implemented within 3D digital images of trabecular bone to better define the bone-marrow interface, and thus reduce voxel effects in the assessment of cross-region absorbed fractions. To test the method, a mathematical sample of trabecular bone was constructed, composed of a random distribution of spherical marrow cavities, and subsequently coupled to the EGSnrc radiation code to generate reference values for the energy deposition in marrow or bone. Next, digital images of the bone model were constructed over a range of simulated image resolutions, and coupled to EGSnrc using the hyperboloid MC (HMC) algorithm. For the radionuclides 33P, 117mSn, 131I and 153Sm, values of S(marrow<--bone) estimated using voxel models of trabecular bone were shown to have relative errors of 10%, 9%, <1% and <1% at a voxel size of 150 microm. At a voxel size of 60 microm, these errors were 6%, 5%, <1% and <1%, respectively. When the HMC model was applied during particle transport, the relative errors on S(marrow<--bone) for these same radionuclides were reduced to 7%, 6%, <1% and <1% at a voxel size of 150 microm, and to 2%, 2%, <1% and <1% at a voxel size of 60 microm. The technique was also applied to a real NMR image of human trabecular bone with a similar demonstration of reductions in dosimetry errors.

Voxel effects within digital images of trabecular bone and their consequences on chord-length distribution measurements

Chord-length distributions through the trabecular regions of the skeleton have been investigated since the early 1960s. These distributions have become important features for bone marrow dosimetry; as such, current models rely on the accuracy of their measurements. Recent techniques utilize nuclear magnetic resonance (NMR) microscopy to acquire 3D images of trabecular bone that are then used to measure 3D chord-length distributions by Monte Carlo methods. Previous studies have shown that two voxel effects largely affect the acquisition of these distributions within digital images. One is particularly pertinent as it dramatically changes the shape of the distribution and reduces its mean. An attempt was made to reduce this undesirable effect and good results were obtained for a single-sphere model using minimum acceptable chord (MAC) methods (Jokisch et al 2001 Med. Phys. 28 1493-504). The goal of the present work is to extend the study of these methods to more general models in order to better quantify their consequences. First, a mathematical model of a trabecular bone sample was used to test the usefulness of the MAC methods. The results showed that these methods were not efficient for this simulated bone model. These methods were further tested on a single voxelized sphere over a large range of voxel sizes. The results showed that the MAC methods are voxel-size dependent and overestimate the mean chord length for typical resolutions used with NMR microscopy. The study further suggests that bone and marrow chord-length distributions currently utilized in skeletal dosimetry models are most likely affected by voxel effects that yield values of mean chord length lower than their true values.

Surface area overestimation within three-dimensional digital images and its consequence for skeletal dosimetry

The most recent methods for trabecular bone dosimetry are based on Monte Carlo transport simulations within three-dimensional (3D) images of real human bone samples. Nuclear magnetic resonance and micro-computed tomography have been commonly used as imaging tools for studying trabecular microstructure. In order to evaluate the accuracy of these techniques for radiation dosimetry, a previous study was conducted that showed an overestimate in the absorbed fraction of energy for low-energy electrons emitted within the marrow space and irradiating the bone trabeculae. This problem was found to be related to an overestimate of the surface area of the true bone-marrow interface within the 3D digital images, and was identified as the surface-area effect. The goal of the present study is to better understand how this surface-area effect occurs in the case of single spheres representing individual marrow cavities within trabecular bone. First, a theoretical study was conducted which showed that voxelization of the spherical marrow cavity results in a 50% overestimation of the spherical surface area. Moreover, this overestimation cannot be reduced through a reduction in the voxel size (e.g., improved image resolution). Second, a series of single-sphere marrow cavity models was created with electron sources simulated within the sphere (marrow source) and outside the sphere (bone trabeculae source). The series of single-sphere models was then voxelized to represent 3D digital images of varying resolution. Transport calculations were made for both marrow and bone electron sources within these simulated images. The study showed that for low-energy electrons (<100 keV), the 50% overestimate of the bone-marrow interface surface area can lead to a 50% overestimate of the cross-absorbed fraction. It is concluded that while improved resolution will not reduce the surface area effects found within 3D image-based transport models, a tenfold improvement in current image resolution would compensate the associated errors in cross-region absorbed fractions for low-energy electron sources. Alternatively, other methods of defining the bone-marrow interface, such as with a polygonal isosurface, would provide improvements in dosimetry without the need for drastic reductions in image voxel size.

Skeletal dosimetry via NMR microscopy: investigations of sample reproducibility and signal source

Nuclear magnetic resonance microscopy has been used for several years as a means of quantifying the 3D microarchitecture of the cancellous regions of the skeleton. These studies were originally undertaken for the purpose of developing non-invasive techniques for the early detection of osteoporosis and other bone structural changes. Recently, nuclear magnetic resonance microscopy has also been used to acquire this same 3D data for the purpose of both (1) generating chord length data across bone trabeculae and marrow cavities and (2) generating 3D images for direct coupling to Monte Carlo radiation transport codes. In both cases, one is interested in the reproducibility of the dosimetric data obtained from nuclear magnetic resonance microscopy. In the first of two studies, a trabecular bone sample from the femoral head of a 51-y-old male cadaver was subjected to repeated image acquisition, image processing, image coupling, and radiation transport simulations. The resulting absorbed fractions at high electron energies (4 MeV) were shown to vary less than 4% among four different imaging sessions of the same sample. In a separate study, two femoral head samples were imaged under differing conditions of the NMR signal source. In the first case, the samples were imaged with intact marrow. These samples were then subjected to marrow digestion and immersed in Gd-doped water, which then filled the marrow cavities. Energy-dependent absorbed fraction profiles for both the marrow-intact and marrow-free samples showed essentially equivalent results. These studies thus provide encouragement that skeletal dosimetry models of improved patient specificity can be achieved via NMR microscopy in vivo.

Site-specific variability in trabecular bone dosimetry: considerations of energy loss to cortical bone

With continual advances in radionuclide therapies, increasing emphasis is being placed on improving the patient specificity of dose estimates to marrow tissues. While much work has been focused on determining patient-specific assessments of radionuclide uptake in the skeleton, few studies have been initiated to explore the individual variability of absorbed fraction data for electron and beta-particle sources in various skeletal sites. The most recent values of radionuclide S values used in clinical medicine continue to utilize a formalism in which electrons are transported under a trabecular bone geometry of infinite extent. No provisions are thus made for the fraction of energy lost to the cortical bone cortex of the skeletal site and its surrounding tissues. In the present study, NMR microscopy was performed on trabecular bone samples taken from the femoral head and humeral proximal epiphysis of three subjects: a 51-year male, an 82-year female, and an 86-year female. Following image segmentation and coupling to EGS4, electrons were transported within macrostructural models of the various skeletal sites that explicitly include the spatial extent of the spongiosa, as well as the thickness of the surrounding cortical bone. These energy-dependent profiles of absorbed fractions to marrow tissues were then compared to transport simulations made within an infinite region of spongiosa. Ratios of mean absorbed fraction, as weighted by the beta energy spectra, under both transport methodologies were then assembled for the radionuclides 32P and 90Y. These ratios indicate that corrections to existing radionuclide S values for 32P can vary by as much as 5% for the male, 6% for the 82-year female, and 8% for the 86-year female. For the higher-energy beta spectrum of 90Y, these same corrections can reach 8%, 10%, and 11%, respectively.

Voxel size effects in three-dimensional nuclear magnetic resonance microscopy performed for trabecular bone dosimetry

An important problem in internal dosimetry is the assessment of energy deposition by beta particles within trabecular regions of the skeleton. Recent dosimetry methods for trabecular bone are based on Monte Carlo particle transport simulations within three-dimensional (3D) images of real human bone samples. Nuclear magnetic resonance (NMR) microscopy is a 3D imaging technique of choice due to the large signal differential between bone tissue and the water-filled marrow cavities. Image voxel sizes currently used in NMR microscopy are between 50 microm and 100 microm, but the images are time consuming to acquire and can only be performed at present for in vitro samples. It is therefore important to evaluate what resolution is best suitable in order to properly characterize the trabecular microstructure, to adequately predict the tissue dosimetry, and to minimize imaging time. In this work, a mathematical model of trabecular bone, composed of a distribution of spherical marrow cavities, was constructed. The mathematical model was subsequently voxelized with different voxel sizes (16 microm to 1,000 microm) to simulate 3D NMR images. For each image, voxels are assigned to either bone or marrow according to their enclosed marrow fraction. Next, the images are coupled to the EGS4 electron transport code and absorbed fractions to bone and marrow are calculated for a marrow source of monoenergetic electrons. Radionuclide S values are also determined for the voxelized images with results compared to data calculated for the pure mathematical sample. The comparison shows that for higher energy electrons (>400 keV), good convergence of the results is seen even within images of poor resolution. Above 400 keV, a voxel resolution as large as 300 microm results in dosimetry errors below 5%. For low-energy electrons and high-resolution images, the self-dose to marrow is also determined to within 5% accuracy. Nevertheless, increased voxelization of the image overestimates the surface area of the bone-marrow interface leading to errors in the cross-dose to bone as high as 25% for some low-energy beta emitters.

Accentuation of ichthyosis vulgaris due to associated leprosy

A case of ichthyosis vulgaris associated with tuberculoid leprosy is reported. Ichthyotic scales were markedly accentuated within the anaesthetic patches of leprosy.

The probable mechanism of the accentuation of ichthyosis by leprosy is discussed.