The Antiviral Effect of Berdazimer Sodium on Molluscum Contagiosum Virus Using a Novel In Vitro Methodology

Molluscum contagiosum (MC) is characterized by skin lesions containing the highly contagious molluscum contagiosum poxvirus (MCV). MCV primarily infects children, with one US Food and Drug Administration (FDA)-approved drug-device treatment in use but no approved medications. Assessing antivirals is hindered by the inability of MCV to replicate in vitro. Here, we use vaccinia virus as a surrogate to provide evidence of the anti-poxvirus properties of berdazimer sodium, a new chemical entity, and the active substance in berdazimer gel, 10.3%, a nitric oxide-releasing topical in phase 3 development for the treatment of MC. We show that berdazimer sodium reduced poxvirus replication and, through a novel methodology, demonstrate that cells infected with drug-treated MCV virions have reduced early gene expression. Specifically, this is accomplished by studying the nuclear factor kappa-light-chain-enhancer of activated B cell (NF-kB)-blocking protein MC160 as an example of an early gene. The results provide a plausible unique antiviral mechanism of action supporting increased MCV resolution observed in patients treated with berdazimer gel, 10.3% and describe a novel methodology that overcomes limitations in investigating MCV response in vitro to a potential new MC topical medication.

Renitrosylation of banked human red blood cells improves deformability and reduces adhesivity

BACKGROUND

Transfusion of red blood cells (RBCs) is a frequent health care practice. However, unfavorable consequences may occur from transfusions of stored RBCs and are associated with RBC changes during storage. Loss of S-nitrosohemoglobin (SNO-Hb) and other S-nitrosothiols (SNOs) during storage is implicated as a detriment to transfusion efficacy. It was hypothesized that restoring SNOs within banked RBCs would improve RBC functions relevant to successful transfusion outcomes, namely, increased deformability and decreased adhesivity.

STUDY DESIGN AND METHODS

Stored human RBCs were incubated with nitric oxide (NO) donors PROLI/NO and DEA/NO (disodium 1-[2-(carboxylato)-pyrrolidin-1-yl]diazen-1-ium-1,2-diolate and diethylammonium (Z)-1-(N,N-diethylamino)diazen-1-ium-1,2-diolate) under varying experimental conditions (e.g., aerobic/anaerobic incubation, NO donor to RBC ratio). SNO restoration was evaluated in vitro and in vivo as a means to improve RBC function after storage.

RESULTS

Incubation of RBCs with the NO donors resulted in 10-fold greater levels of SNO-Hb versus untreated control or sham RBCs, with significantly higher Hb-bound NO yields from an NO dose delivered by DEA/NO. RBC incubation with DEA/NO at a stoichiometry of 1:62.5 NO:Hb significantly increased RBC deformabilty and reduced adhesion to cultured endothelial cells. RBC incubation with DEA/NO also increased S-nitrosylation of RBC cytoskeletal and membrane proteins, including the β-spectrin chain. Renitrosylation attenuated both RBC sequestration in the lung and the mild blood oxygen saturation impairments seen with banked RBCs in a mouse model of transfusion.

CONCLUSIONS

RBC renitrosylation using NO donors has promise for correcting deficient properties (e.g., adhesivity, rigidity, and SNO loss) of banked RBCs and in turn improving transfusion outcomes.

The effect of nitric oxide surface flux on the foreign body response to subcutaneous implants

Although the release of nitric oxide (NO) from biomaterials has been shown to reduce the foreign body response (FBR), the optimal NO release kinetics and doses remain unknown. Herein, polyurethane-coated wire substrates with varying NO release properties were implanted into porcine subcutaneous tissue for 3, 7, 21 and 42 d. Histological analysis revealed that materials with short NO release durations (i.e., 24 h) were insufficient to reduce the collagen capsule thickness at 3 and 6 weeks, whereas implants with longer release durations (i.e., 3 and 14 d) and greater NO payloads significantly reduced the collagen encapsulation at both 3 and 6 weeks. The acute inflammatory response was mitigated most notably by systems with the longest duration and greatest dose of NO release, supporting the notion that these properties are most critical in circumventing the FBR for subcutaneous biomedical applications (e.g., glucose sensors).

Nitric oxide release: part I. Macromolecular scaffolds

The roles of nitric oxide (NO) in physiology and pathophysiology merit the use of NO as a therapeutic for certain biomedical applications. Unfortunately, limited NO payloads, too rapid NO release, and the lack of targeted NO delivery have hindered the clinical utility of NO gas and low molecular weight NO donor compounds. A wide-variety of NO-releasing macromolecular scaffolds has thus been developed to improve NO's pharmacological potential. In this tutorial review, we provide an overview of the most promising NO release scaffolds including protein, organic, inorganic, and hybrid organic-inorganic systems. The NO release vehicles selected for discussion were chosen based on their enhanced NO storage, tunable NO release characteristics, and potential as therapeutics.

Examination of bacterial resistance to exogenous nitric oxide

While much research has been directed to harnessing the antimicrobial properties of exogenous NO, the possibility of bacteria developing resistance to such therapy has not been thoroughly studied. Herein, we evaluate potential NO resistance using spontaneous and serial passage mutagenesis assays. Specifically, Staphylococcus aureus, Methicillin-resistant S. aureus (MRSA), Staphylococcus epidermidis, Escherichia coli, and Pseudomonas aeruginosa were systematically exposed to NO-releasing 75mol% MPTMS-TEOS nitrosothiol particles at or below minimum inhibitory concentration (MIC) levels. In the spontaneous mutagenesis assay, bacteria that survived exposure to lethal concentrations of NO showed no increase in MIC. Similarly, no increase in MIC was observed in the serial passage mutagenesis assay after exposure of these species to sub-inhibitory concentrations of NO through 20 d.

Photoinitiated nitric oxide-releasing tertiary S-nitrosothiol-modified xerogels

The synthesis of a tertiary thiol-bearing silane precursor (i.e., N-acetyl penicillamine propyltrimethoxysilane or NAPTMS) to enable enhanced NO storage stability at physiological temperature is described. The novel silane was co-condensed with alkoxy- or alkylalkoxysilanes under varied synthetic parameters (e.g., water to silane ratio, catalyst and solvent concentrations, and reaction time) to evaluate systematically the formation of stable xerogel films. The resulting xerogels were subsequently nitrosated to yield tertiary RSNO-modified coatings. Total NO storage ranged from 0.87 to 1.78 μmol cm(-2) depending on the NAPTMS concentration and xerogel coating thickness. Steric hindrance near the nitroso functionality necessitated the use of photolysis to liberate NO. The average NO flux for irradiated xerogels (20% NAPTMS balance TEOS xerogel film cast using 30 μL) in physiological buffer at 37 °C was ∼23 pmol cm(-2) s(-1). The biomedical utility of the photoinitiated NO-releasing films was illustrated by their ability to both reduce Pseudomonas aeruginosa adhesion by ∼90% relative to control interfaces and eradicate the adhered bacteria.

Visible photolysis and amperometric detection of S-nitrosothiols

The concentration of S-nitrosothiols (RSNOs), endogenous transporters of the signaling molecule nitric oxide (NO), fluctuate greatly in physiology often as a function of disease state. RSNOs may be measured indirectly by cleaving the S-N bond and monitoring the liberated NO. While ultraviolet photolysis and reductive-based cleavage both decompose RSNOs to NO, poor selectivity and the need for additional reagents preclude their utility clinically. Herein, we report the coupling of visible photolysis (i.e., 500-550 nm) and amperometric NO detection to quantify RSNOs with greater selectivity and sensitivity. Enhanced sensitivity (up to 1.56 nA μM(-1)) and lowered theoretical detection limits (down to 30 nM) were achieved for low molecular weight RSNOs (i.e., S-nitrosoglutathione, S-nitrosocysteine) by tuning the irradiation exposure. Detection of nitrosated proteins (i.e., S-nitrosoalbumin) was also possible, albeit at a decreased sensitivity (0.11 nA μM(-1)). This detection scheme was used to measure RSNOs in plasma and illustrate the potential of this method for future physiological studies.

Fabrication of nitric oxide-releasing polyurethane glucose sensor membranes

Despite clear evidence that polymeric nitric oxide (NO) release coatings reduce the foreign body response (FBR) and may thus improve the analytical performance of in vivo continuous glucose monitoring devices when used as sensor membranes, the compatibility of the NO release chemistry with that required for enzymatic glucose sensing remains unclear. Herein, we describe the fabrication and characterization of NO-releasing polyurethane sensor membranes using NO donor-modified silica vehicles embedded within the polymer. In addition to demonstrating tunable NO release as a function of the NO donor silica scaffold and polymer compositions and concentrations, we describe the impact of the NO release vehicle and its release kinetics on glucose sensor performance.

Stöber Synthesis of Nitric Oxide-Releasing S-Nitrosothiol-Modified Silica Particles

We report the synthesis of S-nitrosothiol-modified silica particles capable of nitric oxide (NO) release. The thiol precursor modification to form S-nitrosothiol NO donors was introduced into the silica network via co-condensation of mercaptosilane and alkoxysilane precursors. Both the concentrations of reactants (i.e., water, ammonia, and silane) and the silane feed rate into the reaction proved important in the yield of monodisperse, spherical particles with tunable diameters ranging from 241-718 nm. Subsequent nitrosation resulted in NO storage approaching ~4.40 μmol NO mg(-1), as determined by total NO release. Behaving similar to low molecular weight S-nitrosothiol NO donors, the NO release from the macromolecular silica vehicles was influenced by light, temperature, and metal ions.

Nitric oxide-releasing S-nitrosothiol-modified xerogels

The synthesis, material characterization, and in vitro biocompatibility of S-nitrosothiol (RSNO)-modified xerogels are described. Thiol-functionalized xerogel films were formed by hydrolysis and co-condensation of 3-mercaptopropyltrimethoxysilane (MPTMS) and methyltrimethoxysilane (MTMOS) sol-gel precursors at varying concentrations. Subsequent thiol nitrosation via acidified nitrite produced RSNO-modified xerogels capable of generating nitric oxide (NO) for up to 2 weeks under physiological conditions. Xerogels also exhibited NO generation upon irradiation with broad-spectrum light or exposure to copper, with NO fluxes proportional to wattage and concentration, respectively. Xerogels were capable of storing up to approximately 1.31 micromol NO mg(-1), and displayed negligible fragmentation over a 2-week period. Platelet and bacterial adhesion to nitrosated films was reduced compared to non-nitrosated controls, confirming the antithrombotic and antibacterial properties of the NO-releasing materials. Fibroblast cell viability was maintained on the xerogel surfaces illustrating the promise of RSNO-modified xerogels as biomedical device coatings.

Xerogel optical sensor films for quantitative detection of nitroxyl

Xerogel sensing films were synthesized via sol-gel chemistry were used to fabricate optical nitroxyl (HNO) sensors [corrected] Selective detection of HNO in solution was achieved by monitoring the rates of manganese(III) meso-tetrakis(4-sulfonatophenyl) porphyrinate (MnIIITPPS) reductive nitrosylation in the anaerobic interior of aminoalkoxysilane-derived xerogel films. Nitroxyl permeability in sensor films deposited in round-bottom 96-well plates was enhanced via incorporation of trimethoxysilyl-terminated poly(amidoamine-organosilicon) dendrimers in the xerogel network. The selectivity of MnIIITPPS for HNO, the overall sensitivity, and the working dynamic range of the resulting sensors were characterized. The HNO-sensing microtiter plates were used to quantify pH-dependent HNO generation by the recently described HNO-donor sodium 1-(isopropylamino)diazene-1-ium-1,2-diolate (IPA/NO), and compare HNO production efficiency between IPA/NO and Angeli's salt, a traditional HNO-donor.