Deciphering Winter Sprouting Potential of Erianthus procerus Derived Sugarcane Hybrids under Subtropical Climates

Winter sprouting potential and red rot resistance are two key parameters for successful sugarcane breeding in the subtropics. However, the cultivated sugarcane hybrids had a narrow genetic base; hence, the present study was planned to evaluate the Erianthus procerus genome introgressed Saccharum hybrids for their ratooning potential under subtropical climates and red rot tolerance under tropical and subtropical climates. A set of 15 Erianthus procerus derived hybrids confirmed through the 5S rDNA marker, along with five check varieties, were evaluated for agro-morphological, quality, and physiological traits for two years (2018-2019 and 2019-2020) and winter sprouting potential for three years (2018-2019, 2019-2020, and 2020-2021). The experimental material was also tested against the most prevalent isolates of the red rot pathogen in tropical (Cf671 and Cf671 + Cf9401) and subtropical regions (Cf08 and Cf09). The E. procerus hybrid GU 12-19 had the highest winter sprouting potential, with a winter sprouting index (WSI) of 10.6, followed by GU 12-22 with a WSI of 8.5. The other top-performing hybrids were as follows: GU 12-21 and GU 12-29 with a WSI of 7.2 and 6.9, respectively. A set of nine E. procerus-derived hybrids, i.e., GU04 (28) EO-2, GU12-19, GU12-21, GU12-22, GU12-23, GU12-26, GU12-27, GU12-30, and GU12-31, were resistant to the most prevalent isolates of red rot in both tropical and subtropical conditions. The association analysis revealed significant correlations between the various traits, particularly the fibre content, with a maximum number of associations, which indicates its multifaceted impact on sugarcane characteristics. Principal component analysis (PCA) summarised the data, explaining 57.6% of the total variation for the measured traits and genotypes, providing valuable insights into the performance and characteristics of the Erianthus procerus derived hybrids under subtropical climates. The anthocyanin content of Erianthus procerus hybrids was better than the check varieties, ranging from 0.123 to 0.179 (2018-2019) and 0.111 to 0.172 (2019-2020); anthocyanin plays a vital role in mitigating cold injury, acting as an antioxidant in cool weather conditions, particularly in sugarcane. Seven hybrids recorded a more than 22% fibre threshold, indicating their industrial potential. These hybrids could serve as potential donors for cold tolerance and a high ratooning ability, along with red rot resistance, under subtropical climates.

Evidence and opportunities for developing non-transgenic genome edited crops using site-directed nuclease 1 approach

The innovations and progress in genome editing/new breeding technologies have revolutionized research in the field of functional genomics and crop improvement. This revolution has expanded the horizons of agricultural research, presenting fresh possibilities for creating novel plant varieties equipped with desired traits that can effectively combat the challenges posed by climate change. However, the regulation and social acceptance of genome-edited crops still remain as major barriers. Only a few countries considered the site-directed nuclease 1 (SDN1) approach-based genome-edited plants under less or no regulation. Hence, the present review aims to comprise information on the research work conducted using SDN1 in crops by various genome editing tools. It also elucidates the promising candidate genes that can be used for editing and has listed the studies on non-transgenic crops developed through SDN1 either by Agrobacterium-mediated transformation or by ribo nucleoprotein (RNP) complex. The review also hoards the existing regulatory landscape of genome editing and provides an overview of globally commercialized genome-edited crops. These compilations will enable confidence in researchers and policymakers, across the globe, to recognize the full potential of this technology and reconsider the regulatory aspects associated with genome-edited crops. Furthermore, this compilation serves as a valuable resource for researchers embarking on the development of customized non-transgenic crops through the utilization of SDN1.

Harnessing High Yield Potential in Wheat (Triticum aestivum L.) under Climate Change Scenario

Wheat is a major staple food crop for food security in India and South Asia. The current rate (0.8-1.2%) of genetic gain in wheat is significantly shorter than the 2.4% needed to meet future demand. The changing climate and increased yield loss due to factors such as terminal heat stress necessitate the need for climate-resilient practices to sustain wheat production. At ICAR-Indian Institute of Wheat and Barley Research in Karnal, Haryana, India, a new High Yield Potential Trial (HYPT) was conceptualized and subsequently conducted at six locations in the highly productive North Western Plain Zone (NWPZ). An attempt was made to harness higher wheat yields through the best pipeline genotypes suitable for early sowing and modified agronomic practices to explore the feasibility of a new approach that is profitable to farmers. The modified agronomic practices included like early sowing, application of 150% recommended dose of fertilizers, and two sprays of growth regulators (Chlormaquate chloride and Tebuconazole) to prevent lodging. The mean yield in the HYPT was 19.4% superior compared to the best trials conducted during the normal sowing time. A highly positive and significant correlation of grain yield with grain filling duration (0.51), biomass (0.73), harvest index (0.75), normalized difference vegetation Index (0.27), chlorophyll content index (0.32), and 1000-grain weight (0.62) was observed. An increased return of USD 201.95/ha was realized in the HYPT when compared to normal sowing conditions. This study proves that new integrated practices have the potential to provide the best profitable yields in wheat in the context of climate change.

Mapping QTL for Phenological and Grain-Related Traits in a Mapping Population Derived from High-Zinc-Biofortified Wheat

Genomic regions governing days to heading (DH), days to maturity (DM), plant height (PH), thousand-kernel weight (TKW), and test weight (TW) were investigated in a set of 190 RILs derived from a cross between a widely cultivated wheat-variety, Kachu (DPW-621-50), and a high-zinc variety, Zinc-Shakti. The RIL population was genotyped using 909 DArTseq markers and phenotyped in three environments. The constructed genetic map had a total genetic length of 4665 cM, with an average marker density of 5.13 cM. A total of thirty-seven novel quantitative trait loci (QTL), including twelve for PH, six for DH, five for DM, eight for TKW and six for TW were identified. A set of 20 stable QTLs associated with the expression of DH, DM, PH, TKW, and TW were identified in two or more environments. Three novel pleiotropic genomic-regions harboring co-localized QTLs governing two or more traits were also identified. In silico analysis revealed that the DArTseq markers were located on important putative candidate genes such as MLO-like protein, Phytochrome, Zinc finger and RING-type, Cytochrome P450 and pentatricopeptide repeat, involved in the regulation of pollen maturity, the photoperiodic modulation of flowering-time, abiotic-stress tolerance, grain-filling duration, thousand-kernel weight, seed morphology, and plant growth and development. The identified novel QTLs, particularly stable and co-localized QTLs, will be validated to estimate their effects in different genetic backgrounds for subsequent use in marker-assisted selection (MAS).

Ensuring Nutritional Security in India through Wheat Biofortification: A Review

Undernourishment of nutrients, also known as hidden hunger, affects over 2 billion populace globally. Even though stunting among children below five years of age has decreased in India in the last ten years, India is home to roughly thirty percent of the world's population of stunted pre-schoolers. A significant improvement has been witnessed in the targeted development and deployment of biofortified crops; approximately 20 million farm households from developing counties benefit from cultivating and consuming biofortified crops. There is ample scope for including biofortified varieties in the seed chain, ensuring nutritional security. Wheat is a dietary staple in India, typically consumed as wholemeal flour in the form of flatbreads such as chapatti and roti. Wheat contributes to nearly one fifth of global energy requirements and can also provide better amounts of iron (Fe) and zinc (Zn). As a result, biofortified wheat can serve as a medium for delivery of essential micronutrients such as Fe and Zn to end users. This review discusses wheat biofortification components such as Fe and Zn dynamics, its uptake and movement in plants, the genetics of their buildup, and the inclusion of biofortified wheat varieties in the seed multiplication chain concerning India.

Genome-wide association study for grain yield and component traits in bread wheat (Triticum aestivum L.)

Genomic regions governing days to heading (DH), grain filling duration (GFD), grain number per spike (GNPS), grain weight per spike (GWPS), plant height (PH), and grain yield (GY) were investigated in a set of 280 diverse bread wheat genotypes. The genome-wide association studies (GWAS) panel was genotyped using a 35K Axiom Array and phenotyped in five environments. The GWAS analysis showed a total of 27 Bonferroni-corrected marker-trait associations (MTAs) on 15 chromosomes representing all three wheat subgenomes. The GFD showed the highest MTAs (8), followed by GWPS (7), GY (4), GNPS (3), PH (3), and DH (2). Furthermore, 20 MTAs were identified with more than 10% phenotypic variation. A total of five stable MTAs (AX-95024590, AX-94425015, AX-95210025 AX-94539354, and AX-94978133) were identified in more than one environment and associated with the expression of DH, GFD, GNPS, and GY. Similarly, two novel pleiotropic genomic regions with associated MTAs i.e. AX-94978133 (4D) and AX-94539354 (6A) harboring co-localized QTLs governing two or more traits were also identified. In silico analysis revealed that the SNPs were located on important putative candidate genes such as F-box-like domain superfamily, Lateral organ boundaries, LOB, Thioredoxin-like superfamily Glutathione S-transferase, RNA-binding domain superfamily, UDP-glycosyltransferase family, Serine/threonine-protein kinase, Expansin, Patatin, Exocyst complex component Exo70, DUF1618 domain, Protein kinase domain involved in the regulation of grain size, grain number, growth and development, grain filling duration, and abiotic stress tolerance. The identified novel MTAs will be validated to estimate their effects in different genetic backgrounds for subsequent use in marker-assisted selection (MAS).

Integrated Approach in Genomic Selection to Accelerate Genetic Gain in Sugarcane

Marker-assisted selection (MAS) has been widely used in the last few decades in plant breeding programs for the mapping and introgression of genes for economically important traits, which has enabled the development of a number of superior cultivars in different crops. In sugarcane, which is the most important source for sugar and bioethanol, marker development work was initiated long ago; however, marker-assisted breeding in sugarcane has been lagging, mainly due to its large complex genome, high levels of polyploidy and heterozygosity, varied number of chromosomes, and use of low/medium-density markers. Genomic selection (GS) is a proven technology in animal breeding and has recently been incorporated in plant breeding programs. GS is a potential tool for the rapid selection of superior genotypes and accelerating breeding cycle. However, its full potential could be realized by an integrated approach combining high-throughput phenotyping, genotyping, machine learning, and speed breeding with genomic selection. For better understanding of GS integration, we comprehensively discuss the concept of genetic gain through the breeder’s equation, GS methodology, prediction models, current status of GS in sugarcane, challenges of prediction accuracy, challenges of GS in sugarcane, integrated GS, high-throughput phenotyping (HTP), high-throughput genotyping (HTG), machine learning, and speed breeding followed by its prospective applications in sugarcane improvement.

Recent Advances in Sugarcane Genomics, Physiology, and Phenomics for Superior Agronomic Traits

Advances in sugarcane breeding have contributed significantly to improvements in agronomic traits and crop yield. However, the growing global demand for sugar and biofuel in the context of climate change requires further improvements in cane and sugar yields. Attempts to achieve the desired rates of genetic gain in sugarcane by conventional breeding means are difficult as many agronomic traits are genetically complex and polygenic, with each gene exerting small effects. Unlike those of many other crops, the sugarcane genome is highly heterozygous due to its autopolyploid nature, which further hinders the development of a comprehensive genetic map. Despite these limitations, many superior agronomic traits/genes for higher cane yield, sugar production, and disease/pest resistance have been identified through the mapping of quantitative trait loci, genome-wide association studies, and transcriptome approaches. Improvements in traits controlled by one or two loci are relatively easy to achieve; however, this is not the case for traits governed by many genes. Many desirable phenotypic traits are controlled by quantitative trait nucleotides (QTNs) with small and variable effects. Assembling these desired QTNs by conventional breeding methods is time consuming and inefficient due to genetic drift. However, recent developments in genomics selection (GS) have allowed sugarcane researchers to select and accumulate desirable alleles imparting superior traits as GS is based on genomic estimated breeding values, which substantially increases the selection efficiency and genetic gain in sugarcane breeding programs. Next-generation sequencing techniques coupled with genome-editing technologies have provided new vistas in harnessing the sugarcane genome to look for desirable agronomic traits such as erect canopy, leaf angle, prolonged greening, high biomass, deep root system, and the non-flowering nature of the crop. Many desirable cane-yielding traits, such as single cane weight, numbers of tillers, numbers of millable canes, as well as cane quality traits, such as sucrose and sugar yield, have been explored using these recent biotechnological tools. This review will focus on the recent advances in sugarcane genomics related to genetic gain and the identification of favorable alleles for superior agronomic traits for further utilization in sugarcane breeding programs.

Pollen viability as a potential trait for screening heat-tolerant wheat (Triticum aestivum L.)

High temperature during reproductive stage of winter crops causes sterility of pollen grains and reduced yield. It is essential to find the genotypes with higher pollen viability, as it is most sensitive to temperature extremes. A field study was conducted with wheat (Triticum aestivum L.) genotypes to understand the effect of high temperature on pollen viability and grain yield for 2years under timely (TS) and late sown (LS) conditions. A strong correlation was observed between higher pollen viability and higher grain yield under heat stress condition. Genotypes like K7903, HD2932, WH730 and RAJ3765 showed higher pollen viability, whereas DBW17, HUW468, RAJ4014 and UP2425 had lower pollen viability under LS condition. Further, the quantification of antioxidant enzymes activity mainly, Super oxide dismutase (SOD), Catalase (CAT), Peroxidase (POD) and Glutathione peroxidase (GPX) has showed significant variation among study genotypes. Thus, the identified high pollen viability genotypes can serve as a potential source for trait based breeding under heat stress in wheat. The present study is a first of its kind to assess more number of wheat genotypes for pollen viability and antioxidants activity under field condition. It also confirms that pollen viability can be used as a potential trait to screen genotypes for heat stress tolerance in wheat.

Identification of Novel Genomic Regions for Biofortification Traits Using an SNP Marker-Enriched Linkage Map in Wheat (Triticum aestivum L.)

Micronutrient and protein malnutrition is recognized among the major global health issues. Genetic biofortification is a cost-effective and sustainable strategy to tackle malnutrition. Genomic regions governing grain iron concentration (GFeC), grain zinc concentration (GZnC), grain protein content (GPC), and thousand kernel weight (TKW) were investigated in a set of 163 recombinant inbred lines (RILs) derived from a cross between cultivated wheat variety WH542 and a synthetic derivative (Triticum dicoccon PI94624/Aegilops tauschii [409]//BCN). The RIL population was genotyped using 100 simple-sequence repeat (SSR) and 736 single nucleotide polymorphism (SNP) markers and phenotyped in six environments. The constructed genetic map had a total genetic length of 7,057 cM. A total of 21 novel quantitative trait loci (QTL) were identified in 13 chromosomes representing all three genomes of wheat. The trait-wise highest number of QTL was identified for GPC (10 QTL), followed by GZnC (six QTL), GFeC (three QTL), and TKW (two QTL). Four novel stable QTL (QGFe.iari-7D.1, QGFe.iari-7D.2, QGPC.iari-7D.2, and QTkw.iari-7D) were identified in two or more environments. Two novel pleiotropic genomic regions falling between Xgwm350-AX-94958668 and Xwmc550-Xgwm350 in chromosome 7D harboring co-localized QTL governing two or more traits were also identified. The identified novel QTL, particularly stable and co-localized QTL, will be validated to estimate their effects on different genetic backgrounds for subsequent use in marker-assisted selection (MAS). Best QTL combinations were identified by the estimation of additive effects of the stable QTL for GFeC, GZnC, and GPC. A total of 11 RILs (eight for GZnC and three for GPC) having favorable QTL combinations identified in this study can be used as potential donors to develop bread wheat varieties with enhanced micronutrients and protein.

Integrated genomic selection for rapid improvement of crops

An increase in the rate of crop improvement is essential for achieving sustained food production and other needs of ever-increasing population. Genomic selection (GS) is a potential breeding tool that has been successfully employed in animal breeding and is being incorporated into plant breeding. GS promises accelerated breeding cycles through a rapid selection of superior genotypes. Numerous empirical and simulation studies on GS and realized impacts on improvement in the crop yields are recently being reported. For a holistic understanding of the technology, we briefly discuss the concept of genetic gain, GS methodology, its current status, advantages of GS over other breeding methods, prediction models, and the factors controlling prediction accuracy in GS. Also, integration of speed breeding and other novel technologies viz. high throughput genotyping and phenotyping technologies for enhancing the efficiency and pace of GS, followed by its prospective applications in varietal development programs is reviewed.

Molecular mapping of the grain iron and zinc concentration, protein content and thousand kernel weight in wheat (Triticum aestivum L.)

Genomic regions responsible for accumulation of grain iron concentration (Fe), grain zinc concentration (Zn), grain protein content (PC) and thousand kernel weight (TKW) were investigated in 286 recombinant inbred lines (RILs) derived from a cross between an old Indian wheat variety WH542 and a synthetic derivative (Triticum dicoccon PI94624/Aegilops squarrosa [409]//BCN). RILs were grown in six environments and evaluated for Fe, Zn, PC, and TKW. The population showed the continuous distribution for all the four traits, that for pooled Fe and PC was near normal, whereas, for pooled Zn, RILs exhibited positively skewed distribution. A genetic map spanning 2155.3cM was constructed using microsatellite markers covering the 21 chromosomes and used for QTL analysis. 16 quantitative trait loci (QTL) were identified in this study. Four QTLs (QGFe.iari-2A, QGFe.iari-5A, QGFe.iari-7A and QGFe.iari-7B) for Fe, five QTLs (QGZn.iari-2A, QGZn.iari-4A, QGZn.iari-5A, QGZn.iari-7A and QGZn.iari-7B) for Zn, two QTLs (QGpc.iari-2A and QGpc.iari-3A) for PC, and five QTLs (QTkw.iari-1A, QTkw.iari-2A, QTkw.iari-2B, QTkw.iari-5B and QTkw.iari-7A) for TKW were identified. The QTLs together explained 20.0%, 32.0%, 24.1% and 32.3% phenotypic variation, respectively, for Fe, Zn, PC and TKW. QGpc.iari-2A was consistently expressed in all the six environments, whereas, QGFe.iari-7B and QGZn.iari-2A were identified in two environments each apart from pooled mean. QTkw.iari-2A and QTkw.iari-7A, respectively, were identified in four and three environments apart from pooled mean. A common region in the interval of Xgwm359-Xwmc407 on chromosome 2A was associated with Fe, Zn, and PC. One more QTL for TKW was identified on chromosome 2A but in a different chromosomal region (Xgwm382-Xgwm359). Two more regions on 5A (Xgwm126-Xgwm595) and 7A (Xbarc49-Xwmc525) were found to be associated with both Fe and Zn. A QTL for TKW was identified (Xwmc525-Xbarc222) in a different chromosomal region on the same chromosome (7A). This reflects at least a partly common genetic basis for the four traits. It is concluded that fine mapping of the regions of the three chromosomes of A genome involved in determining the accumulation of Fe, Zn, PC, and TKW in this mapping population may be rewarding.

An epidemiological study of sheep pox infection in Karnataka State, India

Analysis of retrospective quantitative sheep pox epidemiological data from the Government Animal Husbandry Department, Karnataka, India, covering 24 years revealed significant information on sheep pox. The state has a dense sheep population including some valuable breeds. Data revealed the endemicity of the disease: there were a considerable number of outbreaks and attacks, high mortality and case fatality rates and low immunisation coverage. None of the years studied were free from infection. Temporally, the disease was most prevalent between November and May. Spatially, the disease was recorded in 19 out of 27 districts; in some of these districts sheep pox was highly endemic, in some it was endemic at low levels and in the remaining districts outbreaks occurred sporadically. Environmental factors influenced disease occurrence. Vaccine production met only one tenth of the requirement, and its peak utilisation was in the dry season.

Differentiation of pathogenic and saprophytic leptospires by polymerase chain reaction

PURPOSE

To study the differences between pathogenic and saprophytic leptospires.

METHOD

A total of 275 samples were collected from different sources out of which 107 were subjected to PCR and bacteriological culturing. Two sets of primers were used for detection of leptospiral DNA and differentiation of pathogenic and saprophytic leptospires. Differentiation was also carried out by conventional methods.

RESULTS

Twenty seven samples were found positive by PCR ut of which 26 were pathogenic and one was saprophytic. Culturing in EMJH medium yielded four isolates, of which isolates from sera were found to be pathogenic and isolate from water was found to be saprophytic.

CONCLUSION

From the present study, it was concluded that PCR is simple, specific and rapid method for detection as well as differentiation of leptospires when compared to conventional methods.

Effect of ciprofloxacin on specific immune response in rabbits

Ciprofloxacin (10 mg/kg body weight, iv, twice daily for 4 days) failed to alter specific antibody titres, total immunoglobulin concentration, total serum protein concentration, total leukocyte count, lymphocyte percentage, phagocytic index and skin thickness in DNCB skin sensitivity test against Brucella plain killed antigen in New Zealand White rabbits. It can be concluded that ciprofloxacin at the dose and duration employed did not adversely affect specific immune response in normal rabbits.

The specificity of antibody response in experimental and natural bovine paratuberculosis studied by crossed immunoelectrophoresis with intermediate gel

The sonicate antigen (MPS) of a local strain (IVRI) of Mycobacterium paratuberculosis and a commercial lysate of Strain 18 were analysed using hyperimmune rabbit and calf antisera to MPS in crossed immunoelectrophoresis with intermediate gel (CIE-ig) and sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE). The rabbit antiserum was more potent than the calf antiserum and it precipitated 35 and 15 antigens, respectively, among MPS and lysate antigens. SDS-PAGE resolved 50 and 32 peptides among these antigens respectively, of which, 35 and 15 were precipitated by rabbit antiserum. A CIE-ig reference system, with 30 MPS antigens, was standardized and used to analyse antibody specificities among sera derived from animals experimentally and naturally infected with bovine paratuberculosis. Fourteen antigens of MPS were found to be reactive with these sera and among these, Antigens 2 and 5 were found to be serodominant; sonicate antigens of M. bovis BCG and M. avium did not contain these antigens. Both were high molecular weight (greater than 60 kDa) antigens which may be of serodiagnostic value.