Technical characterization of five x-ray detectors for paediatric radiography applications

Physical image quality of five x-ray detectors used in the paediatric imaging department is characterized with the aim of establishing the range/scope of imaging performance provided by these detectors for neonatal imaging. Two computed radiography (CR) detectors (MD4.0 powder imaging plate (PIP) and HD5.0 needle imaging plate (NIP), Agfa HealthCare NV, B-2640 Mortsel, Belgium) and three flat panel detectors (FPD) (the Agfa DX-D35C and DX-D45C and the DRX-2530C (Carestream Health Inc., Rochester, NY 14608, USA)) were assessed. Physical image quality was characterized using the detector metrics given by the International Electrotechnical Commission (IEC 62220-1) to measure modulation transfer function (MTF), the noise power spectrum (NPS) and the detective quantum efficiency (DQE) using the IEC-specified beam qualities of RQA3 and RQA5. The DQE was evaluated at the normal operating detector air kerma (DAK) level, defined at 2.5 µGy for all detectors, and at factors of 1/3.2 and 3.2 times the normal level. MTF curves for the different detectors were similar at both RQA3 and RQA5 energies; the average spatial frequency for the 50% point (MTF0.5) at RQA3 was 1.26 mm^-1, with a range from 1.20 mm^-1 to 1.37 mm^-1. The DQE of the NIP CR compared to the PIP CR was notably greater and similar to that for the FPD devices. At RQA3, average DQE for the FPD and NIP (at 0.5 mm^-1; 2.5 µGy) was 0.57 compared to 0.26 for the PIP CR. At the RQA5 energy, the DRX-2530C and the DX-D45C had the highest DQE (~0.6 at 0.5 mm^-1; 2.5 µGy). Noise separation analysis using the polynomial model showed higher electronic noise for the DX-D35C and DRX-2530C detectors; this explains the reduced DQE seen at 0.7 µGy/image. The NIP CR detector offers notably improved DQE performance compared to the PIP CR system and a value similar to the DQE for FPD devices at the RQA3 energy.

Groundwater contamination in coastal urban areas: Anthropogenic pressure and natural attenuation processes. Example of Recife (PE State, NE Brazil)

In a context of increasing land use pressure (over-exploitation, surface-water contamination) and repeated droughts, identifying the processes affecting groundwater quality in coastal megacities of the tropical and arid countries will condition their long-term social and environmental sustainability. The present study focuses on the Brazilian Recife Metropolitan Region (RMR), which is a highly urbanized area (3,743,854 inhabitants in 2010) on the Atlantic coast located next to an estuarial zone and overlying a multi-layered sedimentary system featured by a variable sediment texture and organic content. It investigates the contamination and redox status patterns conditioning potential attenuation within the shallow aquifers that constitute the interface between the city and the strategic deeper semi-confined aquifers. These latter are increasingly exploited, leading to high drawdown in potenciometric levels of 20-30m and up to 70m in some high well density places, and potentially connected to the surface through leakage. From a multi-tracer approach (major ions, major gases, δ(11)B, δ(18)O-SO4, δ(34)S-SO4) carried out during two field campaigns in September 2012 and March 2013 (sampling of 19 wells and 3 surface waters), it has been possible to assess the contamination sources and the redox processes. The increasing trend for mineralization from inland to coastal and estuarial wells (from 119 to around 10,000μS/cm) is at first attributed to water-rock interactions combined with natural and human-induced potentiometric gradients. Secondly, along with this trend, one finds an environmental pressure gradient related to sewage and/or surface-channel network impacts (typically depleted δ(11)B within the range of 10-15‰) that are purveyors of chloride, nitrate, ammonium and sulfate. Nitrate, ammonium and sulfate (ranging from 0 to 1.70mmol/L, from 0 to 0,65mmol/L, from 0.03 to 3.91mmol/L respectively are also potentially produced or consumed through various redox processes (pyrite oxidation, denitrification, dissimilatory nitrate reduction to ammonium) within the system, as is apparent within a patchwork of biogeochemical reactors. Furthermore, intensive pumping in the coastal area with its high well density punctually leads to temporary well salinization ([Cl] reaching temporarily 79mmol/L). Our results, summarized as a conceptual scheme based on environmental conditions, is a suitable basis for implementing sustainable management in coastal sedimentary hydrosystems influenced by highly urbanized conditions.

A review of natural CO2 accumulations in Europe as analogues for geological sequestration

Natural geological accumulations of carbon dioxide occur widely throughout Europe, often close to population centres. Some of these CO2 deposits leak, whereas others are sealed. Understanding these deposits is critical for selecting and designing underground storage sites for anthropogenic CO2. To provide confidence that the potential risks of geological CO2 storage are understood, geologists are required to predict how CO2 may behave once stored underground. Natural CO2 accumulations provide a unique opportunity to study long-term geochemical and geomechanical processes that may occur following geological storage of anthropogenic CO2. In addition, natural CO2 springs and gas vents can provide information on the mechanisms of gas migration and the potential effects of CO2 leakage to the surface. This paper provides a description of some natural, European CO2 occurrences.

CO2 accumulations occur in many basins across Europe. In addition, volcanic areas and seismically active areas allow CO2-rich fluids to migrate to the near surface. Many of these occur in areas that have been populated for hundreds and thousands of years.

Stratigraphic traps have allowed CO2 to accumulate below evaporite, limestone and mudstone caprocks. Comparisons between reservoir sandstone and equivalent nearby sandstones that contain no CO2 indicate that reservoir sandstones may experience increased secondary porosity development through feldspar dissolution. Where fracture reactivation allows CO2-rich fluids to migrate, limited self-sealing may take place through calcite precipitation. Gas migration experiments indicate that, due to geochemical interactions, fine-grained seals would be able to trap smaller volumes of CO2 compared to, for example CH4. In natural systems most leakage from depth occurs along fractures and is typically extremely localized on a metre-scale.

Integrating images into a central medical information system

Of the information items that must be easily available to the different actors involved in the care process, radiological images are not the least important. While until recently it was not feasible to include these into the medical information system, this situation has changed. Still, emphasis in PACS (Picture Archiving and Communication Systems) is primarily on the technological aspects. In this paper, in contrast, we stress the importance of integration of images into the overall workflow and into the overall medical record. We do so using illustrations from the PACS project of the University Hospitals Leuven. We briefly indicate that tight integration at the user interface level is needed, and that this requires more than standardized communication between subsystems.

Organ doses and subjective image quality of indirect digital panoramic radiography

OBJECTIVES

To determine if slight variations in exposure will affect diagnostic image quality and absorbed radiation doses for digital and analogue panoramic radiography.

METHODS

Thermoluminescent dosimeters were placed in the thyroid gland, eyes, submandibular glands, parotid glands and skin of two human cadaver heads. Three different exposure settings were used: 70 kV, 120 mAs; 77 kV, 75 mAs; and 81 kV, 60 mAs. Subjective image quality was assessed using a phantom head. Storage phosphor (SP) images were printed on film and both analogue and SP images were assessed for their subjective image quality on a five-point rating scale. The results were statistically analysed using logistic regression analysis and chi(2) tests.

RESULTS

Highest organ doses were measured for the submandibular glands, followed by the parotid glands. Salivary gland doses tended to be higher at lower kV settings. Image quality was not statistically different for the different exposure settings. Imaging technique did not seem to influence diagnostic image quality, except for the periapical status of upper premolars where SP was better. The main reason for any differences appeared to be interobserver variation.

CONCLUSIONS

Analogue and SP panoramic radiography performed equally well for subjective diagnostic image quality. No significant differences could be found at the exposure settings used in this study. Radiation doses were highest for the salivary glands, especially at lower kV settings.

The assessment of dose and image quality of storage phosphor systems: an overview of the different tasks

The assessment of the dose-image quality relation using storage phosphor systems requires a series of tasks. In the text, the main aspects are summarized and the differences with the measurements for X ray equipment using film-screen cassettes are indicated. Standards of testing are becoming available for quality control measurements of the equipment. The global analysis is, however, less standardised. Large scale trials concerning dose and image quality are missing. In particular, guidelines about the appropriate use of post processing parameters and image visualisation are scarce. In this regard, a newly proposed method to evaluate image quality as a function of post-processing parameters for particular types of clinical images is mentioned. It is concluded that a thorough analysis may be very time consuming, but if the properties of the digital detectors are exploited, many tasks can be automated.

Effect of halothane genotype, breed, feed withdrawal, and lairage on pork quality of belgian slaughter pigs

A total of 434 Belgian Landrace (B) or Piétrain x B (PB) pigs, of known halothane genotype (NN, Nn, and nn), were slaughtered in a commercial abattoir. Pigs were either fed until loading or deprived of food overnight before delivery. Upon arrival at the abattoir, pigs were slaughtered after different lairage times (within 1 h after arrival, after 2 to 3 h lairage, or 4 to 5 h lairage). Meat quality traits were measured on the carcass, as well as on a piece of loin. Halothane genotype was the predominant factor determining meat quality traits related to the PSE condition (P < .001 for pH 40 min after death, internal reflectance, color L value; P < .01 for drip losses, transmission value). For these traits, nn pigs were always significantly different from Nn and NN pigs. Depending on the specific trait, Nn pigs were intermediate between NN and nn pigs, or close to NN pigs. For pH 40 min after death and drip losses, Nn and NN pigs were significantly different, whereas the difference between Nn and NN pigs was not significant for internal reflectance, color L value, and transmission value. Shear force and intramuscular fat content were apparently not related to the PSE condition and were not influenced by the halothane genotype (P > .05). Differences in meat quality between B and PB pigs and between gilts and barrows were rather unimportant compared with the effect of halothane genotype. Overnight feed withdrawal had no effect on meat quality (P > .05 for all PSE-related traits). On the other hand, holding pigs a few hours in lairage improved meat quality compared with immediate slaughtering (P < .05 for pH and temperature in the loin 40 min after death, internal reflectance, color L value, transmission value, drip losses). This effect was more pronounced in stress-susceptible pigs than in stress-resistant pigs.