Estimating the cardiac signals of chimpanzees using a digital camera: validation and application of a novel non-invasive method for primate research

Cardiac measures such as heart rate measurements are important indicators of both physiological and psychological states. However, despite their extraordinary potential, their use is restricted in comparative psychology because traditionally cardiac measures involved the attachment of sensors to the participant's body, which, in the case of undomesticated animals such as nonhuman primates, is usually only possible during anesthesia or after extensive training. Here, we validate and apply a camera-based system that enables contact-free detection of animals' heart rates. The system automatically detects and estimates the cardiac signals from cyclic change in the hue of the facial area of a chimpanzee. In Study 1, we recorded the heart rate of chimpanzees using the new technology, while simultaneously measuring heart rate using classic PPG (photoplethysmography) finger sensors. We found that both methods were in good agreement. In Study 2, we applied our new method to measure chimpanzees' heart rate in response to seeing different types of video scenes (groupmates in an agonistic interaction, conspecific strangers feeding, nature videos, etc.). Heart rates changed during video presentation, depending on the video content: Agonistic interactions and conspecific strangers feeding lead to accelerated heart rate relative to baseline, indicating increased emotional arousal. Nature videos lead to decelerated heart rate relative to baseline, indicating a relaxing effect or heightened attention caused by these stimuli. Our results show that the new contact-free technology can reliably assess the heart rate of unrestrained chimpanzees, and most likely other primates. Furthermore, our technique opens up new avenues of research within comparative psychology and facilitates the health management of captive individuals.

Simulating cardiac signals on 3D human models for photoplethysmography development

Introduction: Image-based heart rate estimation technology offers a contactless approach to healthcare monitoring that could improve the lives of millions of people. In order to comprehensively test or optimize image-based heart rate extraction methods, the dataset should contain a large number of factors such as body motion, lighting conditions, and physiological states. However, collecting high-quality datasets with complete parameters is a huge challenge. Methods: In this paper, we introduce a bionic human model based on a three-dimensional (3D) representation of the human body. By integrating synthetic cardiac signal and body involuntary motion into the 3D model, five well-known traditional and four deep learning iPPG (imaging photoplethysmography) extraction methods are used to test the rendered videos. Results: To compare with different situations in the real world, four common scenarios (stillness, expression/talking, light source changes, and physical activity) are created on each 3D human. The 3D human can be built with any appearance and different skin tones. A high degree of agreement is achieved between the signals extracted from videos with the synthetic human and videos with a real human-the performance advantages and disadvantages of the selected iPPG methods are consistent for both real and 3D humans. Discussion: This technology has the capability to generate synthetic humans within various scenarios, utilizing precisely controlled parameters and disturbances. Furthermore, it holds considerable potential for testing and optimizing image-based vital signs methods in challenging situations where real people with reliable ground truth measurements are difficult to obtain, such as in drone rescue.

Optimal Maneuvering for Autonomous Vehicle Self-Localization

We consider the problem of optimal maneuvering, where an autonomous vehicle, an unmanned aerial vehicle (UAV) for example, must maneuver to maximize or minimize an objective function. We consider a vehicle navigating in a Global Navigation Satellite System (GNSS)-denied environment that self-localizes in two dimensions using angle-of-arrival (AOA) measurements from stationary beacons at known locations. The objective of the vehicle is to travel along the path that minimizes its position and heading estimation error. This article presents an informative path planning (IPP) algorithm that (i) uses the determinant of the self-localization estimation error covariance matrix of an unscented Kalman filter as the objective function; (ii) applies an l-step look-ahead (LSLA) algorithm to determine the optimal heading for a constant-speed vehicle. The novel algorithm takes into account the kinematic constraints of the vehicle and the AOA means of measurement. We evaluate the performance of the algorithm in five scenarios involving stationary and mobile beacons and we find the estimation error approaches the lower bound for the estimator. The simulations show the vehicle maneuvers to locations that allow for minimum estimation uncertainty, even when beacon placement is not conducive to accurate estimation.

A Comparison of Dense and Sparse Optical Flow Techniques for Low-Resolution Aerial Thermal Imagery

It is necessary to establish the relative performance of established optical flow approaches in airborne scenarios with thermal cameras. This study investigated the performance of a dense optical flow algorithm on 14 bit radiometric images of the ground. While sparse techniques that rely on feature matching techniques perform very well with airborne thermal data in high-contrast thermal conditions, these techniques suffer in low-contrast scenes, where there are fewer detectable and distinct features in the image. On the other hand, some dense optical flow algorithms are highly amenable to parallel processing approaches compared to those that rely on tracking and feature detection. A Long-Wave Infrared (LWIR) micro-sensor and a PX4Flow optical sensor were mounted looking downwards on a drone. We compared the optical flow signals of a representative dense optical flow technique, the Image Interpolation Algorithm (I2A), to the Lucas–Kanade (LK) algorithm in OpenCV and the visible light optical flow results from the PX4Flow in both X and Y displacements. The I2A to LK was found to be generally comparable in performance and better in cold-soaked environments while suffering from the aperture problem in some scenes.

A Review of Modern Thermal Imaging Sensor Technology and Applications for Autonomous Aerial Navigation

Limited navigation capabilities of many current robots and UAVs restricts their applications in GPS denied areas. Large aircraft with complex navigation systems rely on a variety of sensors including radio frequency aids and high performance inertial systems rendering them somewhat resistant to GPS denial. The rapid development of computer vision has seen cameras incorporated into small drones. Vision-based systems, consisting of one or more cameras, could arguably satisfy both size and weight constraints faced by UAVs. A new generation of thermal sensors is available that are lighter, smaller and widely available. Thermal sensors are a solution to enable navigation in difficult environments, including in low-light, dust or smoke. The purpose of this paper is to present a comprehensive literature review of thermal sensors integrated into navigation systems. Furthermore, the physics and characteristics of thermal sensors will also be presented to provide insight into challenges when integrating thermal sensors in place of conventional visual spectrum sensors.

Non-Contact Automatic Vital Signs Monitoring of Infants in a Neonatal Intensive Care Unit Based on Neural Networks

Infants with fragile skin are patients who would benefit from non-contact vital sign monitoring due to the avoidance of potentially harmful adhesive electrodes and cables. Non-contact vital signs monitoring has been studied in clinical settings in recent decades. However, studies on infants in the Neonatal Intensive Care Unit (NICU) are still limited. Therefore, we conducted a single-center study to remotely monitor the heart rate (HR) and respiratory rate (RR) of seven infants in NICU using a digital camera. The region of interest (ROI) was automatically selected using a convolutional neural network and signal decomposition was used to minimize the noise artefacts. The experimental results have been validated with the reference data obtained from an ECG monitor. They showed a strong correlation using the Pearson correlation coefficients (PCC) of 0.9864 and 0.9453 for HR and RR, respectively, and a lower error rate with RMSE 2.23 beats/min and 2.69 breaths/min between measured data and reference data. A Bland-Altman analysis of the data also presented a close correlation between measured data and reference data for both HR and RR. Therefore, this technique may be applicable in clinical environments as an economical, non-contact, and easily deployable monitoring system, and it also represents a potential application in home health monitoring.

Soil color analysis based on a RGB camera and an artificial neural network towards smart irrigation: A pilot study

Irrigation operations in agriculture are one of the largest water consumers in the world, and it has been increasing due to rising population and consequent increased demand for food. The development of advanced irrigation technologies based on modern techniques is of utmost necessity to ensure efficient use of water. Smart irrigation based on computer vision could help in achieving optimum water-utilization in agriculture using a highly available digital technology. This paper presents a non-contact vision system based on a standard video camera to predict the irrigation requirements for loam soils using a feed-forward back propagation neural network. The study relies on analyzing the differences in soil color captured by a video camera at different distances, times and illumination levels obtained from loam soil over four weeks of data acquisition. The proposed system used this color information as input to an artificial neural network (ANN) system to make a decision as to whether to irrigate the soil or not. The proposed system was very accurate, achieving a mean square error (MSE) of 1.616 × 10^-6 (training), 1.004 × 10^-5 (testing) and 1.809 × 10^-5 (validation). The proposed system is simple, robust and affordable making it promising technology to support precision agriculture.

Noncontact Sensing of Contagion

The World Health Organization (WHO) has declared COVID-19 a pandemic. We review and reduce the clinical literature on diagnosis of COVID-19 through symptoms that might be remotely detected as of early May 2020. Vital signs associated with respiratory distress and fever, coughing, and visible infections have been reported. Fever screening by temperature monitoring is currently popular. However, improved noncontact detection is sought. Vital signs including heart rate and respiratory rate are affected by the condition. Cough, fatigue, and visible infections are also reported as common symptoms. There are non-contact methods for measuring vital signs remotely that have been shown to have acceptable accuracy, reliability, and practicality in some settings. Each has its pros and cons and may perform well in some challenges but be inadequate in others. Our review shows that visible spectrum and thermal spectrum cameras offer the best options for truly noncontact sensing of those studied to date, thermal cameras due to their potential to measure all likely symptoms on a single camera, especially temperature, and video cameras due to their availability, cost, adaptability, and compatibility. Substantial supply chain disruptions during the pandemic and the widespread nature of the problem means that cost-effectiveness and availability are important considerations.

Hand Gesture Recognition Based on Computer Vision: A Review of Techniques

Hand gestures are a form of nonverbal communication that can be used in several fields such as communication between deaf-mute people, robot control, human-computer interaction (HCI), home automation and medical applications. Research papers based on hand gestures have adopted many different techniques, including those based on instrumented sensor technology and computer vision. In other words, the hand sign can be classified under many headings, such as posture and gesture, as well as dynamic and static, or a hybrid of the two. This paper focuses on a review of the literature on hand gesture techniques and introduces their merits and limitations under different circumstances. In addition, it tabulates the performance of these methods, focusing on computer vision techniques that deal with the similarity and difference points, technique of hand segmentation used, classification algorithms and drawbacks, number and types of gestures, dataset used, detection range (distance) and type of camera used. This paper is a thorough general overview of hand gesture methods with a brief discussion of some possible applications.

Noncontact Heart and Respiratory Rate Monitoring of Preterm Infants Based on a Computer Vision System: Protocol for a Method Comparison Study

BACKGROUND

Biomedical research in the application of noncontact methods to measure heart rate (HR) and respiratory rate (RR) in the neonatal population has produced mixed results. This paper describes and discusses a protocol for conducting a method comparison study, which aims to determine the accuracy of a proposed noncontact computer vision system to detect HR and RR relative to the HR and RR obtained by 3-lead electrocardiogram (ECG) in preterm infants in the neonatal unit.

OBJECTIVE

The aim of this preliminary study is to determine the accuracy of a proposed noncontact computer vision system to detect HR and RR relative to the HR and RR obtained by 3-lead ECG in preterm infants in the neonatal unit.

METHODS

A single-center cross-sectional study was planned to be conducted in the neonatal unit at Flinders Medical Centre, South Australia, in May 2018. A total of 10 neonates and their ECG monitors will be filmed concurrently for 10 min using digital cameras. Advanced image processing techniques are to be applied later to determine their physiological data at 3 intervals. These data will then be compared with the ECG readings at the same points in time.

RESULTS

Study enrolment began in May 2018. Results of this study were published in July 2019.

CONCLUSIONS

The study will analyze the data obtained by the noncontact system in comparison to data obtained by ECG, identify factors that may influence data extraction and accuracy when filming infants, and provide recommendations for how this noncontact system may be implemented into clinical applications.

INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID)

RR1-10.2196/13400.

An Advanced First Aid System Based on an Unmanned Aerial Vehicles and a Wireless Body Area Sensor Network for Elderly Persons in Outdoor Environments

For elderly persons, a fall can cause serious injuries such as a hip fracture or head injury. Here, an advanced first aid system is proposed for monitoring elderly patients with heart conditions that puts them at risk of falling and for providing first aid supplies using an unmanned aerial vehicle. A hybridized fall detection algorithm (FDB-HRT) is proposed based on a combination of acceleration and a heart rate threshold. Five volunteers were invited to evaluate the performance of the heartbeat sensor relative to a benchmark device, and the extracted data was validated using statistical analysis. In addition, the accuracy of fall detections and the recorded locations of fall incidents were validated. The proposed FDB-HRT algorithm was 99.16% and 99.2% accurate with regard to heart rate measurement and fall detection, respectively. In addition, the geolocation error of patient fall incidents based on a GPS module was evaluated by mean absolute error analysis for 17 different locations in three cities in Iraq. Mean absolute error was 1.08 × 10-5° and 2.01 × 10-5° for latitude and longitude data relative to data from the GPS Benchmark system. In addition, the results revealed that in urban areas, the UAV succeeded in all missions and arrived at the patient's locations before the ambulance, with an average time savings of 105 s. Moreover, a time saving of 31.81% was achieved when using the UAV to transport a first aid kit to the patient compared to an ambulance. As a result, we can conclude that when compared to delivering first aid via ambulance, our design greatly reduces delivery time. The proposed advanced first aid system outperformed previous systems presented in the literature in terms of accuracy of heart rate measurement, fall detection, and information messages and UAV arrival time.

Human motion analysis from UAV video

Purpose

The purpose of this paper is to present a preliminary solution to address the problem of estimating human pose and trajectory by an aerial robot with a monocular camera in near real time.

Design/methodology/approach

The distinguishing feature of the solution is a dynamic classifier selection architecture. Each video frame is corrected for perspective using projective transformation. Then, a silhouette is extracted as a Histogram of Oriented Gradients (HOG). The HOG is then classified using a dynamic classifier. A class is defined as a pose-viewpoint pair, and a total of 64 classes are defined to represent a forward walking and turning gait sequence. The dynamic classifier consists of a Support Vector Machine (SVM) classifier C64 that recognizes all 64 classes, and 64 SVM classifiers that recognize four classes each – these four classes are chosen based on the temporal relationship between them, dictated by the gait sequence.

Findings

The solution provides three main advantages: first, classification is efficient due to dynamic selection (4-class vs 64-class classification). Second, classification errors are confined to neighbors of the true viewpoints. This means a wrongly estimated viewpoint is at most an adjacent viewpoint of the true viewpoint, enabling fast recovery from incorrect estimations. Third, the robust temporal relationship between poses is used to resolve the left-right ambiguities of human silhouettes.

Originality/value

Experiments conducted on both fronto-parallel videos and aerial videos confirm that the solution can achieve accurate pose and trajectory estimation for these different kinds of videos. For example, the “walking on an 8-shaped path” data set (1,652 frames) can achieve the following estimation accuracies: 85 percent for viewpoints and 98.14 percent for poses.

Detection of Cardiopulmonary Activity and Related Abnormal Events Using Microsoft Kinect Sensor

Monitoring of cardiopulmonary activity is a challenge when attempted under adverse conditions, including different sleeping postures, environmental settings, and an unclear region of interest (ROI). This study proposes an efficient remote imaging system based on a Microsoft Kinect v2 sensor for the observation of cardiopulmonary-signal-and-detection-related abnormal cardiopulmonary events (e.g., tachycardia, bradycardia, tachypnea, bradypnea, and central apnoea) in many possible sleeping postures within varying environmental settings including in total darkness and whether the subject is covered by a blanket or not. The proposed system extracts the signal from the abdominal-thoracic region where cardiopulmonary activity is most pronounced, using a real-time image sequence captured by Kinect v2 sensor. The proposed system shows promising results in any sleep posture, regardless of illumination conditions and unclear ROI even in the presence of a blanket, whilst being reliable, safe, and cost-effective.

Simultaneous Tracking of Cardiorespiratory Signals for Multiple Persons Using a Machine Vision System With Noise Artifact Removal

Most existing non-contact monitoring systems are limited to detecting physiological signs from a single subject at a time. Still, another challenge facing these systems is that they are prone to noise artifacts resulting from motion of subjects, facial expressions, talking, skin tone, and illumination variations. This paper proposes an efficient non-contact system based on a digital camera to track the cardiorespiratory signal from a number of subjects (up to six persons) at the same time with a new method for noise artifact removal. The proposed system relied on the physiological and physical effects as a result of the activity of the cardiovascular and respiratory systems, such as skin color changes and head motion. Since these effects are imperceptible to the human eye and highly affected by the noise variations, we used advanced signal and video processing techniques, including developing video magnification technique, complete ensemble empirical mode decomposition with adaptive noise, and canonical correlation analysis to extract the heart rate and respiratory rate from multiple subjects under the noise artifact assumptions. The experimental results of the proposed system had a significant correlation (Pearson's correlation coefficient = 0.9994, Spearman correlation coefficient = 0.9987, and root mean square error = 0.32) when compared with the conventional contact methods (pulse oximeter and piezorespiratory belt), which makes the proposed system a promising candidate for novel applications.

Remote monitoring of cardiorespiratory signals from a hovering unmanned aerial vehicle

BACKGROUND

Remote physiological measurement might be very useful for biomedical diagnostics and monitoring. This study presents an efficient method for remotely measuring heart rate and respiratory rate from video captured by a hovering unmanned aerial vehicle (UVA). The proposed method estimates heart rate and respiratory rate based on the acquired signals obtained from video-photoplethysmography that are synchronous with cardiorespiratory activity.

METHODS

Since the PPG signal is highly affected by the noise variations (illumination variations, subject's motions and camera movement), we have used advanced signal processing techniques, including complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and canonical correlation analysis (CCA) to remove noise under these assumptions.

RESULTS

To evaluate the performance and effectiveness of the proposed method, a set of experiments were performed on 15 healthy volunteers in a front-facing position involving motion resulting from both the subject and the UAV under different scenarios and different lighting conditions.

CONCLUSION

The experimental results demonstrated that the proposed system with and without the magnification process achieves robust and accurate readings and have significant correlations compared to a standard pulse oximeter and Piezo respiratory belt. Also, the squared correlation coefficient, root mean square error, and mean error rate yielded by the proposed method with and without the magnification process were significantly better than the state-of-the-art methodologies, including independent component analysis (ICA) and principal component analysis (PCA).

Real Time Apnoea Monitoring of Children Using the Microsoft Kinect Sensor: A Pilot Study

The objective of this study was to design a non-invasive system for the observation of respiratory rates and detection of apnoea using analysis of real time image sequences captured in any given sleep position and under any light conditions (even in dark environments). A Microsoft Kinect sensor was used to visualize the variations in the thorax and abdomen from the respiratory rhythm. These variations were magnified, analyzed and detected at a distance of 2.5 m from the subject. A modified motion magnification system and frame subtraction technique were used to identify breathing movements by detecting rapid motion areas in the magnified frame sequences. The experimental results on a set of video data from five subjects (3 h for each subject) showed that our monitoring system can accurately measure respiratory rate and therefore detect apnoea in infants and young children. The proposed system is feasible, accurate, safe and low computational complexity, making it an efficient alternative for non-contact home sleep monitoring systems and advancing health care applications.

Noncontact Heart Activity Measurement System Based on Video Imaging Analysis

Vital parameter monitoring systems based on video camera imagery is a growing interest field in clinical and biomedical applications. Heart rate (HR) is one of the most important vital parameters of interest in a clinical diagnostic and monitoring system. This study proposed a noncontact HR and beat length measurement system based on both motion magnification and motion detection at four different regions of interest (ROIs) (wrist, arm, neck and leg). A motion magnification based on a Chebyshev filter was utilized in order to magnify heart pulses in different ROIs that are difficult to see with the naked eye. A new measuring system based on motion detection was used to measure HR and beat length by detecting rapid motion areas in the video frame sequences that represent the heart pulses and converting video frames into a corresponding logical matrix. Video quality metrics were also used to compare our magnification system with standard Eulerian video magnification to select which one has better magnification results and gives better results for the heart pulse. The 99.3% limits of agreement between the proposed system and reference measurement fall within[Formula: see text] beats/min based on Bland and Altman test. The proposed system is expected to produce new options for further noncontact information extraction.

Three biomimetic flight control sensors

Purpose

– Insects depend on the spatial, temporal and spectral distribution of light in the environment for navigation, collision avoidance and flight control. The principles of insect vision have been gradually revealed over the course of decades by biological scientists. The purpose of this paper is to report on bioinspired implementations and flight tests of these sensors and reflexes on unmanned aerial vehicles (UAVs). The devices are used for the stabilization of UAVs in attitude, heading and position. The implementations were developed to test the hypothesis that current understanding of insect optical flight control systems is feasible in real systems.

Design/methodology/approach

– Design was based on behavioral and anatomical studies of insects. The approach taken was to test the designs in flight on a UAV.

Findings

– The research showed that stabilization in attitude, heading and position is possible using the developed sensors.

Practical implications

– Partial alternatives to magnetic, inertial and GPS sensing have been demonstrated. Optical flow and polarization compassing are particularly relevant to flight in urban environments and in planetary exploration.

Originality/value

– For the first time the use of multispectral horizon sensing, polarization compassing and optical flow-based heading control have been demonstrated in flight.

Bioinspired engineering of exploration systems for NASA and DoD

A new approach called bioinspired engineering of exploration systems (BEES) and its value for solving pressing NASA and DoD needs are described. Insects (for example honeybees and dragonflies) cope remarkably well with their world, despite possessing a brain containing less than 0.01% as many neurons as the human brain. Although most insects have immobile eyes with fixed focus optics and lack stereo vision, they use a number of ingenious, computationally simple strategies for perceiving their world in three dimensions and navigating successfully within it. We are distilling selected insect-inspired strategies to obtain novel solutions for navigation, hazard avoidance, altitude hold, stable flight, terrain following, and gentle deployment of payload. Such functionality provides potential solutions for future autonomous robotic space and planetary explorers. A BEES approach to developing lightweight low-power autonomous flight systems should be useful for flight control of such biomorphic flyers for both NASA and DoD needs. Recent biological studies of mammalian retinas confirm that representations of multiple features of the visual world are systematically parsed and processed in parallel. Features are mapped to a stack of cellular strata within the retina. Each of these representations can be efficiently modeled in semiconductor cellular nonlinear network (CNN) chips. We describe recent breakthroughs in exploring the feasibility of the unique blending of insect strategies of navigation with mammalian visual search, pattern recognition, and image understanding into hybrid biomorphic flyers for future planetary and terrestrial applications. We describe a few future mission scenarios for Mars exploration, uniquely enabled by these newly developed biomorphic flyers.