Incorporating strontium enriched amorphous calcium phosphate granules in collagen/collagen-magnesium-hydroxyapatite osteochondral scaffolds improves subchondral bone repair

Osteochondral defect repair with a collagen/collagen-magnesium-hydroxyapatite (Col/Col-Mg-HAp) scaffold has demonstrated good clinical results. However, subchondral bone repair remained suboptimal, potentially leading to damage to the regenerated overlying neocartilage. This study aimed to improve the bone repair potential of this scaffold by incorporating newly developed strontium (Sr) ion enriched amorphous calcium phosphate (Sr-ACP) granules (100-150 μm). Sr concentration of Sr-ACP was determined with ICP-MS at 2.49 ± 0.04 wt%. Then 30 wt% ACP or Sr-ACP granules were integrated into the scaffold prototypes. The ACP or Sr-ACP granules were well embedded and distributed in the collagen matrix demonstrated by micro-CT and scanning electron microscopy/energy dispersive x-ray spectrometry. Good cytocompatibility of ACP/Sr-ACP granules and ACP/Sr-ACP enriched scaffolds was confirmed with in vitro cytotoxicity assays. An overall promising early tissue response and good biocompatibility of ACP and Sr-ACP enriched scaffolds were demonstrated in a subcutaneous mouse model. In a goat osteochondral defect model, significantly more bone was observed at 6 months with the treatment of Sr-ACP enriched scaffolds compared to scaffold-only, in particular in the weight-bearing femoral condyle subchondral bone defect. Overall, the incorporation of osteogenic Sr-ACP granules in Col/Col-Mg-HAp scaffolds showed to be a feasible and promising strategy to improve subchondral bone repair.

Automatic generation of subject-specific finite element models of the spine from magnetic resonance images

The generation of subject-specific finite element models of the spine is generally a time-consuming process based on computed tomography (CT) images, where scanning exposes subjects to harmful radiation. In this study, a method is presented for the automatic generation of spine finite element models using images from a single magnetic resonance (MR) sequence. The thoracic and lumbar spine of eight adult volunteers was imaged using a 3D multi-echo-gradient-echo sagittal MR sequence. A deep-learning method was used to generate synthetic CT images from the MR images. A pre-trained deep-learning network was used for the automatic segmentation of vertebrae from the synthetic CT images. Another deep-learning network was trained for the automatic segmentation of intervertebral discs from the MR images. The automatic segmentations were validated against manual segmentations for two subjects, one with scoliosis, and another with a spine implant. A template mesh of the spine was registered to the segmentations in three steps using a Bayesian coherent point drift algorithm. First, rigid registration was applied on the complete spine. Second, non-rigid registration was used for the individual discs and vertebrae. Third, the complete spine was non-rigidly registered to the individually registered discs and vertebrae. Comparison of the automatic and manual segmentations led to dice-scores of 0.93-0.96 for all vertebrae and discs. The lowest dice-score was in the disc at the height of the implant where artifacts led to under-segmentation. The mean distance between the morphed meshes and the segmentations was below 1 mm. In conclusion, the presented method can be used to automatically generate accurate subject-specific spine models.

Effectiveness of BMP-2 and PDGF-BB Adsorption onto a Collagen/Collagen-Magnesium-Hydroxyapatite Scaffold in Weight-Bearing and Non-Weight-Bearing Osteochondral Defect Bone Repair: In Vitro, Ex Vivo and In Vivo Evaluation

Despite promising clinical results in osteochondral defect repair, a recently developed bi-layered collagen/collagen-magnesium-hydroxyapatite scaffold has demonstrated less optimal subchondral bone repair. This study aimed to improve the bone repair potential of this scaffold by adsorbing bone morphogenetic protein 2 (BMP-2) and/or platelet-derived growth factor-BB (PDGF-BB) onto said scaffold. The in vitro release kinetics of BMP-2/PDGF-BB demonstrated that PDGF-BB was burst released from the collagen-only layer, whereas BMP-2 was largely retained in both layers. Cell ingrowth was enhanced by BMP-2/PDFG-BB in a bovine osteochondral defect ex vivo model. In an in vivo semi-orthotopic athymic mouse model, adding BMP-2 or PDGF-BB increased tissue repair after four weeks. After eight weeks, most defects were filled with bone tissue. To further investigate the promising effect of BMP-2, a caprine bilateral stifle osteochondral defect model was used where defects were created in weight-bearing femoral condyle and non-weight-bearing trochlear groove locations. After six months, the adsorption of BMP-2 resulted in significantly less bone repair compared with scaffold-only in the femoral condyle defects and a trend to more bone repair in the trochlear groove. Overall, the adsorption of BMP-2 onto a Col/Col-Mg-HAp scaffold reduced bone formation in weight-bearing osteochondral defects, but not in non-weight-bearing osteochondral defects.

Evaluation of prognostic risk models for postoperative pulmonary complications in adult patients undergoing major abdominal surgery: a systematic review and international external validation cohort study

BACKGROUND

Stratifying risk of postoperative pulmonary complications after major abdominal surgery allows clinicians to modify risk through targeted interventions and enhanced monitoring. In this study, we aimed to identify and validate prognostic models against a new consensus definition of postoperative pulmonary complications.

METHODS

We did a systematic review and international external validation cohort study. The systematic review was done in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. We searched MEDLINE and Embase on March 1, 2020, for articles published in English that reported on risk prediction models for postoperative pulmonary complications following abdominal surgery. External validation of existing models was done within a prospective international cohort study of adult patients (≥18 years) undergoing major abdominal surgery. Data were collected between Jan 1, 2019, and April 30, 2019, in the UK, Ireland, and Australia. Discriminative ability and prognostic accuracy summary statistics were compared between models for the 30-day postoperative pulmonary complication rate as defined by the Standardised Endpoints in Perioperative Medicine Core Outcome Measures in Perioperative and Anaesthetic Care (StEP-COMPAC). Model performance was compared using the area under the receiver operating characteristic curve (AUROCC).

FINDINGS

In total, we identified 2903 records from our literature search; of which, 2514 (86·6%) unique records were screened, 121 (4·8%) of 2514 full texts were assessed for eligibility, and 29 unique prognostic models were identified. Nine (31·0%) of 29 models had score development reported only, 19 (65·5%) had undergone internal validation, and only four (13·8%) had been externally validated. Data to validate six eligible models were collected in the international external validation cohort study. Data from 11 591 patients were available, with an overall postoperative pulmonary complication rate of 7·8% (n=903). None of the six models showed good discrimination (defined as AUROCC ≥0·70) for identifying postoperative pulmonary complications, with the Assess Respiratory Risk in Surgical Patients in Catalonia score showing the best discrimination (AUROCC 0·700 [95% CI 0·683-0·717]).

INTERPRETATION

In the pre-COVID-19 pandemic data, variability in the risk of pulmonary complications (StEP-COMPAC definition) following major abdominal surgery was poorly described by existing prognostication tools. To improve surgical safety during the COVID-19 pandemic recovery and beyond, novel risk stratification tools are required.

FUNDING

British Journal of Surgery Society.

Molecular typing of enteroviruses: comparing 5'UTR, VP1 and whole genome sequencing methods

Enteroviruses (EV) commonly cause hand, foot and mouth disease (HFMD), and can also cause potentially fatal neurological and systemic complications. In our laboratory, sequencing 5' untranslated region (UTR) of the viral genome has been the routine method of genotyping EVs. During a recent localised outbreak of aseptic meningitis, sequencing the 5'UTR identified the causative virus as EV-A71, which did not fit with the clinical syndrome or illness severity. When genotyped using a different target gene, VP1, the result was different. This led us to evaluate the accuracy of the two different target genome regions and compare them against whole genome sequencing (WGS). We aimed to optimise the algorithm for detection and characterisation of EVs in the diagnostic laboratory. We hypothesised that VP1 and WGS genotyping would provide different results than 5'UTR in a subset of samples. Clinical samples from around New South Wales which were positive for EV by commercial polymerase chain reaction (PCR) assays were genotyped by targeting three different viral genome regions: the 5'UTR, VP1 and WGS. Sequencing was performed by Sanger and next generation sequencing. The subtyping results were compared. Of the 74/118 (63%) samples that were successfully typed using both the 5'UTR and the VP1 method, the EV typing result was identical for 46/74 (62%) samples compared to WGS as the gold standard. The same EV group but different EV types were found in 22/74 (30%) samples, and 6/74 (8%) samples belonged to different EV groups depending on typing method used. Genotyping with WGS and VP1 is more accurate than 5'UTR. Genotyping by the 5'UTR method is very sensitive, but less specific.

The Hydration State of Bone Tissue Affects Contrast in Neutron Tomographic Images

Neutron tomography has emerged as a promising imaging technique for specific applications in bone research. Neutrons have a strong interaction with hydrogen, which is abundant in biological tissues, and they can penetrate through dense materials such as metallic implants. However, in addition to long imaging times, two factors have led to challenges in running in situ mechanical characterization experiments on bone tissue using neutron tomography: 1) the high water content in specimens reduces the visibility of internal trabecular structures; 2) the mechanical properties of bone are dependent on the hydration state of the tissue, with drying being reported to cause increased stiffness and brittleness. This study investigates the possibility of improving image quality in terms of neutron transmission and contrast between material phases by drying and rehydrating in heavy water. Rat tibiae and trabecular bovine bone plugs were imaged with neutron tomography at different hydration states and mechanical testing of the bone plugs was carried out to assess effects of drying and rehydration on the mechanical properties of bone. From analysis of image histograms, it was found that drying reduced the contrast between bone and soft tissue, but the contrast was restored with rehydration. Contrast-to-noise ratios and line profiles revealed that the contrast between bone tissue and background was reduced with increasing rehydration duration but remained sufficient for identifying internal structures as long as no free liquid was present inside the specimen. The mechanical analysis indicated that the proposed fluid exchange protocol had no adverse effects on the mechanical properties.

A New Augmentation Method for Improved Screw Fixation in Fragile Bone

Pertrochanteric fractures (TF) due to osteoporosis constitute nearly half of all proximal femur fractures. TFs are treated with a surgical approach and fracture fixation is achieved using metallic fixation devices. Poor quality cancellous bone in osteoporotic patients makes anchorage of a fixation device challenging, which can lead to failure of the fracture fixation. Methods to reinforce the bone-implant interface using bone cement (PMMA) and other calcium phosphate cements in TFs have been described earlier but a clear evidence on the advantage of using such biomaterials for augmentation is weak. Furthermore, there is no standardized technique for delivering these biomaterials at the bone-implant interface. In this study, we firstly describe a method to deliver a calcium sulphate/hydroxyapatite (CaS/HA) based biomaterial for the augmentation of a lag-screw commonly used for TF fixation. We then used an osteoporotic Sawbones model to study the consequence of CaS/HA augmentation on the immediate mechanical anchorage of the lag-screw to osteoporotic bone. Finally, as a proof-of-concept, the method of delivering the CaS/HA biomaterial at the bone-implant interface as well as spreading of the CaS/HA material at this interface was tested in patients undergoing treatment for TF as well as in donated femoral heads. The mechanical testing results indicated that the CaS/HA based biomaterial increased the peak extraction force of the lag-screw by 4 times compared with un-augmented lag-screws and the results were at par with PMMA. The X-ray images from the patient series showed that it was possible to inject the CaS/HA material at the bone-implant interface without applying additional pressure and the CaS/HA material spreading was observed at the interface of the lag-screw threads and the bone. Finally, the spreading of the CaS/HA material was also verified on donated femoral heads and micro-CT imaging indicated that the entire length of the lag-screw threads was covered with the CaS/HA biomaterial. In conclusion, we present a novel method for augmenting a lag-screw in TFs, which could potentially reduce the risk of fracture fixation failure and reoperation in fragile osteoporotic patients.

Augmenting a dynamic hip screw with a calcium sulfate/hydroxyapatite biomaterial

Internal fixation failure in hip fractures can lead to reoperation. Calcium sulfate/hydroxyapatite (CaS/HA) is a biomaterial that can be used for augmenting fracture fixation. We aimed to determine whether an injection of 2 ml CaS/HA increases the fixation of a dynamic hip screw inserted in synthetic and human trabecular bone. The study consists of two parts: 1) synthetic bone blocks (n = 74), with three subgroups: empty (cannulated screw, no injection), cannulated, and fenestrated; and 2) osteoporotic human femoral heads (n = 29), with the same subgroups. The heads were imaged using µCT. Bone volume fraction, insertion angle, and head diameter were measured. Pullout tests were performed and peak force, stiffness, and work were measured. The fenestrated group showed increases in pullout strength compared to no injection in the synthetic blocks. The cannulated group showed a higher pullout strength in low-density blocks. In the femoral heads, the variation was larger and there were no significant differences between groups. The bone volume fraction correlated with the peak force and work, and the insertion angle correlated with the stiffness. CaS/HA can improve the fixation of a dynamic hip screw. For clinical use, spreading of the material around the threads of the screw must be ensured.

Femoral strength and strains in sideways fall: Validation of finite element models against bilateral strain measurements

Low impact falls to the side are the main cause of hip fractures in elderly. Finite element (FE) models of the proximal femur may help in the assessment of patients at high risk for a hip fracture. However, extensive validation is essential before these models can be used in a clinical setting. This study aims to use strain measurements from bilateral digital image correlation to validate an FE model against ex vivo experimental data of proximal femora under a sideways fall loading condition. For twelve subjects, full-field strain measurements were available on the medial and lateral side of the femoral neck. In this study, subject-specific FE models were generated based on a consolidated procedure previously validated for stance loading. The material description included strain rate dependency and separate yield and fracture strain limits in tension and compression. FE predicted fracture force and experimentally measured peak forces showed a strong correlation (R² = 0.92). The FE simulations predicted the fracture initiation within 3 mm distance of the experimental fracture line for 8/12 subjects. The predicted and measured strains correlated well on both the medial side (R² = 0.87) and the lateral side (R² = 0.74). The lower correlation on the lateral side is attributed to the irregularity of the cortex and presence of vessel holes in this region. The combined validation against bilateral full-field strain measurements and peak forces has opened the door for a more elaborate qualitative and quantitative validation of FE models of femora under sideways fall loading.

Laboratory diagnosis of severe acute respiratory syndrome coronavirus 2

The first laboratory confirmed case of Coronavirus disease 2019 (COVID-19) in Australia was in Victoria on 25 January 2020 in a man returning from Wuhan city, Hubei province, the People's Republic of China. This was followed by three cases in New South Wales the following day. The Australian Government activated the Australian Health Sector Emergency Response Plan for Novel Coronavirus on 27 February 2020 in anticipation of a pandemic. Subsequently, the World Health Organization declared COVID-19 to be a Public Health Emergency of International Concern followed by a pandemic on 30 January 2020 and 11 March 2020, respectively. Laboratory testing for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the virus responsible for COVID-19, is key in identifying infected persons to guide timely public health actions of contact tracing and patient isolation to limit transmission of infection. This article aims to provide a comprehensive overview of current laboratory diagnostic methods for SARS-CoV-2, including nucleic acid testing, serology, rapid antigen detection and antibody tests, virus isolation and whole genome sequencing. The relative advantages and disadvantages of the different diagnostic tests are presented, as well as their value in different clinical, infection control and public health contexts. We also describe the challenges in the provision of SARS-CoV-2 diagnostics in Australia, a country with a relatively low COVID-19 incidence in the first pandemic wave but in which prevalence could rapidly change.

Is it or is it not? Lessons learned from a case of suspected vaccine strain measles

Background

Measles continues to be a threat to Australia. While post eradication risks are low, imported measles cases from overseas travellers who are non-immune can cause small outbreaks. This case report discusses the challenge of identifying wild-type measles in an individual who was recently vaccinated with measles - containing vaccine (MCV).

Methods

A positive polymerase chain reaction (PCR) result for measles for an adult who had recently received a measles -containing vaccine was notified. Investigation revealed no known epidemiological link, recent overseas travel or contact with recent measles cases during the incubation period.

Results

The results of the initial sequencing to distinguish between wild-type and vaccine-strain measles were inconclusive. A decision was made to re-run the genotyping, collect additional specimens, and quarantine the case until a definitive result was obtained. Sequencing and genotyping revealed that this indeed was a wild-type measles strain.

Conclusions

Changing epidemiology of measles means distinguishing between wild-type and vaccine-strain measles has become a new challenge. The reflection of the public health management of this case has provided is a valuable teaching tool for public health professionals globally, particularly in low incidence measles countries.

Key messages

The lack of an epidemiological link can create confusion for public health staff when investigating possible measles cases. Changes in the epidemiology of measles means distinguishing between wild type and vaccine strain measles is a challenge.

Fracture strength of the proximal femur injected with a calcium sulfate/hydroxyapatite bone substitute

BACKGROUND

Available interventions for preventing fragility hip fractures show limited efficacy. Injection of a biomaterial as bone substitute could increase the fracture strength of the hip. This study aimed to show the feasibility of injecting a calcium sulfate/hydroxyapatite based biomaterial in the femoral neck and to calculate the consequent change in strength using the finite element method.

METHODS

Five patients were injected with 10 ml calcium sulfate/hydroxyapatite in their femoral neck. Quantitative CT scans were taken before and after injection. Five additional patients with fragility hip fractures were also scanned and the images from the non-fractured contralateral sides were used. Finite element models were created for all proximal femora with and without injection and the models were tested under stance and sideways fall loading until fracture. The change in fracture strength caused by the injection was calculated. Additionally, perturbations in volume, location, and stiffness of the injected material were created to investigate their contribution to the fracture strength increase.

FINDINGS

The 10 ml injection succeeded in all patients. Baseline simulations showed theoretical fracture strength increases of 0-9%. Volume increase, change in location and increase in stiffness of the material led to increases in fracture strength of 1-27%, -8-26% and 0-17%, respectively. Altering the location of the injection to a more lateral position and increasing the stiffness of the material led to increases in fracture strength of up to 42%.

INTERPRETATION

This study shows that an injection of calcium sulfate/hydroxyapatite is feasible and can theoretically increase the hip's fracture strength.

Transcriptomic approach and membrane fatty acid analysis to study the response mechanisms of Escherichia coli to thyme essential oil, carvacrol, 2-(E)-hexanal and citral exposure

AIMS

The application of essential oils (EOs) and their components as food preservatives is promising but requires a deeper understanding of their mechanisms of action. This study aims to evaluate the effects of thyme EO, carvacrol, citral and 2-(E)-hexenal, on whole-genome gene expression (the transcriptome), as well as the fatty acid (FA) composition of the cell membranes of Escherichia coli K12.

METHODS AND RESULTS

Therefore, we studied the response against 1 h of exposure to sublethal concentrations of natural antimicrobials, of exponentially growing E. coli K12, using DNA microarray technology and a gas chromatographic method. The results show that treatment with a sublethal concentration of the antimicrobials strongly affects global gene expression in E. coli for all antimicrobials used. Major changes in the expression of genes involved in metabolic pathways as well as in FA biosynthesis and protection against oxidative stress were evidenced. Moreover, the sublethal treatments resulted in increased levels of unsaturated and cyclic FAs as well as an increase in the chain length compared to the controls.

CONCLUSIONS

The down-regulation of genes involved in aerobic metabolism indicates a shift from respiration to fermentative growth. Moreover, the results obtained suggest that the cytoplasmic membrane of E. coli is the major cellular target of EOs and their components. In addition, the key role of membrane unsaturated FAs in the response mechanisms of E. coli to natural antimicrobials has been confirmed in this study.

SIGNIFICANCE AND IMPACT OF THE STUDY

The transcriptomic data obtained signify a further step to understand the mechanisms of action of natural antimicrobials also when sublethal concentrations and short-term exposure. In addition, this research goes in deep correlating the transcriptomic modification with the changes in E. coli FA composition of cell membrane identified as the main target of the natural antimicrobials.

Increased prevalence of influenza B/Victoria lineage viruses during early stages of the 2015 influenza season in New South Wales, Australia: implications for vaccination and planning

During the early weeks of the 2015 Australian influenza season, influenza B accounted for 67% (821/1,234) of all positive influenza tests in New South Wales. Of 81 successive influenza B viruses characterised, 33 (41%) were from children aged < 16 years; 23/81 (28%) belonged to the B/Victoria lineage. This lineage is not contained in the southern hemisphere's 2015 trivalent influenza vaccine. The significant B/Victoria lineage activity in the southern hemisphere suggests that the quadrivalent vaccine should be considered for the northern hemisphere.

Developments in early intervention for psychosis in Hong Kong

The year 2011 marked the 10-year milestone of early intervention for psychosis in Hong Kong. Since 2001, the landscape of early psychosis services has changed markedly in Hong Kong. Substantial progress has been made in the areas of early intervention service implementation, knowledge generation, and public awareness promotion. Favourable outcomes attributable to the early intervention service are supported by solid evidence from local clinical research studies; early intervention service users showed improved functioning, ameliorated symptoms, and decreased hospitalisation and suicide rates. Continued development of early intervention in Hong Kong over the decade includes the introduction and maturation of several key platforms, such as the Hospital Authority Early Assessment Service for Young People with Psychosis programme, the Psychosis Studies and Intervention Unit by the University of Hong Kong, the Hong Kong Early Psychosis Intervention Society, the Jockey Club Early Psychosis Project, and the postgraduate Psychological Medicine (Psychosis Studies) programme. In this paper, we reviewed some of the major milestones in local service development with reference to features of the Hong Kong mental health system. We describe chronologically the implementation and consolidation of public early intervention services as well as recent progresses in public awareness work that are tied in with knowledge generation and transfer, and outline the prospects for early intervention in the next decade and those that follow.

Reliability, sensitivity and responsiveness of the Infant Behavioral Assessment in very preterm infants

AIM

The aim of this study is to investigate the reliability, sensitivity and responsiveness of the Infant Behavioral Assessment (IBA) to evaluate neurobehavioural organization in very preterm infants.

METHODS

Videotaped assessments of very preterm infants participating in a recent trial served to evaluate a standardized IBA observation. Inter-rater reliability was based on 40 videos scored by two independent observers, using percentage agreement and weighted Kappa's. Sensitivity was evaluated by comparing the IBA results of 169 infants at 35-38 weeks postmenstrual age, dichotomized according to two developmental risk factors. For responsiveness, the effect size (ES) was calculated between 0 and 6 months corrected age in all intervention and control infants and in subgroups of high-risk intervention and control infants with oxygen dependency ≥28 days.

RESULTS

Inter-rater agreement was 93% in the total assessment; Kappa agreement was moderate to good in the behavioural categories. Significant differences were found between groups with or without risk factors. Larger differences between ESs in the randomized groups with oxygen dependency ≥28 days than in the total randomized groups reflect the responsiveness of the IBA.

CONCLUSION

In this study, we found satisfactory to good clinimetric characteristics of the IBA in very preterm born infants.

The Mode of Replication Is a Major Factor in Segregational Plasmid Instability in Lactococcus lactis

The effects of the rolling-circle and theta modes of replication on the maintenance of recombinant plasmids in Lactococcus lactis were studied. Heterologous Escherichia coli or bacteriophage lambda DNA fragments of various sizes were inserted into vectors based on either the rolling-circle-type plasmid pWV01 or the theta-type plasmid pAMbeta1. All pAMbeta1 derivatives were stably maintained. pWV01 derivatives, however, showed size-dependent segregational instability, in particular when large DNA fragments were inserted. All recombinant pWV01 derivatives generated high-molecular-weight plasmid multimers (HMW) in amounts that were positively correlated with plasmid size and inversely correlated with the copy numbers of the monomeric plasmid forms. Formation of HMW or reductions in copy numbers were not observed with pAMbeta1 derivatives. The results indicate that HMW formation and/or reduction in plasmid copy numbers is an important factor in the maintenance of pWV01 derivatives. It is concluded that theta-type plasmids are superior to rolling-circle-type plasmids for cloning in lactococci.