Achievement of Target Gain Larger than Unity in an Inertial Fusion Experiment

On December 5, 2022, an indirect drive fusion implosion on the National Ignition Facility (NIF) achieved a target gain G_{target} of 1.5. This is the first laboratory demonstration of exceeding "scientific breakeven" (or G_{target}>1) where 2.05 MJ of 351 nm laser light produced 3.1 MJ of total fusion yield, a result which significantly exceeds the Lawson criterion for fusion ignition as reported in a previous NIF implosion [H. Abu-Shawareb et al. (Indirect Drive ICF Collaboration), Phys. Rev. Lett. 129, 075001 (2022)PRLTAO0031-900710.1103/PhysRevLett.129.075001]. This achievement is the culmination of more than five decades of research and gives proof that laboratory fusion, based on fundamental physics principles, is possible. This Letter reports on the target, laser, design, and experimental advancements that led to this result.

Improving Interprofessional Collaboration Between Social Work and Pharmacy Through Hybrid and Virtual Learning Experiences

The professions of pharmacy and social work are not generally assumed to directly collaborate in patient care; however, these professions are complementary. Health and wellbeing outcomes are significantly improved when care is managed by an interprofessional team that communicates and collaborates to ensure all aspects of care are effectively managed. The creation of educational opportunities for students to practice working together provides enhanced educational experiences and leads to their success as professionals. Pharmacy and social work faculty developed an interprofessional education activity specifically aimed at integrative student learning. Faculty and students based on various islands throughout the state of Hawai'i and the US territory of Guam participated in the experience. The case study encouraged interprofessional teamwork and collaboration. The case study also challenged students to share profession-specific knowledge with each other. Mean evaluation scores were compared between hybrid and fully online platforms. Evaluation scores were high and at least as good or higher in the fully online exercise compared to the hybrid exercises. Using the 20-item pre-post format, Interprofessional Collaborative Competencies Attainment Survey, results indicated statistically significant improvements in scores for all questions and domains (all P<.001). When hybrid training and fully online training were compared, there were no significant differences in pre scores, but post domain scores were significantly higher in students who experienced fully online training. This interprofessional case-based activity successfully promoted interprofessional learning and collaboration. Introducing learners to this type of collaborative practice while in school is critical for future collaboration in the workforce.

Imaging in gynecological disease (26): clinical and ultrasound characteristics of benign retroperitoneal pelvic peripheral-nerve-sheath tumors

OBJECTIVE

To describe the clinical and sonographic characteristics of benign, retroperitoneal, pelvic peripheral-nerve-sheath tumors (PNSTs).

METHODS

This was a retrospective study of patients with a benign, retroperitoneal, pelvic PNST who had undergone preoperative ultrasound examination at a single gynecologic oncology center between 1 January 2018 and 31 August 2022. All ultrasound images, videoclips and final histological specimens of benign PNSTs were reviewed side-by-side in order to: describe the ultrasound appearance of the tumors, using the terminology of the International Ovarian Tumor Analysis (IOTA), Morphological Uterus Sonographic Assessment (MUSA) and Vulvar International Tumor Analysis (VITA) groups, following a predefined ultrasound assessment form; describe their origin in relation to nerves and pelvic anatomy; and assess the association between their ultrasound features and histotopography. A review of the literature reporting benign, retroperitoneal, pelvic PNSTs with preoperative ultrasound examination was performed.

RESULTS

Five women (mean age, 53 years) with a benign, retroperitoneal, pelvic PNST were identified, four with a schwannoma and one with a neurofibroma, of which all were sporadic and solitary. All patients had good-quality ultrasound images and videoclips and final biopsy of surgically excised tumors, except one patient managed conservatively who had only a core needle biopsy. In all cases, the findings were incidental. The five PNSTs ranged in maximum diameter from 31 to 50 mm. All five PNSTs were solid, moderately vascular tumors, with non-uniform echogenicity, well-circumscribed by hyperechogenic epineurium and with no acoustic shadowing. Most of the masses were round (n = 4 (80%)), and contained small, irregular, anechoic, cystic areas (n = 3 (60%)) and hyperechogenic foci (n = 5 (100%)). In the woman with a schwannoma in whom surgery was not performed, follow-up over a 3-year period showed minimal growth (1.5 mm/year) of the mass. We also summarize the findings of 47 cases of benign retroperitoneal schwannoma and neurofibroma identified in a literature search.

CONCLUSIONS

On ultrasound examination, no imaging characteristics differentiate reliably between benign schwannomas and neurofibromas. Moreover, benign PNSTs show some similar features to malignant retroperitoneal tumors. They are solid lesions with intralesional blood vessels and show degenerative changes such as cystic areas and hyperechogenic foci. Therefore, ultrasound-guided biopsy may play a pivotal role in their diagnosis. If confirmed to be benign PNSTs, these tumors can be managed conservatively, with ultrasound surveillance. © 2023 The Authors. Ultrasound in Obstetrics & Gynecology published by John Wiley & Sons Ltd on behalf of International Society of Ultrasound in Obstetrics and Gynecology.

Smoothing tool design and performance during subaperture glass polishing

During subaperture tool grinding and polishing, overlaps of the tool influence function can result in undesirable mid-spatial frequency (MSF) errors in the form of surface ripples, which are often corrected using a smoothing polishing step. In this study, flat multi-layer smoothing polishing tools are designed and tested to simultaneously (1) reduce or remove MSF errors, (2) minimize surface figure degradation, and (3) maximize the material removal rate. A time-dependent convergence model in which spatial material removal varies with a workpiece-tool height mismatch, combined with a finite element mechanical analysis to determine the interface contact pressure distribution, was developed to evaluate various smoothing tool designs as a function of tool material properties, thicknesses, pad textures, and displacements. An improvement in smoothing tool performance is achieved when the gap pressure constant, h¯ (which describes the inverse rate at which the pressure drops with a workpiece-tool height mismatch), is minimized for smaller spatial scale length surface features (namely, MSF errors) and maximized for large spatial scale length features (i.e., surface figure). Five specific smoothing tool designs were experimentally evaluated. A two-layer smoothing tool using a thin, grooved IC1000 polyurethane pad (with a high elastic modulus, E _{p a d} =360M P a), thicker blue foam (with an intermediate modulus, E _{f o a m} =5.3M P a) underlayer, and an optimized displacement (d _t=1m m) provided the best overall performance (namely, high MSF error convergence, minimal surface figure degradation, and high material removal rate).

Increasing the Self-Confidence of School Nurses to Respond to Emergency Situations

BACKGROUND

School nurses have various degrees of experience responding to respiratory or cardiac emergencies, and most only receive Basic Life Support training every 2 years as required. The goal of the study was to assess school nurses' confidence and competence in emergency situations before and after engaging in emergency preparedness high-fidelity simulations.

METHOD

This mixed methods study used a pre-/postsimulation survey design for a group of school nurses (N = 40) in the State of Hawaii. The pre- and postsimulation survey assessed professional demographics and measured confidence. After the presimulation survey, nurses participated in a 1-day training that included two separate emergency simulations using high-fidelity equipment. In addition, education was provided on the program's standardized emergency supply bags with equipment and their use during an emergency. The postsimulation survey was distributed 5 days after the educational intervention.

RESULTS

All confidence items significantly improved after the simulation session. Nurses noted the value of the training and hands-on simulation experience.

CONCLUSION

Simulation is a useful tool for increasing school nurses' confidence in responding to emergencies occurring on school campuses. [J Contin Educ Nurs. 2023;54(2):71-77.].

Interprofessional telehealth simulations for pharmacy and nursing students: Development and evaluation of an online experience

INTRODUCTION

The authors evaluated student achievement of interprofessional education (IPE) core competencies during two formats (one hybrid and one completely online) of an IPE simulation designed for pharmacy and nursing students.

METHODS

This IPE simulation was designed to teach students to use distance technologies to collaborate on patient care. In 2019, pharmacy (n = 83) and nursing (n = 38) students attended the hybrid (in-person and online) IPE simulation (SIM 2019) with the use of a telepresence robot. In 2020, pharmacy (n = 78) and nursing (n = 48) students attended the simulations completely online (SIM 2020), without the use of a robot. Both sessions aimed to achieve IPE core competencies through interprofessional student collaboration sessions using telehealth distance technologies. Students completed quantitative and qualitative evaluation surveys for both simulations. During SIM 2020, faculty and students used an observation tool to directly assess student team collaboration skills.

RESULTS

Statistically significant improvements in self-assessment of IPE core competency scores were found in both formats of the simulation sessions. There were no statistical differences in faculty ratings with student ratings of team skills using the direct observation of team collaboration. Qualitative results indicated that students found interprofessional collaboration to be the most important lesson learned from the activity.

CONCLUSIONS

Both formats for the simulation achieved core competency learning objectives. IPE is an essential experience for health care education and is achievable online.

Understanding the tool influence function during sub-aperture belt-on-wheel glass polishing

The tool influence function (TIF) during sub-aperture belt-on-wheel polishing has been evaluated as a function of various process conditions (belt use/wear, dwell time, displacement, belt velocity, and wheel modulus and diameter) on fused silica glass workpieces using C e O ₂ polishing media. TIF spots are circular or elliptical in shape with a largely flat bottom character. The volumetric removal rate varies significantly with belt use (or wear), stabilizing after ∼15m i n of use. A modified Preston model, where the pressure dependence is adjusted using a different scaling of the wheel modulus (E w0.5), largely predicts the volumetric removal rate over the range of process conditions evaluated. The relatively high volumetric removal rate of 30-60m m ³/h using a fixed C e O ₂-in-resin-host belt offers a rapid, and hence, more economical, initial polish of aspheric and freeform optics.

Lawson Criterion for Ignition Exceeded in an Inertial Fusion Experiment

For more than half a century, researchers around the world have been engaged in attempts to achieve fusion ignition as a proof of principle of various fusion concepts. Following the Lawson criterion, an ignited plasma is one where the fusion heating power is high enough to overcome all the physical processes that cool the fusion plasma, creating a positive thermodynamic feedback loop with rapidly increasing temperature. In inertially confined fusion, ignition is a state where the fusion plasma can begin "burn propagation" into surrounding cold fuel, enabling the possibility of high energy gain. While "scientific breakeven" (i.e., unity target gain) has not yet been achieved (here target gain is 0.72, 1.37 MJ of fusion for 1.92 MJ of laser energy), this Letter reports the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce capsule gain (here 5.8) and reach ignition by nine different formulations of the Lawson criterion.

Impact of replacing or adding pregnancy-associated plasma protein-A at 11-13 weeks on screening for preterm pre-eclampsia

OBJECTIVE

To assess whether pregnancy-associated plasma protein-A (PAPP-A) alters or provides equivalent screening performance as placental growth factor (PlGF) when screening for preterm pre-eclampsia (PE) at 11-13 weeks of gestation.

METHODS

This was a secondary analysis of a non-intervention screening study of 6546 singleton pregnancies that were screened prospectively for preterm PE in the first trimester between December 2016 and June 2018. Patient-specific risks for preterm PE were estimated by maternal history, mean arterial pressure (MAP), uterine artery pulsatility index (UtA-PI), PlGF and PAPP-A. A competing-risks model with biomarkers expressed as multiples of the median was used. All women and clinicians were blinded to the risk for preterm PE. The performance of screening for preterm PE using PlGF vs PAPP-A vs both PAPP-A and PlGF was assessed by comparing areas under the receiver-operating-characteristics (AUC) curves. McNemar's test was used to compare detection rate at a fixed false-positive rate (FPR) of 10%.

RESULTS

PlGF and PAPP-A were measured in 6546 women, of whom 37 developed preterm PE. The AUC and detection rate at 10% FPR using PlGF in combination with maternal history, MAP and UtA-PI were 0.854 and 59.46%, respectively. The respective values were 0.813 and 51.35% when replacing PlGF with PAPP-A and 0.855 and 59.46% when using both PAPP-A and PlGF. Statistically non-significant differences were noted in AUC when replacing PlGF with PAPP-A (ΔAUC, 0.04; P = 0.095) and when using both PAPP-A and PlGF (ΔAUC, 0.002; P = 0.423). However, on an individual case basis, screening using PlGF in conjunction with maternal history, MAP and UtA-PI identified three (8.1%) additional pregnancies that developed preterm PE and that were not identified when replacing PlGF with PAPP-A. Screening using PAPP-A in addition to maternal history and other biomarkers did not identify any additional pregnancies.

CONCLUSION

On an individual case basis, adoption of a screening strategy that uses PAPP-A instead of PlGF results in reduced detection of preterm PE, consistent with previous literature. © 2022 International Society of Ultrasound in Obstetrics and Gynecology.

Exploring the diagnostic utility of genome sequencing for fetal congenital heart defects

OBJECTIVE

The diagnostic yield for congenital heart defects (CHD) with routine genetic testing is around 10-20% when considering the pathogenic CNVs or aneuploidies as positive findings. This is a pilot study to investigate the utility of genome sequencing (GS) for prenatal diagnosis of CHD.

METHODS

Genome sequencing (GS, 30X) was performed on 13 trios with CHD for which karyotyping and/or chromosomal microarray results were non-diagnostic.

RESULTS

Trio GS provided a diagnosis for 4/13 (30.8%) fetuses with complex CHDs and other structural anomalies. Findings included pathogenic or likely pathogenic variants in DNAH5, COL4A1, PTPN11, and KRAS. Of nine cases without a possibly genetic etiology by GS, we had follow-up on eight. For five of them (60%), the parents chose to keep the pregnancy. A balanced translocation [46,XX,t(14;22)(q32.33;q13.31)mat] was detected in a trio with biallelic DNAH5 mutations, which together explained the recurrent fetal situs inversus and dextrocardia that was presumably due to de novo Phelan-McDermid syndrome. A secondary finding of a BRCA2 variant and carrier status of HBB, USH2A, HBA1/HBA2 were detected in the trio.

CONCLUSIONS

GS expands the diagnostic scope of mutation types over conventional testing, revealing the genetic etiology for fetal heart anomalies. Patients without a known genetic abnormality indicated by GS likely opted to keep pregnancy especially if the heart issue could be repaired. We provide evidence to support the application of GS for fetuses with CHD. This article is protected by copyright. All rights reserved.

Understanding and reducing mid-spatial frequency ripples during hemispherical sub-aperture tool glass polishing

During sub-aperture tool polishing of glass optics, mid-spatial surface ripples are generated because of material removal non-uniformities during tool linear translation (resulting in feed ripples) and tool pathway step overlaps (resulting in pitch ripples). A variety of tool influence function (TIF) spots, trenches, and patches were created to understand and minimize such ripples on fused silica workpieces after polishing with cerium oxide slurry using a rotating hemispherical pad-foam tool. The feed ripple amplitude can be decreased by reducing the non-uniformities in the pad texture and/or by minimizing a derived feed ripple metric (r_f=Vmax0.5V_f/R_t) via adjustments in processing parameters. Pitch ripples can be minimized by reducing relative step distance to spot radius ratio (x_s/a_t) and by achieving a flat bottom trench shape cross section or by reducing the material removal per pass. Using the combined methods, an overall ripple error of ∼1.2nm rms has been achieved.

Transperineal ultrasound assessment of fetal head elevation by maneuvers used for managing umbilical cord prolapse

OBJECTIVE

To assess objectively the degree of fetal head elevation achieved by different maneuvers commonly used for managing umbilical cord prolapse.

METHODS

This was a prospective observational study of pregnant women at term before elective Cesarean delivery. A baseline assessment of fetal head station was performed with the woman in the supine position, using transperineal ultrasound for measuring the parasagittal angle of progression (psAOP), head-symphysis distance (HSD) and head-perineum distance (HPD). The ultrasonographic measurements of fetal head station were repeated during different maneuvers, including elevation of the maternal buttocks using a wedge, knee-chest position, Trendelenburg position with a 15° tilt and filling the maternal urinary bladder with 100 mL, 300 mL and 500 mL of normal saline. The measurements obtained during the maneuvers were compared with the baseline measurements.

RESULTS

Twenty pregnant women scheduled for elective Cesarean section at term were included in the study. When compared with baseline (median psAOP, 103.6°), the knee-chest position gave the strongest elevation effect, with the greatest reduction in psAOP (psAOP, 80.7°; P < 0.001), followed by filling the bladder with 500 mL (psAOP, 89.9°; P < 0.001) and 300 mL (psAOP, 94.4°; P < 0.001) of normal saline. Filling the maternal bladder with 100 mL of normal saline (psAOP, 96.1°; P = 0.001), the Trendelenburg position (psAOP, 96.8°; P = 0.014) and elevating the maternal buttocks (psAOP, 98.3°; P = 0.033) gave modest elevation effects. Similar findings were reported for HSD and HPD. The fetal head elevation effects of the knee-chest position, Trendelenburg position and elevation of the maternal buttocks were independent of the initial fetal head station, but that of bladder filling was greater when the initial head station was low.

CONCLUSIONS

To elevate the fetal presenting part, the knee-chest position provides the best effect, followed by filling the maternal urinary bladder with 500 mL then 300 mL of fluid, respectively. Filling the bladder with 100 mL of fluid, the Trendelenburg position and elevation of the maternal buttocks have modest effects. © 2020 International Society of Ultrasound in Obstetrics and Gynecology.

152 Evaluating the Incidence and Predictors of Readmission in Patients Awaiting Cholecystectomy for Previously Diagnosed Acute Gallstone Disease

Introduction

The prevalence of gallstones up to 15%.20-40% will develop symptomatic gallstones and occupy most of the surgical waiting list. The timing of a cholecystectomy remains controversial.

Method

Retrospective data analysis over 2 years, including: diagnosis, commodities, ASA class, investigations, readmissions numbers and causes, time to surgery, operative details, and rate of conversion to open procedures. Chi-square test was used for analysis.

Results

532 cholecystectomies were performed.44% of the patients had commodities. Presentations were; Acute cholecystitis (41.7%), biliary colic (23.1%), acute pancreatitis (15.9), obstructive jaundice (9.2%). USS was performed in 97.3%, CT scan in 17.8% and MRCP in 45.8%. 14% had ERCP. Re admission rate was 56.4%, between 1-6 times, secondary to; cholecystitis (12.5%), biliary colic (26.7), gallstone pancreatitis (8.2%), obstructive jaundice (8.0%), other complications (0.5-1.5%). Emergency cholecystectomy was performed in 14.9% with conversion rate 1.4%.major complication rate was 2.7. The median time on waiting list was 12 (0-123) weeks. This prolonged to 25 (0-400) weeks, when calculated at time of diagnosis. Complicated gallstones disease (p-value 0.0001) was predictors of recurrent symptoms and readmissions.

Conclusions

Management plan is due to optimize the timing of cholecystectomy to decrease the negative impact on readmission and complication rates plus the hospitals’ bed capacity and costs.

Effect of workpiece curvature on the tool influence function during hemispherical sub-aperture tool glass polishing

The influence of workpiece curvature on the tool influence function spot during polishing of fused silica glass with cerium oxide slurry, while using a rotating hemispherical pad-foam tool for a wide variety of process conditions (tool displacement, inclination angle, and rotation rate), has been investigated. (Workpiece curvature ranged from 500 mm radius concave to 43 mm radius convex.) The TIF spot decreases in diameter and increases in the peak removal rate on more convex workpieces. In contrast, the TIF spot increases both in diameter and peak removal rate on more concave workpieces. For the range of workpiece curvatures investigated, both the spot size and the peak removal rate changed significantly, as much as 2 times. An elastic sphere-sphere contact mechanics model, which utilizes both a modified displacement (that leads to a change in the applied load) as well as a mismatch factor (that influences the pressure distribution shape), has been developed. The model was validated using both offline load-displacement measurements and finite-element analysis simulations. The model quantitatively describes the measured change in the relative contact diameter and relative pressure distribution, as well as semiquantitively describes the change in the relative volumetric removal rate on a large variety of TIF spots. The change in the volumetric removal rate for convex workpieces is a result of the balance between a decreasing spot size (reducing removal) and an increasing peak pressure (increasing removal), which usually results in relatively small changes in volumetric removal. In the case of concave workpieces, the volumetric removal rate change is also governed by a similar balance, but the spot size increase contribution dominates, resulting in a significant increase in volumetric removal rate. Understanding these trends can enable methods to add greater determinism during the fabrication of freeform optics by adjusting polishing parameters (such as dwell time) while the tool translates along a workpiece surface with different local curvatures.

Titanium and implantology: a review in dentistry

Implant dentistry has become a popular restorative option in clinical practice. Titanium and titanium alloys (TTA) are the gold standard for endo-osseus dental implants production, thanks to their biocompatibility, resistance to corrosion and mechanical properties. The characteristics of the TTA implant surface seem to be particularly relevant in the early phase of osseointegration. Furthermore, the microstructure of implant surface can largely influence the bone remodelling at the level of the bone-implant surface. Recently, research has stated on the long-term of both survival and success rates of osseointegrated implants and mainly on biomechanical aspects, such as load distribution and biochemical and histological processes at the bone-implant interface. This short review reports recent knowledge on chemical and mechanical properties, biological aspects, innovations in preventing peri-implantitis, describing clinical applications and recent improvements of TTA dental implants. In addition, it highlights current knowledge about a new implant coating that has been demonstrated to reduce the number of initially adhering bacteria and peri-implantitis.

Mechanisms influencing and prediction of tool influence function spots during hemispherical sub-aperture tool polishing on fused silica

Sub-aperture tool polishing of precision optics requires a detailed understanding of the local material removal [tool influence function (TIF)] at the contact spot between the workpiece and tool to achieve high removal determinism and hence precision of the optic relative to the desired/design surface figure. In this study, the mechanisms influencing and the quantitative prediction of the removal rate and shape of TIF spots during polishing of fused silica glass with cerium oxide slurry using a rotating hemispherical pad-foam tool for a wide variety of process conditions (including tool properties, kinematics, and applied displacements) are investigated. The TIF volumetric removal rate can be estimated utilizing the average relative velocity and contact area using a simple analytical model. In addition, stability of the volumetric removal rate for fixed process conditions is shown to be greatly dependent on the pad preparation and amount of tool use (affecting both pad topography and slurry buildup), whose general behavior shows an increase in removal rate followed by stabilization with polishing time. The determination of the TIF removal shape is more complex. An extended version of the Preston removal model is developed to explain a comprehensive set of measured TIF removal shapes to within ∼22%. This model incorporates a number of phenomena impacting the TIF removal shape including: (a) temporal and spatial dependent relative velocity between the workpiece and tool; (b) an elastic mechanics based, as well as hydrodynamic, pressure distribution; (c) a spatially dependent friction coefficient possibly caused by both reduced slurry replenishment in low velocity regions and pad slurry islands (100 µm scale) and porosity (millimeter scale); and (d) a shear-based removal mechanism on the periphery of the contact spot.

People with Type Diabetes Mellitus (T1DM) self-reported views on their own condition management reveal links to potentially improved outcomes and potential areas for service improvement

BACKGROUND

The self-management of type 1 diabetes (T1DM) has moved forward in many areas over the last 40 years. Our study asked people with T1DM what is their experience of blood glucose (BG) monitoring day to day and how this influences decisions about insulin dosing.

METHODS

An on-line self-reported questionnaire containing 44 questions prepared after consultation with clinicians and patients was circulated to people with T1DM 116 responders provided completed responses. Fixed responses were allocated specific values (e.g. not confident = 0 fairly confident = 1). Multivariate regression analysis was carried out. Only those 5 factors with p-value <0.05 were retained.

RESULTS

59% of respondents were >50 years old and 66% had diabetes for >20 years, with 63% of patients reporting HbA1c results ≤8% or 64 mmol/mol. Findings included; 75% used only 1 m; 56% had used the same meter for ≥3 years; 10% had tried flash monitors; 47% were concerned about current BG level; 85% were concerned about long-term impact of higher BG. 72% of respondents keep BG level high to avoid hypoglycaemia; 25% used ≥7 mmol/L as pre-meal BG target to calculate dose; 65% were concerned they might be over/under-dosing; 83% did not discuss accuracy when choosing meter. However 85% were confident in their meter's performance. The factors that linked to LOWER HbA1c included LESS units of basal insulin (p < 0.001), HIGHER number of daily BG tests (p = 0.008), LOWER bedtime blood glucose (p = 0.009), HIGHER patient's concern over long-term impact of high BG (BG) (p < 0.009 but LOWER patient's concern over current BG values (p = 0.009). The final statistical model could explain 41% of the observed variation in HbA1c.

CONCLUSION

Many people still run their BG high to avoid hypoglycaemia. Concern about the longer-term consequences of suboptimal glycaemic control was associated with a lower HbA1c and is an area to explore in the future when considering how to help people with T1DM.

Efficacy and safety of expectant management in the treatment of tubal ectopic pregnancy: a systematic review and meta-analysis

STUDY QUESTION

Is expectant management (EM) of tubal ectopic pregnancy (EP) an effective and safe treatment strategy when compared to alternative interventions?

SUMMARY ANSWER

There is insufficient evidence to conclude EM yields a difference in the resolution of tubal EP, the avoidance of surgery or time to resolution of tubal EP when compared to intramuscular methotrexate in stable patients with β-hCG <1500 IU/l.

WHAT IS ALREADY KNOWN

The utilisation of medical and surgical management for EP is well established. EM aims to allow spontaneous resolution of the EP without intervention.

STUDY DESIGN SIZE AND DURATION

We performed a systematic review and meta-analysis, searching Ovid MEDLINE, Embase, PsycINFO, CINAHL, Web of Science, OpenGrey.eu, Google Scholar, cross-referencing citations and trial registries to 15 December 2019. There were no limitations placed on language or publication date. Search terms included tubal EP and EM as well as variations of these terms.

PARTICIPANTS/MATERIALS SETTING AND METHOD

We considered studies that included patients with tubal EP, EM as a comparator, and that were randomised controlled trials (RCTs). The primary outcome was resolution of tubal EP. Secondary outcomes included avoidance of surgery and the time to resolution of EP. Two reviewers independently selected the studies, assessed bias and extracted data. Relative risk (RR) and mean difference with 95% CI were assessed using a random effects model. The certainty of evidence was scored according to Grading of Recommendations Assessment, Development and Evaluation guidelines.

MAIN RESULTS AND THE ROLE OF CHANCE

In total, 920 studies were screened. Five studies were eligible for inclusion in the systematic review. Two RCTs comparing methotrexate to EM were identified as being eligible for inclusion in meta-analysis. No RCTs comparing surgery to EM were identified. Compared with EM, there was insufficient evidence that methotrexate yields a difference on resolution of tubal EP (RR 1.04, 95% CI 0.88-1.23, P = 0.67; two RCTs, moderate-certainty evidence), avoiding surgery (RR 1.10, 95% CI 0.94-1.29, P = 0.25; two RCTs, low-certainty evidence) or the time to resolution of tubal EP (-2.56 days (favouring EM), 95% CI -7.93-2.80, P = 0.35; two RCTs, low-certainty evidence).

LIMITATIONS REASONS FOR CAUTION

Only two RCTs with a total of 103 patients were eligible for inclusion in this meta-analysis. Further RCTs comparing EM to medical and surgical management are needed and these should also report adverse events. Patient preference should also be evaluated.

WIDER IMPLICATIONS OF THE FINDINGS

We found insufficient evidence of differences in terms of resolution, avoidance of surgery and time to resolution between expectant and medical management. Given the imprecision in the effect estimates as demonstrated by the wide CIs, resulting in the downgrading of certainty of evidence for all outcomes in this meta-analysis, larger RCTs comparing interventions for tubal EP are needed. Caution should be exercised when trying to decide between EM and methotrexate to treat tubal EP.

STUDY FUNDING/COMPETING INTERESTS

There was no funding for this study. NICM receives funding from various sources; none specifically supported this research. M.L. reports grants from Australian Women and Children's Research Foundation, outside the submitted work. M.A.: As a medical research institute, NICM Health Research Institute receives research grants and donations from foundations, universities, government agencies and industry. Sponsors and donors provide untied and tied funding for work to advance the vision and mission of the Institute. This systematic review was not specifically supported by donor or sponsor funding to NICM. M.A. reports a partnership grant with Metagenetics outside the submitted work. G.C. reports grants from Australian Women and Children's Research Foundation, personal fees from Roche and GE Healthcare, outside the submitted work. The remaining authors report no conflicts of interest.

PROSPERO REGISTRATION NUMBER

CRD42020142736.

Phosphatidylinositol 4-kinase IIIβ mediates contraction-induced GLUT4 translocation and shows its anti-diabetic action in cardiomyocytes

In the diabetic heart, long-chain fatty acid (LCFA) uptake is increased at the expense of glucose uptake. This metabolic shift ultimately leads to insulin resistance and a reduced cardiac function. Therefore, signaling kinases that mediate glucose uptake without simultaneously stimulating LCFA uptake could be considered attractive anti-diabetic targets. Phosphatidylinositol-4-kinase-IIIβ (PI4KIIIβ) is a lipid kinase downstream of protein kinase D1 (PKD1) that mediates Golgi-to-plasma membrane vesicular trafficking in HeLa-cells. In this study, we evaluated whether PI4KIIIβ is involved in myocellular GLUT4 translocation induced by contraction or oligomycin (an F₁F₀-ATP synthase inhibitor that activates contraction-like signaling). Pharmacological targeting, with compound MI14, or genetic silencing of PI4KIIIβ inhibited contraction/oligomycin-stimulated GLUT4 translocation and glucose uptake in cardiomyocytes but did not affect CD36 translocation nor LCFA uptake. Addition of the PI4KIIIβ enzymatic reaction product phosphatidylinositol-4-phosphate restored oligomycin-stimulated glucose uptake in the presence of MI14. PI4KIIIβ activation by PKD1 involves Ser294 phosphorylation and altered its localization with unchanged enzymatic activity. Adenoviral PI4KIIIβ overexpression stimulated glucose uptake, but did not activate hypertrophic signaling, indicating that unlike PKD1, PI4KIIIβ is selectively involved in GLUT4 translocation. Finally, PI4KIIIβ overexpression prevented insulin resistance and contractile dysfunction in lipid-overexposed cardiomyocytes. Together, our studies identify PI4KIIIβ as positive and selective regulator of GLUT4 translocation in response to contraction-like signaling, suggesting PI4KIIIβ as a promising target to rescue defective glucose uptake in diabetics.

Evaluation of distance facilitation and technology in an interprofessional simulation exercise

INTRODUCTION

This paper explores two objectives: (1) effectiveness of interprofessional education facilitators utilizing distance technology to facilitate and debrief an interprofessional exercise with students located on the islands Oahu and Hawai'i Island (Hilo), and (2) impact of technology on the simulation experience for facilitators and students.

METHODS

Four disciplines participated in an interprofessional hospital discharge exercise for the same geriatric patient case. Two questions administered to facilitators and students after each session focused on: (1) satisfaction with the students' ability to work through the simulation, and (2) satisfaction with the use of distance technology.

RESULTS

Results showed no significant differences when comparing students to facilitators for the students' ability to work through the simulation. Students gave significantly lower satisfaction scores with distance technology than faculty. There were no significant differences in scores among disciplines between either facilitators or students. Pharmacy distance students had significantly lower scores for satisfaction with the simulation exercise and for the role of distance technology compared to other students. Qualitative analyses showed trend improvements over five semesters in four technology areas; volume, noise, difficulty with clarity/understanding, and seating location/placement issues for the on-site group, but only significant improvement with clarity/understanding in the distance group.

CONCLUSIONS

Interprofessional simulation exercises can be successfully facilitated from both on-site and distance site without compromising students' ability to work through the exercise. Satisfaction with distance technology was lower for distance student groups.

Transport and concentration of wealth: Modeling an amenities-based-theory

We derive a reaction-advection-diffusion equation based framework for analyzing the movement of wealth in urban environments. Gentrification is a core issue that affects many urban areas, and the dynamics of such are not fully understood. To understand the process using a few physically relevant variables, we develop an approach to model the interplay between local amenities and wealth from existing analyses of factors influencing gentrification. We conduct a linear stability analysis on model parameters that results in spatially homogeneous solutions and determine directions for parameter changes to induce instabilities. From these parameters, we determine quantities that lead to the formation of areas of wealth and amenity concentration in the long term on bounded and unbounded domains. We present a global bifurcation result in two dimensions, leading to the existence and stability of non-constant equilibrium solutions, which represents solutions with wealth and amenity hotspots. Finally, we present a theory for discerning the one-dimensional pattern formation in the transition between stability and instability and verify numerically through a weakly nonlinear analysis. The analysis provides a promising framework for further verification using publicly available geospatial data on the relevant variables.

Sapphire advanced mitigation process: wet etch to expose sub-surface damage and increase laser damage resistance and mechanical strength

A novel, to the best of our knowledge, method of wet chemical etching of sapphire workpieces (such as optics, wafers, windows, and cones), called the sapphire advanced mitigation process (or sapphire AMP), has been developed that exposes sub-surface mechanical damage created during the optical fabrication process and significantly enhances the surface laser damage resistance ($ \gt {2{\times}}$>2×) and mechanical strength (up to $\sim{2.6{\times}}$∼2.6×). Sapphire AMP involves first treating the workpiece with a mixture of sulfuric and phosphoric acid $([{\rm H_{2}{\rm SO_{4}}}]:[{\rm H_{3}{\rm PO_{4}}}]=1:3)$([H₂SO₄]:[H₃PO₄]=1:3) at 220°C, followed with phosphoric acid at 160°C, then with sodium hydroxide base (NaOH) and surfactant at 40°C, and finally with a high-pressure deionized water spray rinse. Sapphire AMP has been demonstrated on both A- and C-plane sapphire workpieces. The mechanism of this etch process involves the reaction of the sapphire $({\rm Al_{2}}{\rm O_{3}})$(Al₂O₃) surface with sulfuric acid $({\rm H_{2}}{\rm SO_{4}})$(H₂SO₄) forming aluminum sulfate $[{{\rm Al}_2}{({{\rm SO}_4})_3}]$[Al₂(SO₄)₃], which has low solubility. The high phosphoric acid content in the first and second steps of sapphire AMP results in the efficient conversion of ${{\rm Al}_2}{({{\rm SO}_4})_3}$Al₂(SO₄)₃ to aluminum phosphate $({\rm AlPO_{4}})$(AlPO₄), which is very soluble, greatly reducing reaction product redeposition on the workpiece surface. Sapphire AMP is shown to expose sub-surface mechanical damage on the sapphire surface created during the grinding and polishing processes, whose etched morphology has either isotropic or anisotropic evolution depending on the nature of the initial surface damage. Sapphire AMP was also designed to remove the key known surface, laser absorbing precursors (namely, foreign chemical impurities, the fracture surface layer of preexisting sub-surface damage, and reaction product or foreign species redeposition or precipitation). Static and sliding indention induced surface microfractures on sapphire are shown after sapphire AMP to have a significant decrease in the fast photoluminescence intensity (a known metric for measuring the degree of laser damaging absorbing precursors). In addition, the onset of laser damage (at 351 nm 3 ns) on sapphire AMP treated workpieces was shown to increase in fluence from $\sim{4}$∼4 to $ \gt {9}.{5}\;{{\rm J/cm}^2}$>9.5J/cm². Finally, biaxial ball-on-ring mechanical tests on sapphire disks showed an increase in the failure stress from 340 MPa (with pre-existing 28 µm flaws) to $\sim{900}\;{\rm MPa}$∼900MPa after sapphire AMP, which is attributed to the blunting of the surface microfractures.

Liquid Chromatographic Method for the Determination of Nine Phenolic Antioxidants in Butter Oil: Collaborative Study

Ten laboratories collaboratively studied a liquid chromatographic (LC) method for the determination of propyl, octyl, and dodecyl gallate (PG, OG, and DG, respectively), 2,4,5-trihydroxybutyrophenone (THBP), ferf-butylhydroquinone (TBHQ), nordihydroguaiaretic acid (NDGA), 2- and 3-tert-butyl-4- hydroxyanisole (BHA), 2,6-di-ferf-butyl-4-hydroxymethylphenol (lonox-100), and 3,5-di-terf-butyl-4- hydroxytoluene (BHT) in butter oil. The 10 samples analyzed were spiked in matched pairs at about 100,50, and 10 μg/g. In the method studied, antioxidants are extracted as in AOAC LC method 983.15, but different LC eluants are used to separate the 9 antioxidants. Results from 1 laboratory were rejected as not valid and were not included in any calculations. For the remaining 9 laboratories, the overall mean recoveries for PG, THBP, TBHQ, NDGA, BHA, OG, lonox, BHT, and DG were 100.9, 97.8,103.4,95.4, 97.4,93.6,95.5,79.0, and 96.2%, respectively. The overall reproducibility relative standard deviations were 8.55,17.4,25.6,14.5,6.60, 9.64,10.8,11.4, and 7.35%, respectively. The method was adopted first action by AOAC International as a modification of AOAC method 983.15.

Determination of Low-Level Glucose and Fructose in Raw and Refined Crystalline Sugar by High-Performance Anion-Exchange Chromatography: Collaborative Study

A method was developed and a collaborative study was performed under the auspices of the International Commission of Uniform Methods for Sugar Analysis. The collaborators used high-performance anion-exchange chromatography (HPAEC) to determine trace amounts of glucose and fructose in 3 raw and 3 refined sugar samples provided as blind duplicates. Fourteen laboratories participated in the study. Although difficulties were experienced by a few analysts, 10 laboratories reported positive results. Average repeatabilities and reproducibilities for glucose and fructose in raw sugar were slightly above 5 and 10%, respectively, and the average Horwitz ratios were well under 2. Average repeatabilities and reproducibilities for glucose and fructose in refined sugar were 10 and 22%, respectively; although the Horwitz ratios were &gt;2, they were marginal (2.8). The HPAEC results agreed with results obtained by gas chromatography in an independent laboratory. Because the method was collaboratively studied according to the protocol of the International Union of Pure and Applied Chemistry for collaborative studies, and the results meet its criteria, it is recommended that the method be adopted Official First Action by AOAC INTERNATIONAL.

Connected diagnostics: linking digital rapid diagnostic tests and mobile health wallets to diagnose and treat brucellosis in Samburu, Kenya

BACKGROUND

Despite WHO guidelines for testing all suspected cases of malaria before initiating treatment, presumptive malaria treatment remains common practice among some clinicians and in certain low-resource settings the capacity for microscopic testing is limited. This can lead to misdiagnosis, resulting in increased morbidity due to lack of treatment for undetected conditions, increased healthcare costs, and potential for drug resistance. This is particularly an issue as multiple conditions share the similar etiologies to malaria, including brucellosis, a rare, under-detected zoonosis. Linking rapid diagnostic tests (RDTs) and digital test readers for the detection of febrile illnesses can mitigate this risk and improve case management of febrile illness.

METHODS

This technical advance study examines Connected Diagnostics, an approach that combines the use of point-of-care RDTs for malaria and brucellosis, digitally interpreted by a rapid diagnostic test reader (Deki Reader) and connected to mobile payment mechanisms to facilitate the diagnosis and treatment of febrile illness in nomadic populations in Samburu County, Kenya. Consenting febrile patients were tested with RDTs and patient diagnosis and risk information were uploaded to a cloud database via the Deki Reader. Patients with positive diagnoses were provided digital vouchers for transportation to the clinic and treatment via their health wallet on their mobile phones.

RESULTS

In total, 288 patients were tested during outreach visits, with 9% testing positive for brucellosis and 0.6% testing positive for malaria. All patients, regardless of diagnosis were provided with a mobile health wallet on their cellular phones to facilitate their transport to the clinic, and for patients testing positive for brucellosis or malaria, the wallet funded their treatment. The use of the Deki Reader in addition to quality diagnostics at point of care also facilitated geographic mapping of patient diagnoses in relation to key risk areas for brucellosis transmission.

CONCLUSIONS

This study demonstrates that the Connected Dx approach can be effective even when addressing a remote, nomadic population and a rare disease, indicating that this approach to diagnosing, treatment, and payment for healthcare costs is feasible and can be scaled to address more prevalent diseases and conditions in more populous contexts.

Engaging a Community Chaplaincy Resource for Interprofessional Health Care Provider Training in Facilitating Family Decision Making for Children at End-of-Life

Coordinating the care of terminally ill children is difficult for both parents and the health care team. An underutilized resource is spiritual care, such as that provided by Pacific Health Ministry, a community-based nonprofit established to develop hospital ministry training programs in Hawai'i and provide chaplaincy services to local facilities. This paper describes a training exercise, called the Pediatric Interprofessional Program (PIPP), which is modeled after an adult program, the Hawai'i Interprofessional Training for End of Life Communication in the intensive care unit (HITEC-ICU). Both programs were developed to introduce teams of learners consisting of Pacific Health Ministry spiritual care residents, internal medicine or pediatric residents, undergraduate students in nursing, and graduate students in social work to techniques in delivering serious, life-altering information, and the dynamics of working as an interprofessional team through use of progressively unfolding clinical simulations. PIPP facilitators included chaplaincy instructors at Pacific Health Ministry, university faculty, and community practitioners in pediatrics, nursing, and social work. The simulations were conducted at the Translational Health Science Simulation Center (THSSC) of the University of Hawai'i at Mānoa (UHM) School of Nursing and Dental Hygiene (SONDH), with simulated patients from the HealthCAST (Collaborative Acting Simulation Training) program, a collaborative agreement between SONDH and the UHM Department of Theatre and Dance. The training is ongoing, but has thus far demonstrated that interprofessional education programs are feasible across community, academic, and clinical lines, and benefit from the engagement of community resources.

Faecal Calprotectin and Magnetic Resonance Enterography in Ileal Crohn's Disease: Correlations Between Disease Activity and Long-Term Follow-Up

BACKGROUND AND AIMS

Magnetic resonance enterography [MRE] is the gold standard for assessing ileal inflammation in Crohn's disease [CD]. The aim of the present study was to correlate faecal calprotectin [FC] to MRE via a simple score in an exclusive ileal cohort with long-term follow-up for association with time to surgery or biologic therapy.

METHODS

In total, 150 MRE studies with matched FC [±30 days] were identified from the Edinburgh FC Register [2008-12; n = 18138]. Scans were re-read blinded to clinical data, independently, by two expert gastrointestinal radiologists, to generate a simple MRE score [range 0-10] from assessment of the worst intestinal segment plus total disease extent.

RESULTS

In total, 119 MRE scans were evaluated from 104 patients with ileal CD [L1 or L3 with panproctocolectomy]. Receiver operating characteristic analysis showed an area under the curve of 0.77 [0.67-0.87, p < 0.0001] for FC and MRE score >1, with an optimal cut-off of 145 μg/g for severe inflammation on MRE with 69.3% [57.6-79.5] sensitivity and 71.4% [53.7-85.4] specificity. Long-term follow-up over a median [interquartile range] of 2086 days [1786-2353] revealed FC ≥ 145 μg/g was associated with reduced biologic-free survival until 3 years following MRE, whereas MRE score [severe vs absent] was associated with reduced surgery- and biologic-free survival throughout follow-up. Backwards stepwise logistic regression revealed that length of ileal disease (odds ratio [OR] 3.8, 1.1-13.2, p = 0.034) and increased bowel wall thickness at MRE [OR 4.2, 1.6-10.7, p < 0.0001] or female sex [OR 5.2, 1.5-18.7, p = 0.011] increased the risk of biologic use or surgery, respectively.

CONCLUSIONS

FC correlates well with MRE assessment of ileal CD with MRE parameters associated with long-term biologic- and surgery-free remission.