Achievement of Target Gain Larger than Unity in an Inertial Fusion Experiment

On December 5, 2022, an indirect drive fusion implosion on the National Ignition Facility (NIF) achieved a target gain G_{target} of 1.5. This is the first laboratory demonstration of exceeding "scientific breakeven" (or G_{target}>1) where 2.05 MJ of 351 nm laser light produced 3.1 MJ of total fusion yield, a result which significantly exceeds the Lawson criterion for fusion ignition as reported in a previous NIF implosion [H. Abu-Shawareb et al. (Indirect Drive ICF Collaboration), Phys. Rev. Lett. 129, 075001 (2022)PRLTAO0031-900710.1103/PhysRevLett.129.075001]. This achievement is the culmination of more than five decades of research and gives proof that laboratory fusion, based on fundamental physics principles, is possible. This Letter reports on the target, laser, design, and experimental advancements that led to this result.

Flexible tape-drive target system for secondary high-intensity laser-driven sources

We present the development of a flexible tape-drive target system to generate and control secondary high-intensity laser-plasma sources. Its adjustable design permits the generation of relativistic MeV particles and x rays at high-intensity (i.e., ≥1 × 1018 W cm-2) laser facilities, at high repetition rates (>1 Hz). The compact and robust structure shows good mechanical stability and a high target placement accuracy (<4 μm RMS). Its compact and flexible design allows for mounting in both the horizontal and vertical planes, which makes it practical for use in cluttered laser-plasma experimental setups. The design permits ∼170° of access on the laser-driver side and 120° of diagnostic access at the rear. A range of adapted apertures have been designed and tested to be easily implemented to the targetry system. The design and performance testing of the tape-drive system in the context of two experiments performed at the COMET laser facility at the Lawrence Livermore National Laboratory and at the Advanced Lasers and Extreme Photonics (ALEPH) facility at Colorado State University are discussed. Experimental data showing that the designed prototype is also able to both generate and focus high-intensity laser-driven protons at high repetition rates are also presented.

A coded aperture with sub-mean free-path thickness for neutron implosion geometry imaging on inertial confinement fusion and inertial fusion energy experiments

Inertial confinement fusion and inertial fusion energy experiments diagnose the geometry of the fusion region through imaging of the neutrons released through fusion reactions. Pinhole arrays typically used for such imaging require thick substrates to obtain high contrast along with a small pinhole diameter to obtain high resolution capability, resulting in pinholes that have large aspect ratios. This leads to expensive pinhole arrays that have small solid angles and are difficult to align. Here, we propose a coded aperture with scatter and partial attenuation (CASPA) for fusion neutron imaging that relaxes the thick substrate requirement for good image contrast. These coded apertures are expected to scale to larger solid angles and are easier to align without sacrificing imaging resolution or throughput. We use Monte Carlo simulations (Geant4) to explore a coded aperture design to measure neutron implosion asymmetries on fusion experiments at the National Ignition Facility (NIF) and discuss the viability of this technique, matching the current nominal resolution of 10 µm. The results show that a 10 mm thick tungsten CASPA can image NIF implosions with neutron yields above 1014 with quality comparable to unprocessed data from a current NIF neutron imaging aperture. This CASPA substrate is 20 times thinner than the current aperture arrays for fusion neutron imaging and less than one mean free-path of 14.1 MeV neutrons through the substrate. Since the resolution, solid angle, and throughput are decoupled in coded aperture imaging, the resolution and solid angle achievable with future designs will be limited primarily by manufacturing capability.

A flexible proton beam imaging energy spectrometer (PROBIES) for high repetition rate or single-shot high energy density (HED) experiments (invited)

The PROBIES diagnostic is a new, highly flexible, imaging and energy spectrometer designed for laser-accelerated protons. The diagnostic can detect low-mode spatial variations in the proton beam profile while resolving multiple energies on a single detector or more. When a radiochromic film stack is employed for "single-shot mode," the energy resolution of the stack can be greatly increased while reducing the need for large numbers of films; for example, a recently deployed version allowed for 180 unique energy measurements spanning ∼3 to 75 MeV with <0.4 MeV resolution using just 20 films vs 180 for a comparable traditional film and filter stack. When utilized with a scintillator, the diagnostic can be run in high-rep-rate (>Hz rate) mode to recover nine proton energy bins. We also demonstrate a deep learning-based method to analyze data from synthetic PROBIES images with greater than 95% accuracy on sub-millisecond timescales and retrained with experimental data to analyze real-world images on sub-millisecond time-scales with comparable accuracy.

Measurement of Dark Ice-Ablator Mix in Inertial Confinement Fusion

We present measurements of ice-ablator mix at stagnation of inertially confined, cryogenically layered capsule implosions. An ice layer thickness scan with layers significantly thinner than used in ignition experiments enables us to investigate mix near the inner ablator interface. Our experiments reveal for the first time that the majority of atomically mixed ablator material is "dark" mix. It is seeded by the ice-ablator interface instability and located in the relatively cooler, denser region of the fuel assembly surrounding the fusion hot spot. The amount of dark mix is an important quantity as it is thought to affect both fusion fuel compression and burn propagation when it turns into hot mix as the burn wave propagates through the initially colder fuel region surrounding an igniting hot spot. We demonstrate a significant reduction in ice-ablator mix in the hot-spot boundary region when we increase the initial ice layer thickness.

Clinical Management of Melanocytic Tumours of Uncertain Malignant Potential (MelTUMPs), including Melanocytomas: A Systematic Review and Meta-Analysis

Little guidance is currently available for managing patients with melanocytic tumours of uncertain malignant potential (MelTUMPs, including melanocytomas), in particular the optimal excision margins and whether to offer sentinel node biopsy (SNB). The objective of this review is to evaluate excision margins and the prognostic utility of SNB by systematic review of the literature and meta-analysis. PRISMA guidelines were followed. Medline, EMBASE and Cochrane databases were searched to October 2021 for studies of patients with MelTUMPs reporting excision margins and/or SNB-positivity. Meta-analysis was performed on the SNB-positivity rate using a random effects model, followed by sensitivity analyses on subgroups. 111 primary studies reported excision margins and/or SNB data for 1962 patients. Follow-up was available for 1649 patients: 1561 (94.7%) were alive without disease at last review, 53 (3.2%) had developed further disease, 29 (1.8%) had died of metastatic disease (melanoma) and six (0.4%) died of unrelated causes. SNB was performed in 837 patients. The pooled positivity rate on meta-analysis was 32% (95% CI: 23-44%). Clinical outcome could be correlated with excision margin in only 171 patients (60% of those with known follow up) and was therefore not analysed further. Evidence indicating the ideal excision margins for MelTUMPs was lacking. SNB had a high positivity rate despite very low rates of recurrence or melanoma-related death. Consequently, SNB should not be offered routinely for MelTUMPs (including melanocytomas), due to its lack of prognostic utility for this tumour type (high certainty of evidence).

Characterization of a 1D-imaging high-energy x-ray backlighter driven by the National Ignition Facility Advanced Radiographic Capability laser

Plastic deformation of samples compressed to Mbar pressures at high strain rates at the National Ignition Facility (NIF) forms the basis of ongoing material strength experiments in conditions relevant to meteor impacts, geophysics, armor development, and inertial confinement fusion. Hard x-ray radiography is the primary means of measuring the evolution of these samples, typically employing a slit-collimated high-Z microdot driven by the NIF laser to generate >40 keV x rays [E. Gumbrell et al., Rev. Sci. Instrum. 89, 10G118 (2018) and C. M. Huntington et al., Rev. Sci. Instrum. 89, 10G121 (2018)]. Alternatively, a dysprosium "micro-flag" target driven by the Advanced Radiographic Capability laser (∼2 kJ, 10 ps) can deliver significantly higher spatiotemporal resolution [M. P. Hill et al., Rev. Sci. Instrum. 92, 033535 (2021)], especially in high-opacity samples. Initial experiments revealed problematic brightness and spectral gradients from this source, but by radiographing a set of diamond-turned, 105 µm-thick Pb test objects and supported by simulations using the 3D Monte Carlo code GEANT4, these geometry-dependent gradients across the field of view are quantified and mitigation strategies are assessed. In addition to significantly enhancing the modulation transfer function compared to the existing system, image stacking from multiple layers of image plate is shown to almost double the signal to noise ratio that will reduce uncertainties in future dynamic strength experiments.

Dual-energy fast neutron imaging using tunable short-pulse laser-driven sources

A novel dual-energy fast neutron imaging technique is presented using short-pulse laser-driven neutron sources to leverage their inherent adaptive spectral control to enable 3D volume segmentation and reconstruction. Laser-accelerated ion beams incident onto secondary targets create directional, broadband, MeV-class neutrons. Synthetic radiographs are produced of multi-material objects using ion and neutron spectra derived from analytic and numerical models. It is demonstrated that neutron images generated from small changes to the neutron spectra, controlled by altering the initial laser conditions, are sufficient to isolate materials with differing attenuation coefficients. This is first demonstrated using a simplistic combinatorial isolation method and then by employing more advanced reconstruction algorithms to reduce artifacts and generate a segmentation volume of the constituent materials.

Lawson Criterion for Ignition Exceeded in an Inertial Fusion Experiment

For more than half a century, researchers around the world have been engaged in attempts to achieve fusion ignition as a proof of principle of various fusion concepts. Following the Lawson criterion, an ignited plasma is one where the fusion heating power is high enough to overcome all the physical processes that cool the fusion plasma, creating a positive thermodynamic feedback loop with rapidly increasing temperature. In inertially confined fusion, ignition is a state where the fusion plasma can begin "burn propagation" into surrounding cold fuel, enabling the possibility of high energy gain. While "scientific breakeven" (i.e., unity target gain) has not yet been achieved (here target gain is 0.72, 1.37 MJ of fusion for 1.92 MJ of laser energy), this Letter reports the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce capsule gain (here 5.8) and reach ignition by nine different formulations of the Lawson criterion.

Pulse Energy and Pulse Duration Effects in the Ionization and Fragmentation of Iodomethane by Ultraintense Hard X Rays

The interaction of intense femtosecond x-ray pulses with molecules sensitively depends on the interplay between multiple photoabsorptions, Auger decay, charge rearrangement, and nuclear motion. Here, we report on a combined experimental and theoretical study of the ionization and fragmentation of iodomethane (CH_{3}I) by ultraintense (∼10^{19}  W/cm^{2}) x-ray pulses at 8.3 keV, demonstrating how these dynamics depend on the x-ray pulse energy and duration. We show that the timing of multiple ionization steps leading to a particular reaction product and, thus, the product's final kinetic energy, is determined by the pulse duration rather than the pulse energy or intensity. While the overall degree of ionization is mainly defined by the pulse energy, our measurement reveals that the yield of the fragments with the highest charge states is enhanced for short pulse durations, in contrast to earlier observations for atoms and small molecules in the soft x-ray domain. We attribute this effect to a decreased charge transfer efficiency at larger internuclear separations, which are reached during longer pulses.

Development of a deep learning based automated data analysis for step-filter x-ray spectrometers in support of high-repetition rate short-pulse laser-driven acceleration experiments

We present a deep learning based framework for real-time analysis of a differential filter based x-ray spectrometer that is common on short-pulse laser experiments. The analysis framework was trained with a large repository of synthetic data to retrieve key experimental metrics, such as slope temperature. With traditional analysis methods, these quantities would have to be extracted from data using a time-intensive and manual analysis. This framework was developed for a specific diagnostic, but may be applicable to a wide variety of diagnostics common to laser experiments and thus will be especially crucial to the development of high-repetition rate (HRR) diagnostics for HRR laser systems that are coming online.

Slow and Fast Light in Plasma Using Optical Wave Mixing

Slow and fast light, or large changes in the group velocity of light, have been observed in a range of optical media, but the fine optical control necessary to induce an observable effect has not been achieved in a plasma. Here, we describe how the ion-acoustic response in a fully ionized plasma can produce large and measurable changes in the group velocity of light. We show the first experimental demonstration of slow and fast light in a plasma, measuring group velocities between 0.12c and -0.34c.

Enhancements in laser-generated hot-electron production via focusing cone targets at short pulse and high contrast

We report on the increase in the accelerated electron number and energy using compound parabolic concentrator (CPC) targets from a short-pulse (∼150 fs), high-intensity (>10^{18} W/cm^{2}), and high-contrast (∼10^{8}) laser-solid interaction. We report on experimental measurements using CPC targets where the hot-electron temperature is enhanced up to ∼9 times when compared to planar targets. The temperature measured from the CPC target is 〈T_{e}〉=4.4±1.3 MeV. Using hydrodynamic and particle in cell simulations, we identify the primary source of this temperature enhancement is the intensity increase caused by the CPC geometry that focuses the laser, reducing the focal spot and therefore increasing the intensity of the laser-solid interaction, which is also consistent with analytic expectations for the geometrical focusing.

Microcoulomb (0.7 ± [Formula: see text] μC) laser plasma accelerator on OMEGA EP

Laser-plasma accelerators (LPAs) driven by picosecond-scale, kilojoule-class lasers can generate particle beams and x-ray sources that could be utilized in experiments driven by multi-kilojoule, high-energy-density science (HEDS) drivers such as the OMEGA laser at the Laboratory for Laser Energetics (LLE) or the National Ignition Facility at Lawrence Livermore National Laboratory. This paper reports on the development of the first LPA driven by a short-pulse, kilojoule-class laser (OMEGA EP) connected to a multi-kilojoule HEDS driver (OMEGA). In experiments, electron beams were produced with electron energies greater than 200 MeV, divergences as low as 32 mrad, charge greater than 700 nC, and conversion efficiencies from laser energy to electron energy up to 11%. The electron beam charge scales with both the normalized vector potential and plasma density. These electron beams show promise as a method to generate MeV-class radiography sources and improved-flux broadband x-ray sources at HEDS drivers.

Desmoplastic melanoma: a review of its pathology and clinical behaviour, and of management recommendations in published guidelines

Desmoplastic melanomas are uncommon. Their behaviour differs from that of other melanoma subtypes; therefore, management guidelines for non-desmoplastic melanomas may not be applicable. This review sought to examine all available evidence relating to the behaviour and management of desmoplastic melanomas, based on review of all relevant English-language publications, and to critically assess the recommendations for their management in current published melanoma management guidelines. Compared with other melanoma subtypes, patients with 'pure' desmoplastic melanomas (where ≥90% of the invasive melanoma is of desmoplastic melanoma subtype) have much lower rates of sentinel node positivity and distant metastasis. Local recurrence rates are higher for desmoplastic melanomas, but resection margins wider than those recommended for non-desmoplastic melanomas have not been shown to be of benefit. Adjuvant radiotherapy reduces the risk of local recurrence when a satisfactory histological clearance (≥8 mm) cannot be achieved. Of 29 published melanoma management guidelines identified, only 11 specified management for desmoplastic melanomas, while seven simply stated that the feature should be reported. Desmoplastic melanoma is a unique melanoma subtype with biology that differs from that of other melanoma subtypes. It requires specific management strategies but few current guidelines address these.

Order-of-magnitude increase in laser-target coupling at near-relativistic intensities using compound parabolic concentrators

Achieving a high conversion efficiency into relativistic electrons is central to short-pulse laser application and fundamentally relies on creating interaction regions with intensities ≫10^{18}W/cm^{2}. Small focal length optics are typically employed to achieve this goal; however, this solution is impractical for large kJ-class systems that are constrained by facility geometry, debris concerns, and component costs. We fielded target-mounted compound parabolic concentrators to overcome these limitations and achieved nearly an order-of-magnitude increase to the conversion efficiency and more than tripled electron temperature compared to flat targets. Particle-in-cell simulations demonstrate that plasma confinement within the cone and formation of turbulent laser fields that develop from cone wall reflections are responsible for the improved laser-to-target coupling. These passive target components can be used to improve the coupling efficiency for all high-intensity short-pulse laser applications, particularly at large facilities with long focal length optics.

High resolution >40 keV x-ray radiography using an edge-on micro-flag backlighter at NIF-ARC

Radiography of low-contrast features in high-density materials evolving on a nanosecond timescale requires a bright photon source in the tens of keV range with high temporal and spatial resolution. One application for sources in this category is the study of dynamic material strength in samples compressed to Mbar pressures at the National Ignition Facility, high-resolution measurements of plastic deformation under conditions relevant to meteor impacts, geophysics, armor development, and inertial confinement fusion. We present radiographic data and the modulation transfer function (MTF) analysis of a multi-component test object probed at ∼100 keV effective backlighter energy using a 5 μm-thin dysprosium foil driven by the NIF Advanced Radiographic Capability (ARC) short-pulse laser (∼2 kJ, 10 ps). The thin edge of the foil acts as a bright line-projection source of hard x rays, which images the test object at 13.2× magnification into a filtered and shielded image plate detector stack. The system demonstrates a superior contrast of shallow (5 μm amplitude) sinusoidal ripples on gold samples up to 90 μm thick as well as enhanced spatial and temporal resolution using only a small fraction of the laser energy compared to an existing long-pulse-driven backlighter used routinely at the NIF for dynamic strength experiments.

Production of relativistic electrons at subrelativistic laser intensities

Relativistic electron temperatures were measured from kilojoule, subrelativistic laser-plasma interactions. Experiments show an order of magnitude higher temperatures than expected from a ponderomotive scaling, where temperatures of up to 2.2 MeV were generated using an intensity of 1×10^{18}W/cm^{2}. Two-dimensional particle-in-cell simulations suggest that electrons gain superponderomotive energies by stochastic acceleration as they sample a large area of rapidly changing laser phase. We demonstrate that such high temperatures are possible from subrelativistic intensities by using lasers with long pulse durations and large spatial scales.

In cellulo crystallization of Trypanosoma brucei IMP dehydrogenase enables the identification of genuine co-factors

Sleeping sickness is a fatal disease caused by the protozoan parasite Trypanosoma brucei (Tb). Inosine-5’-monophosphate dehydrogenase (IMPDH) has been proposed as a potential drug target, since it maintains the balance between guanylate deoxynucleotide and ribonucleotide levels that is pivotal for the parasite. Here we report the structure of TbIMPDH at room temperature utilizing free-electron laser radiation on crystals grown in living insect cells. The 2.80 Å resolution structure reveals the presence of ATP and GMP at the canonical sites of the Bateman domains, the latter in a so far unknown coordination mode. Consistent with previously reported IMPDH complexes harboring guanosine nucleotides at the second canonical site, TbIMPDH forms a compact oligomer structure, supporting a nucleotide-controlled conformational switch that allosterically modulates the catalytic activity. The oligomeric TbIMPDH structure we present here reveals the potential of in cellulo crystallization to identify genuine allosteric co-factors from a natural reservoir of specific compounds.

Trypanosoma brucei inosine-5′-monophosphate dehydrogenase (IMPDH) is an enzyme in the guanine nucleotide biosynthesis pathway and of interest as a drug target. Here the authors present the 2.8 Å room temperature structure of TbIMPDH determined by utilizing X-ray free-electron laser radiation and crystals that were grown in insect cells and find that ATP and GMP are bound at the canonical sites of the Bateman domains.

Magnetized Disruption of Inertially Confined Plasma Flows

The creation and disruption of inertially collimated plasma flows are investigated through experiment, simulation, and analytical modeling. Supersonic plasma jets are generated by laser-irradiated plastic cones and characterized by optical interferometry measurements. Targets are magnetized with a tunable B field with strengths of up to 5 T directed along the axis of jet propagation. These experiments demonstrate a hitherto unobserved phenomenon in the laboratory, the magnetic disruption of inertially confined plasma jets. This occurs due to flux compression on axis during jet formation and can be described using a Lagrangian-cylinder model of plasma evolution implementing finite resistivity. The basic physical mechanisms driving the dynamics of these systems are described by this model and then compared with two-dimensional radiation-magnetohydrodynamic simulations. Experimental, computational, and analytical results discussed herein suggest that contemporary models underestimate the electrical conductivity necessary to drive the amount of flux compression needed to explain observations of jet disruption.

Experimental 3D coherent diffractive imaging from photon-sparse random projections

The routine atomic resolution structure determination of single particles is expected to have profound implications for probing structure-function relationships in systems ranging from energy-storage materials to biological molecules. Extremely bright ultrashort-pulse X-ray sources - X-ray free-electron lasers (XFELs) - provide X-rays that can be used to probe ensembles of nearly identical nanoscale particles. When combined with coherent diffractive imaging, these objects can be imaged; however, as the resolution of the images approaches the atomic scale, the measured data are increasingly difficult to obtain and, during an X-ray pulse, the number of photons incident on the 2D detector is much smaller than the number of pixels. This latter concern, the signal 'sparsity', materially impedes the application of the method. An experimental analog using a conventional X-ray source is demonstrated and yields signal levels comparable with those expected from single biomolecules illuminated by focused XFEL pulses. The analog experiment provides an invaluable cross check on the fidelity of the reconstructed data that is not available during XFEL experiments. Using these experimental data, it is established that a sparsity of order 1.3 × 10-3 photons per pixel per frame can be overcome, lending vital insight to the solution of the atomic resolution XFEL single-particle imaging problem by experimentally demonstrating 3D coherent diffractive imaging from photon-sparse random projections.

Calibration of proton dispersion for the NIF electron positron proton spectrometer (NEPPS) for short-pulse laser experiments on the NIF ARC

Experiments using the Advanced Radiographic Capability (ARC) laser at the National Ignition Facility (NIF) aim to characterize short-pulse-driven proton beams for use as both probes and drivers for high-energy-density physics experiments. Measurements of ARC-driven proton beam characteristics, such as energy spectrum and conversion efficiency, rely on the NIF Electron Positron Proton Spectrometer (NEPPS). The NEPPS diagnostic is a version of an existing particle spectrometer which is used for detecting MeV electron and positron spectra via permanent magnetic field dispersion. These spectrometers have not yet been calibrated for protons and instead use an analytical calculation to estimate the dispersion. Small variations in the field uniformity can affect the proton dispersion due to the relatively small resolving power (E/dE) for this diagnostic. A broadband energy, laser-accelerated proton source was produced at the Titan laser to experimentally calibrate the proton dispersion. These experimental data were used to test the theoretical dispersion. Numerical simulations using measurements of the magnetic field variation within the diagnostic were used to obtain a realistic proton dispersion curve for the new NEPPS units. This procedure for obtaining each independent dispersion is applicable to all EPPS and NEPPS diagnostics, given the axial magnetic field profile.

High-energy differential-filtering photon spectrometer for ultraintense laser-matter interactions

Large quantities of ultrahigh-energy x-rays are produced by petawatt-class lasers; however, spectroscopy in this range of 0.1-1 MeV is difficult due to the long photon mean free path. A novel geometry step filter to measure the high-energy bremsstrahlung emission tail has been developed for use in high energy density, short-pulse laser-matter interaction experiments. The grid design of the filters allows for the independent determination of a local background, which reduces systematic errors in the reconstructed spectra. This spectrometer was used to measure x-ray spectra for various laser and target conditions at intensities near 1 × 10¹⁸ W/cm² where single-exponential bremsstrahlung spectra were fit to the data and show an increasing photon temperature with pulse duration for a fixed laser intensity.

Ultrafast probing of magnetic field growth inside a laser-driven solenoid

We report on the detection of the time-dependent B-field amplitude and topology in a laser-driven solenoid. The B-field inferred from both proton deflectometry and Faraday rotation ramps up linearly in time reaching 210 ± 35 T at the end of a 0.75-ns laser drive with 1 TW at 351 nm. A lumped-element circuit model agrees well with the linear rise and suggests that the blow-off plasma screens the field between the plates leading to an increased plate capacitance that converts the laser-generated hot-electron current into a voltage source that drives current through the solenoid. ALE3D modeling shows that target disassembly and current diffusion may limit the B-field increase for longer laser drive. Scaling of these experimental results to a National Ignition Facility (NIF) hohlraum target size (∼0.2cm^{3}) indicates that it is possible to achieve several tens of Tesla.

Detailed characterization of the LLNL imaging proton spectrometer

Ultra-intense short pulse lasers incident on solid targets (e.g., thin Au foils) produce well collimated, broad-spectrum proton beams. These proton beams can be used to characterize magnetic fields, electric fields, and density gradients in high energy-density systems. The LLNL-Imaging Proton Spectrometer (L-IPS) was designed and built [H. Chen et al., Rev. Sci. Instrum. 81, 10D314 (2010)] for use with such laser produced proton beams. The L-IPS has an energy range of 50 keV-40 MeV with a resolving power (E/dE) of about 275 at 1 MeV and 21 at 20 MeV, as well as a single spatial imaging axis. In order to better characterize the dispersion and imaging capability of this diagnostic, a 3D finite element analysis solver is used to calculate the magnetic field of the L-IPS. Particle trajectories are then obtained via numerical integration to determine the dispersion relation of the L-IPS in both energy and angular space.

High-intensity laser-accelerated ion beam produced from cryogenic micro-jet target

We report on the successful operation of a newly developed cryogenic jet target at high intensity laser-irradiation. Using the frequency-doubled Titan short pulse laser system at Jupiter Laser Facility, Lawrence Livermore National Laboratory, we demonstrate the generation of a pure proton beam a with maximum energy of 2 MeV. Furthermore, we record a quasi-monoenergetic peak at 1.1 MeV in the proton spectrum emitted in the laser forward direction suggesting an alternative acceleration mechanism. Using a solid-density mixed hydrogen-deuterium target, we are also able to produce pure proton-deuteron ion beams. With its high purity, limited size, near-critical density, and high-repetition rate capability, this target is promising for future applications.

Abstract P2-01-07: Neutrophil lymphocyte ratio and breast cancer: A future prognostic indicator for outcome after surgery?

There is a growing body of literature highlighting the prognostic use of pre-operatively comparing certain white blood cell differentials, namely neutrophils and lymphocytes, with outcomes in many different types of solid tumour cancers. It has been postulated that a raised neutrophil to lymphocyte ratio (NLR) may reflect a greater tumour burden on the patient, and therefore lead to poorer outcomes. There is some evidence that a raised pre-operative NLR may help to predict poorer outcomes following surgery for breast cancer.

This observational retrospective proof of concept study aims to assess the association between pre-operative NLR and breast cancer outcomes over a three year period of follow-up from a cohort of 147 patients. The results of this study revealed that the cohort of patients with a raised pre-operative NLR was associated with a clinically significant increased rate of local recurrence of their breast cancer following surgery with curative intent (with or without adjuvant chemotherapy and radiotherapy) compared to those that had a low or normal NLR (20.4% ± 4.9% vs 5.1% ± 4.9% respectively, CI 95%; p=0.004). In relation to intra-operative sentinel lymph node biopsy, the analysis also showed that the incidence of a raised pre-operative NLR was not related to whether there was nodal involvement or not at the time of surgery (33% vs 33%, p=1). This suggests that a raised pre-operative NLR may be an independent prognostic indicator for breast cancer outcomes.

This study provides a template for a prospective observational study which is needed to corroborate this result and to account for confounding factors such as concomitant chronic disease. Additionally, a larger cohort sample size with a follow-up of five years is necessary to assess the relationship between pre-operative NLR and mortality due to the latter's relatively low incidence in breast cancer. However, this study further supports that consideration of the pre-operatively calculated NLR may provide an early prognostic indicator for breast cancer outcomes and warrants further investigation.

Citation Format: Williams GJ, Huws AM, Holt SDH, Sharaiha YM. Neutrophil lymphocyte ratio and breast cancer: A future prognostic indicator for outcome after surgery?. [abstract]. In: Proceedings of the Thirty-Eighth Annual CTRC-AACR San Antonio Breast Cancer Symposium: 2015 Dec 8-12; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2016;76(4 Suppl):Abstract nr P2-01-07.

The linac coherent light source single particle imaging road map

Intense femtosecond x-ray pulses from free-electron laser sources allow the imaging of individual particles in a single shot. Early experiments at the Linac Coherent Light Source (LCLS) have led to rapid progress in the field and, so far, coherent diffractive images have been recorded from biological specimens, aerosols, and quantum systems with a few-tens-of-nanometers resolution. In March 2014, LCLS held a workshop to discuss the scientific and technical challenges for reaching the ultimate goal of atomic resolution with single-shot coherent diffractive imaging. This paper summarizes the workshop findings and presents the roadmap toward reaching atomic resolution, 3D imaging at free-electron laser sources.

Scaling the yield of laser-driven electron-positron jets to laboratory astrophysical applications

We report new experimental results obtained on three different laser facilities that show directed laser-driven relativistic electron-positron jets with up to 30 times larger yields than previously obtained and a quadratic (∼E_{L}^{2}) dependence of the positron yield on the laser energy. This favorable scaling stems from a combination of higher energy electrons due to increased laser intensity and the recirculation of MeV electrons in the mm-thick target. Based on this scaling, first principles simulations predict the possibility of using such electron-positron jets, produced at upcoming high-energy laser facilities, to probe the physics of relativistic collisionless shocks in the laboratory.

Demonstration of simultaneous experiments using thin crystal multiplexing at the Linac Coherent Light Source

Multiplexing of the Linac Coherent Light Source beam was demonstrated for hard X-rays by spectral division using a near-perfect diamond thin-crystal monochromator operating in the Bragg geometry. The wavefront and coherence properties of both the reflected and transmitted beams were well preserved, thus allowing simultaneous measurements at two separate instruments. In this report, the structure determination of a prototypical protein was performed using serial femtosecond crystallography simultaneously with a femtosecond time-resolved XANES studies of photoexcited spin transition dynamics in an iron spin-crossover system. The results of both experiments using the multiplexed beams are similar to those obtained separately, using a dedicated beam, with no significant differences in quality.

Disease dynamics of Porites bleaching with tissue loss: prevalence, virulence, transmission, and environmental drivers

The prevalence, number of species affected, and geographical extent of coral diseases have been increasing worldwide. We present ecological data on the coral disease Porites bleaching with tissue loss (PBTL) from Kaneohe Bay, Oahu (Hawaii, USA), affecting P. compressa. This disease is prevalent throughout the year, although it shows spatio-temporal variability with peak prevalence during the warmer summer months. Temporal variability in disease prevalence showed a strong positive relationship with elevated water temperature. Spatially, PBTL prevalence peaked in clearer waters (lower turbidity) with higher water flow and higher densities of parrotfish, together explaining approximately 26% of the spatial variability in PBTL prevalence. However, the relatively poor performance of the spatial model suggests that other, unmeasured factors may be more important in driving spatial prevalence. PBTL was not transmissible through direct contact or the water column in controlled aquaria experiments, suggesting that this disease may not be caused by a pathogen, is not highly infectious, or perhaps requires a vector for transmission. In general, PBTL results in partial tissue mortality of affected colonies; on average, one-third of the tissue is lost. This disease can affect the same colonies repeatedly, suggesting a potential for progressive damage which could cause increased tissue loss over time. P. compressa is the main framework-building species in Kaneohe Bay; PBTL therefore has the potential to negatively impact the structure of the reefs at this location.

Reflective multilayer optic as hard X-ray diagnostic on laser-plasma experiment

A multilayer-based optic was tested for use as an X-ray diagnostic on a laser-plasma experiment. The multilayer optic was employed to selectively pass X-rays between 55 and 100 keV. An order of magnitude improvement in signal-to-noise ratio is achieved compared to a transmission crystal spectrometer. A multilayer response model, taking into account the source size and spectral content, is constructed and the outlook for application above 500 keV is briefly discussed. LLNL-JRNL-664311.

A high-resolution imaging x-ray crystal spectrometer for high energy density plasmas

Adapting a concept developed for magnetic confinement fusion experiments, an imaging crystal spectrometer has been designed and tested for HED plasmas. The instrument uses a spherically bent quartz [211] crystal with radius of curvature of 490.8 mm. The instrument was tested at the Titan laser at Lawrence Livermore National Laboratory by irradiating titanium slabs with laser intensities of 10(19)-10(20) W/cm(2). He-like and Li-like Ti lines were recorded, from which the spectrometer performance was evaluated. This spectrometer provides very high spectral resolving power (E/dE > 7000) while acquiring a one-dimensional image of the source.

Measurement of high-energy (10-60 keV) x-ray spectral line widths with eV accuracy

A high resolution crystal spectrometer utilizing a crystal in transmission geometry has been developed and experimentally optimized to measure the widths of emission lines in the 10-60 keV energy range with eV accuracy. The spectrometer achieves high spectral resolution by utilizing crystal planes with small lattice spacings (down to 2d = 0.099 nm), a large crystal bending radius and Rowland circle diameter (965 mm), and an image plate detector with high spatial resolution (60 μm in the case of the Fuji TR image plate). High resolution W L-shell and K-shell laboratory test spectra in the 10-60 keV range and Ho K-shell spectra near 47 keV recorded at the LLNL Titan laser facility are presented. The Ho K-shell spectra are the highest resolution hard x-ray spectra recorded from a solid target irradiated by a high-intensity laser.

The safety and efficacy of bariatric surgery for obese, wheelchair bound patients

INTRODUCTION

The aim of this study was to evaluate outcomes of bariatric surgery performed in order to improve mobility in patients with severe mobility limitations.

METHODS

Patients with severe mobility impairment (wheelchair bound) who underwent laparoscopic Roux-en-Y gastric bypass (LRYGB) or laparoscopic adjustable gastric banding (LAGB) surgery to improve their mobility were included in this study. Patients were identified between July 2009 and October 2011 using an electronic prospective bariatric database. Mobility was assessed by questionnaire during clinic follow-up appointments.

RESULTS

Fifteen patients (11 female, 4 male) with a mean age of 48 years (range: 26-71 years) and a mean body mass index of 46 kg/m(2) (range: 33-54 kg/m(2)) were included. Seven patients (47%) underwent LAGB and eight (53%) LRYGB. The aetiologies of mobility impairment included advanced osteoarthritis (n=6), spinal conditions (n=4), severe bilateral leg oedema and ulceration (n=2), advanced rheumatoid arthritis (n=2) and traumatic paraplegia (n=1). The mean length of hospital stay was 3.8 days. There was no mortality. One patient was lost to follow-up. Of the remaining 14 patients, the mean excess weight loss percentage at a mean of 18.5 months postoperatively was 48% (68% for LRYGB, 20 months; 29% for LAGB, 17 months). Ten patients reported improved mobility. Reduced pain, improved independence and ability to transfer were most commonly cited. Four patients reported no improvement in mobility (three LAGB patients, one LRYGB patient).

CONCLUSIONS

Bariatric surgery can safely improve mobility and quality of life in obese patients with severe mobility impairment. Our paper supports the idea that severe mobility impairment should be considered an indication for bariatric surgery in selected patients. LRYGB demonstrated better weight loss and mobility improvement than LAGB. Larger studies are required to establish robust selection criteria for surgery in this group.

Effect of trilostane on hormone and serum electrolyte concentrations in dogs with pituitary-dependent hyperadrenocorticism

Background

The effects of trilostane on key hormones and electrolytes over 24 hours in dogs with pituitary‐dependent hyperadrenocorticism (PDH) are unknown.

Objectives

To determine the plasma concentration of cortisol, endogenous adrenocorticotropic hormone (ACTH), aldosterone, sodium, potassium, and ionized calcium concentrations, and plasma renin activity over a 24‐hour period after administration of trilostane to dogs with well‐controlled PDH.

Animals

Nine dogs (mean age 9.3 ± 0.67 years, mean weight 31.9 ± 6.4 kg) with confirmed PDH.

Methods

Prospective study. Thirty days after the first administration of trilostane, blood samples were taken at −30, 0 (baseline), 15, 30, 60, and 90 minutes, and 2, 3, 4, 6, 8, 12, 16, 20, and 24 hours after administration of trilostane and plasma concentration of cortisol, endogenous ACTH, aldosterone, sodium, potassium, ionized calcium, and renin activity were determined.

Results

Cortisol concentrations decreased significantly (P < .001) 2–4 hours after trilostane administration. From baseline, there was a significant (P < .001) increase in endogenous ACTH concentrations between hours 3–12, a significant increase (P < .001) in aldosterone concentration between hours 16–20, and a significant (P < .001) increase in renin activity between hours 6–20. Potassium concentration decreased significantly (P < .05) between hours 0.5–2.

Conclusion and Clinical Importance

Treatment with trilostane did not cause clinically relevant alterations in plasma aldosterone and potassium concentration. Results suggest that in dogs with PDH, the optimal time point for an ACTH‐stimulation test to be performed is 2–4 hours after trilostane dosing. Future studies are necessary to establish interpretation criteria for a 2‐ to 4‐hour postpill ACTH‐stimulation test.

Using coherent X-ray ptychography to probe medium-range order

Characterization of microscopic structural order and in particular medium range order (MRO) in amorphous materials is challenging. A new technique is demonstrated that allows analysis of MRO using X-rays. Diffraction data were collected from a sample consisting of densely packed polystyrene-latex micro-spheres. Ptychography is used to reconstruct the sample transmission function and fluctuation microscopy applied to characterize structural order producing a detailed `fluctuation map' allowing analysis of the sample at two distinct length scales. Independent verification is provided via X-ray diffractometry. Simulations of dense random packing of spheres have also been used to explore the origin of the structural order measured.

Ultrafast three-dimensional imaging of lattice dynamics in individual gold nanocrystals

Key insights into the behavior of materials can be gained by observing their structure as they undergo lattice distortion. Laser pulses on the femtosecond time scale can be used to induce disorder in a "pump-probe" experiment with the ensuing transients being probed stroboscopically with femtosecond pulses of visible light, x-rays, or electrons. Here we report three-dimensional imaging of the generation and subsequent evolution of coherent acoustic phonons on the picosecond time scale within a single gold nanocrystal by means of an x-ray free-electron laser, providing insights into the physics of this phenomenon. Our results allow comparison and confirmation of predictive models based on continuum elasticity theory and molecular dynamics simulations.

An in-vacuum x-ray diffraction microscope for use in the 0.7-2.9 keV range

A dedicated in-vacuum coherent x-ray diffraction microscope was installed at the 2-ID-B beamline of the Advanced Photon Source for use with 0.7-2.9 keV x-rays. The instrument can accommodate three common implementations of diffractive imaging; plane wave illumination; defocused-probe (Fresnel diffractive imaging) and scanning (ptychography) using either a pinhole, focused or defocused probe. The microscope design includes active feedback to limit motion of the optics with respect to the sample. Upper bounds on the relative optics-to-sample displacement have been measured to be 5.8 nm(v) and 4.4 nm(h) rms/h using capacitance micrometry and 27 nm/h using x-ray point projection imaging. The stability of the measurement platform and in-vacuum operation allows for long exposure times, high signal-to-noise and large dynamic range two-dimensional intensity measurements to be acquired. Finally, we illustrate the microscope's stability with a recent experimental result.

Coherence properties of individual femtosecond pulses of an x-ray free-electron laser

Measurements of the spatial and temporal coherence of single, femtosecond x-ray pulses generated by the first hard x-ray free-electron laser, the Linac Coherent Light Source, are presented. Single-shot measurements were performed at 780 eV x-ray photon energy using apertures containing double pinholes in "diffract-and-destroy" mode. We determined a coherence length of 17  μm in the vertical direction, which is approximately the size of the focused Linac Coherent Light Source beam in the same direction. The analysis of the diffraction patterns produced by the pinholes with the largest separation yields an estimate of the temporal coherence time of 0.55 fs. We find that the total degree of transverse coherence is 56% and that the x-ray pulses are adequately described by two transverse coherent modes in each direction. This leads us to the conclusion that 78% of the total power is contained in the dominant mode.

Disease dynamics of Montipora white syndrome within Kaneohe Bay, Oahu, Hawaii: distribution, seasonality, virulence, and transmissibility

We report on an investigation of Montipora white syndrome (MWS), which is a coral disease reported from Hawaii, U.S.A., that results in tissue loss. Disease surveys of Montipora capitata within Kaneohe Bay (Oahu) found colonies that were affected by MWS on 9 reefs within 3 regions of Kaneohe Bay (south, central, north). Mean MWS prevalence ranged from 0.02 to 0.87% and average number of MWS cases per survey site ranged from 1 to 28 colonies. MWS prevalence and number of cases were significantly lower in the central region as compared to those in the north and south regions of Kaneohe Bay. There was a positive relationship between host abundance and MWS prevalence, and differences in host abundance between sites explained approximately 27% of the variation in MWS prevalence. Reefs in central Kaneohe Bay had lower M. capitata cover and lower MWS levels. MWS prevalence on reefs was neither significantly different between seasons (spring versus fall) nor among 57 tagged colonies that were monitored through time. MWS is a chronic and progressive disease causing M. capitata colonies to lose an average of 3.1% of live tissue mo(-1). Case fatality rate was 28% after 2 yr but recovery occurred in some colonies (32%). Manipulative experiments showed that the disease is acquired through direct contact. This is the first study to examine the dynamics of MWS within Hawaii, and our findings suggest that MWS has the potential to degrade Hawaii's reefs through time.

Fresnel coherent diffraction tomography

Tomographic coherent imaging requires the reconstruction of a series of two-dimensional projections of the object. We show that using the solution for the image of one projection as the starting point for the reconstruction of the next projection offers a reliable and rapid approach to the image reconstruction. The method is demonstrated on simulated and experimental data. This technique also simplifies reconstructions using data with curved incident wavefronts.

Use of a complex constraint in coherent diffractive imaging

We demonstrate use of a complex constraint based on the interaction of x-rays with matter for reconstructing images from coherent X-ray diffraction. We show the complementary information provided by the phase and magnitude of the reconstructed wavefield greatly improves the quality of the resulting estimate of the transmission function of an object without the need for a priori information about the object composition.

Diffractive imaging using partially coherent x rays

The measured spatial coherence characteristics of the illumination used in a diffractive imaging experiment are incorporated in an algorithm that reconstructs the complex transmission function of an object from experimental x-ray diffraction data using 1.4 keV x rays. Conventional coherent diffractive imaging, which assumes full spatial coherence, is a limiting case of our approach. Even in cases in which the deviation from full spatial coherence is small, we demonstrate a significant improvement in the quality of wave field reconstructions. Our formulation is applicable to x-ray and electron diffraction imaging techniques provided that the spatial coherence properties of the illumination are known or can be measured.