A dynamical measure of the black hole mass in a quasar 11 billion years ago

Tight relationships exist in the local Universe between the central stellar properties of galaxies and the mass of their supermassive black hole (SMBH)1-3. These suggest that galaxies and black holes co-evolve, with the main regulation mechanism being energetic feedback from accretion onto the black hole during its quasar phase4-6. A crucial question is how the relationship between black holes and galaxies evolves with time; a key epoch to examine this relationship is at the peaks of star formation and black hole growth 8-12 billion years ago (redshifts 1-3)7. Here we report a dynamical measurement of the mass of the black hole in a luminous quasar at a redshift of 2, with a look back in time of 11 billion years, by spatially resolving the broad-line region (BLR). We detect a 40-μas (0.31-pc) spatial offset between the red and blue photocentres of the Hα line that traces the velocity gradient of a rotating BLR. The flux and differential phase spectra are well reproduced by a thick, moderately inclined disk of gas clouds within the sphere of influence of a central black hole with a mass of 3.2 × 108 solar masses. Molecular gas data reveal a dynamical mass for the host galaxy of 6 × 1011 solar masses, which indicates an undermassive black hole accreting at a super-Eddington rate. This suggests a host galaxy that grew faster than the SMBH, indicating a delay between galaxy and black hole formation for some systems.

PP2ARts1 antagonizes Rck2-mediated hyperosmotic stress signaling in yeast

In Saccharomyces cerevisiae, impairment of protein phosphatase PP2ARts1 leads to temperature and hyperosmotic stress sensitivity, yet the underlying mechanism and the scope of action of the phosphatase in the stress response remain elusive. Using a quantitative mass spectrometry-based approach we have identified a set of putative substrate proteins that show both hyperosmotic stress- and PP2ARts1-dependent changes in their phosphorylation pattern. A comparative analysis with published MS-shotgun data revealed that the phosphorylation status of many of these sites is regulated by the MAPKAP kinase Rck2, suggesting that the phosphatase antagonizes Rck2 signaling. Detailed gel mobility shift assays and protein-protein interaction analysis strongly indicate that Rck2 activity is directly regulated by PP2ARts1 via a SLiM B56-family interaction motif, revealing how PP2ARts1 influences the response to hyperosmotic stress in Yeast.

The effect of albumin and γ-globulin on synovial fluid lubrication: Implication for knee joint replacements

Total knee arthroplasty has become a routine procedure for patients suffering from joint diseases. Although the number of operations continuously increases, a limited service-life of implants represents a persisting challenge for scientists. Understanding of lubrication may help to suitably explain tribological processes on the way to replacements that become durable well into the third decade of service. The aim of the present study is to assess the formation of protein lubricating film in the knee implant. A developed knee simulator was used to observe the contact of real femoral and transparent polymer tibial component using fluorescent microscopy. The contact was lubricated by various protein solutions with attention to the behaviour of albumin and γ-globulin. In order to suitably mimic a human synovial fluid, hyaluronic acid and phospholipids were subsequently added to the solutions. Further, the change in shape and the migration of the contact zone were studied. The results showed considerable appearance differences of the contact over the swing phase of the simplified gait cycle. Regarding film formation, a strong interaction of the various molecules of synovial fluid was observed. It was found that the thickness of the lubricating layer stabilizes within around 50 s. Throughout the contact zone, protein agglomerations were present and could be clearly visualised using the applied optical technique.

MFC-based biosensor for domestic wastewater COD assessment in constructed wetlands

In the context of natural-based wastewater treatment technologies (such as constructed wetlands - CW) the use of a low-cost, continuous-like biosensor tool for the assessment of operational conditions is of key importance for plant management optimization. The objective of the present study was to assess the potential use of constructed wetland microbial fuel cells (CW-MFC) as a domestic wastewater COD assessment tool. For the purpose of this work four lab-scale CW-MFCs were set up and fed with pre-settled domestic wastewater at different COD concentrations. Under laboratory conditions two different anodic materials were tested (graphite rods and gravel). Furthermore, a pilot-plant based experiment was also conducted to confirm the findings previously recorded for lab-scale experiments. Results showed that in spite of the low coulombic efficiencies recorded, either gravel or graphite-based anodes were suitable for the purposes of domestic wastewater COD assessment. Significant linear relationships could be stablished between inlet COD concentrations and CW-MFC E_cell whenever contact time was above 10 h. Results also showed that the accuracy of the CW-MFC was greatly compromised after several weeks of operation. Pilot experiments showed that CW-MFC presents a good bio-indication response between week 3 and 7 of operation (equivalent to an accumulated organic loading between 100 and 200 g COD/m², respectively). Main conclusion of this work is that of CW-MFC could be used as an "alarm-tool" for qualitative continuous influent water quality assessment rather than a precise COD assessment tool due to a loss of precision after several weeks of operation.

β-Catenin acts in a position-independent regeneration response in the simple eumetazoan Hydra

Wnt/β-Catenin signaling plays crucial roles in regenerative processes in eumetazoans. It also acts in regeneration and axial patterning in the simple freshwater polyp Hydra, whose morphallactic regenerative capacity is unparalleled in the animal kingdom. Previous studies have identified β-catenin as an early response gene activated within the first 30min in Hydra head regeneration. Here, we have studied the role of β-Catenin in more detail. First, we show that nuclear β-Catenin signaling is required for head and foot regeneration. Loss of nuclear β-Catenin function blocks head and foot regeneration. Transgenic Hydra tissue, in which β-Catenin is over-expressed, regenerates more heads and feet. In addition, we have identified a set of putative β-Catenin target genes by transcriptional profiling, and these genes exhibit distinct expression patterns in the hypostome, in the tentacles, or in an apical gradient in the body column. All of them are transcriptionally up-regulated in the tips of early head and foot regenerates. In foot regenerates, this is a transient response, and expression starts to disappear after 12-36h. ChIP experiments using an anti-HydraTcf antibody show Tcf binding at promoters of these targets. We propose that gene regulatory β-Catenin activity in the pre-patterning phase is generally required as an early regeneration response. When regenerates are blocked with iCRT14, initial local transcriptional activation of β-catenin and the target genes occurs, and all these genes remain upregulated at the site of both head and foot regeneration for the following 2-3 days. This indicates that the initial regulatory network is followed by position-specific programs that inactivate fractions of this network in order to proceed to differentiation of head or foot structures. brachyury1 (hybra1) has previously been described as early response gene in head and foot regeneration. The HyBra1 protein, however, appears in head regenerating tips not earlier than about twelve hours after decapitation, and HyBra1 translation does not occur in iCRT14-treated regenerates. Foot regenerates never show detectable levels of HyBra1 protein at all. These results suggest that translational control mechanisms may play a decisive role in the head- and foot-specific differentiation phase, and HyBra1 is an excellent candidate for such a key regulator of head specification.

[Wear and Roughness of Bearing Surface in Retrieved Polyethylene Bicon-Plus Cups]

PURPOSE OF THE STUDY By 7th December 2016, 4,755 Bicon-Plus cups in total were implanted in the Czech Republic. Some of them have been continuously re-operated, while the most frequent reason of failure is polyethylene wear and aseptic loosening. The present study is focused on surface analysis of retrieved polyethylene Bicon-Plus cups and the determination of the roughness of their bearing surfaces. MATERIAL AND METHODS In this study, we had 13 high molecular weight polyethylene cups with the average time in situ of 8.11 years (3.6-13.7, SD 3.2) before the retrieval. The study population was composed of 3 men, 10 women, with the mean age of 53.31 years. An optical scanning method, based on the principle of active triangulation, was used to determine wear rate. The rate of wear was identified by means of an obtained scan subsequently processed with the use of the GOM Inspect software. The roughness of surfaces was analysed with the application of Contour GT-X8 profiler using the principle of phase shifting interferometry. Measurements of surface topography of the retrieved cups were performed on the entire bearing surfaces. For the individual surface changes, a typical range of surface roughness, describing the particular wear character, was determined. By means of morphology analysis of the tested implants, three areas were identified: unworn area; area representing the worn part of the cup; and the area roughened by parallel grooving. The total surface roughness was evaluated as an arithmetic mean of the measured values. Subsequently, the values were sorted based on frequency and were classified into categories defining the particular wear mechanisms. RESULTS Wear rate of the retrieved acetabular cups was evaluated based on the wear direction vector and the size of linear wear. The average linear wear was equal to 0.13 mm/year (ranging from 0.26 to 2.29 mm/year), and the mean value of total volumetric material loss was 44.37 mm3/year (the range being from 51.80 to 1,119.7 mm3/year). Using the optical profilometer, a map of roughness distribution of the individual cups was obtained. For each implant, 76 values of roughness were evaluated. With the respect to average roughness, the samples were sorted to various categories describing: surface polishing; abrasiveadhesive wear; surfaces with preserved grooving; substantial plastic deformation. DISCUSSION The results clearly showed an increase of wear depending on implant survival; however, the tendency is not linear. This fact can be attributed to a larger amount of abrasive particles, causing an increase of wear or occurrence of surface wear in terms of micro cracks and oxidation degradation of polyethylene. This study indicates that geometry, positioning, and cup alignment during the implantation have a fundamental impact on the cup durability. Further correlation, which was observed in the case of the cup with prevailing roughness in the range from 0.1 to 0.3 μm, is a relatively wide wear vector angle determined with the use of the optical method. Considering the implants with the longest survival time with no loosening of the acetabular cup, the mean angle of direction vector was 56.8° (SD 2.1°). CONCLUSIONS The present study provides the results of morphology analysis of the retrieved Bicon-Plus cups. In general, relatively high wear rate, mainly of abrasive-adhesive character was identified. The dependence between wear and implant in situ longevity was not clearly linear, which suggests the influence of other parameters on the polyethylene wear rate. An important role of implant positioning on survival was also revealed. Moreover, it seems that it can be a more important parameter than the characteristics of the patient. Key words: total hip arthroplasty, Bicon-Plus cup, retrieval analysis, surface analysis, wear measurement, roughness, deformation, survivorship.

Aqueous solution/metal interfaces investigated in operando by photoelectron spectroscopy

We describe a new in operando approach for the investigation of heterogeneous processes at solid/liquid interfaces with elemental and chemical specificity which combines the preparation of thin liquid films using the meniscus method with standing wave ambient pressure X-ray photoelectron spectroscopy [Nemšák et al., Nat. Commun., 5, 5441 (2014)]. This technique provides information about the chemical composition across liquid/solid interfaces with sub-nanometer depth resolution and under realistic conditions of solution composition and concentration, pH, as well as electrical bias. In this article, we discuss the basics of the technique and present the first results of measurements on KOH/Ni interfaces.

[Determination of a Friction Coefficient for THA Bearing Couples]

PURPOSE OF THE STUDY

The wear of articular surfaces is considered one of the most important factors limiting the life of total hip arthroplasty (THA). It is assumed that the particles released from the surface of a softer material induce a complex inflammatory response, which will eventually result in osteolysis and aseptic loosening. Implant wear is related to a friction coefficient which depends on combination of the materials used, roughness of the articulating surfaces, internal clearance, and dimensions of the prosthesis.

MATERIAL AND METHODS

The selected parameters of the bearing couples tested were studied using an experimental device based on the principle of a pendulum. Bovine serum was used as a lubricant and the load corresponded to a human body mass of 75 kg. The friction coefficient was derived from a curve of slowdown of pendulum oscillations. Roughness was measured with a device working on the principle of interferometry. Clearance was assessed by measuring diameters of the acetabular and femoral heads with a 3D optical scanner. The specimens tested included unused metal-on-highly cross-linked polyethylene, ceramic-on-highly cross-linked polyethylene and ceramic-on-ceramic bearing couples with the diameters of 28 mm and 36 mm. For each measured parameter, an arithmetic mean was calculated from 10 measurements.

RESULTS

1) The roughness of polyethylene surfaces was higher by about one order of magnitude than the roughness of metal and ceramic components. The Protasul metal head had the least rough surface (0.003 μm). 2) The ceramic-on-ceramic couples had the lowest clearance. Bearing couples with polyethylene acetabular liners had markedly higher clearances ranging from 150 μm to 545 μm. A clearance increased with large femoral heads (up to 4-fold in one of the couple tested). 3) The friction coefficient was related to the combination of materials; it was lowest in ceramic-on-ceramic surfaces (0.11 to 0.12) and then in ceramic-on-polyethylene implants (0.13 to 0.14). The friction coefficient is supposed to increase with a decreasing femoral head diameter. However, in the bearing couples with polyethylene liners manufactured by one company, paradoxically, the friction coefficient slightly increased with an increase in femoral head size from 28 mm to 36 mm. 4) The lowest friction moment (< 3.5 Nm) was found for ceramic-on-ceramic implants 28 mm in diameter; the highest values were recorded in metal-on-polyethylene bearing couples 36 mm in diameter (> 7 Nm).

DISCUSSION

Although our study confirmed that the bearing couples produced by different manufacturers varied to some extent in the parameters studied, in our opinion, this variability was not significant because it was not within an order of magnitude in any of the tests.

CONCLUSIONS

The study showed that both the friction coefficient and the friction moment are affected more by the combination of materials than by the diameter of a femoral head. The best results were achieved in ceramic-on-ceramic implants.

[What should an orthopaedic surgeon know about biotribology of total hip arthroplasty]

The objective of this paper is to briefly review the engineering biotribology of total hip arthroplasty (THA). At present the issue of lubrication, wear and friction within a THA is being studied in detail and the results have been published in a number of papers. The reason is obvious since the rate at which the articulating surfaces wear off affects the longevity of a THA to a great extent. Seeking an optimal biotribological configuration remains an important task for both the researchers and orthopaedic surgeons. In order to enable the orthopaedic community to think over THA biotribology and, at the same time, communicate with the representatives of technical professions, knowledge of the basic principles of biotribology and their understanding is necessary.

Development of a mirror-based endoscope for divertor spectroscopy on JET with the new ITER-like wall (invited)

A new endoscope with optimised divertor view has been developed in order to survey and monitor the emission of specific impurities such as tungsten and the remaining carbon as well as beryllium in the tungsten divertor of JET after the implementation of the ITER-like wall in 2011. The endoscope is a prototype for testing an ITER relevant design concept based on reflective optics only. It may be subject to high neutron fluxes as expected in ITER. The operating wavelength range, from 390 nm to 2500 nm, allows the measurements of the emission of all expected impurities (W I, Be II, C I, C II, C III) with high optical transmittance (≥ 30% in the designed wavelength range) as well as high spatial resolution that is ≤ 2 mm at the object plane and ≤ 3 mm for the full depth of field (± 0.7 m). The new optical design includes options for in situ calibration of the endoscope transmittance during the experimental campaign, which allows the continuous tracing of possible transmittance degradation with time due to impurity deposition and erosion by fast neutral particles. In parallel to the new optical design, a new type of possibly ITER relevant shutter system based on pneumatic techniques has been developed and integrated into the endoscope head. The endoscope is equipped with four digital CCD cameras, each combined with two filter wheels for narrow band interference and neutral density filters. Additionally, two protection cameras in the λ > 0.95 μm range have been integrated in the optical design for the real time wall protection during the plasma operation of JET.

Geometry and spectral properties of the protonated homodimer of pyridine in the liquid and solid states. A combined NMR, X-ray diffraction and inelastic neutron scattering study

The structure and spectral signatures of the protonated homodimer of pyridine in its complex with a poorly coordinating anion have been studied in solution in CDF(3)/CDClF(2) down to 120 K and in a single crystal. In both phases, the hydrogen bond is asymmetric. In the solution, the proton is involved in a fast reversible transfer that determines the multiplicity of NMR signals and the sign of the primary H/D isotope effect of --0.95 ppm. The proton resonates at 21.73 ppm that is above any value reported in the past and is indicative of a very short hydrogen bond. By combining X-ray diffraction analysis with model computations, the position of the proton in the crystal has been defined as d(N-H) = 1.123 Å and d(H···N) = 1.532 Å. The same distances have been estimated using a (15)N NMR correlation. The frequency of the protonic out-of-plane bending mode is 822 cm(-1) in agreement with Novak's correlation.

WS5, a direct target of oncogenic transcription factor Myc, is related to human melanoma glycoprotein genes and has oncogenic potential

We have isolated a gene (WS5) that is specifically expressed at the mRNA and protein level in avian fibroblasts transformed by the v-myc oncogene of avian acute leukemia virus MC29. In a conditional cell transformation system, WS5 gene expression was tightly correlated with v-myc activation. The WS5 gene contains 11 exons, encoding a 733-amino acid protein with a transmembrane region and a polycystic kidney disease (PKD) domain. Near the transcriptional start site, the WS5 promoter contains a cluster of four binding sites for the Myc-Max complex and a binding site for transcription factor C/EBPalpha. Electrophoretic mobility shift assays and chromatin immunoprecipitation showed that Myc, Max and C/EBPalpha bind specifically to these sites. Functional promoter analyses revealed that both the Myc-binding site cluster and the C/EBPalpha-binding site are essential for strong transcriptional activation, and that Myc and C/EBPalpha synergistically activate the WS5 promoter. Ectopic expression of WS5 led to cell transformation documented by anchorage-independent growth. The human melanoma antigen Pmel17, a type I transmembrane glycoprotein, is the mammalian protein with the highest amino acid sequence identity (38%) to WS5. The Pmel17 gene is regulated by the MITF protein, a bHLHZip transcription factor with DNA binding specificities similar to those of Myc/Max. WS5 is also related to human glycoprotein GPNMB expressed in metastatic melanoma cells and implicated in the progression of brain and liver tumors.

Cooperative cell transformation by Myc/Mil(Raf) involves induction of AP-1 and activation of genes implicated in cell motility and metastasis

Avian fibroblasts transformed simultaneously by the v-myc and v-mil(raf) oncogenes of acute leukemia and carcinoma virus MH2 contain elevated levels of c-Fos and c-Jun, major components of the transcription factor complex AP-1. To define specific transcriptional targets in these cells, subtractive hybridization techniques were employed leading to the identification of strongly upregulated genes including OPN (osteopontin), 126MRP, and rac2. OPN is a cytokine and cell attachment protein which has been implicated in human tumor progression and metastasis, the calcium binding 126MRP protein is related to the human S100 protein family involved in invasive cell growth, and the Rac2 protein belongs to the Rho family of small GTPases regulating actin reorganization and cell migration. Promoter analysis indicated that OPN activation is mediated by a non-consensus AP-1 binding site located close to the transcription start site. Electrophoretic mobility shift assays, chromatin immunoprecipitation and transcriptional reporter gene analyses showed that c-Fos and c-Jun bind specifically to this site and that c-Fos efficiently transactivates the OPN promoter. High-level expression of OPN, 126MRP, or Rac2 proteins from a retroviral vector led to partial cell transformation, documented by morphological changes and anchorage-independent growth. The specific activation in v-myc/v-mil(raf)-transformed cells of target genes with intrinsic oncogenic potential may provide an explanation for the longstanding observation that concomitant expression of these oncogenes leads to strongly enhanced oncogenicity in vivo and in vitro compared to cell transformation by v-myc or v-mil(raf) alone.

Molecular targets of the oncogenic transcription factor jun

The Jun oncoprotein is a major component of the transcription factor complex AP-1, which regulates the expression of multiple genes essential for cell proliferation, differentiation and apoptosis. Constitutive activation of endogenous AP-1 is required for tumor formation in avian and mammalian cell transformation systems, and also occurs in distinct human tumor cells suggesting that AP-1 plays an important role in human oncogenesis. The highly oncogenic v-jun allele capable of inducing neoplastic transformation in avian fibroblasts and fibrosarcomas in chicken as a single oncogenic event, was generated by mutation of the cellular c-jun gene during retroviral transduction. Hence, avian cells represent an excellent model system to investigate molecular mechanisms underlying jun-induced cell transformation. Approaches aimed at the identification of genes specifically deregulated in jun-transformed fibroblasts have led to the identification of several genes targeted by oncogenic Jun. Some of the activated genes represent direct transcriptional targets of Jun encoding proteins, which are presumably involved in cell growth and differentiation. Genes suppressed in v-jun-transformed cells include several extracellular proteins like components of the extracellular matrix or proteins involved in extracellular signalling. Due to aberrant regulation of multiple genes by the Jun oncoprotein, it is assumed that only the combined differential expression of Jun target genes or of a subset thereof contributes to the conversion of a normal fibroblast into a tumor cell displaying a phenotype typical of jun-induced cell transformation. It has already been shown that distinct activated targets exhibit partial transforming activity upon over-expression in avian fibroblasts. Also, distinct target genes silenced by v-Jun inhibit tumor formation when re-expressed in v-jun-transformed cells. The protein products of these transformation-relevant genes may thus represent potential drug targets for interference with jun-induced tumorigenesis.

Receptor-mediated endocytosis of CD34 on hematopoietic cells after stimulation with the monoclonal antibody anti-HPCA-1

CD34 most probably acts as a receptor molecule on hematopoietic progenitor cells; however, its precise function remains to be elucidated. To track the intracellular pathway of CD34 after binding of a stimulatory antibody (anti-HPCA-1), immuno-electron microscopical analysis was performed on cells of normal bone marrow (NBMPC), acute leukemias, and the KG1a cell line. Before stimulation, CD34 was evenly distributed over the cell surface. After binding of the anti-HPCA-1, but not the anti-HPCA-2 antibody to CD34 and labeling with 30-nm immunogold, a rapid capping of CD34 and a subsequent internalization from the cell surface via clathrin-coated pits and coated vesicles was observed. The percentage of internalized CD34/immunogold complexes ranged from 8 to 80% in the NBMPC and the leukemic blasts, whereas KG1a cells showed an internalization rate of only 0.42%. Moreover, in the KG1a cells, the CD34/immunogold complexes were not associated with the coated pits. These differences in CD34 internalization did not correlate to the mRNA expression for the full-length or truncated CD34 assessed by isotype-specific real-time PCR. Taken together, evidence was found that CD34 is a surface receptor molecule that is modulated by receptor-mediated endocytosis. CD34 on KG1a cells appears to have a functional and/or structural defect, preventing modulation of this epitope.

Therapeutic success and efficacy of nonviral liposomal cDNA gene transfer to the skin in vivo is dose dependent

It is well documented that responses to growth factor treatment typically display bell-shaped dose responses that can significantly affect efficacy. Here we tested the hypothesis that nonviral liposomal gene delivery also displays this characteristic. We chose two different growth factors, keratinocyte growth factor (KGF) and insulin-like growth factor-I (IGF-I) CMV-driven transfecting constructs at three different concentrations and assessed efficacy on several physiological parameters that are descriptive of wound healing progress in a burn-wound healing model. Rats were given a 60% TBSA scald burn and randomly divided into one of seven groups to receive weekly subcutaneous injections of liposomes containing the cDNA for KGF (0.2 microg, 2.2 microg, or 22.2 microg), or liposomes containing the cDNA for IGF-I (0.2 microg, 2.2 microg, or 22.2 microg) at various concentrations, but constant liposome:DNA ratios and a LacZ gene (0.2 microg) CMV-driven construct for beta-galactosidase as vehicle and marker gene. Transfection was confirmed by histology for beta-galactosidase. Physiological efficacy was evaluated by measuring the wound healing parameters that define dermal and epidermal regeneration. Transfection products were found in the cytoplasm of rapidly dividing cells of the granulation tissue. Different doses of the nonviral cDNA gene transfer coding for KGF or IGF-I resulted in different outcomes for dermal and epidermal regeneration. There was a dose-dependent response to both growth factor gene transfers that was not dissimilar from that typically displayed by treatment with growth factor proteins. Both concentrations below and above the optimal concentration of DNA:liposomal preparations did not yield the results observed at the optimal concentration.

JAC, a direct target of oncogenic transcription factor Jun, is involved in cell transformation and tumorigenesis

Using subtractive hybridization techniques, we have isolated a gene termed JAC that is strongly and specifically activated in avian fibroblasts transformed by the v-jun oncogene of avian sarcoma virus 17 (ASV17), but not in cells transformed by other oncogenic agents. Furthermore, JAC is highly expressed in cell lines derived from jun-induced avian fibrosarcomas. Kinetic analysis using a doxycycline-controlled conditional cell transformation system showed that expression of the 0.8-kb JAC mRNA is induced rapidly upon activation of the oncogenic v-jun allele. Nucleotide sequence analysis and transcriptional mapping revealed that the JAC gene contains two exons, with the longest ORF confined to exon 2. The deduced 68-amino acid chicken JAC protein is rich in cysteine residues and displays 37% sequence identity to mammalian high-sulfur keratin-associated proteins. The promoter region of JAC contains a consensus (5'-TGACTCA-3') and a nonconsensus (5'-TGAGTAA-3') AP-1 binding site in tandem, which are both specifically bound by the Gag-Jun hybrid protein encoded by ASV17. Mutational analysis revealed that the two AP-1 sites confer strong transcriptional activation by Gag-Jun in a synergistic manner. Ectopic expression of JAC in avian fibroblasts leads to anchorage-independent growth, strongly suggesting that deregulation of JAC is an essential event in jun-induced cell transformation and tumorigenesis.

TOJ3, a target of the v-Jun transcription factor, encodes a protein with transforming activity related to human microspherule protein 1 (MCRS1)

Using the established quail cell line Q/d3 conditionally transformed by the v-jun oncogene, cDNA clones (TOJ2, TOJ3, TOJ5, TOJ6) were isolated by representational difference analysis (RDA) that correspond to genes which were induced immediately upon conditional activation of v-jun. One of these genes, TOJ3, is immediately and specifically activated after doxycycline-mediated v-jun induction, with kinetics similar to the induction of well characterized direct AP-1 target genes. TOJ3 is neither activated upon conditional activation of v-myc, nor in cells or cell lines non-conditionally transformed by oncogenes other than v-jun. Sequence analysis revealed that the TOJ3-specific cDNA encodes a 530-amino acid protein with significant sequence similarities to the murine or human microspherule protein 1 (MCRS1, MSP58), a nucleolar protein that directly interacts with the ICP22 regulatory protein from herpes simplex virus 1 or with p120, a proliferation-related protein expressed at high levels in most human malignant tumor cells. Similar to its mammalian counterparts, the TOJ3 protein contains a bipartite nuclear localization motif and a forkhead associated domain (FHA). Using polyclonal antibodies directed against a recombinant amino-terminal TOJ3 protein segment, the activation of TOJ3 in jun-transformed fibroblasts was also demonstrated at the protein level by specific detection of a polypeptide with an apparent M(r) of 65 000. Retroviral expression of the TOJ3 gene in quail or chicken embryo fibroblasts induces anchorage-independent growth, indicating that the immediate activation of TOJ3 in fibroblasts transformed by the v-jun oncogene contributes to cell transformation.

Combined Synthetic/CD Strategy for the Stereochemical Assignment of the Tricarballylic Acid Side Chains of Fumonisin B1

The circular dichroism (CD) exciton chirality method was employed for the stereochemical assignment of the tricarballylic acid (TCA) side chains of fumonisin B(1) 1a (FB(1)). Using 2-naphthoate for chromophoric derivatization of the reduced TCA moieties, the absolute configuration was shown to be R. For additional confirmation, an optically active dihydroxy-tert-butanoate 2 related to the TCA group of fumonisin B(1) was synthesized to serve as a model compound.

Determination of N-(carboxymethyl)fumonisin B(1) in corn products by liquid chromatography/electrospray ionization--mass spectrometry

It is well-known that fumonisin B(1) (FB(1)) in corn meal decreases during baking, frying, and cooking, but it is still not exactly clear how heating affects the formation of N-(carboxymethyl)fumonisin B(1) (NCM-FB(1)), the reaction product of FB(1) and reducing sugars. In model experiments corn grits were spiked with FB(1) (2 mg/kg) and D-glucose (50 g/kg) or sucrose (50 g/kg) and manufactured into extrusion products at various temperatures (160--180 degrees C) and moisture levels (16--20%). A liquid chromatography/electrospray ionization-mass spectrometry method using isotopically labeled fumonisin FB(1)-d(6) as an internal standard was developed for the determination of NCM-FB(1). For sample cleanup solid-phase C18 cartridges were used. The detection limit achieved with this method was 10 ng/g (signal-noise ratio = 3:1) using the protonated molecule [M + H](+) signal of NCM-FB(1) (m/z 780) in the selected ion monitoring mode. Low concentrations of NCM-FB(1) (29-97 ng/g) were detected in all samples spiked with D-glucose and FB(1), whereas those spiked with FB(1) and sucrose showed only NCM-FB(1) in samples produced at 180 degrees C (NCM-FB(1) = 27 ng/g). Various corn-containing food samples from the German market were analyzed for the presence of NCM-FB(1), FB(1), and hydrolyzed fumonisin B(1) (HFB(1)). All samples were contaminated with FB(1) (22--194 ng/g) and HFB(1) (5--247 ng/g). Six of nine samples contained NCM-FB(1) in low concentrations ranging from 10 to 76 ng/g. From these data and the low toxicity of NCM-FB(1) it can be concluded that the significance of NCM-FB(1) in food seems to be a minor one.

Toxicity assessment of fumonisins using the brine shrimp (Artemia salina) bioassay

The Fusarium mycotoxins fumonisin B(1) (FB(1)) (1) and B(2) (FB(2)) (2), their hydrolysed analogues HFB(1) (3) and HFB(2) (4) and the recently discovered fumonisin derivatives N-palmitoyl-HFB(1) (5) and N-carboxymethyl-FB(1) (6) were compared for their toxicity in a short term bioassay using brine shrimp (Artemia salina). The brine shrimp were hatched in artificial sea water and exposed to the fumonisins in microwell plates with a mortality endpoint after 48 hours. LC(50) values were calculated after Probit transformation of the resulting data. Of the substances tested, fumonisin B(1) emerged to be the most toxic whereas its N-carboxymethyl analogue was 100-fold less effective. The hydrolysed fumonisins showed a four- to sixfold reduced toxicity compared to FB(1). N-Palmitoyl-HFB(1) had a higher LC(50) value than its precursor HFB(1). The brine shrimp assay proved to be a convenient and rapid system for toxicity assessment of this group of mycotoxins.

Conditional cell transformation by doxycycline-controlled expression of the ASV17 v-jun allele

To investigate the molecular basis of oncogenesis induced by the v-jun oncogene of avian sarcoma virus 17 (ASV17), we developed a conditional cell transformation system in which transcription of the ASV17 v-jun allele is controlled by a doxycycline-sensitive transactivator (tTA) or a reverse (doxycycline-dependent) transactivator (rtTA), respectively. Permanent cell lines of quail embryo fibroblasts conditionally transformed by a doxycycline-controlled v-jun allele revert to the normal phenotype within 3 days and lose their ability to grow in soft agar, strictly dependent on the addition or removal of the drug, respectively. The reverted cells are rapidly retransformed on conditional activation of v-jun. While full-level synthesis of v-jun mRNA and v-Jun protein in these cells is established within 2 and 14 h, respectively, after switching to the permissive conditions, the first morphological alterations are observed after 24 h, and as early as 2 days later the morphology has changed entirely from flat cells resembling normal fibroblasts to spindle-shaped fusiform cells showing a typical jun-transformed phenotype. Kinetic expression analysis revealed that transcriptional activation of the direct jun target gene BKJ precisely coincides with the establishment of full-level v-Jun protein synthesis. Furthermore, we have analyzed the expression of a novel candidate v-jun target gene, termed JAC, which shows no sequence homology to known genes. Similar to BKJ, JAC is specifically activated in jun-transformed fibroblasts, and induction of JAC is tightly linked to the conditional expression of oncogenic v-Jun. These results demonstrate the high stringency of the doxycycline-controlled v-jun expression system, and they also indicate that expression of v-jun in these cells is indispensable for enhanced proliferation, cell transformation, and the induction of specific expression patterns of downstream target genes.

The brine shrimp (Artemia salina) bioassay: A simple method to assess the toxicity of fumonisin mycotoxins

Several fumonisin mycotoxins were compared for their toxicity using the brine shrimp (Artemia salina) bioassay. Of the substances tested, fumonisin FB1 emerged to be the most toxic whereas its N-carboxymethyl analogue 1 was 100-fold less effective. The hydrolysed fumonisins showed a four- to six-fold reduced toxicity compared to FB1. N-Palmitoyl-HFB1 2 had a higher LC50 value than its precursor HFB1. The brine shrimp assay proved to be a convenient and rapid system for toxicity assessment of this group of mycotoxins. The detailed results have been published recently (1).

Simultaneous determination of fumonisin B(1) and hydrolyzed fumonisin B(1) in corn products by liquid chromatography/electrospray ionization mass spectrometry

A method for the simultaneous determination of fumonisin B(1) (FB(1)) and its major hydrolysis product (HFB(1)), which is known to be formed during alkaline treatment of fumonisin-containing corn meal, was devised to analyze the levels of these mycotoxins in corn products available on the German market. Liquid chromatography/electrospray mass spectrometry in combination with selected ion monitoring (SIM) was used for unambiguous detection of FB(1) and HFB(1) after extraction of samples with acetonitrile/methanol/water (25:25:50) and solid-phase C18 cleanup. Quantitation was carried out using labeled fumonisin FB(1)-D(6) as an internal standard. The detection limits achieved with this method were 8 ng/g for HFB(1) (signal-noise ratio = 5:1) and 5 ng/g for FB(1) (s/n = 5:1) using the protonated molecule signals m/z 406 and 722 in the SIM mode. A screening of several corn-containing foodstuffs, among them extrusion products and alkali-processed corn food such as tortilla chips, showed HFB(1) and FB(1) contamination with levels of 8-80 and 5-450 ng/g, respectively.

3-Hydroxy-4,5-dimethyl-2(5H)-furanone (Sotolon) causing an off-flavor: elucidation of its formation pathways during storage of citrus soft drinks

Gas chromatography/olfactometry (GCO) and gas chromatography-mass spectrometry (HRGC-MS) revealed 3-hydroxy-4, 5-dimethyl-2(5H)-furanone (sotolon) to be responsible for the "burnt" and "spicy" off-flavor observed in citrus soft drinks during storage. Among the ingredients of citrus soft drinks, ethanol and ascorbic acid were identified as the essential precursors of sotolon. Two formation pathways were postulated by studies using (2)H (D)- and (13)C-labeled ethanol and ascorbic acid; i.e., sotolon is formed from two molecules of ethanol and carbons 2 and 3 of ascorbic acid (pathway 1), or it is generated from one molecule of ethanol and carbons 3-6 of ascorbic acid (pathway 2).

Conditional cell transformation by doxycycline-controlled expression of the MC29 v-myc allele

To investigate the molecular basis of oncogenesis induced by the v-myc oncogene of avian myelocytomatosis virus MC29, we developed a conditional cell transformation system in which expression of the MC29 v-myc allele is dependent on a doxycycline-sensitive transactivator (tTA). Clonal lines of quail embryo fibroblasts transformed by doxycycline-controlled v-myc revert to the normal phenotype and lose their ability to grow in soft agar after the addition of doxycycline. Repression of v-myc causes the cells to withdraw from the cell cycle, and long-term survival in culture requires reexpression of v-myc. Although complete repression of v-myc mRNA and v-Myc protein in these cells occurs within 14 h after the addition of doxycycline, the first morphological alterations are observed after 24 h, and after 3 days, the morphology changed entirely from small rounded cells showing a typical myc-transformed phenotype to large flat cells resembling normal fibroblasts. Cells exposed to doxycycline for 3 days reexpressed v-myc within 24 h after withdrawal of the drug from the culture medium, partial retransformation occurred after 2 days, and complete morphological transformation was reestablished after 6 days. Analogous results were obtained with a cell line in which expression of the v-myc allele is dependent on a reverse transactivator (rtTA) that is activated by doxycycline. The striking differential expression of known transformation-sensitive genes and of new candidate v-myc target genes revealed the tightness of the doxycycline-controlled v-myc expression system. The data also indicate that expression of v-myc in these cells is indispensable for enhanced proliferation, transformation, and immortalization.

Structure and transcriptional regulation of BKJ, a novel AP-1 target gene activated during jun- or fos-induced fibroblast transformation

The BKJ gene was originally identified based on its specific transcriptional activation in jun-transformed avian fibroblasts. We now show that BKJ is a direct transcriptional target of the AP-1 transcription factor components Jun and Fos. The complete structural organization of the quail BKJ gene was determined by nucleotide sequence analysis and transcriptional mapping. The gene contains three exons with the coding region confined to the third exon. A major mRNA species of 0.8 kb and a minor one of 1.3 kb are produced by variable usage of two transcriptional initiation sites. The BKJ promoter region contains two authentic AP-1 binding sites. By transactivation of reporter gene constructs and direct binding of Jun recombinant protein, the proximal AP-1 element was shown to be essential for BKJ promoter activation. Using polyclonal antiserum directed against recombinant BKJ protein, the activation of BKJ in jun-transformed avian fibroblasts was also demonstrated at the protein level. BKJ is a novel gene related to the avian beta-keratin gene family whose members display highly specific expression patterns during embryogenesis and epidermal development. Activation of BKJ in fibroblasts by retroviral or deregulated cellular jun or fos alleles may contribute to cell transformation.

Suppression in transformed avian fibroblasts of a gene (CO6) encoding a membrane protein related to mammalian potassium channel regulatory subunits

Gene expression patterns in normal and v-myc-transformed quail embryo fibroblasts were compared by mRNA differential display. Displaying approximately 2500 mRNA species by reverse transcription/PCR, reamplification of 73 differential cDNA fragments and rescreening by Northern analysis led to the isolation of a clone, termed CO6, that hybridized to an mRNA species present only in the normal but not in the transformed fibroblasts. Further analyses revealed that the 0.95-kb CO6 mRNA was present in all normal quail and chicken embryo fibroblasts tested, but that it was undetectable in a variety of established quail cell lines transformed by the v-myc, v-myc/v-mil, v-jun/junD or v-src oncogenes or by a chemical carcinogen. Furthermore, CO6 mRNA was not detectable in fibroblasts newly transformed by retroviral constructs carrying v-myc or v-jun alleles or by the avian sarcoma virus ASV17. In fibroblasts transformed by a temperature-sensitive v-src mutant, expression of CO6 was strongly induced at the non-permissive temperature and reduced at the permissive temperature. Nucleotide sequence analysis of quail CO6 cDNA indicated that the corresponding gene encodes a 200-amino acid protein with 46 to 48% amino acid sequence identity to the regulatory beta subunits (K(VCa)beta) of the bovine, human and canine high conductance Ca2+-activated K+ channels. No sequence homology to other ion channel subunits or to any other proteins in the databases was found. Like the K(VCa)beta subunits, the CO6 protein contains two putative transmembrane segments. Based on the relationship to mammalian K(VCa)beta both in primary structure and domain topology, the CO6 protein may represent the regulatory subunit of a yet unidentified avian Ca2+-activated potassium channel or a related membrane protein possibly involved in the regulation of cell proliferation.

Specific activation in jun-transformed avian fibroblasts of a gene (bkj) related to the avian beta-keratin gene family

We have analyzed differential gene expression in normal versus jun-transformed avian fibroblasts by using subtracted nucleic acid probes and differential nucleic acid hybridization techniques for the isolation of cDNA clones. One clone corresponded to a gene that was strongly expressed in a previously established quail (Coturnix japonica) embryo fibroblast line (VCD) transformed by a chimeric jun oncogene but whose expression was undetectable in normal quail embryo fibroblasts. Furthermore, the gene was expressed in quail or chicken fibroblast cultures that were freshly transformed by retroviral constructs carrying various viral or cellular jun alleles and in chicken fibroblasts transformed by the avian retrovirus ASV17 carrying the original viral v-jun allele. However, its expression was undetectable in a variety of established avian cell lines or freshly prepared avian fibroblast cultures transformed by other oncogenes or a chemical carcinogen. The nucleotide and deduced amino acid sequences of the cDNA clone were not identical to any sequence entries in the data bases but revealed significant similarities to avian beta-keratin genes; the highest degree of amino acid sequence identity was 63%. The gene, which we termed bkj, may represent a direct or indirect target for jun function.

A quail long-term cell culture transformed by a chimeric jun oncogene

A chimeric construct (VCD) consisting of parts from viral jun, chicken c-jun, and chicken junD was cloned into the replication-competent retroviral RCAS vector. This construct, RCAS-VCD, was found to have a higher focus forming potential in quail fibroblasts than the equivalent construct RCAS-VJ-1, expressing viral jun. DNAs from RCAS-VCD and RCAS-VJ-1 were transfected into primary quail embryo fibroblasts. Cells derived from one RCAS-VCD-induced focus survived cell crisis, which became manifest after 15 passages, and could be expanded into a long-term culture. This cell line, termed VCD, has been passaged for over 100 times so far. The cells grow to very high densities and then pile up into clumps of rounded cells. The culture releases a transforming virus with a titer of 10(5) FFU/ml, as tested on primary quail embryo fibroblasts. The transformed phenotype of VCD cells was verified by agar colony formation. VCD cells are capable of anchorage-independent growth with a cloning efficiency of 10%. Southern blot analysis of genomic DNA from VCD cells showed proviral integration of the RCAS construct without detectable rearrangements. Northern and Western blot analyses confirmed correct expression from integrated RCAS-VCD of predicted RNAs and of the chimeric Jun(VCD) protein. jun(VCD)-transformed cells provide a constant source of homogeneous cellular material for the investigation of the molecular mechanisms of jun-induced cell transformation and for the identification of direct and indirect targets of Jun protein function.

A new technical approach for the ultrastructural analysis of hematopoietic cells using cell monolayers adherent to electron-transparent melamine resins

The melamine resin is a polymer of a hexamethylol melamine ether which can coat glass slides with an electron-transparent foil (approximately 80 nm thick) after polymerization by p-toluene sulphonic acid and warming. Provided that the cells had been resuspended in a serum-free medium, normal peripheral blood, or bone marrow cells, blasts of different acute leukemias, cells of B-cell chronic lymphocytic leukemia, and of the cell-lines K562, KG1a, and HL-60 became adherent to the melamine-resin-covered glass slides. The optimal sedimentation time and cell concentration was 45 min and 10(7) cells/ml, respectively. Moreover, in serum-free culture medium the cells could be maintained adherent for up to 96 h without a great loss in cell number and viability. For transmission electron microscopical (TEM) analysis, the monolayers could be embedded in situ in epon after routine fixation and staining procedures. Alternatively, the foils could be removed from the glass and mounted on grids for whole mount electron microscopic analysis (WMEM). Both methods could be combined with immunogold labelling for the detection of surface antigens. This technique permits ultrastructural in situ analysis of morphological and/or immunological changes of cells induced by in vitro stimulation.

Sequence and expression of a glyceraldehyde-3-phosphate dehydrogenase-encoding gene from quail embryo fibroblasts

Using differential hybridization techniques, a cDNA library derived from a line of v-myc-transformed quail embryo fibroblasts was screened for clones whose expression was elevated in transformed, as compared with normal, cells. One of the isolated clones contained the entire coding region of the quail glyceraldehyde-3-phosphate dehydrogenase-encoding gene (GAPDH). A comparison of the deduced 333-amino-acid (aa) sequence of quail GAPDH with that of the only other avian (chicken) GAPDH sequence known, and with those of mammalian counterparts indicates the strong aa sequence conservation of this glycolytic enzyme. GAPDH is expressed in all transformed and non-transformed quail and chicken embryo fibroblasts and macrophages tested, with a moderate elevation of expression in most of the transformed cell lines. In the avian genomes, GAPDH is present in a single copy, in contrast to the high number of GAPDH-related sequences in mammalian species.

Oncogenic transformation by Jun: role of transactivation and homodimerization

Jun/JunD and Jun/GCN4 chimeras transform chicken embryo fibroblasts and activate the collagenase promoter in these same cells. Individual constructs differ widely in the two activities, and there is no correlation between transformation and transactivation. These results suggest that oncogenic transformation by Jun is not caused merely by an upregulation of AP-1 activity. Jun constructs with a modified dimerization domain allowing only homodimerization are active in transformation and transactivation in chicken embryo fibroblast cultures. Homodimers of Jun therefore transform and transactivate.

A rearranged junD transforms chicken embryo fibroblasts

A complementary DNA clone synthesized from the chicken junD mRNA, containing 5'- and 3'-untranslated sequences, was inserted in the retroviral expression vector RCAS to yield the construct JD. A second RCAS construct (DDDD) contained only the coding domains of JunD. DDDD did not transform upon primary transfection, but JD produced small numbers of transformed cell foci in chicken embryo fibroblast cultures. The virus recovered from these foci, JDV, was moderately transforming for chicken fibroblasts and weakly oncogenic in the animal. Its genome was rearranged, showing evidence for two recombination events. The first crossover was located between 5'-untranslated and coding sequences of junD and incorporated part of the 5'-untranslated region into an open reading frame. The second crossover occurred between junD and gag. The two crossovers generate a single open reading frame of 2064 nucleotides that encodes an 85 kilodalton protein in which sequences in the amino-terminal region of JunD are duplicated. This gag junD reading frame was recloned and then reconstituted into a replication-defective but transformation-competent retrovirus, indicating that the Gag-JunD fusion protein is the effector of transformation. A construct containing this rearranged coding sequence of JunD in Rc/RSV transactivated the collagenase promoter in chicken cells. Southern blot analysis of several independently isolated JunD transformants and deletion analysis of JDV indicated that duplication of a domain in the amino-terminal region of JunD is crucial for transformation and transactivation.

A novel bacterial virulence gene in Listeria monocytogenes required for host cell microfilament interaction with homology to the proline-rich region of vinculin

The ability of Listeria monocytogenes to move within the cytosol of infected cells and their ability to infect adjacent cells is important in the development of infection foci leading to systemic disease. Interaction with the host cell microfilament system, particularly actin, appears to be the basis for propelling the bacteria through the host cell cytoplasm to generate the membraneous protrusions whereby cell-to-cell spread occurs. The actA locus of L.monocytogenes encodes a 90 kDa polypeptide that is a key component of bacterium-host cell microfilament interactions. Cloning of the actA gene allowed the identification of its gene product and permitted construction of an isogenic mutant strain defective in the production of the ActA polypeptide. Sequencing of the region encoding the actA gene revealed that it was located region encoding the actA gene revealed that it was located between the metalloprotease (mpl) and phosphatidylcholine-specific phospholipase C (plcB) genes. Within the cytoplasm of the infected cells, the mutant strain grew as microcolonies, was unable to accumulate actin following escape from the phagocytic compartment and was incapable of infecting adjacent cells. It was also dramatically less virulent, demonstrating that the capacity to move intracellularly and spread intercellularly is a key determinant of L.monocytogenes virulence. Like all other virulence factors described for this microorganism, expression of the ActA polypeptide is controlled by the PrfA regulator protein. The primary sequence of this protein appeared to be unique with no extended homology to known protein sequences. However, an internal repeat sequence showed strong regional homology to a sequence from within the hinge region of the cytoskeletal protein vinculin.

Coordinate regulation of virulence genes in Listeria monocytogenes requires the product of the prfA gene

The prfA gene of Listeria monocytogenes encodes a protein that activates transcription of the listeriolysin gene (lisA). In order to explore the role of the prfA gene product in the pathogenesis of listerial infection, we constructed a site-directed insertion mutation in prfA by the chromosomal integration of a novel suicide vector containing a portion of the prfA coding region. This mutation not only transcriptionally silenced the listeriolysin (lisA) gene but also abrogated production of specific RNA transcripts corresponding to the phosphatidylinositol-specific phospholipase C (pic) and metalloprotease (mpl) genes, two further virulence gene products expressed only by pathogenic Listeria strains. The strain was also found to be avirulent when tested in a mouse model of listerial infection. The concomitant loss of multiple characteristics such as production of LisA, Pic, Mpl, and loss of virulence in a mouse infection model is the result of a mutation in a single gene and demonstrates that the prfA gene product is a positive regulator of multiple virulence determinants in L. monocytogenes.

The chicken junD gene and its product

We have isolated and characterized the chicken junD gene. It does not contain an intron; its upstream regulatory sequences lack the AP-1-binding site seen in c-jun but include two CRE elements. Downstream untranslated sequences do not show the destabilizing signal ATTTA. The amino acid sequence of the chicken JunD protein is closely related to that of mouse JunD in the dimerization and DNA contact surfaces of the carboxy-terminal region; additional homologies to mouse JunD are seen in acidic and amphipathic amino-terminal domains. Chicken JunD contains stretches of oligoglycines, alanines and prolines, possibly acting as hinges that connect functionally distinct domains of the protein. Chicken junD is broadly expressed at low basal levels in differentiated tissues and at somewhat higher levels in cultured fibroblasts. The cDNA clone of junD was transcribed and translated in vitro. The resulting JunD protein migrates in between 40 and 50 kDa in an SDS gel and can be precipitated with an antibody prepared against a polypeptide consisting of the carboxy-terminal 100 amino acids of mouse c-Jun.

cis-active elements from mouse chromosomal DNA suppress simian virus 40 DNA replication

Simian virus 40 (SV40)-containing DNA was rescued after the fusion of SV40-transformed VLM cells with permissive COS1 monkey cells and cloned, and prototype plasmid clones were characterized. A 2-kilobase mouse DNA fragment fused with the rescued SV40 DNA, and derived from mouse DNA flanking the single insert of SV40 DNA in VLM cells, was sequenced. Insertion of the intact rescued mouse sequence, or two nonoverlapping fragments of it, into wild-type SV40 plasmid DNA suppressed replication of the plasmid in TC7 monkey cells, although the plasmids expressed replication-competent T antigen. Rat cells were transformed with linearized wild-type SV40 plasmid DNA with or without fragments of the mouse DNA in cis. Although all of the rat cell lines expressed approximately equal amounts of T antigen and p53, transformants carrying SV40 DNA linked to either of the same two replication suppressor fragments produced significantly less free SV40 DNA after fusion with permissive cells than those transformed by SV40 DNA without a cellular insert or with a cellular insert lacking suppressor activity. The results suggest that two independent segments of cellular DNA act in cis to suppress SV40 replication in vivo, either as a plasmid or integrated in chromosomal DNA.

In vitro transformation by the SV40 'early region' of cells from a human benign salivary gland tumor with a 12q13----q15 rearrangement

Cells from a salivary gland pleomorphic adenoma with a reciprocal translocation, t(8;12)(q22;q14), were transformed by transfection with a plasmid containing the SV40 "early region." Compared with nontransformed adenoma cells, the cells expressed large-T antigen, had a higher proliferative capacity, showed a drastically increased or even unlimited growth potential in vitro, and formed colonies in soft agar. The amount of cellular material produced in this way should make possible many experiments at the molecular level that could not be performed before.