Synthesis, Characterization, and Antimicrobial Activity of Ultra-Short Cationic β-Peptides

The development of new antibiotics is urgently required because of the rapidly growing resistance against conventional antibiotics. The antimicrobial peptides show potential as small antibiotic molecules. The stability of peptides is a primary concern for the use of peptides as drugs. Introducing β-amino acids into peptide sequences can be useful in preventing biological degradation by proteolytic enzymes. Herein, we describe the synthesis, characterization, and antimicrobial activity of ultra-short cationic β-peptides, LA-β3,3-Pip-β2,2-Ac6c-PEA, P1; LA-β3,3-Pip(G)-β2,2-Ac6c-PEA, P2; LAU-β3,3-Pip-β2,2-Ac6c-PEA, P3, and LAU-β3,3-Pip(G)-β2,2-Ac6c-PEA, P4. Peptides P1-P4 were evaluated against Gram-negative, Gram-positive, MRSA, and multi-drug resistant E. coli (MDR-E. coli). P3 exhibited the most potent antimicrobial activity against E. coli, S. epidermidis, S. aureus, K. pneumoniae, S. mutans, and E. faecalis, with MIC values 0.5, 2, 0.5, 1, 2, and 1 μg/mL, respectively. P3 exhibited time- and concentration-dependent bactericidal activities against E. coli, S. aureus, and E. faecalis with a killing rate of 1.6 logs/h. The treatment of E. coli with peptide P3 showed membrane disruption. In addition, P3 exhibited the inhibition of biofilm produced by E. coli, synergism with antibiotics (ciprofloxacin, streptomycin, and ampicillin), 100% cell viability against AML12, RAW 264.7, and HEK-293 cell lines at 1, and 10 μg/mL concentrations.

Immediate flapless implant placement in a smoker patient: A challenge for optimum aesthetics and secondary stability: A case report

The objective of this case report was to restore the young patient with missing teeth and extruded tooth using an immediate implant and synthetic bone graft material for the esthetic and comfort purpose. A 21-year young man reported extrusion of a tooth as well as missing teeth. Clinical examination revealed missing teeth in relation to (irt) 11 and 21, extrusion of tooth in relation to (irt) 12, patient had generalized fluorosis, and localized marginal gingivitis with melanin pigmentation. The patient is a known smoker, and he was advised the cessation of smoking before the treatment. This paper describes a step-by-step approach to different treatment phases, starting with surgical guide fabrication, immediate implant surgical procedures, bone grafting procedure, and later prosthesis fabrication. Follow-up resulted in a satisfactory outcome.

Synthesis, conformation and cytotoxic activity of short hybrid peptides containing conformationally constrained 1-(aminomethyl)cyclohexanecarboxylic acid and gabapentin

The present work describes the synthesis,conformation and cytotoxic activities of short β/γ hybrid peptides, Boc-β^2,2-Ac₆c-Gpn-NHMe, BG1; Boc-(β^2,2-Ac₆c-Gpn)₂-OMe, BG2; Boc-(β^2,2-Ac₆c-Gpn)₃-OMe, BG3; H-β^2,2-Ac₆c-Gpn-NHMe, BG4; H-(β^2,2-Ac₆c-Gpn)₂-OMe, BG5; H-(β^2,2-Ac₆c-Gpn)₃-OMe, BG6, Boc-β^2,2-Ac₆c-Gpn-OMe, BG7 and H-β^2,2-Ac₆c-Gpn-OMe, BG8. Mixed C₆/C₇ conformations were observed for β/γ hybrid peptides. Further, BG1-BG8 were screened against MCF-7 (Breast cancer), A549 (Lung Cancer), PC-3 (Prostate cancer), HCT-116 (Colon cancer), and MDA-MB-231 (Breast cancer) cell lines. Among all, BG6 exhibited potent cytotoxicity against all cancer cell lines with IC₅₀ ranging from 1.6 μM to 6.3 μM with relatively low cytotoxicity against normal epithelial breast cell line fR-2 and human embryonic kidney cell line HEK-293. Minimal hemolytic activity was observed for BG6 against human erythrocytes. Peptide BG6 displayed anti-migratory and anti-invasive potentials showing strong interactions with intrinsic apoptotic markers Bcl-2, Bax, and cleaved-PARP, as well as the induction of the mitochondria maladjustment mediated apoptosis.

An association of VDR gene polymorphism in hypovitaminosis D mediated secondary hyperparathyroidism in adolescent girls; a tertiary hospital study in central India

Vitamin D is required to maintain normal serum calcium and phosphate levels that help normal bone mineralization, nerve conduction, muscle contraction, immune function, cell proliferation, and differentiation. Interventions including vitamin D supplementation may not improve vitamin D deficiency, as various complex genomic actions could contribute to vitamin D deficiency in the Indian population. Thus, we assessed hypovitaminosis D's relationship with vitamin D receptor (VDR) gene polymorphism and evaluated parathyroid hormone (PTH) levels in seemingly healthy adolescent school-going girls. We included 100 school-going girls (aged 12-17 years) studying in four schools of different socio-economic strata of Bhopal, India. The selected participants were divided into four groups based on the school in which they were studying. Blood samples were tested for serum calcium, phosphorus, PTH, ALP, vitamin D 25(OH) D, and albumin levels.VDR polymorphism was detected through the PCR-RFLP. Data were analyzed using the chi-square test, ANOVA, and linear regression. The difference in the age, calcium, ALP, and vitamin D values between the four groups were significant (P < 0.05), whereas high PTH levels (80%) were found. A higher prevalence of homozygous polymorphic allele demonstrates a molecular signature for severe secondary hyperparathyroidism. Hypovitaminosis D ranged from 84.9% to 100%, and a high prevalence of VDR polymorphism was observed. Attention must be paid to the health of this age group of school-going girls as hypovitaminosis D and associated VDR gene polymorphism could be the reason for secondary hyperparathyroidism (SHPT), showing changes in bone mineral density in these adolescent girls to ensure their future health.

Effect of adding silver nanoparticle on physical and mechanical properties of maxillofacial silicone elastomer material-an in-vitro study

PURPOSE

The purpose of this study was to evaluate the impact of silver nanoparticle incorporation into maxillofacial silicone material on its hardness, tear strength and color stability.

METHODS

A total of 180 silicone specimens were fabricated according to the specification of American society for material and testing (ASTM) No. D142 and No. D624. The control samples were fabricated without silver nanoparticles and test samples were fabricate with 20 ppm concentration of silver nanoparticles. For outdoor weathering specimens were placed in a metal cage, which was suspended from the roof for a period of one month. Digital shore A hardness tests (Yuzuki, DIN 53505, ASTM D2240) was used to measure hardness, for tear strength the specimen was placed in the jaws of the universal testing machine (Lloyd instruments, LR 50 K) and stretched at a rate of 500 ram/rain, for color stability Spectrophotometer had been employed and the data recorded in the CIE L*a*b* system. The independent sample's "t" test was used to test significant differences.

RESULTS

The mean difference for hardness between control and test group was 0.54 and t value was 2.08 and (p < 0.05).tear strength 0.66 and "t" value was 0.93 and (p < 0.05) and for color stability it was -0.02 and t value was -0.92 and (p < 0.05).

CONCLUSION

The present study findings suggest that addition of silver nanoparticles at 20 ppm concentration decreased the hardness of Teksil 25(S25) silicone elastomer, and it did not affect tear strength and color stability.

Altered gene expression in human cells induced by the agricultural chemical Enable

Steroid hormones bind to highly specific nuclear receptors, regulating gene expression that results in normal fetal growth and development and/or in normal adult physiological function. Many industrial and agricultural chemicals may bind one or more nuclear receptors, acting as mimics of steroid hormones, and are called endocrine disruptive chemicals (EDC) because they alter the expression of endocrine-regulated genes. A widely used fungicide, Enable (fenbuconazole), was evaluated to examine its capacity to alter endocrine-regulated gene expression. Cells of an oestrogen-dependent human breast cancer-derived line, MCF-7, were treated with a range, 0.033-3.3 ppb (ng/mL), of Enable, and gene expression was compared to that of untreated cells. Microarray analysis using a chip with 600 gene spots showed downregulation of eight genes and upregulation of 34 genes in cells treated with 3.3 ppb of Enable, compared to untreated cells. Specific genes were selected for consideration. Real-time PCR confirmed results obtained from analysis of the microarray data for the genes phenol sulphotransferase (PST), intercellular adhesion molecule-1 (ICAM-1), transforming growth factor b-3 (TGF b-3) and calreticulin. These studies were designed to provide base-line data on the gene expression-altering capacity of a specific chemical at a low dose, and will allow assessment of the possible deleterious effects that may be caused in human cells by exposure to the agricultural chemical Enable.

Comparison of fracture toughness of all-ceramic and metal-ceramic cement retained implant crowns: an in vitro study

To evaluate the fracture toughness of cement-retained implant-supported metal-ceramic molar crown with that of all-ceramic crowns, fabricated using IPS Empress 2 and yttria-stabilized zirconia copings. An dental implant and abutment was embedded in a clear polymethyl methacrylate model. A wax pattern reproducing the anatomy and dimension of a mandibular molar was made using inlay wax. Copings were made from the manufacturers guidelines for zirconia, metal ceramic and empress crown, in total of 21 copings, which were built for the crowns with metal layering ceramics specified by the manufacturers. The polymethylmethacrylate block-implant abutment complex was mounted on universal testing machine, and a static continuos vertical compressive load with a crosshead speed of 0.5 mm/min was applied. The breaking load and the peak load (in kilo Newtons) were recorded. The fractures for group I (zirconia-ceramic) and group II (metal-ceramic) occurred on the mesio-buccal aspect of the crowns involving the veneered ceramic layer while the catastrophic/bulk fracture was not observed. The mean value of breaking load for zirconia-ceramic, metal-ceramic and IPS-empress 2 was 3.4335, 3.071 and 1.0673 kN respectively. The mean value of peak load for zirconia-ceramic, metal-ceramic and IPS-empress 2 was 4.7365, 3.2757 and 1.566 kN respectively. It can be concluded that the zirconia-ceramic crown with the fracture toughness of 4.7365 ± 2.2676 kN has sufficient strength to allow clinical testing of these crowns as an alternative for metal-ceramic crowns (3.2757 ± 0.4681 kN).

Maxillary posterior bone height in relation to maxillary sinus floor in Indian dentulous population

To establish a ratio of variable bone height (Infrazygomatic alveolar crest height) to constant bone height (Infraorbital zygomatic height) and, to estimate the relative sinus floor position from alveolar crest of maxillary first molar region of dentulous Indian males and females, using Digital panoramic radiographs. Panoramic radiographs of 74 patients were included in the study (37 male, 37 female) to measure maxillary posterior vertical bone height and their ratio in dentulous patients. Measurements were made from reference lines drawn from anatomic landmarks on soft digital versions of standardized panoramic radiographs using Kodak dental imaging software. Later the data were analyzed using normal test (Z-score). When the posterior maxillary bone height and their ratio were evaluated in Indian population, the vertical bone height (x, y, z) of males was more than the females. Ratio of Infrazygomatic-alveolar crest distance (y)/Infraorbital-zygomatic distance (x)-was 0.74 for Indian males and females. The relative sinus floor for Indian males was found to be 8.1 mm and that of Indian females to be 7.8 mm. The results are of significant value as "baseline" data, in serial studies where alveolar bone height for a single patient is compared at different times before and after tooth loss. The relative sinus floor position from alveolar crest can help in implant length selection. This study can be used as a diagnostic and predictive tool in implant treatment planning but further long-term evaluation is still required to prove the efficacy of this study.

A survey on the use of techniques, materials in dental implantology practice

PURPOSE

To present results of a survey on the status of an implantology amongst implant-practicing dentist across the world in 2009.

MATERIALS AND METHODS

A questionnaire was sent to the members of EAO (European Association of Osseointegration), ICOI (International Congress of Osseointegrated Implants), ISOI (Indian Society of Oral Implantologists), Asian Academy of Osseointegration (AAO), Deutsche Gasellschaft Fur Orale Implantologie (DGOI), Philippines Implant Organization, Korean Society of Oral Implantologist, Japanese Association of OralIimplantologists, Chinese Dental Association, Pakistan Dental Association, asking for the personal (anonymous) background data and their implantology concepts. Specific questions dealt with level of recognition of implants, use of implants, superstructures, techniques followed, and materials used.

RESULTS

A total of 1500 (63.6%) of the 2358 questionnaires were answered. Dental implants were the most preferred treatment modality for restoring the missing teeth. Threaded implants were the most preferred. Cement retained implant prosthesis was the most preferred restoration procedure. Dentists believe that the general dentist should practice dental implant treatment modality, preferably teamwork. Immediate loading was the much-accepted concept among the dentists of the developed nations.

CONCLUSION

Dental implants were much accepted treatment modality for the replacement of missing teeth. Most the dentists follow the well documented technique and proven materials, which have been documented in the literature, an evidenced based practice, thus, delivering the best to their patients. Dentists from the developing nations agreed to have standardization in implants.

Dental implants in growing children

The replacement of teeth by implants is usually restricted to patients with completed craniofacial growth. The aim of this literature review is to discuss the use of dental implants in normal growing patients and in patients with ectodermal dysplasia and the influence of maxillary and mandibular skeletal and dental growth on the stability of those implants. It is recommended that while deciding the optimal individual time point of implant insertion, the status of skeletal growth, the degree of hypodontia, and extension of related psychological stress should be taken into account, in addition to the status of existing dentition and dental compliance of a pediatric patient.

Comparison of Stress Dissipation Pattern Underneath Complete Denture with Various Posterior Teeth form: An In Vitro Study

To evaluate the pattern of stress dissipation underneath the complete denture with various angled posterior teeth in both maxillary and mandibular arch. A 3D finite element models of residual ridge, mucosa, denture base in the coronal section were created from the dentures obtained from a patient, which were scanned and modeled. The coronal portion of the teeth was altered to stimulate the cuspal inclination of 0°, 20° and 33°, thus making the models. Special area of interest in bone, denture were selected to record the stresses. An vertical static load of 100N was applied through the mandibular model to the maxillary model. von Mises stresses developed in all the models were interpreted. Statistical analysis for comparison of stress values with different variables (0°-20°, 0°-33°, and 20°-33°) in various predefined areas of coronal section model was done using Student's t test (paired). Stress of greater magnitude were observed with cuspal teeth i.e. 33° and 20°, where as 0° showed slightly less magnitude of stresses.

A systematic review of impression technique for conventional complete denture

The importance of an in depth review of impression making for complete dentures lies in the assessment of the historical value of all the factors related to physical, biologic and behavioral areas and the time in which they were discussed and taught as well. This review documents the historical development of knowledge associated with scientific advancement from 1845 to the present year, i.e. 2009 related to impression procedures in conventional complete denture prosthesis. Search for articles was done through electronic media the Pubmed.

Isolation, characterization and chromosomal assignment of a partial cDNA for porcine 6-phosphogluconate dehydrogenase

A partial cDNA for 6-phosphogluconate dehydrogenase (PGD, EC 1.1.1.44) was isolated from a porcine liver cDNA library using a rat PGD cDNA. The identity of the PGD cDNA was confirmed by DNA sequencing and comparison of the amino acid sequence with the corresponding ovine sequence. The PGD cDNA was assigned to 6q2.5-2.7 by in situ hybridization.

Alteration of estrogen-regulated gene expression in human cells induced by the agricultural and horticultural herbicide glyphosate

Gene expression is altered in mammalian cells (MCF-7 cells), by exposure to a variety of chemicals that mimic steroid hormones or interact with endocrine receptors or their co-factors. Among those populations chronically exposed to these endocrine disruptive chemicals are persons, and their families, who are employed in agriculture or horticulture, or who use agricultural/horticultural chemicals. Among the chemicals most commonly used, both commercially and in the home, is the herbicide glyphosate. Although glyphosate is commonly considered to be relatively non-toxic, we utilized in vitro DNA microarray analysis of this chemical to evaluate its capacity to alter the expression of a variety of genes in human cells. We selected a group of genes, determined by DNA microarray analysis to be dysregulated, and used quantitative real-time PCR to corroborate their altered states of expression. We discussed the reported function of those genes, with emphasis on altered physiological states that are capable of initiating adverse health effects that might be anticipated if gene expression were significantly altered in either adults or embryos exposed in utero.

DEHP, bis(2)-ethylhexyl phthalate, alters gene expression in human cells: possible correlation with initiation of fetal developmental abnormalities

Diethylhexylphthalate (DEHP) is a widely distributed phthalate, to which humans are exposed to due to its variety of commercial and manufacturing uses. As a plasticiser, it is found in a wide number of products, and metabolites of DEHP have been detected in urine samples from a high percentage of the people screened for phthalates. We utilised DNA microarray analysis to evaluate DEHP for gene expression disrupting activity using the human cell line MCF-7, and found that DEHP significantly dysregulated approximately 34% of the 2400 genes spotted on the NEN2400 chip we used. The results suggest that DEHP, a known estrogen agonist and probable androgen antagonist, alters the expression of a number of genes, many of which are critical for fetal development. Down-regulation of two genes, FGD1 and PAFAH1B1, related in that both are essential for fetal brain development, was corroborated using quantitative real time PCR. These studies show DEHP to be a highly effective human gene expression-altering chemical, and that, at appropriate concentrations, it has the possibility of altering fetal central nervous system development, resulting in the birth defects lissencephaly and/or faciodigitogenital dysplasia.

Alteration of gene expression in human cells treated with the agricultural chemical diazinon: possible interaction in fetal development

Agricultural chemicals frequently alter human health or development, typically because they have endocrine agonist or antagonist activities and alter hormone-regulation of gene expression. The insecticide, diazinon, was evaluated for gene expression disrupting activity using MCF-7 cells, an estrogen-dependent human cell line, to examine the capacity of the insecticide to disrupt gene expression essential for morphological development, immune system development or function, and/or central nervous system development and function. MCF-7 cells were treated with 30, 50 or 67 ppm diazinon, and gene expression was measured in treated cells compared to expression in untreated or estrogen-treated cells. DNA microarray analysis of diazinon-treated cells showed significant up- or down-regulation of a large number of genes compared to untreated cells. Of the 600 human genes on the Phase 1 chip utilized for these studies, two specific genes--calreticulin and TGF-beta3--were selected for corroboration using quantitative real time PCR (qrtPCR). qrtPCR, completed to assess gene expression levels for calreticulin and TGFbeta3, confirmed results showing significant up-regulation of these two genes obtained from the microarray data. These studies were designed to provide baseline data on the gene expression-altering capacity of a specific chemical, diazinon, and allow a partial assessment of the potentially deleterious effects associated with exposure of human cells to this chemical. Currently, it is not known whether results from cells in vitro can be extrapolated to human health consequences of chemical exposure.

Altered gene expression in human cells treated with the insecticide diazinon: correlation with decreased DNA excision repair capacity

Many industrial and agricultural chemicals have steroid hormone agonist or antagonist activities and disrupt hormone-regulated gene expression. The widely-used agricultural insecticide, diazinon, was evaluated using MCF-7 cells - a breast cancer-derived, estrogen-dependent, human cell line - to examine the capacity of this chemical to alter steroid hormone-regulated gene expression. MCF-7 cells were treated with 30, 50, or 67 ppm of diazinon, and gene expression in treated cells was measured as mRNA levels in the cells compared to mRNA levels in untreated or estrogen-treated cells. DNA microarray analysis showed significant up- or down-regulation of a number of genes in treated cells compared to untreated cells. Of the 600 human genes on the chip utilized, specific genes with related functions were selected for additional consideration. Real time quantitative PCR (qrtPCR) completed to corroborate mRNA levels as a measure of specific gene expression, confirmed results obtained from analysis of the micro-array data. The data show that ERCC5, encoding Xeroderma pigmentosum protein G (XPG), essential for DNA excision repair, and ribonucleotide reductase subunit M1 (RNRM1), encoding a gene necessary for providing the nucleotides needed for DNA repair, were down-regulated in cells treated with diazinon. These studies were designed to provide base-line data on the gene expression-altering capacity of a specific agricultural chemical, diazinon, and allow assessment of some of the potentially deleterious effects associated with exposure of human cells to diazinon.

Does nasal breathing cause frictional trauma in allergic rhinitis?

OBJECTIVES

Frictional stress on the walls of a tube increases with increased air flow and as the diameter of the tube is reduced. High values of frictional stress may occur in the nose during nasal obstruction which could damage the nasal mucosa particularly when the mucosa is inflamed and fragile as in allergic rhinitis. The effect of nasal airflow induced frictional stress on the nasal mucosa was studied in patients with allergic rhinitis.

METHODS

We studied nasal peak flow rate in eight patients with allergic rhinitis and nasal obstruction comparing the change in peak expiratory flow after they breathed for 30 minutes through an obstructed and a patent nostril. Patients were studied in the right and left lateral decubitus positions to increase and decrease the resistance in the lower and upper nostril respectively and thus minimize any effects of cyclical changes in nasal resistance. Subjects breathed for 30 minutes through the upper patent nostril (schedule 1) and for a further 30 minutes through the lower obstructed nostril (schedule 2). Nasal peak expiratory flow rate was measured in both nostrils separately in both positions after each schedule.

RESULTS

There was a significant reduction in mean (SD) nasal peak flow rate (-12.8 (4.06) L/min) after subjects had breathed for 30 minutes through the obstructed nostril. There was no significant change in nasal peak flow rate after subjects had breathed through the patent nostril, or in the nostril that had no flow for 30 minutes.

CONCLUSIONS

These findings are compatible with the hypothesis that frictional stress due to airflow through an obstructed nostril induces trauma and swelling of the nasal mucosa of patients with allergic rhinitis.

The role of cough and hyperventilation in perpetuating airway inflammation in asthma

Air flowing through a pipe exerts frictional stress on the walls of the pipe. Frictional stress of more than 40 N/m2 (velocity equivalent of air 113 m/s) is known to cause acute endothelial damage in blood vessels. The frictional stress in airways during coughing may be much greater, however, since the velocity of air may be as high as speed of sound in air. We suggest that high levels of frictional stress perpetuate airway inflammation in airways which are already inflamed and vulnerable to frictional stress-induced trauma in patients with asthma. Activities associated with rapid ventilation and higher frictional stress (e.g. exercise, hyperventilation, coughing, sneezing and laughing) cause asthma to worsen whilst activities that reduce frictional stress (Yoga 'Pranayama', breathing a helium-oxygen mixture and nasal continuous positive airway pressure) are beneficial. Therefore control of cough may have anti-inflammatory benefits in patients with asthma.

Relationship of flow and cross-sectional area to frictional stress in airway models of asthma

Frictional stress from air flowing through narrowed airways may damage the airway mucosa and thereby increase airway inflammation and airway obstruction. To investigate the levels of frictional stress that might occur in the airway, we measured the frictional stress in three physical airway models (model 1: normal state; models 2 and 3: narrowed states with cross-sectional area half and one-fourth of model 1, respectively) at tracheal expiratory flow rates of 1, 2, 3, 4, 5, 6, 7, and 8 L/sec. Frictional stress measured at stations in the trachea (A), two each in the left (B and C) and right (D and E) major bronchi, and one in the right secondary bronchus (F) indicated that at higher flow rates, high values of the frictional stress seen in model 3 (highest value being 139.2 N/m2 at 8 L/sec at station) could well damage the airway wall, especially during episodes of cough, and particularly when the mucosa is inflamed and friable as it is in asthmatic patients. Conversely, control of cough may have anti-inflammatory benefits in asthmatic patients.