Proteomic analysis of stimulated saliva in gastroesophageal reflux disease patients with and without erosive tooth wear: Observational study

OBJECTIVE

To evaluate the difference in the proteomic profile of stimulated saliva in patients with gastroesophageal reflux disease (GERD) with (GE) and without (GNE) erosive tooth wear (ETW), regarding both human and bacterial proteins.

METHODS

Stimulated saliva (SS) was collected from 16 patients (8/group). Samples were centrifuged at 4.500 g for 15 min under refrigeration to remove all debris. The supernatant from each saliva sample was taken and frozen at -80 °C. After extracting the proteins, they were submitted to reverse phase liquid chromatography and mass spectrometry (nLC-ESI-MS/MS). Label-free proteomic quantification was performed using Protein Lynx Global Service (PLGS) software (p < 0.05) for human and bacterial proteins.

RESULTS

In total, 67 human proteins were common for GNE and GE groups. GNE group presented, compared to GE group, increase in proteins that confer antimicrobial and acid resistant properties, such as cystatins, histatin and immunoglobulins. However, GNE group had a marked decrease in subunits of hemoglobin (α, β and delta). Regarding bacterial proteins, for SS, 7 and 10 unique proteins were identified in the GE and GNE groups, respectively. They are related to protein synthesis and energy metabolism and interact with human proteins typically found in saliva and supramolecular complexes of the acquired pellicle.

CONCLUSIONS

Our data indicate that the stimulation of the salivary flow increases acid resistant and antimicrobial proteins in saliva, which might protect against ETW.

CLINICAL SIGNIFICANCE

This pioneer study showed important differences in the human and bacterial proteome of SS in patients with GERD with or without ETW.

Range verification in heavy-ion therapy using a hadron tumour marker

Objective.A new method to estimate the range of an ion beam in a patient during heavy-ion therapy was investigated, which was previously verified for application in proton therapy.Approach.The method consists of placing a hadron tumour marker (HTM) close to the tumour. As the treatment beam impinges on the HTM, the marker undergoes nuclear reactions. When the HTM material is carefully chosen, the activation results in the emission of several delayed, characteristicγrays, whose intensities are correlated with the remaining range inside the patient. When not just one but two reaction channels are investigated, the ratio between these twoγray emissions can be measured, and the ratio is independent of any beam delivery uncertainties.Main results.A proof-of-principle experiment with an16O ion beam and Ag foils as HTM was successfully executed. The107Ag(16O,x)112Sb and the107Ag(16O,x)114Sb reaction channels were identified as suitable for the HTM technique. When only oneγ-ray emission is measured, the resulting range-uncertainty estimation is at the 0.5 mm scale. When both channels are considered, a theoretical limit on the range uncertainty of a clinical fiducal marker was found to be ±290μm.Significance.Range uncertainty of a heavy-ion beam limits the prescribed treatment plan for cancer patients, especially the direction of the ion beam in relation to any organ at risk. An easy to implement range-verification technique which can be utilized during clinical treatment would allow treatment plans to take full advantage of the sharp fall-off of the Bragg peak without the risk of depositing excessive dose into healthy tissue.

Acquired enamel pellicle protects gastroesophageal reflux disease patients against erosive tooth wear

The objective of this study was to compare the protein profile of the acquired enamel pellicle (AEP) formed in vivo in patients with or without gastroesophageal reflux disease (GERD), and with or without erosive tooth wear (ETW). Twenty-four volunteers were divided into 3 groups: 1) GERD and ETW; 2) GERD without ETW; and 3) control (without GERD). The AEP formed 120 min after prophylaxis was collected from the lingual/palatal surfaces. The samples were subjected to mass spectrometry (nLC-ESI-MS/MS) and label-free quantification by Protein Lynx Global Service software. A total of 213 proteins were identified, or 119, 92 and 106 from each group, respectively. Group 2 showed a high number of phosphorylated and calcium-binding proteins. Twenty-three proteins were found in all the groups, including 14-3-3 protein zeta/delta and 1-phosphatidylinositol. Several intracellular proteins that join saliva after the exfoliation of oral mucosa cells might have the potential to bind hydroxyapatite, or participate in forming supramolecular aggregates that bind to precursor proteins in the AEP. Proteins might play a central role in protecting the dental surface against acid dissolution.

Rinsing solutions containing natural extracts and fluoride prevent enamel erosion in vitro

BACKGROUND

Polyphenols interact with salivary proteins and thus can improve the pellicle's erosion protective properties. This effect could be exploited to create rinsing solutions with polyphenols as active ingredients for erosion prevention. Different from the current gold standard for erosion protective rinsing solutions, these rinses would not rely on stannous ions. This would offer alternatives for patients with concerns regarding the composition of rinsing solutions and preferring bio-products.

OBJECTIVE

To develop an erosion-preventive rinsing solution containing natural polyphenol-rich extracts.

METHODOLOGY

Solutions were prepared with polyphenols from either grapeseed extract or cranberry extract, 500 ppm fluoride added, and additionally flavors and sweeteners. Controls were deionized water, 500 ppm fluoride solution, and the gold standard rinse in the field (Sn2+/F-). In total, 135 enamel specimens (n=15/group) were subjected to five cycles of salivary pellicle formation (30 min, 37°C), modification with the solutions (2 min, 25°C), further salivary pellicle formation (60 min, 37°C), and erosive challenge (1 min, 1% citric acid, pH 3.6). Relative surface microhardness (rSMH), surface reflection intensity (rSRI), and amount of calcium release (CaR) were investigated. Data were analyzed with Kruskal-Wallis and Wilcoxon rank sum tests (α=0.05).

RESULTS

The polyphenol solutions containing fluoride, as well as additional flavors, protected enamel better than fluoride alone, and similar to the Sn2+/F- solution, when investigating both rSMH and CaR. When measuring rSRI, Sn2+/F- showed the best protection, while the polyphenol solutions were similar to fluoride.

CONCLUSION

For two of the three assessed parameters (rSMH and CaR), both developed polyphenol-rich rinsing solutions were able to protect enamel from erosion, improving/potentializing the effect of fluoride and matching the protection offered by the current gold standard rinsing solution.

Protease-inhibitors added to saliva in vitro influence the erosion protective effect of enamel pellicles

In contrast to pellicles formed in vivo, pellicles formed in vitro provide little to no erosion protection for enamel, possibly due to protein degradation from proteases during pellicle formation. With the objective to achieve a more similar effect as observed for in vivo pellicles, the effects of adding protease inhibitors (PI) to saliva in vitro, and/or exchanging saliva repeatedly during pellicle formation were investigated in a cyclic model of pellicle formation and erosion with human enamel specimens. We repeatedly assessed surface microhardness (SMH), measured initial and final surface reflection intensity (SRI), and determined calcium released during erosion. For all the parameters tested, we observed a clear positive effect on erosion protection when adding PI to saliva for pellicle formation: SMH remained harder, SRI remained higher, and less calcium was released. Additionally, exchanging saliva with fresh one during pellicle formation led to a protective effect, but not as strong as the addition of PI. We conclude that adding protease inhibitors to saliva in vitro for pellicle formation leads to an erosion protective effect, which was further increased by repeatedly exchanging the saliva. Whether the pellicle itself more closely resembles in vivo pellicles remains to be investigated.

Plant extracts have dual mechanism on the protection against dentine erosion: action on the dentine substrate and modification of the salivary pellicle

To investigate the effect of some polyphenol-rich plant extracts on the protection of dentine against demineralization, both acting on the dentine and on the salivary pellicle. Dentine specimens (n = 180) were randomly distributed into 6 experimental groups (n = 30/group): Control (deionized water), Açaí extract, Blueberry extract, Green tea extract, Grape seed extract, and Sn²⁺/F^- (mouthrinse containing stannous and fluoride). Each group was further divided into two subgroups (n = 15), according to the site of action of the substance: on the dentine surface (D) or on the salivary pellicle (P). The specimens were submitted to 10 cycles: 30 min incubation in human saliva (P) or only in humid chamber (D), 2 min immersion in experimental substances, 60 min of incubation in saliva (P) or not (D), and 1 min erosive challenge. Dentine surface loss (DSL), amount of degraded collagen (dColl) and total calcium release were analyzed. Green tea, Grape seed and Sn²⁺/F^- showed significant protection, with least DSL and dColl. The Sn²⁺/F^- showed better protection on D than on P, whereas Green tea and Grape seed showed a dual mode of action, with good results on D, and even better on P. Sn²⁺/F^- showed the lowest values of calcium release, not differing only from Grape seed. Sn²⁺/F^- is more effective when acting directly on the dentine surface, while Green tea and Grape seed have a dual mode of action: with a positive effect on the dentine surface itself, but an improved efficacy in the presence of the salivary pellicle. We further elucidate the mechanism of action of different active ingredients on dentine erosion, where Sn²⁺/F^- acts better on the dentine surface, but plant extracts have a dual mode of action, acting on the dentine itself as well as on the salivary pellicle, improving the protection against acid demineralization.

[Examinations of cattle births with a special focus on Coxiella burnetii]

INTRODUCTION

Cattle births can carry the risk of transmissible and zoonotic diseases. The focus of the present study was the excretion of Coxiella (C.) burnetii during cattle births. Small ruminants are considered as the main reservoir of C. burnetii. Cattle are often subclinical carriers and their role as potential reservoir has not been fully elucidated until now, although the excretion of Coxiella has been demonstrated during cattle birth. The study recorded all births, caesarean sections and one abortion in 40 cattle at the ruminant clinic of the Vetsuisse Faculty in Bern in the study period from March 2019 to March 2020. A placenta -, milk - and fecal sample was examined for antigen diagnostics using polymerase chain reaction (PCR). In addition, a serum sample was analyzed to detect C. burnetii-specific antibodies. Antigen and/or antibodies (placenta, n=8/9; milk, n=2/9; faeces, n=1/9; serology n= 3/9) were detected in 22,5 % of the cows (n=9/40) without the presence of specific clinical symptoms. It is essential to sensitize contact persons to this zoonosis, since Coxiella can trigger Q-fever in humans.

Dual protective effect of the association of plant extracts and fluoride against dentine erosion: In the presence and absence of salivary pellicle

OBJECTIVES

To verify the protective effect of plant extracts associated with fluoride against dental erosion of dentine, in the presence and absence of a salivary pellicle.

METHODS

Dentine specimens (n = 270) were randomly distributed into 9 experimental groups (n = 30/group): GT (green tea extract); BE (blueberry extract); GSE (grape seed extract); NaF (sodium fluoride); GT+NaF (green tea extract and NaF); BE+NaF (blueberry extract and NaF); GSE+NaF (grape seed extract and NaF); negative control (deionized water); and a positive control (commercialized mouthrinse containing stannous and fluoride). Each group was further divided into two subgroups (n = 15), according to the presence (P) or absence (NP) of salivary pellicle. The specimens were submitted to 10 cycles: 30 min incubation in human saliva (P) or only in humid chamber (NP), 2 min immersion in experimental solutions, 60 min of incubation in saliva (P) or not (NP), and 1 min erosive challenge. Dentine surface loss (dSL-10 and dSL-total), amount of degraded collagen (dColl) and total calcium release (CaR) were evaluated. Data were analyzed with Kruskal-Wallis, Dunn's and Mann-Whitney U tests (p>0.05).

RESULTS

Overall, the negative control presented the highest values of dSL, dColl and CaR, and the plant extracts showed different degrees of dentine protection. For the subgroup NP, GSE showed the best protection of the extracts, and the presence of fluoride generally further improved the protection for all extracts. For the subgroup P, only BE provided protection, while the presence of fluoride had no impact on dSL and dColl, but lowered CaR. The protection of the positive control was more evident on CaR than on dColl.

CONCLUSION

We can conclude that the plant extracts showed a protective effect against dentine erosion, regardless of the presence of salivary pellicle, and that the fluoride seems to improve their protection.

Synergistic effect between plant extracts and fluoride to protect against enamel erosion: An in vitro study

Polyphenol-rich solutions, such as plant extracts and teas, can modify the salivary pellicle and improve the protection against dental erosion. In this study, we further explored how these polyphenol-rich plant extracts solutions behave in the presence of fluoride. We distributed enamel specimens into 9 groups (n = 15): Control_No_F- (Deionized water); Control_F- (500 ppm F-), Grape_Seed_No_F- (Grape seed extract), Grape_Seed_F- (Grape seed extract + 500 ppm F-), Grapefruit_Seed_No_F- (Grapefruit seed extract), Grapefruit_Seed_F- (Grapefruit seed extract + 500 ppm F-), Blueberry_No_F- (Blueberry extract), Blueberry_F- (Blueberry extract + 500 ppm F-), and Sn2+/F-_Rinse (commercial solution containing 800 ppm Sn2+ and 500 ppm F-). The specimens were submitted to 5 cycles (1 cycle per day), and each cycle consisted of: salivary pellicle formation (human saliva, 30 min, 37°C), modification of the pellicle (2 min, 25°C), pellicle formation (60 min, 37°C), and an erosive challenge (1 min, citric acid). Between cycles, the specimens were kept in a humid chamber. Relative surface hardness (rSH), relative surface reflection intensity (rSRI) and calcium released to the acid were analysed, using general linear models, and Kruskal-Wallis with post-hoc Dunn's tests. We observed that the presence of fluoride in synergy with the extract solutions provided better protection than the groups containing extract or fluoride only. For rSH, we observed a significant main effect of extracts (F(4,117) = 9.20; p<0.001) and fluoride (F(1,117) = 511.55; p<0.001), with a significant interaction (F(3,117) = 6.71; p<0.001). Grape_Seed_F- showed the best protection, better than fluoride, and Sn2+/F-_Rinse. Calcium results also showed greater protection for the groups containing fluoride, whereas for rSRI, despite a significant interaction between extract and fluoride (F(3,117) = 226.05; p<0.001), the differences between the groups were not as clearly observed. We conclude that polyphenols from plant extracts, when combined with fluoride, improve the protective effect of salivary pellicles against enamel erosion.

Pellicle modification with natural bioproducts: Influence on tooth color under erosive conditions

Salivary pellicle was modified with bioproducts and we assessed the change in tooth color and the protection of enamel to erosion. Human enamel specimens were assigned to one of three solutions: grape seed extract or black tea (bioproducts), or deionized water (negative control); after which one half the specimens underwent erosive challenges. The specimens underwent 15 cycles involving salivary pellicle formation (10 min, 37°C), incubation in solution (2 min, 25°C), subsequent pellicle formation (90 min, 37°C). Half of the specimens was kept in a humid chamber and the other half was submitted to erosion (2 min, 1% citric acid). After 15 such cycles, the pellicle was removed. Tooth color and the surface reflection intensity were assessed after every five cycles and after pellicle removal. For non-eroded specimens, the exposure to bioproducts promoted significantly greater color change than the deionized water, with increases in yellow appearance. After pellicle removal, the color was similar in all non-eroded specimens. The bioproducts increased the surface reflection intensity over cycles. For the erosion-exposed specimens, erosion itself resulted in color change. Black tea and deionized water resulted in increased yellow appearance. Exposure to the bioproducts resulted in higher relative surface reflection intensity values over time, but only grape seed extract resulted in higher relative surface reflection intensity value at the time of pellicle removal. The bioproducts caused transient staining effect, which was reduced after pellicle removal. For enamel submitted to erosion, grape seed extract resulted in less color change and better protection of enamel against erosion than black tea or water.

Acquired pellicle engineering using a combination of organic (sugarcane cystatin) and inorganic (sodium fluoride) components against dental erosion

This study evaluated the combination of a sugarcane cystatin (CaneCPI-5) and sodium fluoride (NaF) in acquired pellicle engineering for the prevention of dental erosion in vitro. 75 human enamel specimens were prepared and divided into 5 treatment groups (n = 15/group): Deionized water (Control); Elmex™ (SnCl2/NaF/AmF); 0.1 mg/ml CaneCPI-5; 500 ppm NaF; and CaneCPI-5+NaF (Combination). The specimens were individually treated (200 μl; 2 min; 37 °C), then incubated in human saliva (200 μl; 1 h, at 37 °C) for acquired pellicle formation. Afterwards, the specimens were submitted to an erosive challenge (1% citric acid, pH 3.6, 10 ml, 2 min, 25 °C). This sequence was conducted 5 times. Percentage of surface microhardness change (%SMC), relative surface reflection intensity (rSRI) and calcium released to the citric acid (CR) were measured and analyzed by One-way ANOVA followed by Tukey's test (p<0.05). In general, all the treatments (SnCl2/NaF/AmF, CaneCPI-5, NaF and Combination) significantly protected the enamel when compared the control group. Regarding %SMC and rSRI, the Combination was the most effective treatment, reducing the %SMC significantly (p<0.01) when compared to all the other treatments, although this difference was not significant in the CR analysis. All treatments demonstrated a protective effect on enamel against dental erosion; however the combination of CaneCPI-5 with NaF showed a greater protection.

Beam particle identification and tagging of incompletely stripped heavy beams with HEIST

A challenge preventing successful inverse kinematics measurements with heavy nuclei that are not fully stripped is identifying and tagging the beam particles. For this purpose, the HEavy ISotope Tagger (HEIST) has been developed. HEIST utilizes two micro-channel plate timing detectors to measure the time-of-flight, a multi-sampling ion chamber to measure energy loss, and a high-purity germanium detector to identify isomer decays and calibrate the isotope identification system. HEIST has successfully identified ¹⁹⁸Pb and other nearby nuclei at energies of about 75 MeV/A. In the experiment discussed, a typical cut containing 89% of all ¹⁹⁸Pb⁸⁰⁺ in the beam had a purity of 86%. We examine the issues of charge state contamination. The observed charge state populations of these ions are presented and, using an adjusted beam energy, are well described by the charge state model GLOBAL.

Salivary Pellicle Modification with Grape-seed Extract: In Vitro Study on the Effect on Bacterial Adhesion and Biofilm Formation

PURPOSE

Grape-seed extract (GSE) contains polyphenols that readily adhere to proteins and modify the acquired enamel pellicle (AEP). The first step in biofilm formation is bacterial adhesion to the AEP-covered enamel. The aim of this in vitro study was to test whether AEP modification with GSE, fluoride (F-), or their combination (GSE+F-) modulates bacterial adhesion, biofilm metabolism and composition, or cariogenic demineralisation of the enamel.

MATERIALS AND METHODS

The study comprised 3 parts: 1) single-strain Streptococcus gordonii species, 2) a five-species biofilm model, or 3) biofilm (re-)formation using the five-species biofilm model after removal of initial biofilm with toothbrushing. Human whole-mouth stimulated saliva was used to form an AEP on human enamel specimens. The AEP was incubated in water (control), or modified with GSE, F-, or GSE+F-. Bacterial adhesion, biofilm diversity, metabolic activity, biofilm mass, and cariogenic demineralisation (surface hardness) of enamel were assessed after incubation in bacterial broths after 4 h or 22 h. Differences between groups were analysed with one-way ANOVA and post-hoc Bonferroni tests.

RESULTS

GSE and GSE+F- statistically significantly decreased single-strain S. gordonii adhesion, but had no relevant influence when the five-species biofilm model was used. In the biofilm (re-)formation model, GSE reduced bacterial adhesion compared to GSE+F-, while F- caused less cariogenic demineralisation than was found in the control group.

CONCLUSION

AEP modified with GSE retards S. gordonii adhesion, but it does not influence the formation, metabolism and composition of a cariogenic multi-species biofilm.

Acquired pellicle engineering with proteins/peptides: Mechanism of action on native human enamel surface

OBJECTIVE

This study investigated the mechanism of action of different proteins/peptides (separately or in combination), focusing on how they act directly on the native enamel surface and on modifying the salivary pellicle.

METHODS

A total of 170 native human enamel specimens were prepared and submitted to different treatments (2 h; 37 °C): with deionized water, CaneCPI-5, Hemoglobin, Statherin, or a combination of all three proteins/peptides. The groups were subdivided into treatment acting on the enamel surface (NoP - absence of salivary pellicle), and treatment modifying the salivary pellicle (P). Treatment was made (2 h; 37 °C) in all specimens, and later, for P, the specimens were incubated in human saliva (2 h; 37 °C). In both cases, the specimens were immersed in 1% citric acid (pH 3.6; 2 min; 25 °C). Calcium released from enamel (CaR) and its relative surface reflection intensity (%SRI) was measured after 5 cycles. Between-group differences were verified with two-way ANOVA, with "presence of pellicle" and "treatment" as factors (α = 0.05).

RESULTS

The presence of pellicle provided better protection regarding %SRI (p < 0.01), but not regarding CaR (p = 0.201). In relation to treatment, when compared to the control group, all proteins/peptides provided significantly better protection (p < 0.01 for %SRI and Car). The combination of all three proteins/peptides demonstrated the best protective effect (p < 0.01 for %SRI).

CONCLUSION

Depending on the protein or peptide, its erosion-inhibiting effect derives from their interaction with the enamel surface or from modifying the pellicle, so a combination of proteins and peptides provides the best protection.

CLINICAL SIGNIFICANCE

The present study opens a new direction for a possible treatment with a combination of proteins for native human enamel, which can act directly on the enamel surface as well on the modification of the salivary pellicle, for the prevention of dental erosion.

Is the Erosion-Protective Effect Still Maintained when Tin Concentrations Are Reduced in Mouth Rinse Solutions?

OBJECTIVE

As a preventive measure, tin (Sn2+)-containing products have a great potential to prevent enamel surface loss during erosive challenges, but adverse effects of high Sn2+ concentrations, such as astringent feeling of the teeth, are reported. Therefore, the main aim of this in vitro study was to develop a solution with lower Sn2+ concentrations that can still prevent dental erosion.

METHODS

A total of 162 enamel specimens were prepared from human premolars, which were selected from a pool of extracted teeth. The specimens were randomly distributed to 9 groups (each group n = 18 enamel specimens) according to the different test treatments: a humid chamber (no treatment) as the negative control, the commercial Elmex® Erosion Protection mouth rinse as the positive control, and 7 solutions either with lower Sn2+ concentrations and/or containing flavoring. The experiment included 4 cycles, consisting of pellicle formation by incubating the specimens with 200 μL of human saliva at 37°C for 1 h, then placing the specimens in the treatment for 2 min (60 mL, 30°C, shaking at 70 rpm), and later submitting them to an erosive challenge for 1 min in citric acid (60 mL 1%, pH 3.6, 30°C). Surface hardness was measured with a Vickers diamond and surface reflection intensity was measured with a reflectometer.

RESULTS

The control group performed significantly worse than all other solutions containing Sn2+. In general, there were no significant differences among the Sn2+-containing groups, and they presented similar protective effects on the enamel even when Sn2+ concentrations were reduced and flavorings were added.

CONCLUSION

Sn2+ concentrations in mouth rinses may be lowered to 200 ppm without compromising the anti-erosive properties of the solution.

The effect of red wine in modifying the salivary pellicle and modulating dental erosion kinetics

This study investigated the potential of red wine in modulating dental erosion kinetics in the presence or absence of salivary pellicle. Polished human enamel specimens were used in two conditions; presence or absence of acquired enamel pellicle; and subdivided according to exposure: red wine, orange juice, apple juice, or citric acid. The specimens were incubated in clarified whole human saliva (presence of acquired enamel pellicle) or in a humid chamber (absence of acquired enamel pellicle) for 2 h at 37°C, then in the test substances for 1 min, at 25°C, under shaking. This was repeated four times. Surface hardness was measured initially and after each cycle and surface reflection intensity was measured initially and after all cycles. In the presence of acquired enamel pellicle, red wine caused the least surface hardness loss, followed by orange juice, apple juice, and citric acid. Statistically significantly less surface reflection intensity loss was observed for red wine and orange juice than for apple juice and citric acid. In the absence of acquired enamel pellicle, red wine and orange juice caused less surface hardness loss than apple juice and citric acid. Orange juice showed the least surface reflection intensity loss, followed by red wine, citric acid, and apple juice. The polyphenol composition of these drinks can notably modulate the erosion kinetics.

Salivary pellicle modification with polyphenol-rich teas and natural extracts to improve protection against dental erosion

OBJECTIVE

To investigate the modification of the salivary pellicle with different polyphenol-rich teas and natural extracts for the protection against dental erosion.

METHODS

We performed two experiments: one with teas (Green tea, Black tea, Peppermint tea, Rosehip tea, negative control [NC]) and other with natural extracts (Grape seed, Grapefruit seed, Cranberry, Propolis, NC), where NC was deionized water. A total of 150 enamel specimens were used (n = 15/group). Both experiments followed the same design, consisting of 5 cycles of: salivary pellicle formation (30 min, 37 °C), modification with the solutions (30 min, 25 °C), further salivary pellicle formation (60 min, 37 °C) and erosive challenge (1 min, 1% citric acid, pH 3.6). Relative surface microhardness (rSMH), relative surface reflection intensity (rSRI) and amount of calcium release (CaR) were evaluated. Data were analysed with Kruskal-Wallis and Wilcoxon rank sum tests with Bonferroni correction (α = 0.05).

RESULTS

Regarding teas, Black and Green teas showed the best protection against dental erosion, presenting higher rSMH and lower CaR than NC. Peppermint tea was not different to NC and Rosehip tea caused erosion, showing the highest CaR and greatest loss of SMH and SRI. Regarding natural extracts, Grape seed and Grapefruit seed extracts presented the best protective effect, with significantly higher rSMH and lower CaR. Cranberry caused significantly more demineralization; and Propolis did not differ from NC.

CONCLUSION

Green tea, Black tea, Grape seed extract and Grapefruit seed extract were able to modify the salivary pellicle and improve its protective effect against enamel erosion, but Rosehip tea and Cranberry extract caused erosion.

CLINICAL RELEVANCE

Some some bio-products, such as teas and natural extracts, improve the protective effect of the salivary pellicle against enamel erosion. More studies should be performed in order to test the viability of their use as active ingredients for oral care products.

Salivary Hemoglobin Protects against Erosive Tooth Wear in Gastric Reflux Patients

<b><i>Objective:</i></b> Saliva is the most important biological factor to protect against erosive tooth wear (ETW). Gastroesophageal reflux disease (GERD) patients have an increased risk of ETW due to the frequent presence of intrinsic acids in the oral cavity. Remarkably, not all GERD patients suffer from ETW, which might be due to differences in the composition of the saliva. <b><i>Methods:</i></b> This study compared the proteomic profile of saliva in patients (1) with GERD and ETW (basic erosive wear examination, BEWE, score ≥9; GE group) and (2) with GERD without ETW (BEWE = 0; GNE group) using shotgun label-free quantitative proteomic analysis nLC-ESI-MS/MS. The ability of hemoglobin (Hb) to protect against initial enamel erosion caused by a daily 10-s immersion of enamel specimens in 0.01 M HCl (pH 2.3) for 3 days was evaluated in vitro for proof of concept. Surface hardness change was used as response variable. <b><i>Results:</i></b> The differential expression of Hb subunits was significantly increased in the GNE group versus the GE group, in particular the Hb α-subunit that showed a &#x3e;22-fold increase. Expressions of serum albumin (4.5-fold) and isoforms of cytoskeletal keratin type II (&#x3e;3-fold) were also increased in the GNE group. Proteinase inhibitors, such as α₁-antitrypsin and α₂-macroglobulin, were only identified in the GNE group. In vitro, Hb (1.0 and 4.0 mg/mL) significantly reduced initial enamel erosion compared to a negative control after 3 days. <b><i>Conclusions:</i></b> Our results indicate that many proteins, with special emphasis on Hb, may be involved in the resistance of GERD patients to the occurrence of ETW. These proteins may be candidates for inclusion in dental products to protect against ETW.

Pellicle Modification with Casein and Mucin Does Not Affect Surface Loss from Erosion and Abrasion

AIM

A combination of the proteins casein and mucin is known to modify the salivary pellicle and improve its protection of the underlying enamel from erosion. It is so far not known if this protection is confined solely to erosion, or if it also extends to abrasion, and this in vitro study aimed at investigating this question.

METHODS

A total of 72 human enamel specimens were prepared and randomly assigned to four groups: pellicle (P), casein/mucin (CM), pellicle + casein/mucin (PCM), and control (Ctrl). Each specimen underwent five cycles, each cycle consisting of a pellicle/treatment part, an erosion part (3 min in 1% citric acid, pH 3.6, 25°C, 70 rpm), and an abrasion part (50 toothbrush strokes within 25 s in toothpaste slurry with a 200-g load). The pellicle/treatment part consisted of 2 h of incubation in whole human saliva for group P, 2 h of incubation (25°C, 70 rpm) in a protein mixture of 1% casein and 0.27% mucin for group CM, and 2 h of incubation in saliva followed by 2 h of incubation in the protein mixture for group PCM. The fourth group (Ctrl) served as the control and was kept in a humid chamber without saliva or protein treatment. The enamel surfaces were scanned with an optical profilometer initially and after the final cycle, and surface loss was analyzed. Furthermore, the surface microhardness (SMH) was measured initially, after each pellicle/treatment part and each erosion cycle, and after the final abrasion cycle. The results were analyzed with Kruskal-Wallis and Wilcoxon tests with Bonferroni corrections.

RESULTS

The different treatments did not show differences in surface loss and therefore did not protect enamel from surface loss by abrasion. Nonetheless, we observed differences in the SMH values, namely the Ctrl group being significantly softer than the experimental groups.

CONCLUSION

The observed differences in SMH suggest that a different abrasion protocol could lead to differences in surface loss, and further investigation of whether and under which conditions pellicle modification leads to increased resistance to abrasion remains worthwhile.

Long-term outcomes of rituximab therapy in pemphigus

BACKGROUND

Rituximab induces a rapid remission in most patients with pemphigus.

OBJECTIVE

Our aim was to assess the long-term efficacy of rituximab in this disease.

METHOD

We conducted a retrospective study of 59 patients with pemphigus treated with rituximab and observed over a median period of 104 months.

RESULTS

The rate of complete remission off therapy (CRoff) after the first rituximab cycle was 39%, increasing to 61% with additional rituximab courses. Long-term CRoff was achieved in 27% of patients. The recurrence rate after the first rituximab cycle was 63%, decreasing to approximately 40% with subsequent rituximab cycles. Median time to relapse after the first and subsequent rituximab cycles was 25 months. Renewed rituximab therapy reinduced complete remission in 94% of cases. Baseline anti-desmoglein antibody levels of ≤250 U/mL were significantly associated with the outcome of CRoff. In paired serum samples obtained before the first and six months after the last rituximab therapy, significant reductions of desmoglein-specific autoantibodies were observed. Patients relapsing after a complete remission induced by the first rituximab cycle were more likely to achieve CRoff than patients relapsing after a less favourable outcome and non-responders. There was no significant difference in age, sex, pemphigus subtype, rituximab dosing and disease duration between patients achieving CRoff and those not meeting this end point.

CONCLUSIONS

Lower desmoglein-specific antibody levels at baseline were predictive of CRoff. In patients receiving multiple rituximab cycles, complete remission after the first cycle was associated with a favourable long-term outcome. Repeated rituximab courses were highly effective for relapsed disease and improved the overall outcome.

Pellicle Modification with Casein and Mucin Does Not Promote In Vitro Bacterial Biofilm Formation

PURPOSE

During biofilm formation, bacterial species do not attach directly onto the enamel surface, but rather onto the salivary pellicle. Salivary pellicle modification with casein and mucin can hinder erosive demineralisation of the enamel, but it should also not promote bacterial adhesion. The aim of our study was to assess whether salivary pellicle modification with casein, or mucin, or a mixture of both proteins (casein and mucin) influence bacterial adhesion, biofilm diversity, metabolism and composition, or enamel demineralisation, after incubation in: (a) a single bacterial model; (b) a five-species biofilm model; or (c) biofilm reformation using the five-species biofilm model after removal of initial biofilm with toothbrushing.

MATERIALS AND METHODS

Enamel specimens were prepared from human molars. Whole-mouth stimulated human saliva was used for pellicle formation. Four pellicle modification groups were established: control (non-modified pellicle); casein - modified with 0.5% casein; mucin - modified with 0.5% mucin; casein and mucin - modified with 0.5% casein and 0.5% mucin. Bacterial adhesion, biofilm diversity, metabolic activity, biofilm mass, and demineralisation (surface hardness) of enamel were assessed after incubation in bacterial broths after 6 h or 24 h.

RESULTS

After 24 h incubation in the five-species biofilm model, the mucin group presented significantly lower biofilm mass than the control (p = 0.028) and the casein and mucin (p = 0.030) groups. No other differences between the groups were observed in any of the other experimental procedures.

CONCLUSION

Pellicle modification with casein and mucin does not promote in vitro bacterial biofilm formation.

[The pathologist Friedrich Feyrter in National Socialism]

BACKGROUND

Up until now, very little has been reported about the important pathologist Friedrich Feyrter in the time of National Socialism.

OBJECTIVES

What was Feyrter's attitude towards National Socialism?

METHODS

Bibliographic and previously unevaluated archival sources were subjected to a historical-critical examination.

RESULTS

Feyrter was a member of the Nazi Party. In 1938 and 1950 he gave contradictory information concerning the year he joined the party.

CONCLUSIONS

At the very least, he was a political opportunist.

Quantitative evaluation of the progressive wear of powered interproximal reduction systems after repeated use : An in vitro study

PURPOSE

To evaluate the residual surface roughness of 5 common diamond-coated interproximal reduction (IPR) systems after consecutive in vitro applications in relation to system, diamond grain size, and instrument thickness.

METHODS

IPR was performed on 80 extracted human incisors using motor-driven strips and discs under predefined conditions. The IPR auxiliaries were applied at 5 consecutive sessions of 20 s on intact interproximal surfaces, and the surface profile (R_a, R_z, R_max) was analyzed at baseline and after each session with an optical profilometer.

RESULTS

No overall significant difference in the roughness values was found between systems (P = 0.07 for R_a, P = 0.33 for R_z, and P = 0.48 for R_max). There was a significant average decrease of R_a, R_z, and R_max for all systems for every unit increase in time by -0.171 μm (P < 0.001), -3.297 (P ≤ 0.001), and -2.788 μm (P = 0.001), respectively. R_a, R_z, and R_max values increased significantly, i.e., by 0.194 μm (P = 0.003), 5.890 μm (P = 0.001), and 5.319 μm (P = 0.010) as instrument thickness increased by one unit. No significant reductions in R_a, R_z, and R_max were observed across grain sizes (-0.008 μm [P > 0.05], -0.244 μm [P > 0.05], and -0.179 μm [P > 0.05], respectively). There was no evidence of interaction between system and time as the P values for R_a, R_z, and R_max were 0.88, 0.51, and 0.70, respectively.

CONCLUSIONS

All IPR materials presented significant gradual decrease of surface roughness after repeated applications. There were no significant roughness changes among auxiliaries of different grain sizes. Thinner auxiliaries showed significantly more roughness reduction, possibly requiring more frequent replacement than thick auxiliaries in clinical practice.

[The erosive potential of different drinks, foodstuffs and medicines – a vade mecum]

There is increasing evidence that the excessive consumption of acidic drinks and foods contributes to dental erosion and may be an important contributing factor for erosive tooth wear. The aims of the present contribution were twofold: (1) to assess the erosive potential of 116 dietary substances and medications; (2) to determine the chemical properties with an impact on the erosive potential. Using 300 deciduous and 1,020 permanent human teeth, enamel specimens were prepared and a pellicle was formed with human saliva. The erosive potential of the tested agents was quantified as the change in surface hardness of the specimens after 2 min of erosion. To characterise these agents, the following chemical properties were determined: pH, titratable acidity to pH 7, concentrations of Ca, Pi and F, as well as the degree of saturation with respect to hydroxyapatite. We conclude that some drinks, foodstuffs and medications may cause erosion. However, pH is not the only decisive factor, since some acidic substances did not cause dental erosion.

Constraining the Neutron Star Compactness: Extraction of the ^{23}Al(p,γ) Reaction Rate for the rp Process

The ^{23}Al(p,γ)^{24}Si reaction is among the most important reactions driving the energy generation in type-I x-ray bursts. However, the present reaction-rate uncertainty limits constraints on neutron star properties that can be achieved with burst model-observation comparisons. Here, we present a novel technique for constraining this important reaction by combining the GRETINA array with the neutron detector LENDA coupled to the S800 spectrograph at the National Superconducting Cyclotron Laboratory. The ^{23}Al(d,n) reaction was used to populate the astrophysically important states in ^{24}Si. This enables a measurement in complete kinematics for extracting all relevant inputs necessary to calculate the reaction rate. For the first time, a predicted close-lying doublet of a 2_{2}^{+} and (4_{1}^{+},0_{2}^{+}) state in ^{24}Si was disentangled, finally resolving conflicting results from two previous measurements. Moreover, it was possible to extract spectroscopic factors using GRETINA and LENDA simultaneously. This new technique may be used to constrain other important reaction rates for various astrophysical scenarios.

Acquired Enamel Pellicle Modification with Casein and Mucin in Different Concentrations and its Impact on Initial Dental Erosion

Casein and mucin have been shown to improve the erosion-protective properties of the pellicle when applied in combination. The aim of this in vitro study was to optimize the concentrations of these 2 proteins to achieve a maximum protective effect. For the 2 parts of this study, we prepared a total of 195 human enamel specimens and randomly assigned them to 13 groups, corresponding to 11 different casein-mucin concentration-combinations tested and 2 negative control groups (humid chamber). They underwent 5 cycles, consisting of pellicle formation from human whole saliva (2 h, 30°C), modification of the pellicle with casein and mucin in different concentrations (immersion in protein solutions for 2 h, 30°C), and erosion for 1 min in citric acid (0.65%, pH 3.5, 30°C). Surface microhardness (SMH), surface reflection intensity (SRI), and in the first part also calcium release were monitored during the cycling process, and analyzed with Kruskal-Wallis and post hoc Dunn’s tests. The results suggest that the best concentrations to achieve the highest erosion-protective effect are 3.0% casein and 0.81% mucin, which lead to a significant protection as measured by SMH as well as SRI compared to the unmodified pellicle. For the calcium release, no significant differences were found. This concentration combination corresponds to a general raise of the protein concentrations and a change in the molar ratio of the proteins as compared to earlier studies. Casein and mucin could now be incorporated at the determined concentration as natural ingredients in oral care products designed to protect against erosion.

The use of fluoride for the prevention of dental erosion and erosive tooth wear in children and adolescents

BACKGROUND

Erosive tooth wear (ETW) has gained increasing clinical relevance. It is estimated that worldwide 30-50% of deciduous and 20-45% of permanent teeth are affected. One of the most important nutritional factors causing ETW is the overconsumption of soft drinks, but also patient-related factors like reflux or eating disorders can lead to erosive lesions. Whether acids lead to erosive demineralisation depends on their degree of saturation with respect to tooth mineral at their actual pH.

REVIEW

Fluoride compounds like sodium or amine fluoride seem to be of limited efficacy against erosion, the main reason for this is the missing biofilm in the erosive process as well as the lower pH of the acids compared to bacterial acids. This means that to achieve some kind of preventive effect it would be necessary to use products with higher fluoride concentration, which is not an appropriate option for small children, and/or to increase the frequency of application. In addition, the fluoride compound plays a role as promising effects were found when fluoride is combined with titanium or stannous ions. TiF₄ can cause acid-resistant surface coatings and when Sn²⁺/F^- formulations are applied, Sn is not only found on the surface but is also incorporated into enamel and dentine. Both effects make the tooth surface more resistant against acid demineralisation. Different fluoride-containing vehicles have been tested to prevent erosion/ETW, such as toothpastes, rinses, gels and varnishes. Toothpastes offer some degree of protection, especially Sn²⁺-containing formulations, but effects of the active ingredients are sometimes counteracted by the presence of abrasives.

CONCLUSION

Detecting associated factors and influencing them is the main instrument in arresting erosive tooth wear. Additionally, patients at risk for dental erosion should always use an additional fluoride source preferably containing Sn²⁺.

Clinical impact of the subclonal architecture and mutational complexity in chronic lymphocytic leukemia

Genome studies of chronic lymphocytic leukemia (CLL) have revealed the remarkable subclonal heterogeneity of the tumors, but the clinical implications of this phenomenon are not well known. We assessed the mutational status of 28 CLL driver genes by deep-targeted next-generation sequencing and copy number alterations (CNA) in 406 previously untreated patients and 48 sequential samples. We detected small subclonal mutations (0.6-25% of cells) in nearly all genes (26/28), and they were the sole alteration in 22% of the mutated cases. CNA tended to be acquired early in the evolution of the disease and remained stable, whereas the mutational heterogeneity increased in a subset of tumors. The prognostic impact of different genes was related to the size of the mutated clone. Combining mutations and CNA, we observed that the accumulation of driver alterations (mutational complexity) gradually shortened the time to first treatment independently of the clonal architecture, IGHV status and Binet stage. Conversely, the overall survival was associated with the increasing subclonal diversity of the tumors but it was related to the age of patients, IGHV and TP53 status of the tumors. In conclusion, our study reveals that both the mutational complexity and subclonal diversity influence the evolution of CLL.

Chemical and physical factors of desensitizing and/or anti-erosive toothpastes associated with lower erosive tooth wear

Toothpastes have a complex formulation and their different chemical and physical factors will influence their effectiveness against erosive tooth wear (ETW). We, therefore, investigated the effect of different desensitizing and/or anti-erosive toothpastes on initial enamel erosion and abrasion, and analysed how the interplay of their chemical and physical factors influences ETW. Human enamel specimens were submitted to 5 erosion-abrasion cycles using 9 different toothpastes and an artificial saliva group, and enamel surface loss (SL) was calculated. Chemical and physical factors (pH; presence of tin; calcium, phosphate and fluoride concentrations; % weight of solid particles; wettability; and particle size) of the toothpaste slurries were then analysed and associated with the amount of SL in a multivariate model. We observed that all desensitizing and/or anti-erosive toothpastes presented different degrees of SL. Besides pH and fluoride, all other chemical and physical factors were associated with SL. The results of this experiment indicate that enamel SL occurs independent of whether the toothpastes have a desensitizing or anti-erosive claim, and that lower SL is associated with the presence of tin, higher concentration of calcium and phosphate, higher % weight of solid particles, smaller particle size, and lower wettability.

The effect of different salivary calcium concentrations on the erosion protection conferred by the salivary pellicle

Different proportions of mineral ions in saliva can influence the protective effect the salivary pellicle provides against dental erosion. To investigate the effect of different calcium concentrations in human saliva on the protection against enamel erosion, enamel specimens were divided into 8 treatment groups: humid chamber (Ctrl); whole mouth stimulated human saliva (HS); artificial saliva containing different calcium concentrations (AS_low, AS_medium, AS_high); and dialysed human saliva containing different calcium concentrations (DS_low, DS_medium, DS_high). The specimens underwent 4 cycles of incubation in the treatment group followed by an erosive challenge. Surface hardness and calcium release were measured during the cycling process. All DS groups exhibited significantly higher enamel surface softening than HS and the corresponding AS groups. Among the DS groups, the surface softening was significantly higher in DS_low than in DS_high. No significant differences were found within the AS or DS groups regarding calcium release. The results of this study indicated that erosion protection conferred by saliva depends on an interplay between salivary proteins and ions. While both proteins and ions have a positive effect on their own, the combination of the two can lead to different degrees of protection or even negative effects, depending on the relative concentrations.

In vitro evaluation of modified surface microhardness measurement, focus variation 3D microscopy and contact stylus profilometry to assess enamel surface loss after erosive-abrasive challenges

The aim of the study was to compare surface loss values after erosion-abrasion cycles obtained with modified surface microhardness measurement (mSMH), focus variation 3D microscopy (FVM) and contact stylus profilometry (CSP). We cut human molars into buccal and lingual halves, embedded them in resin and ground 200 μm of enamel away. The resulting surfaces were polished. To maintain a reference area, we applied Block-Out resin to partly cover the enamel surface. The samples were incubated in artificial saliva (37°C; 1 h), then rinsed in deionized water (10 s) and dried with oil-free air (5 s). We immersed the specimens individually in 30 mL citric acid (1%, pH 3.6) for 2 min (25°C, 70 rpm dynamic conditions) before brushing them (50 strokes, 200 g) in an automatic brushing machine with toothpaste-slurry. We calculated the surface loss as per mSMH, by re-measuring the length of the same six indentations made before the abrasive challenge. The experiment consisted of five experimental groups that received between 2 and 10 erosion-abrasion cycles. Each group contained 15 specimens and samples in groups 1, 2, 3, 4 and 5 underwent a total of 2, 4, 6, 8 and 10 cycles, respectively. The resin was removed from the reference area in one piece under 10× magnification and the FVM and CSP were performed. Agreement between the methods was calculated with the intraclass correlation coefficient (ICC) and depicted in Bland-Altman plots. All methods presented a linear pattern of surface loss measurements throughout the experiment, leading overall to a strong, statistically significant correlation between the methods (ICC = 0.85; p<0.001). So, despite the different surface loss values, all methods presented consistent results for surface loss measurement.

Aneurysmal bone cyst (ABC) : treatment options and proposal of a follow-up regime

The aim of this study was to describe treatment -options and develop a follow-up regime for the -aneurysmal bone cyst, a neoplastic bone lesion with a noticeable recurrence rate. Reports of 28 patients and a mean follow-up of 42.2 months treated multidisciplinary were analysed. Data were complemented by a literature review including 790 patients. Patient age was from seven to 57 years, in line with the literature (1-69 years). Lesions most frequently affect long bones, spine and pelvis ; pain is the most common symptom. Treatment modalities vary, recurrences -occurred in 26.1% in our series, rates ranged from 0-60% in the literature, with the vast majority within 2 years. With regard to the findings we propose, irrespective of treatment, a follow-up regime including clinical survey and imaging, best with MRI, at 3 months, 6 months and at half-yearly intervals within the first two and yearly within the third to fifth year.

Does erosion progress differently on teeth already presenting clinical signs of erosive tooth wear than on sound teeth? An in vitro pilot trial

Background

Erosive tooth wear (ETW) is clinically characterized by a loss of tooth surface, and different enamel depths may have different susceptibility to demineralization. Therefore, the aim of this in vitro pilot study was to assess if the progression of erosive demineralization is faster on teeth already presenting signs of ETW when compared to originally sound teeth.

Methods

We selected 23 central incisors: 14 were clinically sound (Sound) and 9 presented clinical signs of early erosive tooth wear (ETW-teeth). The teeth were embedded in resin, leaving an uncovered window of native enamel (6.69 ± 2.30 mm²) on the incisal half of the labial surface. We measured enamel surface reflection intensity (SRI) initially and after each consecutive erosive challenge (1 % citric acid, total of 4, 8, 12, 16, 20 and 24 min). Calcium released to the citric acid was measured with an atomic absorption spectrometer.

Results

We observed higher initial SRI values in ETW-teeth than in Sound teeth (p = 0.007). During in vitro erosive demineralization, we observed that erosion on originally Sound teeth progressed significantly slower (p = 0.033) than on ETW-teeth: SRI decreased by 75 % (from 100 to 25 %) on Sound teeth, and by 89 % (from 100 to 11 %) on ETW-teeth. Calcium release increased during erosion, but presented no significant differences (p = 0.643) between originally Sound (0.031 μmol/mm²) and ETW-teeth (0.032 μmol/mm²). There was satisfactory correlation between calcium release and rSRI values (r_s = −0.66).

Conclusion

The optical reflectometer distinguished originally sound teeth from those with signs of ETW, and the results suggest that acid demineralization progresses differently on teeth already presenting clinical signs of ETW than on sound teeth.

Electronic supplementary material

The online version of this article (doi:10.1186/s12903-016-0231-y) contains supplementary material, which is available to authorized users.

A new hand-held optical reflectometer to measure enamel erosion: correlation with surface hardness and calcium release

In the present study, the surface reflection intensity (SRI) was measured from enamel with different induced erosion degrees using a hand-held pen-size reflectometer (Hand-Held) and a Table-Top reflectometer. To validate the Hand-Held reflectometer, we correlated its optical signals with the change of surface microhardness (SMH), and amount of calcium released from the enamel samples during erosion. We used 124 tooth enamel specimens that were exposed to an erosive challenge of either 1, 2, 4, 6, 8, or 10 minutes. SRI and SMH were measured before and after the erosive challenge and we also measured the amount of calcium released to the citric acid. Relative SRI loss (rSRI_loss) and relative SMH loss (rSMH_loss) were calculated. rSRI_loss from the Hand-Held and the Table-Top reflectometers were similar and significantly correlated to rSMH_loss and calcium release. The regression analyses showed a significant association between rSRI_loss from both reflectometers and rSMH_loss and calcium, showing that both reflectometers can be used to measure erosive demineralization of enamel. The Hand-Held reflectometer is capable of assessing in vitro erosion, correlating to other commonly used methods. It is small, easy to handle and provides fast measurement, being a possible candidate to measure erosion in clinical studies.

Immunoproteasome dysfunction augments alternative polarization of alveolar macrophages

The proteasome is a central regulatory hub for intracellular signaling by degrading numerous signaling mediators. Immunoproteasomes are specialized types of proteasomes involved in shaping adaptive immune responses, but their role in innate immune signaling is still elusive. Here, we analyzed immunoproteasome function for polarization of alveolar macrophages, highly specialized tissue macrophages of the alveolar lung surface. Classical activation (M1 polarization) of primary alveolar macrophages by LPS/IFNγ transcriptionally induced all three immunoproteasome subunits, low molecular mass protein 2 (LMP2), LMP7 and multicatalytic endopeptidase complex-like 1, which was accompanied by increased immunoproteasome activity in M1 cells. Deficiency of LMP7 had no effect on the LPS/IFNγ-triggered M1 profile indicating that immunoproteasome function is dispensable for classical alveolar macrophage activation. In contrast, IL-4 triggered alternative (M2) activation of primary alveolar macrophages was accompanied by a transcriptionally independent amplified expression of LMP2 and LMP7 and an increase in immunoproteasome activity. Alveolar macrophages from LMP7 knockout mice disclosed a distorted M2 profile upon IL-4 stimulation as characterized by increased M2 marker gene expression and CCL17 cytokine release. Comparative transcriptome analysis revealed enrichment of IL-4-responsive genes and of genes involved in cellular response to defense, wounding and inflammation in LMP7-deficient alveolar macrophages indicating a distinct M2 inflammation resolving phenotype. Moreover, augmented M2 polarization was accompanied by amplified AKT/STAT6 activation and increased RNA and protein expression of the M2 master transcription factor interferon regulatory factor 4 in LMP7^−/− alveolar macrophages. IL-13 stimulation of LMP7-deficient macrophages induced a similar M2-skewed profile indicative for augmented signaling via the IL-4 receptor α (IL4Rα). IL4Rα expression was generally elevated only on protein but not RNA level in LMP7^−/− alveolar macrophages. Importantly, specific catalytic inhibition with an LMP7-specific proteasome inhibitor confirmed augmented IL-4-mediated M2 polarization of alveolar macrophages. Our results thus suggest a novel role of immunoproteasome function for regulating alternative activation of macrophages by limiting IL4Rα expression and signaling.