Ultrasound assisted extraction of red cabbage and encapsulation by freeze-drying: moisture sorption isotherms and thermodynamic characteristics of encapsulate

In the present study encapsulation of ultrasound assisted red cabbage extract was carried out using four different carrier agents such as maltodextrin, gum arbic, xanthan gum, and gellan gum. Among the four hydrocolloids investigated, maltodextrin was found to have the least destructive effect on anthocyanin content (14.87 mg C3G/g dw), TPC (54.51 ± 0.09 mg GAE/g dw), TFC (19.82 Mg RE/g dw) and antioxidant activity (74.15%) upon freeze-drying. Subsequently a storage study was conducted using maltodextrin as carrier agent at 25-50 °C. The Clausius-Clapeyron equation was used to evaluate the net isosteric heat (qst) of water adsorption. The differential entropy (ΔS) and qst decreased from 82.298 to 38.628 J/mol, and 27.518 kJ/mol to 12.505 kJ/mol, respectively as the moisture content increased from 2 to 14%. The value of isokinetic energy and Gibb's free energy were found to be 364.88 and - 1.596 kJ/mol for freeze dried red cabbage.

Graphical abstract

Effects of pressure, shear, temperature, and their interactions on selected milk quality attributes

The effects of pressure, temperature, shear, and their interactions on selected quality attributes and stability of milk during ultra-shear technology (UST) were investigated. The UST experiments include pressure (400 MPa) treatment of the milk sample preconditioned at 2 different initial temperatures (25°C and 15°C) and subsequently depressurizing it via a shear valve at 2 flow rates (low: 0.15-0.36 g/s; high: 1.11-1.22 g/s). Raw milk, high-pressure processed (HPP; 400 MPa, ~40°C for 0 and 3 min) and thermal treated (72°C for 15 s) milk samples served as the controls. The effect of different process parameters on milk quality attributes were evaluated using particle size, zeta potential, viscosity, pH, creaming, lipase activity, and protein profile. The HPP treatment did not cause apparent particle size reduction but increased the sample viscosity up to 3.08 mPa·s compared with 2.68 mPa·s for raw milk. Moreover, it produced varied effects on creaming and lipase activity depending on hold time. Thermal treatment induced slight reduction in particle size and creaming as compared with raw milk. The UST treatment at 35°C reduced the effective diameter of sample particles from 3,511.76 nm (raw milk) to 291.45 nm. This treatment also showed minimum relative lipase activity (29.93%) and kept milk stable by preventing creaming. The differential effects of pressure, shear, temperature, and their interactions were evident, which would be useful information for equipment developers and food processors interested in developing improved food processes for dairy beverages.

Effects of Lipid Solid Mass Fraction and Non-Lipid Solids on Crystallization Behaviors of Model Fats under High Pressure

Different fractions of fully hydrogenated soybean oil (FHSBO) in soybean oil (10–30% w/w) and the addition of 1% salt (sodium chloride) were used to investigate the effect of high-pressure treatments (HP) on the crystallization behaviors and physical properties of the binary mixtures. Sample microstructure, solid fat content (SFC), thermal and rheological properties were analyzed and compared against a control sample (crystallized under atmospheric condition). The crystallization temperature (T_s) of all model fats under isobaric conditions increased quadratically with pressure until reaching a pressure threshold. As a result of this change, the sample induction time of crystallization (t_c) shifted from a range of 2.74–0.82 min to 0.72–0.43 min when sample crystallized above the pressure threshold under adiabatic conditions. At the high solid mass fraction, the addition of salt reduced the pressure threshold to induce crystallization during adiabatic compression. An increase in pressure significantly reduced mean cluster diameter in relation to the reduction of t_c regardless of the solid mass fraction. In contrast, the sample macrostructural properties (SFC, storage modulus) were influenced more significantly by solid mass fractions rather than pressure levels. The creation of lipid gel was observed in the HP samples at 10% FHSBO. The changes in crystallization behaviors indicated that high-pressure treatments were more likely to influence crystallization mechanisms at low solid mass fraction.

High-Pressure Processing of Broccoli Sprouts: Influence on Bioactivation of Glucosinolates to Isothiocyanates

Effects of high-pressure processing (HPP, 100-600 MPa for 3 min at 30 °C) on the glucosinolate content, conversion to isothiocyanates, and color changes during storage in fresh broccoli sprouts were investigated. A mild heat treatment (60 °C) and boiling (100 °C) were used as positive and negative controls, respectively. Glucosinolates were quantified using liquid chromatography-mass spectrometry, and isothiocyanates were quantified using high-performance liquid chromatography-photodiode array detection. A formation of isothiocyanates was observed in all high-pressure-treated sprouts. The highest degree of conversion (85%) was observed after the 600 MPa treatment. Increased isothiocyanate formation at 400-600 MPa suggests an inactivation of the epithiospecifier protein. During storage, color changed from green to brownish, reflected by increasing a* values and decreasing L* values. This effect was less pronounced for sprouts treated at 100 and 600 MPa, indicating an influence on the responsible enzymes. In summary, HPP had no negative effects on the glucosinolate-myrosinase system in broccoli sprouts.

Optimization of anthocyanins extraction from black carrot pomace with thermosonication

A study was conducted to identify optimal ultrasound processing conditions (ultrasound energy density and temperature) to maximize the extraction of anthocyanin colorants from black carrot pomace. The treatment maximized the yield of five different anthocyanin compounds from black carrot pomace with cyanidin-3-xyloside-galactoside-glucoside-ferrulic acid (C3XGGF, 60.85-74.22mg/L) as the most abundant anthocyanin compound, followed by cyanidin-3-xyloside-galactoside (C3XG, 49.56-70.12mg/L). The response surface models predicted that if extraction conditions were conducted at 183.1J/g energy density and 50°C, the yield of various anthocyanin compounds would be maximized from the black carrot pomace. Response surface models were developed correlating anthocyanin yield with ultrasonication treatment parameters. The study showed the synergy of combining ultrasonication and temperature for the extraction of anthocyanin pigments from black carrot pomace. Results of the study also further demonstrate the potential of ultrasonication technology as a tool for the extraction of valuable components waste products from fruits and vegetables juice industry.

Effect of high pressure processing on dispersive and aggregative properties of almond milk

BACKGROUND

A study was conducted to investigate the impact of high pressure (450 and 600 MPa at 30 °C) and thermal (72, 85 and 99 °C at 0.1 MPa) treatments on dispersive and aggregative characteristics of almond milk. Experiments were conducted using a kinetic pressure testing unit and water bath. Particle size distribution, microstructure, UV absorption spectra, pH and color changes of processed and unprocessed samples were analyzed.

RESULTS

Raw almond milk represented the mono model particle size distribution with average particle diameters of 2 to 3 µm. Thermal or pressure treatment of almond milk shifted the particle size distribution towards right and increased particle size by five- to six-fold. Micrographs confirmed that both the treatments increased particle size due to aggregation of macromolecules. Pressure treatment produced relatively more and larger aggregates than those produced by heat treated samples. The apparent aggregation rate constant for 450 MPa and 600 MPa processed samples were k450MPa,30°C  = 0.0058 s(-1) and k600MPa,30°C  = 0.0095 s(-1) respectively.

CONCLUSIONS

This study showed that dispersive and aggregative properties of high pressure and heat-treated almond milk were different due to differences in protein denaturation, particles coagulation and aggregates morphological characteristics. Knowledge gained from the study will help food processors to formulate novel plant-based beverages treated with high pressure. © 2015 Society of Chemical Industry.

Inactivation of Geobacillus stearothermophilus spores in low-acid foods by pressure-assisted thermal processing

BACKGROUND

The effect of pressure-assisted thermal processing (PATP) on the inactivation of Geobacillus stearothermophilus spores was determined in deionized water, cooked ground beef, egg patty mince, whole milk and mashed potatoes at 105 °C under 500 and 700 MPa.

RESULTS

The numbers of G. stearothermophilus spores in deionized water and milk were reduced by more than 6 log CFU mL(-1) at 700 MPa and 105 °C, whereas those in cooked beef were reduced by 4.27 log CFU g(-1). The inactivation patterns of G. stearothermophilus spores in all food matrices followed nonlinear behavior, showing that Weibull model fitted well to the inactivation curves of G. stearothermophilus spores in low-acid foods.

CONCLUSION

The complex food matrices caused a protective effect on the inactivation of G. stearothermophilus spores during PATP. The results provide useful information in inactivation kinetics of bacterial spores for validating PATP-processed low-acid foods.

Screening foods for processing-resistant bacterial spores and characterization of a pressure- and heat-resistant Bacillus licheniformis isolate

This study was carried out to isolate pressure- and heat-resistant indicator spores from selected food matrices (black pepper, red pepper, garlic, and potato peel). Food samples were processed under various thermal (90 to 105°C) and pressure (700 MPa) combination conditions, and surviving microorganisms were isolated. An isolate from red pepper powder, Bacillus licheniformis, was highly resistant to pressure-thermal treatments. Spores of the isolate in deionized water were subjected to the combination treatments of pressure (0.1 to 700 MPa) and heat (90 to 121°C). Compared with the thermal treatment, the combined pressure-thermal treatments considerably reduced the numbers of B. licheniformis spores to less than 1.0 log CFU/g at 700 MPa plus 105°C and at 300 to 700 MPa plus 121°C. The inactivation kinetic parameters of the isolated B. licheniformis spores were estimated using linear and nonlinear models. Within the range of the experimental conditions tested, the pressure sensitivity (zP) of the spores decreased with increasing temperature (up to 121°C), and the temperature sensitivity (zT) was maximum at atmospheric pressure (0.1 MPa). These results will be useful for developing a combined pressure-thermal inactivation kinetics database for various bacterial spores.

Kinetics of Bacillus cereus spore inactivation in cooked rice by combined pressure-heat treatment

The efficacy of pressure-heat treatment was evaluated for the inactivation of Bacillus cereus spores in cooked rice. The spores of B. cereus ATCC 9818 were inoculated (1.1 × 10(8) CFU/g) in a parboiled rice product (pH 6.0, water activity of 0.95) and inactivated to an undetectable level (<10 CFU/g) by treatment of 600 MPa and process temperatures of 60 to 85 °C or 0.1 MPa and 85 °C. Kinetic inactivation parameters were estimated with linear and nonlinear models. The potential recovery of injured bacteria was also evaluated during storage of the treated product for 4 weeks at 4 and 25 °C. Depending on the process temperature, a 600-MPa treatment inactivated spores by 2.2 to 3.4 log during the 30-s pressure come-up time, and to below the detection limit after 4- to 8-min pressure-holding times. In contrast, a 180-min treatment time was required to inactivate the spores to an undetectable level at 0.1 MPa and 85 °C. The decimal reduction time of spores inactivated by combined pressure-heat treatment ranged from 1.08 to 2.36 min, while it was 34.6 min at 85 °C under atmospheric conditions. The nonlinear Weibull model scale factor increased, and was inversely related to the decimal reduction time, and the shape factor decreased with increasing pressure or temperature. The recovery of injured spores was influenced by the extent of pressure-holding time and process temperature. This study suggests that combined pressure-heat treatment could be used as a viable alternative to inactivate B. cereus spores in cooked rice and extend the shelf life of the product.

Grapefruit (Citrus paradisi Macfad) phytochemicals composition is modulated by household processing techniques

Grapefruits (Citrus paradisi Macfad) contain several phytochemicals known to have health maintaining properties. Due to the consumer's interest in obtaining high levels of these phytochemicals, it is important to understand the changes in their levels by common household processing techniques. Therefore, mature Texas "Rio Red" grapefruits were processed by some of the common household processing practices such as blending, juicing, and hand squeezing techniques and analyzed for their phytochemical content by high performance liquid chromatography (HPLC). Results suggest that grapefruit juice processed by blending had significantly (P < 0.05) higher levels of flavonoids (narirutin, naringin, hesperidin, neohesperidin, didymin, and poncirin) and limonin compared to juicing and hand squeezing. No significant variation in their content was noticed in the juice processed by juicing and hand squeezing. Ascorbic acid and citric acid were significantly (P < 0.05) higher in juice processed by juicing and blending, respectively. Furthermore, hand squeezed fruit juice had significantly higher contents of dihydroxybergamottin (DHB) than juice processed by juicing and blending. Bergamottin and 5-methoxy-7 gernoxycoumarin (5-M-7-GC) were significantly higher in blended juice compared to juicing and hand squeezing. Therefore, consuming grapefruit juice processed by blending may provide higher levels of health beneficial phytochemicals such as naringin, narirutin, and poncirin. In contrast, juice processed by hand squeezing and juicing provides lower levels of limonin, bergamottin, and 5-M-7-GC. These results suggest that, processing techniques significantly influence the levels of phytochemicals and blending is a better technique for obtaining higher levels of health beneficial phytochemicals from grapefruits. Practical Application:  Blending, squeezing, and juicing are common household processing techniques used for obtaining fresh grapefruit juice. Understanding the levels of health beneficial phytochemicals present in the juice processed by these techniques would enable the consumers to make a better choice to obtain high level of these compounds.

High-pressure effects on the microstructure, texture, and color of white-brined cheese

White-brined cheeses were subjected to high-pressure processing (HPP) at 50, 100, 200, and 400 MPa at 22 °C for 5 and 15 min and ripened in brine for 60 d. The effects of pressure treatment on the chemical, textural, microstructural, and color were determined. HPP did not affect moisture, protein, and fat contents of cheeses. Similar microstructures were obtained for unpressurized cheese and pressurized cheeses at 50 and 100 MPa, whereas a denser and continuous structure was obtained for pressurized cheeses at 200 and 400 MPa. These microstructural changes exhibited a good correlation with textural changes. The 200 and 400 MPa treatments resulted in significantly softer, less springy, less gummy, and less chewy cheese. Finally, marked differences were obtained in a* and b* values at higher pressure levels for longer pressure-holding time and were also supported by ΔE* values. The cheese became more greenish and yellowish with the increase in pressure level.

PRACTICAL APPLICATION

The quality of cheese is the very important to the consumers. This study documented the pressure-induced changes in selected quality attributes of semisoft and brine-salted cheese. The results can help the food processors to have knowledge of the process parameters resulting in quality changes and to identify optimal process parameters for preserving pressure-treated cheeses.

Influence of high-pressure processing on the profile of polyglutamyl 5-methyltetrahydrofolate in selected vegetables

In plants, folate occurs predominantly as 5-methyltetrahydrofolate (5MTHF) polyglutamyl forms. Differences in stability and bioavailability of food folate compared to synthetic folic acid have been attributed to the presence of the polyglutamyl chain. High-pressure processing (HPP) was tested for whether it might shorten polyglutamyl chains of 5MTHF species in fresh vegetables by enabling action of native γ-glutamylhydrolase (GGH). A validated ultrahigh-performance reversed-phase liquid chromatography-tandem mass spectrometry method using stable isotope as internal standard was applied for characterizing 5MTHF polyglutamyl profiles. HPP conditions included 300, 450, and 600 MPa at 30 °C for 0 or 5 min, and vegetables were vacuum-packed before treatment. Investigated vegetables included cauliflower (Brassica oleracea), baby carrots (Daucus carota), and carrot greens (D. carota). HPP treatment caused conversion of polyglutamyl 5MTHF species to short-chain and monoglutamyl forms. Maximal conversion of polyglutamyl folate to monoglutamyl folate occurred at the highest pressure/time combination investigated, 600 MPa/30 °C/5 min. Under this condition, cauliflower monoglutamyl folate increased nearly 4-fold, diglutamyl folate 32-fold, and triglutamyl folate 8-fold; carrot monoglutamyl increased 23-fold and diglutamyl 32-fold; and carrot greens monoglutamyl increased 2.5-fold and the diglutamyl form 19-fold. Although some folate degradation was observed at certain intermediate HPP conditions, total 5MTHF folate was largely preserved at 600 MPa/5 min. Thus, HPP of raw vegetables is a feasible strategy for enhancing vegetable monoglutamate 5MTHF.

Combined pressure-temperature effects on carotenoid retention and bioaccessibility in tomato juice

This study highlights the changes in lycopene and β-carotene retention in tomato juice subjected to combined pressure-temperature (P-T) treatments ((high-pressure processing (HPP; 500-700 MPa, 30 °C), pressure-assisted thermal processing (PATP; 500-700 MPa, 100 °C), and thermal processing (TP; 0.1 MPa, 100 °C)) for up to 10 min. Processing treatments utilized raw (untreated) and hot break (∼93 °C, 60 s) tomato juice as controls. Changes in bioaccessibility of these carotenoids as a result of processing were also studied. Microscopy was applied to better understand processing-induced microscopic changes. TP did not alter the lycopene content of the tomato juice. HPP and PATP treatments resulted in up to 12% increases in lycopene extractability. all-trans-β-Carotene showed significant degradation (p < 0.05) as a function of pressure, temperature, and time. Its retention in processed samples varied between 60 and 95% of levels originally present in the control. Regardless of the processing conditions used, <0.5% lycopene appeared in the form of micelles (<0.5% bioaccessibility). Electron microscopy images showed more prominent lycopene crystals in HPP and PATP processed juice than in thermally processed juice. However, lycopene crystals did appear to be enveloped regardless of the processing conditions used. The processed juice (HPP, PATP, TP) showed significantly higher (p < 0.05) all-trans-β-carotene micellarization as compared to the raw unprocessed juice (control). Interestingly, hot break juice subjected to combined P-T treatments showed 15-30% more all-trans-β-carotene micellarization than the raw juice subjected to combined P-T treatments. This study demonstrates that combined pressure-heat treatments increase lycopene extractability. However, the in vitro bioaccessibility of carotenoids was not significantly different among the treatments (TP, PATP, HPP) investigated.

Inactivation of Bacillus amyloliquefaciens spores by a combination of sucrose laurate and pressure-assisted thermal processing

The aim of this research was to study the effect of sucrose laurate ester (SL) on enhancing pressure-assisted thermal processing (PATP) inactivation of Bacillus amyloliquefaciens Fad 82 spores. B. amyloliquefaciens spores (∼10⁸ CFU/ml) were suspended in deionized water, solutions of 0.1, 0.5, and 1.0% SL, and mashed carrots without or with 1% SL. Samples were treated at 700 MPa and 105°C for 0 (come-up time), 1, 2, and 5 min and analyzed by pour-plating and most-probable-number techniques. Heat shock (80°C, 10 min) was applied to untreated and treated samples to study the germination rates. Results were also compared against samples treated by high pressure processing (700 MPa, 35°C) and thermal processing (105°C, 0.1 MPa). Among the combinations tested, SL at concentrations of 1.0% showed the best synergistic effect against spores of B. amyloliquefaciens when combined with PATP treatments. In the case of high pressure and thermal processing treatments, SL did not enhance spore inactivation at the conditions tested. These results suggest that SL is a promising antimicrobial compound that can help reduce the severity of PATP treatments.

Storage stability of lycopene in tomato juice subjected to combined pressure-heat treatments

A study was conducted to characterize the storage stability of lycopene in hot-break tomato juice prepared from two different cultivars and processed by various pressure-heat combinations. Samples were subjected to pressure assisted thermal processing (PATP; 600 MPa, 100 degrees C, 10 min), high pressure processing (HPP; 700 MPa, 45 degrees C, 10 min), and thermal processing (TP; 0.1 MPa, 100 degrees C, 35 min). Processed samples were stored at 4, 25, and 37 degrees C for upto 52 weeks. HPP and PATP treatments significantly improved the extractability of lycopene over TP and control. All-trans lycopene was found to be fairly stable to isomerization during processing, and the cis isomer content of the control and processed juice did not differ significantly. During storage, lycopene degradation varied as a function of the cultivar, processing method, storage temperature, and time. This study shows that combined pressure-temperature treatments could be an attractive alternative to thermal sterilization for preserving tomato juice quality.

Influence of pressurization rate and pressure pulsing on the inactivation of Bacillus amyloliquefaciens spores during pressure-assisted thermal processing

Pressure-assisted thermal processing (PATP) is an emerging sterilization technology in which a combination of pressure (500 to 700 MPa) and temperature (90 to 120 degrees C) are used to inactivate bacterial spores. The objective of this study was to examine the role of pressurization rate and pressure pulsing in enhancing PATP lethality to the bacterial spore. Bacillus amyloliquefaciens TMW 2.479 spore suspensions were prepared in deionized water at three inoculum levels (1.1 x 10(9), 1.4 x 10(8), and 1.3 x 10(6) CFU/ml), treated at two pressurization rates (18.06 and 3.75 MPa/s), and held at 600 MPa and 105 degrees C for 0, 0.5, 1, 2, 3, and 5 min. Experiments were carried out using custom-fabricated, high-pressure microbial kinetic testing equipment. Single and double pulses with equivalent pressure-holding times (1 to 3 min) were investigated by using the spore suspension containing 1.4 x 10(8) CFU/ml. Spore survivors were enumerated by pour plating, using Trypticase soy agar after incubation at 32 degrees C for 2 days. During short pressure-holding times (< or = 2 min), PATP treatment with the slow pressurization rate provided enhanced spore reduction over that of the fast pressurization rate. However, these differences diminished with extended pressure-holding times. After a 5-min pressure-holding time, B. amyloliquefaciens population decreased about 6 log CFU/ml, regardless of pressurization rate and inoculum level. Double-pulse treatment enhanced PATP spore lethality by approximately 2.4 to 4 log CFU/ml, in comparison to single pulse for a given pressure-holding time. In conclusion, pressure pulsing considerably increases the efficacy of PATP treatment against bacterial spores. Contribution of pressurization rate to PATP spore lethality varies with duration of pressure holding.

High-pressure processing of Turkish white cheese for microbial inactivation

High-pressure processing (HPP) of Turkish white cheese and reduction of Listeria monocytogenes, total Enterobacteriaceae, total aerobic mesophilic bacteria, total molds and yeasts, total Lactococcus spp., and total Lactobacillus spp. were investigated. Cheese samples were produced from raw milk and pasteurized milk and were inoculated with L. monocytogenes after brining. Both inoculated (ca. 10(7) to 10(8) CFU/g) and noninoculated samples were subjected to HPP in a high-pressure food processor at 50 to 600 MPa for 5 and 10 min at 25 degrees C. Reductions in L. monocytogenes, total aerobic mesophilic bacteria, Lactococcus spp., and Lactobacillus spp. in both pasteurized- and raw-milk cheese samples and reductions in total molds and yeasts and total Enterobacteriaceae counts in raw-milk cheese samples increased with increased pressure (P < or = 0.05). The maximum reduction of the L. monocytogenes count, ca. 4.9 log CFU/g, was obtained at 600 MPa. Because of the highly inhibitory effect of pasteurization, the total molds and yeasts and total Enterobacteriaceae counts for the cheese samples produced from pasteurized milk were below the detection limit both before and after HPP. There was no significant difference in inactivation of L. monocytogenes, total aerobic mesophilic bacteria, Lactococcus spp., and Lactobacillus spp. under the same treatment conditions for the raw milk and pasteurized milk cheeses and for 5- and 10-min treatment times (P > 0.05). No significant change was detected in pH or water activity of the samples before and after HPP. Our findings suggest that HPP can be used effectively to reduce the microbial load in Turkish white cheese.

Monitoring biochemical changes in bacterial spore during thermal and pressure-assisted thermal processing using FT-IR spectroscopy

Pressure-assisted thermal processing (PATP) is being widely investigated for processing low acid foods. However, its microbial safety has not been well established and the mechanism of inactivation of pathogens and spores is not well understood. Fourier transform infrared (FT-IR) spectroscopy was used to study some of the biochemical changes in bacterial spores occurring during PATP and thermal processing (TP). Spore suspensions (approximately 10(9) CFU/mL of water) of Clostridium tyrobutyricum, Bacillus sphaericus, and three strains of Bacillus amyloliquefaciens were treated by PATP (121 degrees C and 700 MPa) for 0, 10, 20, and 30 s and TP (121 degrees C) for 0, 10, 20, and 30 s. Treated and untreated spore suspensions were analyzed using FT-IR in the mid-infrared region (4000-800 cm(-1)). Multivariate classification models based on soft independent modeling of class analogy (SIMCA) were developed using second derivative-transformed spectra. The spores could be differentiated up to the strain level due to differences in their biochemical composition, especially dipicolinic acid (DPA) and secondary structure of proteins. During PATP changes in alpha-helix and beta-sheets of secondary protein were evident in the spectral regions 1655 and 1626 cm(-1), respectively. Infrared absorption bands from DPA (1281, 1378, 1440, and 1568 cm(-1)) decreased significantly during the initial stages of PATP, indicating release of DPA. During TP changes were evident in the bands associated with secondary proteins. DPA bands showed little or no change during TP. A correlation was found between the spore's Ca-DPA content and its resistance to PATP. FT-IR spectroscopy could classify different strains of bacterial spores and determine some of the changes occurring during spore inactivation by PATP and TP. Furthermore, this technique shows great promise for rapid screening PATP-resistant bacterial spores.

Effects of inoculum level and pressure pulse on the inactivation of Clostridium sporogenes spores by pressure-assisted thermal processing

The effects of initial concentration and pulsed pressurization on the inactivation of Clostridium sporogenes spores suspended in deionized water were determined during thermal processing (TP; 105 degrees C, 0.1 MPa) and pressure-assisted thermal processing (PATP; 105 degrees C and 700 MPa) treatments for 40 min and 5 min holding times, respectively. Different inoculum levels (10(4), 10(6), and 10(8) CFU/ml) of C. sporogenes spores suspended in deionized water were treated at 105 degrees C under 700 MPa with single, double, and triple pulses. Thermally treated samples served as control. No statistical significances (p > 0.05) were observed among all different inoculum levels during the thermal treatment, whereas the inactivation rates (k1 and k2) were decreased with increasing the initial concentrations of C. sporogenes spores during the PATP treatments. Double- and triple-pulsed pressurization reduced more effectively the number of C. sporogenes spores than single-pulse pressurization. The study shows that the spore clumps formed during the PATP may lead to an increase in pressure-thermal resistance, and multiple-pulsed pressurization can be more effective in inactivating bacterial spores. The results provide an interesting insight on the spore inactivation mechanisms with regard to inoculum level and pulsed pressurization.

Physiological responses of Bacillus amyloliquefaciens spores to high pressure

Pressure inactivation behavior of Bacillus amyloliquefaciens spores was investigated in deionized water. The spores of B. amyloliquefaciens were subjected to 105 degrees C and 700 MPa. The magnitude of the decrease in viability after pressure treatment was similar to that after pressure treatment followed by heat shock. The increase of dipicolinic acid (DPA) release was correlated with the spore inactivation, and the hydrophobicity did not significantly change during the pressure-assisted thermal processing (PATP). Lag phase duration increased with increasing pressure process time. The mechanisms of spore germination and inactivation during the PATP were related to a complex physiological process.

Inactivation kinetics of selected aerobic and anaerobic bacterial spores by pressure-assisted thermal processing

The combined pressure-thermal inactivation kinetics of spores from three strains of anaerobic (Clostridium sporogenes, C. tyrobutylicum, and Thermoanaerobacterium thermosaccharolyticum), and six strains of aerobic (Bacillus amyloliquefaciens and B. sphaericus) bacteria were studied. Spores of these bacteria were prepared in deionized water and treated in a custom-made kinetic tester over various pressure (0.1 and 700 MPa) and thermal (105 and 121 degrees C) combinations. Survivor data were modeled using log-linear and Weibull models to obtain relevant kinetic parameters. In comparison to thermal treatment alone, the combined pressure-thermal conditions accelerated the inactivation of the spores tested. A measurable fraction of spore populations was inactivated during the pressure come-up time. Pressure-assisted thermal processing (PATP) at 700 MPa and 121 degrees C for 1 min inactivated up to 7-8 log for some of spores tested. Among bacteria evaluated, based on survivor curve data T. thermosaccharolyticum, B. amyloliquefaciens Fad 82, and Fad 11/2 were found to produce the most PATP-resistant spores. PATP inactivation plots showed characteristic upward curvature, which is indicative of the tailing behavior. Since both log-linear and Weibull kinetic models did not consider microbial reduction during process come-up time, our results demonstrated that the estimated model parameters were not adequate to compare combined pressure-thermal resistance of various bacterial spores tested.

Opportunities and Challenges in High Pressure Processing of Foods

Consumers increasingly demand convenience foods of the highest quality in terms of natural flavor and taste, and which are free from additives and preservatives. This demand has triggered the need for the development of a number of nonthermal approaches to food processing, of which high-pressure technology has proven to be very valuable. A number of recent publications have demonstrated novel and diverse uses of this technology. Its novel features, which include destruction of microorganisms at room temperature or lower, have made the technology commercially attractive. Enzymes and even spore forming bacteria can be inactivated by the application of pressure-thermal combinations, This review aims to identify the opportunities and challenges associated with this technology. In addition to discussing the effects of high pressure on food components, this review covers the combined effects of high pressure processing with: gamma irradiation, alternating current, ultrasound, and carbon dioxide or anti-microbial treatment. Further, the applications of this technology in various sectors - fruits and vegetables, dairy, and meat processing - have been dealt with extensively. The integration of high-pressure with other matured processing operations such as blanching, dehydration, osmotic dehydration, rehydration, frying, freezing / thawing and solid-liquid extraction has been shown to open up new processing options. The key challenges identified include: heat transfer problems and resulting non-uniformity in processing, obtaining reliable and reproducible data for process validation, lack of detailed knowledge about the interaction between high pressure, and a number of food constituents, packaging and statutory issues.

Determination of spore inactivation during thermal and pressure-assisted thermal processing using FT-IR spectroscopy

The efficacy of microbial inactivation techniques is currently tested using time-consuming and labor-intensive plate count methods, which are the principal rate-limiting steps in developing inactivation kinetic parameters for alternative food processing technologies. Fourier transform infrared (FT-IR) spectroscopy combined with multivariate analysis was used to quantify viable spores and identify some biochemical changes in samples treated by autoclaving, pressure-assisted thermal processing (PATP), and thermal processing (TP). Spore suspensions ( approximately 109 CFU/mL) of Bacillus amyloliquefaciens TMW 2.479 Fad 82, B. amyloliquefaciens TMW 2.482 Fad 11/2, B. sphaericus NZ 14, B. amyloliquefaciens ATCC 49764, and Clostridium tyrobutyricum ATCC 25755 were treated by PATP (121 degrees C and 700 MPa) for 0, 10, 20, and 30 s and by TP (121 degrees C) for 0, 10, 20, and 30 s. The concentrations of spores in treated samples were determined by plating (reference method). Models developed using partial least-squares regression (PLSR) for predicting spore levels in treated samples had correlation coefficients (r) of >0.99 and standard errors of cross-validation ranging between 100.2 and 100.5 CFU/mL. Changes in dipicolinic acid (DPA) and secondary structure of proteins were found to occur during inactivation of spores by PATP and TP. FT-IR spectroscopy could rapidly estimate viable bacterial spore levels in PATP- and TP-treated spore suspensions, providing an accurate analytical tool for monitoring the efficacy of sterilization techniques in inactivating spore-forming microorganisms.

Combined pressure-thermal inactivation kinetics of Bacillus amyloliquefaciens spores in egg patty mince

Bacillus amyloliquefaciens is a potential surrogate for Clostridium botulinum in validation studies involving bacterial spore inactivation by pressure-assisted thermal processing. Spores of B. amyloliquefaciens Fad 82 were inoculated into egg patty mince (approximately 1.4 x 10(8) spores per g), and the product was treated with combinations of pressure (0.1 to 700 MPa) and heat (95 to 121 degrees C) in a custom-made high-pressure kinetic tester. The values for the inactivation kinetic parameter (D), temperature coefficient (zT), and pressure coefficient (zP) were determined with a linear model. Inactivation parameters from the nonlinear Weibull model also were estimated. An increase in process pressure decreased the D-value at 95, 105, and 110 degrees C; however, at 121 degrees C the contribution of pressure to spore lethality was less pronounced. The zP-value increased from 170 MPa at 95 degrees C to 332 MPa at 121 degrees C, suggesting that B. amyloliquefaciens spores became less sensitive to pressure changes at higher temperatures. Similarly, the zT-value increased from 8.2 degrees C at 0.1 MPa to 26.8 degrees C at 700 MPa, indicating that at elevated pressures, the spores were less sensitive to changes in temperature. The nonlinear Weibull model parameter b increased with increasing pressure or temperature and was inversely related to the D-value. Pressure-assisted thermal processing is a potential alternative to thermal processing for producing shelf-stable egg products.

Comparison of effects of high-pressure processing and heat treatment on immunoactivity of bovine milk immunoglobulin G in enriched soymilk under equivalent microbial inactivation levels

Immunoglobulin-rich foods may provide health benefits to consumers. To extend the refrigerated shelf life of functional foods enriched with bovine immunoglobulin G (IgG), nonthermal alternatives such as high-pressure processing (HPP) may offer advantages to thermal processing for microbial reduction. To evaluate the effects of HPP on the immunoactivity of bovine IgG, a soymilk product enriched with milk protein concentrates, derived from dairy cows that were hyperimmunized with 26 human pathogens, was subjected to HPP or heat treatment. To achieve a 5 log reduction in inoculated Escherichia coli 8739, the HPP or heat treatment requirements were 345 MPa for 4 min at 30 degrees C or for 20 s at 70 degrees C, respectively. To achieve a 5 log reduction in natural flora in the enriched soymilk, the HPP or heat treatments needed were 552 MPa for 4 min at 30 degrees C or for 120 s at 78.2 degrees C, respectively. At equivalent levels for a 5 log reduction in E. coli, HPP and heat treatment caused 25% and no detectable loss in bovine IgG activity, respectively. However, at equivalent levels for a 5 log reduction in natural flora, HPP and heat resulted in 65 and 85% loss of bovine IgG activity, respectively. Results of combined pressure-thermal kinetic studies of bovine milk IgG activity were provided to determine the optimal process conditions to preserve product function.