Steatosis Quantification on Ultrasound Images by a Deep Learning Algorithm on Patients Undergoing Weight Changes

INTRODUCTION

A deep learning algorithm to quantify steatosis from ultrasound images may change a subjective diagnosis to objective quantification. We evaluate this algorithm in patients with weight changes.

MATERIALS AND METHODS

Patients (N = 101) who experienced weight changes ≥ 5% were selected for the study, using serial ultrasound studies retrospectively collected from 2013 to 2021. After applying our exclusion criteria, 74 patients from 239 studies were included. We classified images into four scanning views and applied the algorithm. Mean values from 3-5 images in each group were used for the results and correlated against weight changes.

RESULTS

Images from the left lobe (G1) in 45 patients, right intercostal view (G2) in 67 patients, and subcostal view (G4) in 46 patients were collected. In a head-to-head comparison, G1 versus G2 or G2 versus G4 views showed identical steatosis scores (R2 > 0.86, p < 0.001). The body weight and steatosis scores were significantly correlated (R2 = 0.62, p < 0.001). Significant differences in steatosis scores between the highest and lowest body weight timepoints were found (p < 0.001). Men showed a higher liver steatosis/BMI ratio than women (p = 0.026).

CONCLUSIONS

The best scanning conditions are 3-5 images from the right intercostal view. The algorithm objectively quantified liver steatosis, which correlated with body weight changes and gender.

Investigating the Mechanical Properties of Annealed 3D-Printed PLA-Date Pits Composite

Biomedical applications are crucial in rehabilitation medicine, assisting individuals with disabilities. Nevertheless, materials failure can sometimes result in inconvenience for users. Polylactic Acid (PLA) is a popular 3D-printed material that offers design flexibility. However, it is limited in use because its mechanical properties are inadequate. Thus, this study introduces an artificial intelligence model that utilizes ANFIS to estimate the mechanical properties of PLA composites. The model was developed based on an actual data set collected from experiments. The experimental results were obtained by preparing samples of PLA green composites with different weight fractions of date pits, which were then annealed for varying durations to remove residual stresses resulting from 3D printing. The mechanical characteristics of the produced PLA composite specimens were measured experimentally, while the ANSYS model was established to identify the composites' load-carrying capacity. The results showed that ANFIS models are exceptionally robust and compatible and possess good predictive capabilities for estimating the hardness, strength, and Young's modulus of the 3D-printed PLA composites. The model results and experimental outcomes were nearly identical.

Anomaly Detection in Fused Filament Fabrication Using Machine Learning

Fused filament fabrication (FFF) has been widely used in various industries, and the adoption of technology is growing significantly. However, the FFF process has several disadvantages like inconsistent part quality and print repeatability. The occurrence of manufacturing-induced defects often leads to these shortcomings. This study aims to develop and implement an on-site monitoring system, which consists of a camera attached to the print head and the laptop that processes the video feed, for the extrusion-based 3D printers incorporating computer vision and object detection models to detect defects and make corrections in real-time. Image data from two classes of defects were collected to train the model. Various YOLO architectures were evaluated to study the ability to detect and classify printing anomalies such as under-extrusion and over-extrusion. Four of the trained models, YOLOv3 and YOLOv4 with "Tiny" variation, achieved a mean average precision score of >80% using the AP50 metric. Subsequently, two of the models (YOLOv3-Tiny 100 and 300 epochs) were optimized using Open Neural Network Exchange (ONNX) model conversion and ONNX Runtime to improve the inference speed. A classification accuracy rate of 89.8% and an inference speed of 70 frames per second were obtained. Before implementing the on-site monitoring system, a correction algorithm was developed to perform simple corrective actions based on defect classification. The G-codes of the corrective actions were sent to the printers during the printing process. This implementation successfully demonstrated real-time monitoring and autonomous correction during the FFF 3D printing process. This implementation will pave the way for an on-site monitoring and correction system through closed-loop feedback from other additive manufacturing (AM) processes.

Use of Mobile Technology to Identify Behavioral Mechanisms Linked to Mental Health Outcomes in Kenya: Protocol for Development and Validation of a Predictive Model

Objective: This study proposes to identify and validate weighted sensor stream signatures that predict near-term risk of a major depressive episode and future mood among healthcare workers in Kenya. Approach: The study will deploy a mobile app platform and use novel data science analytic approaches (Artificial Intelligence and Machine Learning) to identifying predictors of mental health disorders among 500 randomly sampled healthcare workers from five healthcare facilities in Nairobi, Kenya. Expectation: This study will lay the basis for creating agile and scalable systems for rapid diagnostics that could inform precise interventions for mitigating depression and ensure a healthy, resilient healthcare workforce to develop sustainable economic growth in Kenya, East Africa, and ultimately neighboring countries in sub-Saharan Africa. This protocol paper provides an opportunity to share the planned study implementation methods and approaches. Conclusion : A mobile technology platform that is scalable and can be used to understand and improve mental health outcomes is of critical importance.

Lung Cancer Recurrence Risk Prediction through Integrated Deep Learning Evaluation

Background: Prognostic risk factors for completely resected stage IA non-small-cell lung cancers (NSCLCs) have advanced minimally over recent decades. Although several biomarkers have been found to be associated with cancer recurrence, their added value to TNM staging and tumor grade are unclear. Methods: Features of preoperative low-dose CT image and histologic findings of hematoxylin- and eosin-stained tissue sections of resected lung tumor specimens were extracted from 182 stage IA NSCLC patients in the National Lung Screening Trial. These features were combined to predict the risk of tumor recurrence or progression through integrated deep learning evaluation (IDLE). Added values of IDLE to TNM staging and tumor grade in progression risk prediction and risk stratification were evaluated. Results: The 5-year AUC of IDLE was 0.817 ± 0.037 as compared to the AUC = 0.561 ± 0.042 and 0.573 ± 0.044 from the TNM stage and tumor grade, respectively. The IDLE score was significantly associated with cancer recurrence (p < 0.0001) even after adjusting for TNM staging and tumor grade. Synergy between chest CT image markers and histological markers was the driving force of the deep learning algorithm to produce a stronger prognostic predictor. Conclusions: Integrating markers from preoperative CT images and pathologist’s readings of resected lung specimens through deep learning can improve risk stratification of stage 1A NSCLC patients over TNM staging and tumor grade alone. Our study suggests that combining markers from nonoverlapping platforms can increase the cancer risk prediction accuracy.

Towards the Estimation of Body Weight in Sheep Using Metaheuristic Algorithms from Biometric Parameters in Microsystems

The Body Weight (BW) of sheep is an important indicator for producers. Genetic management, nutrition, and health activities can benefit from weight monitoring. This article presents a polynomial model with an adjustable degree for estimating the weight of sheep from the biometric parameters of the animal. Computer vision tools were used to measure these parameters, obtaining a margin of error of less than 5%. A polynomial model is proposed after the parameters were obtained, where a coefficient and an unknown exponent go with each biometric variable. Two metaheuristic algorithms determine the values of these constants. The first is the most extended algorithm, the Genetic Algorithm (GA). Subsequently, the Cuckoo Search Algorithm (CSA) has a similar performance to the GA, which indicates that the value obtained by the GA is not a local optimum due to the poor parameter selection in the GA. The results show a Root-Mean-Squared Error (RMSE) of 7.68% for the GA and an RMSE of 7.55% for the CSA, proving the feasibility of the mathematical model for estimating the weight from biometric parameters. The proposed mathematical model, as well as the estimation of the biometric parameters can be easily adapted to an embedded microsystem.

Industry 4.0: A Proposal of Paradigm Organization Schemes from a Systematic Literature Review

Currently, the concept of Industry 4.0 is well known; however, it is extremely complex, as it is constantly evolving and innovating. It includes the participation of many disciplines and areas of knowledge as well as the integration of many technologies, both mature and emerging, but working in collaboration and relying on their study and implementation under the novel criteria of Cyber-Physical Systems. This study starts with an exhaustive search for updated scientific information of which a bibliometric analysis is carried out with results presented in different tables and graphs. Subsequently, based on the qualitative analysis of the references, we present two proposals for the schematic analysis of Industry 4.0 that will help academia and companies to support digital transformation studies. The results will allow us to perform a simple alternative analysis of Industry 4.0 to understand the functions and scope of the integrating technologies to achieve a better collaboration of each area of knowledge and each professional, considering the potential and limitations of each one, supporting the planning of an appropriate strategy, especially in the management of human resources, for the successful execution of the digital transformation of the industry.

Intelligent Spacecraft Visual GNC Architecture With the State-Of-the-Art AI Components for On-Orbit Manipulation

Conventional spacecraft Guidance, Navigation, and Control (GNC) architectures have been designed to receive and execute commands from ground control with minimal automation and autonomy onboard spacecraft. In contrast, Artificial Intelligence (AI)-based systems can allow real-time decision-making by considering system information that is difficult to model and incorporate in the conventional decision-making process involving ground control or human operators. With growing interests in on-orbit services with manipulation, the conventional GNC faces numerous challenges in adapting to a wide range of possible scenarios, such as removing unknown debris, potentially addressed using emerging AI-enabled robotic technologies. However, a complete paradigm shift may need years' efforts. As an intermediate solution, we introduce a novel visual GNC system with two state-of-the-art AI modules to replace the corresponding functions in the conventional GNC system for on-orbit manipulation. The AI components are as follows: (i) A Deep Learning (DL)-based pose estimation algorithm that can estimate a target's pose from two-dimensional images using a pre-trained neural network without requiring any prior information on the dynamics or state of the target. (ii) A technique for modeling and controlling space robot manipulator trajectories using probabilistic modeling and reproduction to previously unseen situations to avoid complex trajectory optimizations on board. This also minimizes the attitude disturbances of spacecraft induced on it due to the motion of the robot arm. This architecture uses a centralized camera network as the main sensor, and the trajectory learning module of the 7 degrees of freedom robotic arm is integrated into the GNC system. The intelligent visual GNC system is demonstrated by simulation of a conceptual mission-AISAT. The mission is a micro-satellite to carry out on-orbit manipulation around a non-cooperative CubeSat. The simulation shows how the GNC system works in discrete-time simulation with the control and trajectory planning are generated in Matlab/Simulink. The physics rendering engine, Eevee, renders the whole simulation to provide a graphic realism for the DL pose estimation. In the end, the testbeds developed to evaluate and demonstrate the GNC system are also introduced. The novel intelligent GNC system can be a stepping stone toward future fully autonomous orbital robot systems.

Artificial Intelligence and Machine Learning to Predict Student Performance during the COVID-19

Artificial intelligence is based on algorithms that enable machines to make decisions instead of humans. This technology improves user experiences in a variety of areas. In this paper we discuss an intelligent solution to predict the performance of Moroccan students in the region of Guelmim Oued Noun through a recommendation system using artificial intelligence techniques during the COVID-19.

Evaluation of an artificial intelligent hydrocephalus diagnosis model based on transfer learning

To design and develop artificial intelligence (AI) hydrocephalus (HYC) imaging diagnostic model using a transfer learning algorithm and evaluate its application in the diagnosis of HYC by non-contrast material-enhanced head computed tomographic (CT) images.A training and validation dataset of non-contrast material-enhanced head CT examinations that comprised of 1000 patients with HYC and 1000 normal people with no HYC accumulating to 28,500 images. Images were pre-processed, and the feature variables were labeled. The feature variables were extracted by the neural network for transfer learning. AI algorithm performance was tested on a separate dataset containing 250 examinations of HYC and 250 of normal. Resident, attending and consultant in the department of radiology were also tested with the test sets, their results were compared with the AI model.Final model performance for HYC showed 93.6% sensitivity (95% confidence interval: 77%, 97%) and 94.4% specificity (95% confidence interval: 79%, 98%), with area under the characteristic curve of 0.93. Accuracy rate of model, resident, attending, and consultant were 94.0%, 93.4%, 95.6%, and 97.0%.AI can effectively identify the characteristics of HYC from CT images of the brain and automatically analyze the images. In the future, AI can provide auxiliary diagnosis of image results and reduce the burden on junior doctors.