N/S Co-Doped Graphene Aerogels as Superior Anode Materials for High-Rate Lithium-Ion Batteries

The nitrogen and sulfur co-doped graphene aerogel (SNGA) was synthesized by a one-pot hydrothermal route using graphene oxide as the starting material and thiourea as the S and N source. The obtained SNGA with a three-dimensionally hierarchical structure, providing more available pathways for the transport of lithium ions. The existing form of S and N was regulated by changing the calcination temperature and thiourea doping amount. The results revealed that high temperature could decompose -SOX- functional groups and promote the transformation of C-S-C to C-S, ensuring the cyclic stability of electrode materials, and increasing the thiourea dosage amount introduced more pyridine nitrogen, improving the multiplicative performance of electrode materials. Benefiting from the synergistic effect of sulfur and nitrogen atoms, the prepared SNGA showed superior rate capability (107.8 mAh g-1 at 5 A g-1), twice more than that of GA (52.8 mAh g-1), and excellent stability (232.1 mAh g-1 at 1 A g-1 after 300 cycles), 1.85 times more than that of GA (125.6 mAh g-1). The present study provides a detailed report on thiourea as a dopant to provide a sufficient basis for SNGA and a theoretical guide for further modifying.

Enhancing Electrochemical Performance of Aluminum-Oxygen Batteries with Graphene Aerogel Cathode

Aluminum-oxygen batteries (AOBs) own the benefits of high energy density (8.14 kWh kg-1 ), low cost, and high safety. However, the design of a cathode with high surface area, structure integrity, and good catalytic performance is still challenging for rechargeable AOBs. Herein, the fabrication of a robust self-supporting cathode using 3D graphene aerogel (3DGA) for rechargeable AOBs is demonstrated. Electroanalysis showed that the 3DGA presented good catalytic activity in both oxygen reduction and evolution reactions, which allowed the AOB to operate for >90 cycles with low overpotentials at a current density of 0.2 mA cm-2 , and a high Coulombic efficiency of ca. 99% using ionic liquid as electrolyte. In comparison, the cell with the carbon paper cathode can only cycle for 50 rounds. The excellent cyclic performance can be attributed to the porous structure, large surface area, good electric conductivity, and catalytic activity of the 3DGA, which is prospective to be applied for other metal-air batteries, fuel cells, and supercapacitors.

Progress in Research on the Preparation of Graphene-Based Aerogels Using γ-ray Irradiation Technology

Graphene aerogels (GAs) are of significant interest in the scientific community due to their unique attributes, including a three-dimensional porous structure, exceptional specific surface area, and remarkable chemical stability. Researchers have made notable breakthroughs in aerogel preparation, focusing on aspects like porous structures and chemical stability. This review explores product morphologies and properties developed between 2011 and 2023, particularly examining applications of graphene aerogels with amine or alcohol radical scavengers. It offers a roadmap for researchers, suggesting possibilities for radiation-based preparation and indicating broader applications. These findings contribute to a deeper understanding of aerogels and expand the potential applications of graphene aerogels across various fields.

A Review of Graphene-Based Materials/Polymer Composite Aerogels

The fabrication of composite materials is an effective way to improve the performance of a single material and expand its application range. In recent years, graphene-based materials/polymer composite aerogels have become a hot research field for preparing high-performance composites due to their special synergistic effects in mechanical and functional properties. In this paper, the preparation methods, structures, interactions, properties, and applications of graphene-based materials/polymer composite aerogels are discussed, and their development trend is projected. This paper aims to arouse extensive research interests in multidisciplinary fields and provide guidance for the rational design of advanced aerogel materials, which could then encourage efforts to use these new kinds of advanced materials in basic research and commercial applications.

Sulfur-Doped rGO Aerogel Enables the Anchoring of 1T/2H MoS2 for Durable Oxygen Reduction Reaction Catalyst Support

Durability is crucial for the long-term application of cathode oxygen reduction reaction (ORR) catalysts in fuel cells. In this work, sulfur was successfully doped into reduced graphene oxide (rGO) aerogels to achieve the formation of 1T/2H hybrid phase MoS₂ , obtaining MoS₂ @S-rGO-300 composite ORR catalyst support. After loading ultrafine Pt nanoparticles, Pt/MoS₂ @S-rGO-300 showed not only an enhanced ORR activity, but also a significantly improved stability after 10000 cycles. The mass activity retention for Pt/MoS₂ @S-rGO-300 after cycles reached 89.94 %, while that of Pt/rGO was only 37.44 %. Density functional theory calculations revealed that the enlarged binding energy between Pt atoms and MoS₂ @S-rGO-300 led to the prevention of Pt agglomeration as well as Ostwald ripening.

Sustainable-Macromolecule-Assisted Preparation of Cross-linked, Ultralight, Flexible Graphene Aerogel Sensors toward Low-Frequency Strain/Pressure to High-Frequency Vibration Sensing

Ultralight and highly flexible aerogel sensors, composed of reduced graphene oxide cross-linked by sustainable-macromolecule-derived carbon, are prepared via facile freeze-drying and thermal annealing. The synergistic combination of cross-linked graphene nanosheets and micrometer-sized honeycomb pores gives rise to the exceptional properties of the aerogels, including superior compressibility and resilience, good mechanical strength and durability, satisfactory fire-resistance, and outstanding electromechanical sensing performances. The corresponding aerogel sensors, operated at an ultralow voltage of 0.2 V, can efficiently respond to a wide range of strains (0.1-80%) and pressures (13-2750 Pa) even at temperatures beyond 300 °C. Moreover, the ultrahigh-pressure sensitivity of 10 kPa^-1 and excellent sensing stability and durability are accomplished. Strikingly, the aerogel sensors can also sense the vibration signals with ultrahigh frequencies of up to 4000 Hz for >1 000 000 cycles, significantly outperforming those of other sensors. These enable successful demonstration of the exceptional performance of the cross-linked graphene-based biomimetic aerogels for sensitive monitoring of mechanical signals, e.g., acting as wearable devices for monitoring human motions, and for nondestructive monitoring of cracks on engineering structures, showing the great potential of the aerogel sensors as next-generation electronics.

Synergistic Regulation of the Microstructure for Multifunctional Graphene Aerogels by a Dual Template Method

The performance of graphene aerogels (GAs) is based on the microstructure. However, GAs face a challenge of simultaneously controlling the size and alignment of pores strategically. Herein, we initially proposed a simple strategy to construct GAs with an adjustable structure based on the emulsion and ice dual template methods. Specifically, GAs with a honeycomb structure prepared by conventional freezing (CGAs) exhibited a high specific surface of 176 m²/g, superelasticity with a compressive strain of 95%, isotropic compression and thermal insulation performances, as well as an excellent absorption capacity of 150-550 g/g. Instead, the GAs with a bamboo-like network frozen by unidirectional freezing (UGAs) showed anisotropy in compression and thermal insulation behavior. Furthermore, UGAs exhibited incredible special stress (7.9 kPa cm³/mg) along the axial direction twice than that of the radial direction. Meanwhile, the apparent temperature of UGAs was only 45.6 °C when placed on a 120 °C hot stage along the radial direction. Remarkably, the properties of CGAs and UGAs were significantly improved with the adjustment of the microstructure.

Engineering Catalytic CoSe-ZnSe Heterojunctions Anchored on Graphene Aerogels for Bidirectional Sulfur Conversion Reactions

Sluggish sulfur reduction and lithium sulfide (Li2 S) oxidation prevent the widespread use of lithium-sulfur (Li-S) batteries, which are attractive alternatives to Li-ion batteries. The authors propose that a transition metal selenide heterojunction (CoSe-ZnSe) catalytically accelerates bidirectional sulfur conversion reactions. A combination of synchrotron X-ray absorption spectroscopy and density functional theory calculations show that a highly active heterointerface with charge redistribution and structure distortion effectively immobilizes sulfur species, facilitates Li ion diffusion, and decreases the sulfur reduction and Li2 S oxidation energy barriers. The CoSe-ZnSe catalytic cathode exhibits high areal capacities, good rate capability, and superior cycling stability with capacity fading rate of 0.027% per cycle over 1700 cycles. Furthermore, CoSe-ZnSe heterojunctions anchored on graphene aerogels (CoSe-ZnSe@G) enhance ionic transport and catalytic activity under high sulfur loading and lean electrolyte conditions. A high areal capacity of 8.0 mAh cm-2 is achieved at an electrolyte/sulfur ratio of 3 µL mg-1 . This study demonstrates the importance of bidirectional catalytic heterojunctions and structure engineering in boosting Li-S battery performances.

Design of Intrinsically Flame-Retardant Vanillin-Based Epoxy Resin for Thermal-Conductive Epoxy/Graphene Aerogel Composites

Vanillin, as a lignin-derived mono-aromatic compound, has attracted increasing attention due to its special role as an intermediate for the synthesis of different biobased polymers. Herein, intrinsically flame-retardant and thermal-conductive vanillin-based epoxy/graphene aerogel (GA) composites were designed. First, a bifunctional phenol intermediate (DN-bp) was synthesized by coupling vanillin with 4, 4'-diaminodiphenylmethane and DOPO, and the epoxy monomer (MEP) was obtained by the epoxidation reaction with DN-bp and epichlorohydrin. Then, various amounts of MEP and diglycidyl ether of bisphenol A (DER) were mixed and cured. Interestingly, the flexural strength and modulus were greatly enhanced from 72.8 MPa and 1.3 GPa to 90.3 MPa and 2.8 GPa, respectively, at 30 wt % MEP, due to the rigidity of MEP and strong intermolecular N-H hydrogen bonding interactions. Meanwhile, the cured epoxy achieved a UL-94 V0 rating with a low P content of 1.06%. The flame-retardant vanillin-based epoxy was then impregnated into the thermal conductive 3D GA networks. The obtained epoxy/graphene composite showed excellent flame retardancy and thermal conductivity [λ = 0.592 W/(m·K)] with only 0.5 wt % graphene in the system. Based on these results, we believe that this work would represent a novel solution for the preparation of high-performance biobased flame-retardant multipurpose epoxies.

Ultralight-Weight Graphene Aerogels with Extremely High Electrical Conductivity

The integration of 2D graphene sheets into a porous and macroscopic structure is extremely attractive for application in several electrochemical fields. In this regard, for the first time, the synthesis of 3D graphene aerogels is reported by using a rapid, easy, cost-effective, and scalable at industrial level methodology. These aerogels integrate the intrinsic properties of graphene with a high pore volume. To achieve this ultraporous graphene network, resorcinol/formaldehyde polymer with controllable porosity is employed as a binder and a cross-linker material, and a graphene oxide solution provides the graphene building blocks. Two series of materials with and without catalyst for resorcinol/formaldehyde reaction and with different synthesis conditions and graphene contents are studied. The resulting graphene aerogels present low density, large macroporosity, and electrical conductivity values as high as 852 S m^-1 , with 97.58% of porosity, which is the highest value of electrical conductivity reported so far in the literature for ultralight-weight graphene aerogels.

Lightweight, Fire-Retardant, and Anti-Compressed Honeycombed-Like Carbon Aerogels for Thermal Management and High-Efficiency Electromagnetic Absorbing Properties

Ordered porous carbon materials (PCMs) have potential applications in various fields due to their low mass densities and porous features. However, it yet remains extremely challenging to construct PCMs with multifunctionalization for electromagnetic wave absorption. Herein, the honeycombed-like carbon aerogels with embedded Co@C nanoparticles are fabricated by a directionally freeze-casting and carbonization method. The optimized aerogel possesses low density (0.017 g cm^-3 ), fire-retardant, robust mechanical performance (compression moduli reach 1411 and 420 kPa in the longitudinal and transverse directions at 80% strain, respectively), and high thermal management (high thermal insulation capability and high-efficiency electrothermal conversion ability). Notably, the optimized aerogel exhibits the excellent electromagnetic wave absorption properties with broad effective absorption bandwidth (13.12-17.14 GHz) and strong absorption (-45.02 dB) at a thickness of only 1.5 mm. Density functional theory calculations and the experimental results demonstrate that the excellent electromagnetic wave absorption properties stem from the synergetic effects among high electrical conductivity, numerous interfaces and dipoles and unique ordered porous structure. Meanwhile, the computer simulation technology (CST) simulation confirms that the multifunctional aerogel can attenuate more electromagnetic energy in a practical environment. This work paves the way for rational design and fabrication of the next-generation electromagnetic wave absorbing materials.

Freestanding Na3V2O2(PO4)2F/Graphene Aerogels as High-Performance Cathodes of Sodium-Ion Full Batteries

Although sodium vanadium fluorophosphate, Na₃(VO_1-xPO₄)₂F_1+2x (0 ≤ x ≤ 1), is a highly promising cathode candidate for sodium-ion batteries because of its stable structure and high working voltage, the low charge diffusion dynamics and the inactive materials used in traditional coating electrodes reduce the energy density of a sodium-ion full battery. Hence, Na₃V₂O₂(PO₄)₂F/graphene aerogels (NVPF/GAs) with a three-dimensional continuous porous network are first prepared by coassembly and freeze-drying. The three-dimensional porous network helps to obtain a high NVPF content of 81 wt %, relieve the volume change for improving the cyclability, and enhance the wettability of the electrode with the electrolyte for accelerating the diffusion dynamics of sodium ions and electrons. As a directly used freestanding cathode without the use of any binder/collector, an optimized freestanding NVPF/GA electrode exhibits excellent cycling and rate performances compared to traditional coating electrodes. The average capacities at current densities of 0.2, 0.5, 1.0, 2.0, and 5.0 C are 135.4, 128.0, 125.1, 121.9, and 115.1 mA h g^-1, respectively. Especially, it maintains a capacity retention of 100% after 1000 cycles at an ultrahigh current of 40 C. A sodium-ion full battery with the NVPF/GA cathode and the Sb/graphene/carbon anode attains a of 82.1 mA h g^-1 without an obvious decline after 100 cycles.

Exploration of Advanced Electrode Materials for Approaching High-Performance Nickel-Based Superbatteries

The surging interest in high performance, low-cost, and safe energy storage devices has spurred tremendous research efforts in the development of advanced electrode active materials. Herein, the in situ growth of zinc-iron layered double hydroxide (Zn-Fe LDH) on graphene aerogel (GA) substrates through a facile, one-pot hydrothermal method is reported. The strong interaction and efficient electronic coupling between LDH and graphene substantially improve interfacial charge transport properties of the resulting nanocomposite and provide more available redox active sites for faradaic reactions. An LDH-GA||Ni(OH)₂ device is also fabricated that results in greatly enhanced specific capacity (187 mAh g^-1 at 0.1 A g^-1 ), outstanding specific energy (147 Wh kg^-1 ), excellent specific power (16.7 kW kg^-1 ), along with 88% capacity retention after >10 000 cycles. This approach is further extended to Ni-MH and Ni-Cd batteries to demonstrate the feasibility of compositing with graphene for boosting the energy storage performance of other well-known Ni-based batteries. In contrast to conventional Ni-based batteries, the nearly flat voltage plateau followed by a sloping potential profile of the integrated supercapacitor-battery enables it to be discharged down to 0 V without being damaged. These findings provide new prospects for the design of high-performance and affordable superbatteries based on earth-abundant elements.

3D-Printed Structure Boosts the Kinetics and Intrinsic Capacitance of Pseudocapacitive Graphene Aerogels

The performance of pseudocapacitive electrodes at fast charging rates are typically limited by the slow kinetics of Faradaic reactions and sluggish ion diffusion in the bulk structure. This is particularly problematic for thick electrodes and electrodes highly loaded with active materials. Here, a surface-functionalized 3D-printed graphene aerogel (SF-3D GA) is presented that achieves not only a benchmark areal capacitance of 2195 mF cm^-2 at a high current density of 100 mA cm^-2 but also an ultrahigh intrinsic capacitance of 309.1 µF cm^-2 even at a high mass loading of 12.8 mg cm^-2 . Importantly, the kinetic analysis reveals that the capacitance of SF-3D GA electrode is primarily (93.3%) contributed from fast kinetic processes. This is because the 3D-printed electrode has an open structure that ensures excellent coverage of functional groups on carbon surface and facilitates the ion accessibility of these surface functional groups even at high current densities and large mass loading/electrode thickness. An asymmetric device assembled with SF-3D GA as anode and 3D-printed GA decorated with MnO₂ as cathode achieves a remarkable energy density of 0.65 mWh cm^-2 at an ultrahigh power density of 164.5 mW cm^-2 , outperforming carbon-based supercapacitors operated at the same power density.

Green Synthesis of Composite Graphene Aerogels with Robust Magnetism for Effective Water Remediation

Graphene-based three-dimensional (3D) magnetic assemblies have attracted great research attention owing to their multiple natures inherited from 3D graphene assemblies and magnetic materials. However, at present, the practical applications of graphene-based magnetic materials are limited by the relative complex synthesis procedure and harsh operation conditions. Hence, a facile and green synthesis strategy is highly desired. Herein, a magnetic graphene aerogel with magnetite nanoparticles in-situ synthesized on the surface of its frameworks was fabricated through a green and facile strategy. The synthesis process was performed in a gentle condition with low energy consumption. The obtained graphene aerogels exhibited superior magnetism with a saturation magnetization of 55.7 emu·g-1. With the merits of well-developed pore structures, high surface area, and robust magnetic property, the obtained composite aerogels exhibited intriguing adsorption and photo-Fenton catalytic degradation performances for the organic dyes in water. Moreover, the utilized graphene aerogels could be recycled from the water due to their effective magnetic separation performance, indicating a promising capability for practical applications in the area of water remediation. We anticipate this synthesis strategy could provide some guidance for the design and development of 3D magnetic assemblies.

Millisecond Response of Shape Memory Polymer Nanocomposite Aerogel Powered by Stretchable Graphene Framework

Shape memory polymers (SMPs) change shapes as-designed through altering the chain segment movement by external stimuli, promising wide uses in actuators, sensors, drug delivery, and deployable devices. However, the recovery speed of SMPs is still far slower than the benchmark shape memory alloys (SMAs), originating from their intrinsic poor heat transport and retarded viscoelasticity of polymer chains. In this work, monolithic nanocomposite aerogels composed of bicontinuous graphene and SMP networks are designed to promote the recovery time of SMP composites to a record value of 50 ms, comparable to the SMA case. The integration of a stretchable graphene framework as a fast energy transformation grid with ultrathin polycaprolactone nanofilms (tunable at 2.5-60 nm) enables the rapid phase transition of SMPs under electrical stimulation. The graphene-SMP nanocomposite aerogels, with a density of ∼10 mg cm^-3, exhibit a fast response (175 ± 40 mm s^-1), large deformation (∼100%), and a wide response bandwidth (0.1-20 Hz). The ultrafast response of SMP nanocomposite aerogels confers extensive uses in sensitive fuses, micro-oscillators, artificial muscles, actuators, and soft robotics. The design of bicontinuous ultralight aerogels can be extended to fabricate multifunctional and multiresponsive hybrid materials and devices.

Graphene Aerogel Based Bolometer for Ultrasensitive Sensing from Ultraviolet to Far-Infrared

This work uncovers that free-standing partly reduced graphene aerogel (PRGA) films in vacuum exhibit extraordinarily bolometric responses. This high performance is mainly attributed to four structure characteristics: extremely low thermal conductivity (6.0-0.6 mW·m^-1·K^-1 from 295 to 10 K), high porosity, ultralow density (4 mg·cm^-3), and abundant functional groups (resulting in tunable band gap). Under infrared radiation (peaked at 5.8-9.7 μm), the PRGA film can detect a temperature change of 0.2, 1.0, and 3.0 K of a target at 3, 25, and 54 cm distance. Even through a quartz window (transmissivity of ∼0.98 in the range of 2-4 μm), it can still successfully detect a temperature change of 0.6 and 5.8 K of a target at 3 and 28 cm distance. At room temperature, a laser power as low as 7.5 μW from a 405 nm laser and 5.9 μW from a 1550 nm laser can be detected. The detecting sensitivity to the 1550 nm laser is further increased by 3-fold when the sensor temperature was reduced from 295 K to 12 K. PRGA films are demonstrated to be a promising ultrasensitive bolometric detector, especially at low temperatures.

Compressible Supercapacitor with Residual Stress Effect for Sensitive Elastic-Electrochemical Stress Sensor

In this work, we have synthesized graphene aerogels using natural-drying method and fabricated a compressible all-solid-state supercapacitor, which offers outstanding energy density of 23.08 Wh kg^-1 at 240 W kg^-1. We further demonstrate that the device is deformable in squeezed cases with a residual stress effect. Taking advantage of the compressibility and excellent electrochemical performance of the graphene aerogel, we offer a new type of stress sensor called elastic-electrochemical stress sensor. Served as the elastic-electrochemical stress device, the cell demonstrates steady response current toward the external mechanical force by transforming mechanical energy to electrochemical energy. The high-sensitive stress sensor will help us comprehend the interaction principle between electrochemistry and external stress well.

Multiresponsive Graphene-Aerogel-Directed Phase-Change Smart Fibers

Wearable devices and systems demand multifunctional units with intelligent and integrative functions. Smart fibers with response to external stimuli, such as electrical, thermal, and photonic signals, etc., as well as offering energy storage/conversion are essential units for wearable electronics, but still remain great challenges. Herein, flexible, strong, and self-cleaning graphene-aerogel composite fibers, with tunable functions of thermal conversion and storage under multistimuli, are fabricated. The fibers made from porous graphene aerogel/organic phase-change materials coated with hydrophobic fluorocarbon resin render a wide range of phase transition temperature and enthalpy (0-186 J g^-1 ). The strong and compliant fibers are twisted into yarn and woven into fabrics, showing a self-clean superhydrophobic surface and excellent multiple responsive properties to external stimuli (electron/photon/thermal) together with reversible energy storage and conversion. Such aerogel-directed smart fibers promise for broad applications in the next-generation of wearable systems.

Ni2 P@Carbon Core-Shell Nanoparticle-Arched 3D Interconnected Graphene Aerogel Architectures as Anodes for High-Performance Sodium-Ion Batteries

To alleviate large volume change and improve poor electrochemical reaction kinetics of metal phosphide anode for sodium-ion batteries, for the first time, an unique Ni₂ P@carbon/graphene aerogel (GA) 3D interconnected porous architecture is synthesized through a solvothermal reaction and in situ phosphorization process, where core-shell Ni₂ P@C nanoparticles are homogenously embedded in GA nanosheets. The synergistic effect between components endows Ni₂ P@C/GA electrode with high structural stability and electrochemical activity, leading to excellent electrochemical performance, retaining a specific capacity of 124.5 mA h g^-1 at a current density of 1 A g^-1 over 2000 cycles. The robust 3D GA matrix with abundant open pores and large surface area can provide unblocked channels for electrolyte storage and Na⁺ transfer and make fully close contact between the electrode and electrolyte. The carbon layers and 3D GA together build a 3D conductive matrix, which not only tolerates the volume expansion as well as prevents the aggregation and pulverization of Ni₂ P nanoparticles during Na⁺ insertion/extraction processes, but also provides a 3D conductive highway for rapid charge transfer processes. The present strategy for phosphides via in situ phosphization route and coupling phosphides with 3D GA can be extended to other novel electrodes for high-performance energy storage devices.

Naturally Dried Graphene Aerogels with Superelasticity and Tunable Poisson's Ratio

A novel natural drying (ND) strategy for low-cost and simple fabrication of graphene aerogels (GAs) is highlighted. The as-formed NDGAs exhibit ultralarge reversible compressibility (99%) and tunable Poisson's ratio behaviors (-0.30 < ν < 0.46), which suggests promising applications in soft actuators, soft robots, sensors, deformable electronic devices, drug release, thermal insulator, and protective materials.

Graphene Aerogels with Anchored Sub-Micrometer Mulberry-Like ZnO Particles for High-Rate and Long-Cycle Anode Materials in Lithium Ion Batteries

Graphene aerogels (GAs) anchoring hierarchical, mulberry-like ZnO particles are fabricated in situ using a one-step solvothermal reaction. The resulting composites can function as anodes in lithium ion batteries, where they exhibit a high capacity and cyclic stability. The reversible capacities obtained are 365, 320, and 230 mA h g^-1 at current densities of 1, 2, and 10 A g^-1 . Their high reversible capacity is 445 mA h g^-1 at a current density of 1.6 A g^-1 ; this value is maintained even after the 500th cycle, The excellent electrochemical performance is attributed to strong oxygen bridges between ZnO and graphene, where C-O-Zn linkages provide a good pathway for electron transport during charge/discharge cycles. Additionally, the hierarchical structure of the ZnO microballs suppresses stacking among the graphene layers, allowing the GAs to accelerate the transport of lithium ions. Furthermore, the GA framework enhances the electrical conductivity and buffer any volume expansion.

3D Printing of Graphene Aerogels

3D printing of a graphene aerogel with true 3D overhang structures is highlighted. The aerogel is fabricated by combining drop-on-demand 3D printing and freeze casting. The water-based GO ink is ejected and freeze-cast into designed 3D structures. The lightweight (<10 mg cm(-3) ) 3D printed graphene aerogel presents superelastic and high electrical conduction.

Robust Vacuum-/Air-Dried Graphene Aerogels and Fast Recoverable Shape-Memory Hybrid Foams

New graphene aerogels can be fabricated by vacuum/air drying, and because of the mechanical robustness of the graphene aerogels, shape-memory polymer/graphene hybrid foams can be fabricated by a simple infiltration-air-drying-crosslinking method. Due to the superelasticity, high strength, and good electrical conductivity of the as-prepared graphene aerogels, the shape-memory hybrid foams exhibit excellent thermotropical and electrical shape-memory properties, outperforming previously reported shape-memory polymer foams.