Proniosomal Gel-Loaded Phosphodiesterase Inhibitors (Sildenafil, Vardenafil, and Tadalafil): Prospects for Topical Penile Therapy of Tadalafil for Treatment of Erectile Dysfunction

Oral phosphodiesterase inhibitors have emerged as a game changer for the treatment of erectile dysfunction (ED) since attaining FDA approval for its first member, sildenafil, in 1998. Topical penile therapy could be a viable replacement for oral medication that would transform the treatment of ED for many decades to come. This innovative idea could offer a safer topical alternative with less vision and cardiovascular side effects than the oral route. This work aims at developing proniosomal gels for three selected members (sildenafil, vardenafil, and tadalafil) and investigating the proniosomal gels on a rodent model. Niosomes derived from the parent proniosomal gels were characterized for entrapment efficiency (EE%), size, polydispersity index (PDI), zeta potential, and morphology. Proniosomal gels were evaluated for skin permeation, in vivo mating behaviors, and biochemical assays of nitric oxide (NO) and cyclic guanosine monophosphate (cGMP) post penile topical administrations. The optimized proniosomes loaded with tadalafil (F1-T) were compared with oral tablets (Cialis®). Proniosomal gels demonstrated significant enhancement of skin penetration by up to 5.5-fold, compared to control topical suspension. Tadalafil-loaded proniosomes showed superior skin permeability over sildenafil- and vardenafil-loaded proniosomes. In addition, significant improvement was noticed regarding intromission number, intromission ratio, NO, and cGMP for the proniosomal gel F1-T, compared to the untreated control. No statistically significant (p > 0.05) differences in sexual performance or biochemical parameters (NO and cGMP levels) were recorded among orally and topically (tadalafil proniosomal gel) administered groups. These findings support tadalafil topical penile therapy as a promising alternative to the oral route.

The Position of the Virtual Hinge Axis in Relation to the Maxilla in Digital Orthognathic Surgery Planning-A k-Means Cluster Analysis

The aim of this study was to investigate a possible relation between skeletal phenotypes and virtual mounting data in orthognathic surgery patients. A retrospective cohort study including 323 female (26.1 ± 8.7 years) and 191 male (27.9 ± 8.3 years) orthognathic surgery patients was conducted. A k-means cluster analysis was performed on the mounting parameters: the angle α between the upper occlusal plane (uOP) and the axis orbital plane (AOP); the perpendicular distance (AxV) from the uOP to the hinge axis; and the horizontal length (AxH) of the uOP from upper incisor edge to AxV, with subsequent statistical analysis of related cepalometric values. Three clusters of mounting data were identified, representing three skeletal phenotypes: (1) balanced face with marginal skeletal class II or III and α=8∘, AxV = 36 mm and AxH = 99 mm; (2) vertical face with skeletal class II and α=11∘, AxV = 27 mm and AxH = 88 mm; (3) horizontal face with class III and α=2∘, AxV = 36 mm and AxH = 86 mm. The obtained data on the position of the hinge axis can be applied to any digital planning in orthognathic surgery using CBCT or a virtual articulator, provided that the case can be clearly assigned to one of the calculated clusters.

Double-Blind, Placebo-Controlled Trial of Cyproterone Acetate to Prevent Flare-Up Effect on Dogs Implanted With Deslorelin

Deslorelin slow-released implants are registered in Europe for the reversible suppression of fertility in male dogs. After administration, a time-limited increase in sex hormones concentration and related behavioral problems may be observed. The aim of this work was to assess whether cyproterone acetate, a synthetic progestogen, can prevent this flare-up effect. Eighteen privately-owned entire male dogs were enrolled in this double-blind, placebo-controlled, randomized clinical trial. All subjects received a 4.7 mg deslorelin implant by SC route and 1-3 capsules containing either cyproterone acetate 2 mg/kg (N = 9) or a placebo (N = 9), by oral route BID for 14 days, depending on the dog's weight. The dogs were followed for 28 days. An increase in the blood testosterone concentration was observed in respectively 9/9 and 7/9 dogs of the control and cyproterone groups (p = 0.47). However, a worsening of the sex hormone related problems (i.e., urinary marking, mounting, aggressiveness toward other dogs and/or escape) was only observed in the placebo group, in 56 or 66% of the dogs as measured by respectively the veterinarian and the owners. Our study suggests that cyproterone acetate is effective and safe to supress the deslorelin induced behavioral flare-up effect, but not the rise in testosterone.

Tools to Image Germplasm Dynamics During Early Zebrafish Development

During the first day of zebrafish development, ribonucleoprotein (RNP) complexes called germplasm form large aggregates that initially segregate asymmetrically during cleavage stages. After zygotic genome activation, the granules break into smaller fragments that associate with the nuclear membrane as perinuclear (germ) granules toward the end of gastrulation. The mechanisms underlying the highly dynamic behavior of germ granules are not well studied but thought to be facilitated by the cytoskeleton. Here, we present efficient mounting strategies using 3d-printed tools that generate wells on agarose-coated sample holders to allow high-resolution imaging of multiplexed embryos that are less than one day post-fertilization (dpf) on inverted (spinning disk confocal) as well as upright (lattice light-sheet and diSPIM) microscopes. In particular, our tools and methodology allow water dipping lenses to have direct access to mounted embryos, with no obstructions to the light path (e.g., through low melting agarose or methyl cellulose). Moreover, the multiplexed tight arrays of wells generated by our tools facilitate efficient mounting of early embryos (including cleavage stages) for live imaging. These methods and tools, together with new transgenic reporter lines, can facilitate the study of germ granule dynamics throughout their lifetime in detail, at high resolution and throughput, using live imaging technologies.

Technique to Maintain the Correct Spatial Orientation of the Maxillary Diagnostic Cast to that of the Master Cast in a Full-Mouth Rehabilitation Case

A common challenge in full-mouth rehabilitation is preserving the correct spatial orientation of the maxillary diagnostic, diagnostic wax-up and master casts within the dental articulator. Any malposition of the maxillary master cast will immediately invalidate the articulator settings that were programmed from the pantographic or axiographic tracing. This will subsequently affect the occlusal morphology of the restorations. The technique presented in this article helps to precisely relocate the maxillary master cast to the same spatial orientation as both the initial diagnostic, and diagnostic wax-up casts.

Estimates of intra- and interclass correlation coefficients for rump touches and the number of steps during estrus in postpartum cows

Estrus traits have economic value in dairy production systems and could be incorporated into genetic selection indices. In an effort to further understand selection responses, 2 studies were performed to estimate the intra- and interclass correlation coefficients for estrus traits. Holstein-Friesian cows (n = 1,197; study 1) across 5 pasture-based grazing dairy herds were fitted with a capacitive touch sensing (CTS) device on the rump (FlashMate, Farmshed Labs Limited, Hamilton, New Zealand). The daily number of rump touches were subjected to a peak detection program to objectively identify periods of increased rump touches above baseline (indicative of estrus). The number of times touched and the sum of the touch duration were used to compare farms and estimate the intraclass correlation (repeatability). For study 2, postpartum Holstein (n = 85) and Guernsey (n = 5) cows in a confinement-style dairy were used. Cows were fitted with an IceQube accelerometer (IceRobotics Ltd., Edinburgh, United Kingdom) to measure steps taken per hour and a CTS device was applied to both rumps. The interclass correlation for the number of rump touches and number of steps taken during estrus was calculated. Data collected from 5 herds (study 1) demonstrated a 2- to 3-fold difference between herds in the number of rump touches and total touch time during estrus. The intraclass correlation (repeatability; estimates of maximum heritability) for rump touches during estrus was 0.22. For study 2, the number of steps and the number of rump touches during estrus increased in a synchronous manner. The intraclass correlation (repeatability) for number of steps during estrus was 0.26. The interclass correlation (r) for the number of rump touches and the number of steps was 0.46 (R² = 0.21). Based on the R², at least 20% of the variation in the number of steps during estrus was explained by the number of touches to the rump of the cow. Selecting cows for the number of steps taken during estrus could increase the number of rump touches (mounts, chin rests, and so on, received from other cows) if a genetic correlation exists for the phenotypic correlation that we observed.

Ease of Handling and Physiological Parameters of Stress, Carcasses, and Pork Quality of Pigs Handled in Different Group Sizes

Simple Summary

The effect of different group sizes of pigs (3, 5, and 10 pigs) during handling on physiological parameters, carcasses, and pork quality traits at the farm and slaughterhouse were evaluated in 360 pigs. Ease of handling decreased as the group size increased. Moving pigs in smaller groups improve animal welfare parameters and carcass quality. However, meat quality classifications of the carcasses were not affected by the groups size used in preslaughter handling. Based on the results, moving groups of five pigs seems to be the best strategy to improve animal welfare and carcass quality.

Abstract

The effect of different group sizes of pigs (3, 5, and 10 pigs) during handling on physiological parameters, carcasses, and pork quality traits at the farm and slaughterhouse were evaluated in 360 pigs from five farms (four repetitions or group/treatment/farms). Data was analyzed as a factorial of 3 × 5 (3 treatments × 5 farms) to check effects of treatments by analysis of variance in ANOVA. Ease of handling decreased as the group size increased. However, time taken in handling was not influenced by the group size (p > 0.10). Moving pigs in groups of five animals reduced effects on blood cortisol levels (p < 0.05). Fighting and handling lesions in the carcasses increased for bigger handling groups (p < 0.05). Pigs handled in groups of three and ten animals had a higher pHu and initial temperature in Longissimus thoracis and Semimembranosus (p < 0.05) and lower drip loss in Semimembranosus (p < 0.05). However, meat quality classifications of the carcasses were not affected by treatments. Based on the results, moving groups of five pigs seems to be the best strategy to improve animal welfare, carcasses and pork quality.

Stereotactic accuracy and frame mounting: A phantom study

Background:

Frame mounting is considered one of the most critical steps in stereotactic neurosurgery. In routine clinical practice, the aim is to mount the frame as symmetrical as possible, parallel to Reid’s line. However, sometimes, the frame is mounted asymmetrically often due to patient-related reasons.

Methods:

In this study, we addressed the question whether an asymmetrically mounted frame influences the accuracy of stereotactic electrode implantation. A Citrullus lanatus was used for this study. After a magnetic resonance imaging scan, symmetric and asymmetric mounting of the frame, which could occur in clinical scenarios, was performed with computed tomography (CT). Three different stereotactic software packages were used to analyze the results. In addition, manual calculations were performed by two different observers.

Results:

Our results show that an asymmetrically mounted frame (deviated, tilted, or rotated) does not affect the accuracy in the mediolateral axis (X-coordinate) or the anteroposterior axis (Y-coordinate). However, it can lead to a clinically relevant error in the superoinferior axis (Z-coordinate). This error was largest with manual calculations.

Conclusion:

These results suggest that asymmetrical frame mounting can lead to stereotactic inaccuracy in the superoinferior axis (Z coordinate).

A combinatorial model for effective estrus detection in Murrah buffalo

BACKGROUND

Buffaloes are silent heat animals and lacunae in their estrus detection results a substantial economic loss in developing countries. Many advanced tools to aid heat detection have been developed but are neither affordable nor easily interpretable by marginal farmers.

AIM

The present investigation was made to develop a cost-effective estrus detection model by combining several known estrus predicting parameters.

MATERIALS AND METHODS

Various signs of estrus were classified under major parameters such as visual, cow behavioral, bull behavioral, biochemical, and gyneco-clinical. Expression of those parameters was observed in buffaloes, and the percentage of positive estrus detection was calculated for each combination of estrus prediction parameters.

RESULTS

The present result concludes that the model comprises of five parameters group with several signals with twenty-six different combinations. It was observed that the expression of individual combinations and their corresponding estrus detection efficiency varies significantly, i.e., detection efficiency rises as the number of combination increases.

CONCLUSION

Combination of three parameters would provide an estrus detection efficiency >70% and suggested for an easy estrus detection. This would be a cost-effective model for farmers and benefits in enhancing buffalo population/reproduction.

Influence of social mixing and group size on skin lesions and mounting in organic entire male pigs

Alternatives to surgical castration are needed, due to stress and pain caused by castration of male pigs. One alternative is production of entire male pigs. However, changed behaviour of entire males compared with castrated males might adversely affect the welfare of entire males and changes in management procedures and production system might be needed. Elements from the organic pig production system might be beneficial in this aspect. The aim of this article is to investigate the effect of grouping strategy including social mixing and group size on levels of mounting behaviour and skin lesions, hypothesising that procedures that disrupt the social stability (e.g. regrouping) will have a larger negative effect in small groups compared with large groups. Approximately 1600 organic entire male pigs of the breed (Landrace×Yorkshire)×Duroc were reared in parallel in five organic herds, distributed across four batches in a 2×2 factorial design in order to test the influence of social mixing (presence or absence of social mixing at relocation) and group size (15 and 30 animals). Animals were able to socialise with piglets from other litters during the lactation period, and were all mixed across litters at weaning. A second mixing occurred at insertion to fattening pens for pigs being regrouped. Counting of skin lesions (1348 or 1124 pigs) and registration of mounting behaviour (1434 or 1258 pigs) were done on two occasions during the experimental period. No interactive effects were found between social mixing and group size on either skin lesions or mounting frequency. Herd differences were found for both mounting frequency and number of skin lesions. No association between skin lesions and mounting were revealed. Social mixing and group size were shown as interacting effects with herds on mounting frequency (P<0.0001), but with no consistent pattern across all herds. In addition, no effect of social mixing was found on mean number of skin lesions, but more lesions were observed in large groups (P<0.036). This could indicate that keeping entire male pigs in groups of 30 animals as compared with smaller groups of 15 may marginally decrease the welfare of these animals.

Using wintergreen oil for mounting mosquito larvae: a safer alternative to xylene

Permanent mounting of fourth instar mosquito larvae is essential for identifying Aedes spp. This procedure requires extensive exposure to xylene, a clearing agent in the mounting process. We investigated wintergreen oil as a substitute for xylene. Five hundred larvae were mounted on slides to evaluate shrinkage or expansion of specimens after clearing using xylene or wintergreen oil. We examined the ventral brush and siphonal hair tufts for species identification and for preservation of morphological characteristics after clearing specimens in xylene or wintergreen oil. Shrinkage of the length of whole larvae and width of the head, thorax and abdomen after mounting was significantly greater after clearing with xylene than with wintergreen oil. The length of the comb scale nearest the ventral brush was similar for both clearing agents. The clarity of the specimens after mounting was improved by clearing with wintergreen oil, but the integrity of the ventral brush and siphonal hair tufts were similar for both clearing agents.

Neuroanatomical dichotomy of sexual behaviors in rodents: a special emphasis on brain serotonin

Much of the social behavior in which rodents engage is related to reproduction, such as maintaining a breeding territory, seeking mates, mating, and caring for their young. Rodents belong to the internally fertilizing species that require sexual behavior for reproduction. The dyadic, heterosexual patterns of most mammalian species are sexually dimorphic, but they also share mutual components in both sexes: sexual attraction is reciprocal, sexual initiative is assumed, appetitive behavior is engaged in, and mating involves consummatory and postconsummatory phases in females as well as in males. Serotonin, a phylogenetically ancient molecule, is the most widely distributed neurotransmitter in the brain and its signaling pathways are essential for numerous functions including sexual behavior. Since the late 1960s, brain serotonergic neurotransmission has been considered to exert an inhibitory influence on the neural mechanisms mediating sexual behavior. This contention was based mainly on the observations that a decrease in central serotonergic activity facilitated the elicitation of sexual behavior, whereas an increase in central serotonergic activity attenuated it. However, the discovery of over 14 types of serotonin receptors has added numerous layers of complexity to the study of serotonin and sexual behavior. Evidence shows that, upon activation, certain receptor subtypes facilitate, whereas some others suppress, sexual behavior, as well as sexual arousal and motivation. Furthermore, the role of these receptors has been shown to be different in the male and female sexes. The use of serotonergic pharmacological interventions, mouse strains with genetic polymorphisms causing alterations in the levels of brain serotonin, and animal models with genetic manipulations of various serotonin effectors has helped delineate the fundamental role of this neurotransmitter in the regulation of sexual behavior. This review aims to examine the basics of the components of female and male sexual behavior and the participation of the serotonin system in the modulation of these behaviors, with emphasis on rodents.

Anchoring protein crystals to mounting loops with hydrogel using inkjet technology

X-ray crystallography is an important technique for structure-based drug discovery, mainly because it is the only technique that can reveal whether a ligand binds to the target protein as well as where and how it binds. However, ligand screening by X-ray crystallography involves a crystal-soaking experiment, which is usually performed manually. Thus, the throughput is not satisfactory for screening large numbers of candidate ligands. In this study, a technique to anchor protein crystals to mounting loops by using gel and inkjet technology has been developed; the method allows soaking of the mounted crystals in ligand-containing solution. This new technique may assist in the design of a fully automated drug-screening pipeline.

Development of sexual behavior in free-ranging female Japanese macaques

We studied the development of sexual behaviors in female Japanese macaques (Macaca fuscata) living at Arashiyama, Japan, in a group where adult females routinely exhibit sexual interactions with both males and females. Our cross-sectional data on juvenile, adolescent, and adult females supported most of our predictions related to the learning hypothesis, which holds that adolescence serves to provide females with a period in which to practice adult female-like sexual behavioral patterns, including sexual solicitations, sexual mounts, and spatio-temporal coordination during consortships. We found evidence for a gradual acquisition of adult-like behavioral patterns (e.g., more frequent solicitations with body contact, more frequent complete mounts, more diverse solicitation patterns and complete mounting postures, and longer consortships involving prolonged inter-mount grasping behavior between partners), and a gradual disappearance of less effective immature behavioral patterns (e.g., less frequent non-contact solicitations, ambiguous mounting initiations, and incomplete mounts). We distinguished between three major categories of sexual behavioral patterns based on their speed of development, ranging from fast (e.g., diversity in mounting postures and genital stimulation during mounting) to slow (e.g., contact solicitations and grasping behavior between consortship partners), with some being intermediate (e.g., range of solicitation patterns and expression of complete mounts). This study showed that the emergence of both conceptive and non-conceptive adult sexual behaviors can be traced back to immature behavioral patterns in adolescent female Japanese macaques, with a major threshold occurring at the age of 4 years.

An investigation of the use of rectangular insecticide-treated nets for malaria control in Chipinge District, Zimbabwe: a descriptive study

INTRODUCTION

In 2007, Zimbabwe government distributed rectangular insecticide treated nets in Chipinge District, covering 100% of population at risk. However, malaria morbidity continued increasing from 492/1000 (49.2%) in 2007 to 667/1000 (66.7%) in 2008. A study was conducted in Chipinge District in May 2009 to investigate the use of rectangular insecticide treated nets and factors affecting their use in malaria prevention.

METHODS

A descriptive cross-sectional study was conducted. Quantitative and qualitative methods were triangulated to assess utilisation of rectangular insecticide treated nets. Five interviewers administered 380 questionnaires to senior matriarchs selected from five wards, with 19,667 sampling frame (19,667/380 = 52). Five focus group discussions were conducted. Quantitative data were analysed using Statistical Package for the Social Sciences, while qualitative data were summarised into thematic areas.

RESULTS

Approximately, 95% of respondents knew that malaria was caused by mosquito bites. Perception of nets as malaria preventative measure was high (88%). Utilization of rectangular insecticide treated nets was low (33%) with 81% of those not using them expressed difficulty procedures of mounting them and unavailability of related accessories as main reasons. People preferred conical insecticide treated nets (84%) compared to rectangular insecticide treated nets (15%).

CONCLUSION

Although the Chipinge people accepted insecticide treated nets for malaria prevention, procedure of mounting rectangular insecticide treated nets and accessing related accessories prevented consistent use.In order for insecticide treated net project to have impact on malaria prevention, priority should be given to conical shape or rectangular shape with adequate accessories like wire nails and strings or twine.

Horizontal Transmission of Bursaphelenchus xylophilus between Sexes of Monochamus alternatus

Four experiments were conducted using nematode-infested and nematode-free adults of the cerambycid beetle, Monochamus alternatus, to determine horizontal transmission pathways of Bursaphelenchus xylophilus. When nematode-infested beetles of one sex and nematode-free beetles of the opposite sex were paired in containers for 48 or 72 hours, the number of nematodes carried by nematode-free beetles tended to increase with increased number of nematodes carried by nematode-infested beetles. The nematodes acquired by "nematode-free" beetles could be transmitted to pine. A female beetle that received 13 nematodes from a male transmitted one nematode to a Pinus densiflora bolt via an oviposition wound. When the nematode-infested and nematode-free beetles were observed continuously, it was observed that the number of nematodes carried by nematode-free beetles at the end of the first sexual mounting increased as the number of nematodes carried by nematode-infested beetles just before mounting increased. The number of nematodes transferred to nematode-free beetles was positively related to duration time of mounting. There was no difference in transmission efficacy between male-to-female transmission and female-to-male transmission. The horizontal transmission pathways are discussed relative to the persistence of B. xylophilus in resistant pine forests and the control of pine wilt disease.

Sample Preparation for Electron Probe Microanalysis-Pushing the Limits

There are two fundamental considerations in preparing samples for electron probe microanalysis (EPMA). The first one may seem obvious, but we often find it is overlooked. That is, the sample analyzed should be representative of the population from which it comes. The second is a direct result of the assumptions in the calculations used to convert x-ray intensity ratios, between the sample and standard, to concentrations. Samples originate from a wide range of sources. During their journey to being excited under the electron beam for the production of x rays there are many possibilities for sample alteration. Handling can contaminate samples by adding extraneous matter. In preparation, the various abrasives used in sizing the sample by sawing, grinding and polishing can embed themselves. The most accurate composition of a contaminated sample is, at best, not representative of the original sample; it is misleading. Our laboratory performs EPMA analysis on customer submitted samples and prepares over 250 different calibration standards including pure elements, compounds, alloys, glasses and minerals. This large variety of samples does not lend itself to mass production techniques, including automatic polishing. Our manual preparation techniques are designed individually for each sample. The use of automated preparation equipment does not lend itself to this environment, and is not included in this manuscript. The final step in quantitative electron probe microanalysis is the conversion of x-ray intensities ratios, known as the "k-ratios," to composition (in mass fraction or atomic percent) and/or film thickness. Of the many assumptions made in the ZAF (where these letters stand for atomic number, absorption and fluorescence) corrections the localized geometry between the sample and electron beam, or takeoff angle, must be accurately known. Small angular errors can lead to significant errors in the final results. The sample preparation technique then becomes very important, and, under certain conditions, may even be the limiting factor in the analytical uncertainty budget. This paper considers preparing samples to get known geometries. It will not address the analysis of samples with irregular, unprepared surfaces or unknown geometries.

Footedness and Mounting-Short Review and Two Case Studies

Footedness is a personal quality like handedness. Footedness may be associated with moving ability during mounting, dismounting, and jumping movements. Occupational accidents have occurred during movement at different working levels, during the use of access and exit systems, and during the mounting of vehicles. Aging can also affect accident risk and body laterality. For example, falling accidents on stairs are common among the elderly. One reason for accidents may be that the structure of the access system or stair system is unsuitable for individual moving patterns depending partly on body laterality. Footedness and the way the feet are used may be contradictory to the demands of the moving situation, especially during uncommon or rapid situations. This contradiction may trigger disturbance during moving. The aims of this pilot study were (a) to review the literature briefly and (b) to describe the use of the dominant and nondominant foot by farmers and the elderly when mounting a tractor and stairs, respectively. The study also gives ideas for future studies based on both (a) and (b).