1
|
Bai T, Jiang Y, Yang J, Luo J, Du Y. A data security scheme based on EEG characteristics for body area networks. Front Neurosci 2023; 17:1174096. [PMID: 37274222 PMCID: PMC10232952 DOI: 10.3389/fnins.2023.1174096] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/25/2023] [Accepted: 03/21/2023] [Indexed: 06/06/2023] Open
Abstract
Body area network (BAN) is a body-centered network of wireless wearable devices. As the basic technology of telemedicine service, BAN has aroused an immense interest in academia and the industry and provides a new technical method to solve the problems that exist in the field of medicine. However, guaranteeing full proof security of BAN during practical applications has become a technical issue that hinders the further development of BAN technology. In this article, we propose a data encryption method based on electroencephalogram (EEG) characteristic values and linear feedback shift register (LFSR) to solve the problem of data security in BAN. First, the characteristics of human EEG signals were extracted based on the wavelet packet transform method and as the MD5 input data to ensure its randomness. Then, an LFSR stream key generator was adopted. The 128-bit initial key obtained through the message-digest algorithm 5 (MD5) was used to generate the stream key for BAN data encryption. Finally, the effectiveness of the proposed security scheme was verified by various experimental evaluations. The experimental results showed that the correlation coefficient of data before and after encryption was very low, and it was difficult for the attacker to obtain the statistical features of the plaintext. Therefore, the EEG-based security scheme proposed in this article presents the advantages of high randomness and low computational complexity for BAN systems.
Collapse
Affiliation(s)
- Tong Bai
- School of Optoelectronic Engineering, Chongqing University of Posts and Telecommunications, Chongqing, China
| | - Yuhao Jiang
- School of Optoelectronic Engineering, Chongqing University of Posts and Telecommunications, Chongqing, China
| | - Jiazhang Yang
- The Women and Children Hospital of Yongchuan, Chongqing, China
| | - Jiasai Luo
- School of Optoelectronic Engineering, Chongqing University of Posts and Telecommunications, Chongqing, China
| | - Ya Du
- Department of Peripheral Vascular (Wound Repair), Chongqing Hospital of Traditional Chinese Medicine, Chongqing, China
| |
Collapse
|
2
|
Roy AS, Dzikovski B, Dolui D, Makhlynets O, Dutta A, Srivastava M. A Simulation Independent Analysis of Single- and Multi-Component cw ESR Spectra. Magnetochemistry 2023; 9:112. [PMID: 37476293 PMCID: PMC10357894 DOI: 10.3390/magnetochemistry9050112] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Indexed: 07/22/2023]
Abstract
The accurate analysis of continuous-wave electron spin resonance (cw ESR) spectra of biological or organic free-radicals and paramagnetic metal complexes is key to understanding their structure-function relationships and electrochemical properties. The current methods of analysis based on simulations often fail to extract the spectral information accurately. In addition, such analyses are highly sensitive to spectral resolution and artifacts, users' defined input parameters and spectral complexity. We introduce a simulation-independent spectral analysis approach that enables broader application of ESR. We use a wavelet packet transform-based method for extracting g values and hyperfine (A) constants directly from cw ESR spectra. We show that our method overcomes the challenges associated with simulation-based methods for analyzing poorly/partially resolved and unresolved spectra, which is common in most cases. The accuracy and consistency of the method are demonstrated on a series of experimental spectra of organic radicals and copper-nitrogen complexes. We showed that for a two-component system, the method identifies their individual spectral features even at a relative concentration of 5% for the minor component.
Collapse
Affiliation(s)
- Aritro Sinha Roy
- Department of Chemistry and Chemical Biology, Cornell University, Ithaca, NY 14853, USA
- National Biomedical Resource for Advanced ESR Spectroscopy, Cornell University, Ithaca, NY 14853, USA
| | - Boris Dzikovski
- National Biomedical Resource for Advanced ESR Spectroscopy, Cornell University, Ithaca, NY 14853, USA
| | - Dependu Dolui
- Department of Chemistry, Indian Institute of Technology Bombay, Mumbai 400076, India
| | - Olga Makhlynets
- Department of Chemistry, Syracuse University, Syracuse, NY 13244, USA
| | - Arnab Dutta
- Department of Chemistry, Indian Institute of Technology Bombay, Mumbai 400076, India
| | - Madhur Srivastava
- Department of Chemistry and Chemical Biology, Cornell University, Ithaca, NY 14853, USA
- National Biomedical Resource for Advanced ESR Spectroscopy, Cornell University, Ithaca, NY 14853, USA
| |
Collapse
|
3
|
Sinha Roy A, Srivastava M. Unsupervised Analysis of Small Molecule Mixtures by Wavelet-Based Super-Resolved NMR. Molecules 2023; 28. [PMID: 36677850 DOI: 10.3390/molecules28020792] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/07/2022] [Revised: 12/27/2022] [Accepted: 01/03/2023] [Indexed: 01/15/2023]
Abstract
Resolving small molecule mixtures by nuclear magnetic resonance (NMR) spectroscopy has been of great interest for a long time for its precision, reproducibility, and efficiency. However, spectral analyses for such mixtures are often highly challenging due to overlapping resonance lines and limited chemical shift windows. The existing experimental and theoretical methods to produce shift NMR spectra in dealing with the problem have limited applicability owing to sensitivity issues, inconsistency, and/or the requirement of prior knowledge. Recently, we resolved the problem by decoupling multiplet structures in NMR spectra by the wavelet packet transform (WPT) technique. In this work, we developed a scheme for deploying the method in generating highly resolved WPT NMR spectra and predicting the composition of the corresponding molecular mixtures from their 1H NMR spectra in an automated fashion. The four-step spectral analysis scheme consists of calculating the WPT spectrum, peak matching with a WPT shift NMR library, followed by two optimization steps in producing the predicted molecular composition of a mixture. The robustness of the method was tested on an augmented dataset of 1000 molecular mixtures, each containing 3 to 7 molecules. The method successfully predicted the constituent molecules with a median true positive rate of 1.0 against the varying compositions, while a median false positive rate of 0.04 was obtained. The approach can be scaled easily for much larger datasets.
Collapse
|
4
|
Tian X, Ao J, Ma Z, Jian B, Ma C. Concrete Multi-Type Defect Classification Algorithm Based on MSSMA-SVM. Sensors (Basel) 2022; 22:9145. [PMID: 36501847 PMCID: PMC9736279 DOI: 10.3390/s22239145] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/26/2022] [Revised: 11/22/2022] [Accepted: 11/23/2022] [Indexed: 06/17/2023]
Abstract
In order to realize the automatic classification of internal defects for non-contact nondestructive testing of concrete, a concrete multi-type defect classification algorithm based on the mixed strategy slime mold algorithm support vector machine (MSSMA-SVM) was proposed. The concrete surface's vibration signal was obtained using a laser Doppler vibrometer (LDV) for four classification targets for no defect, segregation, cavity, and foreign matter concrete classification targets. The wavelet packet transform (WPT) decomposes the detected signals to get information on different frequency bands. The energy ratio change rate, energy ratio, and wavelet packet singular entropy of each node after the WPT were used as the feature input of MSSMA-SVM. The experimental results show that the designed MSSMA-SVM classifier can accurately detect the type, which provides a practical algorithm for classifying concrete defects by laser vibration measurement.
Collapse
Affiliation(s)
- Xu Tian
- Research Institute of Optical Communication, School of Information and Communication, Guilin University of Electronic Technology, Guilin 541004, China
| | - Jun Ao
- Research Institute of Optical Communication, School of Information and Communication, Guilin University of Electronic Technology, Guilin 541004, China
| | - Zizhu Ma
- Pengcheng Laboratory, Shenzhen 322099, China
| | - Bijian Jian
- Research Institute of Optical Communication, School of Information and Communication, Guilin University of Electronic Technology, Guilin 541004, China
| | - Chunbo Ma
- Research Institute of Optical Communication, School of Information and Communication, Guilin University of Electronic Technology, Guilin 541004, China
| |
Collapse
|
5
|
Khani ME, Osman OB, Harris ZB, Chen A, Zhou JW, Singer AJ, Arbab MH. Accurate and early prediction of the wound healing outcome of burn injuries using the wavelet Shannon entropy of terahertz time-domain waveforms. J Biomed Opt 2022; 27:JBO-220119GR. [PMID: 36348509 PMCID: PMC9641274 DOI: 10.1117/1.jbo.27.11.116001] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/27/2022] [Accepted: 10/14/2022] [Indexed: 05/06/2023]
Abstract
Significance Severe burn injuries cause significant hypermetabolic alterations that are highly dynamic, hard to predict, and require acute and critical care. The clinical assessments of the severity of burn injuries are highly subjective and have consistently been reported to be inaccurate. Therefore, the utilization of other imaging modalities is crucial to reaching an objective and accurate burn assessment modality. Aim We describe a non-invasive technique using terahertz time-domain spectroscopy (THz-TDS) and the wavelet packet Shannon entropy to automatically estimate the burn depth and predict the wound healing outcome of thermal burn injuries. Approach We created 40 burn injuries of different severity grades in two porcine models using scald and contact methods of infliction. We used our THz portable handheld spectral reflection (PHASR) scanner to obtain the in vivo THz-TDS images. We used the energy to Shannon entropy ratio of the wavelet packet coefficients of the THz-TDS waveforms on day 0 to create supervised support vector machine (SVM) classification models. Histological assessments of the burn biopsies serve as the ground truth. Results We achieved an accuracy rate of 94.7% in predicting the wound healing outcome, as determined by histological measurement of the re-epithelialization rate on day 28 post-burn induction, using the THz-TDS measurements obtained on day 0. Furthermore, we report the accuracy rates of 89%, 87.1%, and 87.6% in automatic diagnosis of the superficial partial-thickness, deep partial-thickness, and full-thickness burns, respectively, using a multiclass SVM model. Conclusions The THz PHASR scanner promises a robust, high-speed, and accurate diagnostic modality to improve the clinical triage of burns and their management.
Collapse
Affiliation(s)
- Mahmoud E. Khani
- Stony Brook University, Department of Biomedical Engineering, Stony Brook, New York, United States
| | - Omar B. Osman
- Stony Brook University, Department of Biomedical Engineering, Stony Brook, New York, United States
| | - Zachery B. Harris
- Stony Brook University, Department of Biomedical Engineering, Stony Brook, New York, United States
| | - Andrew Chen
- Stony Brook University, Department of Biomedical Engineering, Stony Brook, New York, United States
| | - Juin W. Zhou
- Stony Brook University, Department of Biomedical Engineering, Stony Brook, New York, United States
| | - Adam J. Singer
- Renaissance School of Medicine at Stony Brook University, Department of Emergency Medicine, Stony Brook, New York, United States
| | - Mohammad Hassan Arbab
- Stony Brook University, Department of Biomedical Engineering, Stony Brook, New York, United States
| |
Collapse
|
6
|
Deng T, Huang J, Cao M, Li D, Bayat M. Seismic Damage Identification Method for Curved Beam Bridges Based on Wavelet Packet Norm Entropy. Sensors (Basel) 2021; 22:239. [PMID: 35009782 PMCID: PMC8749680 DOI: 10.3390/s22010239] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/22/2021] [Revised: 12/24/2021] [Accepted: 12/28/2021] [Indexed: 06/14/2023]
Abstract
Curved beam bridges, whose line type is flexible and beautiful, are an indispensable bridge type in modern traffic engineering. Nevertheless, compared with linear bridges, curved beam bridges have more complex internal forces and deformation due to the curvature; therefore, this type of bridge is more likely to suffer damage in strong earthquakes. The occurrence of damage reduces the safety of bridges, and can even cause casualties and property loss. For this reason, it is of great significance to study the identification of seismic damage in curved beam bridges. However, there is currently little research on curved beam bridges. For this reason, this paper proposes a damage identification method based on wavelet packet norm entropy (WPNE) under seismic excitation. In this method, wavelet packet transform is adopted to highlight the damage singularity information, the Lp norm entropy of wavelet coefficient is taken as a damage characteristic factor, and then the occurrence of damage is characterized by changes in the damage index. To verify the feasibility and effectiveness of this method, a finite element model of Curved Continuous Rigid-Frame Bridges (CCRFB) is established for the purposes of numerical simulation. The results show that the damage index based on WPNE can accurately identify the damage location and characterize the severity of damage; moreover, WPNE is more capable of performing damage location and providing early warning than the method based on wavelet packet energy. In addition, noise resistance analysis shows that WPNE is immune to noise interference to a certain extent. As long as a series of frequency bands with larger correlation coefficients are selected for WPNE calculation, independent noise reduction can be achieved.
Collapse
Affiliation(s)
- Tongfa Deng
- Jiangxi Province Key Laboratory of Environmental Geotechnical Engineering and Hazards Control, Jiangxi University of Science and Technology, Ganzhou 341000, China; (J.H.); (M.C.)
- School of Civil and Surveying & Mapping Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China
| | - Jinwen Huang
- Jiangxi Province Key Laboratory of Environmental Geotechnical Engineering and Hazards Control, Jiangxi University of Science and Technology, Ganzhou 341000, China; (J.H.); (M.C.)
- School of Civil and Surveying & Mapping Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China
| | - Maosen Cao
- Jiangxi Province Key Laboratory of Environmental Geotechnical Engineering and Hazards Control, Jiangxi University of Science and Technology, Ganzhou 341000, China; (J.H.); (M.C.)
- Department of Engineering Mechanics, Hohai University, Nanjing 210098, China;
| | - Dayang Li
- Department of Engineering Mechanics, Hohai University, Nanjing 210098, China;
| | - Mahmoud Bayat
- Department of Mechanical Engineering, University of South Carolina, Columbia, SC 29208, USA;
| |
Collapse
|
7
|
Xu H, Lu T, Montillet JP, He X. An Improved Adaptive IVMD-WPT-Based Noise Reduction Algorithm on GPS Height Time Series. Sensors (Basel) 2021; 21:8295. [PMID: 34960391 DOI: 10.3390/s21248295] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/20/2021] [Revised: 12/06/2021] [Accepted: 12/08/2021] [Indexed: 11/17/2022]
Abstract
To improve the reliability of Global Positioning System (GPS) signal extraction, the traditional variational mode decomposition (VMD) method cannot determine the number of intrinsic modal functions or the value of the penalty factor in the process of noise reduction, which leads to inadequate or over-decomposition in time series analysis and will cause problems. Therefore, in this paper, a new approach using improved variational mode decomposition and wavelet packet transform (IVMD-WPT) was proposed, which takes the energy entropy mutual information as the objective function and uses the grasshopper optimisation algorithm to optimise the objective function to adaptively determine the number of modal decompositions and the value of the penalty factor to verify the validity of the IVMD-WPT algorithm. We performed a test experiment with two groups of simulation time series and three indicators: root mean square error (RMSE), correlation coefficient (CC) and signal-to-noise ratio (SNR). These indicators were used to evaluate the noise reduction effect. The simulation results showed that IVMD-WPT was better than the traditional empirical mode decomposition and improved variational mode decomposition (IVMD) methods and that the RMSE decreased by 0.084 and 0.0715 mm; CC and SNR increased by 0.0005 and 0.0004 dB, and 862.28 and 6.17 dB, respectively. The simulation experiments verify the effectiveness of the proposed algorithm. Finally, we performed an analysis with 100 real GPS height time series from the Crustal Movement Observation Network of China (CMONOC). The results showed that the RMSE decreased by 11.4648 and 6.7322 mm, and CC and SNR increased by 0.1458 and 0.0588 dB, and 32.6773 and 26.3918 dB, respectively. In summary, the IVMD-WPT algorithm can adaptively determine the number of decomposition modal functions of VMD and the optimal combination of penalty factors; it helps to further extract effective information for noise and can perfectly retain useful information in the original time series.
Collapse
|
8
|
Ferrando Chacón JL, Fernández de Barrena T, García A, Sáez de Buruaga M, Badiola X, Vicente J. A Novel Machine Learning-Based Methodology for Tool Wear Prediction Using Acoustic Emission Signals. Sensors (Basel) 2021; 21:s21175984. [PMID: 34502874 PMCID: PMC8434684 DOI: 10.3390/s21175984] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/23/2021] [Revised: 08/31/2021] [Accepted: 09/01/2021] [Indexed: 11/16/2022]
Abstract
There is an increasing trend in the industry of knowing in real-time the condition of their assets. In particular, tool wear is a critical aspect, which requires real-time monitoring to reduce costs and scrap in machining processes. Traditionally, for the purpose of predicting tool wear conditions in machining, mathematical models have been developed to extract the information from the signal of sensors attached to the machines. To reduce the complexity of developing physical models, where an in-depth knowledge of the system being modelled is required, the current trend is to use machine-learning (ML) models based on data from the tool wear. The acoustic emission (AE) technique has been widely used to capture data from and understand the real-time condition of industrial assets such as cutting tools. However, AE signal interpretation and processing is rather complex. One of the most common features extracted from AE signals to predict the tool wear is the counts parameter, defined as the number of times that the amplitude of the signal exceeds a predefined threshold. A recurrent problem of this feature is to define the adequate threshold to obtain consistent wear prediction. Additionally, AE signal bandwidth is rather wide, and the selection of the optimum frequencies band for feature extraction has been pointed out as critical and complex by many authors. To overcome these problems, this paper proposes a methodology that applies multi-threshold count feature extraction at multiresolution level using wavelet packet transform, which extracts a redundant and non-optimal feature map from the AE signal. Next, recursive feature elimination is performed to reduce and optimize the vast number of predicting features generated in the previous step, and random forests regression provides the estimated tool wear. The methodology presented was tested using data captured when turning 19NiMoCr6 steel under pre-established cutting conditions. The results obtained were compared with several ML algorithms such as k-nearest neighbors, support vector machines, artificial neural networks and decision trees. Experimental results show that the proposed method can reduce the predicted root mean squared error by 36.53%.
Collapse
Affiliation(s)
- Juan Luis Ferrando Chacón
- Vicomtech Foundation, Basque Research and Technology Alliance (BRTA), Mikeletegi 57, 20009 Donostia-San Sebastian, Spain; (T.F.d.B.); (A.G.)
- Correspondence:
| | - Telmo Fernández de Barrena
- Vicomtech Foundation, Basque Research and Technology Alliance (BRTA), Mikeletegi 57, 20009 Donostia-San Sebastian, Spain; (T.F.d.B.); (A.G.)
| | - Ander García
- Vicomtech Foundation, Basque Research and Technology Alliance (BRTA), Mikeletegi 57, 20009 Donostia-San Sebastian, Spain; (T.F.d.B.); (A.G.)
| | - Mikel Sáez de Buruaga
- Faculty of Engineering, Mondragon University, 20500 Mondragon, Spain; (M.S.d.B.); (X.B.); (J.V.)
| | - Xabier Badiola
- Faculty of Engineering, Mondragon University, 20500 Mondragon, Spain; (M.S.d.B.); (X.B.); (J.V.)
| | - Javier Vicente
- Faculty of Engineering, Mondragon University, 20500 Mondragon, Spain; (M.S.d.B.); (X.B.); (J.V.)
| |
Collapse
|
9
|
Chui KT, Gupta BB, Liu RW, Vasant P. Handling Data Heterogeneity in Electricity Load Disaggregation via Optimized Complete Ensemble Empirical Mode Decomposition and Wavelet Packet Transform. Sensors (Basel) 2021; 21:3133. [PMID: 33946443 DOI: 10.3390/s21093133] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/07/2021] [Revised: 04/24/2021] [Accepted: 04/26/2021] [Indexed: 11/16/2022]
Abstract
Global warming is a leading world issue driving the common social objective of reducing carbon emissions. People have witnessed the melting of ice and abrupt changes in climate. Reducing electricity usage is one possible method of slowing these changes. In recent decades, there have been massive worldwide rollouts of smart meters that automatically capture the total electricity usage of houses and buildings. Electricity load disaggregation (ELD) helps to break down total electricity usage into that of individual appliances. Studies have implemented ELD models based on various artificial intelligence techniques using a single ELD dataset. In this paper, a powerline noise transformation approach based on optimized complete ensemble empirical model decomposition and wavelet packet transform (OCEEMD-WPT) is proposed to merge the ELD datasets. The practical implications are that the method increases the size of training datasets and provides mutual benefits when utilizing datasets collected from other sources (especially from different countries). To reveal the effectiveness of the proposed method, it was compared with CEEMD-WPT (fixed controlled coefficients), standalone CEEMD, standalone WPT, and other existing works. The results show that the proposed approach improves the signal-to-noise ratio (SNR) significantly.
Collapse
|
10
|
Zhu H, He Z, Wei J, Wang J, Zhou H. Bearing Fault Feature Extraction and Fault Diagnosis Method Based on Feature Fusion. Sensors (Basel) 2021; 21:2524. [PMID: 33916563 DOI: 10.3390/s21072524] [Citation(s) in RCA: 23] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/10/2021] [Revised: 03/25/2021] [Accepted: 03/25/2021] [Indexed: 11/16/2022]
Abstract
Bearing is one of the most important parts of rotating machinery with high failure rate, and its working state directly affects the performance of the entire equipment. Hence, it is of great significance to diagnose bearing faults, which can contribute to guaranteeing running stability and maintenance, thus promoting production efficiency and economic benefits. Usually, the bearing fault features are difficult to extract effectively, which results in low diagnosis performance. To solve the problem, this paper proposes a bearing fault feature extraction method and it establishes a bearing fault diagnosis method that is based on feature fusion. The basic idea of the method is as follows: firstly, the time-frequency feature of the bearing signal is extracted through Wavelet Packet Transform (WPT) to form the time-frequency characteristic matrix of the signal; secondly, the Multi-Weight Singular Value Decomposition (MWSVD) is constructed by singular value contribution rate and entropy weight. The features of the time-frequency feature matrix obtained by WPT are further extracted, and the features that are sensitive to fault in the time-frequency feature matrix are retained while the insensitive features are removed; finally, the extracted feature matrix is used as the input of the Support Vector Machine (SVM) classifier for bearing fault diagnosis. The proposed method is validated by data sets from the time-varying bearing data from the University of Ottawa and Case Western Reserve University Bearing Data Center. The results show that the algorithm can effectively diagnose the bearing under the steady-state and unsteady state. This paper proposes that the algorithm has better fault diagnosis capabilities and feature extraction capabilities when compared with methods that aree based on traditional feature technology.
Collapse
|
11
|
Liu K, Zhang S, Li B, Zhang C, Liu B, Jin H, Zhao J. Faulty Feeder Identification Based on Data Analysis and Similarity Comparison for Flexible Grounding System in Electric Distribution Networks. Sensors (Basel) 2020; 21:s21010154. [PMID: 33383730 PMCID: PMC7795609 DOI: 10.3390/s21010154] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/02/2020] [Revised: 12/24/2020] [Accepted: 12/24/2020] [Indexed: 11/18/2022]
Abstract
Reliability and safety are the most important indicators in the electric system. When a ground fault occurs, the electrical equipment and personnel will be greatly threatened. Due to the zero-sequence voltage/current sensor networks applied in the system, the fault identification and diagnosis technology are developing rapidly, including the application of ground fault suppression. A flexible grounding system (FGS) is a new technology applied to arc extinguishing in medium and high voltage electric distribution networks. Its characteristic is that when the single-phase ground fault occurs, the power-electronic-based device is put into the electric system to compensate and suppress the ground point current to be close to zero in a very short time. In order to implement the above process, the corresponding faulty feeder identification method needs to meet the requirements of rapidity and accuracy. In this article, based on the real-time sampled data from the zero-sequence current/voltage sensors, an improved faulty feeder identification method combining wavelet packet transform (WPT) and grey T-type correlation degree is proposed, which features both accuracy and rapidity. The former is used to reconstruct the transient characteristic signal, and the latter is responsible for calculating and comparing the similarity of relative variation trend. Simulation results verify the rationality and effectiveness of the proposed method and analysis.
Collapse
Affiliation(s)
- Kangli Liu
- School of Electrical Engineering, Southeast University, Nanjing 210096, China; (S.Z.); (B.L.); (C.Z.); (B.L.); (H.J.); (J.Z.)
- Jiangsu Provincial Key Laboratory of Smart Grid Technology and Equipment, Nanjing 210096, China
- Correspondence:
| | - Sen Zhang
- School of Electrical Engineering, Southeast University, Nanjing 210096, China; (S.Z.); (B.L.); (C.Z.); (B.L.); (H.J.); (J.Z.)
| | - Baorun Li
- School of Electrical Engineering, Southeast University, Nanjing 210096, China; (S.Z.); (B.L.); (C.Z.); (B.L.); (H.J.); (J.Z.)
- State Grid Suqian Power Supply Company, Suqian 223800, China
| | - Chi Zhang
- School of Electrical Engineering, Southeast University, Nanjing 210096, China; (S.Z.); (B.L.); (C.Z.); (B.L.); (H.J.); (J.Z.)
| | - Biyang Liu
- School of Electrical Engineering, Southeast University, Nanjing 210096, China; (S.Z.); (B.L.); (C.Z.); (B.L.); (H.J.); (J.Z.)
| | - Hao Jin
- School of Electrical Engineering, Southeast University, Nanjing 210096, China; (S.Z.); (B.L.); (C.Z.); (B.L.); (H.J.); (J.Z.)
| | - Jianfeng Zhao
- School of Electrical Engineering, Southeast University, Nanjing 210096, China; (S.Z.); (B.L.); (C.Z.); (B.L.); (H.J.); (J.Z.)
| |
Collapse
|
12
|
Xiong S, Zhou H, He S, Zhang L, Xia Q, Xuan J, Shi T. A Novel End-To-End Fault Diagnosis Approach for Rolling Bearings by Integrating Wavelet Packet Transform into Convolutional Neural Network Structures. Sensors (Basel) 2020; 20:E4965. [PMID: 32887331 PMCID: PMC7506762 DOI: 10.3390/s20174965] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/05/2020] [Revised: 08/28/2020] [Accepted: 08/29/2020] [Indexed: 11/16/2022]
Abstract
Accidental failures of rotating machinery components such as rolling bearings may trigger the sudden breakdown of the whole manufacturing system, thus, fault diagnosis is vital in industry to avoid these massive economical costs and casualties. Since convolutional neural networks (CNN) are poor in extracting reliable features from original signal data, the time-frequency analysis method is usually called for to transform 1D signal into a 2D time-frequency coefficient matrix in which richer information could be exposed more easily. However, realistic fault diagnosis applications face a dilemma in that signal time-frequency analysis and fault classification cannot be implemented together, which means manual signal conversion work is also needed, which reduces the integrity and robustness of the fault diagnosis method. In this paper, a novel network named WPT-CNN is proposed for end-to-end intelligent fault diagnosis of rolling bearings. WPT-CNN creatively uses the standard deep neural network structure to realize the wavelet packet transform (WPT) time-frequency analysis function, which seamlessly integrates fault diagnosis domain knowledge into deep learning algorithms. The overall network architecture can be trained with gradient descent backpropagation algorithms, indicating that the time-frequency analysis module of WPT-CNN is also able to learn the dataset characteristics, adaptively representing signal information in the most suitable way. Two experimental rolling bearing fault datasets were used to validate the proposed method. Testing results showed that WPT-CNN obtained the testing accuracies of 99.73% and 99.89%, respectively, in two datasets, which exhibited a better and more reliable diagnosis performance than any other existing deep learning and machine learning methods.
Collapse
Affiliation(s)
- Shoucong Xiong
- School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China; (S.X.); (S.H.); (L.Z.); (Q.X.); (J.X.)
| | - Hongdi Zhou
- School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China;
| | - Shuai He
- School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China; (S.X.); (S.H.); (L.Z.); (Q.X.); (J.X.)
| | - Leilei Zhang
- School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China; (S.X.); (S.H.); (L.Z.); (Q.X.); (J.X.)
| | - Qi Xia
- School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China; (S.X.); (S.H.); (L.Z.); (Q.X.); (J.X.)
| | - Jianping Xuan
- School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China; (S.X.); (S.H.); (L.Z.); (Q.X.); (J.X.)
| | - Tielin Shi
- School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China; (S.X.); (S.H.); (L.Z.); (Q.X.); (J.X.)
| |
Collapse
|
13
|
Gómez MJ, Castejón C, Corral E, García-Prada JC. Railway Axle Condition Monitoring Technique Based on Wavelet Packet Transform Features and Support Vector Machines. Sensors (Basel) 2020; 20:s20123575. [PMID: 32599845 PMCID: PMC7348915 DOI: 10.3390/s20123575] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/21/2020] [Revised: 06/16/2020] [Accepted: 06/19/2020] [Indexed: 11/16/2022]
Abstract
Railway axles are critical to the safety of railway vehicles. However, railway axle maintenance is currently based on scheduled preventive maintenance using Nondestructive Testing. The use of condition monitoring techniques would provide information about the status of the axle between periodical inspections, and it would be very valuable in the prevention of catastrophic failures. Nevertheless, in the literature, there are not many studies focusing on this area and there is a lack of experimental data. In this work, a reliable real-time condition-monitoring technique for railway axles is proposed. The technique was validated using vibration measurements obtained at the axle boxes of a full bogie installed on a rig, where four different cracked railway axles were tested. The technique is based on vibration analysis by means of the Wavelet Packet Transform (WPT) energy, combined with a Support Vector Machine (SVM) diagnosis model. In all cases, it was observed that the WPT energy of the vibration signals at the first natural frequency of the axle when the wheelset is first installed (the healthy condition) increases when a crack is artificially created. An SVM diagnosis model based on the WPT energy at this frequency demonstrates good reliability, with a false alarm rate of lower than 10% and defect detection for damage occurring in more than 6.5% of the section in more than 90% of the cases. The minimum number of wheelsets required to build a general model to avoid mounting effects, among others things, is also discussed.
Collapse
Affiliation(s)
- María Jesús Gómez
- Mechanical Department, Universidad Carlos III de Madrid (UC3M), 28982 Leganés, Spain; (C.C.); (E.C.)
- Correspondence: ; Tel.: +34-91-624-8380
| | - Cristina Castejón
- Mechanical Department, Universidad Carlos III de Madrid (UC3M), 28982 Leganés, Spain; (C.C.); (E.C.)
| | - Eduardo Corral
- Mechanical Department, Universidad Carlos III de Madrid (UC3M), 28982 Leganés, Spain; (C.C.); (E.C.)
| | - Juan Carlos García-Prada
- Mechanical Department, Universidad Nacional de Education a Distancia (UNED), 28040 Madrid, Spain;
| |
Collapse
|
14
|
Sun XT, Li D, He WY, Wang ZC, Ren WX. Grouting Quality Evaluation in Post-Tensioning Tendon Ducts Using Wavelet Packet Transform and Bayes Classifier. Sensors (Basel) 2019; 19:s19245372. [PMID: 31817484 PMCID: PMC6960984 DOI: 10.3390/s19245372] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/31/2019] [Revised: 11/30/2019] [Accepted: 12/02/2019] [Indexed: 12/04/2022]
Abstract
The grouting quality of tendon ducts is very important for post-tensioning technology in order to protect the prestressing reinforcement from environmental corrosion and to make a smooth stress distribution. Unfortunately, various grouting defects occur in practice, and there is no efficient method to evaluate grouting compactness yet. In this study, a method based on wavelet packet transform (WPT) and Bayes classifier was proposed to evaluate grouting conditions using stress waves generated and received by piezoelectric transducers. Six typical grouting conditions with both partial grouting and cavity defects of different dimensions were experimentally investigated. The WPT was applied to explore the energy of received stress waves at multi-scales. After that, the Bayes classifier was employed to identify the grouting conditions, by taking the traditionally used total energy and the proposed energy vector of WPT components as input, respectively. The experimental results demonstrated that the Bayes classifier input with the energy vector could identify different grouting conditions more accurately. The proposed method has the potential to be applied at key spots of post-tensioning tendon ducts in practice.
Collapse
|
15
|
Uyulan C, Ergüzel TT, Tarhan N. Entropy-based feature extraction technique in conjunction with wavelet packet transform for multi-mental task classification. BIOMED ENG-BIOMED TE 2019; 64:529-542. [PMID: 30849042 DOI: 10.1515/bmt-2018-0105] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/10/2018] [Accepted: 12/05/2018] [Indexed: 11/15/2022]
Abstract
Event-related mental task information collected from electroencephalography (EEG) signals, which are functionally related to different brain areas, possesses complex and non-stationary signal features. It is essential to be able to classify mental task information through the use in brain-computer interface (BCI) applications. This paper proposes a wavelet packet transform (WPT) technique merged with a specific entropy biomarker as a feature extraction tool to classify six mental tasks. First, the data were collected from a healthy control group and the multi-signal information comprised six mental tasks which were decomposed into a number of subspaces spread over a wide frequency spectrum by projecting six different wavelet basis functions. Later, the decomposed subspaces were subjected to three entropy-type statistical measure functions to extract the feature vectors for each mental task to be fed into a backpropagation time-recurrent neural network (BPTT-RNN) model. Cross-validated classification results demonstrated that the model could classify with 85% accuracy through a discrete Meyer basis function coupled with a Renyi entropy biomarker. The classifier model was finally tested in the Simulink platform to demonstrate the Fourier series representation of periodic signals by tracking the harmonic pattern. In order to boost the model performance, ant colony optimization (ACO)-based feature selection method was employed. The overall accuracy increased to 88.98%. The results underlined that the WPT combined with an entropy uncertainty measure methodology is both effective and versatile to discriminate the features of the signal localized in a time-frequency domain.
Collapse
Affiliation(s)
- Caglar Uyulan
- Department of Mechatronics Engineering, Bulent Ecevit University, Zonguldak, Turkey
| | - Türker Tekin Ergüzel
- Department of Software Engineering, Uskudar University, Altunizade, Haluk Turksory Street, No: 14, 34662 Uskudar/Istanbul, Turkey
| | - Nevzat Tarhan
- Department of Psychology, Uskudar University, Istanbul, Turkey
| |
Collapse
|
16
|
Jin H, Titus A, Liu Y, Wang Y, Han Z. Fault Diagnosis of Rotary Parts of a Heavy-Duty Horizontal Lathe Based on Wavelet Packet Transform and Support Vector Machine. Sensors (Basel) 2019; 19:s19194069. [PMID: 31547146 PMCID: PMC6806313 DOI: 10.3390/s19194069] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/19/2019] [Revised: 09/10/2019] [Accepted: 09/13/2019] [Indexed: 01/26/2023]
Abstract
The spindle box is responsible for power transmission, supporting the rotating parts and ensuring the rotary accuracy of the workpiece in the heavy-duty machine tool. Its assembly quality is crucial to ensure the reliable power supply and stable operation of the machine tool in the process of large load and cutting force. Therefore, accurate diagnosis of assembly faults is of great significance for improving assembly efficiency and ensuring outgoing quality. In this paper, the common fault types and characteristics of the spindle box of heavy horizontal lathe are analyzed first, and original vibration signals of various fault types are collected. The wavelet packet is used to decompose the signal into different frequency bands and reconstruct the nodes in the frequency band where the characteristic frequency points are located. Then, the power spectrum analysis is carried out on the reconstructed signal, so that the fault features in the signal can be clearly expressed. The structure of the feature vector used for fault diagnosis is analyzed and the feature vector is extracted from the collected signals. Finally, the intelligent pattern recognition method based on support vector machine is used to classify the fault types. The results show that the method proposed in this paper can quickly and accurately judge the fault types.
Collapse
Affiliation(s)
- Hongyu Jin
- School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China; (H.J.); (A.T.); (Y.L.); (Y.W.)
| | - Avitus Titus
- School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China; (H.J.); (A.T.); (Y.L.); (Y.W.)
- Department of Engineering Sciences and Technology, Sokoine University of Agriculture, Morogoro 255, Tanzania
| | - Yulong Liu
- School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China; (H.J.); (A.T.); (Y.L.); (Y.W.)
| | - Yang Wang
- School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China; (H.J.); (A.T.); (Y.L.); (Y.W.)
| | - Zhenyu Han
- School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China; (H.J.); (A.T.); (Y.L.); (Y.W.)
- Correspondence:
| |
Collapse
|
17
|
Amin MN, Rushdi MA, Marzaban RN, Yosry A, Kim K, Mahmoud AM. Wavelet-based Computationally-Efficient Computer-Aided Characterization of Liver Steatosis using Conventional B-mode Ultrasound Images. Biomed Signal Process Control 2019; 52:84-96. [PMID: 31983924 PMCID: PMC6980471 DOI: 10.1016/j.bspc.2019.03.010] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Hepatic steatosis occurs when lipids accumulate in the liver leading to steatohepatitis, which can evolve into cirrhosis and consequently may end with hepatocellular carcinoma. Several automatic classification algorithms have been proposed to detect liver diseases. However, some algorithms are manufacturer-dependent, while others require extensive calculations and consequently prolonged computational time. This may limit the development of real-time and manufacturer-independent computer-aided detection of liver steatosis. This work demonstrates the feasibility of a computationally-efficient and manufacturer-independent wavelet-based computer-aided liver steatosis detection system using conventional B-mode ultrasound (US) imaging. Seven features were extracted from the approximation part of the second-level wavelet packet transform (WPT) of US images. The proposed technique was tested on two datasets of ex-vivo mice livers with and without gelatin embedding, in addition to a third dataset of in-vivo human livers acquired using two different US machines. Using the gelatin-embedded mice liver dataset, the technique exhibited 98.8% accuracy, 97.8% sensitivity, and 100% specificity, and the frame classification time was reduced from 0.4814 s using original US images to 0.1444 s after WPT preprocessing. When the other mice liver dataset was used, the technique showed 85.74% accuracy, 84.4% sensitivity, and 88.5% specificity, and the frame classification time was reduced from 0.5612s to 0.2903 s. Using human liver image data, the best classifier exhibited 92.5% accuracy, 93.0% sensitivity, 91.0% specificity, and the classification time was reduced from 0.660 s to 0.146 s. This technique can be useful for developing computationally-efficient and manufacturer-independent noninvasive CAD systems for fatty liver detection.
Collapse
Affiliation(s)
- Manar N Amin
- Department of Biomedical Engineering and Systems, Cairo University, Giza 12613, Egypt
| | - Muhammad A Rushdi
- Department of Biomedical Engineering and Systems, Cairo University, Giza 12613, Egypt
| | - Raghda N Marzaban
- Endemic Medicine Department and Liver Unit, Faculty of Medicine, Cairo University, Giza 11652, Egypt
| | - Ayman Yosry
- Endemic Medicine Department and Liver Unit, Faculty of Medicine, Cairo University, Giza 11652, Egypt
| | - Kang Kim
- Department of Medicine, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, USA
- Department of Bioengineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, USA
- McGowan Institute for Regenerative Medicine, University of Pittsburgh and UPMC, Pittsburgh, Pennsylvania 15219, USA
| | - Ahmed M Mahmoud
- Department of Biomedical Engineering and Systems, Cairo University, Giza 12613, Egypt
| |
Collapse
|
18
|
Ma S, Cai W, Liu W, Shang Z, Liu G. A Lighted Deep Convolutional Neural Network Based Fault Diagnosis of Rotating Machinery. Sensors (Basel) 2019; 19:E2381. [PMID: 31137616 PMCID: PMC6566980 DOI: 10.3390/s19102381] [Citation(s) in RCA: 36] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/23/2019] [Revised: 05/17/2019] [Accepted: 05/21/2019] [Indexed: 12/04/2022]
Abstract
To improve the fault diagnosis performance for rotating machinery, an efficient, noise-resistant end-to-end deep learning (DL) algorithm is proposed based on the advantages of the wavelet packet transform in vibration signal processing (the capability to extract multiscale information and more spectral distribution features) and deep convolutional neural networks (good classification performance, data-driven design and high transfer-learning ability). First, a vibration signal is subjected to pyramid wavelet packet decomposition, and each sub-band coefficient is used as the input for each channel of a deep convolutional network (DCN). Then, based on the lightweight modeling requirements and techniques, a new DCN structure is designed for the fault diagnosis. The proposed algorithm is compared with the support vector machine algorithm and the published DL algorithms based on a bearing dataset produced by Case Western Reserve University. The experimental results show that the proposed algorithm is superior to the existing algorithms in terms of accuracy, memory space, computational complexity, noise resistance, and transfer performance, producing good results.
Collapse
Affiliation(s)
- Shangjun Ma
- Shaanxi Engineering Laboratory for Transmissions and Controls, Northwestern Polytechnical University, Xi'an 710072, China.
| | - Wei Cai
- Shaanxi Engineering Laboratory for Transmissions and Controls, Northwestern Polytechnical University, Xi'an 710072, China.
| | - Wenkai Liu
- Key Laboratory of Dependable Service Computing in Cyber Physical Society Chongqing University, Chongqing 400044, China.
| | - Zhaowei Shang
- Key Laboratory of Dependable Service Computing in Cyber Physical Society Chongqing University, Chongqing 400044, China.
| | - Geng Liu
- Shaanxi Engineering Laboratory for Transmissions and Controls, Northwestern Polytechnical University, Xi'an 710072, China.
| |
Collapse
|
19
|
Billings JCW, Thompson GJ, Pan WJ, Magnuson ME, Medda A, Keilholz S. Disentangling Multispectral Functional Connectivity With Wavelets. Front Neurosci 2018; 12:812. [PMID: 30459548 PMCID: PMC6232345 DOI: 10.3389/fnins.2018.00812] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/31/2018] [Accepted: 10/18/2018] [Indexed: 02/01/2023] Open
Abstract
The field of brain connectomics develops our understanding of the brain's intrinsic organization by characterizing trends in spontaneous brain activity. Linear correlations in spontaneous blood-oxygen level dependent functional magnetic resonance imaging (BOLD-fMRI) fluctuations are often used as measures of functional connectivity (FC), that is, as a quantity describing how similarly two brain regions behave over time. Given the natural spectral scaling of BOLD-fMRI signals, it may be useful to represent BOLD-fMRI as multiple processes occurring over multiple scales. The wavelet domain presents a transform space well suited to the examination of multiscale systems as the wavelet basis set is constructed from a self-similar rescaling of a time and frequency delimited kernel. In the present study, we utilize wavelet transforms to examine fluctuations in whole-brain BOLD-fMRI connectivity as a function of wavelet spectral scale in a sample (N = 31) of resting healthy human volunteers. Information theoretic criteria measure relatedness between spectrally-delimited FC graphs. Voxelwise comparisons of between-spectra graph structures illustrate the development of preferential functional networks across spectral bands.
Collapse
Affiliation(s)
- Jacob C W Billings
- Graduate Division of Biological and Biomedical Sciences - Program in Neuroscience, Emory University, Atlanta, GA, United States.,Biomedical Engineering, Georgia Institute of Technology and Emory University, Atlanta, GA, United States
| | - Garth J Thompson
- Biomedical Engineering, Georgia Institute of Technology and Emory University, Atlanta, GA, United States.,iHuman Institute, ShanghaiTech University, Pudong, China
| | - Wen-Ju Pan
- Biomedical Engineering, Georgia Institute of Technology and Emory University, Atlanta, GA, United States
| | - Matthew E Magnuson
- Biomedical Engineering, Georgia Institute of Technology and Emory University, Atlanta, GA, United States
| | - Alessio Medda
- Aerospace Transportation and Advanced Systems, Georgia Tech Research Institute, Atlanta, GA, United States
| | - Shella Keilholz
- Graduate Division of Biological and Biomedical Sciences - Program in Neuroscience, Emory University, Atlanta, GA, United States.,Biomedical Engineering, Georgia Institute of Technology and Emory University, Atlanta, GA, United States
| |
Collapse
|
20
|
Duong BP, Khan SA, Shon D, Im K, Park J, Lim DS, Jang B, Kim JM. A Reliable Health Indicator for Fault Prognosis of Bearings. Sensors (Basel) 2018; 18:E3740. [PMID: 30400203 DOI: 10.3390/s18113740] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/01/2018] [Revised: 10/27/2018] [Accepted: 10/30/2018] [Indexed: 11/17/2022]
Abstract
Estimation of the remaining useful life (RUL) of bearings is important to avoid abrupt shutdowns in rotary machines. An important task in RUL estimation is the construction of a suitable health indicator (HI) to infer the bearing condition. Conventional health indicators rely on features of the vibration acceleration signal and are predominantly calculated without considering its non-stationary nature. This often results in an HI with a trend that is difficult to model, as well as random fluctuations and poor correlation with bearing degradation. Therefore, this paper presents a method for constructing a bearing’s HI by considering the non-stationarity of the vibration acceleration signals. The proposed method employs the discrete wavelet packet transform (DWPT) to decompose the raw signal into different sub-bands. The HI is extracted from each sub-band signal, smoothened using locally weighted regression, and evaluated using a gradient-based method. The HIs showing the best trends among all the sub-bands are iteratively accumulated to construct an HI with the best trend over the entire life of the bearing. The proposed method is tested on two benchmark bearing datasets. The results show that the proposed method yields an HI that correlates well with bearing degradation and is relatively easy to model.
Collapse
|
21
|
Mao L, Jackson L. Effect of Sensor Set Size on Polymer Electrolyte Membrane Fuel Cell Fault Diagnosis. Sensors (Basel) 2018; 18:E2777. [PMID: 30142950 DOI: 10.3390/s18092777] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/26/2018] [Revised: 08/14/2018] [Accepted: 08/21/2018] [Indexed: 11/17/2022]
Abstract
This paper presents a comparative study on the performance of different sizes of sensor sets on polymer electrolyte membrane (PEM) fuel cell fault diagnosis. The effectiveness of three sizes of sensor sets, including fuel cell voltage only, all the available sensors, and selected optimal sensors in detecting and isolating fuel cell faults (e.g., cell flooding and membrane dehydration) are investigated using the test data from a PEM fuel cell system. Wavelet packet transform and kernel principal component analysis are employed to reduce the dimensions of the dataset and extract features for state classification. Results demonstrate that the selected optimal sensors can provide the best diagnostic performance, where different fuel cell faults can be detected and isolated with good quality.
Collapse
|
22
|
Han S, Wu Q, Sun L, Qiu X, Ren H, Lu Z. [Recognition of fatigue status of pilots based on deep contractive auto-encoding network]. Sheng Wu Yi Xue Gong Cheng Xue Za Zhi 2018; 35:443-451. [PMID: 29938954 DOI: 10.7507/1001-5515.201701018] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
Abstract
We proposed a new deep learning model by analyzing electroencephalogram signals to reduce the complexity of feature extraction and improve the accuracy of recognition of fatigue status of pilots. For one thing, we applied wavelet packet transform to decompose electroencephalogram signals of pilots to extract the δ wave (0.4-3 Hz), θ wave (4-7 Hz), α wave (8-13 Hz) and β wave (14-30 Hz), and the combination of them was used as de-nosing electroencephalogram signals. For another, we proposed a deep contractive auto-encoding network-Softmax model for identifying pilots' fatigue status. Its recognition results were also compared with other models. The experimental results showed that the proposed deep learning model had a nice recognition, and the accuracy of recognition was up to 91.67%. Therefore, recognition of fatigue status of pilots based on deep contractive auto-encoding network is of great significance.
Collapse
Affiliation(s)
- Shuang Han
- Department of Automation, Shanghai Jiao Tong University, Shanghai 200240,
| | - Qi Wu
- Department of Automation, Shanghai Jiao Tong University, Shanghai 200240, P.R.China
| | - Libing Sun
- Shanghai Securtech Information Technology Co., ltd. Shanghai 200240, P.R.China
| | - Xuyi Qiu
- Chinese Aeronautical Radio Electronics Research Institute, Shanghai 200240, P.R.China
| | - He Ren
- Shanghai Engineering Research Center of Civil Aircraft Health Monitoring, Shanghai 200240, P.R.China
| | - Zhao Lu
- Department of Electrical Engineering, Tuskegee University, Tuskegee, AL 36088, USA
| |
Collapse
|
23
|
Wang X, Shi T, Liao G, Zhang Y, Hong Y, Chen K. Using Wavelet Packet Transform for Surface Roughness Evaluation and Texture Extraction. Sensors (Basel) 2017; 17:E933. [PMID: 28441749 DOI: 10.3390/s17040933] [Citation(s) in RCA: 33] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/12/2017] [Revised: 04/18/2017] [Accepted: 04/19/2017] [Indexed: 11/16/2022]
Abstract
Surface characterization plays a significant role in evaluating surface functional performance. In this paper, we introduce wavelet packet transform for surface roughness characterization and surface texture extraction. Surface topography is acquired by a confocal laser scanning microscope. Smooth border padding and de-noise process are implemented to generate a roughness surface precisely. By analyzing the high frequency components of a simulated profile, surface textures are separated by using wavelet packet transform, and the reconstructed roughness and waviness coincide well with the original ones. Wavelet packet transform is then used as a smooth filter for texture extraction. A roughness specimen and three real engineering surfaces are also analyzed in detail. Profile and areal roughness parameters are calculated to quantify the characterization results and compared with those measured by a profile meter. Most obtained roughness parameters agree well with the measurement results, and the largest deviation occurs in the skewness. The relations between the roughness parameters and noise are analyzed by simulation for explaining the relatively large deviations. The extracted textures reflect the surface structure and indicate the manufacturing conditions well, which is helpful for further feature recognition and matching. By using wavelet packet transform, engineering surfaces are comprehensively characterized including evaluating surface roughness and extracting surface texture.
Collapse
|
24
|
Wang D, Zhang X, Gao X, Chen X, Zhou P. Wavelet Packet Feature Assessment for High-Density Myoelectric Pattern Recognition and Channel Selection toward Stroke Rehabilitation. Front Neurol 2016; 7:197. [PMID: 27917149 PMCID: PMC5116463 DOI: 10.3389/fneur.2016.00197] [Citation(s) in RCA: 18] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2016] [Accepted: 10/25/2016] [Indexed: 12/03/2022] Open
Abstract
This study presents wavelet packet feature assessment of neural control information in paretic upper limb muscles of stroke survivors for myoelectric pattern recognition, taking advantage of high-resolution time–frequency representations of surface electromyogram (EMG) signals. On this basis, a novel channel selection method was developed by combining the Fisher’s class separability index and the sequential feedforward selection analyses, in order to determine a small number of appropriate EMG channels from original high-density EMG electrode array. The advantages of the wavelet packet features and the channel selection analyses were further illustrated by comparing with previous conventional approaches, in terms of classification performance when identifying 20 functional arm/hand movements implemented by 12 stroke survivors. This study offers a practical approach including paretic EMG feature extraction and channel selection that enables active myoelectric control of multiple degrees of freedom with paretic muscles. All these efforts will facilitate upper limb dexterity restoration and improved stroke rehabilitation.
Collapse
Affiliation(s)
- Dongqing Wang
- Department of Electronic Science and Technology, University of Science and Technology of China , Hefei , China
| | - Xu Zhang
- Department of Electronic Science and Technology, University of Science and Technology of China , Hefei , China
| | - Xiaoping Gao
- Department of Rehabilitation Medicine, First Affiliated Hospital of Anhui Medical University , Hefei , China
| | - Xiang Chen
- Department of Electronic Science and Technology, University of Science and Technology of China , Hefei , China
| | - Ping Zhou
- Department of Physical Medicine and Rehabilitation, University of Texas Health Science Center at Houston, Houston, TX, USA; TIRR Memorial Hermann Research Center, Houston, TX, USA; Guangdong Work Injury Rehabilitation Center, Guangzhou, China
| |
Collapse
|
25
|
Abou-Abbas L, Tadj C, Gargour C, Montazeri L. Expiratory and Inspiratory Cries Detection Using Different Signals' Decomposition Techniques. J Voice 2016; 31:259.e13-259.e28. [PMID: 27567394 PMCID: PMC6344782 DOI: 10.1016/j.jvoice.2016.05.015] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2016] [Revised: 05/19/2016] [Accepted: 05/24/2016] [Indexed: 12/02/2022]
Abstract
This paper addresses the problem of automatic cry signal segmentation for the purposes of infant cry analysis. The main goal is to automatically detect expiratory and inspiratory phases from recorded cry signals. The approach used in this paper is made up of three stages: signal decomposition, features extraction, and classification. In the first stage, short-time Fourier transform, empirical mode decomposition (EMD), and wavelet packet transform have been considered. In the second stage, various set of features have been extracted, and in the third stage, two supervised learning methods, Gaussian mixture models and hidden Markov models, with four and five states, have been discussed as well. The main goal of this work is to investigate the EMD performance and to compare it with the other standard decomposition techniques. A combination of two and three intrinsic mode functions (IMFs) that resulted from EMD has been used to represent cry signal. The performance of nine different segmentation systems has been evaluated. The experiments for each system have been repeated several times with different training and testing datasets, randomly chosen using a 10-fold cross-validation procedure. The lowest global classification error rates of around 8.9% and 11.06% have been achieved using a Gaussian mixture models classifier and a hidden Markov models classifier, respectively. Among all IMF combinations, the winner combination is IMF3+IMF4+IMF5.
Collapse
Affiliation(s)
- Lina Abou-Abbas
- Electrical Engineering Department, École de Technologie Supérieure, Montreal, Canada.
| | - Chakib Tadj
- Electrical Engineering Department, École de Technologie Supérieure, Montreal, Canada
| | - Christian Gargour
- Electrical Engineering Department, École de Technologie Supérieure, Montreal, Canada
| | - Leila Montazeri
- Electrical Engineering Department, Polytechnique Montreal, Canada
| |
Collapse
|
26
|
Owjimehr M, Danyali H, Helfroush MS. An improved method for liver diseases detection by ultrasound image analysis. J Med Signals Sens 2015; 5:21-9. [PMID: 25709938 PMCID: PMC4335142] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/01/2014] [Accepted: 11/06/2014] [Indexed: 10/28/2022]
Abstract
Ultrasound imaging is a popular and noninvasive tool frequently used in the diagnoses of liver diseases. A system to characterize normal, fatty and heterogeneous liver, using textural analysis of liver Ultrasound images, is proposed in this paper. The proposed approach is able to select the optimum regions of interest of the liver images. These optimum regions of interests are analyzed by two level wavelet packet transform to extract some statistical features, namely, median, standard deviation, and interquartile range. Discrimination between heterogeneous, fatty and normal livers is performed in a hierarchical approach in the classification stage. This stage, first, classifies focal and diffused livers and then distinguishes between fatty and normal ones. Support vector machine and k-nearest neighbor classifiers have been used to classify the images into three groups, and their performance is compared. The Support vector machine classifier outperformed the compared classifier, attaining an overall accuracy of 97.9%, with a sensitivity of 100%, 100% and 95.1% for the heterogeneous, fatty and normal class, respectively. The Acc obtained by the proposed computer-aided diagnostic system is quite promising and suggests that the proposed system can be used in a clinical environment to support radiologists and experts in liver diseases interpretation.
Collapse
Affiliation(s)
- Mehri Owjimehr
- Department of Electrical and Electronics Engineering, Shiraz University of Technology, Shiraz, Iran,Address for correspondence: Ms. Mehri Owjimehr, Department of Electrical and Electronics Engineering, Shiraz University of Technology, Shiraz, Iran. E-mail:
| | - Habibollah Danyali
- Department of Electrical and Electronics Engineering, Shiraz University of Technology, Shiraz, Iran
| | | |
Collapse
|
27
|
Jiang L, Liu F, He Y. A non-destructive distinctive method for discrimination of automobile lubricant variety by visible and short-wave infrared spectroscopy. Sensors (Basel) 2012; 12:3498-511. [PMID: 22737021 DOI: 10.3390/s120303498] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/06/2012] [Revised: 02/27/2012] [Accepted: 03/05/2012] [Indexed: 11/25/2022]
Abstract
A novel method which is a combination of wavelet packet transform (WPT), uninformative variable elimination by partial least squares (UVE-PLS) and simulated annealing (SA) to extract best variance information among different varieties of lubricants is presented. A total of 180 samples (60 for each variety) were characterized on the basis of visible and short-wave infrared spectroscopy (VIS-SWNIR), and 90 samples (30 for each variety) were randomly selected for the calibration set, whereas, the remaining 90 samples (30 for each variety) were used for the validation set. The spectral data was split into different frequency bands by WPT, and different frequency bands were obtained. SA was employed to look for the best variance band (BVB) among different varieties of lubricants. In order to improve prediction precision further, BVB was processed by UVE-PLS and the optimal cutoff threshold of UVE was found by SA. Finally, five variables were mined, and were set as inputs for a least square-support vector machine (LS-SVM) to build the recognition model. An optimal model with a correlation coefficient (R) of 0.9850 and root mean square error of prediction (RMSEP) of 0.0827 was obtained. The overall results indicated that the method of combining WPT, UVE-PLS and SA was a powerful way to select diagnostic information for discrimination among different varieties of lubricating oil, furthermore, a more parsimonious and efficient LS-SVM model could be obtained.
Collapse
|