Ab Initio Uncertainty Quantification of Neutrinoless Double-Beta Decay in ^{76}Ge

The observation of neutrinoless double-beta (0νββ) decay would offer proof of lepton number violation, demonstrating that neutrinos are Majorana particles, while also helping us understand why there is more matter than antimatter in the Universe. If the decay is driven by the exchange of the three known light neutrinos, a discovery would, in addition, link the observed decay rate to the neutrino mass scale through a theoretical quantity known as the nuclear matrix element (NME). Accurate values of the NMEs for all nuclei considered for use in 0νββ experiments are therefore crucial for designing and interpreting those experiments. Here, we report the first comprehensive ab initio uncertainty quantification of the 0νββ-decay NME, in the key nucleus ^{76}Ge. Our method employs nuclear strong and weak interactions derived within chiral effective field theory and recently developed many-body emulators. Our result, with a conservative treatment of uncertainty, is an NME of 2.60_{-1.36}^{+1.28}, which, together with the best-existing half-life sensitivity and phase-space factor, sets an upper limit for effective neutrino mass of 187_{-62}^{+205}  meV. The result is important for designing next-generation germanium detectors aiming to cover the entire inverted hierarchy region of neutrino masses.

EURADOS ISO/IEC 17025 guidance for IMS: suggestions on how to interpret and implement the requirements including examples from accredited laboratories

Individual monitoring of external radiation is an activity usually regulated by national regulatory bodies in most countries. Regulations generally contain technical requirements to be met by the individual monitoring services (IMS), in order to ensure that the measurements are correct and therefore the dosimetry results are reliable. In some countries, the requirements include or even consist of the accreditation of the service according to the standard ISO/IEC 17025: 'General requirements for the competence of testing and calibration laboratories.' It is a fact that accreditation is a growing trend among European IMS as a way to guarantee confidence in their technical competence. The acceptance of the dosimetry results between countries and their indentation in the respective National Dose Registries is facilitated if laboratories conform to the ISO/IEC 17025 standard. In the framework of the activities of EURADOS (European Radiation Dosimetry Group) working group 2 'Harmonization of Individual Monitoring in Europe' and attending to the concern of many European IMS in the process of accreditation, a guide has been prepared. The purpose was to assist and encourage IMS to apply for accreditation and to share the authors' own experience with the process. The guide intends to be a practical reference for IMS on how to interpret and implement the ISO/IEC 17025 requirements to the specific activity of a personal dosimetry service for external radiation, emphasizing those aspects of special interest. It includes examples from dosimetry laboratories already accredited. The major novelties from a new edition of ISO/IEC 17025: 2017 are also identified in the guide. Finally, the guide aims to assist the auditing process, giving examples of auditor's questions and how to show evidence of compliance. The main findings are presented.

Nuclear shell-model simulation in digital quantum computers

The nuclear shell model is one of the prime many-body methods to study the structure of atomic nuclei, but it is hampered by an exponential scaling on the basis size as the number of particles increases. We present a shell-model quantum circuit design strategy to find nuclear ground states by exploiting an adaptive variational quantum eigensolver algorithm. Our circuit implementation is in excellent agreement with classical shell-model simulations for a dozen of light and medium-mass nuclei, including neon and calcium isotopes. We quantify the circuit depth, width and number of gates to encode realistic shell-model wavefunctions. Our strategy also addresses explicitly energy measurements and the required number of circuits to perform them. Our simulated circuits approach the benchmark results exponentially with a polynomial scaling in quantum resources for each nucleus. This work paves the way for quantum computing shell-model studies across the nuclear chart and our quantum resource quantification may be used in configuration-interaction calculations of other fermionic systems.

Early and late contrast enhancing lesions after photon radiotherapy for IDH mutated grade 2 diffuse glioma

OBJECTIVE

The interpretation of new enhancing lesions after radiotherapy for diffuse glioma remains a clinical challenge. We sought to characterize and classify new contrast enhancing lesions in a historical multicenter cohort of patients with IDH mutated grade 2 diffuse glioma treated with photon therapy.

METHODS

We reviewed all follow-up MRI's of all patients treated with radiotherapy for histologically confirmed, IDH mutated diffuse grade 2 glioma between 1-1-2007 and 31-12-2018 in two tertiary referral centers. Disease progression (PD) was defined in accordance with the RANO criteria for progressive disease in low grade glioma. Pseudoprogression (psPD) was defined as any transient contrast-enhancing lesion between the end of radiotherapy and PD, or any new contrast-enhancing lesion that remained stable over a period of 12 months in patients who did not exhibit PD.

RESULTS

A total of 860 MRI's of 106 patients were reviewed. psPD was identified in 24 patients (23%) on 76 MRI's. The cumulative incidence of psPD was 13% at 1 year, 22% at 5 years, and 28% at 10 years. The mean of the observed maximal volume of psPD was 2.4cc. The median Dmin in psPD lesions was 50.1 Gy. The presence of an 1p/19q codeletion was associated with an increased risk of psPD (subhazard ratio 2.34, p=0.048). psPD was asymptomatic in 83% of patients.

CONCLUSION

The cumulative incidence of psPD in grade 2 diffuse glioma increases over time. Consensus regarding event definition and statistical analysis is needed for comparisons between series investigating psPD.

Tolerance to ozone might impose restrictions to plant disease management in tomato

Tropospheric ozone (O₃ ) is considered a major air pollutant having negative effects on plant growth and productivity. Background concentrations are expected to rise in several regions of the world in the next 50 years, affecting plant responses to diseases, thus requiring new management strategies for food production. The effects of elevated O₃ on the severity of a bacterial disease, and the effectiveness of a chemical defence inducer, were examined in two cultivars of tomato, Roma and Moneymaker, which present different tolerance to this pollutant. The two cultivars differ in their ability to produce and accumulate reactive oxygen species (ROS) in leaf tissues. Tomato plants were challenged with a strain of Xanthomonas vesicatoria, Xv9, which is pathogenic on tomato. Ozone consistently increased severity of the disease by over 40% in both cultivars. In the more tolerant cultivar, O₃ pollution increased disease intensity, even after applying a commercially available product to enhance resistance (acibenzolar-S-methyl, BTH). In the more susceptible cultivar, level of disease attained depended on the oxidative balance that resulted from other stress factors. The antioxidant capacity of the plant at the time of infection was relevant for controlling development of the disease. Our results suggest that development of O₃ tolerance in commercial crops might impose a penalty cost in terms of disease management under projected higher O₃ concentrations.

Thermoluminescence glow curve deconvolution for discrete and continuous trap distributions

Deconvolution analysis of the thermoluminiscent (TL) glow curves proved to be a good complementary method to characterize the individual glow peaks by fitting their kinetic parameters. In this work, new software has been developed for the automatic deconvolution of TL glow curves, assuming either discrete or continuous distribution of trapping centres. The guess estimation of the kinetic parameters is done automatically and can be manually modified, thus allowing the use of the software for routine, processing a large number of measurements, as well as for research purposes. The equations, the methods and the results of the first test are described in detail. The software has been developed by integrating Fortran code and Visual Studio tools to create a graphic easy-to-use environment and permits to obtain the fitted values for the parameters according to the considered model.

A SINGLE-EXPOSURE, MULTIDETECTOR NEUTRON SPECTROMETER FOR WORKPLACE MONITORING

This communication describes a recently developed single-exposure neutron spectrometer, based on multiple active thermal neutron detectors located within a moderating sphere, which have been developed jointly by CIEMAT (Spain), INFN (Italy) and Politecnico di Milano (Italy) in the framework of Italian and Spanish collaboration projects. The fabricated prototypes permit to achieve spectrometric resolution with nearly isotropic response for neutron with energies from thermal to 100-200 MeV, thus being able to characterise the complete neutron spectrum in only one exposure by unfolding the measured responses of the detectors. This makes it especially advantageous for characterising neutron fields and workplace monitoring purposes in neutron-producing facilities.

THE RESULTS OF THE EURADOS INTERCOMPARISON IC2014 FOR WHOLE-BODY DOSEMETERS IN PHOTON FIELDS

The European Dosimetry Group (EURADOS) first started performing international intercomparisons for whole-body dosemeters for individual monitoring services in 1998. Since 2008, these whole-body intercomparisons have been performed on a regular basis. In this latest intercomparison (IC2014), 96 monitoring services from 35 countries (mostly European) participated with 112 dosimetry systems. Unlike in the previous intercomparisons, the whole registration, communication and data exchange process was handled by a new on-line platform. All dosemeter irradiations were carried out in the Seibersdorf accredited dosimetry laboratory. The irradiation plan consisted of nine irradiation setups with five different photon radiation qualities (S-Cs, S-Co, RQR7, W-80 and W-150) and two different angles of radiation incidence (0° and 60°). The paper describes and analyses the individual results for the personal dose equivalent quantities Hp(10) and if requested, Hp(0.07), for all participating systems and compares these results with the ISO 14146 'trumpet curve' performance criteria. The results show that 100 systems (89 % of all systems) do fulfil the general ISO 14146 performance criteria. This paper gives an overview on the performance of the participating individual monitoring services and the influence of the dosemeter type on the observed response values.

CIEMAT EXTERNAL DOSIMETRY SERVICE: ISO/IEC 17025 ACCREDITATION AND 3 Y OF OPERATIONAL EXPERIENCE AS AN ACCREDITED LABORATORY

In 2008, the CIEMAT Radiation Dosimetry Service decided to implement a quality management system, in accordance with established requirements, in order to achieve ISO/IEC 17025 accreditation. Although the Service comprises the approved individual monitoring services of both external and internal radiation, this paper is specific to the actions taken by the External Dosimetry Service, including personal and environmental dosimetry laboratories, to gain accreditation and the reflections of 3 y of operational experience as an accredited laboratory.

EURADOS PROGRAMME OF INTERCOMPARISONS FOR INDIVIDUAL MONITORING SERVICES: SEVEN YEARS OF DEVELOPMENT AND FUTURE PLANS

In 2008 the European Radiation Dosimetry Group (EURADOS) started a new programme of intercomparisons for individual monitoring services (IMS). The aim was to provide the possibility to IMS in Europe to participate in dosimetry intercomparions with regular time intervals with all types of dosemeter systems that are used routinely to monitor workers for exposure to external radiation. A self-evaluation of the programme shows that, apart from a few problems encountered, the programme can be judged as fit for its purpose. The results of a questionnaire among the participants support this conclusion. The conclusions encourage EURADOS to continue this programme of self-sustained intercomparisons for IMS.

Results of the EURADOS extremity dosemeter intercomparison 2009

This paper presents the results of an intercomparison for extremity dosemeters organised by the European radiation dosimetry group in 2009. In total, 59 systems were tested during this exercise including ring, stall and wrist dosemeters. A total of 1652 dosemeters were irradiated in the selected fields of photons and beta radiation qualities on appropriate phantoms (ISO finger and pillar phantom) in the dose quantity H(p)(0.07). All irradiations were carried out in selected accredited reference dosemetry laboratories (Seibersdorf Laboratories, Austria and IRSN, France). The results show that, especially at low-energy beta radiations ((85)Kr) and for beta irradiations with large angles of incidence (60°), many tested systems show pronounced under responses. On the other hand, for photon irradiations down to energies of 16 keV most systems showed good results. A participants meeting was held at IM2010 with discussion on both general aspects of this intercomparison and specific problems.

EURADOS self-sustained programme of intercomparisons for individual monitoring services

Within EURADOS working group 2, a system for self-sustained intercomparisons for individual monitoring services for external radiation was developed. With the intercomparison results, the participants can show compliance within their quality management system, compare their results with those from other participants and develop plans for improvement of their system. The costs of the exercises are covered by the participants fees. In this programme, the first intercomparison exercise for whole-body dosemeters has been executed in 2008 with 62 participating dosimetry systems from participants across Europe. In general, film systems show the largest deviations, although the results of some participants indicate that it is possible to achieve results with a film system with similar quality as for thermoluminescence dosimetry (TLD) systems. A second intercomparison has been organised for extremity dosemeters in 2009. For 2010 it is planned to organise a second intercomparison for whole-body dosemeters.

Quality management system in the CIEMAT Radiation Dosimetry Service

This paper describes the activities realised by the CIEMAT Radiation Dosimetry Service (SDR) for the implementation of a quality management system (QMS) in order to achieve compliance with the requirements of ISO/IEC 17025 and to apply for the accreditation for testing measurements of radiation dose. SDR has decided the accreditation of the service as a whole and not for each of its component laboratories. This makes it necessary to design a QMS common to all, thus ensuring alignment and compliance with standard requirements, and simplifying routine works as possible.

First Report of Black Rot on Arugula Caused by Xanthomonas campestris pv. campestris in Argentina

During the fall of 2005, arugula (Eruca sativa Mill.) plants grown in experimental field plots in Buenos Aires, Argentina presented V-shaped necrotic lesions on leaf margins and blackened veins with broad yellow halos, followed by leaf necrosis. At flowering, 96% of the plants were affected with 27% of the leaves with symptoms. Yellow, round, mucoid, convex, bacterial colonies were isolated from several leaves on yeast dextrose chalk agar. Two strains were further studied. Xanthomonas campestris pv. campestris Xcc8004 was used as a control. Strains were gram negative, rod shaped, strictly aerobic, catalase-positive, oxidase and urease-negative, hydrolyzed starch, gelatine and aesculin, and did not reduce nitrate (2). Pathogenicity was tested by spraying 10 3-week-old arugula plants with either a bacterial suspension (10⁷ CFU/ml) or sterile water. Plants were placed in plastic bags for 72 h after inoculation. All inoculated plants showed necrotic lesions enlarging from the margin of the leaves 7 days after inoculation. No lesions were observed on control plants. On the basis of biochemical characterization (2) and genomic fingerprints generated by BOX-PCR (1), the pathogen was identified as X. campestris pv. campestris. To our knowledge, this is the first report of X. campestris pv. campestris causing black rot on arugula in Argentina. References: (1) J. L. Rademaker et al. Int. J. Syst. Evol. Microbiol. 50:665, 2000. (2) N. W. Schaad et al. Laboratory Guide for Identification of Plant Pathogenic Bacteria. 3rd ed. The American Phytopathological Society, St. Paul, MN, 2001.

Evaluation of a compost obtained from forestry wastes and solid phase of pig slurry as a substrate for seedlings production

A composted material obtained from forestry wastes and solid phase of pig slurry was evaluated as a substrate component for the production of tomato and lettuce seedlings. Four different substrates were tested: compost (100C), a mixture of 75% compost and 25% peat substrate (75C), a mixture of 50% compost and 50% peat substrate (50C), and peat-based substrate (control). Compost increased the pH of the substrate from 6.3 (control) to 6.9 (100C) but did not affect the electrical conductivity (0.26 and 0.27 mScm(-1), respectively, for control and 100C). Germination and growth of lettuce seedlings were not affected by the substrate type, contrasting with tomato seedlings where the highest growth occurred at 100C substrate. Increasing compost percentage on substrate increased nitrogen, calcium and magnesium availability and, consequently, the concentration of these elements in plant tissues increased. On the contrary, potassium and manganese concentration decreased. Results from the study suggest that the compost studied is a good alternative to peat-based substrates for the production of vegetable seedlings.

Tomato genotype and Azospirillum inoculation modulate the changes in bacterial communities associated with roots and leaves

AIMS

To evaluate the effect of plant variety and Azospirillum brasilense inoculation on the microbial communities colonizing roots and leaves of tomato (Lycopersicon esculentum Mill.) plants.

METHODS AND RESULTS

Seeds of cherry and fresh-market tomato were inoculated with A. brasilense BNM65. Sixty days after planting, plants were harvested and the microbial communities of the rhizoplane and phyllosphere were analysed by community-level physiological profiles (CLPP) using BIOLOG EcoPlates and denaturing gradient gel electrophoresis (DGGE) of PCR-amplified 16S rRNA genes. Differences on the rhizoplane and phyllosphere bacterial communities between the two tomato types were detected by principal component analysis of the CLPP; DGGE fingerprints also showed differences at the phyllosphere level. Fresh-market tomato had a more complex phyllosphere bacterial community than cherry tomato, as determined by DGGE profiles. Physiological and genetic changes on phyllosphere and rhizoplane bacterial communities by Azospirillum seed inoculation were evident only on cherry tomato.

CONCLUSIONS

Tomato genotype affects the response of native bacterial communities associated with the roots and leaves to A. brasilense seed inoculation.

SIGNIFICANCE AND IMPACT OF THE STUDY

The successful implementation of Azospirillum inoculation requires not only the consideration of the interactions between A. brasilense strains and plant genotypes, but also the plant-associated microflora.

On the use of LiF TLD-600 in neutron-gamma mixed fields

A new procedure allowing the separate estimation of neutron and gamma dose in mixed radiation fields has been developed in our laboratory. In this communication, a description of the main features of the discrimination procedure and some preliminary results obtained by its use are presented. The procedure is based on the significantly different structure of the glow curve of LiF TLD-600 produced by neutron and gamma radiation. The use of peak resolving numerical methods, sometimes called deconvolution, for the analysis of the glow curves from controlled irradiations at absorbed doses in the range 10-300 mGy with different neutron and gamma proportions, permits to quantify the differences peak by peak, also characterising the well-known neutron quasi-exclusive contribution to the high temperature region, above peak 5. From this study, it was possible to propose a n/gamma TL factor by which the respective doses can be estimated through a simplified analysis, not peak resolving, of the particular features of the glow curves obtained in field measurements. A first set of rather satisfactory results have been obtained by irradiating TLD-600 together with TLD-700 chips using Am-Be sources with different degree of moderation and using lead absorbers to change the gamma component. This component is directly measured by the TLD-700 detectors, allowing the testing of the gamma estimation reached by the discrimination procedure applied to the TLD-600 glow curve.

First Report of Downy Mildew of Arugula Caused by Peronospora parasitica in Argentina

Acreage of arugula (Eruca sativa), a crucifer used as a component of green salad mixes, has increased recently in Argentina. During 2004, a foliar disease affected commercial crops in Pilar (northeast of Buenos Aires Province). Arugula plants were affected from the seedling stage to harvest. Severely diseased plants were unmarketable and not harvested. Sunken, round, necrotic lesions (1 to 4 mm in diameter) were observed on the cotyledons. Diseased leaves had irregular, necrotic lesions (2 to 3 mm in diameter) that sometimes became confluent, forming a linear pattern. Necrotic tan patches developed on older leaves. Lesions on the abaxial surface appeared depressed and a gray mold, a typical sign of a downy mildew, was visible. Sporangiophores had dichotomous branches ending in slender curved tips. Sporangia were ovoid with a mean length of 20 μm (17.8 to 22.1 μm) and a mean width of 16 μm (14 to 18.2 μm). Pathogenicity tests were conducted by placing excised diseased leaves onto healthy 30-day-old arugula plants (1). Inoculated plants were placed in plastic bags, previously sprayed with water, for 48 h and maintained in the greenhouse thereafter. Downy mildew symptoms and signs that were similar to those observed in the fields developed 10 days after inoculation. The pathogen was identified as Peronospora parasitica (2). To our knowledge, this is the first report of P. parasitica on arugula in Argentina. References: (1) S. T. Koike. Plant Dis. 82:1063, 1998. (2) W. D. Yerkes and C. G. Shaw. Phytopathology 49:499, 1959.

First Report of White Rust of Arugula Caused by Albugo candida in Argentina

Production of arugula (Eruca sativa) has increased greatly in Argentina. Since 2002, particularly during the fall, a foliar disease has affected commercial crops in Capilla del Señor (northeast of Buenos Aires Province, Argentina). The disease appeared in foci, spreading throughout the whole production field or greenhouse. Severely affected crops were plowed under. Diseased leaves were chlorotic and had white sori that emerged through the abaxial epidermis. Sori corresponded to the white rust agent, Albugo candida (Pers.) Kunze (1). Sporangiophores were hyaline and clavate, and sporangia were globose and hyaline with a mean diameter of 16.2 μm (14.2 to 19.2 μm). Pathogenicity tests were performed by spraying a suspension of 10⁶ zoospores/ml or 5 × 10⁴ sporangia/ml on four healthy 30-day-old arugula plants. Inoculum was prepared by scrapping sporangia from infected leaves. Sporangia were used directly or incubated in sterile distilled water (SDW) for 14 h at 5°C to induce zoospore formation (2). Four additional healthy plants were sprayed with SDW to serve as controls. Plants were kept in plastic bags for 48 h and maintained in the greenhouse thereafter. White rust symptoms, similar to those observed on the original plants from the field, were observed on inoculated plants 10 days after inoculation. To our knowledge, this is the fist report of A. candida on arugula in Argentina. References: (1) K. Mukerji. No. 458 in: Descriptions of Pathogenic Fungi and Bacteria. CMI, Kew, Surrey, UK, 1975. (2) H. Scheck and S. Koike. Plant Dis. 83:877, 1999.

Systemic acquired resistance delays race shifts to major resistance genes in bell pepper

ABSTRACT The lack of durability of host plant disease resistance is a major problem in disease control. Genotype-specific resistance that involves major resistance (R) genes is especially prone to failure. The compatible (i.e., disease) host-pathogen interaction with systemic acquired resistance (SAR) has been studied extensively, but the incompatible (i.e., resistant) interaction less so. Using the pepper-bacterial spot (causal agent, Xanthomonas axonopodis pv. vesicatoria) pathosystem, we examined the effect of SAR in reducing the occurrence of race-change mutants that defeat R genes in laboratory, greenhouse, and field experiments. Pepper plants carrying one or more R genes were sprayed with the plant defense activator acibenzolar-S-methyl (ASM) and challenged with incompatible strains of the pathogen. In the greenhouse, disease lesions first were observed 3 weeks after inoculation. ASM-treated plants carrying a major R gene had significantly fewer lesions caused by both the incompatible (i.e., hypersensitive) and compatible (i.e., disease) responses than occurred on nonsprayed plants. Bacteria isolated from the disease lesions were confirmed to be race-change mutants. In field experiments, there was a delay in the detection of race-change mutants and a reduction in disease severity. Decreased disease severity was associated with a reduction in the number of race-change mutants and the suppression of disease caused by the race-change mutants. This suggests a possible mechanism related to a decrease in the pathogen population size, which subsequently reduces the number of race-change mutants for the selection pressure of R genes. Thus, inducers of SAR are potentially useful for increasing the durability of genotype-specific resistance conferred by major R genes.

[Vascular malformations as syndromic markers]

Vascular malformations are static lesions, generally present at the moment of birth, formed by displasic vessels that grow in proportion to the growth of the child. They show normal cell replacements that constitute genuine mistakes of morphogenesis. The absence of regression of these malformations implies that they remain throughout the lifetime. The terminology describing this type of lesions gave rise to confusion in the medical literature until the International Society for the Study of Vascular Anomalies adopted a classification based on the dominant vessel of the malformation in 1996. This classification distinguishes between simple and complex forms depending on whether they affect one or several types of vessel. Vascular malformations can show themselves as isolated lesions or can be associated with other lesions, constituting the guide sign or being the principal marker of some syndromic complexes. This paper describes the principal signs and symptoms of those syndromes in which a vascular malformation is the key that raises suspicion about the existence of other associated lesions.

A new area multidetector dosemeter for mixed n-gamma fields

A new instrument to assess neutron ambient doses has been designed and constructed. In its design, spectrometric capabilities have been implemented that allow to take into account the energy spectrum of the neutron field in the evaluation of the operational magnitude, ambient dose equivalent, H*(10). This dosemeter is based on the moderation-absorption technique and can be employed over a wide range of energies from thermal to 20 MeV. It consists of a spherical shaped polyethylene moderator with a set of thermoluminescence dosemeters (TLDs) inserted in different positions of its interior to evaluate the external neutron energy spectrum. At this moment the system uses pairs 6LiF:Mg,Ti (TLD-600) and 7LiF:Mg,Ti (TLD-700) thermoluminescence dosemeters for a better gamma discrimination. The dosemeter response matrix was calculated using the MCNP4C Monte Carlo code (MC). The viability of the dosemeter for area dosemetry has been examined experimentally showing its capabilities over a wide range of energies.

Study of the ratio of non-neutron to neutron dose components of cosmic radiation at typical commercial flight altitudes

CIEMAT, in close co-operation with Iberia Airlines, carried out an extensive programme of in-flight measurements, covering both hemispheres, during the years 2001 and 2002. Although the instrumentation onboard included different active devices, the results presented here were obtained from a polyethylene/tungsten-moderated rem meter (SWENDI2; Eberline) and an ionisation chamber (RSS-131; Reuter-Stokes) used for measuring the ambient dose equivalent due to the neutron and the non-neutron components of cosmic radiation, respectively. This paper presents a study of each of the dose components mentioned as a function of the vertical cut-off rigidity and the flight altitude. The ratio between the two components is also presented to determine the variations in cosmic radiation composition as a function of the aforementioned parameters. The experimental results have also been compared with those predicted by the code EPCARD3.2 for the non-neutron and the neutron components of the ambient dose equivalent.

Effect of Azospirillum-mediated plant growth promotion on the development of bacterial diseases on fresh-market and cherry tomato

AIMS

Plant growth-promoting (PGP) activity of two Azospirillum strains and their effects on foliar and vascular bacterial diseases were evaluated on fresh market and cherry tomato.

METHODS AND RESULTS

Tomato seeds were inoculated with A. brasilense Sp7 or Azospirillum sp. BNM-65. Four-week-old plants were challenge-inoculated with Clavibacter michiganensis subsp. michiganensis (bacterial canker) or with Xanthomonas campestris pv. vesicatoria (bacterial spot). Azospirillum-induced PGP was greater on cherry than on fresh-market tomato. Cherry tomato was more resistant to bacterial canker but more susceptible to bacterial spot than the fresh-market tomato. Canker severity was not affected by Azospirillum seed treatments. However, leaf- and plant-death were delayed on Azospirillum-treated plants compared with nontreated controls. Azospirillum increased the bacterial spot severity on cherry but not on fresh-market tomato.

CONCLUSIONS

PGP was observed on both tomato genotypes, although growth effects were larger on cherry tomato. Also, Azospirillum treatments may alter tomato susceptibility to bacterial diseases.

SIGNIFICANCE AND IMPACT OF THE STUDY

The interaction between PGP rhizobacteria like Azospirillum spp., not known to induce systemic resistance, with plant pathogens distantly located is frequently overlooked. This work demonstrates the importance of this kind of evaluation.

Temperature Sensitivity of the Hypersensitive Response of Bell Pepper to Xanthomonas axonopodis pv. vesicatoria

ABSTRACT When bacterial spot-resistant pepper plants carrying resistance gene Bs2 and infiltrated with incompatible strains of Xanthomonas axonopodis pv. vesicatoria carrying a functional avrBs2 gene (races P1 and P3) were incubated at 32 degrees C, they exhibited an electrolyte leakage and bacterial multiplication pattern in planta similar to that obtained with a compatible strain (race P4) carrying a nonfunctional avrBs2 gene. They also developed disease-like symptoms. Pretreatment of incompatible bacteria at 32 degrees C before infiltration caused a delay in electrolyte leakage less pronounced than that caused by exposing plants to 32 degrees C. Also, plants had to be exposed to 32 degrees C for an hour prior to inoculation to increase symptom expression. These data suggest that the Bs2 gene is temperature sensitive. In other experiments, the avrBs1-Bs1 interaction appeared to be the most heat tolerant and thus the least likely to revert to compatible, whereas the avrBs3-Bs3 interaction had an intermediate sensitivity to elevated temperatures.

The use of passive environmental TLDs in the operation of the Spanish early warning network 'REVIRA'

As required by different international agreements, the regulatory body in Spain (Consejo de Seguridad Nuclear) implemented in 1992 a national automatic network (REVIRA) that continuously monitors radiation levels in order to give early warning of incidents having potential transboundary implications. The detector for environmental gamma-radiation dose rate is an active instrument based on a Geiger-Müller counter. However, the use of passive environmental dosemeters provides an additional low-cost dose estimate with an independent centralised calibration and even better basic features than active instruments. Since 1999, all 25 REVIRA stations have been monitored with passive TL environmental dosemeters based on LiF:Mg,Cu,P and operated according to the procedures established at Ciemat. This paper presents the obtained results and the further analysis considering differences in aspects such as photon energy response, inherent background or response to cosmic rays. The benefits of the use of passive environmental dosemeters in early warning networks are discussed.

Experience gained from the Ciemat External Dosimetry Service participation in several environmental dosimetry intercomparisons

This paper summarises the experience gained by the Ciemat External Dosimetry Service (EDS) in the environmental dosimetry intercomparisons organised by the US Department of Energy. During the three latest intercomparisons. important dosimetry aspects such as energy calibration, energy response, dosimetric quantities and signal stability have been tested by the Ciemat EDS on up to seven different thermoluminescent (TL) materials, including hypersensitive phosphors, and employing several dosimetric systems. In last year's intercomparison, in addition to TL dosemeters the Ciemat EDS sent a set of silicon diode active dosemeters, usually used as personal dosemeters, to be tested in environmental conditions without intervention for more than 3 months. All the results obtained from different dosemeters have undergone an exhaustive analysis process in order to find some conclusions that may help to increase the knowledge of field performance of these devices in real but controlled environmental conditions.

Evaluation of the peripheral dose to uterus in breast carcinoma radiotherapy

The absorbed dose outside of the direct fields of radiotherapy treatment (or peripheral dose, PD) is responsible for radiation exposure of the fetus in pregnant women. Because the radiological protection of the unborn child is of particular concern in the early period of the pregnancy, the aim of this study is to estimate the PD in order to assess the absorbed dose in the uterus in a pregnant patient irradiated for breast carcinoma therapy. The treatment was simulated on an Alderson-Rando anthropomorphic phantom, and the radiation dose to the fetus was measured using an ionisation chamber and thermoluminescence dosemeters. Two similar treatments plans with and without wedges were delivered, using a 6 MV photon beam with two isocentric opposite tangential fields with a total dose of 50 Gy, in accordance with common established procedures. Average field parameters for more than 300 patients were studied. Measurements showed the fetal dose to be slightly lower than 50 mGy, a level at which the risk to the fetus is uncertain, although several authors consider this value as the dose threshold for deterministic effects. The planning system (PS) underestimated PD values and no significant influence was found with the use of wedge filters.

Resistance to Bacterial Spot in Bell Pepper Induced by Acibenzolar-S-Methyl

Bell pepper plants sprayed with the chemical acibenzolar-S-methyl (ABM, Actigard 50 WG) showed resistance to subsequent infections with the bacterial spot agent Xanthomonas axonopodis pv. vesicatoria. Induction of resistance was independent of the cultivar used, and was expressed as early as 3 days after treatment and continued for at least 2 weeks. In the field, applications of ABM every 2 weeks, alone or in combination with copper, resulted in disease control similar to the standard treatment of copper plus maneb. Yield response was variable, with certain combinations of chemical treatments and cultivars producing yields as large as the copper plus maneb treatment. In contrast, weekly applications during the entire crop season had a negative impact on yield. In plots maintained free of bacterial spot, applications of ABM every 2 weeks caused a reduction in yield for one cultivar of six tested. The use of chemical inducers for the control of bacterial spot on bell pepper, while generally promising, may result in an unpredictable loss in fruit yield.

XRD, SEM-EDS, and FTIR studies of in vitro growth of an apatite-like layer on sol-gel glasses

A glass with a composition (in mole %) of: SiO2 (70), CaO (26), and P2O5 (4) was obtained using a sol-gel method. The in vitro bioactivity of the glass was assessed by determining the changes in surface morphology and composition after soaking in simulated body fluid (SBF) for periods of up to 14 days at 37 degrees C. X-ray diffraction, scanning electron microscopy, X-ray energy dispersive spectroscopy, and FTIR analyses of the glass surface after different soaking periods in SBF demonstrated the growth of an apatite-like layer on the glass surface. In the first stage, an amorphous calcium phosphate layer was formed; after 7 days this surface consisted of spheres, with diameters ranging between 2 and 15 microm, composed of needle-like apatite crystallites (250 x 100 nm) with a crystallinity similar to that of a biological apatite.

Trace metal levels in chironomid larvae and sediments from a Bolivian river: impact of mining activities

The effect of mining activity on metal accumulation in sediments and Chironomidae in a river in Bolivia was assessed. Surficial sediments and midge larvae (Chironomidae, Diptera) were collected at five sampling sites. Concentrations of the trace metals Cd, Cu, Cr, Ni, Pb, and Zn were measured in organisms and sediments by inductively coupled plasma atomic emission spectrometry. Sediments were subjected to two different extraction procedures to identify total trace metals and reducible trace metals. Geochemical characteristics of the sediment were analyzed: total organic carbon (TOC), Fe and Mn oxides, and particle size distribution. To determine the relative importance of the different sediment factors contributing to the variation in metal accumulation by the chironomid larvae, nonlinear regression models were constructed. No increase in metal concentration in sediment could be measured downstream of the mining activity. Larval concentrations, however, increased markedly. Only for zinc and chromium was a significant amount of variation (48 and 73%, respectively) found. The lack of relationship for the other metals probably was due to a unmeasured exposure route, the overlying water.

Source of intrinsic innervation of canine ventricles: a functional study

Recently it has been suggested that the parasympathetic innervation of the ventricles is by way of postganglionic axones that emanate from ganglion cells in the atria, reaching the ventricles by traversing the atrioventricular (AV) groove. We designed a series of experiments to test this hypothesis. Phenol (89%) was applied to the AV groove and surrounding 5 mm of epicardium in 21 dogs on cardiopulmonary bypass. The effects of intracoronary acetylcholine (ACh; 1-5 micrograms) and intracoronary nicotine (NIC; 25-100 micrograms) on cardiac isovolumic pressures were evaluated after beta-blockade. In another series of experiments, eight dogs were exposed to phenol in the same way and allowed to recover for 7-10 days. Atrial and ventricular responses to NIC were unaffected by phenol application to the AV groove in the acute animals when compared with application of saline alone. However, in the chronic animals, pretreatment with phenol 7-10 days previously reduced the ventricular responses to NIC by 70% while leaving the atrial responses intact. These data indicate that the intrinsic cardiac nerves (ICN) of the canine ventricles consist primarily of postganglionic parasympathetic axones which arise from supraventricular ganglia and cross the AV groove.