Comprehensive first principles to investigate optoelectronic and transport phenomenon of lead-free double perovskites Ba2AsBO6 (B[bond, double bond]Nb, Ta) compounds

In the current work we studied the structural, elastics, electrical, optical, thermoelectric, as well as spectroscopic limited maximum efficiency (SLME) of oxide based Ba2AsBO6 (B[bond, double bond]Nb, Ta) materials. All the calculations were performed using first-principles calculation by employing the WIEN2k code. We checked the stability in diverse forms such as optimization, phonon dispersion, mechanical, formation energy, cohesive energy, and thermal stability is computed. The semiconducting nature of these Ba2AsBO6 (B[bond, double bond]Nb, Ta) systems is revealed by calculating the direct band gap values are 1.97 eV and 1.49 eV respectively. Additionally, we determined the optical properties which analyze the utmost absorption and transition of carriers versus photon energy (eV). Moreover, Ba2AsNbO6 has an estimated SLME of 32 %, making it an encouraging alternative for single-junction solar cells. Lastly, we studied the transport properties against temperature, the chemical potential for p-type and n-type charge carriers at various temperatures. At 300 K, the zT values are found to be 0.757 and 0.751 for Ba2AsBO6 (B[bond, double bond]Nb, Ta) compounds respectively. Both materials were examined as having strong absorption patterns and an excellent figure of merit (ZT), indicating that materials are appropriate for daily life applications.

Exploring luminescent carbon dots derived from syrup bottle waste and curcumin for potential antimicrobial and bioimaging applications

In this study, we utilized a navel hybrid material, prepared by fusing fluorescent Carbon Dots SyCDs, derived from syrup bottles, with curcumin. This innovative approach not only offers significant advancements in antimicrobial activity and bioimaging but also represents a stride in sustainable and eco-friendly nanotechnology. The core of our study is the development of an efficient, cost-effective, and environmentally conscious method for synthesizing SyCDs. This is achieved by repurposing waste syrup bottles, thus addressing the pressing issue of plastic waste. The incorporation of curcumin, renowned for its biological properties, enhances the luminescent characteristics of SyCDs and augments their functionality. This combination overcomes the inherent limitations of curcumin when used in isolation. The hybrid material exhibits enhanced antimicrobial properties and proves to be a potent alternative to conventional fluorescent dyes for bioimaging, marking a substantial leap in the field of sustainable nanomaterials. Our work not only demonstrates the versatile applications of luminescent SyCDs in health and environmental science but also underscores the potential of sustainable approaches in addressing global environmental challenges. This study, represents a significant contribution to the domain of sustainable nanotechnology, highlighting the transformative power of integrating waste management with advanced material science.

Building Molecular Nanomagnets by Encapsulating Lanthanide Ions in Boron Nitride Nanotubes: Ab Initio Investigation

Lanthanide-based single-ion magnets have attracted much interest due to their great potential for information storage at the level of one molecule. Among various strategies to enhance magnetization blocking in such complexes, the synthesis of axially symmetric compounds is regarded as the most promising. Here, we investigate theoretically the magnetization blocking of several lanthanide ions (Tb3+, Dy3+, Ho3+, Er3+, and Tm3+) encapsulated in highly symmetric zigzag boron nitride nanotubes (BNNTs) of different diameters with ab initio methodology. We found that Tb3+@(7,0)BNNT, Dy3+@(7,0)BNNT, and Tm3+@(5,0)BNNT are suitable SIM candidates, while the other investigated complexes from this series show no signs of magnetization blocking owing to a hard competition between contributions to the crystal field of the lanthanide ion from neighboring and more distant atoms of the nanotube.

Role of organic and inorganic amendments on physiological attributes of germinating pea seedlings under arsenic stress

There are scarce data regarding the effects of soil amendments on biophysicochemical responses of plants at the early stages of growth/germination. This study critically compares the effects of ethylene-diamine-tetra-acetic-acid (EDTA) and calcium (Ca) on biophysicochemical responses of germinating pea seedlings under varied arsenic levels (As, 25, 125, 250 µM). Arsenic alone enhanced hydrogen peroxide (H2O2) level in pea roots (176%) and shoot (89%), which significantly reduced seed germination percentage, pigment contents, and growth parameters. Presence of EDTA and Ca in growth culture minimized the toxic effects of As on pea seedlings, EDTA being more pertinent than Ca. Both the amendments decreased H2O2 levels in pea tissues (16% in shoot and 13% in roots by EDTA, and 7% by Ca in shoot), and maintained seed germination, pigment contents, and growth parameters of peas close to those of the control treatment. The effects of all As-treatments were more pronounced in the pea roots than in the shoot. The presence of organic and inorganic amendments can play a useful role in alleviating As toxicity at the early stages of pea growth. The scarcity of data demands comparing plant biophysicochemical responses at different stages of plant growth (germinating vs mature) in future studies.

Metal oxide-embedded carbon-based materials for polymer solar cells and X-ray detectors

This study examines the effects of hybrid nanoparticles made of NiO@rGO (reduced graphene oxide) and NiO@CNT (carbon nanotubes) on PCDTBT and PCBM active layers in glass/ITO/HTL/active-layer/LiF/Al structured bulk heterojunction (BHJ) polymer solar cells (PSCs) and X-ray photodetectors. These hybrid nanoparticles were used to create BHJ solar cells and photodetectors, and microscopic research was conducted to determine how they affect the structure of the devices. The findings show that compared to conventional matrices, the active layers with NiO@rGO and NiO@CNT incorporation have increased the charge carrier capacities and exciton dissociation properties. In order to assess their impact on the characteristics of charge transport, various weight ratios of these hybrid nanoparticles dispersed in polymer junctions are being investigated. Notably, compared to the pure PCDTBT:PCBM active layer (power conversion efficiency (PCE) = 4.35%), the NiO@CNT device has the highest PCE = 6.42% which, among the tested configurations, demonstrates its superior performance in converting sunlight into electricity. Among the tested X-ray detector materials, "NiO@CNT" achieves the best performance with a sensitivity of 1.92 mA Gy-1 cm-2. Through improved interfacial behaviors and effective charge transport, this work highlights the potential of these cutting-edge hybrid nanoparticles to enhance the performance of organic electronic devices.

Influence of fly ash on thermo-mechanical and mechanical behavior of injection molded polypropylene matrix composites

Polypropylene composites find widespread application in industries, including packaging, plastic parts, automotive, textiles, and specialized devices like living hinges known for their remarkable flexibility. This study focuses on the manufacturing of polypropylene composite specimens by incorporating varying weight percentages of fly ash particles with polypropylene using a twin-screw extruder and injection molding machine. The composites were comprehensively tested, evaluating tensile, compressive, and flexural strength, solid-state and polymer melt properties, modulus, damping, and thermal response. The findings reveal that the compressive strength of polypropylene increases up to 2 wt% of added fly ash particles and subsequently exhibits a slight decline. Tensile strength demonstrates an increase up to 1 wt% of fly ash, followed by a decrease with a 2 wt% addition, and then a subsequent increase. Flexural strength shows improvement up to 3 wt% fly ash addition before declining. The storage modulus curve is categorized into three regions: the glassy region (up to 0 °C), the glass transition region (0-50 °C), and the glass transition region of polypropylene (>50 °C), each corresponding to different molecular motions. Weight loss curves exhibit similar trends, indicating uniform pyrolysis behavior attributed to consistent chemical bonds. Plastic degradation commences around 440 °C and concludes near 550 °C. Additionally, elemental mapping of fly ash composition identified various elements such as O, Si, K, Mg, Ca, Cl, Na, P, Al, Fe, S, Cu, Ti, and Ni. These findings offer valuable insights into the mechanical and thermal properties of polypropylene composites reinforced with fly ash, rendering them suitable for a wide range of industrial applications necessitating strength and durability across temperature variations.

Chromium removal from aqueous solution using bimetallic Bi0/Cu0-based nanocomposite biochar

Chromium (Cr), due to its greater contamination in aquifers and distinct eco-toxic impacts, is of greater environmental concern. This study aimed to synthesize nanocomposites of almond shells biochar (BC) with zerovalent bismuth and/or copper (Bi0/BC, Cu0/BC, and Bi0-Cu0/BC) for the removal of Cr from aqueous solution. The synthesized nanocomposites were investigated using various characterization techniques such as XRD, FTIR spectroscopy, SEM, and EDX. The Cr removal potential by the nanocomposites was explored under different Cr concentrations (25-100 mg/L), adsorbent doses (0.5-2.0 g/L), solution pH (2-8), and contact time (10-160 min). The above-mentioned advanced techniques verified successful formation of Bi0/Cu0 and their composite with BC. The synthesized nanocomposites were highly effective in the removal of Cr. The Bi0-Cu0/BC nano-biocomposites showed higher Cr removal efficiency (92%) compared to Cu0/BC (85%), Bi0/BC (76%), and BC (67%). The prepared nanocomposites led to effective Cr removal at lower Cr concentrations (25 mg/L) and acidic pH (4.0). The Cr solubility changes with pH, resulting in different degrees of Cr removal by Bi0-Cu0/BC, with Cr(VI) being more soluble and easier to adsorb at low pH levels and Cr(III) being less soluble and more difficult to adsorb at high pH levels. The experimental Cr adsorption well fitted with the Freundlich adsorption isotherm model (R2 > 0.99) and pseudo-second-order kinetic model. Among the prepared nanocomposites, the Bi0-Cu0/BC showed greater stability and reusability. It was established that the as-synthesized Bi0-Cu0/BC nano-biocomposite showed excellent adsorption potential for practical Cr removal from contaminated water.

Arsenic level in groundwater and biological samples in Khanewal, Pakistan

Groundwater is the most valuable natural source in our earth's planet, being contaminated in various regions worldwide. Despite considerable research, there are scarce data regarding arsenic (As) levels in groundwater and its build-up in biological samples in Pakistan. The current investigation analyzed As contamination in four tehsils of District Khanewal (Kabirwala tehsil, Jahaniyan tehsil, Mian Channu tehsil, and Khanewal tehsil). For that, 123 groundwater samples, 19 animal milk samples, 20 human nails, and 20 human hair samples were collected from the study area. Arsenic concentration in groundwater was up to 51.8 µg/L with an average value of 7.2 µg/L. About 28 water samples (23%) had As contents > WHO limit and 38 samples (31%) > DEP-NJ limit. Low levels of As were detected in biological samples. Average As levels were 23 µg/L in the milk samples and 298 µg/kg in human hair. Arsenic contents were not detected in nail samples, except in one sample from Kabirwala tehsil. The maximum values of hazard quotient and cancer risk in District Khanewal were 4.9 and 0.0022, respectively. It is anticipated that long-term use of As-containing water may led to poisoning of humans in the study area, especially in Kabirwala. Therefore, it is necessary to monitor As contamination in the groundwater of Kabirwala tehsil to reduce the potential health hazards.

Comparison of As removal efficiency and health risks from aqueous solution using as-synthesized Fe0 and Cu0: modelling, kinetics and reusability

Batch scale removal of arsenic (As) from aqueous media was explored using nano-zero valent iron (Fe0) and copper (Cu0) particles. The synthesized particles were characterized using a Brunauer-Emmett-Teller (BET) surface area analyzer, a scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR). The BET result showed that the surface area (31.5 m2/g) and pore volume (0.0415 cm3/g) of synthesized Fe0 were higher than the surface area (17.56 m2/g) and pore volume (0.0287 cm3/g) of Cu0. The SEM results showed that the morphology of the Fe0 and Cu0 was flowery microspheres and highly agglomerated with thin flakes. The FTIR spectra for Fe0 showed broad and intense peaks as compared to Cu0. The effects of the adsorbent dose (1-4 g/L), initial concentration of As (2 mg/L to 10 mg/L) and solution pH (2-12) were evaluated on the removal of As. Results revealed that effective removal of As was obtained at pH 4 with Fe0 (94.95%) and Cu0 (74.86%). When the dosage increased from 1 to 4 g L-1, the As removal increased from 70.59 to 93.02% with Fe0 and from 67 to 70.59% with Cu0. However, increasing the initial As concentration decreased the As removal significantly. Health risk indices, including estimated daily intake (EDI), hazard quotient (HQ), and cancer risk (CR) were employed and a significant decline (up to 99%) in risk indices was observed in As-treated water using Fe0/Cu0. Among the adsorption isotherm models, the values of R2 showed that isothermal As adsorption by Fe0 and Cu0 was well explained by the Freundlich adsorption isotherm model (R2 > 0.98) while the kinetic experimental data was well-fitted with the Pseudo second order model. The Fe0 showed excellent stability and reusability over five sorption cycles, and it was concluded that, compared to the Cu0, the Fe0 could be a promising technology for remediating As-contaminated groundwater.

Fabricated Gamma-Alumina-Supported Zinc Ferrite Catalyst for Solvent-Free Aerobic Oxidation of Cyclic Ethers to Lactones

The aim of this work was to fabricate a new heterogeneous catalyst as zinc ferrite (ZF) supported on gamma-alumina (γ-Al2O3) for the conversion of cyclic ethers to the corresponding, more valuable lactones, using a solvent-free method and O2 as an oxidant. Hence, the ZF@γ-Al2O3 catalyst was prepared using a deposition-coprecipitation method, then characterized using TEM, SEM, EDS, TGA, FTIR, XRD, ICP, XPS, and BET surface area, and further applied for aerobic oxidation of cyclic ethers. The structural analysis indicated spherical, uniform ZF particles of 24 nm dispersed on the alumina support. Importantly, the incorporation of ZF into the support influenced its texture, i.e., the surface area and pore size were reduced while the pore diameter was increased. The product identification indicated lactone compound as the major product for saturated cyclic ether oxidation. For THF as a model reaction, it was found that the supported catalyst was 3.2 times more potent towards the oxidation of cyclic ethers than the unsupported one. Furthermore, the low reactivity of the six-membered ethers can be tackled by optimizing the oxidant pressure and the reaction time. In the case of unsaturated ethers, deep oxidation and polymerization reactions were competitive oxidations. Furthermore, it was found that the supported catalyst maintained good stability and catalytic activity, even after four cycles.

Latest Innovations in 2D Flexible Nanoelectronics

2D materials with dangling-bond-free surfaces and atomically thin layers have been shown to be capable of being incorporated into flexible electronic devices. The electronic and optical properties of 2D materials can be tuned or controlled in other ways by using the intriguing strain engineering method. The latest and encouraging techniques in regard to creating flexible 2D nanoelectronics are condensed in this review. These techniques have the potential to be used in a wider range of applications in the near and long term. It is possible to use ultrathin 2D materials (graphene, BP, WTe2 , VSe2 etc.) and 2D transition metal dichalcogenides (2D TMDs) in order to enable the electrical behavior of the devices to be studied. A category of materials is produced on smaller scales by exfoliating bulk materials, whereas chemical vapor deposition (CVD) and epitaxial growth are employed on larger scales. This overview highlights two distinct requirements, which include from a single semiconductor or with van der Waals heterostructures of various nanomaterials. They include where strain must be avoided and where it is required, such as solutions to produce strain-insensitive devices, and such as pressure-sensitive outcomes, respectively. Finally, points-of-view about the current difficulties and possibilities in regard to using 2D materials in flexible electronics are provided.

Bulk Photovoltaic Effect in Two-Dimensional Distorted MoTe2

In future solar cell technologies, the thermodynamic Shockley-Queisser limit for solar-to-current conversion in traditional p-n junctions could potentially be overcome with a bulk photovoltaic effect by creating an inversion broken symmetry in piezoelectric or ferroelectric materials. Here, we unveiled mechanical distortion-induced bulk photovoltaic behavior in a two-dimensional (2D) material, MoTe2, caused by the phase transition and broken inversion symmetry in MoTe2. The phase transition from single-crystalline semiconducting 2H-MoTe2 to semimetallic 1T'-MoTe2 was confirmed using X-ray photoelectron spectroscopy (XPS). We used a micrometer-scale system to measure the absorption of energy, which reduced from 800 to 63 meV during phase transformation from hexagonal to distorted octahedral and revealed a smaller bandgap semimetallic behavior. Experimentally, a large bulk photovoltaic response is anticipated with the maximum photovoltage VOC = 16 mV and a positive signal of the ISC = 60 μA (400 nm, 90.4 Wcm-2) in the absence of an external electric field. The maximum values of both R and EQE were found to be 98 mAW-1 and 30%, respectively. Our findings are distinctive features of the photocurrent responses caused by in-plane polarity and its potential from a wide pool of established TMD-based nanomaterials and a cutting-edge approach to optimize the efficiency in converting photons-to-electricity for power harvesting optoelectronics devices.

Single-ion magnet behavior of Ln3+ encapsulated in carbon nanotubes: an ab initio insight

Single-molecule magnets (SMMs) have attracted large interest owing to their capability to store information at the level of a single molecule, which has great potential for applications in information technology. The key characteristic required for SMM performance is the magnetization blocking barrier, and in the last decade, impressive efforts have been made to increase its height. Herein, we report an ab initio investigation of the SMM behavior of a series of lanthanide ions (Tb3+, Dy3+, Ho3+, Er3+, Tm3+ and Yb3+) encapsulated in zigzag carbon nanotubes (CNTs) of different diameters. The results show that despite the high symmetry of the Ln environment, none of the investigated systems, except for Er3+ encapsulated in the (7,0) CNT, exhibited any blocking behavior. This is mainly attributed to the strong competition between axial and equatorial contributions to the crystal field of these encapsulated ions, resulting in weak or lack of magnetic axiality. The presented results provide useful theoretical guidance for the design of high-performance SMMs via modulating the crystal field of the ligand environment.

Effect of freshwater and wastewater irrigation on buildup of toxic elements in soil and maize crop

Untreated wastewater is routinely used for agricultural activities in water-stressed regions, thereby causing severe ecological risks by various pollutants. Hence, management strategies are needed to cope with the environmental issues related to wastewater use in agriculture. This pot study evaluates the effect of mixing either freshwater (FW) or groundwater (GW) with sewage water (SW) on the buildup of potentially toxic elements (PTEs) in soil and maize crop. Results revealed that SW of Vehari contains high levels of Cd (0.08 mg L^-1) and Cr (2.3 mg L^-1). Mixing of FW and GW with SW increased soil contents of As (22%) and decreased Cd (1%), Cu (1%), Fe (3%), Mn (9%), Ni (9%), Pb (10%), and Zn (4%) than SW "alone" treatment. Risk indices showed high-degree of soil-contamination and very-high ecological risks. Maize accumulated considerable concentrations of PTEs in roots and shoot with bioconcentration factor > 1 for Cd, Cu, and Pb and transfer factor > 1 for As, Fe, Mn, and Ni. Overall, mixed treatments increased plant contents of As (118%), Cu (7%), Mn (8%), Ni (55%), and Zn (1%), while decreased those of Cd (7%), Fe (5%), and Pb (1%) compared to SW "alone" treatments. Risk indices predicted possible carcinogenic risks to cow (CR 0.003 > 0.0001) and sheep (CR 0.0121 > 0.0001) due to consumption of maize fodder containing PTEs. Hence, to minimize possible environmental/health hazards, mixing of FW and GW with SW can be an effective strategy. However, the recommendation greatly depends on the composition of mixing waters.

Potential of magnetic quinoa biosorbent composite and HNO3 treated biosorbent for effective sequestration of chromium (VI) from contaminated water

The present study aims to prepare novel quinoa biosorbent (QB), acid activated QB (QB/Acid) and its nanocomposite with magnetic nanoparticles (QB/MNPs) for batch scale Cr removal from contaminated water. The Cr adsorption was systematically studied at different pH (2-9), adsorbent dosage (1-3 g/L), initial concentration (25-200 mg/L), contact time (180 min) and competing ions in water. Maximum Cr adsorption was observed onto QB/MNPs (57.4 mg/L), followed by QB/Acid (46.35 mg/g) and QB (39.9 mg/g). The Cr removal by QB/MNPs was higher than QB/Acid and QB. Results revealed that the highest Cr removal was obtained at optimum pH 4, 25 mg/L, and 2 g/L dosage. The FTIR spectra displayed various functional groups on adsorbents surface serving as a potential scaffold to remove Cr from contaminated water. The equilibrium and kinetic Cr adsorption data best fitted with Freundlich and pseudo-second order models, respectively (R² ≥ 0.96). The QB/MNPs showed excellent reusability in five adsorption/desorption cycles (4.7% decline) with minor leaching of Fe (below threshold level). The coexisting ions in groundwater showed an inhibitory effect on Cr sequestration (5%) from water. The comparison of Cr adsorption by QB/MNPs and QB/Acid showed better potential for Cr sequestration than various previously explored adsorbents in the literature.

Screening of ionic liquids as green entrainers for ethanol water separation by extractive distillation: COSMO-RS prediction and aspen plus simulation

Ionic liquids (ILs) have been demonstrated as promising alternatives to conventional entrainers in separation of azeotropic mixtures mostly investigating phase equilibrium and process design scenarios. However, proper selection of ILs for a specific task always remains challenging. Hence a simulation tool, i.e. conductor like screening model for real solvents (COSMO-RS) was applied to address this challenge. Furthermore, screened ILs were simulated as entrainers for ethanol water separation by extractive distillation. The current study also aims to demonstrate a systematic approach to retrofit existing processes, by employing ILs as green entrainers. Screening of twenty-five (25) ILs was carried out using COSMO-RS to select suitable ILs as green entrainers based on activity coefficient, capacity and selectivity. Results illustrated that tetramethylammonium chloride ([TMAm][Cl]) due to its strong hydrogen bonding ability was found to be the best ILs entrainer. Moreover, in order to reduce the operating costs without compromising desired product purity (ethanol purity ≥99.5% in top product), the selected ILs (8 kg/h) in a mixture with ethylene glycol (72 kg/h) were simulated using Aspen plus v.11. The simulation results revealed that by combining tetramethylammonium chloride (2 kg/h) with ethylene glycol (78 kg/h) reduced 7.26 tons of CO2 emissions/year through heat integration by saving 1.49*108 kJ/year energy besides minimizing operating costs. In conclusion, the systematic selection of ILs as green entrainers in combination with ethylene glycol and then the appropriate simulation of the whole system will ultimately reduce the cost of the separation process and reduce the emission of greenhouse gases as well utilization of toxic conventional entrainers.

Accumulation pattern and risk assessment of potentially toxic elements in selected wastewater-irrigated soils and plants in Vehari, Pakistan

There are scarce data about the accumulation pattern and risk assessment of potentially toxic elements (PTEs) in soil and associated potential ecological risks, especially in less-developed countries. This study aims to assess the pollution levels and potential ecological risks of PTEs (As, Cr, Cd, Cu, Ni, Mn, Pb and Zn) in wastewater-irrigated arable soils and different edible-grown plants in selected areas of Vehari, Pakistan. The results revealed that the values of PTEs in soil samples were higher than their respective limit values by 20% for As, 87% for Cd, 15% for Cu, 2% for Cr, 83% for Mn, 98% for Fe, and 7% for Zn. The values of soil risk indices such as the potential ecological risk (PERI >380 for all samples), pollution load index (PLI >4 for 94% of studied samples), and degree of contamination (Dc > 24 for all samples) showed severe soil contamination in the study area. Some vegetables exhibited a high metal accumulation index (e.g., 8.1 for onion), signifying potential associated health hazards. Thus, long-term wastewater irrigation has led to severe soil contamination, which can pose potential ecological risks via PTE accumulation in crops, particularly Cd. Therefore, to ensure food safety, frequent wastewater irrigation practices need to be minimized and managed in the study area.

Electrocatalytic oxidation and amperometric determination of sulfasalazine using bimetal oxide nanoparticles-decorated graphene oxide composite modified glassy carbon electrode at neutral pH

Cube-shaped samarium orthovanadate (SmVO₄) nanoparticles were interconnected with a graphene oxide sheet (GOS) using a simple and eco-friendly method to generate a SmVO₄@GOS nanocomposite. SmVO₄ was characterized using various spectroscopic and microscopic techniques, which confirmed the wrapping of GOS around the SmVO₄ nanoparticles. SmVO₄@GOS was then used to modify a glassy carbon electrode (GCE), which was evaluated for its electrochemical performance toward the assay of sulfasalazine (SSZ), an antibiotic drug. Cyclic voltammetry and amperometry were both used for the assay of SSZ using the SmVO₄@GOS-modified GCE at pH 7. The modified amperometric sensor is more sensitive, with a low detection limit (2.16 nM) and wide linear range of 20 nM-667 μM (Ag/AgCl). The electrochemical oxidation of SSZ was tested with blood serum and urine samples at physiological pH with recoveries in the range 96.1-98.6%. It indicates that the modified electrochemical sensor has good sensitivity and practical applicability toward SSZ detection. In the field of non-enzymatic sensors, SmVO₄@GOS/GCE provides a highly promising performance. Therefore, the electrochemical sensors have capacity for extensive analytical applications in biomedical devices.

Highly Selective and Sensitive Voltammetric Method for the Detection of Catechol in Tea and Water Samples Using Poly(gibberellic acid)-Modified Carbon Paste Electrode

Despite the wide range of applications of catechol (CC) in agrochemical, petrochemical, textile, cosmetics, and pharmaceutical industries, its exposure to the environment leads to health issues as it is carcinogenic. This increased the concern over the risk of exposure level of CC in the environment, and monitoring its level has become critical. In this work, we report the fabrication of poly-gibberellic acid-modified carbon paste electrode (PGBAMCPE) to be a simple, viable, and effective electrochemical electrode for the determination of CC. This was synthesized by a simple electropolymerization method by the cyclic voltammetry (CV) technique. The electrodes were characterized by field emission electron microscopy, energy-dispersive X-ray spectroscopy, and electrochemical impedance spectroscopy. Compared to the bare carbon paste electrode, the sensitivity for CC fortified at PGBAMCPE in both CV and differential pulse voltammetry (DPV). We succeeded attaining a lower detection limit of 0.57 μM by the DPV method. The developed electrode was observed to be highly conductive, transducing, stable, and reproducible and was highly selective with anti-interfering properties from the determination of CC with hydroquinone simultaneously. The applicability of the electrode was confirmed from the detection CC in tea and water samples with good recoveries. This substantiates that PGBAMCPE is promising and consistent for the rapid monitoring of CC-contaminated area and clinical diagnosis.

Electrocatalytic Determination of Hydroxychloroquine Using Sodium Dodecyl Sulphate Modified Carbon Nanotube Paste Electrode

Selective, sensitive, easy, and fast voltammetric techniques were developed for the analysis of Hydroxychloroquine (HCQ). These analysis were carried out at sodium dodecyl sulphate modified carbon nanotube paste electrode (SDSMCNTPE) using an aqueous 0.2 M phosphate buffer solution as supporting electrolyte. The field emission-scanning electron microscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy were used for material characterization. A minute quantity of the SDS surfactant was sufficient to convey an outstanding electrocatalytic action to the electrochemical oxidation nature of HCQ. The HCQ molecule parades only electrochemical oxidation (irreversible) with the transfer of two electrons. The detection of HCQ was carried out through CV method at SDSMCNTPE and bare carbon nanotube paste electrode (BCNTPE). The corresponding analytical curve offered a decent linear nature in the considered HCQ concentration range (10-40 µM) and the detection limit was found to be 0.85 µM. The significant peak to peak split-up was observed between HCQ and interferents with a decent sensitivity and stability. The SDSMCNTPE to be an approachable electrode for the usage in the examination of HCQ independently and in the presence of paracetamol (PC) and ascorbic acid (AA). Thus, they were used to determine HCQ in pharmaceutical formulations and the results that showed good agreement with comparative methods. Furthermore, a mechanism for HCQ electro-oxidation was proposed.

MXene/Ag2CrO4 Nanocomposite as Supercapacitors Electrode

MXene/Ag₂CrO₄ nanocomposite was synthesized effectively by means of superficial low-cost co-precipitation technique in order to inspect its capacitive storage potential for supercapacitors. MXene was etched from MAX powder and Ag₂CrO₄ spinel was synthesized by an easy sol-gel scheme. X-Ray diffraction (XRD) revealed an addition in inter-planar spacing from 4.7 Å to 6.2 Å while Ag₂CrO₄ nanoparticles diffused in form of clusters over MXene layers that had been explored by scanning electron microscopy (SEM). Energy dispersive X-Ray (EDX) demonstrated the elemental analysis. Raman spectroscopy opens the gap between bonding structure of as-synthesized nanocomposite. From photoluminence (PL) spectra the energy band gap value 3.86 eV was estimated. Electrode properties were characterized by applying electrochemical observations such as cyclic voltammetry along with electrochemical impedance spectroscopy (EIS) for understanding redox mechanism and electron transfer rate constant K_app. Additionally, this novel work will be an assessment to analyze the capacitive behavior of electrode in different electrolytes such as in acidic of 0.1 M H₂SO₄ has specific capacitance C_sp = 525 F/g at 10 mVs⁻¹ and much low value in basic of 1 M KOH electrolyte. This paper reflects the novel synthesis and applications of MXene/Ag₂CrO₄ nanocomposite electrode fabrication in energy storage devices such as supercapacitors.

Bio-inspired ZnO NPs synthesized from Citrus sinensis peels extract for Congo red removal from textile wastewater via photocatalysis: Optimization, mechanisms, techno-economic analysis

Textile industry is one of the most environmental unfriendly industrial processes due to the massive generation of colored wastewater contaminated with dyes and other chemical auxiliaries. These contaminants are known to have undesirable consequences to ecosystem. The present study investigated the best operating parameters for the removal of congo red (CR, as the model for dye wastewater) by orange peels extract biosynthesized zinc oxide nanoparticles (ZnO NPs) via photocatalysis in an aqueous solution. The response surface methodology (RSM) with ZnO NPs loadings (0.05-0.20 g), pH (3.00-11.00), and initial CR concentration (5-20 ppm) were used for the optimization process. The applicability of ZnO NPs in the dye wastewater treatment was evaluated based on the techno-economic analysis (TEA). ZnO NPs exhibited hexagonal wurtzite structure with = C-H, C-O, -C-O-C, CC, O-H as the main functional groups. The maximum degradation of CR was more than 96% with 0.171 g of ZnO NPs, at pH 6.43 and 5 ppm of CR and 90% of the R² coefficient. The specific cost of ZnO NPs production is USD 20.25 per kg. These findings indicated that the biosynthesized ZnO NPs with orange peels extract provides alternative method for treating dye wastewater.

Adsorptional-photocatalytic removal of fast sulphon black dye by using chitin-cl-poly(itaconic acid-co-acrylamide)/zirconium tungstate nanocomposite hydrogel

In the present work, the removal of fast sulphon black (FSB) dye from water was executed by using chitin-cl-poly(itaconic acid-co-acrylamide)/zirconium tungstate nanocomposite hydrogel (Ch-cl-poly(IA-co-AAm)-ZrW NCH). The Ch-cl-poly(IA-co-AAm)-ZrW NCH was fabricated proficiently by microwave-induced sol-gel/copolymrization method. The zirconium tungstate (ZrW) photocatalyst was prepared by co-precipitation method using sodium tungstate and zirconium oxychloride in ratio (2:1). The polymeric hydrogel part has been used to support the ZrW, and it acted as an adsorbent for adsorptive removal of FSB dye. The band gap for nanocomposite hydrogel was found about 4.18 eV by using Tauc equation. The Ch-cl-poly(IA-co-AAm)-ZrW NCH was characterized by various techniques as FTIR (Fourier-transform infrared spectroscopy), X-ray diffraction (XRD), transmittance electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM). The adsorptional-photocatalytic remediation experiment of FSB dye was optimized for reaction parameters as FSB dye and Ch-cl-poly(IA-co-AAm)-ZrW NCH concentration, and pH. The maximum percentage removal for FSB dye was observed at 92.66% in 120 min under adsorptional-photocatalysis condition.

High Stability and Long Cycle Life of Rechargeable Sodium-Ion Battery Using Manganese Oxide Cathode: A Combined Density Functional Theory (DFT) and Experimental Study

Sodium-ion batteries (SIBs) can develop cost-effective and safe energy storage technology for substantial energy storage demands. In this work, we have developed manganese oxide (α-MnO2) nanorods for SIB applications. The crystal structure, which is crucial for high-performance energy storage, is examined systematically for the metal oxide cathode. The intercalation of sodium into the α-MnO2 matrix was studied using the theoretical density functional theory (DFT) studies. The DFT studies predict Na ions' facile diffusion kinetics through the MnO2 lattice with an attractively low diffusion barrier (0.21 eV). When employed as a cathode material for SIBs, MnO2 showed a moderate capacity (109 mAh·g-1 at C/20 current rate) and superior life cyclability (58.6% after 800 cycles) in NaPF6/EC+DMC (5% FEC) electrolyte. It shows a much higher capacity of 181 mAh·g-1 (C/20 current rate) in NaClO4/PC (5% FEC) electrolyte, though it suffers fast capacity fading (11.5% after 800 cycles). Our findings show that high crystallinity and hierarchical nanorod morphology of the MnO2 are responsible for better cycling performance in conjunction with fast and sustained charge-discharge behaviors.

Homo–hetero/core–shell structure design strategy of NaYF4 nanocrystals for superior upconversion luminescence

A comprehensive strategy has been developed to construct nano-sized homogeneous and heterogeneous core/shell structures of NaYF₄ host. Synthesis conditions of cubic phase/α-NaYF₄ and hexagonal phase/β-NaYF₄ are discussed. Pure cubic NaYF₄:Yb,Er nanocrystals were synthesized with different average sizes extending from 7 nm to 15 nm by varying the reaction time. Temperature and time thresholds of hexagonal nucleation were determined and utilized for controlled core/shell structures of different phases. α-NaYF₄:Yb,Er@α-NaYF₄, α-NaYF₄:Yb,Er@β-NaYF₄, β-NaYF₄:Yb,Er@α-NaYF₄, and β-NaYF₄:Yb,Er@β-NaYF₄ core/shell structures were prepared by adopting the required conditions to achieve the desired phase. Excess sodium was used to grow hexagonal shell over metastable cubic core under controlled conditions of reaction time and temperature to prevent the structural transition of the core. Upconversion emission spectra have also been obtained. UCL integrated intensities demonstrated about 5-fold enhancement for α-shell over α-core as compared to the core alone and 22-fold enhancement with β-shell. On the other hand, α-shell over β-core exhibited 5-fold enhancement and β-shell over β-core exhibited 6-fold enhancement.

Establishment of essential conditions of different phases of NaYF₄ and their utilization for the synthesis of core/shell structures to achieve the enhancement of UCL intensities.

Bismuth-Doped Nano Zerovalent Iron: A Novel Catalyst for Chloramphenicol Degradation and Hydrogen Production

In this study, we showed that doping bismuth (Bi) at the surface of Fe⁰ (Bi/Fe⁰, bimetallic iron system)-synthesized by a simple borohydride reduction method-can considerably accelerate the reductive degradation of chloramphenicol (CHP). At a reaction time of 12 min, 62, 68, 74, 95, and 82% degradation of CHP was achieved with Fe⁰, Bi/Fe⁰-1 [1% (w/w) of Bi], Bi/Fe⁰-3 [3% (w/w) of Bi], Bi/Fe⁰-5 [5% (w/w) of Bi], and Bi/Fe⁰-8 [8% (w/w) of Bi], respectively. Further improvements in the degradation efficiency of CHP were observed by combining the peroxymonosulfate (HSO₅ ^-) with Bi/Fe⁰-5 (i.e., 81% by Bi/Fe⁰-5 and 98% by the Bi/Fe⁰-5/HSO₅ ^- system at 8 min of treatment). Interestingly, both Fe⁰ and Bi/Fe⁰-5 showed effective H₂ production under dark conditions that reached 544 and 712 μM by Fe⁰ and Bi/Fe⁰-5, respectively, in 70 mL of aqueous solution containing 0.07 g (i.e., at 1 g L^-1 concentration) of the catalyst at ambient temperature.

Photocatalytic degradation of Maxilon C.I. basic dye using CS/CoFe2O4/GONCs as a heterogeneous photo-Fenton catalyst prepared by gamma irradiation

CS/CF/GONCs were synthesized via gamma irradiation cross-linking method with the aid of sonication. The nanocomposites exhibited a photo-Fenton catalytic feature for the degradation of Maxilon C.I. basic dye in aqueous medium using sunlight. The effects of pH, H2O2 concentration, and dosage of the catalyst, on the degradation rates of the dyes were examined. The optimal degradation rate was reached with 10mM H2O2 at pH 9.5. It was verified that the Maxilon C.I. basic dye degradation rate fits a pseudo-first-order kinetics for different initial concentrations of Maxilon C.I. dye. Fourth cyclic tests for Maxilon C.I. degradation showed that the magnetic catalyst was very stable, recoverable, highly active, and easy to separate using an external magnet. Hence, this magnetic catalyst has potential use in organic pollutant removal.

Conformational and vibrational analysis of 18-crown-6-alkali metal cation complexes

Conformational analysis was performed for the 18-crown-6-alkali metal cation complexes, 18c6-AMCCs, using the CONFLEX method. The number of predicted conformations of the 18c6-Li+, Na+, K+, Rb+ and Cs+ complexes was 10, 24, 15, 9 and 4 conformations, respectively. Electronic and geometrical structures were calculated for the predicted conformations at the HF, B3LYP, CAM-B3LYP, M06 and MP2 levels. Binding energies and enthalpies of the ground state conformations were also calculated. Vibrational, IR and Raman, spectra of free 18c6 and 18c6-AMCCs were measured. Comparison between the calculated vibrational frequencies using multi-scale-factor scaling of the B3LYP force field and the experimental vibrational frequencies predicted that the 18c6-K+, Rb+ and Cs+ complexes exist in the D3d, C3v and C3v conformations, respectively. It was also predicted that the 18c6-Na+ complex exists in a D3d-like conformation. It was not possible to identify in what conformation the 18c6-Li+ complex exists.

Conformational study of the structure of 12-crown-4-alkali metal cation complexes

A conformational search was performed for the 12-crown-4 (12c4)-alkali metal cation complexes using two different methods, one of them is the CONFLEX method, whereby eight conformations were predicted. Computations were performed for the eight predicted conformations at the HF/6-31+G*, MP2/6-31+G*//HF/6-31+G*, B3LYP/6-31+G*, MP2/6-31+G*//B3LYP/6-31+G*, and MP2/6-31+G* levels. The calculated energies predict a C4 conformation for the 12c4-Na+, -K+, -Rb+, and -Cs+ complexes and a C(s) conformation for the 12c4-Li+ complex to be the lowest energy conformations. For most of the conformations considered, the relative energies, with respect to the C4 conformation, at the MP2/6-31+G*//B3LYP/6-31+G* are overestimated, compared to those at the MP2/6-31+G* level, the highest level of theory considerd in this report, by 0.2 kcal/mol. Larger relative energy differences are attributed to larger differences between the B3LYP and MP2 optimized geomtries. Binding enthalpies (BEs) were calculated at the above-mentioned levels for the eight conformations. The agreement between the calculated and experimental BEs is discussed.

Conformational study of the structure of free 18-crown-6

A conformational search was performed for 18-crown-6 using the CONLEX method at the MM3 level. To have a more accurate energy order of the predicted conformations, the predicted conformations were geometry optimized at the HF/STO-3G level and the 198 lowest energy conformations, according to the HF/STO-3G energy order, were geometry optimized at the HF/6-31+G level. In addition, the 47 nonredundant lowest energy conformations, according to the MP2/6-31+G energy order at the HF/6-31+G optimized geometry, hereafter the MP2/6-31+G//HF/6-31+G energy order, were geometry optimized at the B3LYP/6-31+G level. According to the MP2/6-31+G//B3LYP/6-31+G energy order, three conformations had energies lower than the experimentally known Ci conformation of 18c6. At the MP2/6-31+G//B3LYP/6-31+G level, the S6 lowest energy conformation is more stable by 1.96 kcal/mol than this Ci conformation. This was confirmed by results at the MP2/6-31+G level with an energy difference of 1.84 kcal/mol. Comparison between the structure of the S6 conformation of 18c6 and the S4 lowest energy conformation of 12-crown-4, as well as other important conformations of both molecules, is made. It is concluded that the correlation energy is necessary to have an accurate energy order of the predicted conformations. A rationalization of the conformational energy order in terms of the hydrogen bonding and conformational dihedral angles is given. It is also suggested that to have a better energy order of the predicted conformations at the MM3 level, better empirical force fields corresponding to the hydrogen bond interactions are needed.

Experimental and Theoretical Study of the Vibrational Spectra of 12-Crown-4−Alkali Metal Cation Complexes

The vibrational, Raman, and IR, spectra of the five 12-crown-4 (12c4) complexes with Li+, Na+, K+, Rb+, and Cs+ alkali metal cations were measured. Except for a small shift of the position of some bands in the vibrational spectra of the Li+ complex, the vibrational spectra of the five complexes are so similar that it is concluded that the five complexes exist in the same conformation. B3LYP/6-31+G* force fields were calculated for six of the eight predicted conformations in a previous report (J. Phys. Chem. A 2005, 109, 8041) of the 12c4-Li+, Na+, and K+ complexes that are of symmetries higher than the C1 symmetry. These six conformations, in energy order, are of C4, Cs, Cs, C(2v), C(2v), and Cs symmetries. Comparison between the experimental and calculated vibrational frequencies assuming any of the above-mentioned six conformations shows that the five complexes exist in the C4 conformation. This agrees with the fact that the five alkali metal cations are larger than the 12c4 ring cavity. The B3LYP/6-31+G* force fields of the C4 conformation of the Li+, Na+ and K+ complexes were scaled using a set of eight scale factors and the scale factors were varied so as to minimize the difference between the calculated and experimental vibrational frequencies. The root-mean-square (rms) deviations of the calculated frequencies from the experimental frequencies were 7.7, 5.6, and 5.1 cm(-1) for the Li+, Na+, and K+ complexes, respectively. To account for the earlier results of the Li+ complex that the Cs conformation is more stable than the C4 conformation by 0.16 kcal/mol at the MP2/6-31+G* level, optimized geometries of the complex were calculated for the C4 and Cs conformations at the MP2/6-311++G** level. The C4 conformation was calculated to be more stable than the Cs conformation by 0.13 kcal/mol.

Experimental and Theoretical Study of the Vibrational Spectra of Free 12-Crown-4

The Raman and IR spectra of free 12-crown-4 (12c4) were measured in the solid, liquid, and solution phases. In the three phases, IR active modes were Raman inactive and IR inactive modes were Raman active. According to the exclusion rule, this is consistent with a conformation with a center of inversion. This indicates that 12c4 in the above-mentioned three phases exists in the C(i) conformation. Harmonic force fields were calculated for five of the lowest energy conformations of 12c4 of C(i), S(4), C(4), C(2), and C(s) symmetries at the corresponding optimized geometries at the B3LYP/6-31+G level. The five force fields were scaled using a six-scale-factor scaling scheme. The scale factors were varied to minimize the difference between the calculated and experimental fundamental frequencies, except that corresponding to the C-H stretching mode that was held fixed. The root-mean-square (rms) deviation of the experimental to the calculated vibrational frequencies was 6.2, 12.0, 10.8, 13.2, and 13.5 cm(-1), for C(i)(), S(4), C(4), C(2), and C(s) conformations, respectively. This supports the above conclusion that 12c4 in the solid, liquid, and considered solution phases exists in the C(i) conformation.

Structural and vibrational study of the Ci(1) conformation of 18-crown-6

Optimized geometry, vibrational frequencies and IR absorption intensities were calculated for the Ci(1) conformation of 18c6. Optimized geometry was compared with the experimental geometry and that of the Ci(2) conformation of 18c6. The Ci(1) conformation is more planer than the Ci(2) conformation of 18c6, which provides an explanation that free 18c6 in the crystal phase has a Ci(1) conformation. Vibrational frequencies were scaled using an unvaried one-scale-factor scaling of 0.928. Calculated vibrational frequencies were compared with the experimental vibrational frequencies. The root-mean-square deviation of the difference between the calculated and experimental frequencies was only 15 cm(-1). This excellent agreement between the calculated and experimental frequencies is an indication of the proper assignment of the fundamental vibrational frequencies of the Ci(1) conformation of 18c6.

Theoretical study of the structure and vibrational spectra of the Ci(2) conformation of 18-crown-6

Optimized geometries of 18-crown-6 (18ce6) were calculated at the HF/6-31G* and B3LYP/6-31G* levels of theory for the D3d, Ci(1) and Ci(2) conformations. At the B3LYP level, the Ci(2) optimized geometry was higher in energy by 23.3 and 18.8 kcal mol(-1) than the Ci(1) and D3d optimized geometries, respectively. Harmonic force field, vibrational frequencies and IR absorption intensities were calculated at the corresponding optimized geometry at the B3LYP level for the Ci(2) conformation. Scaled Ci(2) frequencies were compared with the experimental frequencies of free 18ce6, Ci(1) conformation, and 18ce6-urea complex, Ci(2) conformation. This comparison showed possible misassignments in the fundamental vibrational frequencies of 18ce6.