Influence of the Tissue Collection Procedure on the Adipogenic Differentiation of Human Stem Cells: Ischemic versus Well-Vascularized Adipose Tissue

Clinical and basic science applications using adipose-derived stem cells (ADSCs) are gaining popularity. The current adipose tissue harvesting procedures introduce nonphysiological conditions, which may affect the overall performance of the isolated ADSCs. In this study, we elucidate the differences between ADSCs isolated from adipose tissues harvested within the first 5 min of the initial surgical incision (well-vascularized, nonpremedicated condition) versus those isolated from adipose tissues subjected to medications and deprived of blood supply during elective free flap procedures (ischemic condition). ADSCs isolated from well-vascularized and ischemic tissues positively immunostained for several standard stem cell markers. Interestingly, the percent change in the CD36 expression for ADSCs isolated from ischemic versus well-vascularized tissue was significantly lower in males than females (p < 0.05). Upon differentiation and maturation to adipocytes, spheroids formed using ADSCs isolated from ischemic adipose tissue had lower triglyceride content compared to those formed using ADSCs isolated from the well-vascularized tissue (p < 0.05). These results indicate that ADSCs isolated from ischemic tissue either fail to uptake fatty acids or fail to efficiently convert those fatty acids into triglycerides. Therefore, more robust ADSCs suitable to establish in vitro adipose tissue models can be obtained by harvesting well-vascularized and nonpremedicated adipose tissues.

Sexual Dimorphism's impact on adipogenesis: A three-dimensional in vitro model treated with 17β-estradiol and testosterone

Using a three-dimensional (3-D) in vitro culture model, we report the dose dependent effect of 17β-estradiol and testosterone on the adipogenic differentiation and maturation of human adipose derived stem cells (hASCs) obtained from female and male patients. Considering sexual dimorphism, we expected male and female adipocytes to respond differently to the sex steroids. Both male and female hASC spheroids were exposed to 100 nM and 500 nM of 17β-estradiol and testosterone either at the beginning of the adipogenic maturation (Phase I) to discourage intracellular triglyceride accumulation or exposed after adipogenic maturation (Phase II) to reduce the intracellular triglyceride accumulation. The results show that 17β-estradiol leads to a dose dependent reduction in intracellular triglyceride accumulation in female hASC spheroids compared to the both untreated and testosterone-treated cells. Affirming our hypothesis, 17β-estradiol prevented intracellular triglyceride accumulation during Phase I, while it stimulated lipolysis during Phase II. PPAR-γ and adiponectin gene expression also reduced upon 17β-estradiol treatment in female cells. Interestingly, 17β-estradiol and testosterone had only a modest effect on the male hASC spheroids. Collectively, our findings suggest that 17β-estradiol can prevent fat accumulation in adipocytes during early and late stages of maturation in females.

Preparation and optimization of an eggshell membrane-based biomaterial for GTR applications

OBJECTIVES

Guided Tissue Regeneration (GTR) is a popular clinical procedure for periodontal tissue regeneration. However, its key component, the barrier membrane, is largely collagen-based and is still quite expensive, posing a financial burden to the patients as well as healthcare systems and negatively impacting the patient's decision-making. Thus, our aim is to prepare a novel biomimetic GTR membrane utilizing a natural biomaterial, soluble eggshell membrane protein (SEP), which is economical as it comes from an abundant industrial waste from food and poultry industries, unlike collagen. Additive polymer, poly (lactic-co-glycolic acid) (PLGA), and a bioceramic, nano-hydroxyapatite (HAp), were added to improve its mechanical and biological properties.

METHODS

For this barrier membrane preparation, we initially screened the significant factors affecting its mechanical properties using Taguchi orthogonal array design and further optimized the significant factors using response surface methodology. Furthermore, this membrane was characterized using SEM, EDAX, and ATR-FTIR, and tested for proliferation activity of human periodontal ligament fibroblasts (HPLFs).

RESULTS

Optimization using response surface methodology predicted that the maximal tensile strength of 3.1 MPa and modulus of 39.9 MPa could be obtained at membrane composition of 8.9 wt% PLGA, 7.2 wt% of SEP, and 2 wt% HAp. Optimized PLGA/SEP/HAp membrane specimens that were electrospun on a static collector showed higher proliferation activity of HPLFs compared to tissue culture polystyrene and a commercial collagen membrane.

SIGNIFICANCE

From the results observed, we can conclude that SEP-based nanofibrous GTR membrane could be a promising, environment-friendly, and cost-effective alternative for commercial collagen-based GTR membrane products.

Antibacterial and biocompatible polyaniline-doped titanium oxide layers

Titanium anodization has been shown to produce crystalline oxides exhibiting photocatalytic reactions that form reactive oxygen species (ROS) when exposed to UV light. The ROS subsequently attack bacteria cells, and thus reduce bacteria attachment on titanium implant surfaces. Polyaniline (PANI) is a conductive polymer that has shown antibacterial properties when electropolymerized onto titanium. Our research group hypothesized the addition of PANI to crystalline titanium oxide surfaces would increase the available free electrons and thus increase photocatalytic activity (PCA). This research led to the development of a novel single-step anodization approach for PANI doping crystalline titanium oxide layers. The objective of the present study was to determine the proper aniline electrolyte concentration needed to maximize the PCA and reduce bacterial attachment on the formed oxides. Aniline concentrations up to 1 M were added into a 1 M sulfuric acid electrolyte. The formed oxides exhibited increased PANI surface coverage but decreased anatase and rutile crystalline titanium oxide phase formation with increasing aniline electrolyte concentrations. Despite exhibiting the lowest levels of anatase and rutile formation, the 0.75 M and 1 M aniline oxides with the greatest PANI surface coverage also exhibited the highest PCA levels. 1 M aniline oxides showed significantly higher PCA under UVA irradiation compared to oxides formed from aniline concentrations up to 0.5 M (p < 0.001). 0.75 M aniline oxides exhibited significant reductions in Staphylococcus aureus attachment with or without UVA irradiation compared to control oxides without PANI. MTT and live/dead assays confirmed cytocompatibility and nearly 100% cell viability for the PANI doped oxides.

Functionalized Collagen/Elastin-like Polypeptide Hydrogels for Craniofacial Bone Regeneration

Critical-sized cranial bone defects fail to re-ossify and require the surgical intervention of cranioplasty. To achieve superior bone healing in such cases, a hydrogel consisting of an interpenetrating network of collagen and elastin-like polypeptide to encapsulate bone morphogenetic protein-2 (BMP-2), doxycycline, and 45S5 Bioglass is developed. This hydrogel has an appropriate elastic modulus of 39 ± 2.2 kPa to allow proper handling during implantation. The hydrogel promotes human adipose-derived stem attachment, proliferation, and differentiation toward the osteogenic lineage, including the deposition of hydroxyapatite particles embedded within a collagenous fibrillar structure after 21 days of in vitro culture. After eight weeks of implantation of the acellular hydrogel in a critical-sized rat cranial defect model, only a small quantity of various pro-inflammatory (< 20 pg mg^-1 ) and anti-inflammatory (< 10 pg mg^-1 ) factors in the adjacent cranial tissue is noticed, indicating the overall biocompatibility of the hydrogel. Scanning electron microscopy evidenced the presence of new fibrous extracellular matrix and mineral aggregates at the defect site, with calcium/phosphorus ratio of 0.5 and 2.0 by eight and twelve weeks, respectively. Microcomputed tomography (Micro-CT) and histological analyses showed formation of mature mineralized tissue that bridged with the surrounding bone. Taken together, the acellular composite hydrogel shows great promise for superior bone healing after cranioplasty.

Synthesis of Biomimetic Melanin-Like Multifunctional Nanoparticles for pH Responsive Magnetic Resonance Imaging and Photothermal Therapy

The design and development of multifunctional nanoparticles have attracted great interest in biomedical research. This study aims to prepare pH-responsive melanin-like nanoparticles for T₁-weighted magnetic resonance imaging (MRI) and photothermal therapy. The new multifunctional nanoparticles (amino-Fe-PDANPs) are synthesized by copolymerization of dopamine and its derivative amino-N-[2-(diethylamino) ethyl]-3,4-dihydroxy-benzenepropanamide (N-Dopa) at room temperature. The size of nanoparticles can be controlled by NaOH concentration. The incorporation of N-Dopa is characterized by NMR and FT-IR. From transmission electron microscopy (TEM), the nanoparticles exhibit excellent dispersion stability in water and are spherical in shape. The MRI measurement has demonstrated that amino-Fe-PDANPs have a significant signal enhancement in responding to the acidic solution. Confirmed by the photothermal study, the nanoparticles exhibit a high photothermal conversion efficiency. The melanin-like multifunctional nanoparticles integrate both diagnosis and therapeutic functionalities, indicating the potential for theranostic application.

Surface modifications to enhance osseointegration-Resulting material properties and biological responses

As life expectancy and the age of the general population increases so does the need for improved implants. A major contributor to the failure of implants is poor osseointegration, which is typically described as the direct connection between bone and implant. This leads to unnecessary complications and an increased burden on the patient population. Modification of the implant surfaces through novel techniques, such as varying topography and/or applying coatings, has become a popular method to enhance the osseointegration capability of implants. Recent research has shown that particular surface features influence how bone cells interact with a material; however, it is unknown which exact features achieve optimal bone integration. In this review, current methods of modifying surfaces will be highlighted, and the resulting surface characteristics and biological responses are discussed. Review of the current strategies of surface modifications found that many coating types are more advantageous when used in combination; however, finding a surface modification that utilizes the mutual beneficial effects of important surface characteristics while still maintaining commercial viability is where future challenges exist.

Manipulating the solution environment to control the surface roughness of elastin-based polymer coatings

Elastin-like polypeptides (ELP) have been used as a genetically-engineered, biocompatible substitute for elastin. Cell culture coatings prepared using ELP conjugated to low molecular weight polyethyleneimine (PEI) entices cells to form three-dimensional cellular aggregates that mimic their in vivo counterparts. This study seeks to control the deposition of the ELP and ELP-PEI molecules to control the roughness of the final coatings. The two polymers were coated onto three different substrates (glass, polystyrene, tissue-culture polystyrene) and the solution environment was altered by changing the polymer concentration (0.5, 1.0, 1.5 mg/mL) and/or salt concentration (None, 0.2 M phosphate buffered saline) for a total of 36 conditions. Atomic force microscopy (AFM) was used to measure the average roughness (R_a) of the samples and found that ELP coated samples had a higher R_a than their ELP-PEI counterparts. The coatings were tested for stability by performing cell culture media changes every three days for 11 days. AFM showed that the average roughness of the tested samples increased with each media change. To address this, the surfaces were crosslinked using hexamethyl diisocyanate, which minimized the change in surface roughness even when subjected to an intense sonication process. This study provides parameters to achieve elastin-based coatings with controlled roughness that can be used to support stable, long-term in vitro cell culture.

Machine learning to determine optimal conditions for controlling the size of elastin-based particles

This paper evaluates the aggregation behavior of a potential drug and gene delivery system that combines branched polyethyleneimine (PEI), a positively-charged polyelectrolyte, and elastin-like polypeptide (ELP), a recombinant polymer that exhibits lower critical solution temperature (LCST). The LCST behavior of ELP has been extensively studied, but there are no quantitative ways to control the size of aggregates formed after the phase transition. The aggregate size cannot be maintained when the temperature is lowered below the LCST, unless the system exhibits hysteresis and forms irreversible aggregates. This study shows that conjugation of ELP with PEI preserves the aggregation behavior that occurs above the LCST and achieves precise aggregate radii when the solution conditions of pH (3, 7, 10), polymer concentration (0.1, 0.15, 0.3 mg/mL), and salt concentration (none, 0.2, 1 M) are carefully controlled. K-means cluster analyses showed that salt concentration was the most critical factor controlling the hydrodynamic radius and LCST. Conjugating ELP to PEI allowed crosslinking the aggregates and achieved stable particles that maintained their size below LCST, even after removal of the harsh (high salt or pH) conditions used to create them. Taken together, the ability to control aggregate sizes and use of crosslinking to maintain stability holds excellent potential for use in biological delivery systems.

Physicochemical and Antimicrobial Properties of Thermosensitive Chitosan Hydrogel Loaded with Fosfomycin

Thermosensitive chitosan hydrogels-renewable, biocompatible materials-have many applications as injectable biomaterials for localized drug delivery in the treatment of a variety of diseases. To combat infections such as Staphylococcus aureus osteomyelitis, localized antibiotic delivery would allow for higher doses at the site of infection without the risks associated with traditional antibiotic regimens. Fosfomycin, a small antibiotic in its own class, was loaded into a chitosan hydrogel system with varied beta-glycerol phosphate (β-GP) and fosfomycin (FOS) concentrations. The purpose of this study was to elucidate the interactions between FOS and chitosan hydrogel. The Kirby Bauer assay revealed an unexpected concentration-dependent inhibition of S. aureus, with reduced efficacy at the high FOS concentration but only at the low β-GP concentration. No effect of FOS concentration was observed for the planktonic assay. Rheological testing revealed that increasing β-GP concentration increased the storage modulus while decreasing gelation temperature. NMR showed that FOS was removed from the liquid portion of the hydrogel by reaction over 12 h. SEM and FTIR confirmed gels degraded and released organophosphates over 5 days. This work provides insight into the physicochemical interactions between fosfomycin and chitosan hydrogel systems and informs selection of biomaterial components for improving infection treatment.

Evaluation of machine learning algorithms to predict the hydrodynamic radii and transition temperatures of chemo-biologically synthesized copolymers

Elastin-like polypeptides (ELP) belong to a family of recombinant polymers that shows great promise as biocompatible drug delivery and tissue engineering materials. ELPs aggregate above a characteristic transition temperature (Tt). We have previously shown that the Tt and size of the resulting aggregates can be controlled by changing the ELP's solution environment (polymer concentration, salt concentration, and pH). When coupled to a synthetic polyelectrolyte, polyethyleneimine (PEI), ELP retains its Tt behavior and gains the ability to be crosslinked into defined particle sizes. This paper explores several machine learning models to predict the Tt and hydrodynamic radius (Rh) of ELP and two ELP-PEI polymers in varying solution conditions. An exhaustive design of experiments matrix consisting of 81 conditions of interest with varying salt concentration (0, 0.2, 1 M NaCl), pH (3, 7, 10), polymer concentration (0.1, 0.17, 0.3 mg/mL), and polymer type (ELP, ELP-PEI800, ELP-PEI10K) was investigated. The five models used in this study were multiple linear regression, elastic-net, support vector regression, multi-layer perceptron, and random forest. A multi-layer perceptron model was found to have the highest accuracy, with an R2 score of 0.97 for both Rh and Tt. This was followed closely by the random forest model, with an R2 of 0.94 for Rh and 0.95 for Tt. Feature importance was determined using the random forest and linear regression models. Both models showed that salt concentration and polymer type were the two most influential factors that determined Rh, while salt concentration was the dominant factor for Tt.

Comparison of the formation, adipogenic maturation, and retention of human adipose-derived stem cell spheroids in scaffold-free culture techniques

While three-dimensional spheroids outperform traditional two-dimensional monolayer culture for human adipose-derived stem cells (hASCs), there is not a consensus on the most successful method for enhancing their adipogenic differentiation and minimizing the loss of physiologically relevant, fatty spheroids during culture. To this end, we compared three culture methods, namely, elastin-like polypeptide-polyethyleneimine (ELP-PEI) coated surfaces, ultra-low attachment static culture, and suspension culture for their ability to form and retain productive hASC spheroids. The ELP-PEI coatings used the ELP conjugated to two molecular weights of PEI (800 or 25,000 g/mol). FTIR spectroscopy, atomic force microscopy, and contact angle goniometry revealed that the ELP-PEI coatings had similar chemical structures, surface topography, and hydrophobicity. Time-lapse microscopy showed that increasing the PEI molecular weight resulted in smaller spheroids. Measurement of triglyceride content showed that the three methods induced comparable differentiation of hASCs toward the adipogenic lineage. DNA content and morphometric analysis revealed merging of spheroids to form larger spheroids in the ultra-low attachment static culture and suspension culture methods. In contrast, the retention of hASC spheroid sizes and numbers with a regular spheroid size (~100 μm) were best atop the ELP-PEI800 coatings. Overall, this research shows that the spheroid culture atop the ELP-PEI coatings is a suitable cell culture model for future studies involving long-term, three-dimensional culture of mature adipocytes derived from hASCs.

Photocatalytic activity and antibacterial efficacy of UVA-treated titanium oxides

Studies have shown ultraviolet-A (UVA) irradiation of crystalline titanium oxides leads to the production of reactive oxygen species (ROS) via a photocatalytic process. The ROS exhibit antimicrobial properties that may be of benefit in preventing bacterial attachment to implant devices. Recent studies have suggested a potential benefit of mixed anatase and rutile oxides and dopants on the photocatalytic properties of titanium oxides. The goal of this work was to compare the photocatalytic activity of different anodized commercially pure titanium grade 4 (CPTi4) surfaces. CPTi4 specimens were anodized in three mixed-acid electrolytes to create crystalline oxide surfaces that were either primarily anatase, primarily rutile, or a combination of anatase and rutile. Additionally, the primarily anatase and combination oxides incorporated some phosphorous from the phosphoric acid component in the electrolyte. The photocatalytic activity of the anodized specimens was measured using both methylene blue (MB) degradation assay and comparing the attachment of S. aureus under irradiation with UVA light of differing intensities (1 mW/cm², 8 mW/cm², and 23 mW/cm²). Primarily rutile oxides exhibited significantly higher levels of MB degradation after exposure to 1 mW/cm² UVA lights. Primarily rutile specimens also had the largest reduction in bacterial attachment followed by the mixed phase specimens and the primarily anatase specimens at 1 mW/cm² UVA lights. Phosphorous-doped, mixed phase oxides exhibited an accelerated MB degradation response during exposure to 8 mW/cm² and 23 mW/cm² UVA lights. All anodized and unanodized CPTi4 groups revealed similar S. aureus attachment at the two higher UVA intensities. Although MB degradation assay and the bacteria attachment assay both confirmed photocatalytic activity of the oxides formed in this study, the results of the MB degradation assay did not accurately predict the oxides performance against S. aureus.

FT-IR Spectroscopic Analysis of the Secondary Structures Present during the Desiccation Induced Aggregation of Elastin-Like Polypeptide on Silica

Previously, we found that elastin-like polypeptide (ELP), when dried above the lower critical solution temperature on top of a hydrophilic fused silica disk, exhibited a dynamic coalescence behavior. The ELP initially wet the silica, but over the next 12 h, dewett the surface and formed aggregates of precise sizes and shapes. Using Fourier-transform infrared (FT-IR) spectroscopy, the present study explores the role of secondary structures present in ELP during this progressive desiccation and their effect on aggregate size. The amide I peak (1600-1700 cm-1) in the ELP's FT-IR spectrum was deconvoluted using the second derivative method into eight subpeaks (1616, 1624, 1635, 1647, 1657, 1666, 1680, 1695 cm-1). These peaks were identified to represent extended strands, β-turns, 3(10)-helix, polyproline I, and polyproline II using previous studies on ELP and molecules similar in peptide composition. Positive correlations were established between the various subpeaks, water content, and aggregate size to understand the contributions of the secondary structures in particle formation. The positive correlations suggest that type II β-turns, independent of the water content, contributed to the growth of the aggregates at earlier time points (1-3.5 h). At later time points (6-12 h), the aggregate growth was attributed to the formation of 3(10)-helices that relied on a decrease in water content. Understanding these relationships gives greater control in creating precisely sized aggregates and surface coatings with varying roughness.

OPTIMIZATION OF COLLAGEN-ELASTIN-LIKE POLYPEPTIDE-BIOGLASS SCAFFOLD COMPOSITION FOR OSTEOGENIC DIFFERENTIATION OF ADIPOSE-DERIVED STEM CELLS

We have developed a multicomponent hydrogel scaffold that can mimic the bone extracellular matrix by incorporating collagen, elastin-like polypeptide (ELP), and Bioglass. We examined the effects of Bioglass addition to collagen-ELP scaffolds on mechanical properties, physical characteristics, and in vitro osteogenic differentiation, by varying the Bioglass amount and particle size. Response surface methodology with a central composite design predicted 5 mg (6.6 mg/mL) Bioglass with a particle size of 142 ± 5 μm as the optimal amount and particle size to be mixed with 6 mg/mL collagen and 18 mg/mL ELP to obtain a combination of maximized compressive properties. Swelling ratio and FTIR spectroscopy indicated lower hydrophilicity and the presence of hydrophobic and secondary interactions between collagen, ELP, and Bioglass. Scanning electron microscopy showed a nanofibrous morphology of intermingled collagen-ELP-Bioglass network. In vitro osteogenic characterization using human adipose-derived stem cells revealed increased cell attachment and proliferation with increased ALP activity, osteocalcin content, and mineralized deposit formation during a three-week culture. Numerous mineralized deposits composed of calcium and phosphorous were shown by energy dispersive spectroscopy. Overall, our results show that the collagen-ELP-Bioglass multicomponent composites have enhanced mechanical properties with adequate physical features and cell culture properties for bone tissue engineering.

Collagen-Elastin-Like Polypeptide-Bioglass Scaffolds for Guided Bone Regeneration

The goals of this study are to evaluate the ability of the multicomponent collagen-elastin-like polypeptide (ELP)-Bioglass scaffolds to support osteogenesis of rat mesenchymal stem cells (rMSCs), demonstrate in vivo biocompatibility by subcutaneous implantation in Sprague-Dawley rats, monitor degradation noninvasively, and finally assess the scaffold's ability in healing critical-sized cranial bone defects. The collagen-ELP-Bioglass scaffold supports the in vitro osteogenic differentiation of rMSCs over a 3 week culture period. The cellular (rMSC-containing) or acellular scaffolds implanted in the subcutaneous pockets of rats do not cause any local or systemic toxic effects or tumors. The real-time monitoring of the fluorescently labeled scaffolds by IVIS reveals that the scaffolds remain at the site of implantation for up to three weeks, during which they degrade gradually. Micro-CT analysis shows that the bilateral cranial critical-sized defects created in rats lead to greater bone regeneration when filled with cellular scaffolds. Bone mineral density and bone microarchitectural parameters are comparable among different scaffold groups, but the histological analysis reveals increased formation of high-quality mature bone in the cellular group, while the acellular group has immature bone and organized connective tissue. These results suggest that the rMSC-seeded collagen-ELP-Bioglass composite scaffolds can aid in better bone healing process.

Milieu for Endothelial Differentiation of Human Adipose-Derived Stem Cells

Human adipose-derived stem cells (hASCs) have been shown to differentiate down many lineages including endothelial lineage. We hypothesized that hASCs would more efficiently differentiate toward the endothelial lineage when formed as three-dimensional (3D) spheroids and with the addition of vascular endothelial growth factor (VEGF). Three conditions were tested: uncoated tissue culture polystyrene (TCPS) surfaces that induced a 2D monolayer formation; elastin-like polypeptide (ELP)-collagen composite hydrogel scaffolds that induced encapsulated 3D spheroid culture; and ELP-polyethyleneimine-coated TCPS surfaces that induced 3D spheroid formation in scaffold-free condition. Cells were exposed to endothelial differentiation medium containing no additional VEGF or 20 and 50 ng/mL of VEGF for 7 days and assayed for viability and endothelial differentiation markers. While endothelial differentiation media supported endothelial differentiation of hASCs, our 3D spheroid cultures augmented this differentiation and produced more von Willebrand factor than 2D cultures. Likewise, 3D cultures were able to uptake LDL, whereas the 2D cultures were not. Higher concentrations of VEGF further enhanced differentiation. Establishing angiogenesis is a key factor in regenerative medicine. Future studies aim to elucidate how to produce physiological changes such as neoangiogenesis and sprouting of vessels which may enhance the survival of regenerated tissues.

Visualization of the temperature dependent rearrangement of SynB1 elastin-like polypeptide on silica using scanning electron microscopy

In this study, scanning electron microscopy (SEM) was used to observe the interaction between de-solvated SynB1-elastin-like polypeptide (SynB1-ELP) and silica at a temperature above ELP's lower critical solution temperature (LCST). ELP was seen to initially wet the surface of the silica before rearranging to form narrowly distributed spherical particles. After formation, the ELP particles dynamically rearranged to increase and subsequently decrease in size until 24 h at which time they collapsed. SEM and Energy Dispersive X-ray Spectroscopy revealed that the formation of a thin layer of salt from the PBS solution preceded the initial wetting of ELP on silica, which was shown to play a role in the continuous rearrangement of ELP. FT-IR revealed that the salt, in combination with the hydrophilic silica, trapped water that provided a repulsive surface to the hydrophobic ELP and forced the ELP to continuously minimize its surface area until the water evaporated. This behavior shows that ELP's thermo-responsive nature coupled with its hydrophobicity can be used to create ELP particles and surfaces that can reorganize with minimal water present.

Spheroid Culture System Confers Differentiated Transcriptome Profile and Functional Advantage to 3T3-L1 Adipocytes

This study highlights functional differences between 2-D monolayer and 3-D spheroid 3T3-L1 adipocyte culture models and explores the underlying genomic mechanisms responsible for the different phenotypes present. The spheroids showed higher triglyceride accumulation than the monolayer culture and further increase with larger spheroid size. Whole transcriptome analysis indicated significant differential expression of genes related to adipogenesis, including adipocytokine signaling, fatty acid metabolism, and PPAR-γ signaling. Spheroids also showed downregulation of matrix metalloproteinases (MMPs), integrin, actin-cytoskeleton associated genes, and Rho/GTPase3 expression relative to 2-D monolayer, indicating suppression of the Rho-ROCK pathway and thereby promoting adipogenic differentiation. When exposed to linoleic acid (500 μM) and TNF-α (125 ng/mL) to promote chronic adiposity, linoleic acid treatment resulted in increased intracellular triglycerides and subsequent TNF-α treatment resulted in significantly altered adipocytokine signaling, fatty acid metabolism, and PPAR signaling, in addition to upregulation of multiple MMPs in spheroids vs. monolayer. Overall, 3-D spheroids showed enhanced adipogenic phenotype as indicated by triglyceride synthesis and transcriptome changes while retaining sensitivity to a pro-inflammatory stimulus. The 3-D spheroid culture thus may provide a simple, convenient, and sensitive in vitro model to study adipocyte response to metabolic stresses relevant to clinical pathologies.

Photofunctionalization of anodized titanium surfaces using UVA or UVC light and its effects against Streptococcus sanguinis

UV light preirradiation of anodized titanium oxide layers has recently been shown to produce a photocatalytic effect that may reduce early bacterial attachment on titanium surfaces. Streptococcus species have been identified as primary early colonizers and contribute to early biofilm formation on dental implant surfaces. Anodized layers with primarily amorphous, primarily anatase, primarily rutile, and mixtures of anatase and rutile phase oxides were preirradiated with UVA or UVC light for 10 min. Nanoscale surface roughness and pre- and post-UV-irradiated wettability were measured for each anodization group. Sample groups were subjected to streptococcus sanguinis for a period of 24 h. Bacterial attachment and killing efficacy were measured and compared to the corresponding non-UV control groups. UVA treatments showed trends of at least a 20% reduction in bacterial attachment regardless of the crystallinity, or combination of oxide phases present. Anodized layers consisting of primarily anatase phase on the outermost surface were shown to have a killing efficacy of at least 50% after preirradiation with UVA light. Anodized layers containing disperse mixtures of anatase and rutile phases at the outermost surface showed at least a 50% killing efficacy after pre-irradiation with either UVA or UVC light. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2284-2294, 2018.

Adipogenic Differentiation of Human Adipose-Derived Stem Cells Grown as Spheroids

Understanding the process of adipogenesis is critical if suitable therapeutics for obesity and related metabolic diseases are to be found. The current study presents proof of feasibility of creating a 3-D spheroid model using human adipose-derived stem cells (hASCs) and their subsequent adipogenic differentiation. hASC spheroids were formed atop an elastin-like polypeptide-polyethyleneimine (ELP-PEI) surface and differentiated using an adipogenic cocktail. Spheroids were matured in the presence of dietary fatty acids (linoleic or oleic acid) and evaluated based on functional markers including intracellular protein, CD36 expression, triglyceride accumulation, and PPAR-γ gene expression. Spheroid size was found to increase as the hASCs matured in the adipocyte maintenance medium, though the fatty acid treatment generally resulted in smaller spheroids compared to control. A stable protein content over the 10-day maturation period indicated contact-inhibited proliferation as well as minimal loss of spheroids during culture. Spheroids treated with fatty acids showed greater amounts of intracellular triglyceride content and greater expression of the key adipogenic gene, PPAR-γ. We also demonstrated that 3-D spheroids outperformed 2-D monolayer cultures in adipogenesis. We then compared the adipogenesis of hASC spheroids to that in 3T3-L1 spheroids and found that the triglyceride accumulation was less profound in hASC spheroids than that in 3T3-L1 adipocytes, correlated with smaller average spheroids, suggesting a relatively slower differentiation process. Taken together, we have shown the feasibility of adipogenic differentiation of patient-derived hASC spheroids, which with further development, may help elucidate key features in the adipogenesis process.

Spheroid model for functional osteogenic evaluation of human adipose derived stem cells

3D culture systems have the ability to mimic the natural microenvironment by allowing better cell-cell interactions. We have prepared an in vitro 3D osteogenic cell culture model using human adipose derived stem cells (hASCs) cultured atop recombinant elastin-like polypeptide (ELP) conjugated to a charged polyelectrolyte, polyethyleneimine (PEI). We demonstrate that hASCs cultured atop the ELP-PEI coated tissue culture polystyrene (TCPS) formed 3D spheroids and exhibited superior differentiation toward osteogenic lineage compared to the traditional two dimensional (2D) monolayer formed atop uncoated TCPS. Live/dead viability assay confirmed >90% live cells at the end of the 3-week culture period. Over the same culture period, higher protein content was observed in 2D monolayer than 3D spheroids, as the 2D environment allowed continued proliferation, while 3D spheroids underwent contact-inhibited growth arrest. The normalized alkaline phosphatase (ALP) activity, which is an indicator for early osteogenic differentiation was higher for 3D spheroids. The normalized osteocalcin (OCN) production, which is an indicator for osteogenic maturation was also higher for 3D spheroids while 2D monolayer had no noticeable OCN production. On day 22, increased Alizarin red uptake by 3D spheroids showed greater mineralization activity than 2D monolayer. Taken together, these results indicate a superior osteogenic differentiation of hASCs in 3D spheroid culture atop ELP-PEI coated TCPS surfaces than the 2D monolayer formed on uncoated TCPS surfaces. Such enhanced osteogenesis in 3D spheroid stem cell culture may serve as an alternative to 2D culture by providing a better microenvironment for the enhanced cellular functions and interactions in bone tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1230-1236, 2017.

Three dimensional tumor models for cancer studies

It is well recognized that one of the major drawbacks of using traditional two dimensional cultures to model the living systems is inaccurately reflecting the physiological manner in which modulators, nutrients, oxygen, and metabolites are applied and removed. Moreover, the two dimensional culture system poorly reflects how different cell types interact with each other in the same microenvironment. Since the first global development of three dimensional (3D) cell culture techniques in the late 1960s, this last decade has seen an explosion of studies to promote 3D models in the fields of regenerative medicine and cancer. The recent surge of interest in 3D cell culture in cancer research is attributable to the interest in developing closer to real life models. The ability to include various cell types and extracellular components reflect more the physiological conditions of tumor microenvironment. In this short review, we will discuss different approaches of 3D culture system models and techniques with a focus on the 3D interactions of cancer cells with stromal cells in the goal to reevaluate old and develop new therapeutics.

Effect of amine content and chemistry on long-term, three-dimensional hepatocyte spheroid culture atop aminated elastin-like polypeptide coatings

Culture conditions that induce hepatic spheroidal aggregates sustain liver cells with metabolism that mimics in vivo hepatocytes. Here we present an array of elastin-like polypeptide conjugate coating materials (Aminated-ELPs) that are biocompatible, have spheroid-forming capacity, can be coated atop traditional culture surfaces, and maintain structural integrity while ensuring adherence of spheroids over long culture period. The Aminated-ELPs were synthesized either by direct conjugation of ELP and various polyelectrolytes or by conjugating both ELP and various small electrolytes to the reactive polymer poly(2-vinyl-4,4-dimethyl azlactone) (PVDMA). Spheroid morphology, cellular metabolic function, and liver-specific gene expression over the long-term, 20-day culture period were assessed through optical microscopy, measurement of total protein content and albumin and urea production, and quantitative real-time (qRT) PCR. We found that the amine content of the Aminated-ELP coatings dictated the initial hepatocyte attachment, but not the subsequent hepatocyte spheroid formation and their continued attachment. A lower amine content was generally found to sustain higher albumin production by the spheroids. Out of the 19 Aminated-ELP coatings tested, we found that the lysine-containing substrates comprising ELP-polylysine or ELP-PVDMA-butanediamine proved to consistently culture productive spheroidal hepatocytes. We suggest that the incorporation of lysine functional groups in Aminated-ELP rendered more biocompatible surfaces, increasing spheroid attachment and leading to increased liver-specific function. Taken together, the Aminated-ELP array presented here has the potential to create in vitro hepatocyte culture models that mimic in vivo liver functionality and thus, lead to better understanding of liver pathophysiology and superior screening methods for drug efficacy and toxicity. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 377-388, 2017.

Composition of elastin like polypeptide-collagen composite scaffold influences in vitro osteogenic activity of human adipose derived stem cells

OBJECTIVE

Collagen-based scaffolds for guided bone regeneration (GBR) are continuously improved to overcome the mechanical weaknesses of collagen. We have previously demonstrated superior mechanical characteristics of the elastin-like polypeptide (ELP) reinforced collagen composites. The objectives of this research were to evaluate the efficacy of ELP-collagen composites to culture human adipose-derived stem cells (hASCs) and allow them to undergo osteogenic differentiation. We hypothesized that hASCs would show a superior osteogenic differentiation in stiffer ELP-collagen composites compared to the neat collagen hydrogels.

METHODS

Composite specimens were made by varying ELP (0-18mg/mL) and collagen (2-6mg/mL) in a 3:1 ratio. Tensile strength, elastic modulus, and toughness were determined by uniaxial tensile testing. hASCs cultured within the composites were characterized by biochemical assays to measure cell viability, protein content, and osteogenic differentiation (alkaline phosphatase activity, osteocalcin, and Alizarin red staining). Scanning electron microscopy and energy dispersive spectroscopy were used for morphological characterization of composites.

RESULTS

All composites were suitable for hASCs culture with viable cells over the 22-day culture period. The ELP-collagen composite with 18mg/mL of ELP and 6mg/mL of collagen had greater tensile strength and elastic modulus combined with higher osteogenic activity in terms of differentiation and subsequent mineralization over a period of 3 weeks compared to other compositions. The extra-cellular matrix deposits composed of calcium and phosphorous were specifically seen in the 18:6mg/mL ELP-collagen composite.

SIGNIFICANCE

The success of the 18:6mg/mL ELP-collagen composite to achieve long-term, 3-dimensional culture and osteogenic differentiation indicates its potential as a GBR scaffold.

Three-dimensional spheroid cell model of in vitro adipocyte inflammation

To improve treatment of obesity, a contributing factor to multiple systemic and metabolic diseases, a better understanding of metabolic state and environmental stress at the cellular level is essential. This work presents development of a three-dimensional (3D) in vitro model of adipose tissue displaying induced lipid accumulation as a function of fatty acid supplementation that, subsequently, investigates cellular responses to a pro-inflammatory stimulus, thereby recapitulating key stages of obesity progression. Three-dimensional spheroid organization of adipose cells was induced by culturing 3T3-L1 mouse preadipocytes on an elastin-like polypeptide-polyethyleneimine (ELP-PEI)-coated surface. Results indicate a more differentiated phenotype in 3D spheroid cultures relative to two-dimensional (2D) monolayer analogues based on triglyceride accumulation, CD36 and CD40 protein expression, and peroxisome proliferator-activated receptor-γ (PPAR-γ) and adiponectin mRNA expression. The 3T3-L1 adipocyte spheroid model was then used to test the effects of a pro-inflammatory microenvironment, namely maturation in the presence of elevated fatty acid levels followed by acute exposure to tumor necrosis factor alpha (TNF-α). Under these conditions, we demonstrate that metabolic function was reduced across all cultures exposed to TNF-α, especially so when pre-exposed to linoleic acid. Further, in response to TNF-α, enhanced lipolysis, monitored as increased extracellular glycerol and fatty acids levels, was observed in adipocytes cultured in the presence of exogenous fatty acids. Taken together, our 3D spheroid model showed enhanced adipogenic differentiation and presents a platform for elucidating the key phenotypic responses that occur in pro-inflammatory microenvironments that characterize obesogenic states.

Characterizing the dielectric properties of human mesenchymal stem cells and the effects of charged elastin-like polypeptide copolymer treatment

HUMAN MESENCHYMAL STEM CELLS (HMSCS) HAVE THREE KEY PROPERTIES THAT MAKE THEM DESIRABLE FOR STEM CELL THERAPEUTICS: differentiation capacity, trophic activity, and ability to self-renew. However, current separation techniques are inefficient, time consuming, expensive, and, in some cases, alter hMSCs cellular function and viability. Dielectrophoresis (DEP) is a technique that uses alternating current electric fields to spatially separate biological cells based on the dielectric properties of their membrane and cytoplasm. This work implements the first steps toward the development of a continuous cell sorting microfluidic device by characterizing native hMSCs dielectric signatures and comparing them to hMSCs morphologically standardized with a polymer. A quadrapole Ti-Au electrode microdevice was used to observe hMSC DEP behaviors, and quantify frequency spectra and cross-over frequency of hMSCs from 0.010-35 MHz in dextrose buffer solutions (0.030 S/m and 0.10 S/m). This combined approach included a systematic parametric study to fit a core-shell model to the DEP spectra over the entire tested frequency range, adding robustness to the analysis technique. The membrane capacitance and permittivity were found to be 2.2 pF and 2.0 in 0.030 S/m and 4.5 pF and 4.1 in 0.10 S/m, respectively. Elastin-like polypeptide (ELP-) polyethyleneimine (PEI) copolymer was used to control hMSCs morphology to spheroidal cells and aggregates. Results demonstrated that ELP-PEI treatment controlled hMSCs morphology, increased experiment reproducibility, and concurrently increased hMSCs membrane permittivity to shift the cross-over frequency above 35 MHz. Therefore, ELP-PEI treatment may serve as a tool for the eventual determination of biosurface marker-dependent DEP signatures and hMSCs purification.

Effective release of a broad spectrum antibiotic from elastin-like polypeptide-collagen composite

Preparation of hydrogels that possess an effective antibiotic release profile and better mechanical properties compared to the traditionally used collagen hydrogels has the potential to minimize post-surgical infections and support wound healing. Toward this goal, we prepared elastin-like polypeptide (ELP)-collagen composite hydrogels that displayed a significantly higher elastic modulus compared to the collagen hydrogels. We then characterized the release behavior of the collagen and ELP-collagen hydrogels loaded with varying dosages (1-5% w/w) of a commonly used broad spectrum antibiotic, doxycycline hyclate. Both collagen and ELP-collagen hydrogels showed a gradual time dependent doxycycline release over a period of 5 days. The ELP-collagen hydrogels, in general, showed a slower release of the doxycycline compared to the collagen hydrogels. The released doxycycline was found to be effective against four bacterial strains (Escherichia coli, Pseudomonas aeruginosa, Streptococcus sanguinis, and methicillin-resistant Staphylococcus aureus) in a dose dependent manner. Combined with their improved mechanical properties, the gradual and effective drug release from the biocompatible ELP-collagen hydrogels shown here may be beneficial for drug delivery and tissue engineering applications.

A surface-tethered spheroid model for functional evaluation of 3T3-L1 adipocytes

In order to effectively treat obesity, it must be better understood at the cellular level with respect to metabolic state and environmental stress. However, current two-dimensional (2D) in vitro cell culture methods do not represent the in vivo adipose tissue appropriately due to the absence of complex architecture and cellular signaling. Conversely, 3D in vitro cultures have been reported to have optimal results mimicking the adipose tissue in vivo. The main aim of this study was to examine the efficacy of a novel conjugate of a genetically engineered polymer, elastin-like polypeptide (ELP) and a synthetic polymer, polyethyleneimine (PEI), toward creating a 3D preadipocyte culture system. We then used this 3D culture model to study the preadipocyte differentiation and adipocyte maintenance processes when subjected to various dosages of nutritionally relevant free fatty acids with respect to total DNA and protein content, cell viability, and intracellular triglyceride accumulation. Our results showed that 3T3-L1 preadipocytes cultured on the ELP-PEI surface formed 3D spheroids within 72 h, whereas the cells cultured on unmodified tissue culture polystyrene surfaces remained in monolayer configuration. Significant statistical differences were discovered between the 3D spheroid and 2D monolayer culture with respect to the DNA and protein content, fatty acid consumption, and triglyceride accumulation, indicating differences in cellular response. Results indicated that the 3D culture may be a more sensitive modeling technique for in vitro adipocyte culture and provides a platform for future evaluation of 3D in vitro adipocyte function.

Spheroid organization kinetics of H35 rat hepatoma model cell system on elastin-like polypeptide-polyethyleneimine copolymer substrates

Though two-dimensional systems have yielded some success in deriving morphological and functional markers of hepatocyte culture, they largely fail to capture the three-dimensional organization, long-term viability, and functionality of the hepatic tissue. We have engineered a system for inducing self-assembly of model H35 rat hepatoma spheroids using a copolymer comprised of biocompatible elastin-like polypeptide (ELP) chemically conjugated to positively charged polyethyleneimine (PEI). We have achieved a conjugation ratio of 30 mol %, though our studies analyzing spheroid organization kinetics indicate conjugate ratios of 5 mol % and greater to be optimal for cell culture based on least variability in spheroid sizes and minimum incidence of overgrown aggregates. Furthermore, our ELP-PEI system indicated the potential for influencing ultimate spheroid dimensions, with spheroid size inversely related to polyelectrolyte conjugation. Overall, this study provides a good starting point to investigate functional correlations between spheroid size and functional markers and their future use as an in vitro diagnostic or tissue engineering tool.

Preparation and characterization of elastin-like polypeptide scaffolds for local delivery of antibiotics and proteins

Tissue engineering applications could benefit from simultaneous release of growth factors, signaling molecules, and antibiotics to obtain optimal healing of tissues. Elastin-like polypeptides (ELPs) are genetically engineered polymers that possess good biocompatibility, are biodegradable, and exhibit mechanical properties similar to natural elastin. In addition, ELPs exhibit a characteristic inverse phase transition temperature (T(t)). This T(t) behavior is widely exploited in hyperthermia mediated drug delivery. The objectives of this research were to prepare ELP hydrogel scaffolds using a novel ultrasonication method and to investigate the release of a model protein (bovine serum albumin, BSA) and a commonly used antibiotic in periodontal therapy (doxycycline) from the scaffolds at two different temperatures (25 °C <T(t) vs. 37 °C >T(t)). Both BSA and doxycycline showed a gradual time dependent release and showed a trend of higher release fractions with higher loading doses. Based on the comparison between the release profiles at the two selected temperatures, the release was higher at 37 °C compared to that at 25 °C for both the loading concentrations of doxycycline (0.05 and 0.1 % v/v) and only one of the loading concentrations of BSA (0.5 % v/v) studied, while the release was higher at 25 °C compared to that at 37 °C only for the other loading concentration of BSA (1 % v/v) studied. These results suggested that the drug molecular weight and loading concentration were significant factors that affected the release kinetics. The experiments in this study demonstrated that the ELP hydrogel scaffolds can successfully release proteins and antibiotics critical to tissue engineering.

In vitro evaluation of elastin-like polypeptide-collagen composite scaffold for bone tissue engineering

OBJECTIVES

Collagen and elastin are two key structural proteins found in the extra-cellular matrices (ECMs) of most tissues, yet very little is known about the response of bone cells to elastin or its derivatives. Recently, we have designed and characterized a novel class of ECM-based composite scaffolds with collagen and a genetically engineered polymer, elastin-like polypeptide (ELP) and subsequently showed their superior mechanical properties and drug release characteristics compared to collagen scaffolds. The objective of this research was to evaluate osteoblast growth and expression on these composite scaffolds.

METHODS

A thorough biochemical and morphological characterization was performed on MC3T3-E1 pre-osteoblast cells cultured on collagen and ELP-collagen scaffolds. Cell viability was assessed using a live/dead assay. Total DNA content of all cells present on various surfaces was quantified. Pre-osteoblast differentiation was assessed by measuring the alkaline phosphatase and osteocalcin production. Mineral deposition by the cultured cells was visualized using the Von Kossa stain.

RESULTS

Our results showed that the ELP-collagen scaffolds were suitable substrates for cell culture that allowed MC3T3-E1 pre-osteoblast cell attachment, differentiation, and subsequent mineralization over a period of 3 weeks. The ELP-collagen scaffolds displayed equivalent biocompatibility and cell-interacting properties to those of the neat collagen scaffolds.

SIGNIFICANCE

The novel ELP-collagen composite material may have future implications as a scaffold material for bone tissue engineering applications, for example, the treatment of alveolar bone loss.

Use of three-dimensional spheroids of hepatocyte-derived reporter cells to study the effects of intracellular fat accumulation and subsequent cytokine exposure

Non-alcoholic fatty liver disease (NAFLD) is a family of liver diseases associated with obesity. Initial stage of NAFLD is characterized by a fatty liver, referred to as steatosis, which progresses in some individuals to non-alcoholic steatohepatitis (NASH) and liver failure. In order to study and treat the many liver diseases such as NAFLD, an improved in vitro cellular model is needed. Several studies in the past have attempted to elucidate these mechanisms using primary hepatocytes or relevant hepatoma cell lines in two-dimensional (2D) monolayer in vitro cultures. These 2D planar culture systems, unfortunately, do not represent the complex architecture of hepatic tissue in vivo. Therefore, we have engineered an elastin-like polypeptide (ELP)-polyethyleneimine (PEI) copolymer and shown that ELP-PEI coated surfaces influenced H35 rat hepatoma cell morphology to create 3D spheroids. Our reporter cell model recapitulates many cellular features of the human disease, including fatty acid uptake, intracellular triglyceride accumulation, decreased proliferation, decreased liver-specific function, and increased reactive oxygen species accumulation. Finally, to demonstrate the utility of the reporter cells for studying transcriptional regulation, we compared the transcriptional dynamics of nuclear factor κB (NFκB) in response to its classical inducer (tumor necrosis factor-α, TNF-α) under lean and fatty conditions in both 2D and 3D culture configurations. We found that, in 3D spheroids, linoleic acid treatment activated NFκB at earlier time points during the development of steatosis, but suppressed the TNF-mediated NFκB activation at later time points. These studies therefore provide a good starting point to evaluate such relationships observed during NAFLD in a 3D in vitro cell culture.

Development of an in vitro cell culture model of hepatic steatosis using hepatocyte-derived reporter cells

Fatty liver disease is a problem of growing clinical importance due to its association with the increasingly prevalent conditions of obesity and diabetes. While steatosis represents a reversible state of excess intrahepatic lipid, it is also associated with increased susceptibility to oxidative and cytokine stresses and progression to irreversible hepatic injury characterized by steatohepatitis, cirrhosis, and malignancy. Currently, the molecular mechanisms underlying progression of this dynamic disease remain poorly understood, particularly at the level of transcriptional regulation. We recently constructed a library of stable monoclonal green fluorescent protein (GFP) reporter cells that enable transcriptional regulation to be studied dynamically in living cells. Here, we adapt the reporter cells to create a model of steatosis that will allow investigation of transcriptional dynamics associated with the development of steatosis and the response to subsequent "second hit" stresses. The reporter model recapitulates many cellular features of the human disease, including fatty acid uptake, intracellular triglyceride accumulation, increased reactive oxygen species accumulation, decreased mitochondrial membrane potential, increased susceptibility to apoptotic cytokine stresses, and decreased proliferation. Finally, to demonstrate the utility of the reporter cells for studying transcriptional regulation, we compared the transcriptional dynamics of nuclear factor kappaB (NFkappaB), heat shock response element (HSE), and glucocorticoid response element (GRE) in response to their classical inducers under lean and fatty conditions and found that intracellular lipid accumulation was associated with dose-dependent impairment of NFkappaB and HSE but not GRE activation. Thus, steatotic reporter cells represent an efficient model for studying transcriptional responses and have the potential to provide important insights into the progression of fatty liver disease.

Grafting amine-terminated branched architectures from poly(L-lactide) film surfaces for improved cell attachment

Poly(L-lactide) (PLL) has been used as a bioabsorbable material in the medical and pharmaceutical fields. The unmodified hydrophobic PLL surface generally has low cell affinity; thus, modification of PLL film surface properties is necessary to improve its use as a biomaterial. Our surface modification method involved the use of photografting and typical wet chemistry to create branched architectures containing amine functionalities on the periphery of the grafted layers. Amine (-NH2) groups were first introduced on the PLL film surface by photoinduced grafting of 4,4'-diaminobenzophenone and the grafted branched architectures were created by subsequent reactions with succinic acid and tris(2-aminoethyl) amine. The resulting film surface was analyzed using contact angle goniometry and X-ray photoelectron spectroscopy. MC3T3 fibroblasts were cultured on unmodified PLL film and PLL films grafted with the branched structures and the films were subsequently analyzed by optical microscopy. The contact angle goniometry results showed an initial decrease and subsequent plateau in the water contact angles for the PLL films with each successive generation of the branched architectures. The X-ray photoelectron spectroscopy data provided insight into the structure of the grafted layer and revealed an increase in the nitrogen content with each generation. Optical micrographs showed enhanced cell attachment and viability on the surface-modified PLL films.