Automated graptolite identification at high taxonomic resolution using residual networks

Graptolites, fossils significant for evolutionary studies and shale gas exploration, are traditionally identified visually by taxonomists due to their intricate morphologies and preservation challenges. Artificial intelligence (AI) holds great promise for transforming such meticulous tasks. In this paper, we demonstrate that graptolites can be identified with taxonomist accuracy using a deep learning model. We construct the most sophisticated and largest professional single organisms image dataset to date, which is composed of >34,000 images of 113 graptolite species annotated at pixel-level resolution to train the model, develop, and evaluate deep learning networks to classify graptolites. The model's performance surpassed taxonomists in accuracy, time, and generalization, achieving 86% and 81% accuracy in identifying graptolite genus and species, respectively. This AI-based method, capable of recognizing minute morphological details better than taxonomists, can be integrated into web and mobile apps, extending graptolite identification beyond research institutes and enhancing shale gas exploration efficiency.

[Treatment strategy of congenital tracheal stenosis associated with non-vascular ring cardiac malformations]

Objective: To examine the treatment strategy of congenital tracheal stenosis associated with non-vascular ring cardiac malformations. Methods: This is a retrospective case series. Clinic data from 24 children with tracheal stenosis who underwent surgical treatment in the Department of Cardiac Surgery, Children's Hospital Affiliated to Shandong University from February 2017 to March 2023 were retrospectively collected. There were 16 males and 8 females, aged (M(IQR)) 6.5 (19.6) months (range: 2.2 to 66.3 months) and weighted 5.95 (4.76) kg (range: 3.2 to 20.0 kg). All patients had obvious respiratory symptoms. Eighteen patients underwent cardiac malformation correction and tracheoplasty at the same time (simultaneous group). Six patients in the staged operation group were treated with cardiac malformation correction in the first stage operation and tracheoplasty in the second stage operation due to missed diagnosis or delayed diagnosis of tracheal stenosis or no condition for tracheoplasty. Slide tracheoplasty was used to correct tracheal stenosis in both groups. The recovery of the children was followed. Wilcoxon sign rank test was used for comparison between the two groups. Results: There was no death during the perioperative period and hospitalization. In the simultaneous group, 1 case with delayed chest closure underwent bedside chest closure after 52 hours, 2 cases were intubated again after operation, and 1 case was implanted with an endotracheal stent. The duration of mechanical ventilation was 40.5 (39.6) hours (range: 19.0 to 438.8 hours). In the staged group, there was 1 case of re-intubation after operation, combined with left vocal cord paralysis and respiratory multidrug-resistant bacterial infection (Acinetobacter baumanii). One patient underwent 3 times of bronchoscopic balloon dilatation of the right middle bronchus, and heart rate returned to normal range. The duration of mechanical ventilation was 19.0 (21.4) hours (range: 17.1 to 96.7 hours). During follow-up, a patient in the simultaneous group was prone to respiratory infection and had good exercise tolerance, 1 patient in the staged group still had sputum stridor in the throat 3 months after the operation, and symptoms improved significantly 6 months after the operation. The other children didn't have obvious respiratory symptoms. Conclusions: The diagnosis of tracheal stenosis may be delayed or missed when tracheal stenosis is complicated by non-vascular ring cardiac malformations. One-stage correction of tracheal stenosis and cardiac malformation can achieve a good outcome.

[The association of renalase single-nucleotide polymorphisms rs2576178 and rs10887800 with hypertension in patients with obstructive sleep apnea]

Objective: To evaluate the associations between the renalase single-nucleotide polymorphisms rs2576178 and rs10887800 and the risk of hypertension in OSA patients. Methods: A total of 3, 570 male OSA subjects diagnosed via standard polysomnography were included in this retrospective study. We recorded anthropometric, genomic, and polysomnographic parameters and blood pressure levels. All subjects were divided into four groups based on quartiles of the apnea-hypopnea index (AHI). The relationships between rs2576178 and rs10887800 and the risk of hypertension were evaluated using the binary logistic regression, and haplotype analysis. Results: In the bottom AHI quartile, rs10887800 was significantly associated with the risk of hypertension according to the dominant model [odds ratio(OR)=0.691, 95% confidence interval (CI)=0.483-0.990, P=0.044] even after adjustment for age, sex, and the body mass index. The G-A haplotype was associated with a co-effect of the two SNPs, namely, the risk of hypertension decreased (OR=0.879, 95%CI=0.784-0.986, P=0.028). Conclusions: We find no association between single rs2576178 or rs10887800 variants with the risk of hypertension in our OSA population. But, the synergistic effect of the two polymorphisms is associated with the risk of hypertension in OSA patients.

[Surgical treatment strategy of pulmonary artery sling: a series of 110 cases]

Objective: To examine the effect of surgical treatment in children with pulmonary artery sling and the surgical treatment strategy. Methods: Relevant data of 110 children with pulmonary artery sling admitted to the Department of Cardiac Surgery, Children's Hospital Affiliated to Shandong University from February 2017 to July 2022 were retrospectively analyzed. There were 55 males and 55 females, aging (M(IQR)) 9.0 (10.6) months (range: 1 to 96 months). The weight was 7.8 (3.5) kg (range: 2.5 to 25.0 kg). Of the 110 patients, 108 had different degrees of tracheal stenosis and 2 had normal trachea. Left pulmonary artery transplantation and tracheoplasty were performed in 78 patients. Left pulmonary artery transplantation was performed in 30 patients (11 in our hospital and 19 in other hospitals) due to the lack of an early tracheoplasty technique, in which 24 patients needed stage Ⅱ tracheoplasty due to obvious respiratory symptoms and limited activity endurance, and 6 cases did not intervene. Two children with normal trachea only underwent left pulmonary artery transplantation. Results: Among the 78 children who underwent surgery in the same period, 70 cases recovered smoothly after surgery, of whom respiratory symptoms were significantly reduced or disappeared during the 1 to 65 months follow-up, with similar activity endurance to normal children of the same age. Eight cases died, including 4 cases of postoperative multi-drug resistant bacteria infection, died from tracheal anastomotic opening or septic shock, 1 cases with severe congenital heart disease died from postoperative low cardiac output syndrome difficult to correct, 1 case died from blood pressure could not be maintained due to the compressed left pulmonary artery after transplantation, 2 cases of postoperative digestive system diseases (adhesive intestinal obstruction, gastrointestinal bleeding, etc.). The 24 patients in the staging group were followed for 1 to 84 months. All patients needed stage Ⅱ tracheoplasty due to respiratory symptoms and decreased endurance to activity. Eight cases of the non-intervention tracheal group were successfully separated from the ventilator, cured and discharged in a short period of time. Conclusions: Most children with pulmonary artery sling have tracheal stenosis. Children with low degree of tracheal stenosis and inconspicuous respiratory symptoms can only undergo left pulmonary artery transplantation by lateral thoracotomy. For patients combined with severe tracheal stenosis or obvious respiratory symptoms, a simultaneous left pulmonary artery transplantat and tracheoplasty is recommended.

Numerical simulation and testing of laser-MIG hybrid-welding angle-structure sheets

Numerical simulation and experimental investigation of laser-MIG hybrid angle-welding low-carbon 1.5-mm-thin SPCC steel sheets are presented in this work. The transient simulation analysis provides an access to the thermal-fluid phenomena prediction by employing a hybrid three-dimensional heat source model. Special attention is paid to the melt dynamic behaviors within the triangular molten pool affected by the Marangoni convection. The simulation results show that the temperature and its gradient distribution are symmetrical with respect to the laser beam, which is validated well by the experimental study. The microstructure of the welded joints was analyzed by scanning electron microscopy and transmission electron microscopy. The results show that the cross-section microstructures of welded joint are mainly composed of the weld zone, narrow heat-affected zone, and substrate. The semielliptic-like molten pool shape is consistent with that of the simulated results. The finer microstructure in the weld bead results from the rapid cooling rate of laser welding confirmed by the FEM calculation. The columnar and equiaxed dendrites are formed in the peripheral and central region of the molten pool, which is beneficial for the improvement of the microhardness.

Shallow-marine testate amoebae with internal structures from the Lower Devonian of China

Testate amoebae, a polyphyletic protist group inhabiting a wide variety of extant ecosystems, have evolved as far back as early Neoproterozoic. However, their fossil record is discontinuous and biased toward empty shells. Here, we report an arcellinid testate amoeba species, Cangwuella ampulliformis gen. nov., sp. nov., from a shallow-marine community in the Early Devonian of Guangxi, southwestern China. With the aid of scanning electron microscopy and X-ray micro-tomography, we find that the shell of our testate amoeba contains some acetabuliform structures. Although such configuration does not match exactly with the known internal structures in extant testate amoebae, our fossils highlight the potential of exploring the ecological relationships between fossil testate amoebae and their associated organisms, and increase our knowledge on the diversity of testate amoebae in Early Devonian environments.

[HIV/AIDS surveillance in men who have sex with men aged 15-24 based on internet in Fuzhou,2016-2021]

Objective: To analyze HIV/AIDS surveillance data in men who have sex with men (MSM) aged from 15 to 24 years in Fuzhou and understand the HIV infection status in MSM and related factors. Methods: From 2016 to 2021, MSM aged 15-24 years who had oral or anal sex with men in the past 6 months were recruited through internet, and their demographic and behavioral characteristics, HIV antibody positive rate and risk factors were analyzed. Results: From 2016 to 2021, a total of 4 234 MSM aged 15-24 years were surveyed. The proportion of MSM from other provinces increased from 13.00% (85/654) to 23.42% (163/696) (trend χ²=60.23, P<0.001); and the proportion of MSM seeking male partners through internet increased from 93.27% (610/654) to 99.71% (694/696) (trend χ²=65.20, P<0.001); In the last anal sex in the past 6 months, the proportion of MSM using condom decreased from 88.16% (484/549) to 74.11% (415/560) (trend χ²=32.32, P<0.001); and in the past 6 months, the proportion of MSM using condom at each anal sex decreased from 65.76% (361/549) to 55.54% (311/560) (trend χ² =6.82, P<0.001); The proportion of MSM with HIV antibody testing increased from 5.66% (37/654) to 25.29% (176/696) (trend χ²=98.51, P<0.001). The cumulative HIV antibody positive rate in the MSM was 3.64% (154/4 234), and there was no significant difference in annual HIV antibody positive rate in the MSM (trend χ²=0.50, P=0.453). The HIV antibody positive rate in the MSM with education level of junior high school or below and the MSM living in Fuzhou for 1-2 years showed an upward trend (P<0.05). The results of multivariate logistic regression analysis showed that the risk for HIV infection in the MSM with education level of high school or technical secondary school was 0.54 times higher than that in those with education level of junior high school or below (95%CI: 0.30-0.99), and the risk for HIV infection in the MSM with education level of junior college or below was 0.29 times higher than that in those with education level of junior high school or below (95%CI: 0.17-0.51). The risk for HIV infection in the MSM who lived in Fuzhou for 1-2 years was 0.35 times higher than that in those who lived in Fuzhou for less than 1 year (95%CI: 0.16-0.74), the risk for HIV infection in the MSM who lived in Fuzhou for more than two years was 0.58 times higher than that in those who lived in Fuzhou for less than 1 year (95%CI: 0.37-0.91). The number of MSM using condoms at each anal sex was 0.18 times higher than that in the those never using condoms (95%CI: 0.08-0.42), and the number of the MSM who didn't suffered from sexually transmitted diseases was 0.25 times higher than that in those who suffered from sexually transmitted diseases (95%CI: 0.13-0.50). Conclusions: The MSM aged 15-24 years in Fuzhou have higher risk for HIV infection, and internet based intervention should be strengthened in adolescent MSM without permanent residence and with low education level.

New insights into the South China Lower Devonian flora based on fossils from Hezhang, Guizhou Province

The Early Devonian flora of South China is composed of many endemic members and has been studied mainly based on Yunnan materials. We in this study report a new Lower Devonian plant locality, recognize four sub-regions of the Early Devonian flora from South China and furthermore demonstrate these plants' distribution pattern and probable dispersal route. The new finds of plant fossils are from the Lower Devonian of Hezhang County, Guizhou Province, and include Zosterophyllopsida Demersatheca and Euphyllophytopsida Pauthecophyton. Demersatheca contigua, consisting of cylindrical strobili with four longitudinal rows of sporangia decussately arranged, shows great similarities to the plant from Yunnan and Guangxi localities. Pauthecophyton hezhangensis sp. nov. has distinct fertile units with grouped sporangia and each unit with two or three fusiform sporangia. The new locality belongs to the Guizhou sub-region and shares some taxa with the eastern Yunnan and Cathaysia sub-regional floras within South China, in which the shared plant members are distributed around the epicontinental sea. We suggest that the Guizhou sub-region might act as a bridge during plant dispersal from eastern Yunnan to Cathaysia Oldland in the Early Devonian. This article is part of the theme issue 'The impact of Chinese palaeontology on evolutionary research'.

[Sleep quality and sleep disturbances in Chinese pregnant women: a multicenter cross-sectional study]

Objective: This study aims to investigate the sleep quality of pregnant women in Xuhui District, Shanghai, and the related factors of sleep disturbances during pregnancy. Methods: From February 2019 to February 2021, we used online integrated sleep questionnaire (including PSQI, BQ, ESS, AIS) in Shanghai Jiao Tong University School of Medicine Affiliated Sixth People's Hospital, The International Peace Maternity and Child Health Hospitals of China Welfare Institution, and Shanghai Eighth People's Hospital, to investigate the sleep quality across pregnancy. We also collected maternal physical examination results, childbearing history, sociodemographic, and other clinical data. The prevalences and related factors of various sleep disturbances in pregnant women were analyzed, including insufficient/excessive nighttime sleep, low sleep efficiency, difficulty falling asleep, poor sleep quality, insomnia, daytime sleepiness, and high risk of sleep-disordered breathing (SDB). Results: This study includes 1 898 cases in the first trimester (T1), 3 099 cases in the second trimester (T2), and 1 539 cases in the third trimester (T3). Poor sleep quality (38.6%), daytime sleepiness (mild 41.9%, moderate 17.7%, severe 2.1%), and suspicious insomnia (32.3%) are most prevalent among women in T1 (P<0.01). In comparison, short sleep time (2.7%), long sleep time (8.6%), difficulty falling asleep (12.2%), poor sleep efficiency (35.4%), very poor sleep quality (6.7%), clinical insomnia (21.8%), and high-risk SDB (6.4%) are most prevalent among women in T3 (P<0.05). During pregnancy, late gestation (OR=1.016, 95%CI: 1.006-1.025) and multiple induced/drug abortions (OR=1.329, 95%CI: 1.043-1.692) are risk factors for poor sleep quality (PSQI>5), while multiple full-term deliveries (OR=0.800, 95%CI: 0.675-0.949) is its protective factor. Advanced maternal age (OR=0.976, 95%CI: 0.956-0.997), multiple full-term deliveries (OR=0.808, 95%CI: 0.680-0.959), late gestation (OR=0.983, 95%CI: 0.974-0.992) and hypertension (OR=0.572, 95%CI: 0.401-0.814) are protective factors for daytime sleepiness (ESS>6). The high-risk pregnancy category (OR=9.312, 95%CI: 1.156-74.978) is a risk factor for insomnia (AIS≥4), while multiple full-term deliveries (OR=0.815, 95%CI: 0.691-0.961) is its protective factor. High BMI (OR=1.334, 95%CI: 1.270-1.402) and hypertension (OR=4.427, 95%CI: 2.539-7.719) are risk factors for high-risk SDB in pregnant women. Conclusions: The prevalences of various sleep disturbances are high throughout pregnancy. Noticeably, symptoms of maternal SDB develop along with pregnancy. Different types of sleep disturbances are associated with different factors. Women of high-risk pregnancy category, in late gestation, with high BMI, hypertension, a history of induced/drug abortion, or without a history of full-term delivery can be at high risk of sleep disturbances during pregnancy.

[Obstructive sleep apnea and metabolic syndrome: an association study based on a large sample clinical database]

Objective: To investigate the prevalence and associated risk factors of metabolic syndrome (MS) in patients with obstructive sleep apnea (OSA). Methods: From July 2007 to June 2017, a total of 8 155 adult subjects, including 6 484 males and 1 671 females, aged 18-90 (43.13±12.28), body mass index 14.61~59.56 (25.59±3.98) kg/m²,who were admitted to the Department of Otorhinolaryngology head and Neck surgery of The Sixth People's Hospital affiliated to Shanghai Jiao Tong University, were retrospectively analyzed. All patients underwent polysomnography and biochemical tests. Subjects were divided into four groups (non-OSA, mild OSA, moderate OSA, and severe OSA) according to OSA severity. The prevalence of MS was expressed as percentage, and the correlation between OSA and MS and its characteristic pathophysiological indicators was evaluated by logistic regression model after adjusting for factors such as gender, age, BMI, neck circumference, hip circumference, smoking and alcohol consumption, and was expressed by odds ratio (OR). SPSS 25.0 software was used for statistical analysis. Results: The overall prevalence of MS was 43.6%, and that of non-/mild/moderate/severe OSA group was 18.6%, 30.4%, 43.8%, 57.1%.Logistic regression showed that patients with mild/moderate/severe OSA had an increased risk of MS compared with non-OSA patients, with adjusted OR values and confidence intervals of 1.27 (1.05-1.54), 1.84 (1.53-2.22), and 2.08 (1.76-2.46), respectively (P<0.01).In addition, indicators of OSA anoxic burden [oxygen drop index(T_oxygen=7.1), minimum blood oxygen(T_minimum=56.3), blood oxygen saturation below 90% cumulative time ratio (T_CT90=10.6) ]were closely associated with MS disease(P<0.01), but sleep fragmentation index (arousals index) was not significantly associated with MS disease. Conclusion: The risk of MS gradually increases with the severity of OSA, and the indicators reflecting OSA hypoxia burden are closely related to MS disease.

[Analysis on influencing factors of deaths from severe heat stroke in Shanghai, 2013-2017]

Objective: To explore the related factors of death from severe heat stroke in Shanghai from 2013 to 2017. Methods: The data of 1 152 patients with severe heat stroke who were divided into survival (n=1 037) and death (n=115) groups including gender, age and heat stroke type (heat cramp, heat exhaustion, heat apoplexy and the mixed type) were collected from meteorological bureau and case report system for high temperature heat stroke in Shanghai from 2013 to 2017. Meanwhile, the meteorological data of the onset date of severe heat stroke cases were collected, including maximum temperature, minimum temperature, daily temperature, relative humidity, air pressure, precipitation and wind speed. The differences of individual and meteorological factors between the two groups were compared, and multivariate logistic regression model was used to analyze the related factors of death from severe heat stroke. Results: Among 1 152 cases, the mean±SD of age was (56.29±18.95) years old, 843 (73.18%)were male, 962 (83.51%) were in the heat wave period; 322 cases (27.95%) were heat cramp, 170 cases (14.76%) were heat exhaustion, 533 cases (46.27%) were heat apoplexy and 114 cases (9.90%) were the mixed type. Daily average temperature ((32.81±1.99) ℃), daily maximum and minimum temperatures ((38.20±2.24) ℃ and (29.22±1.94) ℃) in survival group were lower than those in death group (all P values<0.001), which were (33.76±1.17) ℃, (39.19±1.31) ℃ and (29.72±1.66) ℃. Daily average relative humidity ((60.36±9.75)%) and daily minimum relative humidity ((41.26±9.71)%) in survival group were higher than those in death group(allP values <0.05), which were (54.59±6.89)% and (35.60±7.24)%. The results of logistic regression analysis suggested that compared with the cases with daily average humidity <60% and a mixed type heat stroke, the death OR (95%CI) values of cases with daily average humidity >60%, heat cramp, heat exhaustion and heat apoplexy were 0.31 (0.18,0.54), 0.13 (0.05,0.34), 0.68 (0.58,2.30) and 0.87 (0.48,1.58). Conclusion: The temperature, relative humidity and the type of heat stroke were the main related factors affecting the prognosis of severe heat stroke.

Unique growth strategy in the Earth's first trees revealed in silicified fossil trunks from China

Cladoxylopsida included the earliest large trees that formed critical components of globally transformative pioneering forest ecosystems in the Mid- and early Late Devonian (ca. 393-372 Ma). Well-known cladoxylopsid fossils include the up to ∼1-m-diameter sandstone casts known as Eospermatopteris from Middle Devonian strata of New York State. Cladoxylopsid trunk structure comprised a more-or-less distinct cylinder of numerous separate cauline xylem strands connected internally with a network of medullary xylem strands and, near the base, externally with downward-growing roots, all embedded within parenchyma. However, the means by which this complex vascular system was able to grow to a large diameter is unknown. We demonstrate-based on exceptional, up to ∼70-cm-diameter silicified fossil trunks with extensive preservation of cellular anatomy from the early Late Devonian (Frasnian, ca. 374 Ma) of Xinjiang, China-that trunk expansion is associated with a cylindrical zone of diffuse secondary growth within ground and cortical parenchyma and with production of a large amount of wood containing both rays and growth increments concentrically around individual xylem strands by normal cambia. The xylem system accommodates expansion by tearing of individual strand interconnections during secondary development. This mode of growth seems indeterminate, capable of producing trees of large size and, despite some unique features, invites comparison with secondary development in some living monocots. Understanding the structure and growth of cladoxylopsids informs analysis of canopy competition within early forests with the potential to drive global processes.

[Acute effect of ambient air pollution on small airway lung functions among school children in Shanghai]

Objective: To study the acute effects of compound ambient air pollution on small airway lung functions among school children in Shanghai. Method: A longitudinal survey on lung functions was conducted among 233 school-children from three schools (A, B and C, located in innerring, mid-ring and outer-ring areas). Lung function test was performed once a week for 3 times respectively, among children in school A and B in Dec. 2013 and in school C in Dec. 2014. The fourth lung function test was tested in Jun. 2014 and May 2015 in the respective schools. Results: from the lung function would include items as: forced mid-expiratory flow at 25% of forced vital capacity (MEF(25%)), mid-expiratory flow at 50% of forced vital capacity (MEF(50%)), mid-expiratory flow at 75% of forced vital capacity (MEF(75%)) and mid-expiratory flow between 25% and 75% of the forced vital capacity (FEF(25%-75%)). Data regarding the daily air quality real-time of PM(2.5), PM(10), SO(2) and NO(2) in Dec. 2013, Dec. 2014, Jun. 2014 and May. 2015 from the three environmental monitoring spots and meteorological data from the Shanghai Meteorological Service system which were physically close to the three schools, were collected simultaneously. Linear mixed effect model was used to examine the levels of correlation between lung function indicators and ambient air pollutants. Results When confounding factors on meteorology and individuals were controlled, the lag effects and accumulated lag effects were found to have existed between the internal quarter rang (IQR) concentration of PM(2.5) and PM(10) in lag2 day and lag02 days, IQR concentration of SO(2) in lag02 day and IQR concentration of NO(2) lag0 day, when small airway lung functions like MEF(25%), MEF(50%), MEF(75%) and FEF(25%-75%)(P<0.05) were inspected. Results from the two air pollutants model analysis showed that SO(2) and NO(2) presenting interactive effects with PM(2.5), PM(10) and lag effects more significant than the individual SO(2) and NO(2), respectively (P<0.05). Conclusion: Contents on the ambient air pollutants as PM(2.5), PM(10), SO(2) and NO(2) were negatively associated with the lung functions in the small airways of children, in Shanghai.

Influence of Regional Difference in Bone Mineral Density on Hip Fracture Site in Elderly Females by Finite Element Analysis

Hip fracture is a kind of osteoporotic fractures in elderly patients. Its important monitoring indicator is to measure bone mineral density (BMD) using DXA. The stress characteristics and material distribution in different parts of the bones can be well simulated by three-dimensional finite element analysis. Our previous studies have demonstrated a linear positive correlation between clinical BMD and the density of three-dimensional finite element model of the femur. However, the correlation between the density variation between intertrochanteric region and collum femoris region of the model and the fracture site has not been studied yet. The present study intends to investigate whether the regional difference in the density of three-dimensional finite element model of the femur can be used to predict hip fracture site in elderly females. The CT data of both hip joints were collected from 16 cases of elderly female patients with hip fractures. Mimics 15.01 software was used to reconstruct the model of proximal femur on the healthy side. Ten kinds of material properties were assigned. In Abaqus 6.12 software, the collum femoris region and intertrochanteric region were, respectively, drawn for calculating the corresponding regional density of the model, followed by prediction of hip fracture site and final comparison with factual fracture site. The intertrochanteric region/collum femoris region density was [(1.20 ± 0.02) × 10(6)] on the fracture site and [(1.22 ± 0.03) × 10(6)] on the non-fracture site, and the difference was statistically significant (P = 0.03). Among 16 established models of proximal femur on the healthy side, 14 models were consistent with the actual fracture sites, one model was inconsistent, and one model was unpredictable, with the coincidence rate of 87.5 %. The intertrochanteric region or collum femoris region with lower BMD is more prone to hip fracture of the type on the corresponding site.

Leaf evolution in early-diverging ferns: insights from a new fern-like plant from the Late Devonian of China

BACKGROUND AND AIMS

With the exception of angiosperms, the main euphyllophyte lineages (i.e. ferns sensu lato, progymnosperms and gymnosperms) had evolved laminate leaves by the Late Devonian. The evolution of laminate leaves, however, remains unclear for early-diverging ferns, largely represented by fern-like plants. This study presents a novel fern-like taxon with pinnules, which provides new insights into the early evolution of laminate leaves in early-diverging ferns.

METHODS

Macrofossil specimens were collected from the Upper Devonian (Famennian) Wutong Formation of Anhui and Jiangsu Provinces, South China. A standard degagement technique was employed to uncover compressed plant portions within the rock matrix.

KEY RESULTS

A new fern-like taxon, SHOUGANGIA BELLA GEN ET SP NOV: , is described and represents an early-diverging fern with highly derived features. It has a partially creeping stem with adventitious roots only on one side, upright primary and secondary branches arranged in helices, tertiary branches borne alternately or (sub)oppositely, laminate and usually lobed leaves with divergent veins, and complex fertile organs terminating tertiary branches and possessing multiple divisions and numerous terminal sporangia.

CONCLUSIONS

Shougangia bella provides unequivocal fossil evidence for laminate leaves in early-diverging ferns. It suggests that fern-like plants, along with other euphyllophyte lineages, had independently evolved megaphylls by the Late Devonian, possibly in response to a significant decline in atmospheric CO2 concentration. Among fern-like plants, planate ultimate appendages are homologous with laminate pinnules, and in the evolution of megaphylls, fertile organs tend to become complex.

Decreased expression of ING2 gene and its clinicopathological significance in Chinese NSCLC patients

The inhibitor of growth 2 (ING2) is a member of lNG family, involved in cell cycle regulation, DNA repair, apoptosis and senescence, and participating in chromatin remodeling and transcriptional regulation by histone modification. Recent researches suggest ING2 plays roles in carcinogenesis both as tumor suppressor gene and ongocene depending on tumor types and cell status. Here, we investigated the status of ING2 in a series of 64 Chinese non-small cell lung cancer (NSCLC)patients using immunohistochemistry (IHC) and confirmed the results with Western blotting. RT-PCR results revealed the expression level of ING2 was consistent with mRNA level. The IHC results showed that ING2 protein expression was significantly decreased in NSCLC samples compared with normal lung tissues (P<O.OS). ING2 expression was lost in 32.8%(21/64) NSCLC tissues, which was more frequently in adenocarcinoma (ADK) than in squamous cell carcinoma (SCC), 45.8%(11124) and 26.3% (10/38), respectively. We also found ING2 translocation from the nucleus to the cytoplasm, which may bea critical event for carcinogenesis. And the status of ING2 in SCC was significantly associated with lymph node metastasis status and TNM stage. After sequencing ING2 gene, we found no heterozygosity or mutation. Taken together, these results indicated that the aberrantly expression of ING2 may contribute to NSCLC tumorigenesis.

Osteogenesis induced in goat bone marrow progenitor cells by recombinant adenovirus coexpressing bone morphogenetic protein 2 and basic fibroblast growth factor

Bone morphogenetic protein 2 (BMP2) and basic fibroblast growth factor (bFGF) have been shown to exhibit a synergistic effect to promote bone repair and healing. In this study, we constructed a novel adenovirus with high coexpression of BMP2 and bFGF and evaluated its effect on osteogenic differentiation of goat bone marrow progenitor cells (BMPCs). Recombinant adenovirus Ad-BMP2-bFGF was constructed by using the T2A sequence. BMPCs were isolated from goats by density gradient centrifugation and adherent cell culture, and were then infected with Ad-BMP2-bFGF or Ad-BMP2. Expression of BMP2 and bFGF was detected by ELISA, and alkaline phosphatase (ALP) activity was detected by an ALP assay kit. In addition, von Kossa staining and immunocytochemical staining of collagen II were performed on BMPCs 21 days after infection. There was a high coexpression of BMP2 and bFGF in BMPCs infected with Ad-BMP2-bFGF. Twenty-one days after infection, ALP activity was significantly higher in BMPCs infected with Ad-BMP2-bFGF than in those infected with Ad-BMP2. Larger and more mineralized calcium nodules, as well as stronger collagen II staining, were observed in BMPCs infected with Ad-BMP2-bFGF than in those infected with Ad-BMP2. In summary, we developed a novel adenovirus vector Ad-BMP2-bFGF for simultaneous high coexpression of BMP2 and bFGF, which could induce BMPCs to differentiate efficiently into osteoblasts.

RAPD fingerprint construction and genetic similarity of Mesona chinensis (Lamiaceae) in China

Mesona chinensis is an economically important agricultural crop, primarily cultivated for making grass jelly. It was originally discovered in South China. We examined 18 cultivars, including cultivars from Guangdong, Fujian, and Guangxi, China, Taiwan, and Indonesia, and a hybrid (a cross between cultivars from Indonesia and Guangdong), based on RAPD markers. The genetic similarity coefficient was calculated by NTSYS 2.10 and the clustering analysis was made by UPGMA. PCR amplification with 10 primers produced 163 bands; 94% of the amplified loci were polymorphic. The primers S208, S206, and S253 could completely distinguish all 19 samples by constructing a DNA fingerprint. Cluster analysis divided the 19 cultivars into five groups, with an overall genetic similarity coefficient of 0.68. Correlations were found among regional distributions, parental sources, and RAPD markers, demonstrating the rich genetic diversity of these 19 cultivars of M. chinensis. This study provides useful information for the classification, identification, and breeding of M. chinensis.

Growth and characterization of self-Q-switched Nd:Cr:YVO4 crystal

A Nd:Cr:YVO4 crystal was grown by the Czochralski method for the first time to our knowledge. Its structure and cell parameter have been studied by X-ray powder diffraction (XRPD) analysis. Polarized absorption spectra were measured at room temperature, which showed that the absorption bands display polarization character and an absorption band of Cr5+ ions at 1110 nm enables the crystal to be a self-Q-switched laser material. We also found that the absorption of Cr5+ ions became much larger and its self-Q-switched laser performance became much better when the Nd:Cr:YVO4 crystal was annealed because the annealing induces more Cr ions to become those with + 5 valence. In the self-Q-switched laser, the maximum output power, shortest pulse width, and largest pulse energy were obtained to be 120 mW, 85.8 ns, and 0.79 μJ, respectively.

Insecticidal and cytotoxic activities of extracts of Cacalia tangutica and its two active ingredients against Musca domestica and Aedes albopictus

The insecticidal activities of extracts from different parts of Cacalia tangutica (Franch.) H.-M. and two active ingredients, friedelin and stigmasterol, against Musca domestica L., Aedes albopictus (Skuse), and Spodoptera litura (F.) cells (SL cells) are reported. Extracts from leaves, flowers, and roots are highly active against adult M. domestica and the fourth-instar larvae of Ae. albopictus. The foliar extract was the most active with LC50 values of 1.74 mg/g and 196.94 microg/ml against adult M. domestica and fourth-instar larvae of Ae. albopictus, respectively. Extracts from stems were the least active. Friedelin and rotenone were highly active and equitoxic to these two insect species. The LC50 value of friedelin in adult M. domestica 48 h after treatment was 129.27 microg/g. The activity of stigmasterol on these two insect species was not obvious. However, the cytotoxicity of stigmasterol to S. litura cells was significantly greater than that of either friedelin or rotenone. At 25 microg/ml, the mortality of cells 24 h after treatment with stigmasterol was 23.0%. In contrast, friedelin and rotenone at the same concentration produced 16 and 18% mortality, respectively. Our results indicate differences between cytotoxicity in vitro and insect toxicity in vivo.

Analysis of the HFE gene (C282Y, H63D and S65C) mutations in a general Chinese Han population

Hereditary hemochromatosis (HH) is one of the most common autosomal recessive genetic disorders of iron metabolism in white populations, which leads to inappropriately high iron absorption. C282Y, H63D, and S65C are three major missense mutations of the hemochromatosis gene (HFE). In the present study, C282Y, H63D, and S65C mutations in 395 normal Chinese Han populations from Zhejiang province were investigated. No C282Y, S65C mutations, and H63D homozygote was observed, while the genotype frequency of H63D heterozygote was 4.6% and the allelic frequency 2.3% in this population. This was the first report to analyze the prevalence of C282Y, H63D, and S65C mutations in the HFE gene in a Chinese Han population. Low incidence of the HFE gene mutations could be a reason for the rarity of HH in the Chinese Han population studied.

14 bp deletion polymorphism in the HLA-G gene is a risk factor for idiopathic dilated cardiomyopathy in a Chinese Han population

Human leukocyte antigen (HLA) has been reported to be associated with the pathogenesis of autoimmune-associated idiopathic dilated cardiomyopathy (IDC). However, the HLA-G in this context is limited. In the current study, a total of 117 IDC patients and age and sex matched 401 unrelated healthy controls in a Chinese Han population were HLA-G genotyped for the 14 bp insertion and deletion polymorphism. IDC patients showed markedly increased frequencies of -14 bp/-14 bp genotype [Pc = 0.00049, odds ratio (OR) = 2.17] and -14 bp alleles (Pc = 4.1 x 10(-5), OR = 1.97) when compared with healthy controls. Whereas the frequencies of +14 bp/+14 bp genotype (Pc = 0.0036, OR = 0.35) and +14 bp alleles (Pc = 4.1 x 10(-5), OR = 0.51) were significantly lower in IDC. These data, for the first time, indicated that 14 bp insertion/deletion polymorphism in HLA-G gene could be a genetic risk factor for the susceptibility to IDC.

Increased glycophorin A somatic cell variant frequency in arsenic-exposed patients of Guizhou, China

Exposure to arsenic through domestic burning arsenic-containing coal causes various tumors in a population of Guizhou, China. The glycophorin A (GPA) assay is a human mutation assay detecting somatic variation in erythrocytes expressing the MN blood type, and was used to assess genotoxicity of arsenic-exposed patients. Peripheral blood was collected from 18 adult healthy subjects and 40 arsenic-exposed patients in heparin-treated tubes. Erythrocytes were isolated, fixed in formalin and immuno-labeled with fluorescent antibodies against GPA, followed by flow cytometry analysis. Arsenic exposure increased the variant frequency (expressed as the number of variant red cells per 10(6) erythrocytes): NN, 3.7 in healthy subjects versus 21.2 in arsenic-exposed patients; N phi, 12.6 versus 33.1; MM, 13.1 versus 110; and M phi, 5.2 versus 20.3. The total GPA variant frequency was increased about five-fold (34.7 in healthy subjects versus 185 in arsenosis patients). Furthermore, the variant frequency was significantly higher in skin tumor-bearing patients: NN, 19.4 in arsenic-exposed non-tumor patients versus 31.5 in tumor-bearing patients; N phi, 29.5 versus 54.5; MM, 102 versus 159; M phi, 15.9 versus 45.1. Total GPA variant frequency in arsenic-exposed patients bearing skin tumors was significantly increased compared to patients without skin tumors (167 versus 290). The relationship between arsenic exposure history and GPA variant frequency was less evident. These data demonstrate that arsenic exposure is associated with mutations at the GPA locus, an effect exaggerated in patients bearing arsenic-induced skin tumors. The variant frequency of GPA could be a useful biomarker for arsenic exposure and arsenic carcinogenesis.

Refined localization of dyschromatosis symmetrica hereditaria gene to a 9.4-cM region at 1q21-22 and a literature review of 136 cases reported in China

BACKGROUND

Dyschromatosis symmetrica hereditaria (DSH) is an autosomal dominant pigmentary genodermatosis characterized by hyperpigmented and hypopigmented macules on the extremities, which has recently been mapped to an 11.6-cM interval on chromosome 1q11-21. So far, most cases of DSH have been reported in Japan and dermatologists around the world might think this disorder mainly occurs in Japan. In fact, there are 17 DSH families including 136 cases reported in China since 1980, but most of them are described in Chinese.

OBJECTIVES

To refine the previously mapped region that facilitates the identification of the DSH gene and to delineate the clinical and genetic features of Chinese DSH cases by a literature review of 136 cases reported in China.

METHODS

We performed genotyping and linkage analysis using polymorphic microsatellite markers at 1q11-22 in two Chinese DSH families, and reviewed all of the DSH cases reported in China since 1980.

RESULTS

A cumulative maximum two-point lod score of 3.68 was produced with marker D1S506 at a recombination frequency of theta = 0.00 in these two families. Haplotype analysis refined the DSH locus to a 9.4-cM interval flanked by D1S2343 and D1S2635. The genetic and clinical features of Chinese cases with DSH were summarized. In some Chinese cases, hyperpigmented and hypopigmented macules were scattered on the neck and chest, but among Japanese patients there were no similar skin lesions to be reported on these sites.

CONCLUSIONS

This study confirms linkage of DSH to a previously mapped region and refines the DSH gene to a 9.4-cM interval at 1q21-22. Likewise, the literature review indicates that DSH is not an uncommon disorder in China and the differences in the distribution of skin lesions could be related to race and environment.

Strong and macroporous calcium phosphate cement: Effects of porosity and fiber reinforcement on mechanical properties

Because of its excellent osteoconductivity and bone-replacement capability, self-setting calcium phosphate cement (CPC) has been used in a number of clinical procedures. For more rapid resorption and concomitant osseointegration, methods were desired to build macropores into CPC; however, this decreased its mechanical properties. The aims of this study, therefore, were to use fibers to strengthen macroporous CPC and to investigate the effects of the pore volume fraction on its mechanical properties. Water-soluble mannitol crystals were incorporated into CPC paste; the set CPC was then immersed in water to dissolve mannitol, producing macropores. Mannitol/(mannitol + CPC powder) mass fractions of 0, 10, 20, 30, and 40% were used. An aramid fiber volume fraction of 6% was incorporated into the CPC-mannitol specimens, which were set in 3 mm x 4 mm x 25 mm molds and then fractured in three-point flexure to measure the strength, work of fracture, and modulus. The dissolution of mannitol created well-formed macropores, with CPC at 40% mannitol having a total porosity of a 70.8% volume fraction. Increasing the mannitol content significantly decreased the properties of CPC without fibers (analysis of variance; p < 0.001). The strength (mean +/- standard deviation; n = 6) of CPC at 0% mannitol was 15.0 +/- 1.8 MPa; at 40% mannitol, it decreased to 1.4 +/- 0.4 MPa. Fiber reinforcement improved the properties, with the strength increasing threefold at 0% mannitol, sevenfold at 30% mannitol, and nearly fourfold at 40% mannitol. The work of fracture increased by 2 orders of magnitude, but the modulus was not changed as a result of fiber reinforcement. A scanning electron microscopy examination of specimens indicated crack deflection and bridging by fibers, matrix multiple cracking, and frictional pullout of fibers as the reinforcement mechanisms. Macroporous CPCs were substantially strengthened and toughened via fiber reinforcement. This may help extend the use of CPCs with macropores for bony ingrowth to the repair of larger defects in stress-bearing locations.

Whisker-reinforced bioactive composites containing calcium phosphate cement fillers: effects of filler ratio and surface treatments on mechanical properties

Calcium phosphate cement (CPC) sets to form microporous solid hydroxyapatite with excellent osteoconductivity, but its brittleness and low strength prohibit use in stress-bearing locations. The aim of this study was to incorporate prehardened CPC particles and ceramic whiskers in a resin matrix to improve the strength and fracture resistance, and to investigate the effects of key microstructural variables on composite mechanical properties. Two types of whiskers were used: silicon nitride, and silicon carbide. The whiskers were surface-treated by fusing with silica and by silanization. The CPC particle fillers were either silanized or not silanized. Seven mass ratios of whisker-silica/CPC were mixed: 0:1 (no whisker-silica), 1:5, 1:2, 1:1, 2:1, 5:1, and 1:0 (no CPC). Each powder was blended with a bisphenol-a-glycidyl methacrylate-based resin to harden in 2 x 2 x 25 mm molds by two-part chemical curing. The specimens were tested in three-point flexure to measure strength, work-of-fracture (toughness), and elastic modulus. Two-way analysis of variance was used to analyze the data, and scanning electron microscopy was used to examine specimen fracture surfaces. The whisker-silica/CPC ratio had significant effects on composite properties (p < 0.001). When this ratio was increased from 0:1 to 1:0, the strength was increased by about three times, work-of-fracture by five times, and modulus by two times. Whisker surface treatments and CPC filler silanization also had significant effects (p < 0.001) on composite properties. Scanning electron microscopy revealed rough fracture surfaces for the whisker composites with steps and whisker pullout. Resin remnants were observed on the surfaces of the pulled-out whiskers, indicating strong whisker-matrix bonding. In conclusion, incorporating highly osteoconductive CPC fillers and ceramic whiskers yielded composites with substantially improved mechanical properties compared with composites filled with CPC particles without whiskers. The composite properties were determined by whisker-to-CPC ratio and filler surface treatments.

Effect of silicon carbide whisker-silica heat treatment on the reinforcement of dental resin composites

The strength and fracture resistance of dental resin composites need to be improved to extend their use to large stress-bearing crown and multiple-unit applications. Recent studies showed that the addition of ceramic whiskers significantly reinforced resin composites. The aim of the present study was to use a silicon carbide whisker-silica particle mixture to reinforce resin composites, and to investigate the effect of whisker-silica mixture heat-treatment on composite properties. The whiskers were blended with silica particles and were thermally fused in an attempt to roughen the whiskers for improved retention in the matrix. The mixtures were heat-treated at temperatures of 500, 650, 800, 950, and 1100 degrees C for 10 min, 30 min, and 3 h. The mixtures were then silanized, incorporated into a dental resin, and the paste was placed into 2 x 2 x 25 mm molds and heat-cured at 140 degrees C for 30 min. A 3-point flexural test was used to measure flexural strength and work-of-fracture. Two commercial indirect composites were tested as controls. Two-way ANOVA showed that there was no significant effect from temperature or time. Therefore, all the whisker-silica mixture samples were combined into one group (n = 96), and compared to composites filled with silica only or whisker only, and the two indirect control composites. The whisker-silica mixture group had a flexural strength (mean +/- SD) of (186 +/- 24) MPa, significantly higher than (99 +/- 29) MPa for silica only, (131 +/- 22) MPa for whisker only, and (109 +/- 23) MPa and (114 +/- 18) MPa for the two indirect composites (Tukey's multiple comparison test; family confidence coefficient = 0.95). Similar results were obtained on work-of-fracture. Scanning electron microscopy revealed rough fracture surfaces for the whisker-silica composites, indicating crack deflection and bridging by whiskers as toughening mechanisms. Whisker-silica mixture minimized whisker entanglement and enhanced whisker-resin bonding, resulting in substantially stronger and tougher dental resin composites.

Effects of fiber length and volume fraction on the reinforcement of calcium phosphate cement

A self-setting calcium phosphate cement (CPC) transforms into solid hydroxyapatite during setting at body temperature, and has been used in a number of medical and dental procedures. However, the inferior mechanical properties of CPC prohibits its use in unsupported defects, stress-bearing locations or reconstruction of thin bones. The aim of the present study was to strengthen CPC with fiber reinforcement, to examine the effect of fiber length and volume fraction, and to investigate the reinforcement mechanisms. Previous studies employed either short fibers for random distributions, or continuous fibers that were as long as the specimen size with preferred orientations such as unidirectional alignment. In the present study, a novel methodology was developed in which fibers several times longer than the specimen mold size were randomly mixed with the CPC paste to approximate the isotropy associated with short fibers, and at the same time achieve the high reinforcement efficacy associated with continuous fibers. Carbon fibers of 8 microm diameter were used with fiber lengths ranging from 3 mm to 200 mm, and fiber volume fraction from 1.9% to 9.5%. A three-point flexural test was used to fracture the specimens. Scanning electron microscopy was used to examine crack-fiber interactions and specimen fracture surfaces. The composite containing fibers of 75 mm in length at a volume fraction of 5.7% achieved a flexural strength about 4 times, and work-of-fracture 100 times, greater than the unreinforced CPC. It is concluded that randomly mixing the CPC paste with carbon fibers that were several times longer than the specimen mold size resulted in substantial improvements in strength and fracture resistance; the reinforcement mechanisms were crack bridging and fiber pullout; and fiber length and volume fraction were key microstructural parameters that determined the cement properties.

Whisker-reinforced dental core buildup composites: effect of filler level on mechanical properties

The strength and toughness of dental core buildup composites in large stress-bearing restorations need to be improved to reduce the incidence of fracture due to stresses from chewing and clenching. The aims of the present study were to develop novel core buildup composites reinforced with ceramic whiskers, to examine the effect of filler level, and to investigate the reinforcement mechanisms. Silica particles were fused onto the whiskers to facilitate silanization and to roughen the whisker surface for improved retention in the matrix. Filler level was varied from 0 to 70%. Flexural strength, compressive strength, and fracture toughness of the composites were measured. A nano-indentation system was used to measure elastic modulus and hardness. Scanning electron microscopy (SEM) was used to examine the fracture surfaces of specimens. Whisker filler level had significant effects on composite properties. The flexural strength in MPa (mean +/- SD; n = 6) increased from (95+/-15) for the unfilled resin to (193+/- 8) for the composite with 50% filler level, then slightly decreased to (176+/-12) at 70% filler level. The compressive strength increased from (149+/-33) for the unfilled resin to (282+/-48) at 10% filler level, and remained equivalent from 10 to 70% filler level. Both the modulus and hardness increased monotonically with filler level. In conclusion, silica particle-fused ceramic single-crystalline whiskers significantly reinforced dental core buildup composites. The reinforcement mechanisms appeared to be crack deflection and bridging by the whiskers. Whisker filler level had significant effects on the flexural strength, compressive strength, elastic modulus, and hardness of composites.

Effects of whisker-to-silica ratio on the reinforcement of dental resin composites with silica-fused whiskers

Resin composites need to be strengthened to improve their performance in large stress-bearing restorations. This study aimed to reinforce composites with whiskers and to investigate the effects of the whisker:silica ratio. It was hypothesized that changing the whisker-silica ratio would affect the whisker-matrix bonding and the filler's distribution, and hence alter the composite properties. Silica particles and whiskers were mixed at various whisker:silica mass ratios, thermally fused, and combined with a dental resin at filler mass fractions of 0-65%. Whisker:silica ratio and filler level had significant effects on composite properties. At 60% filler level, the silica composite (whisker:silica = 0:1) had a flexural strength (mean +/- SD; n = 6) of 104 +/- 21 MPa; that at a whisker:silica ratio of 1:0 was 74 +/- 36 MPa. However, that of the silica-fused whisker composite (whisker:silica = 5:1) was 210 +/- 14 MPa, compared with 109 +/- 23 MPa and 114 +/- 18 MPa of two prosthetic controls. Mixing silica with whiskers minimized whisker entanglement, improved filler distribution in the matrix, and facilitated whisker silanization and bonding to the matrix, thus resulting in substantially stronger composites.

Reinforcement of a self-setting calcium phosphate cement with different fibers

A water-based calcium phosphate cement (CPC) has been used in a number of medical and dental procedures due to its excellent osteoconductivity and bone replacement capability. However, the low tensile strength of CPC prohibits its use in many unsupported defects and stress-bearing locations. Little investigation has been carried out on the fiber reinforcement of CPC. The aims of the present study, therefore, were to examine whether fibers would strengthen CPC, and to investigate the effects of fiber type, fiber length, and volume fraction. Four different fibers were used: aramid, carbon, E-glass, and polyglactin. Fiber length ranged from 3-200 mm, and fiber volume fraction ranged from 1.9-9.5%. The fibers were mixed with CPC paste and placed into molds of 3 x 4 x 25 mm. A flexural test was used to fracture the set specimens and to measure the ultimate strength, work-of-fracture, and elastic modulus. Scanning electron microscopy was used to examine specimen fracture surfaces. Fiber type had significant effects on composite properties. The composite ultimate strength in MPa (mean +/- SD; n = 6) was (62+/-16) for aramid, (59+/-11) for carbon, (29+/-8) for E-glass, and (24+/-4) for polyglactin, with 5.7% volume fraction and 75 mm fiber length. In comparison, the strength of unreinforced CPC was (13+/-3). Fiber length also played an important role. For composites containing 5.7% aramid fibers, the ultimate strength was (24+/-3) for 3 mm fibers, (36+/-13) for 8 mm fibers, (48 +/-14) for 25 mm fibers, and (62+/-16) for 75 mm fibers. At 25 mm fiber length, the ultimate strength of CPC composite was found to be linearly proportional to fiber strength. In conclusion, a self-setting calcium phosphate cement was substantially strengthened via fiber reinforcement. Fiber length, fiber volume fraction, and fiber strength were found to be key microstructural parameters that controlled the mechanical properties of CPC composites.

Dental resin composites containing ceramic whiskers and precured glass ionomer particles

OBJECTIVES

Glass ionomer, resin-modified glass ionomer, and compomer materials are susceptible to brittle fracture and are inadequate for use in large stress-bearing posterior restorations. The aim of this study was to use ceramic single crystal whiskers to reinforce composites formulated with precured glass ionomer, and to examine the effects of whisker-to-precured glass ionomer mass ratio on mechanical properties, fluoride release, and polishability of the composites.

METHODS

Silica particles were fused onto silicon nitride whiskers to facilitate silanization and to improve whisker retention in the matrix. Hardened glass ionomer was ground into a fine powder, mixed with whiskers, and used as fillers for a dental resin. Four control materials were also tested: a glass ionomer, a resin-modified glass ionomer, a compomer, and a hybrid composite. A three-point flexural test was used to measure flexural strength, modulus, and work-of-fracture. A fluoride ion-selective electrode was used to measure fluoride release. Composite surfaces polished simulating clinical procedures were examined by SEM and profilometry.

RESULTS

At whisker/(whisker + precured glass ionomer) mass fractions of 1.0 and 0.91, the whisker composite had a flexural strength in MPa (mean (SD); n = 6) of (196 (10)) and (150 (16)), respectively, compared to (15 (7)) for glass ionomer, (39 (8)) for resin-modified glass ionomer, (89 (18)) for compomer, and (120 (16)) for hybrid composite. The whisker composite had a cumulative fluoride release of nearly 20% of that of the glass ionomer after 90 days. The whisker composites had surface roughness comparable to the hybrid resin composite.

SIGNIFICANCE

Composites filled with precured glass ionomer particles and whiskers exhibit moderate fluoride release with improved mechanical properties; the whisker-to-glass ionomer ratio is a key microstructural parameter that controls fluoride release and mechanical properties.

Indentation modulus and hardness of whisker-reinforced heat-cured dental resin composites

OBJECTIVES

Recent studies showed that ceramic whisker reinforcement imparted a two-fold increase in the strength of dental composites. The aim of this study was to investigate the indentation response and measure the elastic modulus, hardness, and brittleness of whisker-reinforced heat-cured resin composites as a function of filler level, heat-cure temperature, and heat-cure duration.

METHODS

Silica particles were fused onto silicon nitride whiskers to facilitate silanization and to roughen the whiskers for improved retention in matrix. Whisker filler mass fractions of 0, 20, 40, 60, 70, 74 and 79% were tested. Heat-cure temperature ranged from 100 to 180 degrees C, and duration from 10 min to 24 h. A nano-indentation system enabled the measurement of elastic modulus. Fracture toughness was measured and composite brittleness index was calculated. An inlay/onlay composite and a prosthetic composite were tested as controls.

RESULTS

Whisker filler level and heat-cure duration had significant effects on composite properties, while heat-cure temperature had non-significant effects. The whisker composite with 79% filler level had a modulus in GPa (mean (SD); n = 6) of 26.9 (1.0), significantly higher than 15.1 (0.2) of an inlay/onlay control, and 16.1 (0.3) of a prosthetic control (Tukey's multiple comparison test; family confidence coefficient = 0.95). The fracture toughness in MPa.m1/2 was 2.22 (0.26) for the whisker composite, higher than 0.95 (0.11) for inlay/onlay control, and (1.13 +/- 0.19) for prosthetic control. The brittleness index was (0.49 +/- 0.07) for whisker composite, lower than (1.02 +/- 0.12) for inlay/onlay control and (0.63 +/- 0.13) for prosthetic control.

SIGNIFICANCE

Whisker filler level had a profound influence, heat-cure duration had significant effects, while temperature did not have significant effects, on the properties of whisker composite. The whisker composite had significantly higher elastic modulus and fracture toughness, and lower brittleness than the inlay/onlay and prosthetic controls.

Whisker-reinforced heat-cured dental resin composites: effects of filler level and heat-cure temperature and time

Currently available dental resin composites are inadequate for use in large stress-bearing crown and multiple-unit restorations. The aim of this study was to reinforce heat-cured composites with ceramic whiskers. It was hypothesized that whiskers substantially strengthen heat-cured composites. It was further hypothesized that whisker filler level and heat-cure temperature and time significantly influence composite properties. Silica particles were fused onto the whiskers to facilitate silanization and to roughen the whiskers for improved retention in the matrix. The whisker filler mass fraction was varied from 0% to 79%, the heat-cure temperature from 80 degrees C to 180 degrees C, and cure time from 10 min to 24 hrs. Flexural strength, work-of-fracture, and fracture toughness of the composites were measured, and specimen fracture surfaces were examined with scanning electron microscopy. Filler level had a significant effect on composite properties. The whisker composite with 70% filler level had a flexural strength in MPa (mean +/- SD; n = 6) of 248 +/- 23, significantly higher than 120 +/- 16 of an inlay/onlay composite control and 123 +/- 21 of a prosthetic composite control (Tukey's multiple comparison test; family confidence coefficient = 0.95). Heat-cure time also played a significant role. At 120 degrees C, the strength of composite cured for 10 min was 178 +/- 17, lower than 236 +/- 14 of composite cured for 3 hrs. The strength of whisker composite did not degrade after water-aging for 100 d. In conclusion, heat-cured composites were substantially reinforced with whiskers. The reinforcement mechanisms appeared to be whiskers bridging and resisting cracks. The strength and fracture toughness of whisker composite were nearly twice those of currently available inlay/onlay and prosthetic composites.

Single-crystalline ceramic whisker-reinforced carboxylic acid-resin composites with fluoride release

Currently available glass-ionomer, resin-modified glass-ionomer, and compomer materials have relatively low strength and toughness and, therefore, are inadequate for use in large stress-bearing posterior restorations. In the present study, ceramic single-crystalline whiskers were mixed with fluorosilicate glass particles and used as fillers to reinforce experimental carboxylic acid-resin composites. The carboxylic acid was a monofunctional methacryloxyethyl phthalate (MEP). Five mass fractions of whisker/(whisker + fluorosilicate glass), and corresponding resin (resin + MEP), were evaluated. Four control materials were also tested for comparison: a glass ionomer, a resin-modified glass ionomer, a compomer, and a hybrid composite resin. Flexural specimens were fabricated to measure the flexural strength, elastic modulus, and work-of-fracture (an indication of toughness). Fluoride release was measured by using a fluoride ion selective electrode. The properties of whisker composites depended on the whisker/(whisker + fluorosilicate glass) mass fraction. At a mass fraction of 0.8, the whisker composite had a flexural strength in MPa (mean +/- sd; n = 6) of 150 +/- 16, significantly higher than that of a glass ionomer (15 +/- 7) or a compomer control (89 +/- 18) (Tukey's multiple comparison test; family confidence coefficient = 0.95). Depending on the ratio of whisker:fluorosilicate glass, the whisker composites had a cumulative fluoride release up to 60% of that of a traditional glass ionomer. To conclude, combining ceramic whiskers and fluorosilicate glass in a carboxylic acid-resin matrix can result in fluoride-releasing composites with significantly improved mechanical properties.

Strengthening composite resin restorations with ceramic whisker reinforcement

Due to their tendency to fracture, current composite formulations are unsuitable for use in large stress-bearing direct posterior restorations that involve cusps. This study investigated the use of single-crystalline ceramic whiskers for the reinforcement of composite resins. The whisker-reinforced composite materials exhibited physical characteristics (i.e., flexural strength, work-of-fracture, and elastic modulus) that were significantly greater (P < 0.05; Student's t test) than those of traditional composite formulations. The experimental materials also had a surface smoothness that was essentially comparable to hybrid composite control specimens.

Three-body wear of a hand-consolidated silver alternative to amalgam

Recent studies have investigated a mercury-free silver alternative to amalgam, but the silver powders required a relatively high compaction pressure to consolidate. The aim of the present study was to consolidate a precipitated silver powder into a cohesive solid using an air-driven pneumatic condenser fitted with an amalgam plugger at a clinically realistic load, and to study the mechanisms and rates of three-body wear of the consolidated silver in comparison with that of an amalgam. The silver powder was annealed, rinsed with a dilute acid, and consolidated either in a prepared tooth cavity or in a specimen mold at a load of 15 N. A four-station wear machine was used where each specimen was immersed in a slurry containing polymethyl methacrylate beads, then a steel pin was loaded and rotated against the specimen at a maximum load of 76 N. The flexural strength in MPa (mean +/- SD; n = 10) was 86 +/- 20 for amalgam, 181 +/- 45 for silver with a polished surface, and 202 +/- 21 for silver with a burnished surface. After 4 x 10(5) wear cycles, the wear scar depth in microm was 134 +/- 54 for amalgam, 143 +/- 8 for polished silver, and 131 +/- 9 for burnished silver, which were not significantly different (Tukey's multiple comparison test; family confidence coefficient = 0.95). SEM examination revealed cracks and fracture pits in the worn surface of amalgam, in contrast to a smooth surface in silver. Wear and material removal in amalgam occurred by microfracture and dislodgement of cracked segments, while wear in the silver occurred by ductile deformation and flow of materials. To conclude, the consolidated silver possesses a three-body wear resistance similar to that of amalgam, and a higher resistance to wear-induced damage and cracking than amalgam. The mechanism of wear in amalgam is microfracture and material dislodgement, while that in consolidated silver is ductile deformation and flow of material.

Dental composite resins containing silica-fused ceramic single-crystalline whiskers with various filler levels

Currently available direct-filling composite resins are susceptible to fracture and hence are not recommended for use in large stress-bearing posterior restorations involving cusps. The glass fillers in composites provide only limited reinforcement because of the brittleness and low strength of glass. The aim of the present study was to use ceramic single-crystalline whiskers as fillers to reinforce composites, and to investigate the effect of whisker filler level on composite properties. Silica particles were fused onto the whiskers to facilitate silanization and to roughen the whiskers, thereby improving retention in the matrix. The composite flexural strength, elastic modulus, hardness, and degree of polymerization conversion were measured as a function of whisker filler mass fraction, which ranged from 0% to 70%. Selected composites were polished simulating clinical procedures, and the surface roughness was measured with profilometry. The whisker composite with a filler mass fraction of 55% had a flexural strength (mean +/- SD; n = 6) of 196+/-10 MPa, significantly higher than 83+/-14 MPa of a microfill and 120+/-16 MPa of a hybrid composite control (family confidence coefficient = 0.95; Tukey's multiple comparison). The composite modulus and hardness increased monotonically with filler level. The flexural strength first increased, then plateaued with increasing filler level. The degree of conversion decreased with increasing filler level. The whisker composite had a polished surface roughness similar to that of a conventional hybrid composite (p>0.1; Student's t). To conclude, ceramic whisker reinforcement can significantly improve the mechanical properties of composite resins; the whisker filler level plays a key role in determining composite properties; and the reinforcement mechanisms appear to be crack pinning by whiskers and friction from whisker pullout resisting crack propagation.

Two-body sliding wear of a direct-filling silver alternative to amalgam

OBJECTIVE

This study investigated the wear resistance of a mercury-free silver direct-filling material and a dental amalgam.

METHOD AND MATERIALS

A precipitated silver powder was rinsed with dilute fluoboric acid and consolidated into a cohesive solid. For tooth cavity restoration and flexural testing, the silver was consolidated with a dental amalgam plugger at a load of 15 N. For wear testing, because of the relatively large specimen size, the silver was pressed at a pressure of 150 MPa, yielding a density similar to that obtained by hand consolidation.

RESULTS

The silver had a flexural strength twice that of amalgam. Pin-on-disk wear resulted in a smooth surface and hardening in silver, as measured by indentation inside the wear tracks, in contrast to the damage that was found in amalgam. The wear track cross-sectional area (n = 12) at 10(6) revolutions was not statistically significantly different among amalgam, polished silver, and burnished silver.

CONCLUSION

The consolidated silver exhibited work hardening and surface densification during wear and, as a result, was more resistant to wear-induced damage than amalgam.

Ceramic whisker reinforcement of dental resin composites

Resin composites currently available are not suitable for use as large stress-bearing posterior restorations involving cusps due to their tendencies toward excessive fracture and wear. The glass fillers in composites provide only limited reinforcement because of the brittleness and low strength of glass. The aim of the present study was to reinforce dental resins with ceramic single-crystalline whiskers of elongated shapes that possess extremely high strength. A novel method was developed that consisted of fusing silicate glass particles onto the surfaces of individual whiskers for a two-fold benefit: (1) to facilitate silanization regardless of whisker composition; and (2) to enhance whisker retention in the matrix by providing rougher whisker surfaces. Silicon nitride whiskers, with an average diameter of 0.4 microm and length of 5 microm, were coated by the fusion of silica particles 0.04 microm in size to the whisker surface at temperatures ranging from 650 degrees C to 1000 degrees C. The coated whiskers were silanized and manually blended with resins by spatulation. Flexural, fracture toughness, and indentation tests were carried out for evaluation of the properties of the whisker-reinforced composites in comparison with conventional composites. A two-fold increase in strength and toughness was achieved in the whisker-reinforced composite, together with a substantially enhanced resistance to contact damage and microcracking. The highest flexural strength (195+/-8 MPa) and fracture toughness (2.1+/-0.3 MPa x m(1/2)) occurred in a composite reinforced with a whisker-silica mixture at whisker:silica mass ratio of 2:1 fused at 800 degrees C. To conclude, the strength, toughness, and contact damage resistance of dental resin composites can be substantially improved by reinforcement with fillers of ceramic whiskers fused with silica glass particles.

Indentation creep behavior of a direct-filling silver alternative to amalgam

Amalgam creep has been identified as a key parameter associated with marginal breakdown and corrosion. The aim of this study was to evaluate the time-dependent deformation (creep) of a novel silver filling material as an alternative to amalgam. We made the silver specimens by pressing a precipitated powder at room temperature to a density that can be achieved in clinical hand consolidation. The surface of the silver was either polished or burnished. To examine local contact creep and the effect of surface finishing, we used an indentation creep method in which a Vickers indenter was loaded on the specimen surface at a load of 10 N with dwell times of 5 sec to 6x10(4) sec. We used a bonded-interface technique to examine subsurface creep mechanisms. The flexural strength (mean+/-SD; n = 10) was 86+/-20 MPa for amalgam, 180+/-21 MPa for polished silver, and 209+/-19 MPa for burnished silver-values which are significantly different from each other (family confidence coefficient = 0.95; Tukey's multiple-comparison test). Indentation creep manifested as hardness number decreasing with increased dwell time. With dwell time increasing from 5 sec to 6x10(4) sec, the hardness number of amalgam was reduced by approximately 80%; that of the polished silver and the burnished silver was reduced by only 40%. Subsurface creep in amalgam consisted of the shape change of the alloy particles from spherical to elongated shapes, and the separation of matrix grains from each other, possibly due to grain-boundary sliding. Creep of the polished silver occurred by densification reducing porosity and increasing hardness; that of the burnished silver occurred by the displacement of the burnished layer. These results suggest that, due to creep-induced subsurface work-hardening and densification, the consolidated silver exhibits a higher resistance to indentation creep than does amalgam. The hardness number of silver approaches that of amalgam after prolonged indentation loading.

Indentation damage and mechanical properties of human enamel and dentin

Understanding the mechanical properties of human teeth is important to clinical tooth preparation and to the development of "tooth-like" restorative materials. Previous studies have focused on the macroscopic fracture behavior of enamel and dentin. In the present study, we performed indentation studies to understand the microfracture and deformation and the microcrack-microstructure interactions of teeth. It was hypothesized that crack propagation would be influenced by enamel rods and the dentino-enamel junction (DEJ), and the mechanical properties would be influenced by enamel rod orientation and tooth-to-tooth variation. Twenty-eight human third molars were used for the measurement of hardness, fracture toughness, elastic modulus, and energy absorbed during indentation. We examined the effect of enamel rod orientation by propagating cracks in the occlusal surface, and in the axial section in directions parallel and perpendicular to the occlusal surface. The results showed that the cracks in the enamel axial section were significantly longer in the direction perpendicular to the occlusal surface than parallel. The cracks propagating toward the DEJ were always arrested and unable to penetrate dentin. The fracture toughness of enamel was not single-valued but varied by a factor of three as a function of enamel rod orientation. The elastic modulus of enamel showed a significant difference between the occlusal surface and the axial section. It is concluded that the cracks strongly interact with the DEJ and the enamel rods, and that the mechanical properties of teeth are functions of microstructural orientations; hence, single values of properties (e.g., a single toughness value or a single modulus value) should not be used without information on microstructural orientation.

Cyclic contact fatigue of a silver alternative to amalgam

OBJECTIVE

To purpose of this study was to compare the cyclic contact fatigue resistance of a novel mercury-free silver direct filling material to that of a dental amalgam (Dispersalloy).

METHODS

The silver specimens were made by pressing a precipitated powder at room temperature with a pressure of 150 MPa, which can be achieved in clinical hand-consolidation. To simulate clinical contact of restorations against enamel cusps, a cyclic contact fatigue methodology was employed. A spherical indenter was used to repeatedly indent the specimen, while the accumulation of deformation and damage was examined as a function of the number of cycles up to 5 x 10(5). Student's t test, analysis of variance (ANOVA) and Duncan's multiple range test were used to compare the specimen groups for significant differences in flexural strength, indentation impression diameter, and hardness. A type I error of alpha = 0.05 was considered as significant. Subsurface damage was examined by using a bonded-interface technique.

RESULTS

As a result of cyclic indentation, microcracks were produced in the amalgam, but no cracks were found in the silver filling material. At fewer numbers of cycles, indentation produced larger impressions in silver (e.g., diameter = [450 +/- 31] microns at 10(2) cycles) than in amalgam ([145 +/- 20] microns) due to a lower hardness of the former. However, with increasing number of cycles, damage accumulated more rapidly in the amalgam, while the silver beneficially work-hardened in repeated indentations. At 5 x 10(5) cycles, the difference in impression diameter between silver and amalgam ([582 +/- 20] microns vs. [568 +/- 42] microns) become insignificant (p > 0.1, Student's t test).

SIGNIFICANCE

The mercury-free silver direct filling material is more resistant to microcracking and to cyclic contact fatigue than amalgam, and the indentation impression sizes in the consolidated silver and dental amalgam are not statistically different at large numbers of cycles.

Enamel subsurface damage due to tooth preparation with diamonds

In clinical tooth preparation with diamond burs, sharp diamond particles indent and scratch the enamel, causing material removal. Such operations may produce subsurface damage in enamel. However, little information is available on the mechanisms and the extent of subsurface damage in enamel produced during clinical tooth preparation. The aim of this study, therefore, was to investigate the mechanisms of subsurface damage produced in enamel during tooth preparation by means of diamond burs, and to examine the dependence of such damage on enamel rod orientation, diamond particle size, and removal rate. Subsurface damage was evaluated by a bonded-interface technique. Tooth preparation was carried out on two enamel rod orientations, with four clinical diamond burs (coarse, medium, fine, and superfine) used in a dental handpiece. The results of this study showed that subsurface damage in enamel took the form of median-type cracks and distributed microcracks, extending preferentially along the boundaries between the enamel rods. Microcracks within individual enamel rods were also observed. The median-type cracks were significantly longer in the direction parallel to the enamel rods than perpendicular to the rods. Preparation with the coarse diamond bur produced cracks as deep as 84 +/- 30 microns in enamel. Finishing with fine diamond burs was effective in crack removal. The crack lengths in enamel were not significantly different when the removal rate was varied. Based on these results, it is concluded that subsurface damage in enamel induced by tooth preparation takes the form of median-type cracks as well as inter- and intra-rod microcracks, and that the lengths of these cracks are sensitive to diamond particle size and enamel rod orientation, but insensitive to removal rate.

Ribulose-1,5-bisphosphate carboxylase/oxygenase gene expression and diversity of Lake Erie planktonic microorganisms

Carbon dioxide fixation is carried out primarily through the Calvin-Benson-Bassham reductive pentose phosphate cycle, in which ribulose-1, 5-bisphosphate carboxylase/oxygenase (RubisCO) is the key enzyme. The primary structure of the large subunit of form I RubisCO is well conserved; however, four distinct types, A, B, C, and D, may be distinguished, with types A and B and types C and D more closely related to one another. To better understand the environmental regulation of RubisCO in Lake Erie phytoplanktonic microorganisms, we have isolated total RNA and DNA from four Lake Erie sampling sites. Probes prepared from RubisCO large-subunit genes (rbcL) of the freshwater cyanobacterium Synechococcus sp. strain PCC6301 (representative of type IB) and the diatom Cylindrotheca sp. strain N1 (representative of type ID) were hybridized to the isolated RNA and DNA. To quantitate rbcL gene expression for each sample, the amount of gene expression per gene dose (i.e., the amount of mRNA divided by the amount of target DNA) was determined. With a limited number of sampling sites, it appeared that type ID (diatom) rbcL gene expression per gene dose decreased as the sampling sites shifted toward open water. By contrast, a similar trend was not observed for cyanobacterial (type IB) rbcL gene expression per gene dose. Complementary DNA specific for rbcL was synthesized from Lake Erie RNA samples and used as a template for PCR amplification of portions of various rbcL genes. Thus far, a total of 21 clones of rbcL genes derived from mRNA have been obtained and completely sequenced from the Ballast Island site. For surface water samples, deduced amino acid sequences of five of six clones appeared to be representative of green algae. In contrast, six of nine sequenced rbcL clones from 10-m-deep samples were of chromophytic and rhodophytic lineages. At 5 m deep, the active CO2-fixing planktonic organisms represented a diverse group, including organisms related to Chlorella ellipsoidea, Cylindrotheca sp. strain N1, and Olisthodiscus luteus. Although many more samplings at diverse sites must be accomplished, the discovery of distinctly different sequences of rbcL mRNA at different water depths suggests that there is a stratification of active CO2-fixing organisms in western Lake Erie.

Surface characterization of fluorinated polymers (PTFE, PVDF, PFA) for use in ultratrace analysis

Surface characterization of new unused PTFE, PFA and PVDF labware has been carried out by light microscopy, scanning electron microscopy, profilometry and atomic force microscopy. It has been found that in spite of higher micro-roughness, PFA exhibits the lowest nano-roughness and hence seems best suited as vessel material for relatively mild pressureless chemical operations for sample preparation of ultrapure substances, as container material for storage of ultrapure liquids, and for transport of such liquids, e.g., from the producer in the chemical to the end user in the microelectronics industry. This suitability refers only to the surface quality of the investigated materials. PTFE-surfaces, due to the sintering process of production, exhibit the most unfavourable surface quality of the investigated fluorinated polymers.