The self-assembly, elasticity, and dynamics of cardiac thin filaments

Solutions of intact cardiac thin filaments were examined with transmission electron microscopy, dynamic light scattering (DLS), and particle-tracking microrheology. The filaments self-assembled in solution with a bell-shaped distribution of contour lengths that contained a population of filaments of much greater length than the in vivo sarcomere size ( approximately 1 mum) due to a one-dimensional annealing process. Dynamic semiflexible modes were found in DLS measurements at fast timescales (12.5 ns-0.0001 s). The bending modulus of the fibers is found to be in the range 4.5-16 x 10(-27) Jm and is weakly dependent on calcium concentration (with Ca2+ > or = without Ca2+). Good quantitative agreement was found for the values of the fiber diameter calculated from transmission electron microscopy and from the initial decay of DLS correlation functions: 9.9 nm and 9.7 nm with and without Ca2+, respectively. In contrast, at slower timescales and high polymer concentrations, microrheology indicates that the cardiac filaments act as short rods in solution according to the predictions of the Doi-Edwards chopsticks model (viscosity, eta approximately c(3), where c is the polymer concentration). This differs from the semiflexible behavior of long synthetic actin filaments at comparable polymer concentrations and timescales (elastic shear modulus, G' approximately c(1.4), tightly entangled) and is due to the relative ratio of the contour lengths ( approximately 30). The scaling dependence of the elastic shear modulus on the frequency (omega) for cardiac thin filaments is G' approximately omega(3/4 +/- 0.03), which is thought to arise from flexural modes of the filaments.

Myosin VI: a multifunctional motor

Myosin VI moves towards the minus end of actin filaments unlike all the other myosins so far studied, suggesting that it has unique properties and functions. Myosin VI is present in clathrin-coated pits and vesicles, in membrane ruffles and in the Golgi complex, indicating that it has a wide variety of functions in the cell. To investigate the cellular roles of myosin VI, we have identified a variety of myosin VI-binding partners and characterized their interactions. As an alternative approach, we have studied the in vitro properties of intact myosin VI. Previous studies assumed that myosin VI existed as a dimer but our biochemical characterization and electron microscopy studies reveal that myosin VI is a monomer. Using an optical tweezers force transducer, we showed that monomeric myosin VI is a non-processive motor with a large working stroke of 18 nm. Potential roles for myosin VI in cells are discussed.

A second generation apparatus for time-resolved electron cryo-microscopy using stepper motors and electrospray

We describe here a second generation apparatus for studying transient reaction conformations in macromolecules and their complexes by electron cryo-microscopy. Reactions are trapped by rapid freezing in times ranging from a few milliseconds to tens of seconds after initiation. Blotting of the electron microscope grid and freezing it in liquid ethane uses computer controlled microstepping motors. For the fastest time resolution, a blotted grid containing a thin film of one reactant is sprayed with small droplets containing a second reactant just before freezing. The spray is produced electrically (electrospray), which gives a dense cloud of droplets <1 microm in diameter from the 1-2 microl of solution required per grid. A second method in which two solutions are first mixed by turbulent flow and then blotted prior to freezing is used for reactions with time courses >1s.

Role of titin in vertebrate striated muscle

Titin is a giant muscle protein with a molecular weight in the megaDalton range and a contour length of more than 1 microm. Its size and location within the sarcomere structure determine its important role in the mechanism of muscle elasticity. According to the current consensus, elasticity stems directly from more than one type of spring-like behaviour of the I-band portion of the molecule. Starting from slack length, extension of the sarcomere first causes straightening of the molecule. Further extension then induces local unfolding of a unique sequence, the PEVK region, which is named due to the preponderance of these amino-acid residues. High speeds of extension and/or high forces are likely to lead to unfolding of the beta-sandwich domains from which the molecule is mainly constructed. A release of tension leads to refolding and recoiling of the polypeptide. Here, we review the literature and present new experimental material related to the role of titin in muscle elasticity. In particular, we analyse the possible influence of the arrangement and environment of titin within the sarcomere structure on its extensible behaviour. We suggest that, due to the limited conformational space, elongation and compression of the molecule within the sarcomere occur in a more ordered way or with higher viscosity and higher forces than are observed in solution studies of the isolated protein.

Stability and folding rates of domains spanning the large A-band super-repeat of titin

Titin is a very large (>3 MDa) protein found in striated muscle where it is believed to participate in myogenesis and passive tension. A prominent feature in the A-band portion of titin is the presence of an 11-domain super-repeat of immunoglobulin superfamily and fibronectin-type-III-like domains. Seven overlapping constructs from human cardiac titin, each consisting of two or three domains and together spanning the entire 11-domain super-repeat, have been expressed in Escherichia coli. Fluorescence unfolding experiments and circular dichroism spectroscopy have been used to measure folding stabilities for each of the constructs and to assign unfolding rates for each super-repeat domain. Immunoglobulin superfamily domains were found to fold correctly only in the presence of their C-terminal fibronectin type II domain, suggesting close and possibly rigid association between these units. The domain stabilities, which range from 8.6 to 42 kJ mol(-1) under physiological conditions, correlate with previously reported mechanical forces required to unfold titin domains. Individual domains vary greatly in their rates of unfolding, with a range of unfolding rate constants between 2.6 x 10(-6) and 1.2 s(-1). This variation in folding behavior is likely to be an important determinant in ensuring independent folding of domains in multi-domain proteins such as titin.

Flexibility and extensibility in the titin molecule: analysis of electron microscope data

Muscle elasticity derives directly from titin extensibility, which stems from three distinct types of spring-like behaviour of the I-band portion of the molecule. With progressively greater forces and sarcomere lengths, the molecule straightens and then unfolds, first in the PEVK-region and then in individual immunoglobulin domains. Here, we report quantitative analysis of flexibility and extensibility in isolated titin molecules visualized by electron microscopy. Conformations displayed by molecules dried on a substrate vary from a random coil to rod-like, demonstrating highly flexible and easily deformable tertiary structure. The particular conformation observed depends on the "wettability" of the substrate during specimen preparation: higher wettability favours coiled conformations, whereas lower wettability results in more extended molecules. Extension is shown to occur during liquid dewetting. Statistical methods of conformational analysis applied to a population of coiled molecules gave an average persistence length 13.5(+/-4.5) nm. The close correspondence of this value to an earlier one from light-scattering studies confirms that conformations observed by microscopy closely reflected the equilibrium conformation in solution. Analysis of hydrodynamic forces exerted during dewetting also indicates that the force causing straightening of the molecules and extension of the PEVK-region is in the picoNewton range, whereas unfolding of the immunoglobulin and fibronectin domains may require forces about tenfold higher. The microscope data directly illustrate the relationship between titin conformation and the magnitude of applied force. They also suggest the presence of torsional stiffness in the molecule, which may affect considerations of elasticity.

Extensibility in the titin molecule and its relation to muscle elasticity

Studies of the origins of muscle passive tension have revealed a direct relationship between elasticity and the mechanical properties of the titin molecule. 'Molecular combing' has made it possible to visualize with high resolution changes in the configuration and structure of isolated titin caused by mechanical forces. The differential extensibility seen in individual molecules is consistent with the important role suggested for the PEVK-region in muscle elasticity. An additional factor emphasizing compliance of this part of the molecule in muscle may relate to the arrangement of the titin filament system in the sarcomere, in particular to titin interactions with thick and thin filaments. The branching of titin network near the PEVK-region suggests that, in addition to conferring extensibility, it may also be important in facilitating the transition of titin intermolecular interactions between the arrays of thick and thin filaments.

Titin and the sarcomere symmetry paradox

Titin is thought to play a major role in myofibril assembly, elasticity and stability. A single molecule spans half the sarcomere and makes interactions with both a thick filament and the Z-line. In the unit cell structure of each half sarcomere there is one thick filament with 3-fold symmetry and two thin filaments with approximately 2-fold symmetry. The minimum number of titin molecules that could satisfy both these symmetries is 12. We determined the actual number of titin molecules in a unit cell from scanning transmission electron microscopy mass measurements of end-filaments. One of these emerges from each tip of the thick filament and is thought to be the in-register aggregate of the titin molecules associated with the filament. The mass per unit length of the end-filament (17.1 kDa/nm) is consistent with six titin molecules not 12. Thus the number of titin molecules present is insufficient to satisfy both symmetries. We suggest a novel solution to this paradox in which four of the six titin molecules interact with the two thin filaments in the unit cell, while the remaining two interact with the two thin filaments that enter the unit cell from the adjacent sarcomere. This arrangement would augment mechanical stability in the sarcomere.

A role for C-protein in the regulation of contraction and intracellular Ca2+ in intact rat ventricular myocytes

1. C-protein is a major component of muscle thick filaments whose function is unknown. We have examined for the first time the role of the regulatory binding domain of C-protein in modulating contraction and intracellular Ca2+ concentration ([Ca2+]i) in intact cardiac myocytes. 2. Rat ventricular myocytes were reversibly permeabilised with the pore-forming toxin streptolysin O. Myosin S2 (which binds to the regulatory domain of C-protein) was introduced into cells during permeabilisation to compete with the endogenous C-protein-thick filament interaction. 3. Introduction of S2 into myocytes increased contractility by approximately 30%, significantly lengthened the time to peak of the contraction and the time to half-relaxation, but had no effect on [Ca2+]i transient amplitude. 4. Our data are consistent with increased myofilament Ca2+ sensitivity when there is reduced binding of C-protein to myosin near the head-tail junction. 5. We propose that the effects of introducing S2 into intact cardiac cells can be equated with the consequences of selectively phosphorylating C-protein in vivo, and that the regulation of contraction by C-protein is mediated by the effects of crossbridge cycling on the Ca2+ affinity of troponin C.

Two-headed binding of a processive myosin to F-actin

Myosins are motor proteins in cells. They move along actin by changing shape after making stereospecific interactions with the actin subunits. As these are arranged helically, a succession of steps will follow a helical path. However, if the myosin heads are long enough to span the actin helical repeat (approximately 36 nm), linear motion is possible. Muscle myosin (myosin II) heads are about 16 nm long, which is insufficient to span the repeat. Myosin V, however, has heads of about 31 nm that could span 36 nm and thus allow single two-headed molecules to transport cargo by walking straight. Here we use electron microscopy to show that while working, myosin V spans the helical repeat. The heads are mostly 13 actin subunits apart, with values of 11 or 15 also found. Typically the structure is polar and one head is curved, the other straighter. Single particle processing reveals the polarity of the underlying actin filament, showing that the curved head is the leading one. The shape of the leading head may correspond to the beginning of the working stroke of the motor. We also observe molecules attached by one head in this conformation.

Titin: a molecular control freak

Recent studies of the giant protein titin have shed light on its roles in muscle assembly and elasticity and include the surprising findings described here. We now know that the titin kinase domain, which has long been a puzzle, has a novel regulation mechanism. A substrate, telethonin, has been identified that is located over one micron away from the kinase domain in mature muscle. Single-molecule studies have demonstrated the fascinating process of reversible mechanical unfolding of titin. Lastly, and most surprisingly, it has been claimed that titin controls assembly and elasticity in chromosomes.

Observation of transient disorder during myosin subfragment-1 binding to actin by stopped-flow fluorescence and millisecond time resolution electron cryomicroscopy: evidence that the start of the crossbridge power stroke in muscle has variable geometry

The mechanism of binding of myosin subfragment-1 (S1) to actin in the absence of nucleotides was studied by a combination of stopped-flow fluorescence and ms time resolution electron microscopy. The fluorescence data were obtained by using pyrene-labeled actin and exhibit a lag phase. This demonstrates the presence of a transient intermediate after the collision complex and before the formation of the stable "rigor" complex. The transient intermediate predominates 2-15 ms after mixing, whereas the rigor complex predominates at time >50 ms. Electron microscopy of acto-S1 frozen 10 ms after mixing revealed disordered binding. Acto-S1 frozen at 50 ms or longer showed the "arrowhead" appearance characteristic of rigor. The most likely explanation of the disorder of the transient intermediate is that the binding is through one or more flexible loops on the surfaces of the proteins. The transition from disordered to ordered binding is likely to be part of the force-generating step in muscle.

A computer-controlled spraying-freezing apparatus for millisecond time-resolution electron cryomicroscopy

Apparatus is described for the kinetic investigation of biological reactions by electron cryomicroscopy with time resolution on the order of milliseconds. This involves layering a grid with one reactant and then spraying on a second reactant immediately before freezing. Two-stage mixing can be achieved by mixing two solutions, holding them in a delay line for a preset interval, and then spraying the aged solution onto a grid carrying a third reactant. The individual steps of these procedures are under software control and can be adjusted independently. Spray-freezing is widely applicable since solutions of small molecules, proteins, and protein assemblies can be delivered as aerosols. Thus the method can be used to study both the effects of small molecules on macromolecules and for monitoring protein-protein interactions. It may also be useful in other situations, for instance in light microscopy.

Flexibility within myosin heads revealed by negative stain and single-particle analysis

Electron microscopy of negatively stained myosin has previously revealed three discrete regions within the heads of the molecule. However, despite a probable resolution of approximately 2 nm, it is difficult to discern directly consistent details within these regions. This is due to variability in both head conformation and in staining. In this study, we applied single-particle image processing and classified heads into homogeneous groups. The improved signal-to-noise ratio after averaging these groups reveals substantially improved detail. The image averages were compared to a model simulating negative staining of the atomic structure of subfragment-1 (S1). This shows that the three head regions correspond to the motor domain and the essential and regulatory light chains. The image averages were very similar to particular views of the S1 model. They also revealed considerable flexibility between the motor and regulatory domains, despite the molecules having been prepared in the absence of nucleotide. This flexibility probably results from rotation of the regulatory domain about the motor domain, where the relative movement of the regulatory light chain is up to 12 nm, and is most clearly illustrated in animated sequences (available at http://www.leeds.ac.uk/chb/muscle/myosinhead.htm l). The sharply curved conformation of the atomic model of S1 is seen only rarely in our data, with straighter heads being more typical.

Elasticity and unfolding of single molecules of the giant muscle protein titin

The giant muscle protein titin, also called connectin, is responsible for the elasticity of relaxed striated muscle, as well as acting as the molecular scaffold for thick-filament formation. The titin molecule consists largely of tandem domains of the immunoglobulin and fibronectin-III types, together with specialized binding regions and a putative elastic region, the PEVK domain. We have done mechanical experiments on single molecules of titin to determine their visco-elastic properties, using an optical-tweezers technique. On a fast (0.1s) timescale titin is elastic and force-extension data can be fitted with standard random-coil polymer models, showing that there are two main sources of elasticity: one deriving from the entropy of straightening the molecule; the other consistent with extension of the polypeptide chain in the PEVK region. On a slower timescale and above a certain force threshold, the molecule displays stress-relaxation, which occurs in rapid steps of a few piconewtons, corresponding to yielding of internal structures by about 20 nm. This stress-relaxation probably derives from unfolding of immunoglobulin and fibronectin domains.

Direct visualization of extensibility in isolated titin molecules

"Molecular combing" induced by a receding meniscus has been shown to extend individual titin molecules. Electron microscopy reveals that both ends of the molecule tend to attach to a mica substrate, probably due to their local positive charges. This leaves the remainder of the molecule free to be straightened and extended by forces of up to approximately 800 pN. A small region in the I-band part of the molecule, which probably corresponds to sequence high in P, E, V and K residues, is the most compliant and appears to extend by an unfolding of the polypeptide chain. Other parts of the molecule are also capable of extension. These mechanical extensions in titin are probably reversible.

Titin as a scaffold and spring. Cytoskeleton

The complete sequence of the giant muscle protein titin has been determined. It provides further insight into how titin may act both as a scaffold and a spring to specify and maintain muscle structure.

Studies of the interaction between titin and myosin

The interaction of titin with myosin has been studied by binding assays and electron microscopy. Electron micrographs of the titin-myosin complex suggest a binding site near the tip of the tail of the myosin molecule. The distance from the myosin head-tail junction to titin indicates binding 20-30 nm from the myosin COOH terminus. Consistent with this, micrographs of titin-light meromyosin (LMM) show binding near the end of the LMM molecule. Plots of myosin- and LMM-attachment positions along the titin molecule show binding predominantly in the region located in the A band in situ, which is consistent with the proposal that titin regulates thick filament assembly. Estimates of the apparent dissociation constant of the titin-LMM complex were approximately 20 nM. Assays of LMM cyanogen bromide fragments also suggested a strong binding site near the COOH terminus. Proteolysis of a COOH-terminal 17.6-kD CNBr fragment isolated from whole myosin resulted in eight peptides of which only one, comprising 17 residues, bound strongly to titin. Two isoforms of this peptide were detected by protein sequencing. Similar binding data were obtained using synthetic versions of both isoforms. The peptide is located immediately COOH-terminal of the fourth "skip" residue in the myosin tail, which is consistent with the electron microscopy. Skip-4 may have a role in determining thick filament structure, by allowing abrupt bending of the myosin tail close to the titin-binding site.

Millisecond time resolution electron cryo-microscopy of the M-ATP transient kinetic state of the acto-myosin ATPase

The structure of the AM-ATP transient kinetic state of the acto-myosin ATPase cycle has been examined by electron microscopy using frozen-hydrated specimens prepared in low ionic strength. By spraying grids layered with the acto-S1 complex with ATP immediately before freezing, it was possible to examine the structure of the ternary complex with a time resolution of 10 ms. Disordered binding of the S1 was observed, suggesting more than one attachment geometry. This could be due to the presence of more than one biochemical intermediate, or to a single intermediate binding in more than one conformation.

Titin and nebulin: protein rulers in muscle?

Titin and nebulin are giant muscle proteins, both of which are approximately 1 micron long and are composed of many repeating domains. Titin domains resemble type III fibronectin and C-2 immunoglobulins. Both proteins are likely to be involved in specifying and stabilizing the highly ordered structure of muscle, probably by acting as 'protein rulers' to regulate the assembly of myosin and actin filaments precisely.

Electron cryomicroscopy of acto-myosin-S1 during steady-state ATP hydrolysis

The structure of the complex of actin and myosin subfragment-1 (S1) during steady-state ATP hydrolysis has been examined by electron microscopy. This complex is normally dissociated by ATP in vitro but was stabilized here by low ionic strength. Optimal conditions for attachment were established by light-scattering experiments that showed that approximately 70% of S1 could be bound in the presence of ATP. Micrographs of the unstained complex in vitreous water suggest that S1 attaches to actin in a variety of configurations in ATP; this contrasts with the single attached configuration seen in the presence of ADP. The data are therefore compatible with the idea that a change in attached configuration of the myosin cross-bridge is the origin of muscle force. In control experiments where ATP was allowed to hydrolyze completely the binding of the S1 seemed cooperative.

Titin folding energy and elasticity

Molecules of the giant protein titin are responsible for the passive elasticity and central A-band location of muscle myofibrils. The molecular mechanism of titin elasticity is not known, but the I-band region of the molecule appears capable of approximately fourfold reversible extension. Such large extensions are likely to involve unfolding of titin domains. In the present experiments, equilibrium unfolding of titin from rabbit skeletal muscles was studied in vitro by fluorescence and circular dichroism spectroscopy, after addition of guanidinium chloride. The data suggest two unfolding transitions, both of which appear cooperative. The second transition is likely to involve complete unfolding of the immunoglobulin- and fibronectin-like domains from which the molecules is composed. The free energy associated with this transition is comparable with the energy required to extend titin molecules to the maximum amount seen in situ.

A survey of interactions made by the giant protein titin

A simple solid-phase binding assay was used to screen for interactions that the giant myofibrillar protein titin makes with other sarcomeric proteins. The titin used in the tests was purified by a modified procedure that results in isolation of approximately 20 mg relatively undegraded protein in &lt; 24 h. In addition to the approximately 3 MDa polypeptide, bands at approximately 160 kDa and approximately 100 kDa were also consistently seen on gels. Binding of titin to myosin, C-protein, X-protein and AMP-deaminase was observed. The interaction with myosin appears to be with the light meromyosin part of the molecule.

Understanding the functions of titin and nebulin

Individual molecules of the giant muscle proteins titin and nebulin span large distances in the sarcomere. Approximately one-third of the titin molecule forms elastic filaments linking the ends of thick filaments to the Z-line. The remainder of the molecule is probably bound to the thick filament where it may regulate assembly of myosin and the other thick filament proteins. This region also contains a sequence similar to catalytic domains in protein kinases. Nebulin appears to be associated with thin filaments and may regulate actin assembly.

Towards a molecular understanding of titin

Titin is at present the largest known protein (M(r) 3000 kDa) and its expression is restricted to vertebrate striated muscle. Single molecules span from M- to Z-lines and therefore over 1 micron. We have isolated cDNAs encoding five distant titin A-band epitopes, extended their sequences and determined 30 kb (1000 kDa) of the primary structure of titin. Sequences near the M-line encode a kinase domain and are closely related to the C-terminus of twitchin from Caenorhabditis elegans. This suggests that the function of this region in the titin/twitchin family is conserved throughout the animal kingdom. All other A-band sequences consist of 100 amino acid (aa) repeats predicting immunoglobulin-C2 and fibronectin type III globular domains. These domains are arranged into highly ordered 11 domain super-repeat patterns likely to match the myosin helix repeat in the thick filament. Expressed titin fragments bind to the LMM part of myosin and C-protein. Binding strength increases with the number of domains involved, indicating a cumulative effect of multiple binding sites for myosin along the titin molecule. We conclude that A-band titin is likely to be involved in the ordered assembly of the vertebrate thick filament.

Evidence that nebulin is a protein-ruler in muscle thin filaments

Partial amino acid sequence was obtained from the massive myofibrillar protein nebulin. This consists of repeating motifs of about 35 residues and super-repeats of 7 x 35 = 245 residues. The repeat-motifs are likely to be largely alpha-helical and to interact with both actin and tropomyosin in thin filaments. Nebulin from different species was found to vary in size in proportion to filament length. The data are consistent with the proposal that nebulin acts as a protein-ruler to regulate precise thin filament assembly.

Elastic filaments and giant proteins in muscle

Striated muscle is now known to contain a third major class of filaments, additional to the thick and thin filaments. The presence of such extra filaments has seemed likely for many years, but details of their location, structure, and composition are only now becoming clear. They are composed of massively large proteins and, in contrast to thick and thin filaments, they are elastic.

Concentration of solutes during preparation of aqueous suspensions for cryo-electron microscopy

It is demonstrated that solutes are likely to be significantly concentrated under conditions commonly used to prepare vitrified aqueous suspensions for transmission electron microscopy. Muscle thick filaments in such suspensions were largely dissolved, probably due to an increase in salt concentration caused by evaporation of water immediately prior to freezing. The extent of solubilization indicated that salts had been concentrated by at least 50%. Simple tests showed that, under the conditions used, the rate of reduction in the height of a thin water layer was approximately 1 micron/s. Apparatus is described which reduces evaporation, by clamping the hydrated grid in a filter paper sandwich until just before it enters the ethane coolant. High-speed cine photography showed that, using this device, exposure of the thinned specimen to the atmosphere was approximately 200-fold less. Frozen-hydrated thick filaments prepared using the device had the expected length of about 1.6 microns.

Electron microscopy of negatively stained scallop myosin molecules. Effect of regulatory light chain removal on head structure

The heads of myosin molecules from the striated adductor muscle of scallop have been studied by electron microscopy after negative staining. In common with vertebrate skeletal muscle myosin visualized by this method, the scallop myosin heads were pear-shaped and often showed pronounced curvature. Staining suggestive of two or, more frequently, three domains could often be observed. Removal of regulatory light chains (R-LCs) resulted in a reduction in the length of the heads of about 2.6 nm, with no significant change in maximum width. In desensitized preparations a majority of heads displayed anticlockwise curvature, whereas intact heads were usually seen curved clockwise. Analysis of the head curvature in both intact and desensitized molecules was consistent with an ability of each head to rotate about its long axis. Desensitization resulted in an increased incidence of heads showing two domains. It seems likely that the reduction in length upon removal of the R-LC is due to the two small domains located in the neck region of the head collapsing into one.

A rationale for the non-mutagenicity of 2- and 3-aminobiphenyls

Of the three isomeric forms of aminobiphenyl, only 4-aminobiphenyl is an established carcinogen while the 2-isomer is considered as a non-carcinogen and 3-aminobiphenyl is at best described as a weak carcinogen. In the present studies we investigated the mutagenicity of these three compounds, their N-hydroxy derivatives and their nitrosoderivatives in the Ames test using the Salmonella typhimurium strains TA98 and TA100. The studies were performed both in the absence and presence of an activation system derived from the liver of rats pretreated with Aroclor 1254. Of the three isomers only 4-aminobiphenyl exhibited mutagenicity and only in the presence of an activation system. N-Hydroxy-4-aminobiphenyl was a potent direct mutagen in both bacterial strains, N-hydroxy-2-aminobiphenyl was mutagenic in only TA100 while N-hydroxy-3-aminobiphenyl displayed mutagenicity in neither strain. Both 2- and 3-nitrosobiphenyls were direct mutagens in strain TA100. These findings suggest that the weak carcinogenicity of 3-aminobiphenyl may be attributed to the lack of genotoxicity of its N-hydroxyderivative, whereas in the case of 2-aminobiphenyl it may be due to the inability of the hepatic preparations to catalyse its N-hydroxylation, which is in agreement with published in vivo metabolic studies. It is interesting that of the three isomers only 2-aminobiphenyl is non-planar, forming a dihedral angle of 40 degrees, and this may preclude it from acting as a substrate of the P-450I family of haemoproteins, which selectively catalyses the N-hydroxylation of many aromatic amines including 4-aminobiphenyl.

Metabolic activation of chemical carcinogens by hepatic preparations from streptozotocin-treated rats

The effect of insulin-dependent diabetes on the hepatic microsomal activation of chemical carcinogens to mutagenic intermediates in the Ames test was investigated in rats pretreated with streptozotocin. In order to discern between the effects of streptozotocin itself and that of the resulting diabetes, groups of streptozotocin-treated rats received either nicotinamide simultaneously with the diabetogenic agent to prevent the onset of diabetes or daily treatment with insulin in order to antagonise the effects of diabetes. The activation of two nitrosamines, nitrosopiperidine and nitrosopyrrolidine was markedly increased following treatment of the animals with streptozotocin, the effect being preventable by nicotinamide and effectively antagonised by insulin. A similar increase in mutagenic response was also seen when Glu-P-1, a carcinogen generated during the cooking of proteinaceous food, was employed as the mutagen. In contrast, the diabetic rats were less efficient than control animals in activating the aromatic amine 2-aminofluorene to mutagenic intermediates. Concomitant administration of nicotinamide with streptozotocin prevented the decrease in mutagenicity, and daily treatment of diabetic rats with insulin partially restored mutagenic response to control levels. Streptozotocin-induced diabetes had no effect on the mutagenicity of 4-aminobiphenyl and the two polycyclic aromatic hydrocarbons, benzo(a)pyrene and 3-methylcholanthrene. The present findings clearly illustrate that diabetes modulates the metabolic activation of carcinogenic chemicals, the effect being dependent on the nature of the carcinogen.

Does titin regulate the length of muscle thick filaments?

The protein titin has been localized by electron microscopy of myofibrils labelled with monoclonal antibodies. The data are consistent with individual titin molecules extending from near the M-line to beyond the ends of thick filaments, a distance of approximately 1 micron. In the A-band, titin appears to be bound to thick filaments, probably to the outside of the filament shaft. Molecules of titin in this configuration provided an obvious mechanism by which the length of thick filaments could be regulated accurately.

Induction of the rat hepatic microsomal mixed-function oxidases by two aza-arenes. A comparison with their non-heterocyclic analogues

The ability of the aza-aromatic polycyclic aromatic hydrocarbons 10-azobenz(a)pyrene and benz(a)acridine to induce the rat hepatic microsomal mixed-function oxidases was compared to that of their non-heterocyclic analogues benz(a)pyrene and benz(a)anthracene respectively. All four hydrocarbons markedly increased the O-deethylations of ethoxyresorufin and ethoxycoumarin, the non-heterocyclic analogues being the more potent. A more modest increase was seen in the O-dealkylation of pentoxyresorufin. All four hydrocarbons induced proteins recognised by antibodies to cytochrome P-450IAI but no increase was seen when antibodies to cytochrome P-450IIB1 were employed. The metabolic activation of benz(a)pyrene and Glu-P-1 to mutagenic intermediates in the Ames test was enhanced by all pretreatments. It is concluded that the aza-aromatic polycyclic hydrocarbons, like their non-heterocyclic analogues, selectively induce the cytochrome P-450I family of proteins.

Visualization of domains in native and nucleotide-trapped myosin heads by negative staining

Electron microscopy of negatively stained vertebrate skeletal muscle myosin molecules has revealed substructure suggestive of globular domains in the head portions of the molecule. This head substructure has been examined after both low and high electron doe. The results suggest it is probably not an artefact of radiation damage. The most common appearance is of one or two stain-filled clefts which run roughly perpendicular to the long axis of the head, giving rise to the appearance of two or three domains in a line. A large domain is located at the end of the head, while two smaller domains are arranged between this and the head-tail junction. The size of the large distal domain (about 10 nm long and about 7 nm wide at its widest point) is similar in heads showing either two or three domains. Stable analogues of M.ATP and M.ADP.Pi, the predominant complexes present during hydrolysis of ATP by myosin, were prepared by crosslinking the two reactive SH groups (SH1 and SH2) in the myosin head heavy chain with N,N'-p-phenylenedimaleimide (pPDM) in the presence of ADP, and by forming a complex with vanadate ion and ADP. At this resolution (approximately 2 nm) the heads of these modified molecules did not appear markedly different from those of the untreated protein, although there was a small increase in the number of straight as opposed to curved heads after cross-linking with pPDM.

Streptozotocin-induced diabetes modulates the metabolic activation of chemical carcinogens

The effect of chemically-induced diabetes on the hepatic microsomal mixed-function oxidase system and the activation of chemical carcinogens was investigated in animals treated with streptozotocin (STZ). In order to distinguish between the effects of the diabetogenic chemical per se and that of the diabetic state, groups of STZ-treated animals received either nicotinamide simultaneously with STZ to prevent the onset of diabetes, or daily treatment with insulin in order to reverse the effects of diabetes. STZ-treated animals exhibited higher pentoxyresorufin O-dealkylase, ethoxy-resorufin O-deethylase, ethoxycoumarin O-deethylase, aniline p-hydroxylase and NADPH-cytochrome c reductase activities; similarly, increases were seen in cytochrome P-450 and b5 levels. All of these effects were prevented by nicotinamide and, at least partly, antagonised by insulin therapy. Treatment of animals with STZ markedly increased the activation, by liver microsomes in vitro, of Trp-P-1 and Trp-P-2 to mutagens, the effect being totally preventable by nicotinamide and successfully antagonised with insulin therapy. The diabetic animals were similarly more efficient in activating MeIQ but the effect was not preventable by nicotinamide or reversed by insulin. In contrast no changes were seen in the activation of IQ and only a modest increase in the case of MeIQx. It is concluded that diabetes may modulate the metabolic activation of some chemical carcinogens, presumably by changing the ratio of the various cytochrome P-450 isoenzymes.

Electron microscope study of the effect of temperature on the length of the tail of the myosin molecule

The effect of temperature on the length of the tail of the myosin molecule has been studied by negative staining of molecules immobilized on carbon substrates at different temperatures. In buffers containing chloride as the principal anion, tail length was approximately constant up to 25 degrees C. Above this temperature, it shortened linearly with increasing temperature up to 42 degrees C, the highest temperature studied in this solvent. The amount of shortening per degree C was about 1.2 nm. A similar amount of shortening per degree C was seen in acetate-containing buffers up to 50 degrees C, but in this case it did not begin until the temperature exceeded about 40 degrees C. A large fraction of the observed shortening was localized in a region that lies roughly between the two positions in the tail where proteolysis results in production of short or long subfragment-2. Frequently, the tail had a different appearance in this region from elsewhere and could sometimes be seen to split into two strands that were separate but coiled around one another.

Cryo-electron microscopy and three-dimensional reconstruction of actin filaments

Actin filaments have been examined by electron microscopy whilst in a frozen-hydrated state. Filaments embedded in a vitreous water layer are basically similar to those prepared by negative staining and show characteristic helical substructure, where the pitches of the helices are about 70 nm and 6 nm. Variability in spacing between long pitch helix cross-over points has been observed, which is consistent with intrinsic angular disorder between successive filament subunits. Fourier transforms of the most ordered filaments show four strong layer lines that index as the first, fifth, sixth and seventh orders of a 35 nm repeat. A three-dimensional helical reconstruction, calculated to a resolution of about 4 nm, shows the individual subunits to be orientated with their long axes roughly perpendicular to the filament axis. Each subunit is somewhat curved and is resolved into two domains. Most connections between successive subunits appear to be made close to the filament axis. We also report on the performance of the specimen holder (Philips PW 5699) used in this work.

Negative staining of myosin molecules

A reproducible method has been developed for the negative staining of myosin molecules. The dimensions of stained molecules are in close agreement with those obtained by metal shadowing. Sharp bends in the tail, indicative of hinge regions, were observed at two positions 44 nm and 76 nm from the head-tail junction. The tail was often ill-defined at the position of the first (44 nm) bend. The bend positions may be sites of proteolytic cleavage that result in the production of long and short myosin subfragment S2. About half the molecules exhibited bending to various degrees at one or both of these positions, but cases where the tail folded back on itself in a 180 degrees bend were comparatively rare (approximately equal to 10%). However, in the absence of EGTA, a large fraction of the molecules (approximately equal to 80%) exhibited 180 degrees bends. A small region, approximately 20 nm long, at the tip of the tail often appears to be significantly different from the rest. The heads are about 19 nm long and roughly pear-shaped. Although sometimes straight, more often they show a pronounced curvature. Both senses of curvature were observed, but those curved in a clockwise manner were the most common, indicating preferential binding of one side of the head to the carbon substrate. An analysis of the different combinations of head shapes in individual molecules indicates that each head can rotate independently around its long axis. No preferred angle of orientation between the two heads in a molecule, or between either head and the tail could be found. Substructure has been observed within the heads.

Purification and properties of native titin

A procedure has been developed for the extraction and purification of the massive myofibrillar protein titin without exposing it to denaturing conditions. The form of the molecule that has been isolated is soluble at high ionic strength and alkaline pH, but precipitates in low salt or at pH values below 7. Sedimentation velocity experiments indicate that titin is a highly asymmetric molecule with a sedimentation coefficient of 13.4 S. This asymmetry is confirmed by electron microscopy of rotary-shadowed specimens, which shows string-like structures of diameter 40 A and lengths up to 8000 A. Significant differences were observed depending on whether the electron microscope specimens were prepared by spraying or by layering of the titin onto a mica substrate; we tentatively attribute these differences to elasticity in the titin, revealed by the high shearing forces that accompany spraying. In accord with this, the circular dichroism spectrum of titin indicates that its secondary structure is largely random coil, a conformation characteristic of elastic proteins such as elastin. Negative staining of titin again shows long string-like structures, but these can now be seen to have an appearance similar to a string of beads, where the spacing between successive beads is about 40 A. Very similar beaded strings have been observed also associated with negatively stained separated native thick filaments; these are found running alongside the cross-bridge regions and in coils near the filament ends. Since the periodicity of the strings is similar to that of end-filaments, recently identified structures at the tips of thick filaments, it is likely that end-filaments are formed from titin. Titin comprises approximately 9% of the myofibrillar mass, which means that it is the third most abundant protein in muscle. The possible role of titin in forming elastic filaments within myofibrils is discussed.

Structure of the myosin projections on native thick filaments from vertebrate skeletal muscle

Rabbit psoas muscle filaments, isolated in relaxing buffer from non-glycerinated muscle, have been applied to hydrophilic carbon films and stained with uranyl acetate. Electron micrographs were obtained under low-dose conditions to minimize specimen damage. Surrounding the filament backbone, except in the bare zone, is a fringe of clearly identifiable myosin heads. Frequently, both heads of individual myosin molecules are seen, and sometimes a section of the tail can be seen connecting the heads to the backbone. About half the expected number of heads can be counted, and they are uniformly distributed along the filament. The majority of heads appear curved. The remainder could be curved heads viewed from another aspect. Three times as many heads curve in a clockwise sense than in an anticlockwise sense, suggesting a preferential binding of one side of the head to the carbon film. The two heads of myosin molecules exhibit all the possible combinations of clockwise, anticlockwise and straight heads, and analysis of their relative frequencies suggests that the heads rotate freely and independently. The heads also adopt a wide range of angles of attachment to the tail. The lengths of heads cover a range of 14 to 26 nm, with a peak at 19 nm. The average maximum width is 6.5 nm. Both measurements are in excellent agreement with values for shadowed molecules. Since our data are from heads adsorbed to the film in relaxing conditions and the shadowed molecules were free of nucleotide, gross shape changes are not likely to be produced by nucleotide binding. The length of the link between the heads and the backbone was found to vary between 10 nm and 52 nm, with a broad peak at about 25 nm. Thus, the hinge point detected in the tail of isolated molecules was not usually the point from which the crossbridges swung out from the filament surface. The angle made by the link to the filament axis was between 20 degrees and 80 degrees, with a broad maximum around 45 degrees. These lengths and angles concur with our observation of an average limit of the crossbridges from the filament surface of 30 nm. This is sufficient to enable heads in the myofibril lattice to reach out beyond the nearest thin filament and should allow considerable flexibility for stereospecific binding to actin in active muscle.

Binding and location of AMP deaminase in rabbit psoas muscle myofibrils

It is shown that an interaction exists between AMP deaminase (EC 3.5.4.6) and myofibrils that is sufficiently strong (Kd congruent to 10(-10) M) for more than 99% of the binding sites for the enzyme to be filled in vivo. The binding is not strong enough, however, to stop removal of the enzyme during the extensive washing normally used in the preparation of myofibrils. Fluorescent antibodies to the enzyme label myofibrils close to the junction of the A- and I-bands. The invariance of the position of the antibody stripes at this site, over a range of sarcomere lengths, indicates that the enzyme is attached to the A-band. The intensity of the fluorescence declines in parallel with dissociation of the enzyme. In this muscle, the number of AMP deaminase binding sites per thick filament is approximately six, suggesting that the enzyme is located at a single axial position in each half A-band. Electron microscopy of negatively stained, antibody-labelled myofibrils reveals the distance between the AMP deaminase sites at opposite ends of an A-band to be 1.69(+/- 0.02 micron). Since the length of the A-band is 1.57 micron, the binding site for the enzyme must be significantly beyond where thick filaments have previously been thought to end.

Effect of substrate on freeze-dried and shadowed protein structures

Muscle thick filaments have been prepared for electron microscopy by a method involving freeze-drying and shadowing. The same method applied to filaments on three different substrates gives rise to quite different appearances. The filaments on one of the substrates, hydrophilic carbon, show new detail not previously observed.