Interfacial Modification of Lithium Metal Anode by Boron Nitride Nanosheets

Metallic lithium (Li) is the most attractive anode for Li batteries because it holds the highest theoretical specific capacity (3860 mA h g-1) and the lowest redox potential (-3.040 V vs SHE). However, the poor interface stability of the Li anode, which is caused by the high reactivity and dendrite formation of metallic Li upon cycling, leads to undesired electrochemical performance and safety issues. While two-dimensional boron nitride (BN) nanosheets have been utilized as an interfacial layer, the mechanism on how they stabilize the Li-electrolyte interface remains elusive. Here, we show how BN nanosheet interlayers suppress Li dendrite formation, enhance Li ion transport kinetics, facilitate Li deposition, and reduce electrolyte decomposition. We show through both simulation and experimental data that the desolvation process of a solvated Li ion within the interlayer nanochannels kinetically favors Li deposition. This process enables long cycling stability, reduced voltage polarization, improved interface stability, and negligible volume expansion. Their application as an interfacial layer in symmetric cells and full cells that display significantly improved electrochemical properties is also demonstrated. The knowledge gained in this study provides both critical insights and practical guidelines for designing a Li metal anode with significantly improved performance.

Strontium-doped mesoporous bioglass nanoparticles for enhanced wound healing with rapid vascularization

Tissue engineered skin and its substitutes have a promising future in wound healing. However, enabling fast formation of blood vessels during the wound healing process is still a huge challenge to the currently available wound substitutes. In this work, active mesoporous bioglass nanoparticles with a high specific surface area and doped with strontium (Sr) were fabricated for rapid microvascularization and wound healing. The as-prepared bioglass nanoparticles with Sr ions significantly promoted the proliferation of fibroblasts and microvascularization of human umbilical vein endothelial cells in vitro. Silk fibroin sponges encapsulating the nanoparticles accelerated wound healing by promoting the formation of blood vessels and epithelium in vivo. This work provides a strategy for the design and development of active biomaterials for enhancing wound healing by rapid vascularization and epithelial reconstruction.

Applications of X-Ray-Based Characterization in MXene Research

X-rays are a penetrating form of high-energy electromagnetic radiation with wavelengths ranging from 10 pm to 10 nm. Similar to visible light, X-rays provide a powerful tool to study the atoms and elemental information of objects. Different characterization methods based on X-rays are established, such as X-ray diffraction, small- and wide-angle X-ray scattering, and X-ray-based spectroscopies, to explore the structural and elemental information of varied materials including low-dimensional nanomaterials. This review summarizes the recent progress of using X-ray related characterization methods in MXenes, a new family of 2D nanomaterials. These methods provide key information on the nanomaterials, covering synthesis, elemental composition, and the assembly of MXene sheets and their composites. Additionally, new characterization methods are proposed as future research directions in the outlook section to enhance understanding of MXene surface and chemical properties. This review is expected to provide a guideline for characterization method selection and aid in precise interpretation of the experimental data in MXene research.

Dry-spun carbon nanotube ultrafiltration membranes tailored by anti-viral metal oxide coatings for human coronavirus 229E capture in water

Although waterborne virus removal may be achieved using separation membrane technologies, such technologies remain largely inefficient at generating virus-free effluents due to the lack of anti-viral reactivity of conventional membrane materials required to deactivating viruses. Here, a stepwise approach towards simultaneous filtration and disinfection of Human Coronavirus 229E (HCoV-229E) in water effluents, is proposed by engineering dry-spun ultrafiltration carbon nanotube (CNT) membranes, coated with anti-viral SnO₂ thin films via atomic layer deposition. The thickness and pore size of the engineered CNT membranes were fine-tuned by varying spinnable CNT sheets and their relative orientations on carbon nanofibre (CNF) porous supports to reach thicknesses less than 1 µm and pore size around 28 nm. The nanoscale SnO₂ coatings were found to further reduce the pore size down to ∼21 nm and provide more functional groups on the membrane surface to capture the viruses via size exclusion and electrostatic attractions. The synthesized CNT and SnO₂ coated CNT membranes were shown to attain a viral removal efficiency above 6.7 log₁₀ against HCoV-229E virus with fast water permeance up to ∼4 × 10³ and 3.5 × 10³ L.m^-2.h^-1.bar^-1, respectively. Such high performance was achieved by increasing the dry-spun CNT sheets up to 60 layers, orienting successive 30 CNT layers at 45°, and coating 40 nm SnO₂ on the synthesized membranes. The current study provides an efficient scalable fabrication scheme to engineer flexible ultrafiltration CNT-based membranes for cost-effective filtration and inactivation of waterborne viruses to outperform the state-of-the-art ultrafiltration membranes.

Construction of Cu7KS4@NixCo1-x(OH)2 Nano-Core-Shell Structures with High Conductivity and Multi-Metal Synergistic Effect for Superior Hybrid Supercapacitors

Reasonable design of materials with complex nanostructures and diverse chemical compositions is of great significance in the field of energy storage. Cu₇KS₄ (CKS) is considered a potential electrode material for supercapacitors due to its superior electrical conductivity. Transition metal hydroxides are widely used as electrode materials for supercapacitors due to their high theoretical specific capacitance (C_s); however, single metal species with limited active sites restrict their further applications for energy storage. Herein, through a hydrothermal reaction, CKS nanorods were prepared, and then binary metal hydroxide Ni_xCo_1-x(OH)₂ nanosheets were generated directly on CKS nanorods through a one-step hydrothermal reaction to form a nano-core-shell structure (NCSS). By regulating the mole ratio of nickel nitrate to cobalt nitrate, the resulting Ni_0.75Co_0.25(OH)₂ nanosheets with the best electrochemical activity were prepared and supported on CKS nanorods to form a CKS@N_0.75C_0.25OH NCSS. The as-prepared CKS@N_0.75C_0.25OH NCSS has a larger specific surface area, which can provide more active sites, while the abundant metal species composition can generate abundant redox reactions to boost the pseudocapacitance. The prepared CKS@N_0.75C_0.25OH/NF electrode exhibits outstanding specific capacitance and cycle life. The assembled CKS@N_0.75C_0.25OH/NF//AC all-solid-state asymmetric supercapacitor achieves a high energy density of 88.7 Wh kg^-1 at a power density of 849.9 W kg^-1 with superior cycle life. Therefore, the use of polymetallic hydroxides to construct NCSS electrodes has great research significance and broad application prospects.

Environmentally stable MXene ink for direct writing flexible electronics

MXene inks are promising candidates for fabricating conductive circuits and flexible devices. Here, MXene inks prepared from solvent mixtures demonstrate long-term stability and can be employed in commercial rollerball pens to write electronic circuits on flexible substrates. Such circuits exhibit a fast and accurate capacitive response for touch-boards and water level measurement, indicating the excellent potential of these MXene inks in electrical device fabrication.

Tough and Fatigue Resistant Cellulose Nanocrystal Stitched Ti3 C2 Tx MXene Films

Ti₃ C₂ T_x MXene (or "MXene" for simplicity) has gained noteworthy attention for its metal-like electrical conductivity and high electrochemical capacitance - a unique blend of properties attractive towards a wide range of applications such as energy storage, healthcare monitoring and electromagnetic interference shielding. However, processing MXene architectures using conventional methods often deals with the presence of defects, voids and isotropic flake arrangements, resulting in a trade-off in properties. Here, we report a sequential bridging (SB) strategy to fabricate dense, free-standing MXene films of interconnected flakes with minimal defects, significantly enhancing its mechanical properties, specifically tensile strength (∼285 MPa) and breaking energy (∼16.1 MJ m^-3 ), while retaining substantial values of electrical conductivity (∼3,050 S cm^-1 ) and electrochemical capacitance (∼920 F cm^-3 ). This SB method first involves forming a cellulose nanocrystal (CNC)-stitched MXene framework, followed by infiltration with structure-densifying calcium cations (Ca²⁺ ), resulting in tough and fatigue resistant films with anisotropic, evenly spaced, and strongly interconnected flakes - properties essential for developing high-performance energy-storage devices. We anticipate that the knowledge gained in this work will be extended towards improving the robustness and retaining the electronic properties of 2D nanomaterial-based macroarchitectures. This article is protected by copyright. All rights reserved.

Highly stable lithium anodes from recycled hemp textile

Three-dimensional lithium (Li) hosts have been shown to suppress the growth of Li dendrites for next generation Li metal batteries. Here, we report a cost-effective and scalable approach to produce highly stable Li composite anodes from industrial hemp textile waste. The hemp@Li composite anodes demonstrate stable cycling both in half and full cells.

Toughening Wet-Spun Silk Fibers by Silk Nanofiber Templating

Regenerated silk fibers typically fall short of silkworm cocoon fibers in mechanical properties due to reduced fiber crystal structure and alignment. One approach to address this has been to employ inorganic materials as reinforcing agents. The present study avoids the need for synthetic additives, demonstrating the first use of exfoliated silk nanofibers to control silk solution crystallization, resulting in all-silk pseudocomposite fibers with remarkable mechanical properties. Incorporating only 0.06 wt. % silk nanofibers led to a ∼44% increase in tensile strength (over 600 MPa) and ∼33% increase in toughness (over 200 kJ/kg) compared with fibers without silk nanofibers. These remarkable properties can be attributed to nanofiber crystal seeding in conjunction with fiber draw. The crystallinity nearly doubled from ∼17% for fiber spun from pure silk solution to ∼30% for the silk nanofiber reinforced sample. The latter fiber also shows a high degree of crystal orientation with a Herman's orientation factor of 0.93, a value which approaches that of natural degummed B. mori silk cocoon fiber (0.96). This study provides a strong foundation to guide the development of simple, eco-friendly methods to spin regenerated silk with excellent properties and a hierarchical structure that mimics natural silk. This article is protected by copyright. All rights reserved.

Scalable Fabrication of Ti3C2Tx MXene/RGO/Carbon Hybrid Aerogel for Organics Absorption and Energy Conversion

High aspect ratio two-dimensional Ti₃C₂T_x MXene flakes with extraordinary mechanical, electrical, and thermal properties are ideal candidates for assembling elastic and conductive aerogels. However, the scalable fabrication of large MXene-based aerogels remains a challenge because the traditional preparation method relies on supercritical drying techniques such as freeze drying, resulting in poor scalability and high cost. Herein, the use of porous melamine foam as a robust template for MXene/reduced graphene oxide aerogel circumvents the volume shrinkage during its natural drying process. Through this approach, we were able to produce large size (up to 600 cm³) MXene-based aerogel with controllable shape. In addition, the aerogels possess an interconnected cellular structure and display resilience up to 70% of compressive strain. Some key features also include high solvent absorption capacity (∼50-90 g g^-1), good photothermal conversion ability (an average evaporation rate of 1.48 kg m^-2 h^-1 for steam generation), and an excellent electrothermal conversion rate (1.8 kg m^-2 h^-1 at 1 V). More importantly, this passive drying process provides a scalable, convenient, and cost-effective approach to produce high-performance MXene-based aerogels, demonstrating the feasibility of commercial production of MXene-based aerogels toward practical applications.

Ti3C2Tx MXene: from dispersions to multifunctional architectures for diverse applications

The exciting combination of high electrical conductivity, high specific capacitance and colloidal stability of two-dimensional Ti₃C₂T_x MXene (referred to as MXene) has shown great potential in a wide range of applications including wearable electronics, energy storage, sensors, and electromagnetic interference shielding. To realize its full potential, recent literature has reported a variety of solution-based processing methodologies to develop MXenes into multifunctional architectures, such as fibres, films and aerogels. In response to these recent critical advances, this review provides a comprehensive analysis of the diverse solution-based processing methodologies currently being used for MXene-architecture fabrication. A critical evaluation of the processing challenges directly affecting macroscale material properties and ultimately, the performance of the resulting prototype devices is also provided. Opportunities arising from the observed and foreseen challenges regarding their use are discussed to provide avenues for new designs and realise practical use in high performance applications.

Interfacial Engineering of 3D Hollow Mo-Based Carbide/Nitride Nanostructures

Molybdenum carbide and nitride nanocrystals have been widely recognized as ideal electrocatalyst materials for water splitting. Furthermore, the interfacial engineering strategy can effectively tune their physical and chemical properties to improve performance. Herein, we produced N-doped molybdenum carbide nanosheets on carbonized melamine (N-doped Mo₂C@CN) and 3D hollow Mo₂C-Mo₂N nanostructures (3D H-Mo₂C-Mo₂N) with tuneable interfacial properties via high-temperature treatment. X-ray photoelectron spectroscopy reveals that Mo₂C and Mo₂N nanocrystals in 3D hollow nanostructures are chemically bonded with each other and produce stable heterostructures. The 3D H-Mo₂C-Mo₂N nanostructures demonstrate lower onset potential and overpotential at a current density of 10 mV cm^-2 than the N-doped Mo₂C@CN nanostructure due to its higher active sites and improved interfacial charge transfer. The current work presents a strategy to tune metal carbide/nitride nanostructures and interfacial properties for the production of high-performance energy materials.

Development and Applications of MXene-Based Functional Fibers

The increasing interest toward wearable and portable electronic devices calls for multifunctional materials and fibers/yarns capable of seamless integration with everyday textiles. To date, one particular gap inhibiting the development of such devices is the production of robust functional fibers with improved electronic conductivity and electrochemical energy storage capability. Recent efforts have been made to produce functional fibers with 2D carbides known as MXenes to address these demands. Ti₃C₂T_x MXene, in particular, is known for its metallic conductivity and high volumetric capacitance, and has shown promise for fibers and textile-based devices when used either as an additive, coating or the main fiber component. In this spotlight article, we highlight the recent exciting developments in our diverse efforts to fabricate MXene functionalized fibers, along with a critical evaluation of the challenges in processing, which directly affect macroscale material properties and the performance of the subsequent prototype devices. We also provide our assessment of observed and foreseen challenges of the current manufacturing methods and the opportunities arising from recent advances in the development of MXene fibers and paving future avenues for textile design and practical use in advanced applications.

Light-Controlled Ionic Transport through Molybdenum Disulfide Membranes

In recent years, two-dimensional (2D) nanomaterials have been extensively explored in the field of nanofluidics due to their interconnected and well-controlled nanochannels. In particular, the investigation of 2D nanomaterials using their intrinsic properties for smart nanofluidics is receiving increased interest. Here, we report that MoS₂ membranes can be used for light-controlled nanofluidic applications based on their photoelectrical properties. We show that the MoS₂ membranes exhibit surface charge-governed ionic transport in NaCl and KCl solution without light illumination, while the ionic conductivity of the MoS₂ membranes is up to 2 orders of magnitude higher at low concentration solution than that in bulk solution. We also show that the ionic conductivity of the membranes is enhanced under light illumination at 405 and 635 nm and reversible and stable switching of ionic current upon light illumination is observed. In addition, ionic current through membranes is enhanced by increasing light intensity. Therefore, our findings demonstrate that MoS₂ membranes can be a potential platform for light-controlled nanofluidic applications.

Interfacial piezoelectric polarization locking in printable Ti3C2Tx MXene-fluoropolymer composites

Piezoelectric fluoropolymers convert mechanical energy to electricity and are ideal for sustainably providing power to electronic devices. To convert mechanical energy, a net polarization must be induced in the fluoropolymer, which is currently achieved via an energy-intensive electrical poling process. Eliminating this process will enable the low-energy production of efficient energy harvesters. Here, by combining molecular dynamics simulations, piezoresponse force microscopy, and electrodynamic measurements, we reveal a hitherto unseen polarization locking phenomena of poly(vinylidene fluoride–co–trifluoroethylene) (PVDF-TrFE) perpendicular to the basal plane of two-dimensional (2D) Ti₃C₂T_x MXene nanosheets. This polarization locking, driven by strong electrostatic interactions enabled exceptional energy harvesting performance, with a measured piezoelectric charge coefficient, d₃₃, of −52.0 picocoulombs per newton, significantly higher than electrically poled PVDF-TrFE (approximately −38 picocoulombs per newton). This study provides a new fundamental and low-energy input mechanism of poling fluoropolymers, which enables new levels of performance in electromechanical technologies.

Fluoropolymers are state-of-the-art flexible piezoelectric materials, yet require massive energy inputs to function. Here, the authors show that the electrostatic field around a 2D material leads to polarization orientation and maximized piezoelectric performance, without external energy input.

Strategies for Integrated Capture and Conversion of CO2 from Dilute Flue Gases and the Atmosphere

The integrated capture and conversion of CO₂ has the potential to make valorization of the greenhouse gas more economically competitive, by eliminating energy-intensive regeneration processes. However, integration is hindered by the extremely low concentrations of CO₂ present in the atmosphere (0.04 vol.%), and the presence of acidic gas contaminants, such as SO_x and NO_x , in flue gas streams. This Review summarizes the latest technological progress in the integrated capture and conversion of CO₂ from dilute flue gases and atmospheric air. In particular, the Review analyzes the correlation between material properties and their capture and conversion efficiency through hydrogenation, cycloaddition, and solar thermal-mediated electrochemical processes, with a focus on the types and quantities of product generated, in addition to their energy requirements. Prospects for commercialization are also highlighted and suggestions are made for future research.

Superelastic Ti3C2Tx MXene-Based Hybrid Aerogels for Compression-Resilient Devices

Superelastic aerogels with excellent electrical conductivity, reversible compressibility, and high durability hold great potential for varied emerging applications, ranging from wearable electronics to multifunctional scaffolds. In the present work, superelastic MXene/reduced graphene oxide (rGO) aerogels are fabricated by mixing MXene and GO flakes, followed by a multistep reduction of GO, freeze-casting, and finally an annealing process. By optimizing both the composition and reducing conditions, the resultant aerogel shows a reversible compressive strain of 95%, surpassing all current reported values. The conducting MXene/rGO network provides fast electron transfer and stable structural integrity under compression/release cycles. When assembled into compressible supercapacitors, 97.2% of the capacitance was retained after 1000 compression/release cycles. Moreover, the high conductivity and porous structure also enabled the fabrication of a piezoresistive sensor with high sensitivity (0.28 kPa^-1), wide detection range (up to 66.98 kPa), and ultralow detection limit (∼60 Pa). It is envisaged that the superelasticity of MXene/rGO aerogels offers a versatile platform for utilizing MXene-based materials in a wide array of applications including wearable electronics, electromagnetic interference shielding, and flexible energy storage devices.

Unipolar stroke, electroosmotic pump carbon nanotube yarn muscles

Success in making artificial muscles that are faster and more powerful and that provide larger strokes would expand their applications. Electrochemical carbon nanotube yarn muscles are of special interest because of their relatively high energy conversion efficiencies. However, they are bipolar, meaning that they do not monotonically expand or contract over the available potential range. This limits muscle stroke and work capacity. Here, we describe unipolar stroke carbon nanotube yarn muscles in which muscle stroke changes between extreme potentials are additive and muscle stroke substantially increases with increasing potential scan rate. The normal decrease in stroke with increasing scan rate is overwhelmed by a notable increase in effective ion size. Enhanced muscle strokes, contractile work-per-cycle, contractile power densities, and energy conversion efficiencies are obtained for unipolar muscles.

Spinning Regenerated Silk Fibers with Improved Toughness by Plasticizing with Low Molecular Weight Silk

Low-molecular weight (LMW) silk was utilized as a LMW silk plasticizer for regenerated silk, generating weak physical crosslinks between high-molecular weight (HMW) silk chains in the amorphous regions of a mixed solution of HMW/LMW silk. The plasticization effect of LMW silk was investigated using mechanical testing, Raman spectroscopy, and wide-angle X-ray scattering (WAXS). Small amounts (10%) of LMW silk resulted in a 19.4% enhancement in fiber extensibility and 37.8% increase in toughness. The addition of the LMW silk facilitated the movement of HMW silk chains during drawing, resulting in an increase in molecular chain orientation when compared with silk spun from 100% HMW silk solution. The best regenerated silk fibers produced in this work had an orientation factor of 0.94 and crystallinity of 47.82%, close to the values of natural degummedBombyx mori silk fiber. The approach and mechanism elucidated here can facilitate artificial silk systems with enhanced properties.

Transition Metal Dichalcogenide (TMD) Membranes with Ultrasmall Nanosheets for Ultrafast Molecule Separation

Two-dimensional (2D) transition metal dichalcogenide membranes have entered the spotlight for nanofiltration application owing to the novel mass transport properties in nanochannels. However, further improving the water permeability with high molecular separation rate simultaneously is challenging. In this work, to achieve ultrafast molecule separation, MoS₂ and WS₂ nanosheets with ultrasmall lateral size (<100 nm) are fabricated by sucrose-assisted mechanochemical exfoliation. Ultrasmall nanosheets in the membranes cut down average length of water-transporting paths and create more nanochannels and nanocapillaries for water molecules to pass through membranes. The water flux of these kinds of MoS₂ and WS₂ membranes are significantly enhanced to 918 and 828 L/m² h bar, respectively, which is four and two times higher than those of previously reported MoS₂ and WS₂ membranes with larger lateral size nanosheets. In addition, MoS₂ and WS₂ membranes display excellent rejection performance for rhodamine B and Evans blue with a high rejection rate (∼99%). This study provides a promising method to improve the performance of 2D laminar membranes for nanofiltration application by using ultrasmall 2D nanosheets.

Mechanochromic and Thermochromic Sensors Based on Graphene Infused Polymer Opals

High quality opal-like photonic crystals containing graphene are fabricated using evaporation-driven self-assembly of soft polymer colloids. A miniscule amount of pristine graphene within a colloidal crystal lattice results in the formation of colloidal crystals with a strong angle-dependent structural color and a stop band that can be reversibly shifted across the visible spectrum. The crystals can be mechanically deformed or can reversibly change color as a function of their temperature, hence their sensitive mechanochromic and thermochromic response make them attractive candidates for a wide range of visual sensing applications. In particular, it is shown that the crystals are excellent candidates for visual strain sensors or integrated time-temperature indicators which act over large temperature windows. Given the versatility of these crystals, this method represents a simple, inexpensive, and scalable approach to produce multifunctional graphene infused synthetic opals and opens up exciting applications for novel solution-processable nanomaterial based photonics.

Cathodic electrogenerated chemiluminescence of tris(2,2'-bipyridine)ruthenium(ii) and peroxydisulfate at pure Ti3C2Tx MXene electrodes

We demonstrate the first use of pure films of two-dimensional (2D) transition metal carbides and nitrides (Ti₃C₂T_x MXene) as an electrode material for electrogenerated chemiluminescence (ECL). The Ti₃C₂T_x MXene electrodes exhibited excellent electrochemical stability in the cathodic scan range and produced bright reductive-oxidation ECL using peroxydisulfate as a co-reactant with the tris(2,2'-bipyridine)ruthenium(ii) ([Ru(bpy)₃]²⁺) luminophore.

Freezing Titanium Carbide Aqueous Dispersions for Ultra-long-term Storage

Two-dimensional titanium carbide (Ti₃C₂T_x), or MXene, is a new nanomaterial that has attracted increasing interest due to its metallic conductivity, good solution processability, and excellent energy storage performance. However, Ti₃C₂T_x MXene flakes suffer from degradation through oxidation due to prolonged exposure to oxygenated water. Preventing the occurrence of oxidation, i.e., the formation of TiO₂ particles, was found to be crucial in maintaining MXene quality. In the present work, we found that freezing aqueous MXene dispersions at a low temperature can effectively prevent the formation of TiO₂ nanoparticles at the flake edge, which is known as the early stage of oxidation. The Ti₃C₂T_x flakes in frozen dispersion remain consistent in morphology and elemental composition for over 650 days, compared with freshly synthesized MXene, which in contrast exhibits flake edge degradation within two days when stored at room temperature. This result suggests that freezing a MXene dispersion dramatically postpones the oxidation of MXene flakes and that the stored MXene dispersion can be treated as freshly prepared MXene. This work not only fundamentally fulfilled the study on temperature dependence of MXene oxidation but has also demonstrated a simple method to extend the shelf life of MXene aqueous dispersion to years, which will be a cornerstone for large-scale production of MXene and ultimately benefit the research on MXenes.

Bath Electrospinning of Continuous and Scalable Multifunctional MXene-Infiltrated Nanoyarns

Electroactive yarns that are stretchable are desired for many electronic textile applications, including energy storage, soft robotics, and sensing. However, using current methods to produce these yarns, achieving high loadings of electroactive materials and simultaneously demonstrating stretchability is a critical challenge. Here, a one-step bath electrospinning technique is developed to effectively capture Ti₃ C₂ T_x MXene flakes throughout continuous nylon and polyurethane (PU) nanofiber yarns (nanoyarns). With up to ≈90 wt% MXene loading, the resulting MXene/nylon nanoyarns demonstrate high electrical conductivity (up to 1195 S cm^-1 ). By varying the flake size and MXene concentration, nanoyarns achieve stretchability of up to 43% (MXene/nylon) and 263% (MXene/PU). MXene/nylon nanoyarn electrodes offer high specific capacitance in saturated LiClO₄ electrolyte (440 F cm^-3 at 5 mV s^-1 ), with a wide voltage window of 1.25 V and high rate capability (72% between 5 and 500 mV s^-1 ). As strain sensors, MXene/PU yarns demonstrate a wide sensing range (60% under cyclic stretching), high sensitivity (gauge factor of ≈17 in the range of 20-50% strain), and low drift. Utilizing the stretchability of polymer nanofibers and the electrical and electrochemical properties of MXene, MXene-based nanoyarns demonstrate potential in a wide range of applications, including stretchable electronics and body movement monitoring.

Scalable Manufacturing of Free-Standing, Strong Ti3 C2 Tx MXene Films with Outstanding Conductivity

Free-standing films that display high strength and high electrical conductivity are critical for flexible electronics, such as electromagnetic interference (EMI) shielding coatings and current collectors for batteries and supercapacitors. 2D Ti₃ C₂ T_x flakes are ideal candidates for making conductive films due to their high strength and metallic conductivity. It is, however, challenging to transfer those outstanding properties of single MXene flakes to macroscale films as a result of the small flake size and relatively poor flake alignment that occurs during solution-based processing. Here, a scalable method is shown for the fabrication of strong and highly conducting pure MXene films containing highly aligned large MXene flakes. These films demonstrate record tensile strength up to ≈570 MPa for a 940 nm thick film and electrical conductivity of ≈15 100 S cm^-1 for a 214 nm thick film, which are both the highest values compared to previously reported pure Ti₃ C₂ T_x films. These films also exhibit outstanding EMI shielding performance (≈50 dB for a 940 nm thick film) that exceeds other synthetic materials with comparable thickness. MXene films with aligned flakes provide an effective route for producing large-area, high-strength, and high-electrical-conductivity MXene-based films for future electronic applications.

Additive-Free MXene Liquid Crystals and Fibers

The discovery of liquid crystalline (LC) phases in dispersions of two-dimensional (2D) materials has enabled the development of macroscopically aligned three-dimensional (3D) macrostructures. Here, we report the first experimental observation of self-assembled LC phases in aqueous Ti₃C₂T _x MXene inks without using LC additives, binders, or stabilizing agents. We show that the transition concentration from the isotropic to nematic phase is influenced by the aspect ratio of MXene flakes. The formation of the nematic LC phase makes it possible to produce fibers from MXenes using a wet-spinning method. By changing the Ti₃C₂T _x flake size in the ink formulation, coagulation bath, and spinning parameters, we control the morphology of the MXene fibers. The wet-spun Ti₃C₂T _x fibers show a high electrical conductivity of ∼7750 S cm^-1, surpassing existing nanomaterial-based fibers. A high volumetric capacitance of ∼1265 F cm^-3 makes Ti₃C₂T _x fibers promising for fiber-shaped supercapacitor devices. We also show that Ti₃C₂T _x fibers can be used as heaters. Notably, the nematic LC phase can be achieved in other MXenes (Mo₂Ti₂C₃T _x and Ti₂CT _x ) and in various organic solvents, suggesting the widespread LC behavior of MXene inks.

Wet-Spun Trojan Horse Cell Constructs for Engineering Muscle

Engineering of 3D regenerative skeletal muscle tissue constructs (skMTCs) using hydrogels containing muscle precursor cells (MPCs) is of potential benefit for repairing Volumetric Muscle Loss (VML) arising from trauma (e.g., road/industrial accident, war injury) or for restoration of functional muscle mass in disease (e.g., Muscular Dystrophy, muscle atrophy). Additive Biofabrication (AdBiofab) technologies make possible fabrication of 3D regenerative skMTCs that can be tailored to specific delivery requirements of VML or functional muscle restoration. Whilst 3D printing is useful for printing constructs of many tissue types, the necessity of a balanced compromise between cell type, required construct size and material/fabrication process cyto-compatibility can make the choice of 3D printing a secondary alternative to other biofabrication methods such as wet-spinning. Alternatively, wet-spinning is more amenable to formation of fibers rather than (small) layered 3D-Printed constructs. This study describes the fabrication of biosynthetic alginate fibers containing MPCs and their use for delivery of dystrophin-expressing cells to dystrophic muscle in the mdx mouse model of Duchenne Muscular Dystrophy (DMD) compared to poly(DL-lactic-co-glycolic acid) copolymer (PLA:PLGA) topically-seeded with myoblasts. In addition, this study introduces a novel method by which to create 3D layered wet-spun alginate skMTCs for bulk mass delivery of MPCs to VML lesions. As such, this work introduces the concept of "Trojan Horse" Fiber MTCs (TH-fMTCs) and 3d Mesh-MTCs (TH-mMTCs) for delivery of regenerative MPCs to diseased and damaged muscle, respectively.

Facile Solution Processing of Stable MXene Dispersions towards Conductive Composite Fibers

2D transition metal carbides and nitrides called "MXene" are recent exciting additions to the 2D nanomaterials family. The high electrical conductivity, specific capacitance, and hydrophilic nature of MXenes rival many other 2D nanosheets and have made MXenes excellent candidates for diverse applications including energy storage, electromagnetic shielding, water purification, and photocatalysis. However, MXene nanosheets degrade relatively quickly in the presence of water and oxygen, imposing great processing challenges for various applications. Here, a facile solvent exchange (SE) processing route is introduced to produce nonoxidized and highly delaminated Ti3C2T x MXene dispersions. A wide range of organic solvents including methanol, ethanol, isopropanol, butanol, acetone, dimethylformamide, dimethyl sulfoxide, chloroform, dichloromethane, toluene, and n-hexane is used. Compared to known processing approaches, the SE approach is straightforward, sonication-free, and highly versatile as multiple solvent transfers can be carried out in sequence to yield MXene in a wide range of solvents. Conductive MXene polymer composite fibers are achieved by using MXene processed via the solvent exchange (SE) approach, while the traditional redispersion approach has proven ineffective for fiber processing. This study offers a new processing route for the development of novel MXene-based architectures, devices, and applications.

Ti3C2 MXene as a new nanofiller for robust and conductive elastomer composites

Ti3C2 MXene with a layered 2D structure was applied as a novel functional filler in rubber for the first time. A facile and green method was proposed to fabricate rubber/Ti3C2 nanocomposites via a freeze-drying & mechanical mixing process. It was found that Ti3C2 with ∼1 nm thickness fabricated by etching Al from Ti3AlC2 phases can be dispersed in styrene-butadiene rubber (SBR) evenly in a single-layered state. Mechanical strength and electrical and thermal conductivities of the rubber nanocomposites were remarkably enhanced by the incorporation of Ti3C2, showing dramatic improvement compared with reduced graphene oxide (rGO) reinforced rubber composites. For example, the thermal conductivity of SBR nanocomposites with 3 wt% rGO was 0.265 W m-1 k-1, while that of SBR nanocomposites with only 1.96 wt% Ti3C2 reached 0.477 W m-1 k-1. Meanwhile, the resistance of rubber/Ti3C2 nanocomposites was stable under complex deformation and their sensitivity was well recovered during stretching/shrinking cycles under large strain. Moreover, it was discovered that incorporating Ti3C2 in rubber nanocomposites dramatically improved the wet skid resistance and thermal stability without increasing the rolling resistance. Ti3C2 MXene with a distinctive structure and properties as well as uniform dispersion will have more potential for the preparation of high-performance rubber nanocomposites, especially for green tires and flexible sensors.

Highly Conductive Ti3 C2 Tx MXene Hybrid Fibers for Flexible and Elastic Fiber-Shaped Supercapacitors

Fiber-shaped supercapacitors (FSCs) are promising energy storage solutions for powering miniaturized or wearable electronics. However, the scalable fabrication of fiber electrodes with high electrical conductivity and excellent energy storage performance for use in FSCs remains a challenge. Here, an easily scalable one-step wet-spinning approach is reported to fabricate highly conductive fibers using hybrid formulations of Ti₃ C₂ T_x MXene nanosheets and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate. This approach produces fibers with a record conductivity of ≈1489 S cm^-1 , which is about five times higher than other reported Ti₃ C₂ T_x MXene-based fibers (up to ≈290 S cm^-1 ). The hybrid fiber at ≈70 wt% MXene shows a high volumetric capacitance (≈614.5 F cm^-3 at 5 mV s^-1 ) and an excellent rate performance (≈375.2 F cm^-3 at 1000 mV s^-1 ). When assembled into a free-standing FSC, the energy and power densities of the device reach ≈7.13 Wh cm^-3 and ≈8249 mW cm^-3 , respectively. The excellent strength and flexibility of the hybrid fibers allow them to be wrapped on a silicone elastomer fiber to achieve an elastic FSC with 96% capacitance retention when cyclically stretched to 100% strain. This work demonstrates the potential of MXene-based fiber electrodes and their scalable production for fiber-based energy storage applications.

High-Performance Biscrolled MXene/Carbon Nanotube Yarn Supercapacitors

Yarn-shaped supercapacitors (YSCs) once integrated into fabrics provide promising energy storage solutions to the increasing demand of wearable and portable electronics. In such device format, however, it is a challenge to achieve outstanding electrochemical performance without compromising flexibility. Here, MXene-based YSCs that exhibit both flexibility and superior energy storage performance by employing a biscrolling approach to create flexible yarns from highly delaminated and pseudocapacitive MXene sheets that are trapped within helical yarn corridors are reported. With specific capacitance and energy and power densities values exceeding those reported for any YSCs, this work illustrates that biscrolled MXene yarns can potentially provide the conformal energy solution for powering electronics beyond just the form factor of flexible YSCs.

Simultaneously 'pushing' and 'pulling' graphene oxide into low-polar solvents through a designed interface

Dispersing graphene oxide (GO) in low-polar solvents can realize a perfect self-assembly with functional molecules and application in removal of organic impurities that only dissolve in low-polar solvents. The surface chemistry of GO plays an important role in its dispersity in these solvents. The direct transfer of hydrophilic GO into low-polar solvents, however, has remained an experimental challenge. In this study, we design an interface to transfer GO by simultaneously 'pushing and pulling' the nanosheets into low-polar solvents. Our approach is outstanding due to the ability to obtain monolayers of chemically reduced GO (CRGO) with designed surface properties in the organic phase. Using the transferred GO or CRGO dispersions, we have fabricated GO/fullerene nanocomposites and assessed the ability of CRGOs for dye adsorption. We hope our work can provide a universal approach for the phase transfer of other nanomaterials.

Data on kilometer scale production of stretchable conductive multifilaments enables knitting wearable strain sensing textiles

This data article contains analyzed data for the article “Continuous Production of Stretchable Conductive Multifilaments in Kilometer Scale Enables Facile Knitting of Wearable Strain Sensing Textiles” (Seyedin et al., 2018) [1]. Details of wet-spinning conditions to achieve scaled-up production of stretchable and conducting polyurethane/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PU/PEDOT:PSS) multifilaments are provided. The stress-strain curves for tensile and stretch-relaxation tests on the multifilament and different knitted textile structures (plain-knit, co-knit, co-knit-alternate, co-knit with conductive stitch, and plain with non-conductive stitch) are presented. It is shown that the PU/PEDOT:PSS multifilaments can also be knitted into fabrics that when worn on various body parts, such as knee, elbow, and finger, can monitor their various movements.

MXene: a potential candidate for yarn supercapacitors

The increasing developments in wearable electronics demand compatible power sources such as yarn supercapacitors (YSCs) that can effectively perform in a limited footprint. MXene nanosheets, which have been recently shown in the literature to possess ultra-high volumetric capacitance, were used in this study for the fabrication of YSCs in order to identify their potential merit and performance in YSCs. With the aid of a conductive binder (PEDOT-PSS), YSCs with high mass loading of MXene are demonstrated. These MXene-based YSCs exhibit excellent device performance and stability even under bending and twisting. This study demonstrates that MXene is a promising candidate for YSCs and its further development can lead to flexible power sources with sufficient performance for powering miniaturized and/or wearable electronics.

Multifunctional, biocompatible and pH-responsive carbon nanotube- and graphene oxide/tectomer hybrid composites and coatings

Here we present a route for non-covalent functionalization of carboxylated multi-walled carbon nanotubes and graphene oxide with novel two-dimensional peptide assemblies. We show that self-assembled amino-terminated biantennary and tetraantennary oligoglycine peptides (referred to as tectomers) effectively coat carboxylated multi-walled carbon nanotubes and also strongly interact with graphene oxide due to electrostatic interactions and hydrogen bonding as the driving force, respectively. The resulting hybrids can be made into free-standing conducting composites or applied in the form of thin, pH-switchable bioadhesive coatings onto graphene oxide fibers. Monitoring of cell viability of pancreatic cell lines, seeded on those CNT hybrids, show that they can be used as two- and three-dimensional scaffolds to tissue engineer tumour models for studying ex vivo the tumour development and response to treatment. This highly versatile method in producing pH-responsive hybrids and coatings offers an attractive platform for a variety of biomedical applications and for the development of functional materials such as smart textiles, sensors and bioelectronic devices.

High Power Density Electrochemical Thermocells for Inexpensively Harvesting Low-Grade Thermal Energy

Continuously operating thermo-electrochemical cells (thermocells) are of interest for harvesting low-grade waste thermal energy because of their potentially low cost compared with conventional thermoelectrics. Pt-free thermocells devised here provide an output power of 12 W m^-2 for an interelectrode temperature difference (ΔT) of 81 °C, which is sixfold higher power than previously reported for planar thermocells operating at ambient pressure.

Relationship between nanotopographical alignment and stem cell fate with live imaging and shape analysis

The topography of a biomaterial regulates cellular interactions and determine stem cell fate. A complete understanding of how topographical properties affect cell behavior will allow the rational design of material surfaces that elicit specified biological functions once placed in the body. To this end, we fabricate substrates with aligned or randomly organized fibrous nanostructured topographies. Culturing adipose-derived stem cells (ASCs), we explore the dynamic relationship between the alignment of topography, cell shape and cell differentiation to osteogenic and myogenic lineages. We show aligned topographies differentiate cells towards a satellite cell muscle progenitor state - a distinct cell myogenic lineage responsible for postnatal growth and repair of muscle. We analyze cell shape between the different topographies, using fluorescent time-lapse imaging over 21 days. In contrast to previous work, this allows the direct measurement of cell shape at a given time rather than defining the morphology of the underlying topography and neglecting cell shape. We report quantitative metrics of the time-based morphological behaviors of cell shape in response to differing topographies. This analysis offers insights into the relationship between topography, cell shape and cell differentiation. Cells differentiating towards a myogenic fate on aligned topographies adopt a characteristic elongated shape as well as the alignment of cells.

A New Raman Metric for the Characterisation of Graphene oxide and its Derivatives

Raman spectroscopy is among the primary techniques for the characterisation of graphene materials, as it provides insights into the quality of measured graphenes including their structure and conductivity as well as the presence of dopants. However, our ability to draw conclusions based on such spectra is limited by a lack of understanding regarding the origins of the peaks. Consequently, traditional characterisation techniques, which estimate the quality of the graphene material using the intensity ratio between the D and the G peaks, are unreliable for both GO and rGO. Herein we reanalyse the Raman spectra of graphenes and show that traditional methods rely upon an apparent G peak which is in fact a superposition of the G and D’ peaks. We use this understanding to develop a new Raman characterisation method for graphenes that considers the D’ peak by using its overtone the 2D’. We demonstrate the superiority and consistency of this method for calculating the oxygen content of graphenes, and use the relationship between the D’ peak and graphene quality to define three regimes. This has important implications for purification techniques because, once GO is reduced beyond a critical threshold, further reduction offers limited gain in conductivity.

A novel and facile approach to fabricate a conductive and biomimetic fibrous platform with sub-micron and micron features

A novel and facile method to fabricate a core–shell structure consisting of a conducting fiber core and an electrospun fiber shell is presented.

High-Performance Flexible All-Solid-State Supercapacitor from Large Free-Standing Graphene-PEDOT/PSS Films

Although great attention has been paid to wearable electronic devices in recent years, flexible lightweight batteries or supercapacitors with high performance are still not readily available due to the limitations of the flexible electrode inventory. In this work, highly flexible, bendable and conductive rGO-PEDOT/PSS films were prepared using a simple bar-coating method. The assembled device using rGO-PEDOT/PSS electrode could be bent and rolled up without any decrease in electrochemical performance. A relatively high areal capacitance of 448 mF cm⁻² was achieved at a scan rate of 10 mV s⁻¹ using the composite electrode with a high mass loading (8.49 mg cm⁻²), indicating the potential to be used in practical applications. To demonstrate this applicability, a roll-up supercapacitor device was constructed, which illustrated the operation of a green LED light for 20 seconds when fully charged.