Modulus-dependent macrophage adhesion and behavior

Macrophage attachment and activation to implanted materials is crucial in determining the extent of acute and chronic inflammation, and biomaterials degradation. In an effort to improve implant performance, considerable attention has centered on altering material surface chemistry to modulate macrophage behavior. In this work, the influence of the modulus of a material on the behavior of model macrophages (i.e., human promonocytic THP-1 cells) was investigated. We synthesized interpenetrating polymer network (IPN) coatings with varying moduli to test the hypothesis that lower moduli surfaces attenuate THP-1 cell attachment and activation. The surface chemistry and moduli of the IPN coatings were characterized using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), respectively. THP-1 cells preferentially attached to stiffer coatings of identical surface chemistry, confirming that fewer macrophages attach to lower moduli surfaces. The secretion of human TNF-alpha, IL-10, IL-8 and IL-1beta from THP-1 cells attached to the IPNs was measured to assess the concentration of both pro- and anti-inflammatory cytokines. The global amount of TNF-alpha released did not vary for IPN surfaces of different moduli; however, the amount of the pro-inflammatory cytokine IL-8 released demonstrated a biphasic response, where lower (approx. 1.4 kPa) and very high (approx. 348 kPa) moduli IPN surfaces attenuated IL-8 secretion. The different trends for TNF-alpha and IL-8 secretion highlight the complexity of the wound healing response, suggesting that there may not be a unique surface chemistry and substratum modulus combination that minimizes the pro-inflammatory cytokines produced by activated macrophages.

Endothelial cell function on a poly(acrylamide-co-polyethylene acid) interpenetrating polymer network: cardiovascular applications

Hydrogel coatings have been widely researched as a nonfouling surface modification of materials for cardiovascular applications. In this study, we examined cell-surface interactions between a poly(acrylamide-copolyethylene glycol/acrylic acid) interpenetrating network (IPN) hydrogel and aortic endothelial cells (ECs). The IPN was covalently attached to polystyrene to form a nanometer scale thick hydrogel, and the IPN layer was activated by conjugation of the cell adhesion peptide Arg-Gly-Asp (RGD). On IPN surfaces lacking the RGD peptide, EC did not adhere and spread even after long-term incubation. The IPN was able to support greater EC adhesion and spreading with increasing RGD surface concentrations. Upon adequate adhesion and spreading, ECs migrated and proliferated at high rates regardless of the RGD surface concentration. These results suggest that this IPN can be used to promote endothelialization of vascular implants made of polymeric and metal materials for cardiovascular applications.

Saline irrigation does not affect bone formation or fixation strength of hydroxyapatite/tricalcium phosphate-coated implants in a rat model

Intramembranous bone regeneration is critical to implant fixation. In cementless joint replacement (as opposed to cemented joint replacement), saline irrigation is not typically performed during surgery so that the osteogenic stimulus provided by the marrow is preserved. Several groups are now using the rat marrow ablation model to study intramembranous bone regeneration and implant fixation. In this model, the marrow contents are mechanically disrupted, and debris is often cleared by saline irrigation, a step that appears inconsistent with the clinical situation. Furthermore, in contrast to conventional wisdom, it has been reported that saline irrigation enhanced bone-implant contact and peri-implant bone formation in the rat model (Ishizaka et al. Bone 1996;19:589-594), although mechanical fixation of the implant was not investigated. Accordingly, the present study was performed to determine if saline irrigation leads to enhanced mechanical fixation of implants in the rat model. Forty-eight 400 to 450 g male rats were divided equally into two groups. The treatment group, in contrast to the control group, received saline irrigation in the ablated medullary canal prior to placement of hydroxyapatite/tricalcium phosphate-coated implants. Eight animals in each group were killed at 2, 4, or 8 weeks after implantation, at which time the specimens were analyzed by micro computed tomography to measure bone formation around the implant, followed by a mechanical pull-out test to measure the strength of fixation of the implant. As expected, there was increased fixation strength over time, but there were no significant differences in peri-implant bone volume, bone-implant contact, or implant fixation strength between the two groups. Thus, we found no effect of saline irrigation on bone formation or implant fixation strength in this study in which the implant had an osteoconductive coating.

Development and characterization of a high-throughput system for assessing cell-surface receptor-ligand engagement

A nonfouling interfacial interpenetrating polymer network (IPN) of poly(acrylamide-co-ethylene glycol/acrylic acid) [p(AAm-co-EG/AAc)] was grafted to polystyrene for use as a novel platform for the development of high-throughput assays for screening of specific bimolecular interactions (i.e., receptor-ligand engagement). For the development of the IPN, a water-soluble hydrogen-abstracting photoinitiator was investigated: (4-benzoylbenzyl)trimethylammonium chloride. IPN-modified polystyrene surfaces were characterized using XPS, contact angle goniometry, and protein adsorption analysis. These IPN surfaces minimized fibrinogen adsorption compared to tissue culture polystyrene (>96% reduction), prevented mammalian cell adhesion, and served as nonfouling surfaces to graft biological ligands. For bimolecular interaction studies, a model peptide ligand from bone sialoprotein (Ac-CGGNGEPRGDTYRAY-NH(2)) was grafted to p(AAm-co-EG/AAc) via a 3400 M(w) linear pEG spacer. Ligand density measurements, cell culture, and a centrifugal adhesion assay were used to study cell adhesion to peptide-modified IPNs (i.e., receptor-ligand engagement). Ligand density (Gamma) was controllable from approximately 1 to 20 pmol/cm(2) by modulating the peptide input concentration (0.02-20 microM). Cell adhesion was directly dependent on the ligand density. This technology creates a powerful high-throughput system to simultaneously probe a myriad of cell-surface receptor-ligand interactions.

Analysis of interpenetrating polymer networks via quartz crystal microbalance with dissipation monitoring

A quartz crystal microbalance with dissipation monitoring (QCM-D) was used to assess the physical properties of interpenetrating polymer networks (IPNs) through swelling experiments in ambient humidity and in phosphate-buffered saline (PBS), pH 7.4. The IPNs, based on acrylamide (AAm) and poly(ethylene glycol) (pEG), swell from thin, rigid films when dry (16.7 +/- 5.2 nm on Si/SiO(2)) to expanded, viscoelastic films when hydrated (107 +/- 24.2 nm on Si/SiO2). The dry IPNs could be analyzed using the Sauerbrey relationship, but for the hydrated films it was necessary to interpret QCM-D data with a Kelvin-Voigt viscoelastic model. A complex modulus |G| of 116 +/- 38.1 kPa for the swollen IPN surface on Si/SiO2 was defined by the model. The QCM-D was also employed to quantify the adsorption of human fibrinogen, a protein important in thrombus formation, onto the IPNs. Fibrinogen adsorption studies demonstrated the sensitivity of the QCM-D, as well as confirmed the nonfouling nature of the IPN surface, where less than 5 ng/cm2 of fibrinogen was adsorbed.

A low-temperature biomimetic calcium phosphate surface enhances early implant fixation in a rat model

The present study demonstrates increased early mechanical fixation of titanium implants coated with a new biomimetic apatite surface in a rat model. Male Sprague-Dawley rats received unilateral femoral medullary implants for periods of 1-4 weeks. The strength of fixation of the implant to the host bone increased more rapidly in the group receiving apatite-treated implants compared with the control group as evidenced by the apatite group's 21-fold greater fixation strength at 1 week (p = 0.009), 4-fold greater fixation strength at 2 weeks (p = 0.041), and 2-fold greater fixation strength at 4 weeks (p = 0.093) compared with the control. Fixation strength was correlated with bone-implant contact as determined from micro computed tomography assessment of the specimens (r2 = 0.338, p = 0.011 in the control group and r2 = 0.543, p < 0.001 in the apatite group). Furthermore, for a given amount of bone-implant contact, the fixation strength was higher in the apatite group than in the control group (p = 0.011), suggesting that the bone formed a stronger bond to the apatite coating than to the titanium. This difference in bonding strength accounted for the difference in mechanical behavior.

Thermo-responsive peptide-modified hydrogels for tissue regeneration

Loosely cross-linked hydrogels consisting of N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc) were synthesized, characterized, and used as model scaffolds for studying cell-material interactions in three-dimensions (3D). The AAc groups were functionalized with peptides containing the -RGD- and -FHRRIKA- sequences found in bone sialoprotein. Chemical modification of the hydrogels was verified via solid-state (1)H nuclear magnetic resonance spectroscopy, lower critical solution temperature studies, and volume change studies. The peptide-modified hydrogels were pliable at 22 degrees C and could be injected through a small-diameter aperture. Rat calvarial osteoblasts (RCO) seeded into the peptide-modified hydrogels were viable for at least 21 days of in vitro culture. The RCO spread more and demonstrated significantly greater proliferation when cultured within the peptide-modified hydrogels, as compared to control hydrogels. These peptide-modified P(NIPAAm-co-AAc) hydrogels serve as useful tools for studying cell-material interactions within 3D structures and have the potential to be used as injectable scaffolds for tissue engineering applications.

A system to impose prescribed homogenous strains on cultured cells

There is presently significant interest in cellular responses to physical forces, and numerous devices have been developed to apply stretch to cultured cells. Many of the early devices were limited by the heterogeneity of deformation of cells in different locations and by the high degree of anisotropy at a particular location. We have therefore developed a system to impose cyclic, large-strain, homogeneous stretch on a multiwell surface-treated silicone elastomer substrate plated with pulmonary epithelial cells. The pneumatically driven mechanism consists of four plates each with a clamp to fix one edge of the cruciform elastomer substrate. Four linear bearings set at predetermined angles between the plates ensure a constant ratio of principal strains throughout the stretch cycle. We present the design of the device and membrane shape, the surface modifications of the membrane to promote cell adhesion, predicted and experimental measurements of the strain field, and new data using cultured airway epithelial cells. We present for the first time the relationship between the magnitude of cyclic mechanical strain and the extent of wound closure and cell spreading.

Specific amelogenin gene splice products have signaling effects on cells in culture and in implants in vivo

Low molecular mass amelogenin-related polypeptides extracted from mineralized dentin have the ability to affect the differentiation pathway of embryonic muscle fibroblasts in culture and lead to the formation of mineralized matrix in in vivo implants. The objective of the present study was to determine whether the bioactive peptides could have been amelogenin protein degradation products or specific amelogenin gene splice products. Thus, the splice products were prepared, and their activities were determined in vitro and in vivo. A rat incisor tooth odontoblast pulp cDNA library was screened using probes based on the peptide amino acid sequencing data. Two specific cDNAs comprised from amelogenin gene exons 2,3,4,5,6d,7 and 2,3,5,6d, 7 were identified. The corresponding recombinant proteins, designated r[A+4] (8.1 kDa) and r[A-4] (6.9 kDa), were produced. Both peptides enhanced in vitro sulfate incorporation into proteoglycan, the induction of type II collagen, and Sox9 or Cbfa1 mRNA expression. In vivo implant assays demonstrated implant mineralization accompanied by vascularization and the presence of the bone matrix proteins, BSP and BAG-75. We postulate that during tooth development these specific amelogenin gene splice products, [A+4] and [A-4], may have a role in preodontoblast maturation. The [A+4] and [A-4] may thus be tissue-specific epithelial mesenchymal signaling molecules.

The effect of peptide surface density on mineralization of a matrix deposited by osteogenic cells

The density of Arg-Gly-Asp-containing peptides covalently grafted to solid materials has been shown to affect adhesion, spreading, and focal contact formation. The objective of this study was to examine the effect of ligand density on mineralization of the extracellular matrix deposited by osteoblasts. In particular, RGD-modified quartz surfaces with ligand densities varying over two orders (0.01-3.6 pmol/cm(2)) of magnitude were prepared to assess the long-term function of osteoblasts on peptide-derivatized surfaces. After 3 weeks in culture, surfaces modified with a 15 amino acid peptide (Ac-Cys-Gly-Gly-Asn-Gly-Glu-Pro-Arg-Gly-Asp-Thr-Tyr-Arg-Ala-Tyr-NH(2) ) at a density > or =0.62 pmol/cm(2) significantly (p<0.05) enhanced mineralization compared with a RGD surface density of 0.01 pmol/cm(2), RGE surfaces, or clean surfaces adsorbed with serum proteins. These results suggest that regulation of the surface density of adhesive ligands on biomaterial surfaces is a critical determinant in a strategy to alter the degree of extracellular matrix maturation in contact with solid surfaces (e.g., implants). Further studies are required to elucidate the intracellular signal transduction pathways that mediate long-term matrix mineralization through the initial engagement of these adhesive ligands.

A biodegradable polymer scaffold for delivery of osteotropic factors

Despite discoveries and developments in osteotropic factors, therapies exploiting these macromolecules have been limited due to a lack of suitable delivery vehicles and three dimensional (3D) scaffolds that promote bone regeneration. To address this limitation, an emulsion freeze-drying process was developed to fabricate biodegradable scaffolds with controlled microarchitecture, and the ability to incorporate and deliver bioactive macromolecules for bone regeneration. The effect of median pore size and protein loading on protein release kinetics was investigated using scaffolds with different protein loading and median pore sizes ranging from 7 to 70 microm. Graphs of protein release from scaffolds showed an initial burst followed by a slower sustained release. Release kinetics were characterized using an unsteady-state, diffusion-controlled model with an effective diffusivity that took tortuosity (tau) and partition coefficient for protein adsorption (Kp) onto the scaffold walls into account. Tortuosity and partition coefficient significantly reduced the protein diffusivity by a factor of 41 +/- 43 and 105 +/- 51 for 60 and 30-microm median pore-sized scaffolds, respectively. The activity of the protein released from these scaffolds was demonstrated by delivering rhBMP 2 and [A-4] (an amelogenin derived polypeptide) proteins from the scaffold and regenerating bone in a rat ectopic bone induction assay [Whang et al. J Biomed Mater Res 1998;42:491-9, Veis et al. J Bone Mineral Res, Submitted].

Surface modification of poly(ethylene terephthalate) angioplasty balloons with a hydrophilic poly(acrylamide-co-ethylene glycol) interpenetrating polymer network coating

An interpenetrating polymer network (IPN) of poly(acrylamide-co-ethylene glycol) (p(AAm-co-EG)) hydrogel was covalently grafted to polyethylene terephthalate (PET) angioplasty balloons to increase surface hydrophilicity and improve lubricity. A 2-step graft polymerization protocol was followed to first polymerize and cross-link acrylamide onto the substrate with a photosensitizer and/or oxygen plasma pretreatment. The effects of varying photo-initiation and plasma exposure times were investigated separately and conjunctively using water contact angles to obtain optimal coating deposition parameters. A poly(ethylene glycol) network was then grafted by swelling the preexisting polyacrylamide network to allow inter-diffusion of the monomer and cross-linker, which were then polymerized by photo-initiation. When the photo-initiation time was long enough to reach near gelation, pretreatment of PET with oxygen plasma did not offer significant benefit. X-ray photoelectron spectroscopy confirmed the presence of both polymer layers, and composition depth profiles supported the assessment that an interpenetrating network was formed. Tensile testing and application of Weibull statistics on unmodified and modified films indicated that the surface modification approach did not significantly alter the mechanical integrity of the material. These findings indicate that a p(AAm-co-EG) coating can be effectively deposited on PET surfaces without compromising the structural integrity of the substrate.

Quantification of the surface density of a fluorescent label with the optical microscope

Fluorescence microscopy can offer unique advantages for biomaterials characterization. Like spectroscopy or radioactivity, it can be used to quantify specific binding to surfaces, but it can also assess surface homogeneity at the micron scale or detect protein aggregation. To fully utilize the potential of this technique, there must be a way to calibrate the microscope in terms of the moles of a fluorophore per unit area. The method we propose involves the following steps: fluorescent labeling of erythrocytes and quantification of the label by flow cytometry; flattening of fluorescent erythrocytes for microscopic observation; imaging and digital analysis to relate the gray level intensities to the fluorophore density; and using this procedure to characterize a different, more easily obtainable, standard. The latter can be a 50% solution of Na fluorescein that yields a highly reproducible and uniform fluorescence. Concentrated fluorescein solution can also be used to correct images for the spatial nonuniformity of illumination and detection (shading correction). By applying this method to study the binding of IgG and fibrinogen to glass or amidated glass, we showed that protein adsorption to glass may result in protein aggregation that may affect the biological activity of the adsorbed protein.

Protein adsorption and cell attachment to patterned surfaces

To better understand the events involved in the generation of defined tissue architectures on biomaterials, we have examined the mechanism of attachment of human bone-derived cells (HBDC) to surfaces with patterned surface chemistry in vitro. Photolithography was used to generate alternating domains of N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS) and dimethyldichlorosilane (DMS). At 90 min after seeding, HBDC were localized preferentially to the EDS regions of the pattern. Using sera specifically depleted of adhesive glycoproteins, this spatial organization was found to be mediated by adsorption of vitronectin (Vn) from serum onto the EDS domains. In contrast, fibronectin (Fn) was unable to adsorb in the face of competition from other serum components. These results were confirmed by immunostaining, which also revealed that both Vn and Fn were able to adsorb to EDS and DMS regions when coated from pure solution, i.e., in the absence of competition. In this situation, each protein was able to mediate cell adhesion across a range of surface densities. Cell spreading was constrained on the EDS domains, as indicated by cell morphology and the lack of integrin receptor clustering and focal adhesion formation. This spatial constraint may have implications for the subsequent expression of differentiated function.

Integrin subunits responsible for adhesion of human osteoblast-like cells to biomimetic peptide surfaces

We have identified the integrin subunits responsible for the initial adhesion of human osteoblast-like cells to peptide-modified surfaces. Biomimetic peptide surfaces containing homogenous RGD (Arg-Gly-Asp), homogenous FHRRIKA (Phe-His-Arg-Arg-Ile-Lys-Ala), and a mixed ratio of FHRRIKA:RGD (25:75) were used to assess integrin-mediated adhesion. The RGD and FHRRIKA peptides were selected from the cell-binding and putative heparin-binding domains of bone sialoprotein. A panel of monoclonal antibodies against human alpha1, alpha2, alpha3, alpha4, alpha5, beta1, alpha(v), and alpha(v)beta3 was used to identify the subunits most dominant in mediating short-term (10 or 30 minutes) and long-term (4 hours) cell adhesion to the peptide surfaces. Anti-alpha2, anti-beta1, and anti-alpha(v) significantly (p < 0.05) diminished cell attachment to homogenous RGD surfaces following 30 minutes of incubation. After 4 hours of incubation on RGD-grafted surfaces, immunostaining of these integrin subunits revealed discrete localization of the alpha(v) subunit at the periphery of the cell (similar to focal contact points), whereas the alpha2 and beta1 subunits stained very diffusely throughout the cell. A radial-flow apparatus was used to determine the effect of anti-integrin antibodies on strength of cell detachment following 10 minutes of incubation on peptide-grafted surfaces. The strength of detachment from surfaces containing RGD was significantly reduced (p < 0.05) in the presence of anti-alpha2, anti-alpha(v), or anti-beta1 compared with controls (presence of preimmune mouse IgG). None of the antibodies significantly influenced cell attachment to homogenous FHRRIKA-grafted surfaces. These results demonstrate that initial (30 minutes) attachment of human osteoblast-like cells to homogenous RGD surfaces was mediated by the collagen receptor alpha2beta1 and the vitronectin receptor alpha(v)beta3, whereas only the vitronectin receptor governed longer term (longer than 30 minutes) adhesion (localization to focal contacts). The importance of distinct integrins in mediating the attachment of bone cells to RGD-immobilized surfaces indicates a strategy for engineering orthopaedic implants with a built-in surface specificity for cell adhesion.

Designing biomaterials to direct biological responses

We have set forth a design strategy for creating biomimetic materials that direct the formation of tissue surrounding implants or regeneration within porous scaffolds. Our studies have established that heterogeneous mimetic peptide surfaces (MPS) containing both the -RGD- (cell-binding) and-FHRRIKA- (putative heparin-binding) peptides, unique to BSP, in the ratio of 75:25 (MPS II) or 50:50 (MPS III) proved to be more biologically relevant and specific for RCO cell function. The initial response of human osteoblast-like cells to these surfaces was mediated by the collagen (alpha 2 beta 1) and vitronectin receptors (alpha v beta 3), whereas the vitronectin receptor alone dominated longer-term events (> 30 min). MPS II and III surfaces enhanced cell spreading and long-term events such as mineralization of the extracellular matrix compared to homogenous peptide surfaces and controls. Furthermore, extensive mineralization of the ECM deposited by RCOs occurred when the peptide was coupled to an interfacial interpenetrating polymer network (IPN) that resisted protein deposition (i.e., non-specific adsorption) and fouling. Work on thermo-reversible P(NIPAAm-co-AAc) hydrogels demonstrated the ability to create materials that can be delivered to the body in a minimally invasive manner and support tissue regeneration. These hydrogels can be modified to incorporate biofunctional components such as the biomimetic peptides, theoretically enhancing their ability to foster tissue regeneration. These results suggest that biomaterials can be engineered to mimic ECM components of bone (e.g., various organs) by grafting peptides in the appropriate ratios of the cell and heparin-binding domains, and ultimately modulate the expression of the osteoblast cell phenotype. Approaches similar to the one presented in this work can be used to design materials for hybrid artificial organs and other tissues.

Optimization of the cost and sensitivity of receptor- and enzyme-based assays

In detecting receptor antagonists or enzyme inhibitors, there are three parameters that often affect the outcome in a predictable quantitative manner: concentrations of the receptors (enzyme), labeled ligand (substrate), and antagonist (inhibitor). The usual goal of assay optimization is to maximize the ability of the assay to detect low concentrations of the analyte. Another question of practical importance, especially in screening of large numbers of samples, would be minimization of the reagent cost. Although the mathematical theory of optimization of the receptor binding assay was developed a long time ago, the resulting formulas (in the general case of unequal affinities of ligand and competitor) were not well suited for practical use. The current availability of computational programs, such as Mathematica, makes possible an efficient solution, both for receptor- and enzyme-based assays. We use a graphical approach to assay optimization and apply it to the following problems: (1) optimization of assay sensitivity, (2) optimization of the reagent cost, and (3) analysis of the entire range of the parameter values since the mathematically optimal values may sometimes be impractical. The computation is extremely simple and the problem can sometimes be solved in several minutes.

Surfaces designed to control the projected area and shape of individual cells

Materials with spatially resolved surface chemistry were designed to isolate individual mammalian cells to determine the influence of projected area on specific cell functions (e.g., proliferation, cytoskeletal organization). Surfaces were fabricated using a photolithographic process resulting in islands of cell binding N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS) separated by a nonadhesive interpenetrating polymer network [poly (acrylamide-co-ethylene glycol); P (AAm-co-EG)]. The surfaces contained over 3800 adhesive islands/cm2, allowing for isolation of single cells with projected areas ranging from 100 microns 2 to 10,000 microns 2. These surfaces provide a useful tool for researching how cell morphology and mechanical forces affect cell function.

Engineering bone regeneration with bioabsorbable scaffolds with novel microarchitecture

Critical-sized defects (CSDs) were introduced into rat calvaria to test the hypothesis that absorption of surrounding blood, marrow, and fluid from the osseous wound into a bioabsorbable polymer matrix with unique microarchitecture can induce bone formation via hematoma stabilization. Scaffolds with 90% porosity, specific surface areas of approximately 10 m2/g, and median pore sizes of 16 and 32 microm, respectively, were fabricated using an emulsion freeze-drying process. Contact radiography and radiomorphometry revealed the size of the initial defects (50 mm2) were reduced to 27 +/- 11 mm2 and 34 +/- 17 mm2 for CSDs treated with poly(D,L-lactide-co-glycolide). Histology and histomorphometry revealed scaffolds filled with significantly more de novo bone than negative controls (p < 0. 007), more osteoid than both the negative and autograft controls (p < 0.002), and small masses of mineralized tissue (< 15 mm in diameter) observed within the scaffolds. Based on these findings, we propose a change in the current paradigm regarding the microarchitecture of scaffolds for in vivo bone regeneration to include mechanisms based on hematoma stabilization.

Biomimetic peptide surfaces that regulate adhesion, spreading, cytoskeletal organization, and mineralization of the matrix deposited by osteoblast-like cells

In an effort to regulate mammalian cell behavior in contact with solid material surfaces, we have functionalized surfaces with different ratios of both the putative cell binding (-Arg-Gly-Asp-) domain and a consensus heparan-binding domain. The peptide sequences -Arg-Gly-Asp- (-RGD-) and -Phe-His-Arg-Arg-Ile-Lys-Ala- (-FHRRIKA-) or mixtures of the two in the ratios of 75:25 (mimetic peptide surface I), 25:75 (mimetic peptide surface II), and 50:50 (mimetic peptide surface III) were immobilized on model surfaces using a heterobifunctional cross-linker to link the peptide(s) to amine-functionalized quartz surfaces. Contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy were used to confirm the chemistry, thickness of the overlayers, and surface density of immobilized peptides ( approximately 4-6 pmol/cm2). The degree of rat calvaria osteoblast-like cell spreading, focal contact formation, cytoskeletal organization, proliferation, and mineralization of the extracellular matrix (ECM) on model biomaterial surfaces was examined. Mimetic peptide surface II (MPS II) and MPS III supported the highest degree of cell spreading (p < 0.05), following 4 h of incubation, compared to MPS I, homogeneous -RGD-, and homogeneous -FHRRIKA- grafted surfaces. Furthermore, MPS I, MPS II, MPS III, and homogeneous -RGD- surfaces promoted the formation of focal contacts and stress fibers by attached bone cells. The strength of bone cell detachment following 30 min of incubation was significantly higher (p < 0.05) on MPS II surfaces compared to homogeneous -RGD- and -FHRRIKA-. However, the degree of cell proliferation on the peptide surfaces were not significantly different from each other (p > 0.1). Following 24 d in culture, the areas of mineralized ECM formed on MPS II and MPS III surfaces were significantly (p < 0.05) larger than those of other surfaces. These results demonstrate that utilizing peptide sequences incorporating both cell- and heparin-adhesive motifs can enhance the degree of cell surface interactions and influence the long-term formation of mineralized ECM in vitro.

Ectopic bone formation via rhBMP-2 delivery from porous bioabsorbable polymer scaffolds

Drug delivery devices have received considerable interest in the field of tissue engineering due to the advent of proteins that can induce proliferation and differentiation of various cells to form specific tissues and organs, for example, bone morphogenetic protein (BMP-2) for osteogenesis. In this work the delivery of a clinically relevant bioactive factor, recombinant human rhBMP-2, was tested in vivo in a rat ectopic bone induction assay. Contact radiography and radiomorphometry showed significantly more radiopacity (1798+/-183 mm2 versus. 784+/-570 mm2 radiopaque area/g scaffold) in the BMP scaffolds than controls (p < 0.002). De novo woven bone and abundant osteoid formation were confirmed from histological sections while controls contained minimal amounts of tissue. Histomorphometry revealed significantly more bone (124+/-93 mm2 versus 7+/-12 mm2) and osteoid (72+/-43 mm2 versus 20+/-21 mm2) in the BMP implants (p < 0.001). These scaffolds demonstrated the ability to deliver viable rhBMP-2 and to induce bone formation in an ectopic site.

Biomolecular modification of p(AAm-co-EG/AA) IPNs supports osteoblast adhesion and phenotypic expression

Interpenetrating polymer networks (IPNs) were designed to resist materials fouling caused by non-specific protein adsorption, and indiscriminate cell or bacterial adhesion. These IPNs were thin adherent films (approximately 20 nm) comprised of acrylamide (AAm), ethylene glycol (EG), and acrylic acid (AA) grafted to either silicon waters or quartz substrates via photoinitiated free radical polymerization. These networks were further modified to promote specific cell adhesion by tethering bioactive groups such as peptides that mimic cell-binding domains found on extracellular matrix molecules. As a specific example of biomolecular surface engineering, peptides from the cell-binding domain of bone sialoprotein were tethered to a p(AAm-co-EG/AA) IPN to control cell behavior at the surface. The networks were characterized by contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy to convey information on IPN wettability, thickness, and chemistry. The surface characterization data supported the theory that the PEG/AA layer formed an IPN with the underlying p(AAm) network, and after graft modification of this IPN with diamino PEG (PEG(NH2)2), the PEG(NH2)2 chains were enriched at the surface. Rat calvarial osteoblasts attached to Arg-Gly-Asp (RGD) modified IPNs at levels significantly greater than on clean quartz, Arg-Gly-Glu (RGE) modified, or the PEG(NH2)2 modified IPN, with or without serum in the media. Cells maintained in media containing 15% fetal bovine serum (FBS) proliferated, exhibited nodule formation, and generated sheets of mineralized extracellular matrix (ECM) with the addition on beta-glycerophosphate to the media. Cell adhesion and mineralized ECM formation were specifically dependent on the peptide sequence present at the surface.

The role of vitronectin in the attachment and spatial distribution of bone-derived cells on materials with patterned surface chemistry

In recent years a central objective of tissue engineering has been understanding the interaction of cells with biomaterial surfaces. In this study we examined the protein adsorption events necessary to control the attachment and the subsequent spatial distribution of bone-derived cells exposed to chemically modified surfaces. Silane chemistry and photolithography techniques were used to create substrates with alternating regions of an aminosilane, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS), along side an alkylsilane, dimethyldichlorosilane (DMS), on quartz surfaces. Sera depleted of fibronectin (Fn), vitronectin (Vn), or both were used to determine if these proteins were necessary for the initial attachment and spatial distribution of bone-derived cells exposed to modified surfaces in vitro. The kinetics and mechanisms of the spatial distribution of cells were examined using light microscopy and digital image acquisition and subsequently were analyzed. Compared to complete serum, the use of serum depleted of fibronectin with vitronectin included had minimal effect on the cell attachment, spreading, and spatial distribution on the EDS regions of the surface. However, the use of serum depleted of vitronectin with or without fibronectin included resulted in greatly reduced cell attachment and spreading. Thus the presence of vitronectin was required for the attachment, spreading, and spatial distribution of bone-derived cells exposed to EDS/DMS-patterned surfaces.

The role of vitronectin in the attachment and spatial distribution of bone-derived cells on materials with patterned surface chemistry

In recent years a central objective of tissue engineering has been understanding the interaction of cells with biomaterial surfaces. In this study we examined the protein adsorption events necessary to control the attachment and the subsequent spatial distribution of bone-derived cells exposed to chemically modified surfaces. Silane chemistry and photolithography techniques were used to create substrates with alternating regions of an aminosilane, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS), along side an alkylsilane, dimethyldichlorosilane (DMS), on quartz surfaces. Sera depleted of fibronectin (Fn), vitronectin (Vn), or both were used to determine if these proteins were necessary for the initial attachment and spatial distribution of bone-derived cells exposed to modified surfaces in vitro. The kinetics and mechanisms of the spatial distribution of cells were examined using light microscopy and digital image acquisition and subsequently were analyzed. Compared to complete serum, the use of serum depleted of fibronectin with vitronectin included had minimal effect on the cell attachment, spreading, and spatial distribution on the EDS regions of the surface. However, the use of serum depleted of vitronectin with or without fibronectin included resulted in greatly reduced cell attachment and spreading. Thus the presence of vitronectin was required for the attachment, spreading, and spatial distribution of bone-derived cells exposed to EDS/DMS-patterned surfaces.

The detachment strength and morphology of bone cells contacting materials modified with a peptide sequence found within bone sialoprotein

Adhesion, spreading, and focal contact formation of primary bone-derived cells on quartz surfaces grafted with a 15 amino acid peptide that contained a -RGD-(-Arg-Gly-Asp-) sequence unique to bone sialoprotein was investigated. The peptide surfaces were fabricated by using a heterbifunctional crosslinker, sulfosuccinimidyal 4-(N-maleimidomethyl)cyclohexane-1-carboxylate, to link the peptide to amine functionalized quartz surfaces. Contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy were used to confirm the chemistry and thickness of the overlayers. A radial flow apparatus was used to characterize cell detachment from peptide-grafted surfaces. After 20 min of cell incubation, the strength of cell adhesion was significantly (p < 0.05) higher on the -RGD- compared to -RGE- (control) surfaces. Furthermore, the mean area of cells contacting the -RGD- was significantly (p < 0.05) higher than -RGE- surfaces. Vinculin staining showed formation of small focal contact patches on the periphery of bone cells incubated for 2 h on the -RGD- surfaces; however, few or no focal contacts were formed by cells seeded on the -RGE-grafted surfaces. The methods of peptide immobilization utilized in this study can be applied to implants, biosensors, and diagnostic devices that require specificity in cell adhesion.

A probabilistic approach to measure the strength of bone cell adhesion to chemically modified surfaces

Patterned surfaces with alternating regions of amino silanes [N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS)] and alkyl silanes [dimethyldichlorosilane (DMS)] have been used to alter the kinetics of spatial distribution of cells in vitro. In particular, we have previously observed the preferential spatial distribution of bone cells on the EDS regions of EDS/ DMS patterned surfaces (10). In this study, we examined whether the mechanism of spatial distribution of cells on the EDS regions was adhesion mediated. Homogeneous layers of EDS and DMS were immobilized on quartz substrates and characterized by contact angle. X-ray photoelectron spectroscopy, and spectroscopic ellipsometry. The strength of bone cell attachment to the modified substrates was examined using a radial flow apparatus, within either 20 min or 2 hr of cell incubation in the presence of serum. A Weibull distribution was chosen to characterize the strength of cell-substratum adhesion. Within 20 min of cell exposure, the strength of adhesion was significantly larger on EDS and clean surfaces, compared with DMS surfaces (p < 0.001). Within 2 hr of cell incubation, there was no statistical difference between the strength of cell adhesion to EDS, DMS, and clean surfaces. The results of this study suggest that the surface chemistry mediates adhesion-based spatial cell arrangement through a layer of adsorbed serum proteins.

Kinetics of bone cell organization and mineralization on materials with patterned surface chemistry

Materials with spatially resolved chemistries (i.e. patterned surfaces) have been used to guide and organize the position of mammalian cells in vitro. A common theme in guiding the spatial distribution of cells has been the use of patterned alkylsiloxanes, where one region contains an aminosilane and the other an alkylsilane. The regions of the aminosilane served as preferential sites for cell attachment and spreading, presumably dependent on the association between cell surface proteoglycans the positively charged amine. In this study, experiments were conducted with patterns of N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS) and dimethyldichlorosilane (DMS) to determine the kinetics of spatial organization of bone-derived cells, and whether initial attachment and spreading affected the rate of matrix mineralization (i.e. bone formation) in extended cultures. The bone cells required the presence of serum or preadsorption of serum proteins to the patterned EDS/DMS surface to organize according to the lithographically defined surface chemistry. Time-lapse video microscopy indicated that cells were randomly distributed over the EDS/DMS surface at the time of plating, but organized on the EDS regions within 30 min. When cultures were extended for 15 and 25 days, the matrix synthesized by the cells was preferentially mineralized on the EDS chemistry. These results demonstrate the ability of surface chemistry modifications to organize cells and form mineralized tissue in vitro. The methods employed should have general value to the engineering of tissues in vitro.

A versatile technique for patterning biomolecules onto glass coverslips

A fast, inexpensive, and versatile technique for patterning the surface of glass coverslips with molecules of biological interest is described. The technique combines photolithographic, silane-coupling, and protein adsorption procedures to pattern coverslips with amines, alkanes, and proteins with micrometer spatial resolution. The attachment of amines and alkanes was verified using contact angle and X-ray photoelectron spectroscopic (XPS) measurements. XPS results showed that amines and alkanes were attached in 1-4 nm thickness covering approximately 20% and 45%, respectively, of the surface. Patterns of amines were visualized using fluorescent staining, and patterns of proteins were detected immunochemically. Patterned coverslips were used to investigate adhesion and neurite outgrowth of mouse neuroblastoma (N1E-115) cells. Cells were examined on the following patterns: alkane-glass, protein-glass, amine-alkane, and amine-protein. Cell attachment and neurite outgrowth on patterned coverslips displayed the following preferences: laminin, fibronectin, or collagen IV > amine or glass > alkane or bovine serum albumin. This patterning method should be useful for studies of cell-surface interactions, cell migration, nerve regeneration, and the formation of neural networks in vitro.

The mechanisms of passive dissolution of titanium in a model physiological environment

The surface chemistry, oxidation, and disolution kinetics of titanium were measured to establish the mechanisms of passive dissolution in physiological environments. Titanium thin films were immersed in 8.0 mM ethylenediamine-tetraacetic acid in simulated interstitial electrolyte (EDTA/SIE) and maintained at 37 degrees C, 10% O2, 5% CO2 and 7.2 pH for periods of time up to 3200 h (133 days). Two immersion schemes were employed: the integral sequentially determined the titanium released into a solution of accumulated dissolution products; and the differential continuously replenished the test solution. The solutions were analyzed for titanium by electrothermal atomic absorption spectrometry (EAAS), and the sample surfaces were analyzed by Auger electron spectroscopy (AES) and x-ray photoelectron spectroscopy (XPS) to determine oxide composition, stoichiometry, and thickness. Prior to immersion two types of hydroxyl (OH) groups were distinguished on the TiO2 surface. Upon immersion, the chemistry of the surface changed as a function of immersion: the presence of OH groups increased and P (nonelemental) was detected at the surface. The dissolution kinetics obeyed a two-phase logarithmic model, where the transition between phases occurred simultaneously with the adsorption of the P-containing species. The dissolution kinetics depended on surface reactions, electric field strength, and molecular diffusion. These mechanisms explain the observed dependence of dissolution kinetics on the properties of the surface oxide and solution ligands.

Hydration and preferential molecular adsorption on titanium in vitro

Surface sensitive spectroscopies, Auger electron and X-ray photoelectron (XPS), were used to determine changes in titanium oxide composition, oxide stoichiometry, and adsorbed surface species as a function of exposure to human serum in a balanced electrolyte (serum/SIE) and 8.0 mM ethylenediaminetetraacetic acid in a balanced electrolyte (EDTA/SIE) at 37 degrees C. Before immersion, the oxide was near ideal TiO2, covered by two types of hydroxyl groups: acidic OH(s) with oxygens doubly coordinated to titanium, and basic Ti-OH groups singly coordinated. After extended exposure to both solutions, up to 5000 h (ca. 208 d), the surface concentration of OH groups increased and non-elemental P appeared. The P LVV Auger transition and P 2p spectra indicated the peak positions were similar to reference phosphate compounds. The adsorbed phosphate species were presumed to be either Ti-H2PO4 or Ti-HPO4-. The XPS data suggested that a lipoprotein and/or glycolipid film was adsorbed to the specimens exposed to serum/SIE. Analysis of the preferential lipoprotein/glycolipid adsorption using electrostatic bonding concepts contributed to the refinement of the hierarchical model for the Ti-tissue interface. The salient features are that Ti metal is not in direct contact with the biological milieu, rather there is a gradual transition from the bulk metal, near-stoichiometric oxide, Ca and P substituted hydrated oxide, adsorbed lipoproteins and glycolipids, proteoglycans, collagen filaments and bundles to cells.

A physical model for the titanium-tissue interface

X-ray photoelectron spectroscopy (XPS) was used to determine changes in titanium oxide composition, oxide stoichiometry, and adsorbed surface species as a function of exposure to model physiologic environments. The oxide on titanium became heterogeneous and polarized as a function of exposure. Changes included an increase in surface hydroxyl groups, and adsorption of H2PO4- and HPO4(2-). The heterogeneous nature of the surface led to preferential adsorption of lipoproteins, glycolipids, or both from serum.

The effect of plasma-sprayed calcium phosphate ceramic coatings on the metal ion release from porous titanium and cobalt-chromium alloys

Bone tissue ingrowth in porous materials is enhanced by the deposition of bioactive calcium phosphate ceramic linings onto the pore walls. These bioactive coatings can be deposited using several methods which yield a variety of coating efficiencies and thereby influence the mechanisms and kinetics of ion release from the metal. We analyzed the effect of plasma-spraying hydroxyapatite onto titanium and cobalt-chromium alloys by measuring the release of Ti, Al, V, Co, and Cr in vitro. Plasma-sprayed coatings significantly reduced the Ti and Al release from titanium-based alloy specimens. The tendencies of release from the cobalt-based specimens are less pronounced. The data substantiate that neither localized enhanced passive dissolution of metal ions nor ceramic shielding of the metal occurs. The Scanning Auger Electron Microprobe Spectroscopic data suggest that the dissipation of thermal and kinetic energy of the ceramic particle at the time of impact can produce compositional and structural changes in the metal surfaces. The resulting effects are significant for the titanium alloy but less significant for the Co-Cr alloy system.