Complete mitochondrial genome of the composting worm Dendrobaena veneta (Clitellata: Oligochaeta, Lumbricidae)

Dendrobaena veneta (Rosa, 1886) is widely distributed all over Europe due to its use as compost worm. The specimen presented here was collected in Tiranë district, Albania. Currently, only two species' complete or nearly complete mitochondrial genome (mitogenome) sequences have been reported in the genus Dendrobaena; D. octaedra (Savigny, 1826) and D. tellermanica Perel, 1966. In this study, the complete mitogenome of D. veneta was sequenced, assembled, and annotated. The mitogenome of D. veneta is a circular DNA molecule, consisting of 15,475 bp with an A + T content of 61.2%. It contains 13 protein-coding genes, 2 ribosomal RNA genes, 22 transfer RNA genes, and 1 non-coding region (control region). Phylogenetic analysis showed that D. veneta is clustered with the other two Dendrobaena species in the well-supported family Lumbricidae.

Effects of a blend of garlic oil, nitrate and fumarate on in vitro ruminal fermentation and microbial population

Although garlic oil and nitrate can effectively suppress ruminal methane (CH₄ ) production in vitro, the application of these compounds is associated with suppressed total volatile fatty acid (VFA) concentration. On the other hand, the effectiveness of fumarate as a ruminal CH₄ mitigating agent is variable but its application increases total VFA concentration. We therefore hypothesized that the different characteristics of the compounds can compensate for the shortcomings of the other. The objective of this study was to develop an optimal blend of garlic oil, nitrate and fumarate that can suppress in vitro ruminal CH₄ without affecting total VFA concentration. Three ruminal in vitro fermentation experiments were carried out. The first one, a one factor at a time experiment was employed to investigate the effective concentration of each of the compounds on CH₄ and VFA production by ruminal bacteria. We then applied the fractional factorial design and response surface methodology in the second experiment to determine optimal concentrations of the compounds in the blend. The optimal blending of garlic oil, fumarate and nitrate was determined to be 50 mg/l, 15 mm and 20 mm, respectively. This simulated optimal blend was verified in a 48 h in vitro batch fermentation experiment. The blend achieved the intended goal of suppressing CH₄ whilst maintaining total VFA concentration. The blend and nitrate suppressed archaea populations (p < 0.001) but did not affect the total microbial population (p = 0.945). The observed results could be explained by additive effects of the agents making up the blend. Supplementing a high concentrate diet with the blend can significantly decrease ruminal CH₄ and maintain total VFAin vitro. These findings however, need to be verified in vivo using the optimized ratio of combining the three methane inhibitors as a guide.

Soluble Non-ammonia Nitrogen in Ruminal and Omasal Digesta of Korean Native Steers Supplemented with Soluble Proteins

An experiment was conducted to study the effect of soluble protein supplements on concentration of soluble non-ammonia nitrogen (SNAN) in the liquid phase of ruminal (RD) and omasal digesta (OD) of Korean native steers, and to investigate diurnal pattern in SNAN concentration in RD and OD. Three ruminally cannulated Korean native steers in a 3×3 Latin square design consumed a basal diet of rice straw and corn-based concentrate (control), and that supplemented (kg/d DM basis) with intact casein (0.24; IC) or acid hydrolyzed casein (0.46; AHC). Ruminal digesta was sampled using a vacuum pump, whereas OD was collected using an omasal sampling system at 2.0 h intervals after a morning feeding. The SNAN fractions (free amino acid (AA), peptide and soluble protein) in RD and OD were assessed using the ninhydrin assay. Concentrations of free AA and total SNAN in RD were significantly (p<0.05) lower than those in OD. Although free AA concentration was relatively high, mean peptide was quantitatively the most important fraction of total SNAN in both RD and OD, indicating that degradation of peptide to AA rather than hydrolysis of soluble protein to peptide or deamination may be the most limiting step in rumen proteolysis of Korean native steers. Diurnal variation in peptide concentration in OD for the soluble protein supplemented diets during the feeding cycle peaked 2 h post-feeding and decreased thereafter whereas that for the control was relatively constant during the entire feeding cycle. Diurnal variation in peptide concentration was rather similar between RD and OD.

Low-power-Consumption metal oxide NO2 gas sensor based on micro-heater and screen printing technology

An NO2 micro gas sensor was fabricated based on a micro-heater using tin oxide nano-powders for effective gas detection and monitoring system with low power consumption and high sensitivity. The processes of the fabrication were acceptable to the conventional CMOS processes for mass-production. Semiconducting SnO2 nano-powders were synthesized via the co-precipitation method; and to increase the sensitivity of the NO2 gas rare metal dopants were added. In the structure of the micro-heater, the resistances of two semi-circular Pt heaters were connected to the spreader for thermal uniformity. The resistance of each heater becomes an electrically equal Wheatstone-bridge, which was divided in half by the heat spreading structure. Based on the aforementioned design, a low-power-consumption micro-heater was fabricated using the CMOS-compatible MEMS processes. A bridge-type micro-heater based on the Si substrate was fabricated via surface micro-machining. The NO2 sensing properties of a screen-printed tin oxide thick film device were measured The micro gas sensors showed substantial sensitivity down to 0.5 ppm NO2 at a low power consumption (34.2 mW).

Optimum condition of anisotropic plasma etching for improving bending properties of ionic polymer-metal composites

We presented an anisotropic plasma etching technique by reactive ion etcher (RIE) as a new pretreatment method of fabrication of ionic polymer-metal composite (IPMC). We already found that the new technique provided large displacement to the fabricated IPMC in the presence of low applied voltage. However, we did not examine the optimum condition for the anisotropic plasma etching. In this research, we tried to figure out optimum treatment condition of film in etcher. Nafion (by DuPont) films were etched using various etching time and shadow masks with various slit and space sizes. The etched samples were plated with Pt at top and bottom side by Oguro's reduction method. The surface morphology of fabricated IPMCs was characterized by SEM. And, we've measured surface resistance, bending displacement, and driving force in order to check the IPMC properties out. Here, we found that optimum condition for pre-treatment of Nafion was 1 min for etching time under shadow mask with 200 microm slit and 100 microm space.

Low power consumption and high sensitivity carbon monoxide gas sensor using indium oxide nanowire

In this paper, micro gas sensor was fabricated using indium oxide nanowire for effective gas detection and monitoring system. Indium oxide nanowire was grown using thermal CVD, and their structural properties were examined by the SEM, XRD and TEM. The electric properties for microdropped indium oxide nanowire device were measured, and gas response characteristics were examined for CO gas. Sensors showed high sensitivity and stability for CO gas. And with below 20 mw power consumption, 5 ppm CO could be detected.

Electroactive polymer actuator with high response speed through anisotropic surface roughening by plasma etching

Plasma etching was performed to improve displacement and response speed of IPMC actuator through homogeneous roughening and anisotropic surface treatment. We found that the anisotropic surface treatment by plasma etching of Nafion in the pre-treatment process gave the response speed and displacement of resulting IPMC which was 2 times faster and 1.5 times larger than those manufactured by the sandblasting, respectively.

Manipulating the fatty acid composition of muscle and adipose tissue in beef cattle

Enhancing the n-3 polyunsaturated fatty acid (PUFA) content of beef is important in view of the generally saturated nature of fatty acids in ruminant meats and the negative effect this can have on human health. This study examined the effects of different sources of dietary n-3 PUFA on the performance of steers and the fatty acid composition of m. longissimus thoracis muscle and associated subcutaneous adipose tissue. Animals were fed ad libitum on grass silage plus one of four concentrates (60:40 forage:concentrate on a DM basis) containing differing sources of lipid: Megalac (16:0), lightly bruised whole linseed (18:3n-3), fish oil (20:5n-3 and 22:6n-3) and a mixture of linseed and fish oil (1:1, on an oil basis). Diets were formulated so that total dietary oil intake was 6 %, approximately half of which was from the experimental test oil. Linseed feeding not only increased the levels of 18:3n-3 in muscle phospholipid from 9.5 to 19 mg/100 g muscle but also enhanced the synthesis of 20:5n-3, the level of which increased from 10 to 15 mg/100 g muscle. Linseed also increased the proportion of 18:3n-3 in muscle neutral lipid and in adipose tissue lipids by a factor of 1.64 and 1.75 respectively. Fish oil feeding doubled the proportion of 20:5n-3 and 22:6n-3 in muscle phospholipids. The proportion of 18:1 trans in muscle neutral lipid was higher on the n-3 PUFA diets than the control diet, 0.04 and 0.02 respectively. Despite the implied modification to rumen metabolism, lipid source did not affect feed intake, growth rate, cold carcass weight or carcass fatness, but carcass conformation score was higher on fish oil treatments (P < 0.05). However, total muscle fatty acid content was not different between treatments and ranged from 3.5-4.3 % of tissue weight. The increase in n-3 PUFA in the meat produced by feeding linseed or fish oil lowered the n-6:n-3 ratio but had little effect on the P:S ratio.