Electrochemical Detection of Melphalan in Biological Fluids Using a g-C3N4@ND-COOH@MoSe2 Modified Electrode Complemented by Molecular Docking Studies with Cellular Tumor Antigen P53

Melphalan (Mel) is a potent alkylating agent utilized in chemotherapy treatments for a diverse range of malignancies. The need for its accurate and timely detection in pharmaceutical preparations and biological samples is paramount to ensure optimized therapeutic efficacy and to monitor treatment progression. To address this critical need, our study introduced a cutting-edge electrochemical sensor. This device boasts a uniquely modified electrode crafted from graphitic carbon nitride (g-C3N4), decorated with activated nanodiamonds (ND-COOH) and molybdenum diselenide (MoSe2), and specifically designed to detect Mel with unparalleled precision. Our rigorous testing employed advanced techniques such as cyclic voltammetry and differential pulse voltammetry. The outcomes were promising; the sensor consistently exhibited a linear response in the range of 0.5 to 12.5 μM. Even more impressively, the detection threshold was as low as 0.03 μM, highlighting its sensitivity. To further enhance our understanding of Mel's biological interactions, we turned to molecular docking studies. These studies primarily focused on Mel's interaction dynamics with the cellular tumor antigen P53, revealing a binding affinity of -5.0 kcal/mol. A fascinating observation was made when Mel was covalently conjugated with nanodiamond-COOH (ND-COOH). This conjugation resulted in a binding affinity that surged to -10.9 kcal/mol, clearly underscoring our sensor's superior detection capabilities. This observation also reinforced the wisdom behind incorporating ND-COOH in our electrode design. In conclusion, our sensor not only stands out in terms of sensitivity but also excels in selectivity and accuracy. By bridging electrochemical sensing with computational insights, our study illuminates Mel's intricate behavior, driving advancements in sensor technology and potentially revolutionizing cancer therapeutic strategies.

Development of a green high-performance liquid chromatography method for tofacitinib quantification in pharmaceutical formulations and degradation studies

A new high-performance liquid chromatography (HPLC) method was applied for the quantification of the active substance of tofacitinib. Analysis was performed on a Chromasil 100 C18 (100.0 × 4.0 mm, 3.5 μm) stationary phase. The mobile phase consisted of acetonitrile:0.2% phosphoric acid in water (12:88, v/v). The prepared sample (20.0 μL) was injected into the system. A detection wavelength of 285.0 nm was chosen for the compound, and the flow rate was 0.8 mL/min. The experiment was completed in 5.0 min. The analysis temperature was set to 40.0°C. The method was evaluated using green chemistry. The method was validated according to the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use guidelines. For linearity studies calibration curves were constructed in the range of 10.0-200.0 μg/mL. The recovery values were calculated at 97.66% and 105.68%. The method developed for the analysis of the active substance had a short analysis time and was cost-effective. It is an environmentally friendly method due to the mobile phase content used. The technique can be used in laboratory analysis and bioequivalence experiments.

Pioneering electrochemical detection unveils erdafitinib: a breakthrough in anticancer agent determination

The successful fabrication is reported of highly crystalline Co nanoparticles interconnected with zeolitic imidazolate framework (ZIF-12) -based amorphous porous carbon using the molten-salt-assisted approach utilizing NaCl. Single crystal diffractometers (XRD), and X-ray photoelectron spectroscopy (XPS) analyses confirm the codoped amorphous carbon structure. Crystallite size was calculated by Scherrer (34 nm) and Williamson-Hall models (42 nm). The magnetic properties of NPCS (N-doped porous carbon sheet) were studied using a vibrating sample magnetometer (VSM). The NPCS has a magnetic saturation (Ms) value of 1.85 emu/g. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses show that Co/Co3O4 nanoparticles are homogeneously distributed in the carbon matrix. While a low melting point eutectic salt acts as an ionic liquid solvent, ZIF-12, at high temperature, leading cobalt nanoparticles with a trace amount of Co3O4 interconnected by conductive amorphous carbon. In addition, the surface area (89.04 m2/g) and pore architectures of amorphous carbon embedded with Co nanoparticles are created using the molten salt approach. Thanks to this inexpensive and effective method, the optimal composite porous carbon structures were obtained with the strategy using NaCl salt and showed distinct electrochemical performance on electrochemical methodology revealing the analytical profile of Erdatifinib (ERD) as a sensor modifier. The linear response spanned from 0.01 to 7.38 μM, featuring a limit of detection (LOD) of 3.36 nM and a limit of quantification (LOQ) of 11.2 nM. The developed sensor was examined in terms of selectivity, repeatability, and reproducibility. The fabricated electrode was utilized for the quantification of Erdafitinib in urine samples and pharmaceutical dosage forms. This research provides a fresh outlook on the advancements in electrochemical sensor technology concerning the development and detection of anticancer drugs within the realms of medicine and pharmacology.

A low-cost voltammetric sensor based on multi-walled carbon nanotubes for highly sensitive and accurate determination of nanomolar levels of the anticancer drug Ribociclib in bulk and biological fluids

In this study, we present the development and comprehensive characterization of the first electrochemical sensor utilizing multi-walled carbon nanotubes (MWCNTs) for the sensitive and precise detection of Ribociclib (RIBO), an important anticancer drug. The sensor underwent systematic optimization, focusing on critical parameters such as pH, deposition potential, and cumulative time to enhance its electrocatalytic activity and expand the linear range for RIBO determination. The MWCNTs/GCE sensor exhibited excellent reproducibility and repeatability, ensuring reliable and consistent results. The applicability and feasibility of the sensor for real sample analysis were extensively evaluated by analyzing human serum, urine, and tablet samples using the standard addition method. The obtained percent recovery values demonstrated the sensor's exceptional accuracy and precision. Furthermore, interference studies revealed the sensor's remarkable selectivity, with minimal impact from common interfering substances. The developed sensor displayed a wide linear range of 0.01 μM to 5.0 μM, with a limit of detection (LOD) and limit of quantification (LOQ) calculated to be 0.69 nM and 2.31 nM, respectively, affirming its high sensitivity for detecting low RIBO concentrations. The MWCNTs/GCE sensor demonstrates substantial promise for diverse practical applications with its simplicity, cost-effectiveness, and excellent analytical performance.

Development of a Cr2AlC MAX phase/g-C3N4 composite-based electrochemical sensor for accurate cabotegravir determination in pharmaceutical and biological samples

A highly sensitive electrochemical sensor is reported that employs a modified electrode for the precise measurement of cabotegravir, a potent anti-HIV drug. Cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS) were utilized for this purpose. Electrode modification involved the immobilization of Cr2AlC MAX phase/g-C3N4 onto a glassy carbon electrode (GCE) to enhance its electrocatalytic activity and selectivity for cabotegravir detection. Under the optimal experimental conditions, the working potential (vs. Ag/AgCl) was to 0.93 V. The developed sensor exhibited a good linear relationship in the range 0.05 µM to 9.34 µM with a low limit of detection of 4.33 nM, signifying its exceptional sensitivity. Additionally, it demonstrated successful cabotegravir detection in pharmaceutical formulations and biological samples, achieving an RSD below 3.0%. The recoveries fell within the range 97.7 to 102%, confirming the sensor's potential for real-sample applications. This innovative electrochemical sensor represents a significant advancement, providing a simple, reliable, and sensitive tool for the accurate measurement of cabotegravir. Its potential applications include optimizing drug dosages, monitoring treatment responses, and supporting the development of cabotegravir-based pharmaceutical products, thereby contributing to advancements in HIV therapy and prevention strategies.

A DNA biosensor strategy in monitoring of Vinorelbine breast cancer drug using catalytic effect of Pt-Pd-ZnO/SWCNTs

The present research work introduced a new electrocatalyst (Pt-Pd-ZnO/SWCNTs in this case) to the fabrication of a powerful DNA biosensor in the monitoring of Vinorelbine anticancer drug. The characterization information confirms the high purity of Pt-Pd-ZnO/SWCNTs nanocomposite and an intercalation reaction between Vinorelbine anticancer drug and the guanine base of DNA in an aqueous solution. The reducing signal of DNA after interaction with Vinorelbine drug showed a linear analytical range of 0.1-120 μM with a detection limit of 0.05 μM. The biosensor was fabricated by layer-by-layer modification of glassy carbon electrode with ds-DNA and Pt-Pd-ZnO/SWCNTs nanocomposite and used as the working electrode to sensing of vinorelbine drug in pharmaceutical and other real samples with acceptable recovery data. The preferential intercalation mode for the binding of vinorelbine anticancer drug into the ds-DNA receptor is clarified using the molecular docking study.

Nanodiamond (ND)-Based ND@CuAl2O4@Fe3O4 electrochemical sensor for Tofacitinib detection: A unified approach to integrate experimental data with DFT and molecular docking

Tofacitinib (TOF) is gaining recognition as a potent therapeutic agent for a variety of autoimmune disorders, including rheumatoid arthritis and psoriasis. Ensuring precise drug concentration control during treatment necessitates a rapid and sensitive detection method. This study introduces a novel electrochemical sensor employing a composite of nanodiamond (ND), copper aluminate spinel oxide (CuAl2O4), and iron (II, III) oxide (Fe3O4) as modified materials for efficient TOF detection. Extensive analyses using physicochemical and electrochemical techniques were carried out to characterize the morphological, structural, and electrochemical properties of the ND@CuAl2O4@Fe3O4 composite. Thereafter, various voltammetric methods were utilized to evaluate the electrochemical behavior of the ND@CuAl2O4@Fe3O4-modified glassy carbon electrode (GCE) concerning TOF determination. The fabricated electrode showcased superior performance in electrochemical TOF detection in a buffered solution (pH = 5), achieving a remarkably low detection limit of 7.8 nM and a linear response from 0.05 μM to 13.21 μM. Furthermore, applying the modified electrode as an electrochemical sensor exhibited exceptional selectivity, stability, and practicality in determining TOF in pharmaceutical and biological samples. Alongside the sensor development, this study conducted a thorough investigation using Density Functional Theory (DFT) for the geometry optimization of TOF and the TOF-ND complex. Consequently performed molecular docking studies using Janus Kinase 1 (JAK1) (PDB ID: 3EYG) and JAK3 (PDB ID: 3LXK) indicated higher interaction of the TOF-ND conjugate with the JAKs, reflected by binding energies of -12.9 kcal/mol and -11.7 kcal/mol for JAK1 and JAK3 respectively, compared to -7.0 kcal/mol and -6.9 kcal/mol for TOF alone. These findings illustrate the potential of the ND-based ND@CuAl2O4@Fe3O4 composite as a proficient sensing material for TOF detection and the merits of DFT in providing a detailed understanding of the interactions at play. This pioneering research holds promise for real-time TOF monitoring, which will advance personalized treatment strategies and improve therapeutic outcomes for patients with autoimmune disorders.

Smart and sensitive nanomaterial-based electrochemical sensor for the determination of a poly (ADP-ribose) polymerase (PARP) inhibitor anticancer agent

In this research, we propose a novel approach for constructing a sensitive and selective electrochemical sensor utilizing high-quality multi-walled carbon nanotubes functionalized with amino groups (MWCNT-NH2) for the detection of Talazoparib (TLZ), a poly (ADP-ribose) polymerase (PARP) enzyme inhibitor, in real samples. The MWCNT-NH2-based sensor exhibited remarkable performance characteristics, including excellent repeatability, reproducibility, and high selectivity against various interferences. Under optimized conditions, the sensor demonstrated a wide linear concentration range of 1.0-5.0 μM, with a low limit of detection (LOD) of 0.201 μM. Substantiated by rigorous analysis of pharmaceutical and biological matrices, our methodology emerges as a paragon of reliability, boasting recovery rates within the satisfactory bracket of 96.38-105.25%. The successful application of the MWCNT-NH2-based sensor in practical sample analysis highlights its potential for implementation in clinical and pharmaceutical settings. This research not only advances the application of MWCNT-NH2 in electrochemical sensing but also opens new avenues for the development and monitoring of innovative anticancer treatments. The insights gained from our study have far-reaching implications, pointing toward a future where precision and innovation converge to improve patient care and treatment outcomes.

A green approach for the analysis of emtricitabine bictegravir and tenofovir in a pharmaceutical preparation using novel HPLC and spectrophotometric methods

Two spectrophotometric techniques and a novel HPLC method were consecutively applied for the simultaneous quantification of the active ingredients of emtricitabine (EMC), tenofovir (TNF), and bictegravir (BIC). The first spectrophotometric method is the dual amplitude difference method coupled with the ratio difference method. TNF was determined using the dual amplitude difference method, while BIC and EMC were determined using the ratio difference method. The second spectrophotometric method was the constant multiplication with absorbance extraction method, and was applied for the determination of active substances used in the treatment of human immunodeficiency virus (HIV) infection. BIC was determined by the constant multiplication method, whereas EMC and TNF were determined using the absorbance extraction method. For the HPLC method, the XBridge C18 column was used. The solvent system comprised acetonitrile:phosphate buffer (pH 6.8; 30:70 v/v). All active ingredients were detected at 260.0 nm, and the flow rate was 0.5 mL/min. The experiment was completed within 5.5 min. The experiments carried out enabled the simultaneous analysis of the three active substances and they were economical, fast, environmentally friendly, and simple. The methods have been successfully applied to prepare mixtures and tablets without matrix interference. The methods were evaluated in terms of green chemistry. The methods have been validated according to International Council for Harmonisation (ICH) guidelines.

Gemcitabine drug intercalation with ds-DNA at surface of ds-DNA/Pt-ZnO/SWCNTs/GCE biosensor: A DNA-biosensor for gemcitabine monitoring confirmed by molecular docking study

Herein, a facile and highly sensitive electroanalytical tool for monitoring and quantifying the antineoplastic drug gemcitabine in real sample was provided. In this regard, a novel DNA-biosensor based on Pt-doped ZnO decorated single walled carbon nanotubes (Pt-ZnO/SWCNTs) hybrid nanomaterial modification of glassy carbon electrode (GCE) was fabricated. Ds-DNA (Calf Thymus), as a biological recognition element, was decorated onto nanomaterial-modified GCE via layer-by-layer fabrication strategy to attain ultimate biosensor ds-DNA/Pt-ZnO/SWCNTs/GCE. The characterizations confirmed the successful fabrication of hybrid nanomaterial, as well as the modification of electrode surface by fabricated nanomaterial. The electrochemical impedance spectroscopy (EIS) analysis revealed that the nanomaterial modification of GCE surface enhanced the electrical conductivity thanks to the synergistic effects of Pt-ZnO and SWCNTs structures, thereby boosted the electrocatalytic activity of the resultant biosensor. The electrochemical characterization results showed that the suggested biosensor is capable of detecting gemcitabine in a wide concentration range of 0.01-30.0 μM, with a detection limit of 5.0 nM. The intercalation binding mode of Gemcitabine inside guanine and cytosine rich region of DNA receptor was approved by molecular docking study. The results of the experimental data were well congruent with the molecular docking analysis, which showed that the binding mode of gemcitabine drug with ds-DNA was intercalation.

Modeling of adsorptive removal of azithromycin from aquatic media by CoFe2O4/NiO anchored microalgae-derived nitrogen-doped porous activated carbon adsorbent and colorimetric quantifying of azithromycin in pharmaceutical products

Herein, it was aimed to optimize the removal process of Azithromycin (Azi) from the aquatic environment via CoFe2O4/NiO nanoparticles anchored onto the microalgae-derived nitrogen-doped porous activated carbon (N-PAC), besides developing a colorimetric method for the swift monitoring of Azi in pharmaceutical products. In this study, the Spirulina platensis (Sp) was used as a biomass resource for fabricating CoFe2O4/NiO@N-PAC adsorbent. The pores of N-PAC mainly entail mesoporous structures with a mean pore diameter of 21.546 nm and total cavity volume (Vtotal) of 0.033578 cm3. g-1. The adsorption studies offered that 98.5% of Azi in aqueous media could remove by CoFe2O4/NiO@N-PAC. For the cyclic stability analysis, the adsorbent was separated magnetically and assessed at the end of five adsorption-desorption cycles with a negligible decrease in adsorption. The kinetic modeling revealed that the adsorption of Azi onto the CoFe2O4/NiO@N-PAC was well-fitted to the second-order reaction kinetics, and the highest adsorption capacity was found as 2000 mg. g-1 at 25 °C based on the Langmuir adsorption isotherm model at 0.8 g. L-1 adsorbent concentration. The Freundlich isotherm model had the best agreement with the experimental data. Thermodynamic modeling indicated the spontaneous and exothermic nature of the adsorption process. Moreover, the effects of pH, temperature, and operating time were also optimized in the colorimetric Azi detection. The blue ion-pair complexes between Azi and Coomassie Brilliant Blue G-250 (CBBG-250) reagent followed Beer's law at wavelengths of 640 nm in the concentration range of 1.0 μM to 1.0 mM with a 0.94 μM limit of detection (LOD). In addition, the selectivity of Azi determination was verified in presence of various species. Furthermore, the applicability of CBBG-250 dye for quantifying Azi was evaluated in Azi capsules as real samples, which revealed the acceptable recovery percentage (98.72-101.27%). This work paves the way for engineering advanced nanomaterials for the removal and monitoring of Azi and assures the sustainability of environmental protection and public health.

Green synthesis of Au@g-C3N4 nanocomposite using Hyssopus officinalis extract and its sensing application for vortioxetine determination

Herein, we introduce a stable and green Au@g-C3N4 nanocomposite as a selective electrochemical sensor for vortioxetine (VOR) determination. The electrochemical behavior of VOR on the developed electrode was investigated through cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), and chronoamperometry. The Au@g-C3N4 nanocomposite was thoroughly observed by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and scanning electron microscopy. The Au@g-C3N4 nanocomposite had a higher conductivity and a narrower band gap than pure g-C3N4, causing higher electrochemical activity for VOR detection. Moreover, Au@g-C3N4 on the glassy carbon electrode (Au@g-C3N4/GCE) monitored a low level of VOR with high efficiency and low interference as an environmentally friendly processing approach. Interestingly, the as-fabricated sensor exhibited an ultrahigh selectivity for recognizing VOR with a detection limit (LOD) of 3.2 nM. Furthermore, the developed sensor was applied to determine VOR in pharmaceutical and biological samples, which indicated a high selectivity in the presence of interferences. This study suggests new insights into the phytosynthesis synthesis of nanomaterials with excellent biosensing applications.

A novel atropine electrochemical sensor based on silver nano particle-coated Spirulina platensis multicellular blue-green microalga

In this work, Atropine as the anticholinergic drug was measured using the environmentally friendly sensor. In this regard, Self-cultivated Spirulina platensis with electroless silver was employed as a powder amplifier in carbon paste electrode modification. Also, 1-Hexyl-3 methylimidazolium Hexafluorophosphate (HMIM PF₆) ion liquid as a conductor binder was used in the suggested electrode construction. Atropine determination was investigated by voltammetry methods. According to voltammograms, the electrochemical behavior of atropine depends on pH, and pH 10.0 was used as the optimal condition. Moreover, the diffusion control process for the electro-oxidation of atropine was verified by the scan rate study, so the diffusion coefficient (D∼ 3.0136×10^-4cm²/sec) value was computed from the chronoamperometry study. Furthermore, responses of the fabricated sensor were linear in the concentration range from 0.01 to 800 μM, and the lowest detection limit of the Atropine determination was obtained at 5 nM. Moreover, the stability, reproducibility, and selectivity factors of the suggested sensor were confirmed by the results. Finally, the recovery percentages for atropine sulfate ampoule (94.48-101.58), and water (98.01-101.3) approve of the applicability of the proposed sensor to Atropine determination in real samples.

An electrochemical sensing platform with a molecularly imprinted polymer based on chitosan-stabilized metal@metal-organic frameworks for topotecan detection

The present study aims to develop an electroanalytical method to determine one of the most significant antineoplastic agents, topotecan (TPT), using a novel and selective molecular imprinted polymer (MIP) method for the first time. The MIP was synthesized using the electropolymerization method using TPT as a template molecule and pyrrole (Pyr) as the functional monomer on a metal-organic framework decorated with chitosan-stabilized gold nanoparticles (Au-CH@MOF-5). The materials' morphological and physical characteristics were characterized using various physical techniques. The analytical characteristics of the obtained sensors were examined by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). After all characterizations and optimizing the experimental conditions, MIP-Au-CH@MOF-5 and NIP-Au-CH@MOF-5 were evaluated on the glassy carbon electrode (GCE). MIP-Au-CH@MOF-5/GCE indicated a wide linear response of 0.4-70.0 nM and a low detection limit (LOD) of 0.298 nM. The developed sensor also showed excellent recovery in human plasma and nasal samples with recoveries of 94.41-106.16 % and 95.1-107.0 %, respectively, confirming its potential for future on-site monitoring of TPT in real samples. This methodology offers a different approach to electroanalytical procedures using MIP methods. Moreover, the high sensitivity and selectivity of the developed sensor were illustrated by the ability to recognize TPT over potentially interfering agents. Hence, it can be speculated that the fabricated MIP-Au-CH@MOF-5/GCE may be utilized in a multitude of areas, including public health and food quality.

Algae extract delamination of molybdenum disulfide and surface modification with glycidyl methacrylate and polyaniline for the elimination of metal ions from wastewater

A special type of two-dimensional (2D) material based conducting polymer was constructed by green synthesis and in-situ polymerization techniques. The 2D Molybdenum Disulfide (MoS₂) were first synthesized with the combination of, ammonium tetrathiomolybdate dissolved in 20 mL algae extract under stirring. After stirring for about 2 h, and then finally sulfurization was initiated using sulfur powder in 20 mL of sulfuric solution and stirred for 8 h. The resulting black precipitates of MoS₂ were collected by centrifugation at 5000 rpm. Moreover, the prepared MoS₂ was functionalized with glycidyl methacrylate (GMA) and form the MoS₂@PGMA. Further, the MoS₂@PGMA is combined with polyaniline (PANI) to form conducting polymer grafted thin film nanosheets named MoS₂@PGMA/PANI with a thickness in micrometer size through grafting method. The prepared materials were characterized by SEM, FTIR, XRD, XPS and EDX techniques. To check the performance of materials the adsorption study was performed. Moreover, the adsorption study toward Cu²⁺ and Cd²⁺ showed a tremendous results and the maximum adsorption was 307.7 mg/g and 214.7 mg/g respectively. In addition, the pseudo-first and second order models as well as the adsorption isotherm were investigated using the Langmuir and Freundlich model. The results were best fitted with the pseudo-second order and Langmuir models. The regeneration study was also conducted and MoS₂@PGMA/PANI nanosheets can be easily recycled and restored after five successful recycling. The established methodology for preparing the 2D materials and conducting polymer based MoS₂@PGMA/PANI nanosheets is expected to be applicable for other multiple applications.

Advances in technology and utilization of natural resources for achieving carbon neutrality and a sustainable solution to neutral environment

The greatest environmental issue of the twenty-first century is climate change. Human-caused greenhouse gas emissions are increasing the frequency of extreme weather. Carbon dioxide (CO₂) accounts for 80% of human greenhouse gas emissions. However, CO₂ emissions and global temperature have risen steadily from pre-industrial times. Emissions data are crucial for most carbon emission policymaking and goal-setting. Sustainable and carbon-neutral sources must be used to create green energy and fossil-based alternatives to reduce our reliance on fossil fuels. Near-real-time monitoring of carbon emissions is a critical national concern and cutting-edge science. This review article provides an overview of the many carbon accounting systems that are now in use and are based on an annual time frame. The primary emphasis of the study is on the recently created carbon emission and eliminating sources and technology, as well as the current application trends for carbon neutrality. We also propose a framework for the most advanced naturally available carbon neutral accounting sources capable of being implemented on a large scale. Forming relevant data and procedures will help the "carbon neutrality" plan decision-making process. The formation of pertinent data and methodologies will give robust database support to the decision-making process for the "carbon neutrality" plan for the globe. In conclusion, this article offers some opinions, opportunities, challenges and future perspectives related to carbon neutrality and carbon emission monitoring and eliminating resources and technologies.

Two dimensional (2D) materials and biomaterials for water desalination; structure, properties, and recent advances

BACKGROUND

An efficient solution to the global freshwater dilemma is desalination. MXene, Molybdenum Disulfide (MoS₂), Graphene Oxide, Hexagonal Boron Nitride, and Phosphorene are just a few examples of two-dimensional (2D) materials that have shown considerable promise in the development of 2D materials for water desalination. However, other promising materials for desalinating water are biomaterials. The benefits of bio-materials are their wide distribution, lack of toxicity, and superior capacity for water desalination.

METHODS

For the rational use of water and the advancement of sustainable development, it is of the utmost importance to research 2D-dimensional materials and biomaterials that are effective for water desalination. The scientific community has concentrated on wastewater remediation using bio-derived materials, such as nanocellulose, chitosan, bio-char, bark, and activated charcoal generated from plant sources, among the various endeavors to enhance access to clean water. Moreover, the 2D-materials and biomaterials may have ushered in a new age in the production of desalination materials and created a promising future.

RESULTS

The present review article focuses on and reviews the progress of 2D materials and biomaterials for water desalination. Their properties, surface, and structure, combined with water desalination applications, are highlighted. Further, the practicability and potential future directions of 2D materials and biomaterials are proposed. Thus, the current work provides information and discernments for developing novel 2D materials and biomaterials for wastewater desalination. Moreover, it aims to promote the contribution and advancement of materials for water desalination, fabrication, and industrial production.

Electrochemical Biosensors as a Novel Platform in the Identification of Listeriosis Infection

Listeria monocytogenes (L.M.) is a gram-positive bacillus with wide distribution in the environment. This bacterium contaminates water sources and food products and can be transmitted to the human population. The infection caused by L.M. is called listeriosis and is common in pregnant women, immune-deficient patients, and older adults. Based on the released statistics, listeriosis has a high rate of hospitalization and mortality; thus, rapid and timely detection of food contamination and listeriosis cases is necessary. During the last few decades, biosensors have been used for the detection and monitoring of varied bacteria species. These devices are detection platforms with great sensitivity and low detection limits. Among different types of biosensors, electrochemical biosensors have a high capability to circumvent several drawbacks associated with the application of conventional laboratory techniques. In this review article, different electrochemical biosensor types used for the detection of listeriosis were discussed in terms of actuators, bioreceptors, specific working electrodes, and signal amplification. We hope that this review will facilitate researchers to access a complete and comprehensive template for pathogen detection based on the different formats of electrochemical biosensors.

Innovative molecularly imprinted electrochemical sensor for the nanomolar detection of Tenofovir as an anti-HIV drug

Tenofovir (TNF) is an antiviral medicine that is utilized to treat the human immunodeficiency virus (HIV). However, its level must be controlled in the human body and environment at the risk of causing kidney and liver problems. Therefore, determining TNF concentration in real samples with more advanced, inexpensive, and accurate sensing systems is essential. In this work, a novel electrochemical nanosensor for TNF determination based on molecularly imprinted polymer (MIP) on the screen-printed electrode modified with functionalized multi-walled carbon nanotubes, graphite carbon nitride, and platinum nanoparticles (MIP-Pt@g-C₃N₄/F-MWCNT/SPE) was constructed through the electro-polymerization approach. The molecularly imprinted polymers were prepared on the electrode surface with TNF as the template molecule and 2-aminophenol (2-AP) as the functional monomer. Moreover, factors that affect sensor response were optimized. Pt@g-C₃N₄/F-MWCNT nanocomposite had an excellent synergistic effect on MIP, allowing rapid and specific identification of the test substance. The results demonstrated that the electro-polymerization of 2-AP supplies large amounts of functional groups for the binding of the template molecules, which remarkably enhances the sensitivity and specific surface area of the MIP sensor. This surface enlargement increased the analyte accessibility to imprinted molecular cavities. Under optimum conditions, the oxidation peak current had a linear relationship with TNF concentration ranging from 0.005 to 0.69 μM with a low detection limit of 0.0030 μM (S/N = 3). The results demonstrated that the designed MIP sensor possesses acceptable sensitivity, repeatability, and reproducibility toward TNF determination. Moreover, the developed sensor was applied to biological and water samples to determine TNF, and satisfactory recovery results of 95.6-104.8% were obtained (RSD less than 10.0%). We confirm that combining as-synthesized nanocomposite Pt@g-C₃N₄/F-MWCNT with MIP improves the limitations of MIP-based nanosensors. The proposed electrode is also compatible with portable potentiostats, allowing on-site measurements and showing tremendous promise as a point-of-care (POC) diagnostic platform.

Carbon-based photocatalysts for hydrogen production: A review

Future energy crises and environmental deterioration may only be avoided by converting solar energy into sustainable, safe, cost-effective, and environmentally friendly technologies such as water splitting. Many researchers and governments throughout the globe have stressed the imperative need for affordable, environmental benign, resistive to corrosion, and earth-abundant nanostructured photocatalysts. This has led scientists to look for a green and cost-effective way to generate energy. As a result, the significance of photo catalyst engineering and reactor design difficulties connected to the performance of the photocatalytic reactions, as well as the examination and analysis of photocatalyst behaviors for adaptable and cost effective H2 production, is emphasized and summarized. The carbon-based materials have an appealing band structure, strong chemical stability, is plentiful on Earth, and is relatively easy to produce, making them suitable for hydrogen production. As example, graphene oxide (GO) with the oxygenated functional groups and graphene and its counterparts, including Graphene quantum dots (GQDs), GO, reduce graphene oxide (rGO), have been demonstrated to be ideal nanocomposite materials due to their superior properties and distribution in matrix and CNTs with excellent electronic transmission efficiency, low cost, stability, and environmental friendly are a great alternative of electron mediators for photocatalytic devices to boost light absorptivity for efficient hydrogen generation but some of them have limited photocatalytic activity due to their low sunlight usage efficiency, therefore the numerous methods, such as doping ions, constructing heterostructure, and functionalizing carbon-based materials, have recently been proven to promote the photocatalytic activity of them. The pore structure of carbon material functions as an acceptor of photogenerated electrons, improved the photocatalyst's specific surface area. Generally low-dimensional carbon materials demonstrated immense promise as highly efficient, low-cost, and environmentally friendly catalysts for hydrogen generation as an energy source. This article reviews the recent research progress on carbon-based materials for hydrogen evolution for the first time. It commences with a quick overview of the present state of affairs and fundamental concepts of hydrogen production in carbon-based nanomaterials for use in this field. We anticipate that this study will inspire readers to expand the use of carbon-based materials in H₂ generation in a more environmentally friendly way.

A novel 2-dimensional nanocomposite as a mediator for the determination of doxorubicin in biological samples

In our study, the electrochemical properties of a novel activated nanocomposite were studied with 2-dimensional graphitic carbon nitride/sodium dodecyl sulfate/graphene nanoplatelets on the screen-printed electrodes (2D-g-C₃N₄/SDS/GNPs/SPE). The as-fabricated sensor exhibited excellent electrochemical performance, including wide dynamic ranges from 0.03 to 1.0 and 1.0-13.5 μM with a low limit of detection (LOD) of 10.0 nM. The fabricated 2D-g-C₃N₄/SDS/GNPs/SPE electrode exhibited high sensitivity, stability, good reproducibility, reusability, and repeatability towards DOX sensing. It can be utilized in real samples, including human plasma and urine, with excellent correlations and coefficients of variation below 6.0%. Therefore, this study presents potential application values in sensing DOX with efficient performance. Finally, the accuracy was attested by comparison with high-performance liquid chromatography (HPLC) as the reference method, signalizing a good agreement.

Electrochemical Sensing of Favipiravir with an Innovative Water-Dispersible Molecularly Imprinted Polymer Based on the Bimetallic Metal-Organic Framework: Comparison of Morphological Effects

Molecularly imprinted polymers (MIPs) are widely used as modifiers in electrochemical sensors due to their high sensitivity and promise of inexpensive mass manufacturing. Here, we propose and demonstrate a novel MIP-sensor that can measure the electrochemical activity of favipiravir (FAV) as an antiviral drug, thereby enabling quantification of the concentration of FAV in biological and river water samples and in real-time. MOF nanoparticles’ application with various shapes to determine FAV at nanomolar concentrations was described. Two different MOF nanoparticle shapes (dodecahedron and sheets) were systematically compared to evaluate the electrochemical performance of FAV. After carefully examining two different morphologies of MIP-Co-Ni@MOF, the nanosheet form showed a higher performance and efficiency than the nanododecahedron. When MIP-Co/Ni@MOF-based and NIP-Co/Ni@MOF electrodes (nanosheets) were used instead, the minimum target concentrations detected were 7.5 × 10−11 (MIP-Co-Ni@MOF) and 8.17 × 10−9 M (NIP-Co-Ni@MOF), respectively. This is a significant improvement (>102), which is assigned to the large active surface area and high fraction of surface atoms, increasing the amount of greater analyte adsorption during binding. Therefore, water-dispersible MIP-Co-Ni@MOF nanosheets were successfully applied for trace-level determination of FAV in biological and water samples. Our findings seem to provide useful guidance in the molecularly imprinted polymer design of MOF-based materials to help establish quantitative rules in designing MOF-based sensors for point of care (POC) systems.

Simultaneous determination of hydrochlorothiazide, amlodipine, and telmisartan with spectrophotometric and HPLC green chemistry applications

For the quantifiable amounts of Telmisartan (TLM) and Hydrochlorothiazide (HYD) in the presence of Amlodipine (AML) in a ternary mixture of synthetic laboratory mixture, a novel, sensitive, quick, and practical reversed-phase high-performance liquid chromatography (RP-HPLC) method was given. In order to separate, a Waters Spherisorb ODS-2 C18 column was used. For HYD, TLM, and AML, these techniques were viable over linearity ranges of 4-12 μg/mL, 4-25 μg/mL, and 5-40 μg/mL, respectively. The mobile phase system was acetonitrile:methanol: phosphate buffer at pH 2.5 (65:5:30 v/v/v), and the flow rate was 1.5 mL/min. Novel spectrophotometric methods were applied for active substances to determine simultaneously. The first method is absorptivity centering using factorized spectrum, and the second method is dual amplitude difference coupled with absorbance subtraction. These approaches have been effectively applied to bulk, laboratory synthetic mixtures to employ active components quantitatively. Correlation coefficients were found to be higher than 0.99 and the limit of detection values lower than 0.49 μg/mL in both spectrophotometric methods. The methodologies were validated following ICH recommendations. In the developed HPLC method, the limit of detection values was found to be 0.01 μg/mL for HYD and 0.02 μg/mL for AML and TLM. The correlation coefficients for the HPLC method were found to be 0.9971 for HYD, 0.9990 for AML, and 0.9983 for TLM. The suggested HPLC technique is a simple, effective, sensitive, environmentally friendly, and time-saving approach for determining TLM and HYD in the presence of AML.

Determination of active ingredients in antihypertensive drugs using a novel green HPLC method approach

A novel, sensitive, fast, and pratic RP-HPLC methods were presented for the quantitative amounts of Telmisartan (TEL) and Olmesartan (OLM) in the presence of Amlodipin (AML) in a binary mixture of pharmaceutical preparation. Waters Spherisorb ODS-2 C18 column was used for separation. These methods were valid over linearity ranges of 2.5-30 μμg/mlL, 2-85 μμg/mlL, and 2-35 μμg/mlL for OLM, TEL, and AML, respectively. The mobile phase system consisted of acetonitrile:methanol: phosphate buffer at pH 3.0 (65:5:30 v/v/v), and the flow rate was 1,5 mlL/min for OLM and AML. The mobile system's other mixture (TEL and AML) was acetonitrile:methanol: phosphate buffer at pH 2.5 (65:5:30 v/v/v), and the flow rate was 1,5 mlL/min. These procedures were successfully applied to bulk, laboratory synthetic mixture, and medicinal dosage forms to use active ingredients quantitatively. The studied methods were validated according to ICH guidelines. In the developed HPLC method, the limit of detection values was found to be 0.020 μμg/mlL for TEL, 0.025 μμg/mlL for OML, and 0.070 μμg/mlL for AML. The correlation coefficients for the HPLC method were found to be 0.9938 for TEL, 0.9996 for OML, and 0.9982 for AML. The calibration range is between 2.5 and -30, 5-35, and 2-85 μμg/mlL for OLM, AML, and TEL, respectively. The proposed HPLC method is a convenient, effective, sensitive, green, and time-saving method for the rapid determination of TEL and OLM in the presence of AML.

A reusable and sensitive electrochemical sensor for determination of idarubicin in environmental and biological samples based on NiFe2O4 nanospheres anchored N-doped graphene quantum dots composite; an electrochemical and molecular docking investigation

An ultrasensitive and selective voltammetric sensor with ultra-trace level detection limit is introduced for idarubicin (IDA) determination in real samples. The as-synthesized nanocomposite was characterized by several techniques, including Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Raman spectroscopy, Energy-dispersive X-ray spectroscopy (EDX), and Field emission scanning electron microscopy (FE-SEM). The electrocatalytic performance of the developed electrode was observed by cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), and chronoamperometry. The limit of detection (LOD) of the developed sensor for idarubicin is 1.0 nM, and the response is found to be in the dynamic concentration range of 0.01-1.9 μmol/L in a Britton-Robinson buffer (B-R, pH = 6.0). Moreover, the fabricated electrode illustrated high selectivity with good repeatability and reproducibility for diagnosing idarubicin as an anthracycline antileukemic drug. Furthermore, to evaluate the validity of the recommended method, three real samples, including human plasma, urine, and water samples, were analyzed with satisfactory recovery and compared with high-performance liquid chromatography (HPLC). The minor groove-binding mode of interaction was also supported by docking simulation studies, emphasizing that IDA can bind to ds-DNA preferably and confirmed experimental results. The reduced assay time and the possibility of measuring a single sample with another anticancer drug without any interference are significant advantages compared to the HPLC. The developed and validated sensor could be a valuable point-of-care diagnostic tool for IDA quantification in patients.

A zinc oxide nanorods/molybdenum disulfide nanosheets hybrid as a sensitive and reusable electrochemical sensor for determination of anti-retroviral agent indinavir

This work aims to develop an electrochemical sensor for the reusable and selective detection of trace levels of indinavir (IDV) as an anti-retroviral drug by using zinc oxide nano-rods/molybdenum disulfide nanosheets on a screen-printed electrode (ZnO NRs/MoS₂ NSs/SPE). Quantitative IDV detection was achieved using differential pulse voltammetry (DPV). The assay specificity was illustrated using interfering species and exhibited high specificity toward the IDV. The developed displayed a wide dynamic range, from 0.01 to 0.66 and 0.66-7.88 μM in Britton-Robinson (B-R) buffer, with a 0.007 μM limit of detection. The fabricated ZnO NRs/MoS₂ NSs/SPE electrode exhibited high sensitivity, stability, good reproducibility, and repeatability towards the sensing of IDV. It turned out that the hybrid electrochemical sensor's sensing performance was remarkably improved due to the synergistic effect between MoS₂ NSs and ZnO NRs, where the former affords a large active surface area and quick electron transfer. The reported sensor provides a new alternative for electrochemical detection of IDV and could expand the applications of metal nanoparticles in emerging technologies for monitoring drugs in real samples.

The power of High Impact Amplitude Manipulation (HIAM) technique for extracting the basic spectra of two Fixed-dose combinations (FDC) -Spectrophotometric purity analysis via spectral contrast angle

HIAM technique allows the extraction of the original constant signal of each single component out of interference signals of a mixture and further transformed into basic spectrum (D⁰). It includes the methods: ratio subtraction coupled with unified constant subtraction (RS-UCS), constant center (CC) and constant extraction (CE). The technique was introduced for the analysis of two pharmaceutical formulations used to treat cardiovascular diseases. The formulations are binary combinations of Amlodipine (AML) with either Atorvastatin (ATR) or Candesartan (CND) which shows interefernce absorbance signals. The technique was valid over the linearity range of (5.0-35.0 µg/ml) for AML, ATR and CND with recovery percentage 100.40 ± 1.88 , 100.00 ± 0.86 and 99.83 ± 1.07, respectively . The extracted signals were tested for its purity by spectral contrast angle (cos θ) to illustrate the efficency of the HIAM technique where cos θ values ranges from (0.9902 to 0.9986). The presented technique was fully validated regarding ICH guidelines and were statistically compared using one-way ANOVA at 95% confidence.

Cerium functionalized graphene nano-structures and their applications; A review

Graphene-based nanomaterials with remarkable properties, such as good biocompatibility, strong mechanical strength, and outstanding electrical conductivity, have dramatically shown excellent potential in various applications. Increasing surface area and porosity percentage, improvement of adsorption capacities, reduction of adsorption energy barrier, and also prevention of agglomeration of graphene layers are the main advantages of functionalized graphene nanocomposites. On the other hand, Cerium nanostructures with remarkable properties have received a great deal of attention in a wide range of fields; however, in some cases low conductivity limits their application in different applications. Therefore, the combination of cerium structures and graphene networks has been widely invesitaged to improve properties of the composite. In order to have a comprehensive information of these nanonetworks, this research reviews the recent developments in cerium functionalized graphene derivatives (graphene oxide (GO), reduced graphene oxide (RGO), and graphene quantum dot (GQD) and their industrial applications. The applications of functionalized graphene derivatives have also been successfully summarized. This systematic review study of graphene networks decorated with different structure of Cerium have potential to pave the way for scientific research not only in field of material science but also in fluorescent sensing, electrochemical sensing, supercapacitors, and catalyst as a new candidate.

An electrochemical molecularly imprinted sensor based on CuBi2O4/rGO@MoS2 nanocomposite and its utilization for highly selective and sensitive for linagliptin assay

The molecularly imprinted polymers (MIP) is an outstanding electrochemical tool that demonstrates good chemical sensitivity and stability. These main advantages, coupled with the material's vast microfabrication flexibility, make molecularly imprinted sensors an attractive sensing device. Herein, it was aimed to develop a state-of-art molecularly imprinted sensor based on CuBi₂O₄/rGO@MoS₂ nanocomposite to be utilized for the detection of linagliptin (LNG), a novel hypoglycemic drug. The electrochemical characterizations of linagliptin on the surface of the modified electrode was examined via cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). Several characterization methods including transmission electron microscope (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), and Energy-dispersive X-ray spectroscopy(EDX), were utilized for electrode characterization. The LNG imprinted voltammetric sensor was developed in 80.0 mM phenol containing 20.0 mM LNG. CuBi₂O₄/rGO@MoS₂ nanocomposite on LNG imprinted screen-printed carbon electrode (SPCE) (MIP/CuBi₂O₄/rGO@MoS₂ nanocomposite/SCPE) exhibited a linear relationship between peak current and LNG concentration in the range 0.07-0.5 nM with a detection limit of 0.057 nM. In the existence of interfering substances, an LNG imprinted electrode was utilized to analyze urine, human plasma, and tablet samples with adequate selectivity. The developed sensor was also illustrated for stability, repeatability, reproducibility, and reusability.

Dual-response electrochemical electrode for sensitive monitoring of topotecan and mitomycin as anticancer drugs in real samples

This research paper employed an innovative electrochemical electrode to simultaneously determine topotecan (TPT) and mitomycin (MMC) as anticancer agents. For this purpose, a novel nanocomposite was synthesized using a hydrothermal procedure. The nanocomposites were characterized using FTIR, STEM, FESEM, mapping analysis, EDX, and XRD methods. The novelty of this work is the successful synthesis of Fe₃O₄ decorated on the surface of CuCo₂S₄ (Fe₃O₄@CuCo₂S₄) nanocomposites showed two separate anodic peaks at 0.8 V for TPT and 1.0 V for MMC with potential separation of 0.2 V. This was enough for the simultaneous electrochemical determination of topotecan and mitomycin on a glassy carbon electrode (GCE), simultaneously. At optimized conditions, the developed electrode exhibited linear responses with TPT and MMC concentration in the ranges of 0.01-0.89 and 0.89-8.95 μM for topotecan and 0.1-19.53 μM for mitomycin. The detection limits were observed as 6.94 nM and 80.00 nM for topotecan and mitomycin, respectively. The fabricated Fe₃O₄@CuCo₂S₄/GCE showed high sensitivity, long-term stability, and repeatability towards the sensing of TPT and MMC simultaneously and can be utilized in real samples. The obtained results confirmed that the fabricated Fe₃O₄@CuCo₂S₄/GCE nanocomposites can be utilize in the simultaneous electrochemical determination of topotecan and mitomycin in real samples.

A sensitive voltammetric sensor for specific recognition of vitamin C in human plasma based on MAPbI3 perovskite nanorods

A novel and sensitive electrode was suggested for the rapid determination of ascorbic acid (AA) using a glassy carbon electrode (GCE) modified with synthesized MAPbI3 and L-cys (L-cys/MAPbI3/GCE). Determination of ascorbic acid as an important component of the human diet due to help in decreasing blood pressure and improving endothelial function is crucial. The synthesized MAPbI3 was characterized by different methods, including transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). The fabricated electrode exhibited superior electrical conductivity and fast electron transfer kinetics. The results illustrated that the developed electrode had an outstanding electrocatalytic activity towards the oxidation of AA in 0.1 M Britton–Robinson buffer(B-R) as a supporting electrolyte. The modified electrode demonstrated a linear range in differential pulse voltammetry of 0.02–11.4 µM with a low detection limit of 8.0 nM for ascorbic acid. It can be stated that the proposed sensor can be successfully applied to the determination of ascorbic acid in human plasma samples.

Electrochemical immunosensor for rapid and highly sensitive detection of SARS-CoV-2 antigen in the nasal sample

A label-free electrochemical biosensing approach as an appropriate analysis technique for SARS-CoV-2 spike protein (SARS-CoV-2 S-protein) was investigated to facilitate the diagnosis of coronavirus in real samples. It is crucial to construct diagnostic features that can rapidly identify infected individuals to limit the spread of the virus and assign treatment choices. Therefore, a novel and selective method using SiO₂@UiO-66 and a label-free electrochemical immunoassay for rapidly detecting spike protein. The development of innovative approaches for direct viral detection employing simplified and ideally reagent-free assays is a pressing and difficult topic. The absence of speedy and effective ways to diagnose viral diseases especially SARS-CoV-2 on demand has worsened the issue of combating the COVID-19 pandemic. The developed electrode illustrated a wide dynamic range of 100.0 fg mL⁻¹ to 10.0 ng mL⁻¹ with low limit detection. Therefore, the as-fabricated electrochemical SARS-CoV-2 S-protein sensor suggests an appropriate perspective in the point-of-care system, within 5.0 min, in nasal samples with satisfactory recovery.

Novel enzymatic graphene oxide based biosensor for the detection of glutathione in biological body fluids

In this work, we report a novel enzymatic biosensor based on glutathione peroxidase (GSH-Px), graphene oxide (GO) and nafion for the electrochemical sensing of glutathione (GSH) in body fluids. GSH-Px was immobilized covalently via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) onto modified glassy carbon electrode (GCE) decorated with GO and nafion and successfully used for sensing of GSH in the presence of H₂O₂ as catalyst with Michaelis-Menten constant about 0.131 mmol/L. The active surface are of GCE improve from 0.183 cm² to 0.225 cm² after modification with GO. The introduced biosensor (GSH-Px/GO/nafion/GCE) was used for monitoring of GSH over the range 0.003-370.0 μM, with a detection limit of 1.5 nM using differential pulse voltammetric (DPV) method. The GSH-Px/GO/nafion/GCE was successfully applied to the determination of GSH in real samples.

Three-dimensional porous reduced graphene oxide decorated with carbon quantum dots and platinum nanoparticles for highly selective determination of azo dye compound tartrazine

In this work, an electrochemical sensor for the azo dye compound tartrazine (TRT) determination was proposed. A screen-printed carbon electrode (SPCE) was modified by depositing three-dimensional porous reduced graphene oxide decorated with carbon quantum dots and platinum nanoparticles (Pt/CQDs@rGO/SPCE). The resulting amount of TRT was observed by differential pulse voltammetry. Under optimal conditions, the sensor exhibited two wide linearities ranging from 0.01 to 1.57 μM and 1.57-9.3 μM with the reliability coefficient of determination of 0.991 and 0.992, respectively. The detection limit (LOD) was also estimated to be 7.93 nM. Moreover, the Pt/CQDs@rGO/SPCE suggested high selectivity in the presence of several interfering agents and azo dye compounds that have a similar structure. Additionally, the Pt/CQDs@rGO/SPCE revealed superior recovery values of about 96.5-101.6% for candy, 99.7-103.5% for soft drinks, 96.0-101.2% for jelly powder, and 98.0-103.0% for water samples. Furthermore, the fabricated sensor exhibits excellent selectivity, stability, reproducibility, and repeatability, indicating a great perspective in the monitoring of TRT. Therefore, it can be speculated that the proposed electrode could be effectively applied to determine TRT in food samples.

Voltammetric sensor based on bimetallic nanocomposite for determination of favipiravir as an antiviral drug

A novel and sensitive voltammetric nanosensor was developed for the first time for trace level monitoring of favipiravir based on gold/silver core–shell nanoparticles (Au@Ag CSNPs) with conductive polymer poly (3,4-ethylene dioxythiophene) polystyrene sulfonate (PEDOT:PSS) and functionalized multi carbon nanotubes (F-MWCNTs) on a glassy carbon electrode (GCE). The formation of Au@Ag CSNPs/PEDOT:PSS/F-MWCNT composite was confirmed by various analytical techniques, including X-ray diffraction (XRD), ultraviolet–visible spectroscopy (UV–Vis), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and field-emission scanning electron microscopy (SEM). Under the optimized conditions and at a typical working potential of + 1.23 V (vs. Ag/AgCl), the Au@Ag CSNPs/PEDOT:PSS/F-MWCNT/GCE revealed linear quantitative ranges from 0.005 to 0.009 and 0.009 to 1.95 µM with a limit of detection 0.46 nM (S/N = 3) with acceptable relative standard deviations (1.1-4.9 %) for pharmaceutical formulations, urine, and human plasma samples without applying any sample pretreatment (1.12–4.93%). The interference effect of antiviral drugs, biological compounds, and amino acids was negligible, and the sensing system demonstrated outstanding reproducibility, repeatability, stability, and reusability. The findings revealed that this assay strategy has promising applications in diagnosing FAV in clinical samples, which could be attributed to the large surface area on active sites and high conductivity of bimetallic nanocomposite.

Construction of a simple and selective electrochemical sensor based on Nafion/TiO2 for the voltammetric determination of olopatadine

A selective and facile voltammetric method based on titanium dioxide nanoparticles and Nafion (Nafion/TiO2 NPs) on the screen-printed electrode (SPE) was proposed for olopatadine determination. Followed by the synthesis of TiO2 nanoparticles, various methods, including high-resolution transmission electron microscopy (HR-TEM), ultraviolet-visible spectroscopy (UV-Vis), energy-dispersive X-ray (EDX) Raman spectrum, and electrochemical impedance spectroscopy (EIS) were utilized to characterize the nanomaterials. Nafion/TiO2 on the screen-printed electrode (NFN/TiO2/SPE) was used to determine olopatadine in concentration ranges of 0.01 to 0.07 and 0.07 to 14.6 µM with a limit of quantification as low as 7.0 nM, via differential pulse voltammetry technique. The NFN/TiO2/SPE offered a high-performance ability to determine olopatadine in the eye drop sample with satisfactory recovery data of 98.2–99.0 %. Also, the developed electrode showed good reproducibility, repeatability, and high selectivity features. The obtained results indicate that NFN/TiO2/SPE could be utilized as an appropriate candidate for electrochemical olopatadine sensing.

Sensitive and Selective Electrochemical Detection of Epirubicin as Anticancer Drug Based on Nickel Ferrite Decorated with Gold Nanoparticles

The accurate and precise monitoring of epirubicin (EPR), one of the most widely used anticancer drugs, is significant for human and environmental health. In this context, we developed a highly sensitive electrochemical electrode for EPR detection based on nickel ferrite decorated with gold nanoparticles (Au@NiFe₂O₄) on the screen-printed electrode (SPE). Various spectral characteristic methods such as Fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-Vis), energy-dispersive X-ray spectroscopy (EDX) and electrochemical impedance spectroscopy (EIS) were used to investigate the surface morphology and structure of the synthesized Au@NiFe₂O₄ nanocomposite. The novel decorated electrode exhibited a high electrocatalytic activity toward the electrooxidation of EPR, and a nanomolar limit of detection (5.3 nM) was estimated using differential pulse voltammetry (DPV) with linear concentration ranges from 0.01 to 0.7 and 0.7 to 3.6 µM. The stability, selectivity, repeatability reproducibility and reusability, with a very low electrode response detection limit, make it very appropriate for determining trace amounts of EPR in pharmaceutical and clinical preparations.

Trade-off efficacy and data processing strategy in the power of spectral resolution of co-formulated antihypertensive pharmaceuticals

Versatile, extraction-free univariate spectrophotometric methods have been modified to get effective spectral resolution of mixtures in accordance with their feature challenges. The proposed methods have been applied and validated for analyzing some antihypertensive medicines in their co-formulated medicinal products. Two mixtures have been used: the first one [Mix I _(OLM/ADB)] is composed of Olmesartan medoxomil (OLM) and Amlodipine besylate (ADB) with partly-overlapped spectra while the second [Mix II _(TEL/HCT)] is made up Telmisartan (TEL) and Hydrochlorothiazide (HCT) with total-overlapped spectra. Induced dual wavelength, absorbance correction and ratio subtraction coupled with constant multiplication methods were applied to Mix I _(OLM/ADB), while dual wavelength, advanced absorbance subtraction and constant center coupled with spectrum subtraction methods were applied to Mix II _(TEL/HCT). Calibration graphs were established with good correlation coefficients. The methods exhibit significant advantages as simplicity, sensitivity, minimal data manipulation besides optimum robustness. Selectivity was inspected using lab-mixtures with diverse ratios. Accuracy, precision and repeatability were found to be within the acceptable limits. The proposed methods are good enough to be used for co-assay of analytes in combined forms without any interfering from excipients. Moreover, all results were estimated in accordance with ICH criteria and successfully compared with those of the reported methods applying t-test and F-test at 95% confidence level. Generally, these methods can be used efficiently for routine quality control testing.

A novel stability-indicating method for determination of a new antidepressant effect of vortioxetine in a pharmaceutical formulation by using RP-HPLC

Background

A novel rapid, accurate, and stability-indicating reversed-phase high performance liquid chromatographic (RP-HPLC) and first derivative spectrophotometric determination were explained for the assay of vortioxetine (VRT) in bulk and pharmaceutical formulations. For RP-HPLC method, optimal separation and determination of VRT were achieved with a Waters Symmetry C18, (100 × 4.6 mm, 3.5 μm) analytical column using a mobile phase consisting of methanol:0.05 M potassium dihydrogen phosphate (pH:3.0 ± 0.05) (30:70, v/v) in isocratic mode with flow rate of 1.3 mL min−1. Injection volume was 20 μL. The maximum absorption wavelength of VRT is 225.0 nm; hence, 225.0 nm was studied as the detection wavelength and column at 50 °C temperature. The caffeine was used as the internal standard (IS). On the other hand, the first derivative spectrophotometric method for the analysis of vortioxetine was performed by measuring the amplitude at 251.7 and 272.6 nm.

Result

The HPLC method was found to be linear in the concentration ranges of 10.0-70.0 μg mL−1 with the coefficient value R2 of 0.9998, and the mean recovery value was 100.7%. Further stability studies were done through exposure of the analyte solutions to various stress conditions: acid, alkali hydrolysis, chemical oxidation, and exposure to UV radiation. For the first derivative spectrophotometric method, linearity was observed in the concentration range 6.0-30.0 μg mL−1 (for 237.7 nm R2 = 0.9999 and for 257.2 nm R2 = 0.9997).

Conclusion

The methods were validated in accordance with ICH guidelines with respect to linearity, accuracy, specificity, limit of detection, precision, and limit of quantification.