Retrospective suspect and non-target screening combined with similarity measures to prioritize MDMA and amphetamine synthesis markers in wastewater

3,4-Methylenedioxymethamphetamine (MDMA) and amphetamine are commonly used psychoactive stimulants. Illegal manufacture of these substances, mainly located in the Netherlands and Belgium, generates large amounts of chemical waste which is disposed in the environment or released in sewer systems. Retrospective analysis of high-resolution mass spectrometry (HRMS) data was implemented to detect synthesis markers of MDMA and amphetamine production in wastewater samples. Specifically, suspect and non-target screening, combined with a prioritization approach based on similarity measures between detected features and mass loads of MDMA and amphetamine was implemented. Two hundred and thirty-five 24 h-composite wastewater samples collected from a treatment plant in the Netherlands between 2016 and 2018 were analyzed by liquid chromatography coupled to high-resolution mass spectrometry. Samples were initially separated into two groups (i.e., baseline consumption versus dumping) based on daily loads of MDMA and amphetamine. Significance testing and fold-changes were used to find differences between features in the two groups. Then, associations between peak areas of all features and MDMA or amphetamine loads were investigated across the whole time series using various measures (Euclidian distance, Pearson's correlation coefficient, Spearman's rank correlation coefficient, distance correlation and maximum information coefficient). This unsupervised and unbiased approach was used for prioritization of features and allowed the selection of 28 presumed markers of production of MDMA and amphetamine. These markers could potentially be used to detect dumps in sewer systems, help in determining the synthesis route and track down the waste in the environment.

What is the future of illicit drug profiling in Switzerland? Condemned to disappear or forgotten treasure

Illicit drug profiling bears a long history. Developments in the field from mid-90s have led to several international profiling programs. Several countries have put their efforts to develop and implement the routine use of illicit drug profiling in the investigation and prosecution of illicit drug-related crimes. For more than 20 years, the School of Criminal Sciences (ESC) at the University of Lausanne has, through its illicit drug expertise laboratory, played a main role in promoting the use of illicit drug profiling. In Switzerland, there is no national illicit drug profiling practice and the ESC laboratory is the only one offering such service. However, only a limited number of Swiss jurisdictions send regularly all or part of their seized specimens for analysis to the ESC laboratory. Profiling results are furnished to investigators and prosecutors regardless if they have been requested or not and are stored in a database with limited contextual information with no further data treatment. In 2020, the interruption of a project intended to develop and implement an intercantonal database gathering traditional police data, forensic data (e.g., DNA, fingerprints, etc.), and physical and chemical links, to produce intelligence and support investigation, led to the fundamental question: Is illicit drug profiling in Switzerland condemned to disappear or is it a forgotten treasure, a neglected approach that deserves to be revalued? This paper reports the Swiss situation regarding illicit drug profiling practices and discusses some factors that are thought to impact its use in day-to-day work.

Illicit drug profiling practices in Finland: An exploratory study about end users' perceptions

Illicit drug profiling (i.e. chemical and/or physical profiling) to compare and relate illicit drugs samples has been actively used in routine case work at the National Bureau of Investigation (NBI) in Finland. This preliminary and exploratory work reviews NBI's illicit drug profiling practices. Particular emphasis is put on communication of forensic results and how the NBI has promoted the use of forensic data in an intelligence perspective by establishing a case coordination service. Moreover, our study evaluates the comprehension, integration and usefulness of illicit drug profiling from end users' point of view by means of an online survey and face-to-face interviews. Findings are compared with theoretical aspects as described in literature. Results show that in the Finnish context illicit drug profiling is used and useful in the investigation and in court. From end users' perspective, real practical relevance relies in its use as intelligence during the investigation. However, to be truly useful, illicit drug profiling results must be communicated promptly during the investigation, with sufficient clarity and interpreted correctly by end users. Factors influencing the integration of illicit drug profiling in the forensic process are addressed.

New perspective for the in-field analysis of cannabis samples using handheld near-infrared spectroscopy: A case study focusing on the determination of Δ9-tetrahydrocannabinol

The aim of the present study was to explore the feasibility of applying near-infrared (NIR) spectroscopy for the quantitative analysis of Δ⁹-tetrahydrocannabinol (THC) in cannabis products using handheld devices. A preliminary study was conducted on different physical forms (entire, ground and sieved) of cannabis inflorescences in order to evaluate the impact of sample homogeneity on THC content predictions. Since entire cannabis inflorescences represent the most common types of samples found in both the pharmaceutical and illicit markets, they have been considered priority analytical targets. Two handheld NIR spectrophotometers (a low-cost device and a mid-cost device) were used to perform the analyses and their predictive performance was compared. Six partial least square (PLS) models based on reference data obtained by UHPLC-UV were built. The importance of the technical features of the spectrophotometer for quantitative applications was highlighted. The mid-cost system outperformed the low-cost system in terms of predictive performance, especially when analyzing entire cannabis inflorescences. In contrast, for the more homogeneous forms, the results were comparable. The mid-cost system was selected as the best-suited spectrophotometer for this application. The number of cannabis inflorescence samples was augmented with new real samples, and a chemometric model based on machine learning ensemble algorithms was developed to predict the concentration of THC in those samples. Good predictive performance was obtained with a root mean squared error of prediction of 1.75 % (w/w). The Bland-Altman method was then used to compare the NIR predictions to the quantitative results obtained by UHPLC-UV and to evaluate the degree of accordance between the two analytical techniques. Each result fell within the established limits of agreement, demonstrating the feasibility of this chemometric model for analytical purposes. Finally, resin samples were investigated by both NIR devices. Two PLS models were built by using a sample set of 45 samples. When the analytical performances were compared, the mid-cost spectrophotometer significantly outperformed the low-cost device for prediction accuracy and reproducibility.

Substances injected at the Sydney supervised injecting facility: A chemical analysis of used injecting equipment and comparison with self-reported drug type

Providing information about substances injected can reduce the negative impact of illicit drug consumption and support people who inject drugs to make informed decisions. In Australia, information about drugs injected relies largely on periodic self-report surveys. For the first time, the analysis of the residual content of used injecting equipment was conducted in a supervised injecting facility (SIF) located in Sydney, Australia. The aim was to gain a better understanding of the substances injected by clients through: (1) chemical analyses of the content of used syringes; (2) comparison of these results with clients' self-reported drug use; and (3) assessing the usefulness of analysing other injecting equipment to detect substances used. During one week in February 2019, syringes and other injecting equipment were collected at the Sydney SIF. Their residual content was analysed by gas-chromatography/mass-spectrometry. Heroin was the most commonly detected substance (present in 51% of syringes), followed by methamphetamine (22%) and oxycodone (10%). In addition to the main psychoactive substance, cutting agents reported in the literature were also detected in used syringes. The main psychoactive substance identified by laboratory analysis reliably corresponded with users' self-reported drug type. Analytical confirmation of substances injected allows for the provision of better targeted harm reduction messaging based on timely and objective data. The approach used is amenable to clients and feasible in the Australian SIF context. Upscaling and wider implementation could be done through Needle and Syringe Programs, and would support the early detection of harmful substances entering drug markets and better inform harm reduction strategies.

An insight into the sale of prescription drugs and medicine on the AlphaBay cryptomarket

Internet access has provided new ways to trade goods. Unlike conventional legal sale sites, cryptomarkets facilitate exchanges in a context where the anonymity of participants is warranted. The aim of this article was to obtain a better understanding of the trafficking of prescription drugs and medicine on the AlphaBay cryptomarket. The results showed that alprazolam, oxycodone, and Adderall were the most offered prescription drugs while alprazolam, diazepam, and oxycodone were the most sold substances. The sale was dominated by North America, Australia, and Western European countries. The revenue of prescription drugs was estimated to be more than US$65 million since the creation of AlphaBay, a small market in comparison with the worldwide legal pharmaceutical market’s estimate of US$1.3 trillion in 2020. Digital traces offer a complementary way to understand the trafficking of prescription drugs and medicine and to identify the most prolific vendors and their implication in this trafficking.

Monitoring of explosive residues in lake-bottom water using Polar Organic Chemical Integrative Sampler (POCIS) and chemcatcher: determination of transfer kinetics through Polyethersulfone (PES) membrane is crucial

Between 1920 and 1967, approximatively 8200 tons of ammunition waste were dumped into some Swiss lakes. This study is part of the extensive historical and technical investigations performed since 1995 by Swiss authorities to provide a risk assessment. It aims to assess whether explosive monitoring by passive sampling is feasible in lake-bottom waters. Polar organic chemical integrative sampler (POCIS) and Chemcatcher were first calibrated in a channel system supplied with continuously refreshed lake water spiked with two nitroamines (HMX and RDX), one nitrate ester (PETN), and six nitroaromatics (including TNT). Exposure parameters were kept as close as possible to the ones expected at the bottom of two affected lakes. Sixteen POCIS and Chemcatcher were simultaneously deployed in the channel system and removed in duplicates at 8 different intervals over 21 days. Sorbents and polyethersulfone (PES) membranes were separately extracted and analyzed by UPLC-MS/MS. When possible, a three-compartment model was used to describe the uptake of compounds from water, over the PES membrane into the sorbent. Uptake of target compounds by sorbents was shown not to approach equilibrium during 21 days. However, nitroaromatics strongly accumulated in PES, thus delaying the transfer of these compounds to sorbents (lag-phase up to 9 days). Whereas sampling rate (R_S) of nitroamines were in the range of 0.06-0.14 L day^-1, R_S of nitroaromatics were up to 10 times lower. As nitroaromatic accumulation in PES was integrative over 21 days, PES was used as receiving phase for these compounds. The samplers were then deployed at lake bottoms. To ensure that exposure conditions were similar between calibration and field experiments, low-density polyethylene strips spiked with performance reference compounds were co-deployed in both experiments and dissipation data were compared. Integrative concentrations of explosives measured in the lakes confirmed results obtained by previous studies based on grab sampling.

When does the cutting of cocaine and heroin occur? The first large-scale study based on the chemical analysis of cocaine and heroin seizures in Switzerland

BACKGROUND

Illicit drug profiling can provide knowledge about illicit drug markets, informing on the level of distribution and its evolution in space and time. Illicit drug profiling is usually limited to impurities originally present in the illicit drug (e.g. alkaloids, co-extracted compounds or by-products). However, the benefit of a comprehensive analysis of cutting agents in drug seizures for law enforcement agencies, intelligence and health policy has not been thoroughly investigated in the literature and is the focus of this research.

AIM

This research aims at assessing when and how cutting (i.e. adulteration and dilution) occurs in the supply chain by analysing cocaine and heroin seizures made between 2006 and 2015 in Switzerland.

METHODS

Cocaine and heroin seizures made along the supply chain by law enforcement agencies in the Western region of Switzerland were investigated for adulteration and dilution. A total number of 7841 cocaine and 3476 heroin specimens coming from 1341 and 721 seizures, respectively, were analysed.

RESULTS

The results show that, for both illicit drugs, adulteration and/or dilution occur before arrival into Switzerland as well as in Switzerland. While cocaine is adulterated and diluted, heroin is only adulterated. Interestingly, the same mixture of adulterants (i.e. caffeine-paracetamol) is used to cut heroin at each step in the supply chain.

CONCLUSION

Gaining knowledge about adulteration and dilution at different stages in the supply chain enhances our understanding of drug markets. It also highlights differences along the supply chain and in the distribution of both drugs in Switzerland.

Forensic intelligence on illicit markets: The example of watch counterfeiting

Counterfeit luxury fashion goods have rarely been the subject of scientific studies. Very little is known about the mechanisms of this illicit market despite the apparent prevalence and their adverse consequences. Counterfeit watches remain one of the preferred targets in the luxury goods segment. The study of marks or traces in a forensic intelligence perspective can contribute to an improved understanding of the phenomenon. The aim of our research was to highlight different types of links that can be drawn between specimens of counterfeit watches, to carry out a thorough study of the information conveyed by the revealed links, to study their complementarity and to get an understanding of the intelligence that can be produced from these pieces of information. Thirty-five counterfeit watches of a commonly counterfeit watch brand including seven popular models were studied in this research. Chemical and physical links were found that corroborated existing knowledge and also revealed new connections between different seizures or specimens. The comparison of chemical and physical features combined with spatiotemporal information on the seized watches enabled us to produce intelligence disclosing possible aspects of the structure and the organisation of production and distribution channels. We were able to reveal or confirm links between watches that were previously unknown or uncertain and demonstrated the interconnection of all watches on a chemical and/or physical level, suggesting an overhead organised network with substructures. Despite the limited set of specimens that was considered, this study illustrates that forensic intelligence on this illicit market can be used to support consistent decision-making from all the key-players involved in the anti-counterfeiting process.

Elemental analysis for profiling counterfeit watches

Counterfeit watches are products of illicit activity and contain traces of their production and distribution. Traces provide pertinent information through one of their fundamental characteristics: the ability to reveal links between specimens or cases. The aim of this study was to develop an analytical strategy to obtain the elemental composition of watchcases, by analysing a selection of 35 counterfeit watches. We propose a methodology based on multivariate statistical analysis of chemical results that discriminates between watches from common and different origins, and, ultimately, classifies them into chemical groups. All watchcases were analysed using inductively coupled plasma mass spectrometry (ICP-MS), providing representative descriptive data on the composition of watchcases. Several multivariate approaches were assessed, considering different scenarios, each using a different set of variables. It appeared that the model that performed best in terms of classification criteria could be misleading, especially in an exploratory context that focuses on the production of intelligence. At the end of the day, hierarchical cluster analysis (HCA) allowed us to classify the specimens into 14 chemical classes. Information gained through chemical analysis revealed several links between the specimens. This initial study was performed on a very limited number of watches. Although still in the developmental stage, our approach exhibits promising capabilities and encourages chemical profiling of counterfeit watches on larger scale.

The use of wastewater analysis in forensic intelligence: drug consumption comparison between Sydney and different European cities

Wastewater analysis offers objective and complementary information to illicit drug agencies by monitoring patterns of illicit drug consumption. In this study, wastewater samples from three different wastewater treatment plants in Sydney, Australia were collected in March 2016. Ten targeted drugs were analysed and temporal and geographical analyses were performed to obtain a better understanding of the type and amount of illicit drugs consumed in Sydney in comparison with similar studies conducted around Australia and in Europe. Among the targeted drugs, methamphetamine was consumed the most, followed by cocaine and 3,4-methylenedioxymethamphetamine (MDMA). Weekly patterns were observed where a peak during the weekend was present. The geographical analysis showed differences between the regions targeted. This observation may be related to socio-demographic aspects. The comparison of our study to other data sources from Australia showed a high consumption of methamphetamine in Sydney and Western Australia. The comparison between Sydney and different European cities revealed a difference in consumption, which is in line with traditional market indicators. The information obtained through wastewater analysis provides complementary information regarding illicit drug consumption, the size, and the evolution of the illicit drug market. This, ultimately, will assist authorities in making informed decisions.

Levels of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) in raw wastewater as an innovative perspective for investigating population-wide exposure to third-hand smoke

Tobacco smoking is the major cause of many chronic diseases, especially lung cancer. Knowledge about population-wide tobacco use and exposure is essential to characterise its burden on public health and evaluate policy efficacy. Obtaining such knowledge remains challenging with current methods (e.g., surveys, biomonitoring) but can be achievable with wastewater analysis, a promising tool of retrieving epidemiology information. This study examined population-wide exposure to tobacco toxicants and carcinogens through wastewater analysis and explored relationships among these chemicals. Cotinine, trans-3'-hydroxycotinine, anabasine, anatabine and 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) were analysed in samples from Greece, Switzerland and Belgium, where tobacco control policies are different. Measured per-capita mass loads were ranked as: nicotine biomarkers ≫ tobacco markers > carcinogens. Relationships between nicotine biomarkers and tobacco markers implied substantial use of non-tobacco nicotine items besides tobacco products. Geographic profiles of tobacco markers revealed higher levels in Geneva and Athens than Geraardsbergen and Ninove. Environmental third-hand smoke led to NNK detection, with elevated levels observed in Athens where indoor smoking is widespread, posing potential health risks to the population. Our novel outcomes are relevant for public health authorities as they provide indications about external exposure and can thus be used to plan and evaluate tobacco control policies.

Mining the Chemical Information on Urban Wastewater: Monitoring Human Exposure to Phosphorus Flame Retardants and Plasticizers

At the individual level, exposure to contaminants is generally assessed through the analysis of specific biomarkers in biological matrices. However, these studies are costly and logistically demanding, limiting their applicability to monitor population-wide exposure over time and space. By focusing on a selection of exposure biomarkers to phosphorus flame retardants and plasticizers (PFRs), this study aims to explore the possibility of using wastewater as a complementary source of information about exposure. Wastewater samples were collected from five cities in Europe and analyzed using a previously established method. Substantial differences in biomarker levels were observed between the investigated catchments, suggesting differences in exposure. Time trends in biomarkers observed between 2013 and 2016 were found to agree with results from human biomonitoring studies and reports about production volumes. Using Monte Carlo simulations, average urinary concentrations were estimated. These were generally higher compared to results from human biomonitoring studies. Various explanations for these differences were formulated (i.e., other excretion routes, external sources and different sampling approaches). Obtained results show that wastewater analysis provides unique information about geographical and temporal differences in exposure, which would be difficult to gather using other monitoring tools.

Forensic drug intelligence and the rise of cryptomarkets. Part II: Combination of data from the physical and virtual markets

Technology provides new ways to access customers and suppliers while enhancing the security of off-line criminal activity. Since the first cryptomarket, Silk Road, in 2011, cryptomarkets have transformed the traditional drug sale by facilitating the creation of a global network of vendors and buyers. Due to the fragmented nature of traces that result from illegal activities, combining the results of concurrent processes based on traces of different nature should provide supplementary benefit to understand the drug market. This article compares the data of the Australian virtual market (in particular data extracted from cryptomarkets) to the data related to traditional market descriptors, namely national seizures and arrests, prevalence data, shipping countries of seized post shipments as well as outcomes of specific surveys targeting users' behaviour online. Results revealed the domestic nature of the online illicit drug trade in Australia which is dominated by amphetamine-type substances (ATS), in particular methylamphetamine and cannabis. These illicit drugs were also the most seized drugs on the physical market. This article shows that the combination of different information offers a broader perspective of the illicit drug market in Australia and thus provides stronger arguments for policy makers. It also highlights the links between the virtual and physical markets.

An in-situ assessment of low-density polyethylene and silicone rubber passive samplers using methods with and without performance reference compounds in the context of investigation of polychlorinated biphenyl sources in rivers

This study firstly aims to assess the field performances of low density polyethylene (LDPE) and silicone rubber (SR) samplers for the monitoring of polychlorinated biphenyls (PCBs) in water regarding the uptake, the sampling rate (R_S) estimated by using performance reference compounds (PRCs) and the time-weighted average (TWA) concentrations. The second aim is to evaluate the efficiency of these samplers to investigate PCB sources (localization and imputation steps) using methods with and without PRCs to correct for the impact of water velocity on the uptake. Samplers spiked with PRCs were deployed in the outfalls of two PCB sources and at 8 river sites situated upstream and downstream of the outfalls. After 6weeks, the uptake of PCBs in the linear phase was equivalent in LDPE and SR but 5 times lower in LDPE for PCBs approaching equilibrium. PRC-based R_S and water velocity (0.08 to 1.21ms^-1) were well correlated in river (LDPE: R²=0.91, SR: R²=0.96) but not in outfalls (higher turbulences and potential release of PRCs to air). TWA concentrations obtained with SR were slightly higher than those obtained with LDPE (factor 1.4 to 2.6 in river) likely because of uncertainty in sampler-water partition coefficient values. Concentrations obtained through filtration and extraction of water samples (203L) were 1.6 and 5.1 times higher than TWA concentrations obtained with SR and LDPE samplers, respectively. PCB sources could efficiently be localized when PRCs were used (increases of PCB loads in river) but the impact of high differences of water velocity was overcorrected (leading sometimes to false positives and negatives). Increases of PCB loads in the river could not be entirely imputed to the investigated sources (underestimation of PCBs contributing to the load increases). A method without PRCs (relationship between uptake and water velocity) appeared to be a good complementary method for LDPE.

Analysis of residual content of used syringes collected from low threshold facilities in Lausanne, Switzerland

BACKGROUND

For the first time in Switzerland, an analysis of residual contents from used syringes collected from low threshold facilities was performed. This preliminary study is part of a wider project aiming to understand patterns of injecting drug use over time.

METHODS

Among the 100,000 syringes exchanged annually by the ABS foundation (Accueil Bas Seuil), 113 were collected following a purposive sampling method and analysed by gas chromatography coupled with mass spectrometry (GC-MS).

RESULTS

Four syringes (4% of the sample population) contained no substances take into consideration the limit of the method. Cocaine was the most commonly observed compound and was detected in 77 syringes (68%), whilst users reported syringes with cocaine among those analysed in this study. Heroin was detected in 49 syringes (43%) and reported by 53 users returning syringes; midazolam was detected in 31 syringes (27%) and reported as the medicine Dormicum(®) in 22 occurrences. No new or unusual illicit drug was detected in the sample.

CONCLUSION

The results show the presence of cocaine in more than half of the sample, an absence of new or unusual illicit drugs, as well as very few traces of methadone, which suggests that this substitution drug is rarely injected. This preliminary study also demonstrates the potential of this developed methodology for monitoring purposes. An ongoing and more systematic approach could allow to detect modifications in drug use patterns among the target population as well as the appearance of new and hazardous substances. Such systematic and timely results could allow an adaptation of harm reduction interventions.

Classification of Coffee Beans by GC-C-IRMS, GC-MS, and (1)H-NMR

In a previous work using (1)H-NMR we reported encouraging steps towards the construction of a robust expert system for the discrimination of coffees from Colombia versus nearby countries (Brazil and Peru), to assist the recent protected geographical indication granted to Colombian coffee in 2007. This system relies on fingerprints acquired on a 400 MHz magnet and is thus well suited for small scale random screening of samples obtained at resellers or coffee shops. However, this approach cannot easily be implemented at harbour's installations, due to the elevated operational costs of cryogenic magnets. This limitation implies shipping the samples to the NMR laboratory, making the overall approach slower and thereby more expensive and less attractive for large scale screening at harbours. In this work, we report on our attempt to obtain comparable classification results using alternative techniques that have been reported promising as an alternative to NMR: GC-MS and GC-C-IRMS. Although statistically significant information could be obtained by all three methods, the results show that the quality of the classifiers depends mainly on the number of variables included in the analysis; hence NMR provides an advantage since more molecules are detected to obtain a model with better predictions.

Assessing geographical differences in illicit drug consumption--A comparison of results from epidemiological and wastewater data in Germany and Switzerland

BACKGROUND

Wastewater analysis is an innovative approach that allows monitoring illicit drug use at the community level. This study focused on investigating geographical differences in drug consumption by comparing epidemiological, crime and wastewater data.

METHODS

Wastewater samples were collected in 19 cities across Germany and Switzerland during one week, covering a population of approximately 8.1 million people. Self-report data and consumption offences for the investigated areas were used for comparison and to investigate differences between the indicators.

RESULTS

Good agreement between data sources was observed for cannabis and amphetamine-type stimulants, whereas substantial discrepancies were observed for cocaine. In Germany, an important distinction could be made between Berlin, Dortmund and Munich, where cocaine and particularly amphetamine were more prevalent, and Dresden, where methamphetamine consumption was clearly predominant. Cocaine consumption was relatively homogenous in the larger urban areas of Switzerland, although prevalence and offences data suggested a more heterogeneous picture. Conversely, marked regional differences in amphetamine and methamphetamine consumption could be highlighted.

CONCLUSIONS

Combining the available data allowed for a better understanding of the geographical differences regarding prevalence, typology and amounts of substances consumed. For cannabis and amphetamine-type stimulants, the complementarity of survey, police and wastewater data could be highlighted, although notable differences could be identified when considering more stigmatised drugs (i.e. cocaine and heroin). Understanding illicit drug consumption at the national scale remains a difficult task, yet this research illustrates the added value of combining complementary data sources to obtain a more comprehensive and accurate picture of the situation.

Qualitative, quantitative and temporal study of cutting agents for cocaine and heroin over 9 years

Forensic laboratories mainly focus on the qualification and the quantitation of the illicit drug under analysis as both aspects are used for judiciary purposes. Therefore, information related to cutting agents (adulterants and diluents) detected in illicit drugs is limited in the forensic literature. This article discusses the type and frequency of adulterants and diluents detected in more than 6000 cocaine specimens and 3000 heroin specimens, confiscated in western Switzerland from 2006 to 2014. The results show a homogeneous and quite unchanging adulteration for heroin, while for cocaine it could be characterised as heterogeneous and relatively dynamic. Furthermore, the results indicate that dilution affects more cocaine than heroin. Therefore, the results provided by this study tend to reveal differences between the respective structures of production or distribution of cocaine and heroin. This research seeks to promote the systematic analysis of cutting agents by forensic laboratories. Collecting and processing data related to the presence of cutting agents in illicit drug specimens produces relevant information to understand and to compare the structure of illicit drug markets.

Data triangulation in the context of opioids monitoring via wastewater analyses

BACKGROUND

The need to contextualise wastewater-based figures about illicit drug consumption by comparing them with other indicators has been stressed by numerous studies. The objective of the present study was to further investigate the possibility of combining wastewater data to conventional statistics to assess the reliability of the former method and obtain a more balanced picture of illicit drug consumption in the investigated area.

METHODS

Wastewater samples were collected between October 2013 and July 2014 in the metropolitan area of Lausanne (226,000 inhabitants), Switzerland. Methadone, its metabolite 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP), the exclusive metabolite of heroin, 6-monoacetylmorphine (6-MAM), and morphine loads were used to estimate the amounts of methadone and heroin consumed.

RESULTS

Methadone consumption estimated from EDDP was in agreement with the expectations. Heroin estimates based on 6-MAM loads were inconsistent. Estimates obtained from morphine loads, combined to prescription/sales data, were in agreement with figures derived from syringe distribution data and general population surveys.

CONCLUSIONS

The results obtained for methadone allowed assessing the reliability of the selected sampling strategy, supporting its ability to capture the consumption of a small cohort (i.e., 743 patients). Using morphine as marker, in combination with prescription/sales data, estimates in accordance with other indicators about heroin use were obtained. Combining different sources of data allowed strengthening the results and suggested that the different indicators (i.e., administration route, average dosage and number of consumers) contribute to depict a realistic representation of the phenomenon in the investigated area. Heroin consumption was estimated to approximately 13 gd ay(-1) (118 g day(-1) at street level).

Low density polyethylene (LDPE) passive samplers for the investigation of polychlorinated biphenyl (PCB) point sources in rivers

This study aims to provide a passive sampling approach which can be routinely used to investigate polychlorinated biphenyl (PCB) sources in rivers. The approach consists of deploying low density polyethylene (LDPE) strips downstream and upstream of potential PCB sources as well as in their water discharges. Concentrations of indicator PCBs (iPCBs) absorbed in samplers (Cs) from upstream and downstream sites are compared with each other to reveal increases of PCB levels. Cs measured in water discharges are used to determine if released amounts of PCBs are compatible with increases revealed in the river. As water velocity can greatly vary along a river stretch and influences the uptake at each site in a different way, differences in velocity have to be taken into account to correctly interpret Cs. LDPE strips were exposed to velocities between 1.6 and 37 cm s−1 using a channel system built in the field. Relationships between velocity and Cs were established for each iPCB to determine the expected change in Cs due to velocity variations. For PCBs 28 and 52, this change does not exceed a factor 2 for velocity variations in the range from 1.6 to 100 cm s−1 (extrapolated data above 37 cm s−1). For PCBs 101, 138, 153 and 180, this change only exceeds a factor 2 in the case of large velocity variations. The approach was applied in the Swiss river Venoge to first conduct a primary investigation of potential PCB sources and then conduct thorough investigations of two suspected sources.

Effect of water velocity on the uptake of polychlorinated biphenyls (PCBs) by silicone rubber (SR) and low-density polyethylene (LDPE) passive samplers: an assessment of the efficiency of performance reference compounds (PRCs) in river-like flow conditions

One aim of this study is to determine the impact of water velocity on the uptake of indicator polychlorinated biphenyls (iPCBs) by silicone rubber (SR) and low-density polyethylene (LDPE) passive samplers. A second aim is to assess the efficiency of performance reference compounds (PRCs) to correct for the impact of water velocity. SR and LDPE samplers were spiked with 11 or 12 PRCs and exposed for 6 weeks to four different velocities (in the range of 1.6 to 37.7 cm s(-1)) in river-like flow conditions using a channel system supplied with river water. A relationship between velocity and the uptake was found for each iPCB and enables to determine expected changes in the uptake due to velocity variations. For both samplers, velocity increases from 2 to 10 cm s(-1), 30 cm s(-1) (interpolated data) and 100 cm s(-1) (extrapolated data) lead to increases of the uptake which do not exceed a factor of 2, 3 and 4.5, respectively. Results also showed that the influence of velocity decreased with increasing the octanol-water coefficient partition (log K(ow)) of iPCBs when SR is used whereas the opposite effect was observed for LDPE. Time-weighted average (TWA) concentrations of iPCBs in water were calculated from iPCB uptake and PRC release. These calculations were performed using either a single PRC or all the PRCs. The efficiency of PRCs to correct the impact of velocity was assessed by comparing the TWA concentrations obtained at the four tested velocities. For SR, a good agreement was found among the four TWA concentrations with both methods (average RSD<10%). Also for LDPE, PRCs offered a good correction of the impact of water velocity (average RSD of about 10 to 20%). These results contribute to the process of acceptance of passive sampling in routine regulatory monitoring programs.

Population normalization with ammonium in wastewater-based epidemiology: application to illicit drug monitoring

Fluctuations in ammonium (NH4+), measured as NH4-N loads using an ion-selective electrode installed at the inlet of a sewage treatment plant, showed a distinctive pattern which was associated to weekly (i.e., commuters) and seasonal (i.e., holidays) fluctuations of the population. Moreover, population size estimates based on NH4-N loads were lower compared to census data. Diurnal profiles of benzoylecgonine (BE) and 11-nor-9-carboxy-Δ9-tetrahydrocannabinol (THC-COOH) were shown to be strongly correlated to NH4-N. Characteristic patterns, which reflect the prolonged nocturnal activity of people during the weekend, could be observed for BE, cocaine, and a major metabolite of MDMA (i.e., 4-hydroxy-3-methoxymethamphetamine). Additional 24 h composite samples were collected between February and September 2013. Per-capita loads (i.e., grams per day per 1000 inhabitants) were computed using census data and NH4-N measurements. Normalization with NH4-N did not modify the overall pattern, suggesting that the magnitude of fluctuations in the size of the population is negligible compared to those of illicit drug loads. Results show that fluctuations in the size of the population over longer periods of time or during major events can be monitored using NH4-N loads: either using raw NH4-N loads or population size estimates based on NH4-N loads, if information about site-specific NH4-N population equivalents is available.

On the use of IRMS in forensic science: proposals for a methodological approach

The flourishing number of publications on the use of isotope ratio mass spectrometry (IRMS) in forensic science denotes the enthusiasm and the attraction generated by this technology. IRMS has demonstrated its potential to distinguish chemically identical compounds coming from different sources. Despite the numerous applications of IRMS to a wide range of forensic materials, its implementation in a forensic framework is less straightforward than it appears. In addition, each laboratory has developed its own strategy of analysis on calibration, sequence design, standards utilisation and data treatment without a clear consensus. Through the experience acquired from research undertaken in different forensic fields, we propose a methodological framework of the whole process using IRMS methods. We emphasize the importance of considering isotopic results as part of a whole approach, when applying this technology to a particular forensic issue. The process is divided into six different steps, which should be considered for a thoughtful and relevant application. The dissection of this process into fundamental steps, further detailed, enables a better understanding of the essential, though not exhaustive, factors that have to be considered in order to obtain results of quality and sufficiently robust to proceed to retrospective analyses or interlaboratory comparisons.