Diopside-tricalcium phosphate bioactive ceramics for osteogenic differentiation of human adipose stem cells

Ti scaffolds combined with autologous human adipose-derived mesenchymal stem cells (hASCs) have been successfully applied for regenerative cranio-maxillofacial bone therapies. Future challenges reside in regeneration of larger bone defects and displacement of the permanent Ti structure, thus, advanced resorbable scaffolds are needed. Composites of β-Ca₃ (PO₄ )₂ with 80 and 60 wt % of CaMg(SiO₃ )₂ with improved mechanical properties compared to tricalcium phosphate (TCP) materials are presented. Synthetic CaMg(SiO₃ )₂ and a precursor of Ca₃ (PO₄ )₂ were used to fabricate the composites and a reference β-Ca₃ (PO₄ )₂ material by uniaxial pressing and solid state sintering. Optimum sintering temperature of 1225°C was selected. Microstructural analysis and Weibull distributions of tensile strengths determined by the diametral compression of discs test are reported. Thermodynamic simulation of the dissolution process in simulated body fluid body fluid was done. The biological response with hASCs was analyzed using basic and osteogenic media. Viability and osteogenic potential-LIVE/DEAD assay; alkaline phosphatase activity and collagen type-I production-were characterized. The composites have higher tensile strength (>3×) than TCP materials, for similar reliability, and support viability and osteogenic differentiation of hASCs. Resorption of the high strength phase diopside is the slowest. The promising results reported here suggest possible uses of these bioactive β-Ca₃ (PO₄ )₂ -CaMg(SiO₃ )₂ ceramics together with hASCs in bone tissue engineering.

Effect of graphene on setting and mechanical behaviour of tricalcium phosphate bioactive cements

The potential reinforcing effect of graphene on calcium phosphate cements (CPCs) for injectable bone substitutes and scaffolds is presented. The influence of graphene (0-3.84 vol%) on the microstructural development during setting and the resultant mechanical properties of CPCs constituted by α + β-tricalcium phosphate is analysed. Optimum setting conditions were established using uniaxial compression strength of CPC and composites with pristine and functionalized graphene and liquid/solid ratios (L/S = 0.5-0.6 mL/g) that allowed the mixing and spatulation of the powders. Tensile strength of optimised materials has been determined using the Diametric Compression of Discs Test (DCDT). X-ray diffraction, Raman spectroscopy and FE-SEM-EDS on fracture surfaces were used to investigate phase composition and morphological changes in set specimens. Strengthening occurs for functionalized graphene additions up to 1.96 vol% due to different toughening mechanisms. Crack deflection, bridging and branching by graphene and, finally, the pull-out of the unbroken graphene sheets have been identified. Interlayer sliding between the graphene before pulling-out is an additional toughening process. Main effect of graphene on strength is the increase of reliability.

In vitro study of the proliferation and growth of human fetal osteoblasts on Mg and Si co-substituted tricalcium phosphate ceramics

The objective of this work was to study the feasibility of the solid state sintering, a conventional ceramic processing method, to obtain Mg and Si co-substituted tricalcium phosphate bioceramics and composites containing diopside. A series of new Ca₃ (PO₄ )₂ based ceramics has been prepared from attrition milled mixtures of synthetic Ca₃ (PO₄ )₂ and CaMg(SiO₃ )₂ powders, isostatically pressed and sintered at 1250-1300°C. Materials containing 0, 1, and 5 wt % of CaMg(SiO₃ )₂ were constituted by β + α - Ca₃ (PO₄ )₂ solid solutions while the material containing 60 wt % of CaMg(SiO₃ )₂ was a constituted by β- Ca₃ (PO₄ )₂ and CaMg(SiO₃ )₂ . The biological responses of the developed ceramics were studied in vitro using human fetal osteoblast cultures. Culture times ranged from 1 to 21 days. The new family of materials promotes the adhesion and proliferation of human osteoblasts cultured onto their surface forming a monolayer and showing a normal morphology. The results of the MTT and Alamar Blue assays showed that the soluble components extracted from the Mg/Si- co-substituted Ca₃ (PO₄ )₂ and the Ca₃ (PO₄ )₂ -CaMg(SiO₃ )₂ composite were noncytotoxic. The specimens with diopside exhibited a better in vitro behavior which is attributed to the release of Si and Mg ions to the culture medium, enhancing the activity of cells. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2266-2275, 2017.

Effect of Mg and Si co-substitution on microstructure and strength of tricalcium phosphate ceramics

Magnesium and silicon co-doped tricalcium phosphate (TCP) ceramics with compositions corresponding to 0, 5 and 10wt% CaMg(SiO3)2 in the system Ca3(PO4)2-CaMg(SiO3)2 were obtained by conventional sintering of compacted mixtures of Ca3(PO4)2, MgO, SiO2 and CaCO3 powders at temperatures between 1100 and 1450°C. Microstructural analyses were performed by X-ray diffraction and field emission scanning electron microscopy with energy dispersive spectroscopy. Major phases in the obtained ceramics were β- or α+β-tricalcium phosphate containing Mg and Si in solid solution. Certain amounts of liquid were formed during sintering depending on composition and temperature. There were found significant differences in distributions of strength determined by the diametral compression of disc tests (DCDT). Failure strengths were controlled by microstructural defects associated with phase development. Mg and Si additions were found to be effective to improve densification and associated strength of TCP bioceramics due to the enhancement of sintering by the low viscosity liquids formed. The highest density and strength were obtained for the TCP ceramic containing 5wt% CaMg(SiO3)2 sintered at 1300°C. Cracking and porosity increased at higher temperatures due to grain growth and swelling.

Structure and properties of bioactive eutectic glasses based on the Ca3(PO4)2-CaSiO3-CaMg(SiO3)2 system

Taking into account the phase equilibrium relationships within the Ca3(PO4)2-CaSiO3-CaMg(SiO3)2 ternary system, three bioactive glasses with a eutectic composition and analogous amounts of Ca3(PO4)2 (∼40 wt.%) have been prepared. The structure of the glasses was investigated by 31P and 29Si magic angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy. The glasses exhibited thermal expansion coefficients (50-600 °C) of 11.8-13.3×10(-6) °C(-1), a glass transition temperature of 790-720 °C and a softening temperature of 811-750 °C. The mechanical properties of the glasses were as follows: bending strength ∼100 MPa, Young's modulus 94-83 GPa, Vickers microhardness 7.1-4.1 GPa and toughness 0.8 MPa m1/2. The bioactive properties were discussed in terms of their structure deduced by MAS-NMR spectroscopy and the field strength of the network modifiers (Mg2+ and Ca2+). A knowledge of the glass structure was important in predicting its bioactivity.

Isotropic micropatterned silica coatings on zirconia induce guided cell growth for dental implants

Titanium implants are the gold standard in dentistry; however, problems such as gingival tarnishing and peri-implantitis have been reported. For zirconia to become a competitive alternative dental implant material, surface modification techniques that induce guided tissue growth must be developed.

OBJECTIVES

To develop alternative surface modification techniques to promote guided tissue regeneration on zirconia materials, for applications in dental implantology.

METHODS

A methodology that combined soft lithography and sol-gel chemistry was used to obtain isotropic micropatterned silica coatings on yttria-stabilized zirconia substrates. The materials were characterized via chemical, structural, surface morphology approaches. In vitro biological behavior was evaluated in terms of early adhesion and viability/metabolic activity of human osteoblast-like cells. Statistical analysis was conducted using one-way ANOVA/Tukey HSD post hoc test.

RESULTS

Isotropic micropatterned silica coatings on yttria-stabilized zirconia substrates were obtained using a combined approach based on sol-gel technology and soft lithography. Micropatterned silica surfaces exhibited a biocompatible behavior, and modulated cell responses (i.e. inducing early alignment of osteoblast-like cells). After 7d of culture, the cells fully covered the top surfaces of pillar microstructured silica films.

SIGNIFICANCE

The micropatterned silica films on zirconia showed a biocompatible response, and were capable of inducing guided osteoblastic cell adhesion, spreading and propagation. The results herein presented suggest that surface-modified ceramic implants via soft lithography and sol-gel chemistry could potentially be used to guide periodontal tissue regeneration, thus promoting tight tissue apposition, and avoiding gingival retraction and peri-implantitis.

Influence of design on bioactivity of novel CaSiO3-CaMg(SiO3)2 bioceramics: in vitro simulated body fluid test and thermodynamic simulation

A new type of bioactive ceramic has been designed and obtained from high-temperature phase information from the wollastonite (CaSiO(3))-diopside (CaMg(SiO(3))(2)) phase equilibrium diagram. The selected composition was that corresponding to the eutectic point of the pseudobinary CaSiO(3)-CaMg(SiO(3))(2) system. The sintering behaviour, phase evolution, microstructural changes and in vitro bioactivity of CaSiO(3)-CaMg(SiO(3))(2) eutectic bioceramics were analysed by differential thermal analysis, X-ray diffraction, field emission scanning electron microscopy (FE-SEM) and image analysis. A simulation of the dissolution properties of the different materials studied, in water as well as in simulated body fluid (SBF), was also carried out by thermodynamic calculations, with the purpose of understanding the in vitro results obtained. The results demonstrate that the CaMg(SiO(3))(2) is significantly less soluble than CaSiO(3), developing an in situ porous structure (biomimetic porous bone material) with adequate biodegradation rate and stability strength when immersed in SBF. The influence of the microstructure (porosity, grain size and phase composition) on the in vitro bioactivity of the obtained bioceramics was also examined.

In vitro study of the proliferation and growth of human bone marrow cells on apatite-wollastonite-2M glass ceramics

This study concerns the preparation and in vitro characterization of an apatite-wollastonite-2M bioactive glass ceramic which is intended to be used for the regeneration of hard tissue (i.e. in dental and craniomaxillofacial surgery). This bioglass ceramic has been obtained by appropriate thermal treatment through the devitrification (crystallization) of a glass with a stoichiometric eutectic composition within the Ca(3)(PO(4))(2)-CaSiO(3) binary system. Crack-free specimens of the bioglass ceramic were immersed in human bone marrow cell cultures for 3, 7, 14 and 21days, in order to study biocompatibility. Cell morphology, proliferation and colonization were assessed by scanning electron microscopy and confocal laser scanning microscopy. A total protein content assay was used to evaluate the viability and proliferation of cultured bone marrow cells. The results showed that the cells were able to adhere and proliferate on the designed material due to the essentiality of silicon and calcium as accessory factors for cell activity stimulation.

Devitrification studies of wollastonite-tricalcium phosphate eutectic glass

The present paper describes and discusses the devitrification and crystallization process of wollastonite-tricalcium phosphate (W-TCP) eutectic glass. This process was studied in situ from room temperature up to 1375 degrees C, by neutron diffractometry in vacuum. The data obtained were combined and compared with those performed in ambient atmosphere by differential thermal analysis and with those of samples fired in air at selected temperatures, and then cooled down and subsequently studied by laboratory XRD and field emission scanning electron microscopy fitted with energy X-ray dispersive spectroscopy. The experimental evidence indicates that the devitrification of W-TCP eutectic glass begins at approximately 870 degrees C with the crystallization of a Ca-deficient apatite phase, followed by wollastonite-2M (CaSiO(3)) crystallization at approximately 1006 degrees C. At 1375 degrees C, the bio-glass-ceramic is composed of quasi-rounded colonies formed by a homogeneous mixture of pseudowollastonite (CaSiO(3)) and alpha-tricalcium phosphate (Ca(3)(PO(4))(2)). This microstructure corresponds to irregular eutectic structures. It was also found that it is possible to obtain from the eutectic composition of the wollastonite-tricalcium phosphate binary system a wide range of bio-glass-ceramics, with different crystalline phases present, through appropriate design of thermal treatments.

Assessment of natural and synthetic wollastonite as source for bioceramics preparation

Pseudowollastonite ceramics (beta-CaSiO3) from synthetic and natural sources were assessed with regard to their properties relevant to biomedical applications. Synthetic and natural CaSiO3 powders, with average particle size of 1.6 and 13.2 microm, respectively, were first employed. Powders were pressed and sintered at 1400 degrees C for 2 h. Pseudowollastonite was the only crystalline phase in sintered materials. Glassy phase, eight times more abundant in sintered natural wollastonite (SNW) than in the synthetic one (SSW), was observed in grain boundaries and in triple points. Larger grains and bigger and more abundant pores were present in SNW, resulting in lower diametral tensile strength (26 MPa), than in SSW (42 MPa). However, by milling the natural wollastonite starting powder to a particle size of 2.0 microm and sintering (SNW-M), the microstructure became finer and less porous, and diametral tensile strength increased (48 MPa). Weibull modulus of SNW and SNW-M samples was twice that of the SSW. All the samples released Si and Ca ions, and removed phosphate ions from simulated body fluid in similar amounts and were completely coated by apatite-like spherules after soaking in simulated body fluid for 3 wk. The aqueous extracts from all samples studied were not cytotoxic in a culture of human fibroblastic cells. No differences in fibroblast-like human cells adhesion and proliferation were observed between samples. According to the obtained results, properly processed pseudowollastonite bioceramics, obtained from the natural source, exhibit the same in vitro behavior and better performance in terms of strength and reliability than do the more expensive synthetic materials.

Nucleolar localization of the microtubule-associated protein tau in neuroblastomas using sense and anti-sense transfection strategies

The Tau-1 monoclonal antibody was localized to the nucleolus of interphase cells and the nucleolar organizing regions (NORs) of acrocentric chromosomes in cultured human cells. Putative nucleolar and NOR tau was found in CG neuroblastoma cells which contain nucleolar tau and little cytoplasmic tau. To further establish the presence of tau in the nucleolus of these cells, sense and anti-sense transfection strategies were used. CG neuroblastoma cells were transfected with tau sense cDNA and immunostained with Tau-1. Cytoplasmic Tau-1 staining was greatly increased in CG cells which contain very little endogenous cytoplasmic tau. Nucleolar Tau-1 staining was also increased in certain CG cells indicating an increase in nucleolar tau in a subset of transfected cells. CG cells were also transfected with tau anti-sense cDNA which abolished Tau-1 staining in the nucleolus. These results contribute to a growing body of evidence defining tau as a multifunctional protein found in both the cytoplasm and nucleoli of primate cells.

Activator protein-2 mediates transcriptional activation of the CYP11A1 gene by interaction with Sp1 rather than binding to DNA

The ovine P45 side chain cleavage (CYP11A1) enzyme gene, which catalyzes the initial enzymatic step in steroid hormone biosynthesis is transcriptionally regulated in cultured steroidogenic human trophoblastic JEG-3 cells. The ovine CYP11A1 promoter contains two GC-rich footprinted regions referred to as ovine footprints 5 (OF5) and OF3, which are well conserved among the CYP11A1 promoters of different species. These GC-rich sequences resemble activator protein-2 (AP-2)/Sp1 binding sites and were previously implicated in basal and cAMP-regulated activity of the bovine and ovine CYP11A1 promoters. In the current studies, AP-2 induced the ovine CYP11A1 promoter 4.5-fold in JEG-3 cells with full induction requiring the previously defined cAMP-responsive elements. Point mutation of OF3 abolished induction by AP-2, and OF3 was sufficient for induction by AP-2 when linked to a heterologous promoter. AP-2 induction of the CYP11A1 promoter required the basic region (N165-N278) and the carboxy terminus of AP-2 (N413-N437). In the course of investigating the mechanisms by which OF5 and OF3 regulated CYP11A1 transcription, we found that OF5 and OF3 bound Sp1 and Sp3 in JEG-3 cells. AP-2 did not bind OF5 or OF3 directly but rather formed a multiprotein complex with Sp1 in JEG-3 cells. AP-2 associated directly with Sp1 in vitro requiring the AP-2 basic region and the Sp1 carboxy terminus. AP-2 induced Sp1/Sp3 activity independently of AP-2 binding to DNA using a GAL4 paradigm. The Sp1 and Sp3 transactivation domains were linked to the DNA-binding domain of GAL4, and their activity was assessed using a luciferase reporter gene containing only the GAL4 DNA-binding sites linked to the minimal TATA site. AP-2 induced Sp1/ Sp3-GAL4 activity 3- to 4-fold, requiring both the amino and extreme carboxy terminus of AP-2. We conclude that AP-2 can bind to and stimulate Sp1 activity and induces the ovine CYP11A1 promoter through conserved Sp1/Sp3-binding sites in JEG-3 cells. The induction of Sp1 activity by AP-2 may contribute to the induction of other genes that bind Sp1.

Regulation of cyclin dependent kinase inhibitor proteins during neonatal cerebella development

The cyclin dependent kinase holoenzymes (CDKs), composed of catalytic (cdk) and regulatory (cyclin) subunits, promote cellular proliferation and are inhibited by cyclin dependent kinase inhibitor proteins (CDKIs). The CDKIs include the Ink4 family (p15Ink4b, p16Ink4a, p18Ink4c, p19Ink4d) and the KIP family (p21Cip1 and p27Kip1). The sustained induction of p21 and p18 during myogenesis implicates these CDKI in maintaining cellular differentiation. Herein we examined the CDK (cyclin D1, cdk5) and CDKI expression profiles during the first 24 days of postnatal rat cerebella development. Cdk5 abundance increased and cyclin D1 decreased from day 9 through to adulthood. The CDKIs increased transiently during differentiation. p27 increased 20-fold between days 4 and 24, whereas p21 rose twofold between 6 to 11 days. p19, p18 and p16 increased approximately two- to threefold, falling to low levels in the adult. Immunostaining of cyclin D1 was localized in the external granular cells, whereas p27, was found primarily in the Purkinje cells. The period of maximal differentiation between days 9 to 13 was associated with a change in p21 and p16 staining from the external granular and Purkinje cells to a primarily Purkinje cell distribution. Protein-calorie malnutrition, which was previously shown to arrest rat cerebella development, reduced cyclin D1 kinase activity and p27 levels. However, p16 and p21 levels were unchanged. We conclude that the CDKIs are induced with distinct kinetics in specific cell types and respond differentially to growth factors during cerebella development, suggesting discrete roles for these proteins in normal cerebella development.

Adrenocorticotropin induction of stress-activated protein kinase in the adrenal cortex in vivo

A broad array of stressors induce ACTH release from the anterior pituitary, with consequent stimulation of the adrenal cortex and release of glucocorticoids critical for survival of the animal. ACTH stimulates adrenocortical gene expression in vivo and inhibits adrenocortical cell proliferation. Binding of ACTH to its G-protein-coupled receptor stimulates the production of cAMP and activation of the protein kinase A pathway. The stress-activated protein kinases (SAPKs) (or c-Jun N-terminal kinases) and the extracellular signal-regulated kinases (ERKs) are members of the mitogen-activated protein kinase family of serine/threonine kinases, which have recently been implicated in G-protein-coupled receptor intracellular signaling. The SAPKs are preferentially induced by osmotic stress and UV light, whereas the ERKs are preferentially induced by growth factors and proliferative signals in cultured cells. In these studies, ACTH stimulated SAPK activity 3-4-fold both in the adrenal cortex in vivo and in the Y1 adrenocortical cell line. 12-O-Tetradecanoylphorbol-13-acetate but not cAMP induced SAPK activity in Y1 cells. The isoquinolinesulfonamide inhibitors H-8 and H-89 blocked ACTH induction of SAPK activity at protein kinase C inhibitory doses but not at protein kinase A inhibitory doses. The calcium chelating agent EGTA inhibited ACTH-induced SAPK activity and the calcium ionophore A23187 induced SAPK activity 3-fold. In contrast with the induction of SAPK by ACTH, ERK activity was inhibited in the adrenal cortex in vivo and in Y1 adrenal cells. Together these findings suggest that ACTH induces SAPK activity through a PKC and Ca+2-dependent pathway. The induction of SAPK and inhibition of ERK by ACTH in vivo may preferentially regulate target genes involved in the adrenocortical stress responses in the whole animal.

An immunogenetically defined and immunodominant Trypanosoma cruzi antigen

Two strains of mice, A. SW (H-2s) and A.CA (H-2f), were immunized with live trypomastigotes or epimastigotes of the Tulahuen strain of Trypanosoma cruzi or with their sonicates. By immunowestern blotting, sera from A.SW mice, but not from A.CA, recognized, in an immunodominant fashion, a 45 kDal polypeptide (Tc45) present in both epimastigotes and trypomastigotes. Since A.SW and A.CA strains are congenic for the major histocompatibility H-2 complex, recognition of Tc45 seems to be controlled by this genetic region or by gene(s) located in its immediate vicinity. Subcellular fractionation revealed that Tc45 is mainly present at the cytoplasmic compartment.