Coherent Control of the Fine-Structure Qubit in a Single Alkaline-Earth Atom

We report on the first realization of a novel neutral atom qubit encoded in the spin-orbit coupled metastable states ^{3}P_{0} and ^{3}P_{2} of a single ^{88}Sr atom trapped in an optical tweezer. Raman coupling of the qubit states promises rapid single-qubit rotations on par with the fast Rydberg-mediated two-body gates. We demonstrate preparation, readout, and coherent control of the qubit. In addition to driving Rabi oscillations bridging an energy gap of more than 17 THz using a pair of phase-locked clock lasers, we also carry out Ramsey spectroscopy to extract the transverse qubit coherence time T_{2}. When the tweezer is tuned into magic trapping conditions, which is achieved in our setup by tuning the tensor polarizability of the ^{3}P_{2} state via an external control magnetic field, we measure T_{2}=1.2  ms. A microscopic quantum mechanical model is used to simulate our experiments including dominant noise sources. We identify the main constraints limiting the observed coherence time and project improvements to our system in the immediate future. Our Letter opens the door for a so-far-unexplored qubit encoding concept for neutral atom-based quantum computing.

Refractive index of graphene AA and AB stacked bilayers under the influence of relative planar twisting

The optical properties of graphene in monolayer and bilayer structure is essential for the development of optical devices viz surface plasmon resonance (SPR) based bio-sensors. The band structure of the twisted bilayer graphene (BLG) is remarkably different than the normal AA or AB stacking. This provides an opportunity to control the optical and electrical properties of BLG by applying an in-plane twist to one of the layer relative to other in a BLG system. Here, we calculated the refractive index (RI) of AA and AB stacking of BLG system using density functional theory. Though the spectrum for AA stacking shows some similarity with that of monolayer graphene, the spectrum for AB stacking was found to be remarkably different. The spectrum of AB stacked layer is red-shifted and the absorption peaks in low energy regime increases nearly by three-folds. A large dependency of the twist angle on RI of twisted BLG were found. Based on the calculation, a schematic of phase diagram showing material behavior of such twisted BLG systems as a function of twist angle and photon energy was constructed. The twisted AA stacked BLG shows largely dielectric behavior whereas the twisted AB stacked BLG shows predominately semimetallic and semiconducting behavior. This study presents a RI landscape of twisted BLG dependent on important parameters viz photon energy and inplane relative twist angle. Our studies will be very useful for the design and development of optical devices employing BLG systems particularly SPR based bio-sensors which essentially measures change in RI due to adsorption of analytes.

Impact of COVID-19 induced lockdown and unlock down phases on the ambient air quality of Delhi, capital city of India

The present study deals with the impact of the pandemic outbreak of COVID-19 on the ambient air quality in the capital city of India. Real-time data were collected from eight continuous ambient air quality monitoring stations measuring important air quality parameters (NO₂, PM₁₀ and PM_2.5). Results revealed that the city's air quality had improved significantly during the lockdown period due to COVID-19 outbreak. The concentration of gaseous and particulate matter during the lockdown period (March-May 2020) declined significantly compared with the preceding years' data from the same timeframe. However, the ambient air quality deteriorates with the onset of unlocking phases and post-monsoon season (October 2020). Higher concentration of NO₂, PM₁₀ and PM_2.5 were recorded at industrial (S1 and S2) and hotspot (S4 and S5) sites. The lowest concentrations of studied pollutants were observed during the first phase of lockdown (March 24 - May 14, 2020). The present study, once again, establishes the direct effect of anthropogenic activities and deteriorating ambient air quality of Delhi.

Comparison of Bone-Patellar Tendon-Bone Graft, Semitendinosus-Gracilis Graft and Semitendinosus-Gracilis with Preserved Tibial Insertion Graft in Anterior Cruciate Ligament Reconstruction in Sports Persons

Introduction

Bone-patellar tendon-bone (BPTB) and semitendinosus-gracilis (STG) are the commonest grafts used for ACL reconstruction. However even after having been debated for years, there is no consensus about the ideal graft. Moreover, the literature is deficient about STG graft with preserved tibial insertion (STGPI) which preserves the proprioception. Our aim is to compare the outcome of BPTB, free STG and STGPI grafts after ACL reconstruction in professional sports persons. We compared the outcome in terms of mechanical stability, functional outcome, return to sports activity and degenerative changes.

Material and Methods

Professional sports persons aged between 16-50 years operated for ACL tear using BPTB, free STG and STGPI grafts with minimum follow-up of two years were identified from hospital records. Patients with associated knee injuries were excluded. Patients, divided in three groups according to graft used, were compared in terms of mechanical stability (arthrometric examination KT-1000 score), functional outcome (Lysholm Score), return to sports activity (Tegner score and difference in thigh circumference) and degenerative changes (KL grading).

Results

BPTB graft group was found to be better than free STG and STGPI graft groups in terms of KT-1000 score. There was no statistically significant difference among the groups in terms of Lysholm score, Tegner score, difference in thigh circumference and KL grading.

Conclusion

BPTB graft is better than free STG and STGPI grafts in terms of knee stability. When compared for patient reported outcome, return to sports activity, osteoarthritic changes and graft failure there is no significant difference among the three types of grafts.

Post Vaccination Epidemiology and Genotyping of Rotavirus Gastroenteritis at a Tertiary Care Centre of North-East Rajasthan

OBJECTIVES

To estimate the proportion of rotavirus diarrhea among hospitalized children aged under-five years, to determine the circulating rotavirus genotypes and to know impact rotavirus vaccine on prevalence and severity of rotavirus diarrhea.

METHODS

This study was a hospital based cross-sectional observational study conducted over a period of 29 mo (September 2017 through January 2020). Stool samples were collected from children who fall within the age range of 0-59 mo with acute diarrhea attending emergency or needing admission. Stool samples were tested for rotavirus by the enzyme linked immune-sorbent assay (ELISA) and genotyped using published methods.

RESULTS

Out of 1480 samples, 360 (24.32%) cases were positive for rotavirus by ELISA, majority of them were male (62.97%). Maximum rotavirus positivity was found in the age group of <11 mo (55.27%). Statistically significance difference was seen in episodes of diarrhea and experience of vomiting in rotavirus diarrhea cases. Highest prevalence has been seen during winter season. The most prevalent G and P type combinations were G3P [8] strains [122 (34.08%)], G2P [4] [83 (23.18%)], G1P [8] [27 (7.54%)] and G9P [4] [20 (5.59%)]. Mixed strains contribute a significant proportion of stool sample.

CONCLUSIONS

Rotavirus is an important cause of diarrhea in hospitalized children. There is continued circulation of G9 and G12 strains and the emergence of G3P [8] as most common strain.

Dual Microbial Inoculation, a Game Changer? - Bacterial Biostimulants With Multifunctional Growth Promoting Traits to Mitigate Salinity Stress in Spring Mungbean

Soil microbes play a vital role in improving plant growth, soil health, ameliorate biotic/abiotic stress and enhance crop productivity. The present study was aimed to investigate a coordinated effect of compatible consortium [salt tolerating Rhizobium and rhizobacterium with 1-aminocyclopropane-1-carboxylate (ACC) deaminase] in enhancing plant growth promoting (PGP) traits, symbiotic efficiency, nutrient acquisition, anti-oxidative enzymes, grain yield and associated profitability in spring mungbean. We identified a non-pathogenic compatible Rhizobium sp. LSMR-32 (MH644039.1) and Enterococcus mundtii LSMRS-3 (MH644178.1) from salt affected areas of Punjab, India and the same were assessed to develop consortium biofertilizer based on salt tolerance, multifarious PGP traits, antagonistic defense activities and presence of nifH, acds, pqq, and ipdc genes. Indole Acetic acid (IAA), P-solubilization, biofilm formation, exo-polysaccharides, siderophore, salt tolerance, ACC deaminase activities were all found highly significant in dual inoculant (LSMR-32 + LSMRS-3) treatment compared to LSMR-32 alone. Under saline soil conditions, dual inoculant showed a higher seed germination, plant height, biomass, chlorophyll content and macro and micro-nutrient uptake, than un-inoculated control. However, symbiotic (nodulation, nodule biomass and leghaemoglobin content) and soil quality parameters (phosphatase and soil dehydrogenase enzymes) increased numerically with LSMR-32 + LSMRS-3 over Rhizobium sp. LSMR-32 alone. Dual bacterial inoculation (LSMR-32 + LSMRS-3) increased the proline content (2.05 fold), anti-oxidative enzymes viz., superoxide dismutase (1.50 fold), catalase (1.43 fold) and peroxidase (3.88 folds) in contrast to control treatment. Decreased Na⁺ accumulation and increased K⁺ uptake resulted in favorable K⁺/Na⁺ ratio through ion homeostasis. Co-inoculation of Rhizobium sp. LSMR-32 and Enterococcus mundtii LSMRS-3 significantly improved the grain yield by 8.92% and led to superior B: C ratio over Rhizobium sp. alone under salt stress. To best of our knowledge this is perhaps the first field report from Indian soils that largely describes dual inoculation of Rhizobium sp. LSMR-32 and Enterococcus mundtii LSMRS-3 and the same can be considered as a game-changer approach to simultaneously induce salt tolerance and improve productivity in spring mungbean under saline stress conditions.

Carbon removal from a mirror-like gold surface by UV light, RF plasma, and IR laser exposure: a comparative study

A decrease in photon intensity due to carbon contamination on optical elements is a serious issue in synchrotron radiation (SR) beamlines. Photon intensity can be regained by refurbishment of optical elements using suitable techniques. In the literature, three suitable techniques [radio frequency (RF) plasma, ultraviolet (UV) radiation (λ=172nm), and infrared (IR) laser (λ=1064nm) exposure] are reported to remove carbon contaminations from optical elements. These techniques are used independently to remove carbon, and, to the best of our knowledge, no systematic study is available on their relative efficiencies and effects on a mirror surface. We have applied these techniques independently for removal of carbon contamination from a gold surface, and detailed surface characterizations are carried out using soft x-ray reflectivity, x-ray photoelectron spectroscopy, Raman spectroscopy, and atomic force microscopy techniques. Characterization results suggest that all three techniques are capable of removing carbon contamination with certain limitations. Here, detailed relative effects on a gold surface after cleaning experiments with three techniques are discussed.

Neutralising antibodies in Spike mediated SARS-CoV-2 adaptation

SARS-CoV-2 Spike protein is critical for virus infection via engagement of ACE2, and amino acid variation in Spike is increasingly appreciated. Given both vaccines and therapeutics are designed around Wuhan-1 Spike, this raises the theoretical possibility of virus escape, particularly in immunocompromised individuals where prolonged viral replication occurs. Here we report chronic SARS-CoV-2 with reduced sensitivity to neutralising antibodies in an immune suppressed individual treated with convalescent plasma, generating whole genome ultradeep sequences by both short and long read technologies over 23 time points spanning 101 days. Although little change was observed in the overall viral population structure following two courses of remdesivir over the first 57 days, N501Y in Spike was transiently detected at day 55 and V157L in RdRp emerged. However, following convalescent plasma we observed large, dynamic virus population shifts, with the emergence of a dominant viral strain bearing D796H in S2 and ΔH69/ΔV70 in the S1 N-terminal domain NTD of the Spike protein. As passively transferred serum antibodies diminished, viruses with the escape genotype diminished in frequency, before returning during a final, unsuccessful course of convalescent plasma. In vitro, the Spike escape double mutant bearing ΔH69/ΔV70 and D796H conferred decreased sensitivity to convalescent plasma, whilst maintaining infectivity similar to wild type. D796H appeared to be the main contributor to decreased susceptibility, but incurred an infectivity defect. The ΔH69/ΔV70 single mutant had two-fold higher infectivity compared to wild type and appeared to compensate for the reduced infectivity of D796H. Consistent with the observed mutations being outside the RBD, monoclonal antibodies targeting the RBD were not impacted by either or both mutations, but a non RBD binding monoclonal antibody was less potent against ΔH69/ΔV70 and the double mutant. These data reveal strong selection on SARS-CoV-2 during convalescent plasma therapy associated with emergence of viral variants with reduced susceptibility to neutralising antibodies.

Facile ultrathin film of silver nanoparticles for bacteria sensing

Silver nanoparticles (AgNPs) exhibit excellent anti-microbial and bactericidal properties. Due to bacterial abhorrence for AgNPs, it is difficult to develop a label-free, sensitive and low-cost bacteria sensor using them. In the present article, we report that an ultrathin and uniform Langmuir-Schaefer (LS) film of AgNPs can be employed for bacteria sensing effectively as compared to that of non-uniform and randomly distributed AgNPs in spin coated film. The uniformly distributed AgNPs in the LS film offer a relatively larger contact surface for bacteria as compared to that of spin coated film. Due to higher contact surface, adsorption of the bacteria on LS film is strongly preferable as compared to that of spin coated film leading to an enhanced sensing performance of the LS film than that of spin coated film. Soil bacteria was grown by the standard protocol and were utilized as model system for bacteria sensing application. The soil bacteria sensing was done by monitoring the piezoresponse and dissipation parameters using a quartz crystal microbalance, simultaneously. Our study indicates that the LS film of AgNPs not only facilitates the adsorption of the soil bacteria but also kills them.

Morphological transformation in the supramolecular assembly of discotic liquid crystal molecules using silver nanoparticles and its sensing application

Triphenylene based discotic liquid crystal (TP) molecules are rich in π-electrons which facilitate π-stacking interaction of the molcules leading to formation of one dimensional nanowires. These nanowires can assemble to form nanoribbons due to a lateral cohesive force among the nanowires. The flat nanoribons undergo a morphological transformation due to incorporation of silver nanoparticles (SNP) into the matrix of TP molecules. The presence of SNP induces a chiral twisting to the nanoribbons and therefore the flat nanoribbons transform into a helical nanoribbon structure. The global chiral structure exhibited by the composition of achiral constituents is due to the creation of topological defects like disclination and dislocation. These defects can lead to a geometrical frustration in the nanoribbons which relaxes with the formation of twisted helical nanoribbons. A minor change in morphology of the supramolecular assembly can have a remarkable effect on the physicochemical properties of the nanoribbons. In this article, we demonstrate that even a minor change in the geometry of aliphatic chains on the surface of nanoribbons can be employed for sensing organic solvents such as acetone and ethanol. The sensing was performed at room temperature. Relative humidity has no effect on the sensing response.

Human Immunodeficiency Virus-1 Viral Load Is Elevated in Individuals With Reverse-Transcriptase Mutation M184V/I During Virological Failure of First-Line Antiretroviral Therapy and Is Associated With Compensatory Mutation L74I

BACKGROUND

M184V/I cause high-level lamivudine (3TC) and emtricitabine (FTC) resistance and increased tenofovir disoproxil fumarate (TDF) susceptibility. Nonetheless, 3TC and FTC (collectively referred to as XTC) appear to retain modest activity against human immunodeficiency virus-1 with these mutations possibly as a result of reduced replication capacity. In this study, we determined how M184V/I impacts virus load (VL) in patients failing therapy on a TDF/XTC plus nonnucleoside reverse-transcriptase inhibitor (NNRTI)-containing regimen.

METHODS

We compared VL in the absence and presence of M184V/I across studies using random effects meta-analysis. The effect of mutations on virus reverse-transcriptase activity and infectiousness was analyzed in vitro.

RESULTS

M184I/V was present in 817 (56.5%) of 1445 individuals with virologic failure (VF). Virus load was similar in individuals with or without M184I/V (difference in log10 VL, 0.18; 95% confidence interval, .05-.31). CD4 count was lower both at initiation of antiretroviral therapy and at VF in participants who went on to develop M184V/I. L74I was present in 10.2% of persons with M184V/I but absent in persons without M184V/I (P < .0001). In vitro, L74I compensated for defective replication of M184V-mutated virus.

CONCLUSIONS

Virus loads were similar in persons with and without M184V/I during VF on a TDF/XTC/NNRTI-containing regimen. Therefore, we did not find evidence for a benefit of XTC in the context of first-line failure on this combination.

Baseline PI susceptibility by HIV-1 Gag-protease phenotyping and subsequent virological suppression with PI-based second-line ART in Nigeria

Objectives

Previous work showed that gag-protease-derived phenotypic susceptibility to PIs differed between HIV-1 subtype CRF02_AG/subtype G-infected patients who went on to successfully suppress viral replication versus those who experienced virological failure of lopinavir/ritonavir monotherapy as first-line treatment in a clinical trial. We analysed the relationship between PI susceptibility and outcome of second-line ART in Nigeria, where subtypes CRF02_AG/G dominate the epidemic.

Methods

Individuals who experienced second-line failure with ritonavir-boosted PI-based ART were matched (by subtype, sex, age, viral load, duration of treatment and baseline CD4 count) to those who achieved virological response (‘successes’). Successes were defined by viral load <400 copies of HIV-1 RNA/mL by week 48. Full-length Gag-protease was amplified from patient samples for in vitro phenotypic susceptibility testing, with PI susceptibility expressed as IC₅₀ fold change (FC) relative to a subtype B reference strain.

Results

The median (IQR) lopinavir IC₅₀ FC was 4.04 (2.49–7.89) for virological failures and 4.13 (3.14–8.17) for virological successes (P = 0.94). One patient had an FC >10 for lopinavir at baseline and experienced subsequent virological failure with ritonavir-boosted lopinavir as the PI. There was no statistically significant difference in single-round replication efficiency between the two groups (P = 0.93). There was a moderate correlation between single-round replication efficiency and FC for lopinavir (correlation coefficient 0.32).

Conclusions

We found no impact of baseline HIV-1 Gag-protease-derived phenotypic susceptibility on outcomes of PI-based second-line ART in Nigeria.

Cubitus Valgus with Tardy Ulnar Nerve Palsy - Functional Outcome of Milch Osteotomy without Anterior Transposition of Ulnar Nerve

Introduction:

To assess the results of Milch osteotomy in terms of deformity correction and functional outcome in the absence of ulnar nerve transposition.

Material and Methods:

Nine patients with cubitus valgus deformity greater than 20° with tardy ulnar nerve palsy (TUNP) operated between 2012 and 2017 were evaluated. Correction by Milch osteotomy and fixation was done in each case, without osteosynthesis of the non-union lateral condyle humerus or transposition of the ulnar nerve. At one year post-operatively, carrying angle, elbow function (Mayo Elbow Performance Score) and ulnar nerve symptoms were assessed.

Results:

The mean carrying angle pre-operatively was 30.8° on the affected side which improved to a mean of 8.3° postoperatively with an average correction of 22.5°. The mean elbow flexion pre-operatively was 129.4° which improved to 133.3° post-operatively. The mean preoperative MEP score was 76.7 which improved to a mean of 92.2 post-operatively (p < 0.01). TUNP recovered completely in all the patients.

Conclusion:

Milch osteotomy is an effective procedure for cubitus valgus deformity correction and its associated tardy ulnar nerve palsy without a decrease in elbow ROM. Correction of even severe valgus deformities without concurrent anterior transposition of the ulnar nerve is likely to improve ulnar nerve symptoms.

Facile Synthesis of Bio-Templated Tubular Co₃O₄ Microstructure and Its Electrochemical Performance in Aqueous Electrolytes

Template-assisted facile synthesis of tubular Co₃O₄ microstructures and its electrochemical performance was studied to understand its use as a potential electrode material for supercapacitors. Tubular porous Co₃O₄ microstructures were synthesized using cotton fibers as bio-template. The as-obtained templated Co₃O₄ structure inherits the morphology and microstructure of cotton fiber. The electrochemical performance of the electrode made up of tubular Co₃O₄ structure was evaluated in 3 M KOH, NaOH, and LiOH aqueous electrolytes. The large-surface-area of tubular Co₃O₄ microstructure has a noticeable pseudocapacitive performance with a capacitance of 401 F/g at 1 A/g and 828 F/g at 2 mV/s, a Coulombic efficiency averaging ~100%, and excellent cycling stability with capacitance retention of about 80% after 5,000 cycles. Overall, the tubular Co₃O₄ microstructure displayed superior electrochemical performance in 3 M KOH electrolyte with peak power density reaching 5,500 W/kg and energy density exceeding 22 Wh/kg. The superior performance of tubular Co₃O₄ microstructure electrode is attributed to its high surface area and adequate pore volume distribution, which allows effective redox reaction and diffusion of hydrated ions. The facile synthesis method can be adapted for preparing various metal oxide microstructures for possible applications in catalysis, electrochemical, sensors, and fuel cells applications.

Influence of Urea on the Synthesis of NiCo₂O₄ Nanostructure: Morphological and Electrochemical Studies

The widespread use of miniature electronic devices calls for energy-dense storage strategies. The supercapacitor-based energy storage devices with high areal capacitance are desired energy storage alternative. It is still a challenge to fabricate supercapacitor-based energy devices with consistent performance. The porous metal oxides with large areal capacitance are desired materials for electrode, but there exists a limited understanding of the influence of synthesis parameters on microstructural properties, which largely govern their electrochemical performance. In the present work, hierarchal spinel nickel cobaltite (NiCo₂O₄) nanostructures were synthesized in the presence of the varying amount of hydrolyzing agent via a simple hydrothermal method coupled with a simple post-annealing process. This work focuses on understanding the influence of hydrolyzing agent in controlling the microstructure and hence ensuing electrochemical properties of the NiCo₂O₄ based electrode. Based on the urea hydrolyzing content, the as synthesized NiCo₂O₄ nanostructure varied from the rod, plate to nanoflower. The mesoporous nanostructures, with urea content 1.49 gm, exhibit a sizeable BJH surface area (79.2 m² g^-1) and high mesopore volume (0.140 cm³ g^-1). Remarkably, the NiCo₂O₄ nanoflower shows high specific capacitance of 3143.451 F/g at 2 mV/s scan rate, 1264.5 F/g at 1 A/g current density, energy density of 56 Wh/kg and power density of 8,400 W/kg in 3 M KOH electrolyte. The capacitance loss after 5000 cycles is 48% at the current density of 10 A/g, indicating their excellent cycling stability. The impressive electrocatalytic activity is largely ascribed to the high intrinsic electronic conductivity, superior mesoporous nanostructures and rich surface Ni active species of the NiCo₂O₄ materials, which can largely boost the interfacial electroactive sites and charge transfer rates indicating promising applications as electrodes in future supercapacitors.

Spiral T1 Spin-Echo for Routine Postcontrast Brain MRI Exams: A Multicenter Multireader Clinical Evaluation

BACKGROUND AND PURPOSE

Spiral MR imaging has several advantages compared with Cartesian MR imaging that can be leveraged for added clinical value. A multicenter multireader study was designed to compare spiral with standard-of-care Cartesian postcontrast structural brain MR imaging on the basis of relative performance in 10 metrics of image quality, artifact prevalence, and diagnostic benefit.

MATERIALS AND METHODS

Seven clinical sites acquired 88 total subjects. For each subject, sites acquired 2 postcontrast MR imaging scans: a spiral 2D T1 spin-echo, and 1 of 4 routine Cartesian 2D T1 spin-echo/TSE scans (fully sampled spin-echo at 3T, 1.5T, partial Fourier, TSE). The spiral acquisition matched the Cartesian scan for scan time, geometry, and contrast. Nine neuroradiologists independently reviewed each subject, with the matching pair of spiral and Cartesian scans compared side-by-side, and scored on 10 image-quality metrics (5-point Likert scale) focused on intracranial assessment. The Wilcoxon signed rank test evaluated relative performance of spiral versus Cartesian, while the Kruskal-Wallis test assessed interprotocol differences.

RESULTS

Spiral was superior to Cartesian in 7 of 10 metrics (flow artifact mitigation, SNR, GM/WM contrast, image sharpness, lesion conspicuity, preference for diagnosing abnormal enhancement, and overall intracranial image quality), comparable in 1 of 10 metrics (motion artifacts), and inferior in 2 of 10 metrics (susceptibility artifacts, overall extracranial image quality) related to magnetic susceptibility (P < .05). Interprotocol comparison confirmed relatively higher SNR and GM/WM contrast for partial Fourier and TSE protocol groups, respectively (P < .05).

CONCLUSIONS

Spiral 2D T1 spin-echo for routine structural brain MR imaging is feasible in the clinic with conventional scanners and was preferred by neuroradiologists for overall postcontrast intracranial evaluation.

The Impact of HIV-1 Drug Escape on the Global Treatment Landscape

The rising prevalence of HIV drug resistance (HIVDR) could threaten gains made in combating the HIV epidemic and compromise the 90-90-90 target proposed by United Nations Programme on HIV/AIDS (UNAIDS) to have achieved virological suppression in 90% of all persons receiving antiretroviral therapy (ART) by the year 2020. HIVDR has implications for the persistence of HIV, the selection of current and future ART drug regimens, and strategies of vaccine and cure development. Focusing on drug classes that are in clinical use, this Review critically summarizes what is known about the mechanisms the virus utilizes to escape drug control. Armed with this knowledge, strategies to limit the expansion of HIVDR are proposed.

A clinicopathological study of upper aerodigestive tract cancers

Background

The upper aerodigestive tract (UAT) includes the nose and paranasal sinuses, oral cavity, pharynx, larynx, and salivary glands. Cancers of the UAT constitute approximately 4% of all malignancies. In this study, the varied nature of the UAT cancers was studied to find out their incidence, etiology, and clinicopathological correlations.

Materials and Methods

This prospective, observational, and clinicopathological study was conducted on 100 patients who were presented at outdoor in the Department of ENT, Government Medical College/Rajindra Hospital, Patiala, Punjab, India, from October 2016 to October 2018. Proven cases of UAT cancers were taken up and reviewed to gather data on multiple clinicopathological variables, such as age, sex, predisposing factors, and site of pathology. Histopathological differentiation was noted after conducting a biopsy.

Results

Most patients of UAT cancers were in the age group of 40-70 years. Maximum incidence was among males (82%) compared to females (28%). The most common predisposing factor was alcohol + smoking (28%), followed by alcohol + chewing tobacco (25%). The most common symptom in the oral cavity was ulcer and odynophagia (38%) each. In oropharyngeal cancers, dysphagia (92%) was the most common symptom. In laryngeal cancers, dyspnea (68%) and hoarseness of voice (32%) were the most common. The most common site involved in UAT cancers was the oral cavity (31%), followed by oropharynx (28%), larynx (22%), hypopharynx (7%), and salivary gland (5%). The most common histopathological type was squamous cell carcinoma (SCC) (90%). Most of the ulceroproliferative and exophytic growth was moderately differentiated SCC on histopathology.

Conclusion

Studies are essential for education and awareness aimed at reducing exposure to habit-forming substances.

Tuberculosis infection and disease in people living with HIV in countries with low tuberculosis incidence

In countries with low tuberculosis (TB) incidence, TB is concentrated in vulnerable populations, including people living with the human immunodeficiency virus (PLHIV), who have a substantially greater risk of TB than people without HIV. We searched PubMed, EMBASE and Web of Science for studies evaluating the risk factors for latent tuberculous infection (LTBI) or active TB in PLHIV in countries with TB incidence 10 per 100 000 population. Due to the number of risk factors evaluated and heterogeneity in study designs, we present summary data and a narrative synthesis. We included 45 studies: 17 reported data on the risk factors for LTBI and 32 on active TB. Black, Asian or Hispanic ethnicity, birth or long-term residence in a country with high TB incidence, and HIV acquisition via injecting drug use (IDU) or heterosexual sex were strong predictors of both LTBI and active TB. History of contact, a greater degree of immunosuppression at diagnosis or higher viral load increased the TB risk. Early HIV diagnosis to allow timely initiation of antiretroviral therapy is essential for the prevention of TB in PLHIV. Screening and treating PLHIV for LTBI to reduce the risk of progression to active TB disease should also be considered to further reduce the burden of active TB in low TB incidence settings. Research to support the expansion of TB and HIV prevention and treatment globally is essential to eliminate TB in low-incidence settings.

Physical Properties and Theoretical Study of NixCo3-xO₄ (0 ≤ x ≤ 1.5) Nanostructures as High-Performance Electrode Materials for Supercapacitors

Study evaluates the electrochemical performance of off-stoichiometric Ni_xCo_3-xO₄ compounds. The off-stoichiometric samples were prepared via hydrothermal technique by systematically varying Co/Ni molar ratio. Physical and electrochemical properties of Ni_xCo_3-xO₄ were observed to be stoichiometry dependent. The increase in Ni/Co ratio in Ni_xCo_3-xO₄ leads to the morphological transformation from fibrous bundles to urchin like nanospheres with a concomitant increase in the surface area reaching up to 132 m2/g. The optimal specific capacitance of 225 F/g at a current density of 1 A/g and 524 F/g at 10 mV/s scan rate was observed of x 1.0 sample, with an increased retention capacity ∼120% measured at 2 A/g current density. The hybrid density functional theory (DFT) calculations of the electronic density of states identified Ni_1.0Co₂O₄ with optimal band-gap of 2.38 eV with an expectation of displaying higher electrocapacitive performance. Experimentally, Ni_0.92Co_2.08O₄ displayed superior electrocapacitive performance among all Ni/Co ratio in Ni_xCo_3-xO₄. The DFT study also predicted Ni preference to the octahedral site, which is in-line with the observed increase in ferromagnetic nature, decreased lattice parameter, and increased structural disorder with increasing Ni/Co ratio. The improved electrochemical performance of Ni_xCo_3-xO₄ (x > 0) is attributed to the mesoporous hierarchical structure, with a high electroactive surface which can effectively improve structural stability, and reduce the ionic and electron diffusion length. Compared to the pure Co₃O₄, the reduction of Co content in Ni_xCo_3-xO₄ is desired due to the high cost and toxicity of Co element.

EEG Neurofeedback Training in Children With Attention Deficit/Hyperactivity Disorder: A Cognitive and Behavioral Outcome Study

BACKGROUND

Attention deficit/hyperactivity disorder (ADHD) is a highly prevalent childhood disorder with symptoms of inattention, impulsivity, and hyperactivity. EEG neurofeedback training (NFT) is a new intervention modality based on operant conditioning of brain activity, which helps reduce symptoms of ADHD in children.

METHODS AND PROCEDURES

To examine the efficacy of NFT in children with ADHD, an experimental longitudinal design with pre-post comparison was adopted. A total of 30 children in the age range of 6 to 12 years diagnosed as ADHD with or without comorbid conditions were assigned to treatment group (TG; n = 15) and treatment as usual group (TAU; n = 15). TG received EEG-NFT along with routine clinical management and TAU received routine clinical management alone. Forty sessions of theta/beta NFT at the C3 scalp location, 3 to 4 sessions in a week for a period of 3.5 to 5 months were given to children in TG. Children were screened using sociodemographic data and Binet-Kamat test of intelligence. Pre-and postassessment tools were neuropsychological tests and behavioral scales. Follow-up was carried out on 8 children in TG using parent-rated behavioral measures.

RESULTS

Improvement was reported in TG on cognitive functions (sustained attention, verbal working memory, and response inhibition), parent- and teacher-rated behavior problems and on academic performance rated by teachers. Follow-up of children who received NFT showed sustained improvement in ADHD symptoms when assessed 6 months after receiving NFT.

CONCLUSION

The present study suggests that NFT is an effective method to enhance cognitive deficits and helps reduce ADHD symptoms and behavior problems. Consequently, academic performance was found to be improved in children with ADHD. Improvement in ADHD symptoms induced by NFT were maintained at 6-month follow-up in children with ADHD.

Active case finding and treatment adherence in risk groups in the tuberculosis pre-elimination era

Vulnerable populations, including homeless persons, high-risk drug and alcohol users, prison inmates and other marginalised populations, contribute a disproportionate burden of tuberculosis (TB) cases in low-incidence settings. Drivers of this disease burden include an increased risk of both TB transmission in congregate settings, and progression from infection to active disease. Late diagnosis and poor treatment completion further propagate the epidemic and fuel the acquisition of drug resistance. These groups are therefore a major priority for TB control programmes in low-incidence settings. Targeted strategies include active case finding (ACF) initiatives and interventions to improve treatment completion, both of which should be tailored to local populations. ACF usually deploys mobile X-ray unit screening, which allows sensitive, high-throughput screening with immediate availability of results. Such initiatives have been found to be effective and cost-effective, and associated with reductions in proxy measures of transmission in hard-to-reach groups. The addition of point-of-care molecular diagnostics and automated X-ray readers may further streamline the screening pathway. There is little evidence to support interventions to improve adherence among these risk groups. Such approaches include enhanced case management and directly observed treatment, while video-observed therapy (currently under evaluation) appears to be a promising tool for the future. Integrating outreach services to include both case detection and case-management interventions that share a resource infrastructure may allow cost-effectiveness to be maximised. Integrating screening and treatment for other diseases that are prevalent among targeted risk groups into TB outreach interventions may further improve cost-effectiveness. This article reviews the existing literature, and highlights priorities for further research.

Quality protein maize based muffins: influence of non-gluten proteins on batter and muffin characteristics

Quality protein maize (QPM) is nutritionally improved maize which has twice the amount of lysine and tryptophan than normal maize. The present study evaluated the effect of different proteins namely egg white proteins (EWP), casein, whey protein isolate, soy protein isolate (SPI) on characteristics of gluten free QPM based muffins. QPM muffins without any added protein served as control and muffins prepared using wheat and EWP served as reference. Effect of addition of different proteins on pasting properties revealed that the thermal stability of QPM flour increased as indicated by decrease in breakdown viscosity. The effect of added proteins on QPM muffin-making properties was evaluated for rheology of batter and physicochemical, texture, color and sensory characteristics of muffins. Dynamic rheology showed that storage modulus (G') and loss modulus (G″) of batter with SPI was the highest while batter with EWP showed lowest value. QPM-EWP muffins were softer, chewy and springier and had more specific volume than control muffins and were comparable to reference muffins. Inclusion of all proteins increased L* values (lightness) and decreased a* (redness/greenness) and b* (yellow/blueness) values of QPM based muffins. Sensory analysis revealed that gluten free QPM muffin prepared from EWP were acceptable with a sensory score of 7.97 which was comparable to reference muffins (8.03).

Development of the R263K Mutation to Dolutegravir in an HIV-1 Subtype D Virus Harboring 3 Class-Drug Resistance

Dolutegravir (DTG), a second-generation integrase strand-transfer inhibitor (INSTI), is equivalent or superior to current non-nucleotide reverse transcriptase inhibitors (NNRTIs), protease inhibitors (PIs), and first-generation INSTI-based antiretroviral regimens (ARVs). It has the potential to make big improvements in HIV control globally and within patients. This is perhaps the most "precious" HIV drug available. The integrase mutation R263K has been observed in tissue culture experiments and in patients treated with dolutegravir monotherapy in clinical trials. Globally, adherence and monitoring may be less than optimal and therefore DTG resistance more common. This is particularly important in low-middle-income countries, where patients may remain on failing regimens for longer periods of time and accumulate drug resistance. Data on this mutation in non-subtype B infections do not exist. We describe the first report of the R263K integrase mutation in a dolutegravir-exposed subtype D-infected individual with vertically acquired HIV. We have used deep sequencing of longitudinal samples to highlight the change in resistance over time while on a failing regimen. The case highlights that poorly adherent patients should not be offered dolutegravir even as part of a combination regimen and that protease inhibitors should be used preferentially.

DNA barcoding for specific and sensitive detection of Cuminum cyminum adulteration in Bunium persicum

BACKGROUND

Bunium persicum commonly called as Kala zeera, a very high value herbaceous spice used for medicinal purposes is often adulterated with Cuminum cyminum or Safed zeera, a closely related species. Lack of distinctive morphological features makes the identification of genuine kala zeera from its adulterant difficult, the problem is even exaggerated in case of powdered material.

METHODOLOGY

Genomic DNA was extracted from all the plant materials by using CTAB-SDS method (Möller et al., 1992) with slight modifications. On the basis of reproducibility and high amplification ability, four universal barcoding loci viz. ITS2, rbcL-a, mat K and psbA-trnH and a specific locus Cum were used in the present study. The amplified PCR products were sequenced bidirectionally and assembled to obtain contigs. The sequences thus obtained were aligned using MUSCLE algorithm (Edgar, 2004) and information pertaining to conserved/ variable/ parsimony informative sites, number of transitions, transversions and Indels was obtained after analyzing the sequences.

RESULTS AND CONCLUSION

Among the tested barcoding loci, psbA-trnH has proven to be best barcode in authentication of kala zeera as its amplification and sequencing success was high and it showed the presence of polymorphic sites to detect interspecific variation. This barcode could differentiate between safed zeera and kala zeera in a single reaction, simultaneously.

Influence of the core-hole effect on optical properties of magnesium oxide (MgO) near the Mg L-edge region

The influence of the core-hole effect on optical properties of magnesium oxide (MgO) is established through experimental determination of optical constants and first-principles density functional theory studies. Optical constants (δ and β) of MgO thin film are measured in the spectral region 40-300 eV using reflectance spectroscopy techniques at the Indus-1 synchrotron radiation source. The obtained optical constants show strong core exciton features near the Mg L-edge region, causing significant mismatch with Henke's tabulated values. On comparing the experimentally obtained optical constants with Henke's tabulated values, an edge shift of ∼3.0 eV is also observed. Distinct evidence of effects of core exciton on optical constants (δ and β) in the near Mg L-edge absorption spectra are confirmed through first-principles simulations.

A biomechanical study comparing proximal femur nail and proximal femur locking compression plate in fixation of reverse oblique proximal femur fractures

BACKGROUND

The reverse oblique trochanteric fractures are common fractures and its treatment poses a challenge. The purpose of this study was to compare the biomechanical parameters of the construct using proximal femoral nail (PFN) and proximal femoral locking compression plates (PFLCP) in these fractures using cadaveric specimens.

MATERIALS AND METHODS

Twenty freshly harvested cadaveric femoral specimens were randomly assigned to two groups after measuring bone mineral density, ten of which were implanted with PFN and the other ten with PFLCP. The constructs were made unstable to simulate reverse oblique trochanteric fracture (AO type 31A3.3) by removing a standard size posteromedial wedge. These constructs were tested in a computer controlled cyclic compressive loading with 200kg at a frequency of 1 cycle/s (1Hz) and test was observed for 50,000 cycles or until implant failure, whichever occurred earlier. Peak displacements were measured and analysis was done to determine axial stiffness and subsidence in axial loading.

RESULTS

All the specimens in PFN group completed 50,000 cycles and in PFLCP group, seven specimens completed 50,000 cycles. Average subsidence in PFN group was 1.24±0.22mm and in PFLCP group was 1.48±0.38mm. The average stiffness of PFN group (72.6±6.8N/mm) was significantly higher than of PFLCP group (62.4±4.9N/mm) (P=0.04). The average number of cycles sustained by PFLCP was 46634 and for PFN group was 50,000 (P=0.06).

CONCLUSION

The PFN is biomechanically superior to PFLCP in terms of axial stiffness, subsidence and number of specimens failed for the fixation of reverse oblique trochanteric fractures of femur.

Joint Involvement in Children with Celiac Disease

OBJECTIVE

To determine early joint involvement as detected by ultrasonography in children with newly diagnosed celiac disease, and in children with celiac disease on gluten-free diet for more than 6 months.

METHODS

Cross-sectional comparative study evaluating joint abnormalities by ultrasonography.

Results

Ultrasonography showed abnormalities in 19 out of 60 (31.7%) children with newly diagnosed celiac disease as compared to 2 (3.3%) out of 60 in those on a gluten-free diet for more than 6 months.

CONCLUSION

Subclinical synovitis as detected by ultrasound is a frequent finding in newly diagnosed children with celiac disease.

Hulless barley as a promising source to improve the nutritional quality of wheat products

In this study, efforts were made to utilize hulless barley (variety BHS352) to enhance the nutritive value of chapatti and biscuit made from wheat flour. Barley flour was added to wheat flour in different ratios (5 to 30%). Antioxidant activity, total phenolic content and β-glucan content were determined both in flour blends and their products. Changes in physical quality and taste of chapatti and biscuits after blending of hulless barley flour with wheat flour were measured. The chapatti quality score decreased by 15% and biscuit spread factor by 33% after 30% barley flour blending. Significant increase in β-glucan content and antioxidant activity of flour blends and their products was observed at 30% blending level. The phenolic content increased from 63 to 135 µg for biscuits and 237 to 287 ug GAE/g for chapatti with blending of 30% barley flour.

Structural variation in a synchrotron-induced contamination layer (a-C:H) deposited on a toroidal Au mirror surface

A carbon layer deposited on an optical component is the result of complex interactions between the optical surface, adsorbed hydrocarbons, photons and secondary electrons (photoelectrons generated on the surface of optical elements). In the present study a synchrotron-induced contamination layer on a 340 mm × 60 mm Au-coated toroidal mirror has been characterized. The contamination layer showed a strong variation in structural properties from the centre of the mirror to the edge region (along the long dimension of the mirror) due to the Gaussian distribution of the incident photon beam intensity/power on the mirror surface. Raman scattering measurements were carried out at 12 equidistant (25 mm) locations along the length of the mirror. The surface contamination layer that formed on the Au surface was observed to be hydrogenated amorphous carbon film in nature. The effects of the synchrotron beam intensity/power distribution on the structural properties of the contamination layer are discussed. The I(D)/I(G) ratio, cluster size and disordering were found to increase whereas the sp²:sp³ ratio, G peak position and H content decreased with photon dose. The structural parameters of the contamination layer in the central region were estimated (thickness ≃ 400 Å, roughness ≃ 60 Å, density ≃ 72% of bulk graphitic carbon density) by soft X-ray reflectivity measurements. The amorphous nature of the layer in the central region was observed by grazing-incidence X-ray diffraction.

Composite CuFe1-xSnxO2/p-type silicon photodiodes

CuFe_1-xSn_xO₂ composite thin film/p-type silicon diodes were prepared on substrate by sol-gel method (x=0.00, 0.01, 0.03, 0.05, 0.07). The structure of CuFe_1-xSn_xO₂ composite thin films was studied using XRD analysis and films exhibited amorphous behavior. The elemental compositions and surface morphology of the films were characterized using SEM and EDX. EDX results confirmed the presence of the compositional elements. The optical band gap of CuFe_1-xSn_xO₂ composite thin films was determined using the optic spectra. The optical band gaps of the CuFe_1-xSn_xO₂ composite thin films were calculated using optical data and were found to be 3.75, 3.78, 3.80, 3.85 and 3.83eV for x=0.00, 0.01, 0.03, 0.05 and 0.07, respectively. The photoresponse and electrical properties of the Al/CuFe_1-xSn_xO₂/p-Si/Al diode were studied. The barrier height and ideality factor were determined to be averagely 0.67eV and 2.6, respectively. The electrical and photoresponse characteristics of the diodes have been investigated under dark and solar light illuminations, respectively. The interface states were used to explain the results obtained in present study. CuFe_1-xSn_xO₂ photodiodes exhibited a high photoresponsivity to be used in optoelectronic applications.

Scrub typhus causing neonatal hepatitis with acute liver failure-A case series

Neonatal hepatitis with acute liver failure due to varied etiology including various infections is reported in the past. Scrub typhus as a cause of neonatal hepatitis has rarely been reported in literature. A high index of clinical suspicion is required for early diagnosis and timely treatment. Severity and prognosis of the disease varies widely because several different strains of Orientia tsutsugamushi exist with different virulence. Delayed diagnosis can result in complication and significant morbidity and mortality. Here, we report three cases of neonatal hepatitis with acute liver failure caused by scrub typhus to increase awareness.

Experimental observation of spatially resolved photo-luminescence intensity distribution in dual mode upconverting nanorod bundles

A novel method for demonstration of photoluminescence intensity distribution in upconverting nanorod bundles using confocal microscopy is reported. Herein, a strategy for the synthesis of highly luminescent dual mode upconverting/downshift Y_1.94O₃:Ho³⁺_0.02/Yb³⁺_0.04 nanorod bundles by a facile hydrothermal route has been introduced. These luminescent nanorod bundles exhibit strong green emission at 549 nm upon excitations at 449 nm and 980 nm with quantum efficiencies of ~6.3% and ~1.1%, respectively. The TEM/HRTEM results confirm that these bundles are composed of several individual nanorods with diameter of ~100 nm and length in the range of 1–3 μm. Furthermore, two dimensional spatially resolved photoluminescence intensity distribution study has been carried out using confocal photoluminescence microscope throughout the nanorod bundles. This study provides a new direction for the potential use of such emerging dual mode nanorod bundles as photon sources for next generation flat panel optical display devices, bio-medical applications, luminescent security ink and enhanced energy harvesting in photovoltaic applications.

Extensive subclinical sinusitis leading to Moraxella osloensis meningitis

We report a case of a 31 year old male with extensive subclinical sinusitis leading to erosion in the cribriform plate and subsequent meningitis caused by the organism Moraxella osloensis. The patient presented to the emergency department with rapid onset confusion, neck stiffness and headache. Inflammatory markers, renal and liver function, and a chest radiograph were all normal. CT Head showed extensive polyp disease in the paranasal sinuses with expansion of the left frontal sinus and CT Sinuses revealed an area of low attenuation in the cribriform plate consistent with bony erosion. MRI Head showed thick loculated sinus inflammation. Lumbar puncture yielded CSF with a high white cell count of predominantly mononuclear cells, no visible organisms and an elevated protein. CSF microscopy, culture and viral PCR were not diagnostic, and so the CSF was sent for 16S rDNA PCR screening, which identified the rDNA of Moraxella osloensis. Moraxella osloensis is a rare cause of bacterial meningitis, with only a few reported cases. This case illustrates that sinusitis, while a common condition, when severe can predispose to intracranial infection with atypical and low virulence organisms such as Moraxella species, which do not commonly cause invasive CNS disease. This case represents the first case of Moraxella osloensis meningitis reported from the United Kingdom.

Diagnostic Value of Ultrasonography in Hydatid Disease in Abdomen and Chest

A prospective diagnosis of hydatid cyst was made in 90 cases involving abdomen and chest. It was based on the various sonographic signs of hydatid disease described in the literature. Surgery was performed in 60 patients while 30 were lost to follow-up. The diagnosis was confirmed in 55 patients while it was false positive in 5. The liver was the most common organ involved, followed by chest, kidney, peritoneum, spleen and retroperitoneum. Separation of the membrane from the wall, multiple daughter cysts, and collapsed cysts, were found to be diagnostic of hydatid disease. It is stressed that certain signs are specific for hydatid disease and thus do not cause any differential diagnostic problems.

Total extraperitoneal approach in large inguino-scrotal hernias: an institutional approach

Introduction: Since 2 decades laparoscopichernia repair has gained key role in uncomplicated inguinal hernia surgery with advantages showed by several trials and guidelines. However, its role in complicated inguinal hernia such as incarcerated, obstructed and inguino-scrotal is debatable. Cases of large inguino-scrotal raises objection to laparoscopic procedure because of anticipated problems and complications in dissecting extended hernia sac even though posterior approach is advocated as repair of choice for complicated cases. Here, we reviewed our series of patients undergoing TEP in a limited time frame.Method: Between March 2013 and June 2014, 50 consecutive patients underwent TEP repair for inguinoscrotal hernia. Patient demographics, hernia characteristics, operating time, surgical technique, conversion rate, intraoperative, postoperative complications and recurrence was recorded and analyzed using MS Excel.Results: 50 patients were recorded, 26 had unilateral and 24 had bilateral hernias. Mean age was 52 (22-72) years. The mean operation time was 70 (50-140) min. Bilateral repairs took 45% (18 min) longer than for unilateral repairs (52 + 12 min). Two (12.5%) patients required combined open surgery to transect the incarcerated omentum. There was no mortality. Morbidity was limited to asymptomatic seroma formation in 2 (12.5%) patients; 1 patient of combined open-TEP approach had wound infection, both treated conservatively. Mean follow up was 6.3 months; we recorded 2 recurrences (12.5%). The mean length of hospital stay was 1.8 days.Conclusion: We conclude that TEP can be safely employed for complicated inguinal hernias repair. Surgical experience in mandatory with tailored technique to reduce morbidity and achieve good clinical outcome with acceptable recurrence rates.

Laparoscopic hernioplasty of large ventral hernia with transfascial sutures: short term utility and outcome

Introduction: The laparoscopic approach to repairing ventral and incisional hernias has gained increasing popularity worldwide. The approximation of the hernia defect during laparoscopic ventral hernia repair, prior to mesh fixation, provides a more physiologic and anatomic repair. Defect closure also provides more defect overlap with mesh placement and, possibly decreases recurrence rates. We reviewed the experience of laparoscopic repair of large ventral hernia (diameter ≥5cm) at a university hospital in the Nepal with particular reference to patients with massive defects (diameter ≥15cm) and transfascial closure.Methods: A total of 32 patients underwent laparoscopic ventral (incisional or umbilical/paraumbilical) hernia repair between July 2014 and September 2015.Results: The prevalence of conversion to open surgery was 3.1%. The prevalence of postoperative complications was 15.6%. Median postoperative follow-up was 8.2 months. A total of 9.4% cases suffered late complications and 3.1% developed recurrence. Twelve patients underwent repair of defects ≥10cm in diameter with no recurrence. Three patients underwent repair of ‘massive’ incisional hernia (diameter ≥15cm) with a prevalence of recurrence of 3.1%. Ten patients with a body mass index (BMI) ≥30kg/m2 (range, 32–35kg/m2) underwent laparoscopic repair without any recurrence.Conclusions: Laparoscopic ventral hernia repair with transfascial suturing can be carried out safely with a low prevalence of recurrence. It may have advantages in obese patients in whom open repair would represent a significant undertaking. Laparoscopic ventral hernia repair may be used in cases of large and massive hernias, in which the risk of recurrence increases but is comparable with open repair and associated with low morbidity.

Laparoscopic inguinal hernia repair (total extra-peritoneal): tips and tricks

Introduction: Inguinal hernia is one of the major problems at B.P. Koirala Institute of Health Sciences (BPKIHS), a tertiary referral center. We perform Laparoscopic hernia repair as a routine procedure for groin hernias. This technique is highly demanding and complex. In our country the development of laparoscopic technique is still in a developing phase.Aims and objective: To present technical tips and trick in LIHR, which we experienced, as lead to preventing intra/post operative complication.Results: We have performed a total of 129 groin hernia repairs in 105 patients with M: F= 26:1 and mean age 41.97±20 (16-85). The mean length of hospital stay was 1.14 ± 0.35 days. Eight patients were converted to TAPP and 1 converted to open hernia repair due to operative difficulty. The complications encountered are pain (20), seroma(8) and epididymitis(2).Conclusion: In our experience LIHR (TEP) is safe method for routine management of groin hernias.

Degradation kinetics of bioactive components, antioxidant activity, colour and textural properties of selected vegetables during blanching

Bioactive components of fruit and vegetables play an important role in scavenging free radicals and protect the body from degenerative diseases. A kinetic study was conducted to quantify the losses occurring in bioactive components, antioxidant activity and changes in colour and firmness of four commonly used vegetables (beetroot, green pea, eggplant and green pepper) during heat treatment (70-90 °C). The study revealed that logistic model can predict the variation in bioactive components and antioxidant activity with higher R² and lower root mean square error (RMSE) as compared to first order model due to logarithmic reduction in these properties in the beginning of the process itself. However zero and first order kinetic models were found suitable to predict the changes occurring in colour and firmness respectively during blanching. D, z value, activation energy (E_a), activation enthalpy and entropy were calculated for all measured parameters for selected vegetables in the temperature range of 70-90 °C. These finding would be useful in designing thermal processes and related calculations for these vegetables.