Nickel as a modifier of calcium oxalate: an in situ liquid cell TEM investigation of nucleation and growth

Despite extensive research on the nucleation and growth of calcium oxalate (CaOx) crystals, there are still several challenges and unknowns that remain. In particular, the role of trace metal elements in the promotion or inhibition of CaOx crystals is not well understood. In the present study, in situ graphene liquid cell transmission electron microscopy (in situ GLC TEM) was used to observe real-time, nanoscale transformations of CaOx crystals in the presence of nickel ions (Ni2+). The results showed that Ni2+ form Ni-water complexes, acting as a shape-directing species, generating a unique morphology and altering growth kinetics. Transient adsorption of Ni-water complexes resulted in a metastable phase formation of calcium oxalate trihydrate. Atomistic molecular dynamics simulations confirmed that Ni2+ acts as a weak inhibitor which slows down the CaOx crystallization, elucidating that Ni2+ impacts small-sized CaOx clusters by bringing more water into the clusters. This work highlighted the intricacies behind the effect of Ni2+ on CaOx biomineralization that were made possible to discern using in situ GLC TEM.

Real-time TEM observations of ice formation in graphene liquid cell

The study of ice nucleation and growth at the nanoscale is of utmost importance in geological and atmospheric sciences. However, existing transmission electron microscopy (TEM) approaches have been unsuccessful in imaging ice formation directly. Herein, we demonstrate how radical scavengers - such as TiO₂ - encased with water in graphene liquid cells (GLCs) facilitate the observation of ice nucleation phenomena at low temperatures. Atomic-resolution imaging reveals the nucleation and growth of cubic ice-phase crystals at close proximity to TiO₂-water nanointerfaces at low temperatures. Interestingly, both heterogeneously and homogeneously nucleated ice crystals exhibited this cubic phase. Ice crystal nuclei were observed to be more stable at the TiO₂-water nanointerface, as compared with crystals in the bulk liquid (homogeneous nucleation), suggesting the radical scavenging efficacy of TiO₂ nanoparticles mitigating the electron beam by-products. The present work demonstrates that the use of radical scavengers in GLC TEM shows great promise towards unveiling the nanoscale pathways for ice nucleation and growth dynamic events.

In Situ Microscopic Studies on the Interaction of Multi-Principal Element Nanoparticles and Bacteria

Multi-principal element nanoparticles are an emerging class of materials with potential applications in medicine and biology. However, it is not known how such nanoparticles interact with bacteria at nanoscale. In the present work, we evaluated the interaction of multi-principal elemental alloy (FeNiCu) nanoparticles with Escherichia coli (E. coli) bacteria using the in situ graphene liquid cell (GLC) scanning transmission electron microscopy (STEM) approach. The imaging revealed the details of bacteria wall damage in the vicinity of nanoparticles. The chemical mappings of S, P, O, N, C, and Cl elements confirmed the cytoplasmic leakage of the bacteria. Our results show that there is selective release of metal ions from the nanoparticles. The release of copper ions was much higher than that for nickel while the iron release was the lowest. In addition, the binding affinity of bacterial cell membrane protein functional groups with Cu, Ni, and Fe cations is found to be the driving force behind the selective metal cations' release from the multi-principal element nanoparticles. The protein functional groups driven dissolution of multielement nanoparticles was evaluated using the density functional theory (DFT) computational method, which confirmed that the energy required to remove Cu atoms from the nanoparticle surface was the least in comparison with those for Ni and Fe atoms. The DFT results support the experimental data, indicating that the energy to dissolve metal atoms exposed to oxidation and/or the to presence of oxygen atoms at the surface of the nanoparticle catalyzes metal removal from the multielement nanoparticle. The study shows the potential of compositional design of multi-principal element nanoparticles for the controlled release of metal ions to develop antibacterial strategies. In addition, GLC-STEM is a promising approach for understanding the nanoscale interaction of metallic nanoparticles with biological structures.

Enhanced Bacterial Growth by Polyelemental Glycerolate Particles

While polyelemental alloys are shown to be promising for healthcare applications, their effectiveness in promoting bacterial growth remains unexplored. In the present work, we evaluated the interaction of polyelemental glycerolate particles (PGPs) with Escherichia coli (E. coli) bacteria. PGPs were synthesized using the solvothermal route, and nanoscale random distribution of metal cations in the glycerol matrix of PGPs was confirmed. We observed 7-fold growth of E. coli bacteria upon 4 h of interaction with quinary glycerolate (NiZnMnMgSr-Gly) particles in comparison to control E. coli bacteria. Nanoscale microscopic studies on bacteria interactions with PGPs showed the release of metal cations in the bacterium cytoplasm from PGPs. The electron microscopy imaging and chemical mapping indicated bacterial biofilm formation on PGPs without causing significant cell membrane damage. The data showed that the presence of glycerol in PGPs is effective in controlling the release of metal cations, thus preventing bacterial toxicity. The presence of multiple metal cations is expected to provide synergistic effects of nutrients needed for bacterial growth. The present work provides key microscopic insights of mechanisms by which PGPs enhance biofilm growth. This study opens the door for future applications of PGPs in areas where bacterial growth is essential including healthcare, clean energy, and the food industry.

Multimetallic glycerolate as a precursor template of spherical porous high-entropy oxide microparticles

High-entropy materials have received notable attention concern on account of their unique structure, tunable properties, and unprecedented potential applications in many fields. In this work, for the first time a NiCoMnZnMg-containing high-entropy glycerolate (HE-Gly) particles has been synthesized using a scalable solvothermal method. The HE-Gly particles were used as a precursor in design of porous high-entropy oxide (HEO) microparticles. The morphological and structural characterizations demonstrate that the temperature of the annealing process, and the composition of the metal ions in the HE-Gly precursors play important roles in determining porosity, crystallinity, and phase separation in HEOs. In fact, HE-Gly exhibited a porous structure of spinel HEOs with secreted MgO phase after annealing process at 800 °C, while the annealing process at 400 °C led to a low-crystallinity spinel phase without phase segregation. Overall, this work describes HE-Gly as a new precursor for altering the composition, crystallinity, and porosity of HEOs. This strategy is scalable for potential high mass productions, paving a new path toward industrial application of high-entropy materials.

Unveiling growth and dynamics of liposomes by graphene liquid cell-transmission electron microscopy

Liposome is a model system for biotechnological and biomedical purposes spanning from targeted drug delivery to modern vaccine research. Yet, the growth mechanism of liposomes is largely unknown. In this work, the formation and evolution of phosphatidylcholine-based liposomes are studied in real-time by graphene liquid cell-transmission electron microscopy (GLC-TEM). We reveal important steps in the growth, fusion and denaturation of phosphatidylcholine (PC) liposomes. We show that initially complex lipid aggregates resembling micelles start to form. These aggregates randomly merge while capturing water and forming small proto-liposomes. The nanoscopic containers continue sucking water until their membrane becomes convex and free of redundant phospholipids, giving stabilized PC liposomes of different sizes. In the initial stage, proto-liposomes grow at a rate of 10-15 nm s^-1, which is followed by their growth rate of 2-5 nm s^-1, limited by the lipid availability in the solution. Molecular dynamics (MD) simulations are used to understand the structure of micellar clusters, their evolution, and merging. The liposomes are also found to fuse through lipid bilayers docking followed by the formation of a hemifusion diaphragm and fusion pore opening. The liposomes denaturation can be described by initial structural destabilization and deformation of the membrane followed by the leakage of the encapsulated liquid. This study offers new insights on the formation and growth of lipid-based molecular assemblies which is applicable to a wide range of amphiphilic molecules.

A room temperature rechargeable Li2O-based lithium-air battery enabled by a solid electrolyte

A lithium-air battery based on lithium oxide (Li₂O) formation can theoretically deliver an energy density that is comparable to that of gasoline. Lithium oxide formation involves a four-electron reaction that is more difficult to achieve than the one- and two-electron reaction processes that result in lithium superoxide (LiO₂) and lithium peroxide (Li₂O₂), respectively. By using a composite polymer electrolyte based on Li₁₀GeP₂S₁₂ nanoparticles embedded in a modified polyethylene oxide polymer matrix, we found that Li₂O is the main product in a room temperature solid-state lithium-air battery. The battery is rechargeable for 1000 cycles with a low polarization gap and can operate at high rates. The four-electron reaction is enabled by a mixed ion-electron-conducting discharge product and its interface with air.

Nanoscale chemical and structural investigation of solid solution polyelemental transition metal oxide nanoparticles

Although it has been shown that configurational entropy can improve the structural stability in transition metal oxides (TMOs), little is known about the oxidation state of transition metals under random mixing of alloys. Such information is essential in understanding the chemical reactivity and properties of TMOs stabilized by configurational entropy. Herein, utilizing electron energy loss spectroscopy (EELS) technique in an aberration-corrected scanning transmission electron microscope (STEM), we systematically studied the oxidation state of binary (Mn, Fe)₃O₄, ternary (Mn, Fe, Ni)₃O₄, and quinary (Mn, Fe, Ni, Cu, Zn)₃O₄ solid solution polyelemental transition metal oxides (SSP-TMOs) nanoparticles. Our findings show that the random mixing of multiple elements in the form of solid solution phase not only promotes the entropy stabilization but also results in stable oxidation state in transition metals spanning from binary to quinary transition metal oxide nanoparticles.

Correlating Magnetic Hyperthermia and Magnetic Resonance Imaging Contrast Performance of Cubic Iron Oxide Nanoparticles with Crystal Structural Integrity

Magnetic iron oxide nanoparticles have multiple biomedical applications in AC-field hyperthermia and magnetic resonance imaging (MRI) contrast enhancement. Here, two cubic particle suspensions are analyzed in detail, one suspension displayed strong magnetic heating and MRI contrast efficacies, while the other responded weakly. This is despite them having almost identical size, morphology, and colloidal dispersion. Aberration-corrected scanning transmission electron microscopy, electron energy loss spectroscopy, and high-resolution transmission electron microscopy analysis confirmed that the spinel phase Fe₃O₄ was present in both samples and identified prominent crystal lattice defects for the weakly responding one. These are interpreted as frustrating the orientation of the moment within the cubic crystals. The relationship between crystal integrity and the moment magnitude and dynamics is elucidated for the case of fully dispersed single nanocubes, and its connection with the emergent hyperthermia and MRI contrast responses is established.

Direct Ink Printing of PVdF Composite Polymer Electrolytes with Aligned BN Nanosheets for Lithium-Metal Batteries

The use of polymer electrolytes is of great interest for lithium-metal batteries (LMBs) due to their stability with lithium metal. However, the low thermal conductivity of polymer electrolytes poses a significant barrier to minimizing the formation of local hot spots during electrochemical reactions in lithium batteries that may lead to dendritic plating of Li or thermal runaway events. Electrolyte nanocomposites with proper distribution of thermally conductive nanomaterials offer an opportunity to address this shortcoming. Utilizing a custom-designed direct ink writing (DIW) process, we show that highly aligned boron nitride (BN) nanosheets can be embedded in poly(vinylidene fluoride-hexafluoropropylene) (PVdF) polymer composite electrolytes (CPE-BN), enabling novel architectural designs for safe Li-metal batteries. It is observed that the CPE-BN electrolytes possess a 400% increase in their in-plane thermal conductivity, which enables faster heat distribution in the CPE-BN electrolyte compared to the polymer electrolytes without BN nanosheets. The CPE-BN containing symmetric lithium cell exhibits stable Li plating/stripping for over 2000 cycles without short-circuiting due to the suppression of dendritic lithium. The lithium-ion half-cells made with the CPE-BN show stable cycling performance at 1C charge-discharge rate for 250 cycles with 90% capacity retention. This reported DIW-printed PVdF composite polymer electrolyte could be used as a model for developing new architectures for other electrolytes or electrodes, thus enabling new chemistry and improved performances in energy-storage devices.

Interface Engineering Between Multi-Elemental Alloy Nanoparticles and a Carbon Support Toward Stable Catalysts

Multi-elemental alloy (MEA) nanoparticles have recently received notable attention owing to their high activity and superior phase stability. Previous syntheses of MEA nanoparticles mainly used carbon as the support, owing to its high surface area, good electrical conductivity, and tunable defective sites. However, the interfacial stability issue, such as nanoparticle agglomeration, remains outstanding due to poor interfacial binding between MEA and carbon. Such a problem often causes performance decay when MEA nanoparticles are used as catalysts, hindering their practical applications. Herein, an interface engineering strategy is developed to synthesize MEA-oxide-carbon hierarchical catalysts, where the oxide on carbon helps disperse and stabilize the MEA nanoparticles toward superior thermal and electrochemical stability. Using several MEA compositions (PdRuRh, PtPdIrRuRh, and PdRuRhFeCoNi) and oxides (TiO₂ and Cr₂ O₃ ) as model systems, it is shown that adding the oxide renders superior interfacial stability and therefore excellent catalytic performance. Excellent thermal stability is demonstrated under transmission electron microscopy with in situ heating up to 1023 K, as well as via long-term cycling (>370 hours) of a Li-O₂ battery as a harsh electrochemical condition to challenge the catalyst stability. This work offers a new route toward constructing efficient and stable catalysts for various applications.

A Smart Lithium Battery with Shape Memory Function

Rapidly growing flexible and wearable electronics highly demand the development of flexible energy storage devices. Yet, these devices are susceptible to extreme, repeated mechanical deformations under working circumstances. Herein, the design and fabrication of a smart, flexible Li-ion battery with shape memory function, which has the ability to restore its shape against severe mechanical deformations, bending, twisting, rolling or elongation, is reported. The shape memory function is induced by the integration of a shape-adjustable solid polymer electrolyte. This Li-ion battery delivers a specific discharge capacity of ≈140 mAh g^-1 at 0.2 C charge/discharge rate with ≈92% capacity retention after 100 cycles and ≈99.85% Coulombic efficiency, at 20 °C. Besides recovery from mechanical deformations, it is visually demonstrated that the shape of this smart battery can be programmed to adjust itself in response to an internal/external heat stimulus for task-specific and advanced applications. Considering the vast range of available shape memory polymers with tunable chemistry, physical, and mechanical characteristics, this study offers a promising approach for engineering smart batteries responsive to unfavorable internal or external stimulus, with potential to have a broad impact on other energy storage technologies in different sizes and shapes.

Atomistic Insights of Irreversible Li+ Intercalation in MnO2 Electrode

Tunnel-structured MnO₂ represents open-framed electrode materials for reversible energy storage. Its wide application is limited by its poor cycling stability, whose structural origin is unclear. We tracked the structure evolution of β-MnO₂ upon Li⁺ ion insertion/extraction by combining advanced in situ diagnostic tools at both electrode level (synchrotron X-ray scattering) and single-particle level (transmission electron microscopy). The instability is found to originate from a partially reversible phase transition between β-MnO₂ and orthorhombic LiMnO₂ upon lithiation, causing cycling capacity decay. Moreover, the MnO₂ /LiMnO₂ interface exhibits multiple arrow-headed disordered regions, which severely chop into the host and undermine its structural integrity. Our findings could account for the cycling instability of tunnel-structured materials, based on which future strategies should focus on tuning the charge transport kinetics toward performance enhancement.

Scalable Synthesis of High Entropy Alloy Nanoparticles by Microwave Heating

High entropy alloy nanoparticles (HEA-NPs) are reported to have superior performance in catalysis, energy storage, and conversion due to the broad range of elements that can be incorporated in these materials, enabling tunable activity, excellent thermal and chemical stability, and a synergistic catalytic effect. However, scaling the manufacturing of HEA-NPs with uniform particle size and homogeneous elemental distribution efficiently is still a challenge due to the required critical synthetic conditions where high temperature is typically involved. In this work, we demonstrate an efficient and scalable microwave heating method using carbon-based materials as substrates to fabricate HEA-NPs with uniform particle size. Due to the abundant functional group defects that can absorb microwave efficiently, reduced graphene oxide is employed as a model substrate to produce an average temperature reaching as high as ∼1850 K within seconds. As a proof-of-concept, we utilize this rapid, high-temperature heating process to synthesize PtPdFeCoNi HEA-NPs, which exhibit an average particle size of ∼12 nm and uniform elemental mixing resulting from decomposition nearly at the same time and liquid metal solidification without diffusion. Various carbon-based materials can also be employed as substrates, including one-dimensional carbon nanofibers and three-dimensional carbonized wood, which can achieve temperatures of >1400 K. This facile and efficient microwave heating method is also compatible with the roll-to-roll process, providing a feasible route for scalable HEA-NPs manufacturing.

Gold-like activity copper-like selectivity of heteroatomic transition metal carbides for electrocatalytic carbon dioxide reduction reaction

An overarching challenge of the electrochemical carbon dioxide reduction reaction (eCO₂RR) is finding an earth-abundant, highly active catalyst that selectively produces hydrocarbons at relatively low overpotentials. Here, we report the eCO₂RR performance of two-dimensional transition metal carbide class of materials. Our results indicate a maximum methane (CH₄) current density of −421.63 mA/cm² and a CH₄ faradic efficiency of 82.7% ± 2% for di-tungsten carbide (W₂C) nanoflakes in a hybrid electrolyte of 3 M potassium hydroxide and 2 M choline-chloride. Powered by a triple junction photovoltaic cell, we demonstrate a flow electrolyzer that uses humidified CO₂ to produce CH₄ in a 700-h process under one sun illumination with a CO₂RR energy efficiency of about 62.3% and a solar-to-fuel efficiency of 20.7%. Density functional theory calculations reveal that dissociation of water, chemisorption of CO₂ and cleavage of the C-O bond—the most energy consuming elementary steps in other catalysts such as copper—become nearly spontaneous at the W₂C surface. This results in instantaneous formation of adsorbed CO—an important reaction intermediate—and an unlimited source of protons near the tungsten surface sites that are the main reasons for the observed superior activity, selectivity, and small potential.

It is of high interests to develop new catalysts for selective CO2 electroreduction. Here the authors investigate two-dimensional transition metal carbides for CO2 to methane conversion with superior activity, selectivity and low overpotentials.

Ultrafast Synthesis of High Entropy Oxide Nanoparticles by Flame Spray Pyrolysis

The synthesis of high entropy oxide (HEO) nanoparticles (NPs) possesses many challenges in terms of process complexity and cost, scalability, tailoring nanoparticle morphology, and rapid synthesis. Herein, we report the synthesis of novel single-phase solid solution (Mn, Fe, Ni, Cu, Zn)₃(O)₄ quinary HEO NPs produced by a flame spray pyrolysis route. The aberration-corrected scanning transmission electron microscopy (STEM) technique is utilized to investigate the spinel crystal structure of synthesized HEO NPs, and energy-dispersive X-ray spectroscopy analysis confirmed the high entropy configuration of five metal elements in their oxide form within a single HEO nanoparticle. Selected area electron diffraction, X-ray diffraction, and Raman spectroscopy analysis results are in accordance with STEM results, providing the key attributes of a spinel crystal structure of HEO NPs. X-ray photoelectron spectroscopy results provide the insightful understanding of chemical oxidation states of individual elements and their possible cation occupancy sites in the spinel-structured HEO NPs.

Revealing High-Temperature Reduction Dynamics of High-Entropy Alloy Nanoparticles via In Situ Transmission Electron Microscopy

Understanding the behavior of high-entropy alloy (HEA) materials under hydrogen (H₂) environment is of utmost importance for their promising applications in structural materials, catalysis, and energy-related reactions. Herein, the reduction behavior of oxidized FeCoNiCuPt HEA nanoparticles (NPs) in atmospheric pressure H₂ environment was investigated by in situ gas-cell transmission electron microscopy (TEM). The reduction reaction front was maintained at the external surface of the oxide. During reduction, the oxide layer expanded and transformed into porous structures where oxidized Cu was fully reduced to Cu NPs while Fe, Co, and Ni remained in the oxidized form. In situ chemical analysis showed that the expansion of the oxide layer resulted from the outward diffusion flux of all transition metals (Fe, Co, Ni, Cu). Revealing the H₂ reduction behavior of HEA NPs facilitates the development of advanced multicomponent alloys for applications targeting H₂ formation and storage, catalytic hydrogenation, and corrosion removal.

Cation Additive Enabled Rechargeable LiOH-Based Lithium-Oxygen Batteries

Lithium-oxygen (Li-O₂ ) batteries have attracted extensive research interest due to their high energy density. Other than Li₂ O₂ (a typical discharge product in Li-O₂ batteries), LiOH has proved to be electrochemically active as an alternative product. Here we report a simple strategy to achieve a reversible LiOH-based Li-O₂ battery by using a cation additive, sodium ions, to the lithium electrolyte. Without redox mediators in the cell, LiOH is detected as the sole discharge product and it charges at a low charge potential of 3.4 V. A solution-based reaction route is proposed, showing that the competing solvation environment of the catalyst and Li⁺ leads to LiOH precipitation at the cathode. It is critical to tune the cell chemistry of Li-O₂ batteries by designing a simple system to promote LiOH formation/decomposition.

Kinetically Stable Oxide Overlayers on Mo3 P Nanoparticles Enabling Lithium-Air Batteries with Low Overpotentials and Long Cycle Life

The main drawbacks of today's state-of-the-art lithium-air (Li-air) batteries are their low energy efficiency and limited cycle life due to the lack of earth-abundant cathode catalysts that can drive both oxygen reduction and evolution reactions (ORR and OER) at high rates at thermodynamic potentials. Here, inexpensive trimolybdenum phosphide (Mo₃ P) nanoparticles with an exceptional activity-ORR and OER current densities of 7.21 and 6.85 mA cm^-2 at 2.0 and 4.2 V versus Li/Li⁺ , respectively-in an oxygen-saturated non-aqueous electrolyte are reported. The Tafel plots indicate remarkably low charge transfer resistance-Tafel slopes of 35 and 38 mV dec^-1 for ORR and OER, respectively-resulting in the lowest ORR overpotential of 4.0 mV and OER overpotential of 5.1 mV reported to date. Using this catalyst, a Li-air battery cell with low discharge and charge overpotentials of 80 and 270 mV, respectively, and high energy efficiency of 90.2% in the first cycle is demonstrated. A long cycle life of 1200 is also achieved for this cell. Density functional theory calculations of ORR and OER on Mo₃ P (110) reveal that an oxide overlayer formed on the surface gives rise to the observed high ORR and OER electrocatalytic activity and small discharge/charge overpotentials.

Beyond Volume Variation: Anisotropic and Protrusive Lithiation in Bismuth Nanowire

Materials storing energy via an alloying reaction are promising anode candidates in rechargeable lithium-ion batteries (LIBs) due to their much higher energy density than the current graphite anode. Until now, the volumetric expansion of such electrode particles during lithiation has been considered as solely responsible for cycling-induced structural failure. In this work, we report different structural failure mechanisms using single-crystalline bismuth nanowires as the alloying-based anode. The Li-Bi alloying process exhibits a two-step transition, that is, Bi-Li₁Bi and Li₁Bi-Li₃Bi. Interestingly, the Bi-Li₁Bi phase transition occurs not only in the bulk Bi nanowire but also on the particle surface showing its characteristic behavior. The bulk alloying kinetics favors a Bi-(012)-facilitated anisotropic lithiation, whose mechanism and energetics are further studied using the density functional theory calculations. More importantly, the protrusion of Li₁Bi nanograins as a result of anisotropic Li-Bi alloying is found to dominate the surface morphology of Bi particles. The growth kinetics of Li₁Bi protrusions is understood atomically with the identification of two different controlling mechanisms, that is, the dislocation-assisted strain relaxation at the Bi/Li₁Bi interface and the short-range migration of Bi supporting the off-Bi growth of Li₁Bi. As loosely rooted to the bulk substrate and easily peeled off and detached into the electrolyte, these nanoscale protrusions developed during battery cycling are believed to be an important factor responsible for the capacity decay of such alloying-based anodes at the electrode level.

In Situ Oxidation Studies of High-Entropy Alloy Nanoparticles

Although high-entropy alloys (HEAs) have shown tremendous potential for elevated temperature, anticorrosion, and catalysis applications, little is known on how HEA materials behave under complex service environments. Herein, we studied the high-temperature oxidation behavior of Fe_0.28Co_0.21Ni_0.20Cu_0.08Pt_0.23HEA nanoparticles (NPs) in an atmospheric pressure dry air environment by in situ gas-cell transmission electron microscopy. It is found that the oxidation of HEA NPs is governed by Kirkendall effects with logarithmic oxidation rates rather than parabolic as predicted by Wagner's theory. Further, the HEA NPs are found to oxidize at a significantly slower rate compared to monometallic NPs. The outward diffusion of transition metals and formation of disordered oxide layer are observed in real time and confirmed through analytical energy dispersive spectroscopy, and electron energy loss spectroscopy characterizations. Localized ordered lattices are identified in the oxide, suggesting the formation of Fe₂O₃, CoO, NiO, and CuO crystallites in an overall disordered matrix. Hybrid Monte Carlo and molecular dynamics simulations based on first-principles energies and forces support these findings and show that the oxidation drives surface segregation of Fe, Co, Ni, and Cu, while Pt stays in the core region. The present work offers key insights into how HEA NPs behave under high-temperature oxidizing environment and sheds light on future design of highly stable alloys under complex service conditions.

Revealing nanoscale mineralization pathways of hydroxyapatite using in situ liquid cell transmission electron microscopy

To treat impairments in hard tissues or overcome pathological calcification in soft tissues, a detailed understanding of mineralization pathways of calcium phosphate materials is needed. Here, we report a detailed mechanistic study of hydroxyapatite (HA) mineralization pathways in an artificial saliva solution via in situ liquid cell transmission electron microscopy (TEM). It is found that the mineralization of HA starts by forming ion-rich and ion-poor solutions in the saliva solution, followed by coexistence of the classical and nonclassical nucleation processes. For the nonclassical path, amorphous calcium phosphate (ACP) functions as the substrate for HA nucleation on the ACP surface, while the classical path features direct HA nucleation from the solution. The growth of HA crystals on the surface of ACP is accompanied by the ACP dissolution process. The discoveries reported in this work are important to understand the physiological and pathological formation of HA minerals, as well as to engineer the biomineralization process for bone healing and hard tissue repairs.

Continuous Synthesis of Hollow High-Entropy Nanoparticles for Energy and Catalysis Applications

Mixing multimetallic elements in hollow-structured nanoparticles is a promising strategy for the synthesis of highly efficient and cost-effective catalysts. However, the synthesis of multimetallic hollow nanoparticles is limited to two or three elements due to the difficulties in morphology control under the harsh alloying conditions. Herein, the rapid and continuous synthesis of hollow high-entropy-alloy (HEA) nanoparticles using a continuous "droplet-to-particle" method is reported. The formation of these hollow HEA nanoparticles is enabled through the decomposition of a gas-blowing agent in which a large amount of gas is produced in situ to "puff" the droplet during heating, followed by decomposition of the metal salt precursors and nucleation/growth of multimetallic particles. The high active sites per mass ratio of such hollow HEA nanoparticles makes them promising candidates for energy and electrocatalysis applications. As a proof-of-concept, it is demonstrated that these materials can be applied as the cathode catalyst for Li-O₂ battery operations with a record-high current density per catalyst mass loading of 2000 mA g_cat. ^-1 , as well as good stability and durable catalytic activity. This work offers a viable strategy for the continuous manufacturing of hollow HEA nanomaterials that can find broad applications in energy and catalysis.

Consolidating Lithiothermic-Ready Transition Metals for Li2 S-Based Cathodes

Li₂ S holds a promising role as a high-capacity Li-containing cathode, circumventing use of metallic lithium in constructing next-generation batteries to replace current Li-ion batteries. However, progress of Li₂ S cathode has been plagued by its intrinsic drawbacks, including high activation potentials, poor rate performance, and rapid capacity fading during long cycling. Herein, a series of Li₂ S/transition metal (TM) nanocomposites are synthesized via a lithiothermic reduction reaction, and it is realized that the presence of TMs in Li₂ S matrix can transform electrochemical behaviors of Li₂ S. On the one hand, the incorporation of W, Mo, or Ti greatly increases electronic and ionic conductivity of Li₂ S composites and inhibits the polysulfide dissolution via the TMS bond, effectively addressing the drawbacks of Li₂ S cathodes. In particular, Li₂ S/W and Li₂ S/Mo exhibit the highest ionic conductivity of solid-phase Li-ion conductors ever-reported: 5.44 × 10^-2 and 3.62 × 10^-2 S m^-1 , respectively. On the other hand, integrating Co, Mn, and Zn turns Li₂ S into a prelithiation agent, forming metal sulfides rather than S₈ after the full charge. These interesting findings may shed light on the design of Li₂ S-based cathode materials.

From Sodium-Oxygen to Sodium-Air Battery: Enabled by Sodium Peroxide Dihydrate

Metal-air batteries have attracted extensive research interests due to their high theoretical energy density. However, most of the previous studies were limited by applying pure oxygen in the cathode, sacrificing the gravimetric and volumetric energy density. Here, we develop a real sodium-"air" battery, in which the rechargeability of the battery relies on the reversible reaction of the formation of sodium peroxide dihydrate (Na₂O₂·2H₂O). After an oxygen evolution reaction catalyst is applied, the charge overpotential is largely reduced to achieve a high energy efficiency. The sodium-air batteries deliver high areal capacity of 4.2 mAh·cm^-2 and have a decent cycle life of 100 cycles. The oxygen crossover effect is largely suppressed by replacing the oxygen with air, whereas the dense solid electrolyte interphase formed on the sodium anode further prolongs the cycle life.

TEM Studies on Antibacterial Mechanisms of Black Phosphorous Nanosheets

PURPOSE

Recently, two-dimensional (2D) nanomaterials are gaining tremendous attention as novel antibacterial platforms to combat against continuously evolving antimicrobial resistance levels. Among the family of 2D nanomaterials, black phosphorus (BP) nanosheets have demonstrated promising potential for biomedical applications. However, there is a need to gain nanoscale insights of the antibacterial activity of BP nanosheets which lies at the center of technical challenges.

METHODS

Ultra-large BP nanosheets were synthesized by liquid-exfoliation method in the eco-friendly deoxygenated water. Synthesized BP nanosheets were characterized by TEM, AFM, and Raman spectroscopy techniques and their chemical stability was evaluated by EDS and EELS elemental analysis. The antibacterial activity of BP nanosheets was evaluated at nanoscale by the ultramicrotome TEM technique. Further, HAADF-STEM image and EDS elemental line map of the damaged bacterium were utilized to analyze the presence of diagnostic ions. Supportive SEM and ATR-FTIR studies were carried out to confirm the bacterial cell wall damage. In vitro colony counting method was utilized to evaluate the antibacterial performance of ultra-large BP nanosheets.

RESULTS

Elemental EELS and EDS analysis of BP nanosheets stored in deoxygenated water confirmed the absence of oxygen peak. TEM studies indicate the various events of bacterial cell damage with the lost cellular metabolism and structural integrity. Colony counting test results show that as-synthesized BP nanosheets (100 μg/mL) can kill ~95% bacteria within 12 hours.

CONCLUSION

TEM studies demonstrate the various events of E. coli membrane damage and the loss of structural integrity. These events include the BP nanosheets interaction with the bacterial cell wall, cytoplasmic leakage, detachment of cytoplasm from the cell membrane, reduced density of lipid bilayer and agglomerated DNA structure. The EDS elemental line mapping of the damaged bacterium confirms the disrupted cell membrane permeability and the lost cellular metabolism. SEM micrographs and ATR-FTIR supportive results confirm the bacterial cell wall damage.

In Situ Visualization of Ferritin Biomineralization via Graphene Liquid Cell-Transmission Electron Microscopy

Ferritin biomineralization is essential to regulate the toxic Fe²⁺ iron ions in the human body. Unravelling the mechanism of biomineralization in ferritin facilitates our understanding of the causes underlying many iron disorder-related diseases. Until now, no report of in situ visualization of ferritin biomineralization events at nanoscale exists due to the requirement for high-resolution imaging of nanometer-sized ferritin proteins in their hydrated states. Herein, for the first time, we show that the biomineralization processes within individual ferritin proteins can be visualized by means of graphene liquid cell-transmission electron microscopy (GLC-TEM). The increase in the ratio of Fe³⁺/Fe²⁺ ions over time monitored via electron energy loss spectroscopy (EELS) reveals the change in oxidation state of iron oxide phases with time. This study lays a foundation for future investigations on iron regulation mechanisms in healthy and dysfunctional ferritins.

Revealing Sintering Kinetics of MoS2-Supported Metal Nanocatalysts in Atmospheric Gas Environments via Operando Transmission Electron Microscopy

The decoration of two-dimensional (2D) substrates with nanoparticles (NPs) serve as heterostructures for various catalysis applications. Deep understanding of catalyst degradation mechanisms during service conditions is crucial to improve the catalyst durability. Herein, we studied the sintering behavior of Pt and bimetallic Au-core Pt-shell (Au@Pt core-shell) NPs on MoS₂ supports at high temperatures under vacuum, nitrogen (N₂), hydrogen (H₂), and air environments by in situ gas-cell transmission electron microscopy (TEM). The key observations are summarized as effect of environment: while particle migration and coalescence (PMC) was the main mechanism that led to Pt and Au@Pt NPs degradation under vacuum, N₂, and H₂ environments, the degradation of MoS₂ substrate was prominent under exposure to air at high temperatures. Pt NPs were less stable in H₂ environment when compared with the Pt NPs under vacuum or N₂, due to Pt-H interactions that weakened the adhesion of Pt on MoS₂. Effect of NP composition: under H₂, the stability of Au@Pt NPs was higher in comparison to Pt NPs. This is because H₂ promotes the alloying of Pt-Au, thus reducing the number of Pt at the surface (reducing H₂ interactions) and increasing Pt atoms in contact with MoS₂. Effect of NP size: The alloying effect promoted by H₂ was more pronounced in small size Au@Pt NPs resulting in their higher sintering resistance in comparison to large size Au@Pt NPs and similar size Pt NPs. The present work provides key insights into the parameters affecting the catalyst degradation mechanisms on 2D supports.

Synthesis of high-entropy alloy nanoparticles on supports by the fast moving bed pyrolysis

High-entropy alloy nanoparticles (HEA-NPs) are important class of materials with significant technological potential. However, the strategies for synthesizing uniformly dispersed HEA-NPs on granular supports such as carbon materials, γ-Al₂O₃, and zeolite, which is vital to their practical applications, are largely unexplored. Herein, we present a fast moving bed pyrolysis strategy to immobilize HEA-NPs on granular supports with a narrow size distribution of 2 nm up to denary (MnCoNiCuRhPdSnIrPtAu) HEA-NPs at 923 K. Fast moving bed pyrolysis strategy ensures the mixed metal precursors rapidly and simultaneously pyrolyzed at high temperatures, resulting in nuclei with a small size. The representative quinary (FeCoPdIrPt) HEA-NPs exhibit high stability (150 h) toward hydrogen evolution reaction with high mass activity, which is 26 times higher than the commercial Pt/C at an overpotential of 100 mV. Our strategy provides an improved methodology for synthesizing HEA-NPs on various supports.

The large-scale application of extremely small, high-entropy alloy nanoparticles is limited by the phase separation and immobilization. Here, the authors develop a general method of fast-moving bed pyrolysis, uniformly dispersing high-entropy alloy nanoparticles on various granular supports.

Solution Blowing Synthesis of Li-Conductive Ceramic Nanofibers

Solid state electrolytes (SSEs) offer great potential to enable high-performance and safe lithium (Li) batteries. However, the scale-up synthesis and processing of SSEs is a major challenge. In this work, three-dimensional networks of lithium lanthanum titanite (LLTO) nanofibers are produced through a scale-up technique based on solution blowing. Compared with the conventional electrospinning method, the solution blowing technique enables high-speed fabrication of SSEs (e.g., 15 times faster) with superior productivity and quality. Additionally, the room-temperature ionic conductivity of composite polymer electrolytes (CPEs) formed from solution-blown LLTO fibers is 70% higher than the ones formed from electrospun fibers (1.9 × 10 ^-4 vs 1.1 × 10^-4 S cm^-1 for 10 wt % LLTO fibers). Furthermore, the cyclability of the CPEs made from solution-blown fibers in the symmetric Li cell is more than 2.5 times that of the CPEs made from electrospun fibers. These comparisons show that solution-blown ion-conductive fibers hold great promise for applications in Li metal batteries.

High-Performance, Long-Life, Rechargeable Li-CO2 Batteries based on a 3D Holey Graphene Cathode Implanted with Single Iron Atoms

A highly efficient cathode catalyst for rechargeable Li-CO₂ batteries is successfully synthesized by implanting single iron atoms into 3D porous carbon architectures, consisting of interconnected N,S-codoped holey graphene (HG) sheets. The unique porous 3D hierarchical architecture of the catalyst with a large surface area and sufficient space within the interconnected HG framework can not only facilitate electron transport and CO₂ /Li⁺ diffusion, but also allow for a high uptake of Li₂ CO₃ to ensure a high capacity. Consequently, the resultant rechargeable Li-CO₂ batteries exhibit a low potential gap of ≈1.17 V at 100 mA g^-1 and can be repeatedly charged and discharged for over 200 cycles with a cut-off capacity of 1000 mAh g^-1 at a high current density of 1 A g^-1 . Density functional theory calculations are performed and the observed appealing catalytic performance is correlated with the hierarchical structure of the carbon catalyst. This work provides an effective approach to the development of highly efficient cathode catalysts for metal-CO₂ batteries and beyond.

Two-Dimensional Materials to Address the Lithium Battery Challenges

Despite the ever-growing demand in safe and high power/energy density of Li⁺ ion and Li metal rechargeable batteries (LIBs), materials-related challenges are responsible for the majority of performance degradation in such batteries. These challenges include electrochemically induced phase transformations, repeated volume expansion and stress concentrations at interfaces, poor electrical and mechanical properties, low ionic conductivity, dendritic growth of Li, oxygen release and transition metal dissolution of cathodes, polysulfide shuttling in Li-sulfur batteries, and poor reversibility of lithium peroxide/superoxide products in Li-O₂ batteries. Owing to compelling physicochemical and structural properties, in recent years two-dimensional (2D) materials have emerged as promising candidates to address the challenges in LIBs. This Review highlights the cutting-edge advances of LIBs by using 2D materials as cathodes, anodes, separators, catalysts, current collectors, and electrolytes. It is shown that 2D materials can protect the electrode materials from pulverization, improve the synergy of Li⁺ ion deposition, facilitate Li⁺ ion flux through electrolyte and electrode/electrolyte interfaces, enhance thermal stability, block the lithium polysulfide species, and facilitate the formation/decomposition of Li-O₂ discharge products. This work facilitates the design of safe Li batteries with high energy and power density by using 2D materials.

Correlative ex situ and Liquid-Cell TEM Observation of Bacterial Cell Membrane Damage Induced by Rough Surface Topology

BACKGROUND

Nanoscale surface roughness has been suggested to have antibacterial and antifouling properties. Several existing models have attempted to explain the antibacterial mechanism of nanoscale rough surfaces without direct observation. Here, conventional and liquid-cell TEM are implemented to observe nanoscale bacteria/surface roughness interaction. The visualization of such interactions enables the inference of possible antibacterial mechanisms.

METHODS AND RESULTS

Nanotextures are synthesized on biocompatible polymer microparticles (MPs) via plasma etching. Both conventional and liquid-phase transmission electron microscopy observations suggest that these MPs may cause cell lysis via bacterial binding to a single protrusion of the nanotexture. The bacterium/protrusion interaction locally compromises the cell wall, thus causing bacterial death. This study suggests that local mechanical damage and leakage of the cytosol kill the bacteria first, with subsequent degradation of the cell envelope.

CONCLUSION

Nanoscale surface roughness may act via a penetrative bactericidal mechanism. This insight suggests that future research may focus on optimizing bacterial binding to individual nanoscale projections in addition to stretching bacteria between nanopillars. Further, antibacterial nanotextures may find use in novel applications employing particles in addition to nanotextures on fibers or films.

Aerosol Synthesis of High Entropy Alloy Nanoparticles

Homogeneously mixing multiple metal elements within a single particle may offer new material property functionalities. High entropy alloys (HEAs), nominally defined as structures containing five or more well-mixed metal elements, are being explored at the nanoscale, but the scale-up to enable their industrial application is an extremely challenging problem. Here, we report an aerosol droplet-mediated technique toward scalable synthesis of HEA nanoparticles with atomic-level mixing of immiscible metal elements. An aqueous solution of metal salts is nebulized to generate ∼1 μm aerosol droplets, which when subjected to fast heating/quenching result in decomposition of the precursors and freezing-in of the zero-valent metal atoms. Atomic-level resolution scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy analysis reveals that all metal elements in the nanoparticles are homogeneously mixed at the atomic level. We believe that this approach offers a facile and flexible aerosol droplet-mediated synthesis technique that will ultimately enable bulk processing starting from a particulate HEA.

Computationally aided, entropy-driven synthesis of highly efficient and durable multi-elemental alloy catalysts

Multi-elemental alloy nanoparticles (MEA-NPs) hold great promise for catalyst discovery in a virtually unlimited compositional space. However, rational and controllable synthesize of these intrinsically complex structures remains a challenge. Here, we report the computationally aided, entropy-driven design and synthesis of highly efficient and durable catalyst MEA-NPs. The computational strategy includes prescreening of millions of compositions, prediction of alloy formation by density functional theory calculations, and examination of structural stability by a hybrid Monte Carlo and molecular dynamics method. Selected compositions can be efficiently and rapidly synthesized at high temperature (e.g., 1500 K, 0.5 s) with excellent thermal stability. We applied these MEA-NPs for catalytic NH₃ decomposition and observed outstanding performance due to the synergistic effect of multi-elemental mixing, their small size, and the alloy phase. We anticipate that the computationally aided rational design and rapid synthesis of MEA-NPs are broadly applicable for various catalytic reactions and will accelerate material discovery.

Hydrous Nickel-Iron Turnbull's Blue as a High-Rate and Low-Temperature Proton Electrode

Proton batteries are emerging as a promising solution for energy storage; however, their development has been hindered by the lack of suitable cathode materials. Herein, a hydrous Turnbull's blue analogue (TBA) of Ni[Fe(CN)₆]_2/3·4H₂O has been investigated as a viable proton cathode. Particularly, it shows an extremely high rate performance up to 6000 C (390 A g^-1) at room temperature and delivers good capacity values at a low temperature of -40 °C in an aqueous electrolyte. The excellent rate capability is also amenable to high mass loadings of 10 mg cm^-2. Such fast and low-temperature rate behavior likely stems from the fast proton conduction that is afforded by the Grotthuss mechanism inside the TBA structure. Furthermore, advanced characterization, including in operando synchrotron X-ray diffraction (XRD), and X-ray absorption near-edge structure (XANES) were employed to understand the changes of crystal structures and the oxidation-states of metal elements of the electrodes.

Oxygen Functionalized Copper Nanoparticles for Solar-Driven Conversion of Carbon Dioxide to Methane

Solar conversion of carbon dioxide (CO₂) into hydrocarbon fuels offers a promising approach to fulfill the world's ever-increasing energy demands in a sustainable way. However, a highly active catalyst that can also tune the selectivity toward desired products must be developed for an effective process. Here, we present oxygen functionalized copper (OFn-Cu) nanoparticles as a highly active and methane (CH₄) selective catalyst for the electrocatalytic CO₂ reduction reaction. Our electrochemical results indicate that OFn-Cu (5 nm) nanoparticles with an oxidized layer at the surface reach a maximum CH₄ formation current density and turnover frequency of 36.24 mA/cm² and of 0.17 s^-1 at the potential of -1.05 V vs RHE, respectively, exceeding the performance of existing Cu and Cu-based catalysts. Characterization results indicate that the surface of the OFn-Cu nanoparticles consists of an oxygen functionalized layer in the form of Cu²⁺ (CuO) separated from the underneath elemental Cu by a Cu⁺ (Cu₂O) sublayer. Density functional theory calculations also confirm that presence of the O site at the CuO (101) surface is the main reason for the enhanced activity and selectivity. Using this catalyst, we have demonstrated a flow cell with an active area of 25 cm² that utilizes solar energy to produce 7.24 L of CH₄ after 10 h of continuous process at a cell power density of 30 mW/cm².

Revealing Grain-Boundary-Induced Degradation Mechanisms in Li-Rich Cathode Materials

Despite their high energy densities, Li- and Mn-rich, layered-layered, xLi₂MnO₃·(1 - x)LiTMO₂ (TM = Ni, Mn, Co) (LMR-NMC) cathodes require further development in order to overcome issues related to bulk and surface instabilities such as Mn dissolution, impedance rise, and voltage fade. One promising strategy to modify LMR-NMC properties has been the incorporation of spinel-type, local domains to create "layered-layered-spinel" cathodes. However, precise control of local structure and composition, as well as subsequent characterization of such materials, is challenging and elucidating structure-property relationships is not trivial. Therefore, detailed studies of atomic structures within these materials are still critical to their development. Herein, aberration corrected-scanning transmission electron microscopy (AC-STEM) is utilized to study atomic structures, prior to and subsequent to electrochemical cycling, of LMR-NMC materials having integrated spinel-type components. The results demonstrate that strained grain boundaries with various atomic configurations, including spinel-type structures, can exist. These high energy boundaries appear to induce cracking and promote dissolution of Mn by increasing the contact surface area to electrolyte as well as migration of Ni during cycling, thereby accelerating performance degradation. These results present insights into the important role that local structures can play in the macroscopic degradation of the cathode structures and reiterate the complexity of how synthesis and composition affect structure-electrochemical property relationships of advanced cathode designs.

Non-Dendritic Zn Electrodeposition Enabled by Zincophilic Graphene Substrates

Rechargeable zinc (Zn) batteries suffer from poor cycling performance that can be attributed to dendrite growth and surface-originated side reactions. Herein, we report that cycling performance of Zn metal anode can be improved significantly by utilizing monolayer graphene (Gr) as the electrodeposition substrate. Utilizing microscopy and X-ray diffraction techniques, we demonstrate that electrodeposited Zn on Gr substrate has a compact, uniform, and nondendritic character. The Gr layer, due to its high lattice compatibility with Zn, provides low nucleation overpotential sites for Zn electrodeposition. Atomistic calculations indicate that Gr has strong affinity to Zn (binding energy of 4.41 eV for Gr with four defect sites), leading to uniform distribution of Zinc adatoms all over the Gr surface. This synergistic compatibility between Gr and Zn promotes subsequent homogeneous and planar Zn deposits with low interfacial energy (0.212 J/m²) conformal with the current collector surface.

Correlation between manganese dissolution and dynamic phase stability in spinel-based lithium-ion battery

Historically long accepted to be the singular root cause of capacity fading, transition metal dissolution has been reported to severely degrade the anode. However, its impact on the cathode behavior remains poorly understood. Here we show the correlation between capacity fading and phase/surface stability of an LiMn₂O₄ cathode. It is revealed that a combination of structural transformation and transition metal dissolution dominates the cathode capacity fading. LiMn₂O₄ exhibits irreversible phase transitions driven by manganese(III) disproportionation and Jahn-Teller distortion, which in conjunction with particle cracks results in serious manganese dissolution. Meanwhile, fast manganese dissolution in turn triggers irreversible structural evolution, and as such, forms a detrimental cycle constantly consuming active cathode components. Furthermore, lithium-rich LiMn₂O₄ with lithium/manganese disorder and surface reconstruction could effectively suppress the irreversible phase transition and manganese dissolution. These findings close the loop of understanding capacity fading mechanisms and allow for development of longer life batteries.

To unlock the potential of Mn-based cathode materials, the fast capacity fading process has to be first understood. Here the authors utilize advanced characterization techniques to look at a spinel LiMn₂O₄ system, revealing that a combination of irreversible structural transformations and Mn dissolution takes responsibility.

On the structure and chemistry of iron oxide cores in human heart and human spleen ferritins using graphene liquid cell electron microscopy

Ferritin is a protein that regulates the iron ions in humans by storing them in the form of iron oxides. Despite extensive efforts to understand the ferritin iron oxide structures, it is still not clear how ferritin proteins with a distinct light (L) and heavy (H) chain subunit ratio impact the biomineralization process. In situ graphene liquid cell-transmission electron microscopy (GLC-TEM) provides an indispensable platform to study the atomic structure of ferritin mineral cores in their native liquid environment. In this study, we report differences in the iron oxide formation in human spleen ferritins (HSFs) and human heart ferritins (HHFs) using in situ GLC-TEM. Scanning transmission electron microscopy (STEM) along with selected area electron diffraction (SAED) of the mineral core and electron energy loss spectroscopy (EELS) analyses enabled the visualization of morphologies, crystal structures and the chemistry of iron oxide cores in HSFs and HHFs. Our study revealed the presence of metastable ferrihydrite (5Fe2O3·9H2O) as a dominant phase in hydrated HSFs and HHFs, while a stable hematite (α-Fe2O3) phase predominated in non-hydrated HSFs and HHFs. In addition, a higher Fe3+/Fe2+ ratio was found in HHFs in comparison with HSFs. This study provides new understanding on iron-oxide phases that exist in hydrated ferritin proteins from different human organs. Such new insights are needed to map ferritin biomineralization pathways and possible correlations with various iron-related disorders in humans.

Highly efficient decomposition of ammonia using high-entropy alloy catalysts

Ammonia represents a promising liquid fuel for hydrogen storage, but its large-scale application is limited by the need for precious metal ruthenium (Ru) as catalyst. Here we report on highly efficient ammonia decomposition using novel high-entropy alloy (HEA) catalysts made of earth abundant elements. Quinary CoMoFeNiCu nanoparticles are synthesized in a single solid-solution phase with robust control over the Co/Mo atomic ratio, including those ratios considered to be immiscible according to the Co-Mo bimetallic phase diagram. These HEA nanoparticles demonstrate substantially enhanced catalytic activity and stability for ammonia decomposition, with improvement factors achieving >20 versus Ru catalysts. Catalytic activity of HEA nanoparticles is robustly tunable by varying the Co/Mo ratio, allowing for the optimization of surface property to maximize the reactivity under different reaction conditions. Our work highlights the great potential of HEAs for catalyzing chemical transformation and energy conversion reactions.

Alloys are important materials for catalysis but are usually limited by miscibility gaps present in their phase diagrams. Here the authors break this limitation by developing high-entropy alloy catalysts made of five earth-abundant elements and demonstrate great catalytic enhancements for ammonia decomposition.

High temperature shockwave stabilized single atoms

The stability of single-atom catalysts is critical for their practical applications. Although a high temperature can promote the bond formation between metal atoms and the substrate with an enhanced stability, it often causes atom agglomeration and is incompatible with many temperature-sensitive substrates. Here, we report using controllable high-temperature shockwaves to synthesize and stabilize single atoms at very high temperatures (1,500-2,000 K), achieved by a periodic on-off heating that features a short on state (55 ms) and a ten-times longer off state. The high temperature provides the activation energy for atom dispersion by forming thermodynamically favourable metal-defect bonds and the off-state critically ensures the overall stability, especially for the substrate. The resultant high-temperature single atoms exhibit a superior thermal stability as durable catalysts. The reported shockwave method is facile, ultrafast and universal (for example, Pt, Ru and Co single atoms, and carbon, C₃N₄ and TiO₂ substrates), which opens a general route for single-atom manufacturing that is conventionally challenging.

Ultrafast, Controllable Synthesis of Sub-Nano Metallic Clusters through Defect Engineering

Supported metallic nanoclusters (NCs, < 2 nm) are of great interests in various catalytic reactions with enhanced activities and selectivities, yet it is still challenging to efficiently and controllably synthesize ultrasmall NCs with a high-dispersal density. Here we report the in situ synthesis of surfactant-free, ultrasmall, and uniform NCs via a rapid thermal shock on defective substrates. This is achieved by using high-temperature synthesis with extremely fast kinetics while limiting the synthesis time down to milliseconds (e.g., ∼1800 K for 55 ms) to avoid aggregation. Through defect engineering and optimized loading, the particle size can be robustly tuned from >50 nm nanoparticles to <1 nm uniform NCs with a high-dispersal density. We demonstrate that the ultrasmall NCs exhibit drastically improved activities for catalytic CO oxidation as compared to their nanoparticulated counterparts. In addition, the reported method shows generality in synthesizing most metallic NCs (e.g., Pt, Ru, Ir, Ni) in an extremely facile and efficient manner. The ultrafast and controllable synthesis of uniform, high-density, and size-controllable NCs paves the way for the utilization and nanomanufacturing of NCs for a range of catalytic reactions.

Stable Multimetallic Nanoparticles for Oxygen Electrocatalysis

Nanostructured catalysts often face an important challenge: poor stability. Many factors contribute to catalytic degradation, including parasitic chemical reactions, phase separation, agglomeration, and dissolution, leading to activity loss especially during long-term catalytic reactions. This challenge is shared by a new family of catalysts, multimetallic nanoparticles, which have emerged owing to their broad tunability and high activity. While significant synthesis-based advances have been made, the stability of these nanostructured catalysts, especially during catalytic reactions, has not been well addressed. In this study, we reveal the critical influence of a synthetic method on the stability of nanostructured catalysts through aprotic oxygen catalysis (Li-O₂ battery) demonstrations. In comparison to the conventional wet impregnation (WI) method, we show that the carbothermal shock (CTS) method dramatically improves the overall structural and chemical stability of the catalyst with the same elemental compositions. For multimetallic compositions (4- and 8-elements), the overall stability of the electrocatalysts as well as the battery lifetime can be further improved by incorporating additional noncatalytically active elements into the individual nanoparticles via CTS. The results offer a new synthetic path toward the stabilization of nanostructured catalysts, where additional reaction schemes beyond oxygen electrocatalysis are foreseeable.

Real-Time TEM Study of Nanopore Evolution in Battery Materials and Their Suppression for Enhanced Cycling Performance

Battery materials, which store energy by combining mechanisms of intercalation, conversion, and alloying, provide promisingly high energy density but usually suffer from fast capacity decay due to the drastic volume change upon cycling. Particularly, the significant volume shrinkage upon mass (Li⁺, Na⁺, etc.) extraction inevitably leads to the formation of pores in materials and their final pulverization after cycling. It is necessary to explore the failure mechanism of such battery materials from the microscopic level in order to understand the evolution of porous structures. Here, prototyped Sb₂Se₃ nanowires are targeted to understand the structural failures during repetitive (de)sodiation, which exhibits mainly alloying and conversion mechanisms. The fast growing nanosized pores embedded in the nanowire during desodiation are identified to be the key factor that weakens the mechanical strength of the material and thus cause a rapid capacity decrease. To suppress the pore development, we further limit the cutoff charge voltage in a half-cell against Na below a critical value where the conversion reaction of such a material system is yet happening, the result of which demonstrates significantly improved battery performance with well-maintained structural integrity. These findings may shed some light on electrode failure investigation and rational design of advanced electrode materials with long cycling life.

In Situ Study of Molecular Structure of Water and Ice Entrapped in Graphene Nanovessels

Water is ubiquitous in natural systems, ranging from the vast oceans to the nanocapillaries in the earth crust or cellular organelles. In bulk or in intimate contact with solid surfaces, water molecules arrange themselves according to their hydrogen (H) bonding, which critically affects their short- and long-range molecular structures. Formation of H-bonds among water molecules designates the energy levels of certain nonbonding molecular orbitals of water, which are quantifiable by spectroscopic techniques. While the molecular architecture of water in nanoenclosures is of particular interest to both science and industry, it requires fine spectroscopic probes with nanometer spatial resolution and sub-eV energy sensitivity. Graphene liquid cells (GLCs), which feature opposing closely spaced sheets of hydrophobic graphene, facilitate high-resolution transmission electron microscopy (TEM) and electron energy-loss spectroscopy (EELS) measurements of attoliter water volumes encapsulated tightly in the GLC nanovessels. We perform in situ TEM and EELS analysis of water encased in thin GLCs exposed to room and cryogenic temperatures to examine the nanoscale arrangement of the contained water molecules. Simultaneous quantification of GLC thickness leads to the conclusion that H-bonding strengthens under increased water confinement. The present results demonstrate the feasibility of nanoscale chemical characterization of aqueous fluids trapped in GLC nanovessels and offer insights on water molecule arrangement under high-confinement conditions.

Metal-organic framework derived 3D graphene decorated NaTi2(PO4)3 for fast Na-ion storage

NASCION-type materials featuring super ionic conductivity are of considerable interest for energy storage in sodium ion batteries. However, the issue of inherent poor electronic conductivity of these materials represents a fundamental limitation in their utilization as battery electrodes. Here, for the first time, we develop a facile strategy for the synthesis of NASICON-type NaTi2(PO4)3/reduced graphene oxide (NTP-rGO) Na-ion anode materials from three-dimensional (3D) metal-organic frameworks (MOFs). The selected MOF serves as an in situ etching template for the titanium resource, and importantly, endows the materials with structure-directing properties for the self-assembly of graphene oxide (GO) through a one-step solvothermal process. Through the subsequent carbonization, an rGO decorated NTP architecture is obtained, which offers fast electron transfer and improved Na+ ion accessibility to active sites. Benefiting from its unique structural merits, the NTP-rGO exhibits improved sodium storage properties in terms of high capacity, excellent rate performance and good cycling life. We believe that the findings of this work provide new opportunities to design high performance NASICON-type materials for energy storage.