Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study

BACKGROUND

In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations.

METHODS

From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology.

RESULTS

The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars.

CONCLUSION

This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

Micro computed tomography (Micro-CT) characterization of root and root canal morphology of mandibular first premolars: a systematic review and meta-analysis

INTRODUCTION

Mandibular first premolars are familiar with their varied root canal morphology, causing difficulties and challenges for successful endodontic procedures. This systematic review and meta-analysis aim to study the characterization of root and canal morphology of the first mandibular premolar using micro-computed tomography.

METHODOLOGY

The literature search was conducted using electronic web databases like PubMed, Scopus, ScienceDirect and Cochrane with the chosen MeSH key words and data was retrieved until May 2023. Further to perform the statistical analysis, R v 4.3.1 software with "meta", 'metafor" "metaviz" " ggplot2" package was used, and results were represented by odds ratios (OR) and the percentage of forest plots along a 95 per cent confidence interval (CI).

RESULTS

The total number of studies meeting the inclusion criteria was 13; these studies were conducted on mandibular first premolar using Micro-CT; the total sample size was 1817. To scan the sample, an X-ray micro-focus CT system (Siemens Inveon CT, Erlangen, Germany) was used in four studies and seven different machines were used in the respective studies. Mimics 10.01 software (Materialize, Leuven, Belgium) and NRecon v.1.6.9 software (Bruker, Kontich, Belgium) were commonly operated. The minimum and maximum voxel size ranges between 11.94 and 50 μm. Vertucci's classification was frequently used (9), while one study applied Ahmed et al. and Vertucci's classification.

CONCLUSION

This systematic review provides essential information about the root and canal configurations, radicular grooves, accessory canals, and apical foramina through Micro-CT, aiming to improve the accuracy of endodontic treatment and help practitioners.

Bibliometric analysis: Root and root canal morphology using cone-beam computed tomography

OBJECTIVES

This bibliometric analysis aimed to evaluate the leading nations, authors, journals, institutes, highly cited publications, and most commonly used keywords concerning scientific publications based on root and root canal morphology using the CBCT.

MATERIAL AND METHODS

For this bibliometric analysis, an extensive search was carried out on September 25, 2023 using the Scopus database. Pertinent articles in the field were scrutinized after applying inclusion and exclusion criteria. Data were evaluated using Vosviewer and Microsoft Excel.

RESULTS

A literature search revealed the initiation of scientific publication in 2008. Significant contributions made by Saudi Arabia, India, and China concerning the number of publications were seen. Similarly, Jazan University from SA was recognized as the leading institute. The Journal of Endodontics was the leading journal, while authors JNR Martins and G Gambarini produced the highest number of papers.

CONCLUSIONS

This bibliometric analysis demonstrated that scientific publications have increased tremendously since 2008. Significant contributions have been made by developing and developed nations. The Journal of Endodontics and Jazan University have been identified as the leading journal and institute.

Correction: Evaluation of push-out bond strength, dentinal tubule penetration and adhesive pattern of bio-ceramic and epoxy resin-based root canal sealers

[This corrects the article DOI: 10.1371/journal.pone.0294076.].

Evaluation of push-out bond strength, dentinal tubule penetration and adhesive pattern of bio-ceramic and epoxy resin-based root canal sealers

INTRODUCTION

Root canal sealing materials play a crucial role in an endodontic procedure by forming a bond between the dentinal walls and the gutta-percha. The current study aims to analyse the dentinal tubule penetration and adhesive pattern, including the push-out bond strength of six commercially available root canal sealers.

METHODOLOGY

Eighty-four mandibular first premolars were split into seven groups (and n = 12), Group 1: Dia-Root, Group 2: One-Fil, Group 3: BioRoot RCS, Group 4: AH Plus, Group 5: CeraSeal, Group 6: iRoot SP, Group 7: GP without sealer (control). Two groups were made, one for dentinal tubule penetration and the other for push-out bond strength; the total sample size was one hundred sixty-eight. Root canal treatment was performed using a method called the crown down technique, and for obturation, the single cone technique was used. A confocal laser scanning microscope (Leica, Microsystem Heidel GmbH, Version 2.00 build 0585, Germany) was used to evaluate dentinal tubule penetration, and Universal Testing Machine was utilised to measure the push-out bond strength (Shimadzu, Japan) using a plunger size of 0.4 mm and speed of 1mm/min. Finally, the adhesive pattern of the sealers was analysed by HIROX digital microscope (KH-7700). Statistical analysis was carried out by a one-way Anova test, Dunnet's T3 test, and Chi-square test.

RESULTS

Highest dentinal tubule penetration was noticed with One-Fil (p<0.05), followed by iRoot SP, CeraSeal, AH Plus, Dia-Root also, the most negligible value was recorded for BioRoot RCS. Meanwhile, BioRoot RCS (p<0.05) demonstrated the greater value of mean push-out bond strength, followed by One-fil, iRoot SP, CeraSeal, AH Plus and Dia-Root. Regarding adhesive pattern, most of the samples were classified as type 3 and type 4 which implies greater sealing ability and better adherence to the dentinal wall. However, BioRoot RCS revealed the most type 4 (p<0.05), followed by AH Plus, One-Fil, CeraSeal and Dia-Root.

CONCLUSION

The highest dentinal tubule penetration was shown by One-Fil compared to other groups. Meanwhile, BioRoot RCS had greater push-out bond strength and more adhesive pattern than other tested materials.

Evaluation of root and canal morphology of mandibular premolar amongst Saudi subpopulation using the new system of classification: a CBCT study

BACKGROUND

The clinician should have complete knowledge of the normal anatomy of the root as well as complexities in the root canal configuration for a better outcome, as missed or improper handling of the canal system can lead to the failure of an entire endodontic procedure. The present study aims to assess the morphology of roots and canals in permanent mandibular premolars in the Saudi subpopulation with a new classification system.

METHODS

The present study includes 1230 mandibular premolars (645 first premolars and 585-second premolars) from 500 CBCT images of the patients, including retrospective data. iCAT scanner system (Imaging Sciences International, Hatfield, PA, USA) was used to obtain the images; scanning of 8 × 8 cm images was performed at 120 KVp and 5-7 mA with a voxel size of 0.2 mm. The new method of classification presented by Ahmed et al. 2017 was used to record and classify the root canal morphology, followed by recording the differences regarding the age and gender of the patients. Comparison of canal morphology in lower permanent premolars and its association with gender and age of the patients was done by Chi-square test/ Fisher exact test; the significance level was set at 5% (p ≤ 0.05).

RESULTS

The left mandibular 1st and 2nd premolars with one root were 47.31%, with two roots were 2.19%. However, three roots (0.24%) and C-shaped canals (0.24%) were reported only in the left mandibular 2nd premolar. The right mandibular 1st and 2nd premolars with one root were 47.56%, with two roots were 2.03%. The overall percentage of the number of roots and canals in the first and second premolars ¹ PM ¹ (88.38%), ² PM ¹ B ¹ L ¹ (3.5%), ² PM B ¹ L ¹ (0.65%), ¹ PM ^1-2-1 (3.08%), ¹ PM ^1-2 (3.17%), ¹ PM ^1-2-1-2 (0.24%), ³ PMMB ¹ DB ¹ L¹ (0.48%). However, the C-shaped canals (0.40%) were reported in right and left mandibular second premolars. No statistically significant difference was reported between mandibular premolars and gender. A statistically significant difference was reported between mandibular premolars and the age of the study subjects.

CONCLUSION

Type I (¹ TN ¹) was the major root canal configuration in permanent mandibular premolars, which was higher among males. The CBCT imaging provides thorough details about the root canal morphology of lower premolars. These findings could support diagnosis, decision-making, and root canal treatment, for dental professionals.

Application of two systems to classify the root and canal morphology in the human dentition: A national survey in India

PURPOSE

To assess the application and accuracy of two systems (Vertucci et al. 1974 and Ahmed et al. 2017) in classifying the root and canal morphology of human dentition among final-year undergraduates, interns, and postgraduate dental students in India.

METHODS

The survey was conducted using physical and online presentation modes in two phases. Phase 1; PowerPoint presentation (PPT), describing the most used classification system (Vertucci et al. 1974) and its supplementary types and Ahmed et al. (2017) classification. A single presenter delivered the PPT to participants, using either a projector in an auditorium/seminar hall (face-to-face) or an online platform (zoom meeting software). Phase 2 involved determining the students' responses. A questionnaire was distributed amongst the participants after the lecture and collected for analysis. Fisher's exact test was used to analyze the data statistically, and the significance level was set at 0.05 (p < 0.05).

RESULTS

A total of 1082 participants were involved in this survey. Overall, 93% of study participants found that Ahmed et al. classification system was more practical and accurate than Vertucci et al. system and its supplemental configurations (p < 0.001). About 97% agreed that Ahmed et al. classification system aided in understanding root and canal morphology better than Vertucci's and its additional configurations, and they recommended to include in their curriculum (p < 0.001).

CONCLUSIONS

In comparison to Vertucci's classification system and supplementary types, the undergraduate and postgraduate dental students, and interns in India agreed that Ahmed et al. classification system is more practical and accurate for classifying the root and canal morphology.

Identifying relevant topics and their competency levels for dental materials science: a fuzzy Delphi study

BACKGROUND

Dental materials science is an important core course in undergraduate dental programs which integrates foundational concepts of chemical engineering and materials science into clinical dentistry. The present study aimed to identify relevant dental materials science topics for Malaysian undergraduate dental curricula and to determine their appropriate competency levels in terms of cognitive and psychomotor taxonomies.

METHODS

Potential dental materials science topics were drafted in alignment with the revised national competency statement. The list of topics was further amended after comparing it with those recommended topics in the literature. Fuzzy Delphi method was applied. Experts were selected based on the different inclusion criteria. They ranked the topics using a five-point Likert scale and recommended the appropriate cognitive and psychomotor levels. Next, fuzzy evaluation was performed. Consensus was deemed for a topic to be included if (a) the average expert agreement was ≥ 75%, (b) the d-construct threshold value for each topic was ≤ 0.2 and (c) the average fuzzy number was ≥ 0.5.

RESULTS

Sixty-two experts participated in the study. They accepted 33 out of 36 potential dental materials science topics. The average Likert score and fuzzy number ranged from 3.63 to 4.92 and 0.526 to 0.784, respectively. Furthermore, "Endodontic materials" was ranked as the most significant topic. Meanwhile, many topics required dental students to demonstrate a cognitive level of "Apply" and a psychomotor level of "Guided response". Based on mean scores, "Impression materials" was rated as the most cognitively demanding topic, whilst "Temporary restorative materials" was the most demanding topic for psychomotor taxonomy.

CONCLUSION

The present study has identified relevant dental materials science topics and their appropriate cognitive and psychomotor levels using the Fuzzy Delphi approach. The findings of the present study form the basis for future studies to develop measurable learning outcomes, design corresponding innovative pedagogy and propose assessment criteria for each topic.

Dislodgment Resistance, Adhesive Pattern, and Dentinal Tubule Penetration of a Novel Experimental Algin Biopolymer-Incorporated Bioceramic-Based Root Canal Sealer

The currently available bioceramic-based sealers still demonstrate low bond strength with a poor seal in root canal despite desirable biological properties. Hence, the present study aimed to determine the dislodgment resistance, adhesive pattern, and dentinal tubule penetration of a novel experimental algin-incorporated bioactive glass 58S calcium silicate-based (Bio-G) sealer and compared it with commercialised bioceramic-based sealers. A total of 112 lower premolars were instrumented to size 30. Four groups (n = 16) were assigned for the dislodgment resistance test: control, gutta-percha + Bio-G, gutta-percha + BioRoot RCS, and gutta-percha + iRoot SP, with exclusion of the control group in adhesive pattern and dentinal tubule penetration tests. Obturation was done, and teeth were placed in an incubator to allow sealer setting. For the dentinal tubule penetration test, sealers were mixed with 0.1% of rhodamine B dye. Subsequently, teeth were cut into a 1 mm-thick cross section at 5 mm and 10 mm levels from the root apex, respectively. Push-out bond strength, adhesive pattern, and dentinal tubule penetration tests were performed. Bio-G showed the highest mean push-out bond strength (p < 0.05), while iRoot SP showed the greatest sealer penetration (p < 0.05). Bio-G demonstrated more favourable adhesive patterns. No significant association was noted between dislodgment resistance and dentinal tubule penetration (p > 0.05).

Fabrication and characterisation of novel algin incorporated bioactive-glass 58S calcium-silicate-based root canal sealer

Background/purpose

The usage of bioceramic-based root canal sealers has escalated over the years due to their excellent properties. The present study aimed to fabricate a novel algin incorporated bioactive glass 58S calcium-silicate (Bio-G) sealer and characterise its surface microstructure and chemical compositions in comparison to commercially available bioceramic sealers (BioRoot RCS and iRoot SP).

Materials and methods

The powder form of experimental Bio-G sealer consisted of synthesised BG 58S particle, calcium silicate, zirconia dioxide, calcium carbonate and alginic acid powder as binder. The liquid composed of 5% calcium chloride solution. Five standardised disc specimens were prepared for each sealer group according to the manufacturer's instructions. Subsequently, sealer disc-specimens were placed in an incubator at 37 °C, 95% relative humidity for 72 h to allow setting prior to testing under scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Fourier transformed infrared spectroscopy (FTIR) and X-ray diffraction (XRD).

Results

Experimental Bio-G sealer revealed irregular micro-sized particles ranging from 0.5 μm to 105 μm aggregated in clusters comparable to those of BioRoot RCS and iRoot SP. EDS microanalysis showed that Bio-G had high content of oxygen, silicon, and calcium, with the presence of aluminium and chloride similar to BioRoot RCS. Meanwhile, the FTIR and XRD findings suggested that all sealers predominantly contained calcium silicate hydrate, calcium carbonate, and zirconium dioxide, while calcium aluminium silicate oxide was detected in Bio-G.

Conclusion

The present novel Bio-G sealer demonstrated desirable particle size distribution and acceptable degree of purity. Future studies are warranted to explore its properties and clinical application.

Color variations during digital imaging of facial prostheses subjected to unfiltered ambient light and image calibration techniques within dental clinics: An in vitro analysis

Background

The study aimed to evaluate 1) the amount of color variations presents within clinical images of maxillofacial prosthetic silicone specimens when photographed under different clinically relevant ambient lighting conditions, and 2) whether white balance calibration (WBC) methods were able to mitigate variations in ambient lighting.

Methods

432 measurements were acquired from standardized images of the pigmented prosthetic silicone specimens within different ambient lighting conditions (i.e., 2 windowed and 2 windowless clinics) at noon with no light modifying apparatus. The specimens were photographed once without any white balance calibration (raw), then independently alongside an 18% neutral gray card and Macbeth color chart for calibration in a post-processing (PPWBC) software, and once after camera calibration (CWBC) using a gray card. The LAB color values were extracted from the images and color variations (ΔE) were calculated after referring to the corresponding spectrophotometric values as control.

Results

Images in windowless and windowed clinics exhibited highly significant differences (p < 0.001) with spectrophotometer (control). CWBC demonstrated no significant differences (p > 0.05) in LAB values across windowed clinics. PPWBC using Macbeth color chart produced no significant differences for a* values (p > 0.05) across all clinics while PPWBC by gray card showed no significant differences (p > 0.05) in LAB values when only similar clinics (either windowed or windowless) were compared.

Conclusion

Significant color variations were present for maxillofacial prosthetic specimens owing to natural ambient light. CWBC and PPWBC using color charts were more suitable for color correction across windowed clinics while CWBC and PPWBC using gray cards had better outcomes across windowless setups.

An Insight into the Role of Marine Biopolymer Alginate in Endodontics: A Review

Alginate is a natural marine biopolymer that has been widely used in biomedical applications, but research on its use as an endodontic material is still sparse in the literature. This pioneer review aims to summarize the emerging roles of alginate and to outline its prospective applications as a core biomaterial in endodontics. Ten electronic databases and five textbooks were used to perform a search of English-language literature on the use of alginate in endodontics published between January 1980 and June 2022. The risk of bias (RoB) of each included study was assessed using the Office of Health Assessment and Translation (OHAT) tool. Subsequently, studies were categorized into three tiers to represent the overall risk. Qualitative analysis was performed, and the articles were sorted into different thematic categories. An initial search yielded a total of 1491 articles, but only 13 articles were chosen. For most domains, all the studies were rated with ‘probably low’ or ‘definitely low’ RoB, except for domains 2 and 6. All included studies fall in the Tier 1 category and were either in vitro, in vivo, or ex vivo. Four thematic categories were identified: endodontic regeneration, intracanal medicament, filing material, and chelating agent. Based on the available evidence, alginate has emerged as a cell carrier and scaffold in regenerative endodontics, a microcapsule delivery system for intracanal medicaments, a chelating agent reinforcing material, and a root canal sealer. More well-designed experiments and clinical trials are needed to warrant the promising advent of this hydrogel-based biomaterial.

The Antimicrobial Efficacy Against Selective Oral Microbes, Antioxidant Activity and Preliminary Phytochemical Screening of Zingiber officinale

Introduction

Ginger (Zingiber officinale) has been one of the most commonly consumed herbal medicines for a long time to treat several common diseases. Antibacterial activity, antioxidant properties and many bioactive compounds in ginger have been identified previously, which could be used as an alternative method to treat many infectious diseases.

Methods

The current study evaluates ginger’s biochemical profile using qualitative and quantitative analysis and its bioactive potentials using antioxidant and antimicrobial assays against Streptococcus mutans and selective oral microbes. HPLC analysis was performed for the quantitative analysis. DPPH and disc diffusion assays were used for antioxidant and antimicrobial activities. The antimicrobial activity was checked against Streptococcus mutans, Enterococcus faecalis, Staphylococcus spp., and Lactobacillus spp. All solvents were removed by rotary evaporation before testing the dried extracts.

Results

The observed IC₅₀ value showed that distilled water extract exhibited the highest antioxidant activity (43.9), followed by ethanol extract (52.4), and the lowest activity was observed in n-butanol extract (91.2) and n-hexane (90.6). Different plant extracts have shown significant antibacterial activity (p = 0.001) against each bacterium. The highest antibacterial activity against tested bacteria was observed in n-hexane, chloroform and ethanol extracts. In comparison, the ethyl acetate, n-butanol and water extracts showed low antibacterial activity.

Conclusion

This study emphasizes that Zingiber officinale (Z. officinale) against Gram-positive bacteria is an effective antimicrobial herb. Furthermore, it can be used as a potential natural source of antioxidants. Further studies on the toxicity analysis of ginger are recommended.

Evaluation of root canal morphology in permanent maxillary and mandibular anterior teeth in Saudi subpopulation using two classification systems: a CBCT study

BACKGROUND

Adequate knowledge of root canal morphology and possible variations is essential to achieve perfect root canal treatment and overcome treatment failure. Appropriate knowledge on root and canal morphology, communication, and documentation amongst dentists will be challenging from a diagnostic and successful treatment point of view.

METHODS

A total of 3420 samples were included in this study from 285 cone-beam computed tomography images of the Saudi residents, including 171 males and 114 females aged 15 to 68 years from retrospective data dated from January 2018 to April 2021. The images were examined in sagittal, axial and coronal views using a 3D version software 1.0.10.6388. The number of canal and canal morphology was recorded using Vertucci and the new classification system. The SPSS 26 was used to conduct the statistical analysis as descriptive statistics such as mean; standard deviation and frequency were calculated. The Chi-square test analysed the data with the significance level set at 0.05.

RESULTS

A total of 285 subjects participated in the study. Majority of the participants were Saudi nationals (80.7%), followed by Indian (7.4%), Pakistani (4.2%) and other nationalities. According to Vertucci and the new classification system, Type I and ¹TN¹ were the most common types, followed by Type III and Type IV, and then ¹TN^1-2-1 and ¹TN^1-2 in mandibular anteriors. The prevalence of canal variations in mandibular canine was higher in females than in males (P = 0.002). Maxillary laterals and mandibular anteriors showed the significant difference in the prevalence of root canal variation in relation to the ethnicity (P = 0.001) and age of the patients. Younger patients showed more variations than the older patients (P = 0.012, P = 0.023, P = 0.001, P = 0.001) in terms of maxillary laterals, mandibular central, laterals and canines, respectively.

CONCLUSION

Mandibular permanent anteriors showed a wide range of canal variations and canal complexity. Males and females did not demonstrate a wide range of variation in the root canal morphology except for the canines in relation to the gender of the patients.

Herbal Medications in Endodontics and Its Application-A Review of Literature

Herbal products are gaining popularity in dental and medical practice nowadays due to their biocompatibility, higher antimicrobial activity, antioxidant and anti-inflammatory properties. Herbal medicine has experienced rapid growth in recent years due to its beneficial properties, ease of availability, and lack of side effects. As pathogenic bacteria become more resistant to antibiotics and chemotherapeutic agents, researchers are becoming more interested in alternative products and treatment choices for oral diseases. As a result, natural phytochemicals separated from plants and utilized in traditional medicine are suitable substitutes for synthetic chemicals. The aim of this review article is to list and understand several herbal alternatives that are currently accessible for use as efficient endodontic medicaments. The herbal products used in endodontics have several advantages, including safety, ease of use, increased storability, low cost, and a lack of microbial tolerance. However, preclinical and clinical testing and interactions with other materials and adverse effects are required for these herbal products.

Root and Root Canal Configuration Characterization Using Microcomputed Tomography: A Systematic Review

This systematic review’s objective was to conduct a complete analysis of the literature on the root canal morphology using advanced micro-computed tomography. The electronic web databases PubMed, Scopus, and Cochrane were examined for research papers concerning the chosen keywords, evaluating the root canal morphology using Micro-CT, published up to 2021. The articles were searched using MeSH keywords and searched digitally on four specialty journal websites. DARE2 extended (Database of Attributes of Reviews of Effects) was used to assess bias risk. The information was gathered from 18 published studies that strictly met the criteria for inclusion. In the included studies, a total of 6696 samples were studied. The studies were conducted on either maxillary (n-2222) or mandibular teeth (n-3760), permanent anteriors (n-625), and Third molars (n-89). To scan samples, a Scanco Medical machine in was used in 10 studies, Bruker Micro-CT in 34, and seven other machines were utilized in the rest. Bruker Micro-CT software from Kontich, Belgium, VG-Studio Max 2.2 software from Volume Graphics, Heidelberg, Germany, was the most commonly used software. The minimum Voxel size (resolution) adopted in the included studies was 11.6 µm. However, 60 µm was the maximum. Most studies classified the root canal morphology using Vertucci’s classification system (n-16) and the four-digit system (n-6).

Novel dental composite resin derived from rice husk natural biowaste: A systematic review and recommendation for future advancement

OBJECTIVES

This review aimed to summarize contemporary evidence related to dental composite resin derived from rice husk biowaste and its potential future advancement. This review paper included the techniques for synthesis, characterization, and preparation of rice husk composite resin. Focus was also given to the flexural strength and modulus, compressive strength, wear rate, hardness, surface roughness, color stability, polymerization shrinkage, degree of conversion, and their application onto root canal treated teeth.

MATERIAL AND METHODS

A search of English peer-reviewed literature (January 1960-February 2021) was conducted from electronic databases (PubMed Central, Cochrane, LILACS, Science Direct, Web of Science, SIGLE, EMBASE, EBSCO, Medline, and Google Scholar).

RESULTS

11 articles and a book section were finally selected for qualitative analysis. Studies concluded that the physicomechanical properties and the color stability of rice husk dental composites showed comparable results to conventional dental composites. Incorporation of zirconia nanopowder into rice husk dental composite increased the compressive strength and hardness values, associated with lower shrinkage, a high degree of conversion, and improved fracture strength when applied on root canal treated teeth.

CONCLUSIONS

Due to its low cost, eco-friendliness, and acceptable clinical performances, rice husk dental composite resin can be considered as an alternative to conventional composites.

CLINICAL SIGNIFICANCE

Dental composite resin derived from rice husk silica demonstrated excellent performance, which could potentially substitute currently available composite resins. This review will give new insight to clinicians and researchers on the usage of natural biowaste mass in the field of dental restorative materials.

Association of Vital Pulp Therapy Outcomes with Tooth Type, Arch Location, Treatment Type, and Number of Surfaces Destroyed in Deciduous Teeth: A Retrospective Study

There is a paucity of information concerning vital pulp treatment outcomes in the undergraduate teaching setting. This study aimed to determine which type of deciduous molar, arch location, type of vital pulp therapy, and the number of carious surfaces involved had a better prognosis when carried out by undergraduate dental students. The method used was the review of clinical records of 590 patients with 600 deciduous molars, that visited the outpatient undergraduate dental clinics for vital pulp therapy. Statistical analysis used to determine the associations of tooth type, arch location, treatment type, and the number of carious surfaces involved in successful outcomes was logistic regression analysis with significance set at p < 0.05. According to the regression analysis model results, there was a significant association based on tooth type (p < 0.05) and arch location (p = 0.003). In addition, there was a significant association based on the type of treatment performed (p = 0.036). However, there was no significant association in success rates based on the number of carious surfaces involved (p = 0.873). In conclusion, second deciduous molars and maxillary deciduous molars had a better overall prognosis, and indirect pulp therapy was revealed to be more highly associated with successful treatment outcomes in comparison to ferric sulfate pulpotomy in our setting.

Vertical root fracture resistance and dentinal crack formation of root canal-treated teeth instrumented with different nickel-titanium rotary systems: an in-vitro study

To compare the vertical root fracture (VRF) resistance of root canal-treated teeth instrumented with four different nickel-titanium (NiTi) rotary file systems and examine the dentinal crack pattern and direction using a new classification. Eighty mature mandibular premolars were selected and decoronated, leaving 13 mm of the root. The root samples were mounted in acrylic resin and divided randomly into five groups of different NiTi file systems: Group 1-control, Group 2-T-Pro, Group 3-HyFlex CM, Group 4-TG6 and lastly Group 5-ZenFlex. Samples in Group 2 and Group 3 were instrumented up to size 25/0.04, whereas Group 4 and Group 5 were instrumented up to size 25/0.06. Obturation was performed with AH Plus sealer and gutta-percha using single cone technique. Subsequently, all samples were subjected to occlusal compressive force until they were fractured. The force (N) needed to cause root fracture was recorded. The crack patterns and directions were also inspected under magnification and classified using a new and simple classification. The highest (VRF) resistance was noted in the control group (453.15 ± 92.23 N), followed by T-Pro (387.43 ± 76.81 N), HyFlex CM (381.88 ± 52.73 N), ZenFlex (369.15 ± 89.41 N) and finally TG6 (346.05 ± 72.08 N), but there was no significant difference between T-Pro and HyFlex (P = 0.438). A significantly higher prevalence (P = 0.001) of Type 1 crack pattern was observed, especially in samples instrumented with TG6. Majority of the cracks ran buccolingually except in some samples instrumented with ZenFlex (P = 0.898). Smaller file taper increased the VRF resistance of root canal-treated teeth. Majority of the dentinal crack exhibited Type 1 pattern and ran buccolingually.

Standardized Approach in Leakage Studies: Sealing Ability of Endodontic Sealers

.

New Experimental Zirconia-Reinforced Rice Husk Nanohybrid Composite and the Outcome of Its Surface Roughness and Microhardness in Comparison with Commercialized Nanofilled and Microhybrid Composite Resins

Background:

An ideal composite resin should demonstrate smooth surface after polishing and high hardness value to provide long-term success. Thus, this study aimed to compare the surface roughness and microhardness of new experimental zirconia-reinforced rice husk nanohybrid composite (Zr-Hybrid) with commercialized nanofilled (Filtek-Z350-XT) and microhybrid composite (Zmack-Comp) resins before and after artificial ageing.

Methods:

One hundred and eighty standardized disc samples were prepared, of which ninety samples each were used for surface roughness and microhardness test, respectively. They were divided equally into: Group 1 (Filtek-Z350-XT), Group 2 (Zmack-Comp), and Group 3 (Zr-Hybrid). For surface roughness test, all samples were polished with aluminium oxide discs and further subdivided into aged and unaged subgroups, in which composite samples in aged subgroups were subjected to 2500 thermal cycles. Next, all the samples were subjected to surface roughness test using a contact stylus profilometer. As for microhardness test, all the aged and unaged samples were tested using a Vickers hardness machine with a load of 300 kgf for 10 s and viewed under a digital microscope to obtain microhardness value. Data were analyzed using two-way ANOVA followed by post hoc Tukey's honestly significant difference and paired sample t-test with significance level set at P = 0.05.

Results:

In both the aged and unaged groups, Zr-Hybrid showed statistically significantly lower surface roughness (P < 0.05) than Filtek-Z350-XT and Zmack-Comp, but no statistically significant difference was noted between Filtek-Z350-XT and Zmack-Comp (P > 0.05). A similar pattern was noted in microhardness test, whereby Zr-Hybrid showed the highest value (P < 0.05) followed by Filtek-Z350-XT and lastly Zmack-Comp. Besides, significant differences in surface roughness and microhardness were noted between the aged and unaged groups.

Conclusion:

Zr-Hybrid seems to demonstrate better surface roughness and microhardness value before and after artificial ageing.

Is there a justification of conducting clinical audit in the endodontic treatment outcomes?

Objective:

The aim of this study is to determine the role of clinical audit in improving endodontic treatment outcomes.

Materials and Methods:

An audit at the department of endodontics at dental specialty centre kingdom of Saudi Arabia was carried out. The audit was conducted by developing endodontics treatment and success predictors based on evidence, that can be measured for endodontic care. A total of 12 months' data was examined from the previous dental records. Ten clinical cards were which included root canal treatment were selected. The audit was carried out for a minimum of 50 teeth and a maximum of 200 teeth. The radiographs of record cards were studied and a single dentist completed the audit tool.

Results:

The vitality test was performed in 1.98% cases, intra-canal medicament was used and named in 3.96% cases, 3.96% the teeth were extracted due to endodontic failure. Further, in 6.93% of the cases that were identified had certain spaces but overall root canal filling was evaluated as satisfactory.

Conclusion:

The vitality test, type of intracanal medicament, and assessment of root canal filling were not done, but there was an overall performance of predictors for endodontic treatment.

The existence of butterfly effect and its impact on the dentinal microhardness and crack formation after root canal instrumentation

To compare the microhardness and crack formation in root dentine presented with butterfly effect in lower premolars. Sixty mature lower premolars were selected and divided into the control and experimental groups. Teeth in the experimental group were instrumented up to size 30/.04. The roots were cut horizontally into twelve parts of 1-mm-thick cross-section and were numbered accordingly. They were divided into coronal, middle, and apical root sections. Sections were then viewed under a microscope to determine the presence of butterfly effect and subsequently scored. 8 teeth from both control and experimental groups with the highest and lowest score were selected. Crack formation was inspected and classified into four different types of cracks. Microhardness test was performed using a Vickers hardness test. Higher frequency of butterfly effect was found in the apical root section and root dentine with butterfly effect were harder mesiodistally. The middle and apical root sections with butterfly effect were harder than the coronal section. No significant difference of dentine hardness between the control and experimental groups. Cracks only occurred in the experimental group and presented in buccolingual direction with a higher rate of Type 1 and Type 2 cracks. Prevalence of butterfly effect in lower premolars increased from coronal to apical with increased hardness mesiodistally. More buccolingual cracks were found in radicular dentine with butterfly effect and most of them exhibited Type 1 and Type 2 cracks. Roots of lower premolar with butterfly effect may be susceptible to a higher rate of vertical root fracture in buccolingual direction, especially after root canal treatment. Thus, special attention should be given not to overload instruments during root canal preparation.

Success rates of coronal and partial pulpotomies in mature permanent molars: a systematic review and single-arm meta-analysis

Objectives: This systematic review aimed to evaluate the clinical and radiographic outcomes of coronal and partial pulpotomies in mature permanent molars with cariously exposed vital pulp. Method and materials: The protocol of the current review was registered in the PROSPERO database (CRD 42020190785). Articles published between January 1980 and June 2020 were searched in eight different online databases and six textbooks according to PRISMA guidelines. Eleven studies were included in the analysis of 1-year success rates, whereas five studies were included in the analyses of 2-year and > 2-year success rates for coronal pulpotomy. Two studies were included in the analyses of the 1-year and 2-year success rates for partial pulpotomy. The clinical and radiographic success rates were estimated using the DerSimonian-Laird random effect method. The risks of bias were evaluated using Cochrane RoB 2, ROBINS-I, and Newcastle-Ottawa scale assessment tools. Evidence levels were determined using the Oxford Centre for Evidence-Based Medicine (OCEBM) recommendation tool. The success rates using different pulp capping medicaments and restorative materials were analyzed using meta-regression analysis. Results: The clinical and radiographic success rates of coronal pulpotomy ranged between 92.2% and 99.4%, whilst for partial pulpotomy, the success rates ranged between 78.2% and 80.6%. Different pulp capping medicaments and restorative materials showed no significant effect on the success rates of coronal pulpotomy, but the former significantly (P < .05) affected the success rates of partial pulpotomy. Conclusion: Coronal and partial pulpotomies demonstrated a high success rate in treating cariously exposed vital pulp of mature permanent molars. Further well-designed studies with longer follow-up periods are required to validate these findings.

Controversies in endodontic access cavity design: A literature review

The purpose of this article is to compare and contrast the different types of endodontic access cavity designs based on the current available evidence. Four types of access cavity designs, namely, traditional endodontic access cavity design (TEC), contracted/conservative endodontic access cavity design (CEC), ultra-conservative or ninja endodontic access cavity design (NEC) and truss endodontic access cavity design (TREC) have been suggested, and the latter three are currently in the limelight. Studies in vitro have been performed comparing the TECs, CECs, TRECs and NECs; except for the TECs, the other three types have not undergone clinical trials on patients. The choice of endodontic access cavity design affects fracture strength of the tooth, but remnants of pulpal tissue, due to ineffective instrumentation, can cause root canal treatment failure.

CPD/Clinical Relevance: Root canal treatment with new access cavity designs has been proposed. However, there is lack of evidence to support such practices. It is important to consider the potential deleterious effects of such access cavity designs rather than emphasizing the preservation of tooth structure alone.

Tooth Auto-transplantation: An Alternative Treatment

Auto-transplantation is the repositioning of an autogenously erupted, partially erupted, or unerupted tooth from one site to another in the same individual. The purpose of this case report is to describe the auto-transplantation of the mandibular third molars as an alternative means of replacing second molars requiring extraction. An orthopantomogram revealed horizontal impaction of teeth #37 and 47 and mesio-angular impaction of teeth #38 and 48. Cone beam computed tomography revealed that the roots of #37 and 47 were in close proximity to the inferior alveolar canal bilaterally. As atraumatic and complete removal of these two teeth was not possible, #38 and 48 were chosen as the donor teeth instead. The procedure was carried out under general anesthesia. Teeth #38 and 48 were extracted atraumatically; teeth #37 and 47 were pulled out by sectioning and transplant sites prepared. Teeth #38 and 48 were transplanted to the sites vacated by teeth #37 and 47, respectively. Endodontic treatment of teeth #38 and 48 was completed within 1 month following transplantation. Both clinical and radiographic outcomes were considered satisfactory at 1 year postoperatively. Bone healing was observed around the roots of teeth #38 and 48. In conclusion, although auto-transplantation is not very common in general dental practice, we believe that it offers a clinically and economically viable alternative to other complicated prosthetic and dental implant treatments.

In Vitro Cytotoxicity Evaluation of Novel Nano-Hydroxyapatite-Silica Incorporated Glass Ionomer Cement

INTRODUCTION

Glass Ionomer Cements (GIC) are among the most popular restorative materials, but their use in dentistry is limited due to their physical properties. The hardness of GIC was improved by incorporation of nano-hydroxyapatite-silica into GIC, to expand its applicability.

AIM

To evaluate the cytotoxic effects of nano-hydroxyapatite-silica incorporated glass ionomer cement (HA-SiO₂-GIC) on human Dental Pulp Stem Cells (DPSC) and compare it with conventional GIC and resin modified GIC.

MATERIALS AND METHODS

Material extracts of Fuji IX, Fuji II LC and HA-SiO₂-GIC were prepared into seven serial concentrations and applied to 96-well-plates seeded with DPSC. The 96-well-plates were incubated for 24 and 72 hours. The morphology of DPSC was observed under the inverted phase contrast microscope, and the cell viability was determined using MTT assay at both time intervals. Kruskal-Wallis test was performed for statistical analysis.

RESULTS

At maximum concentration, DPSC appeared fewer in number, but the normal spindle morphology was maintained in all groups except for Fuji II LC. At lower concentrations, DPSC appeared normal and more confluent in all groups. The cytotoxic effects of all groups were dose dependent. Fuji IX demonstrated the lowest cytotoxicity, followed by HA-SiO₂-GIC. Fuji II LC demonstrated the highest cytotoxicity. The difference was significant between all groups at 200 mg/ml concentration (p<0.05). At concentration <100 mg/ml, cytotoxicity of HA-SiO₂-GIC was comparable to that of Fuji IX and lower than that of Fuji II LC.

CONCLUSION

HA-SiO₂-GIC showed a favourable cytotoxicity response and thus holds promise as a future potential restorative material in clinical dentistry.