Coupling Single Atoms to a Nanophotonic Whispering-Gallery-Mode Resonator via Optical Guiding

We demonstrate an efficient optical guiding technique for coupling cold atoms in the near field of a planar nanophotonic circuit, and realize large atom-photon coupling to a whispering-gallery mode in a microring resonator with a single-atom cooperativity C≳8. The guiding potential is created by diffracted light on a nanophotonic waveguide that smoothly connects to a dipole trap in the far field for atom guiding with subwavelength precision. We observe atom-induced transparency for light coupled to a microring, characterize the atom-photon coupling rate, extract guided atom flux, and demonstrate on-chip photon routing by single atoms. Our demonstration promises new applications with cold atoms on a nanophotonic circuit for chiral quantum optics and quantum technologies.

The influence of climate change on the allocation efficiency of new and tradition energy

The purpose of this paper is to strengthen research concerning the impact of climate change on China's water resources, in order to avoid extreme weather events such as regional rainstorms and floods affecting the stable supply of energy and electricity. The goal is to reorganize energy industry allocation to make China's energy the most efficient, which would thus help achieve sustainable development goals. The biggest contribution and of this paper is not only to enlarge the scale and take into account the sustainable aspects, but also to consider climate change factors that have been ignored in the past as exogenous variables. For the first time, we take stock of the optimal allocation of new and tradition energy sources and carbon dioxide. This study uses the Dynamic ZSG-DDF model with exogenous variables and undesirable outputs to find a way to redistribute carbon dioxide, new energy, and tradition energy from different provinces on the premise of maximizing efficiency, thus achieving the goal of reducing carbon and saving the earth. The research results show that the energy efficiency of tradition energy is higher than that of new energy in various provinces. At the same time, the China government must comprehensively review the quota targets of new energy, tradition energy, and carbon dioxide (CO₂) in each province as quickly as possible. Currently, the quotas of various provinces are seriously misplaced, and 26 provinces in total have great room for improvement.

Sustainability efficiency of climate change and global disasters based on greenhouse gas emissions from the parallel production sectors - A modified dynamic parallel three-stage network DEA model

This study employed dynamic three-stage network data envelopment analysis (DEA), considering parallel production in the agricultural and industrial sectors, to assess the impact of greenhouse gas emissions on the climate change and natural disaster stages. The results revealed the following: (1) The dynamic overall efficiencies of more countries are decreasing than are increasing. The seven countries with the poorest overall efficiency ranking (Myanmar, Vietnam, Thailand, Bangladesh, the Philippines, Pakistan, and India) are mostly located in Southeast Asia. (2) The number of countries that maintained low efficiency over the long term is greater than those that retained high efficiency over the long term. Myanmar, Mexico, India, the Philippines, Thailand, and Vietnam maintained efficiency scores below 0.5, whereas South Korea, Japan, China, and New Zealand maintained efficiency scores above 0.8. (3) More than one-third of countries exhibited declines in efficiency over time, and half were European countries. Less than one-third of countries maintained their efficiency, and less than one-third of countries gradually improved. (4) Approximately half of the countries' efficiency scores were lower than the global average. The efficiency scores of the industrial sector exhibited a greater room for improvement on the input factors than did those of the agricultural sector. (5) Total factor energy efficiency analysis revealed that methane emissions and CO₂ emissions have a similar level but large room for improvement across countries. Improving input factors in the production stage can ultimately mitigate inefficiencies in the climate change and natural disaster stages. There are still other important factors related to climate change, such as sea surface temperature, forest areas, or air pollution indicators, that could be considered in future research. The occurrence of global disasters could also be discussed in groups according to the region where the countries are located in the future.

Realization of efficient 3D tapered waveguide-to-fiber couplers on a nanophotonic circuit

We report the realization of efficiently coupled 3D tapered waveguide-to-fiber couplers (TWCs) based on standard lithography techniques. The 3D TWC design is capable of achieving highly efficient flat-cleaved fiber to silicon nitride photonic waveguide coupling, with T ≈ 95 % polarization-insensitive coupling efficiency, wide bandwidth, and good misalignment tolerance. Our fabricated 3D TWCs on a functional nanophotonic circuit achieve T ≈ 85% coupling efficiency. Beyond applications in high-efficiency photon coupling, the demonstrated 3D lithography technique provides a complementary approach for mode field shaping and effective refractive index engineering, potentially useful for general applications in integrated photonic circuits.

Energy performance of European countries by considering the role of forest

This paper applies the modified undesirable dynamic data envelopment analysis (DEA) model by considering the role of forest carbon sinks to evaluate European countries' carbon dioxide (CO₂) emissions and productivity efficiency. Taking population and energy consumption as input variables, gross domestic product (GDP) as the desirable input, CO₂ as the undesirable output, and fixed assets as an inter-temporal carry-out input variable, our results suggest considering the fixed amount of the forest carbon sinks significantly affects efficiency rankings. The overall efficiency rankings for Ireland, Austria, Italy, Germany, Spain, and Belgium look to be overrated, while those of Finland, France, and Netherlands are apparently underrated. In terms of Total-Factor Efficiency analysis, countries with the best performance in efficiency ranking are Denmark, Luxembourg, Norway, Sweden, and the UK, thanks to their long-term effort at addressing the impact of forest carbon sinks and the effect of CO₂ emissions on efficiency.

Dynamic Linkages Among Energy Consumption, Environment and Health Sustainability: Evidence from the Different Income Level Countries

Environment pollution was closely related to human health. The energy consumption is one of the important sources of environmental pollution in the development of economy. This paper used undesirable two-stage meta-frontier DDF (distance difference function) data envelopment analysis model to explore the impact of environment pollutants from energy consumption on the mortality of children and the aged, survival rate of 65 years old and health expenditure efficiency in 27 high income countries, 21 upper middle income countries, and 16 lower middle income countries from 2010 to 2014. High income countries had higher efficiency of energy and health than middle income countries in general. But whether in high income or middle income countries, the efficiency of non-renewable energy is higher than renewable energy. There was much room for both high income countries and middle income countries to improve renewable energy efficiency. Besides, middle income countries need to improve the efficiency of non-renewable energy and reduce pollutant emissions per unit of GDP. In terms of health efficiency, upper middle income countries performed worse than lower income countries. This phenomenon might indicate there was a U-shaped relationship between health efficiency and income level. Upper income countries should pay more attention to the environmental and health problems and cross the U-shaped turning point. The contribution of this article was to consider the heterogeneous performance of energy efficiency, environmental efficiency, and health efficiency under the influence of income level differences, and found that there might be a U-shaped relationship between health efficiency and income level.

Economic, Social, Medical, Work Injury, and Environmental Efficiency Assessments

Improving the management efficiency of industrial accidents is significant for stabilizing social order and improving production efficiency. Although many previous studies have discussed the impact of work injury on different occupations from the work safety and health perspectives, few have jointly discussed economic, social, medical, and environmental pollution issues, and those that do mostly employ static models, failing to take into account welfare factors and environmental pollution issues that affect society. Therefore, in order to understand the dynamic evolution trend between social and economic activities and environmental issues, this study utilizes a modified undesirable two-stage dynamic exogenous data envelopment analysis (DEA) model to explore the economic, social, medical, and environmental efficiencies of 30 provinces in China to fill the gap in the literature. In terms of work injury insurance expenditure efficiency, the results show that the air quality index (AQI) impacts the ranking of China’s 30 provincial regions, with Fujian, Ningxia, Qinghai, Shandong, Tianjin, and Xinjiang being greatly affected. AQI significantly influences overall factor efficiency, rescue invalid deaths, and the work-related injuries in the various regions. AQI also has a relatively small effect on the efficiency of work injury insurance benefits. Based on this, we offer suggestions for policy makers to evaluate the social benefits of environmental governance and the efficiency of human capital.

Air Pollution's Impact on the Economic, Social, Medical, and Industrial Injury Environments in China

In this era of rapid economic development, it is inevitable that economic activities eventually cause serious damage to the environment’s air quality, making it the focus of global public health. If the treatment efficiency of medical accidents can be improved, then this can significantly stabilize society and improve production efficiency. Past research has mainly focused on work safety and health issues, seldom discussing economic, social, medical, and environmental pollution issues together, and, most generally, adopted static methods that fail to recognize how air pollution affects the overall economy, society, medical care, and external environment. In order to more deeply understand the changes among social, economic activities, and environmental issues due to air pollution, this study proposes a meta-two-stage undesirable dynamic DDF (Direction Distance Function) that, under an exogenous model, divides the 30 provinces of China into high-income regions and middle-income regions and explores the economic, social, medical, and environmental efficiencies between the two areas to resolve the lack of related static analyses. The empirical results are as follows. (1) The AQI (air quality index) significantly impacts the efficiency of medical injuries in various regions. (2) When the AQI is considered, the medical insurance expenditure efficiency score value of high-income areas is lower than the value without the AQI. (3) When the AQI is considered, the efficiency value of the number of work injury insurance benefits in the middle-income area is lower than the efficiency value without the AQI.

The Impact of the Media and Environmental Pollution on the Economy and Health Using a Modified Meta 2-Stage EBM Malmquist Model

China's pursuit of economic growth, rapid industrialization, and urbanization over the past few decades has resulted in high energy consumption, which in turn has caused serious environmental pollution problems, such as CO₂ and PM_2.5 emissions, the long-term exposure to which can seriously affect resident health. To resolve these air pollution problems, the Chinese government has put in place several policies to reduce air and environmental pollution. Past studies on energy and environmental efficiency have been mostly static, have ignored the dynamic changes over time and regional differences, and have rarely considered human health factors. Therefore, this study employed a modified meta 2-stage Epsilon-Based Measure (EBM) Malmquist model to explore the relationships between the economy, energy, the environment, health and media, and the regional differences in 31 Chinese cities from 2014 to 2016. It was found that (1) Haikou and Lhasa's efficiencies were 1 and were the best in all 3 years, and Shijiazhuang, Jinan and Shenyang's were the most improved; (2) there was a gap between the eastern, central and western technological frontiers, with Chengdu, Hohhot, Chongqing, and Nanchang having technological gap ratios below 0.70 in the western and central Chinese regions, and Haikou, Guangzhou, and Shanghai in eastern China having technological gap ratios above 0.90 in all 3 years; and (3) the variations in the health treatment stage were greater than in the production stage, indicating that technological changes and efficiency improvements in the health treatment stages in each city were not stable.

Trapping single atoms on a nanophotonic circuit with configurable tweezer lattices

Trapped atoms near nanophotonics form an exciting platform for bottom-up synthesis of strongly interacting quantum matter. The ability to induce tunable long-range atom-atom interactions with photons presents an opportunity to explore many-body physics and quantum optics. Here we implement a configurable optical tweezer array over a planar photonic circuit tailored for cold atom integration and control for trapping and high-fidelity imaging of one or more atoms in an array directly on a photonic structure. Using an optical conveyor belt formed by a moving optical lattice within a tweezer potential, we show that single atoms can be transported from a reservoir into close proximity of a photonic interface, potentially allowing for the synthesis of a defect-free atom-nanophotonic hybrid lattice. Our experimental platform can be integrated with generic planar photonic waveguides and resonators, promising a pathway towards on-chip many-body quantum optics and applications in quantum technology.

Modal analysis and efficient coupling of TE₀₁ mode in small-core THz Bragg fibers

We report a design of low-loss THz Bragg fibers with a core size on the order of wavelength that operates near the cutoff frequency of its TE01 mode. We also propose a broadband Y-type mode converter based on branched rectangular metallic waveguides to facilitate coupling between the TE01 mode of the Bragg fiber and the TEM mode in free space with 60% efficiency. Our fiber holds strong promise to facilitate beam-wave interaction in gyrotron for high-efficiency THz generation.

Accelerating effects of nonviable Staphylococcus aureus, its cell wall, and cell wall peptidoglycan

We have previously reported that local application of viable Staphylococcus aureus dramatically accelerates wound healing, but viable Staphylococcus epidermidis does not. Because the S. aureus effect occurred in the absence of infection and because the cell walls of the two bacterial species differ, we hypothesized that nonviable S. aureus, its cell wall, and its cell wall component(s) would accelerate healing. Nonviable S. aureus was prepared by chemical and physical means, and its cell wall and peptidoglycan was prepared from heat-killed cultures. In a large number of experiments, nonviable S. aureus (independent of the strain's protein A content), its cell wall, and peptidoglycan when instilled locally at the time of wounding each significantly increased the breaking strength of rat skin incisions (tested both in the fresh state and after formalin fixation). These agents also enhanced subcutaneous polyvinyl alcohol sponge reparative tissue collagen accumulation, generally by a factor of two. Histologic features of treated and control incisions were similar. In contrast, the reparative tissue of treated sponges contained more neutrophils, macrophages, capillaries, and collagen. These experimental data thus confirm our previous studies, as well as our hypothesis, and extend these observations of enhanced wound healing to specific fractions of the bacterial cell wall.

Molecular mechanisms underlying wound healing acceleration by Staphylococcus aureus peptidoglycan

Molecular mechanisms involved in wound healing acceleration by Staphylococcus aureus peptidoglycan were investigated with the use of polyvinyl alcohol sponges implanted under the dorsal skin of rats. Total collagen and RNA content and messenger RNA levels of alpha1(I) and alpha1(III) procollagen, transforming growth factor-beta1, and matrix metalloproteinase-1 were analyzed in saline solution- and S. aureus peptidoglycan-inoculated sponges at 4, 7, 14, and 21 days after implantation. S. aureus peptidoglycan-inoculated sponges on the fourth and seventh post-operative day were surrounded and penetrated by a thick capsule of reparative connective tissue. They were considerably heavier and contained more collagen and total RNA than saline solution-inoculated sponges. Histologically, the S. aureus peptidoglycan-inoculated sponges early on contained a denser infiltrate of polymorphonuclear cells than saline solution-inoculated sponges, and later fibroblasts, macrophages, collagen, and newly formed blood vessels were more abundant in the S. aureus peptidoglycan sponges. Matrix metalloproteinase-1 messenger RNA expression was elevated at 4 days in both sponge types. However, although matrix metalloproteinase-1 mRNA levels decreased to undetectable levels by 14 days in saline solution-inoculated sponges, they remained elevated throughout the 21-day study period in S. aureus peptidoglycan-inoculated sponges. No other significant differences in the parameters analyzed were detected. These results suggest that S. aureus peptidoglycan induces an accelerated but normal wound healing process in which the markedly increased early deposition of connective tissue is rapidly remodeled likely because of a sustained expression of matrix metalloproteinase-1.

Efficient heating with a controlled microwave field

To uncover the intriguing non-thermal microwave effect, an experiment was conducted using an amplifier rather than an oscillator as the radiation source, which was injected into an applicator with strong electromagnetic field enhancement. The characteristics of the applicator are discussed and the enhancement of the microwave field is illustrated and explained. Thermal distribution is simulated based on the calculated microwave field profile. It was demonstrated that the proposed system heated a SiC susceptor to a temperature of 637 °C with the input power of 60 W. The reasons for such an efficient heating are discussed.

X-ray microfabrication and measurement of a terahertz mode converter

Mode converters are critical for frequency-tunable terahertz gyrotrons. This study reports the development of a broadband TE(02) mode converter centered at 0.2 THz. An octafeed sidewall coupling structure was employed and the mode purity was analyzed. The converter was built using the technique of x-ray microfabrication. The x rays irradiated on the SU-8 resist and generated a template of very high thickness of 1.295 mm. Pulse electroplating technique was used to deposit copper on the structure along the template. The parts then went through precise machining and the residual resist was removed via high-flux radical etching. A computer-aided diagnostic system was introduced to measure the performance of the converter. Results suggest that the frequency response of resistivity should be taken into consideration for the devices in terahertz region.

Comparison of photodegradative efficiencies and mechanisms of Victoria Blue R assisted by Nafion-coated and fluorinated TiO2 photocatalysts

The purposes of this research were to study the effects of two modified photocatalysts, Nafion-coated TiO(2) and fluorinated TiO(2), and photocatalytic degradation of Victoria Blue R in aqueous solution. Photocatalytic degradation of Victoria Blue R was accelerated by the modified photocatalysts. Bulk and surface characterizations of the resulting powders were carried out. Attachment of the anions to the TiO(2) surface using the Nafion-coated-TiO(2) possibly results in increased adsorption of the cationic dye, and the degradation rate is larger for the cationic dye. It was found that Victoria Blue R on the two illuminated TiO(2) surfaces underwent very different changes. To obtain a better understanding on the mechanistic details of this modified-TiO(2)-assisted photodegradation of the Victoria Blue R dye with UV irradiation, a large number of intermediates of the process were separated, identified, and characterized by a high-performance liquid chromatography-mass spectrometry technique. Several probable photodegradation pathways were proposed and discussed.

Measurement of angular distributions of Drell-Yan dimuons in p+p interactions at 800 GeV/c

We report a measurement of the angular distributions of Drell-Yan dimuons produced using an 800 GeV/c proton beam on a hydrogen target. The polar and azimuthal angular distribution parameters have been extracted over the kinematic range 4.5<m micromicro<15 GeV/c2 (excluding the Upsilon resonance region), 0<p T <4 GeV/c, and 0<x F<0.8. The p+p angular distributions are similar to those of p+d, and both data sets are compared with models which attribute the cos2varphi distribution either to the presence of the transverse-momentum-dependent Boer-Mulders structure function h1 perpendicular to 1 or to QCD effects. The data indicate the need to include QCD effects before reliable information on the Boer-Mulders function can be extracted. The validity of the Lam-Tung relation in p+p Drell-Yan data is also tested.

High-power millimeter-wave rotary joint

The rotary joint is a useful microwave component that connects a fixed part to a rotatable part. This study systematically analyzes the effect of the discontinuity on the interface of a rotary joint for several waveguide modes. Simulation results indicate that the transmission of the TE(01) mode is independent of the geometry of the joint, and thus is ideal for such application. A rotary joint consisting of two identical TE(01) mode converters, clasped each other by a bearing, is designed, fabricated, and tested. Back-to-back transmission measurements exhibit an excellent agreement to the results of computer simulations. The measured optimum transmission is 97% with a 3 dB bandwidth of 8.5 GHz, centered at 35.0 GHz. The cold measurement shows that the results are independent of the angle of rotation. In addition, a high-power experiment is conducted. The just developed rotary joint can operate up to a peak input power of 210 W with a duty of 18%. The working principle, although demonstrated in the millimeter-wave region, can be applied up to the terahertz region where the joint gap is generally critical except for the operating TE(01) mode.

Measurement of Upsilon production for p + p and p + d interactions at 800 GeV/c

We report a high statistics measurement of Upsilon production with an 800 GeV/c proton beam on hydrogen and deuterium targets. The dominance of the gluon-gluon fusion process for Upsilon production at this energy implies that the cross section ratio, sigma(p+d-->Upsilon)/2sigma(p+p-->Upsilon), is sensitive to the gluon content in the neutron relative to that in the proton. Over the kinematic region 0<x(F)<0.6, this ratio is found to be consistent with unity, in striking contrast to the behavior of the Drell-Yan cross section ratio sigma(p+d)(DY)/2sigma(p+p)(DY). This result shows that the gluon distributions in the proton and neutron are very similar. The Upsilon production cross sections are also compared with the p+d and p+Cu cross sections from earlier measurements.

Effect of microwave annealing temperatures on lead zirconate titanate thin films

Lead zirconate titanate (Pb(1.1)(Zr(0.52)Ti(0.48))O(3)) thin films of thickness 260 nm on Pt/Ti/SiO(2)/Si substrates were densified by 2.45 GHz microwave annealing. The PZT thin films were annealed at various annealing temperatures from 400 to 700 °C for 30 min. X-ray diffraction showed that the pyrochlore phase was transformed to the perovskite phase at 450 °C and the film was fully crystallized. The secondary (again pyrochlore) phase was observed in the PZT thin films, which were annealed above 550 °C. The surface morphologies were changed above 550 °C of the PZT thin films due to the secondary phase. Higher dielectric constant (ε(r)) and lower dielectric loss coercive field (E(c)) were achieved for the 450 °C film than for the other annealed films.

Measurement of angular distributions of Drell-Yan dimuons in p+d interactions at 800 GeV/c

We report a measurement of the angular distributions of Drell-Yan dimuons produced using an 800 GeV/c proton beam on a deuterium target. The muon angular distributions in the dilepton rest frame have been measured over the kinematic range 4.5<m{mu mu}<15 GeV/c{2}, 0<p{T}<4 GeV/c, and 0<x{F}<0.8. No significant cos2phi dependence is found in these proton-induced Drell-Yan data, in contrast with the situation for pion-induced Drell-Yan data. The data are compared with expectations from models which attribute the cos2phi distribution to a QCD vacuum effect or to the presence of the transverse-momentum-dependent Boer-Mulders structure function h{1}{perpendicular}. Constraints on the magnitude of the sea-quark h{1}{perpendicular} structure functions are obtained.

Staphylococcus aureus peptidoglycan ameliorates cyclophosphamide-induced impairment of wound healing

Cyclophosphamide given systemically to rats leads to impaired wound healing, characterized by decreases in the inflammatory reaction, fibroplasia, neovascularization, reparative collagen accumulation, and wound breaking strength. In contrast, the local application of Staphylococcus aureus peptidoglycan at the time of wounding increases all of these processes in normal rats. Accordingly, we hypothesized that inoculation of S. aureus peptidoglycan into wounds of cyclophosphamide-treated rats would ameliorate the otherwise impaired healing. Dorsal bilateral skin incisions and subcutaneous implantation of polyvinyl alcohol sponges (two on each side) were performed on male Sprague-Dawley rats receiving either saline or cyclophosphamide (24 mg/kg) intraperitoneally at the time of operation, on postoperative days 1, 2, 3, 4 (for rats killed on postoperative day 7), and also on day 8 (for rats killed on postoperative day 14). The incisions on one side were inoculated at the time of closure with 0.2 ml of saline solution, and the incisions on the other side with 6 mg S. aureus peptidoglycan in 0.2 ml saline solution (860 microg/cm incision). The sponges were instilled with 0.1 ml saline solution on the saline solution-instilled incision side or with S. aureus peptidoglycan 0.5 mg/sponge) in 0.1 ml saline solution on the other side. In control rats receiving saline solution intraperitoneally, incisions treated with S. aureus peptidoglycan were significantly stronger than saline solution-treated incisions by a factor of 1.8 at 1 week (p < 0.001); at 2 weeks the increase was small and not significant. Cardiac blood leukocytes and platelets fell markedly (90%) in cyclophosphamide- treated rats, and there was a decrease in wound breaking strength of their saline-treated incisions at both 7 and 14 days compared with saline solution-treated incisions of control rats. S. aureus peptidoglycan treatment of the wounds completely prevented this effect at 7 days, and partially at 14 days. Polyvinyl alcohol sponge reparative tissue hydroxyproline, 7 days after surgery, was decreased in cyclophosphamide-treated rats; this was completely prevented by S. aureus peptidoglycan treatment of the sponges. Histologically, the inflammatory response to the wounding, influx of macrophages and fibroblasts, angiogenesis, and collagen accumulation were all reduced at day 7 and 14 after surgery in the sponge reparative tissue of cyclophosphamide- treated rats; this was prevented by S. aureus peptidoglycan treatment of the sponges. In conclusion, a single local application of S. aureus peptidoglycan ameliorates cyclophosphamide-impaired wound healing.

Single local instillation of nonviable Staphylococcus aureus or its peptidoglycan ameliorates glucocorticoid-induced impaired wound healing

An excess in glucocorticoid steroids, either from endogenous or exogenous sources, has been shown to inhibit wound repair. Key to this impairment is a diminution of the inflammatory response to wounding, fibroplasia, capillary formation, reparative tissue collagen accumulation, and wound breaking strength. Because a single local application at operation of nonviable Staphylococcus aureus or its peptidoglycan increases all of these processes in normal rats, we hypothesized that nonviable S. aureus and S. aureus peptidoglycan would each ameliorate glucocorticoid-induced impaired healing. Sprague-Dawley male rats aseptically received two 7 cm paravertebral skin incisions and underwent subcutaneous implantation of polyvinyl alcohol sponges. Two glucocorticoids were used: hydrocortisone, 8 mg intramuscularly, daily beginning 1 day before operation and continuing during the postoperative period; or a single dose of a long-acting preparation of methylprednisolone, 6 or 8 mg intramuscularly, on the day before operation. Controls received intramuscular injections of saline solution at the same respective times. At the time of the operation, one incision and the polyvinyl alcohol sponges on one side of the animal were instilled with saline solution while the incision and sponges on the opposite side were instilled with nonviable S. aureus (hydrocortisone study) or S. aureus peptidoglycan (two methylprednisolone studies). The data showed that, at postoperative day 7, the single local application at wounding of nonviable S. aureus or S. aureus peptidoglycan increased wound breaking strength in the control rats by factors of 1.6 in the hydrocortisone experiment and 1.4 and 1.6 in the methylprednisolone studies. These treatments prevented (in hydrocortisone-treated rats) or mitigated (in methylprednisolone-treated rats) the glucocorticoid-induced decrease in wound breaking strength. In addition, these treatments prevented the glucocorticoid-induced decreases in the inflammatory (largely mononuclear cells) response to wounding and in the accumulation within the polyvinyl alcohol sponge of reparative tissue fibroblasts, capillaries, and collagen.

Variation in Bentgrass Susceptibility to Typhula incarnata and in Isolate Aggressiveness Under Controlled Environment Conditions

Typhula incarnata, the causal agent of gray snow mold, is an important winter pathogen of turfgrasses in the northern United States. The relative susceptibility of cultivars of three bent-grass species (creeping, colonial, and velvet bentgrass) to Typhula incarnata and the aggressiveness of 15 T. incarnata isolates obtained from infected turfgrasses on golf courses in Michigan, Minnesota, and Wisconsin were evaluated under controlled conditions. A hypersensitive type of resistance response to T. incarnata was not observed in any cultivar. Disease severity increased with higher inoculum concentration of T. incarnata. Colonization by gray snow mold gradually decreased with increasing plant age from 11 weeks after seeding in most cultivars tested, suggesting that age-related resistance was expressed over time. There were significant differences in disease severity among the three bentgrass species, particularly between tetraploid (creeping and colonial) and diploid (velvet) species, and among cultivars within each species, indicating varying levels of susceptibility to T. incarnata. All 15 isolates were pathogenic on bentgrass and were significantly different in aggressiveness, but aggressiveness was not related to geographic origin. Therefore, turfgrass breeders should be able to use one or a few virulent representative isolates of the pathogen to screen for resistance.

Rise and fall time behavior of the gyrotron backward-wave oscillator

The rise and fall time behavior of a pulsed microwave oscillator is a problem of academic interest. It is also of importance to radar and other applications because it can lead to phase and frequency jitters or even lock the entire pulse into an undesired mode. Here we present a study of the rise and fall time behavior in the gyrotron backward-wave oscillator (gyro-BWO). Single-mode simulations reveal that, during the rise and fall portions of the electron beam pulse, oscillation frequencies of the axial modes vary in such a way that their transit angles remain at the respective optimum values. Thus, axial mode competition and mode switching can readily take place in these transient stages. Time-dependent simulations demonstrate that, under both the gradual and instant turn-on conditions, the axial modes compete in a pattern governed by the characteristic asymmetry of the mode profiles. Other aspects of physics interest include the analysis and explanation of a resultant hysteresis effect between the rise and fall portions of the beam pulse. These understandings are expected to provide the basis for achieving a stable gyro-BWO operating at a single mode throughout the entire beam pulse.

Transition of absolute instability from global to local modes in a gyrotron traveling-wave amplifier

The gyrotron traveling-wave amplifier employing the distributed-loss scheme is capable of very high gain and effective in suppressing the global absolute instabilities. This study systematically characterizes the local absolute instabilities and their transitional behavior. The local absolute instabilities are analyzed using a model that incorporates the penetration of the field from the copper section into the lossy section. The axial modes were characterized from the perspective of beam-wave interaction and were found to share many characteristics with the global modes. The transition from global modes to local modes as the distributed loss increases was demonstrated. The electron transit angle in the copper section, which determines the feedback criterion, governs the survivability of an oscillation. In addition, the oscillation thresholds predicted using this model are more accurate than those obtained using a simplified model.

Aggressiveness of Typhula ishikariensis Isolates to Cultivars of Bentgrass Species (Agrostis spp.) Under Controlled Environment Conditions

Speckled snow mold, caused by Typhula ishikariensis, is one of the most important Typhula snow molds in subarctic zones of the Northern Hemisphere. Nine isolates of three T. ishikariensis varieties (var. ishikariensis, var. canadensis, and var. idahoensis) isolated from infected turfgrasses on golf course fairways throughout Wisconsin were evaluated for their aggressiveness toward nine cultivars of three bentgrass species (three creeping, three colonial, and three velvet cultivars) under controlled environmental conditions. Speckled snow mold severity increased as inoculum concentration of T. ishikariensis was increased. In general, bentgrass susceptibility increased between 9 and 11 weeks after seeding but gradually decreased thereafter, suggesting expression of age-related resistance as plants matured. Significant differences in aggressiveness were detected within and among T. ishikariensis varieties. Significant interactions between T. ishikariensis varieties or isolates and bentgrass species were detected, but there was no interaction between pathogen isolates and bentgrass cultivars. Disease severity evaluations showed significant differences among bentgrass cultivars and species in their response to T. ishikariensis. Since bentgrass species exhibit differential responses to T. ishikariensis varieties, representative isolates of each variety should be employed for screening of bentgrass germplasm for resistance to speckled snow mold.

Dynamics of mode competition in the gyrotron backward-wave oscillator

The axial modes of the gyrotron backward-wave oscillator (gyro-BWO) each exhibit a distinctive asymmetry in axial field profile. As a result, and in sharp contrast to the behavior of the familiar resonator-based gyrotron oscillator, particle simulations of the gyro-BWO reveal a radically different pattern of mode competition in which a fast-growing and well-established mode is subsequently suppressed by a later-starting mode with a more favorable field profile. This is verified in a Ka-band experiment and the interaction dynamics are elucidated with a time-frequency analysis.

Absolute instabilities in a high-order-mode gyrotron traveling-wave amplifier

The absolute instability is a subject of considerable physics interest as well as a major source of self-oscillations in the gyrotron traveling-wave amplifier (gyro-TWT). We present a theoretical study of the absolute instabilities in a TE01 mode, fundamental cyclotron harmonic gyro-TWT with distributed wall losses. In this high-order-mode circuit, absolute instabilities arise in a variety of ways, including overdrive of the operating mode, fundamental cyclotron harmonic interactions with lower-order modes, and second cyclotron harmonic interaction with a higher-order mode. The distributed losses, on the other hand, provide an effective means for their stabilization. The combined configuration thus allows a rich display of absolute instability behavior together with the demonstration of its control. We begin with a study of the field profiles of absolute instabilities, which exhibit a range of characteristics depending in large measure upon the sign and magnitude of the synchronous value of the propagation constant. These profiles in turn explain the sensitivity of oscillation thresholds to the beam and circuit parameters. A general recipe for oscillation stabilization has resulted from these studies and its significance to the current TE01 -mode, 94-GHz gyro-TWT experiment at UC Davis is discussed.

J/psi polarization in 800-GeV p-Cu interactions

We present measurements of the polarization of the J/psi produced in 800-GeV proton interactions with a copper target. Polarization of the J/psi is sensitive to the ccmacr; production and hadronization processes. A longitudinal polarization is observed at large x(F), while at small x(F) the state is produced essentially unpolarized or slightly transversely polarized. No significant variation of the polarization is observed versus p(T).

Linear and time-dependent behavior of the gyrotron backward-wave oscillator

Formation of axial modes in the gyrotron backward-wave oscillator is examined in the perspective of optimum conditions for beam-wave interactions. Distinctive linear properties are revealed and interpreted physically. Nonlinear implications of these properties (specifically, the role of high-order axial modes) are investigated with time-dependent simulations. Nonstationary oscillations exhibit self-modulation behavior while displaying no evidence of axial mode competition. Reasons for the erratic frequency tuning are investigated and stable tuning regimes are identified as a remedy.

Visualization of new virus-like-particles in Trichomonas vaginalis

In the present work, we demonstrate virus-like particles (VLPs) with various morphological variations in Trichomonas vaginalis. The VLPs were distinct based on size, shape and electron density, with VLPs being either electron-dense or electron-lucent. We used electron microscopy thin sections of several T. vaginalis strains virus-infected, and also negative staining of fractions obtained after purification by CsCl buoyant density gradient centrifugation. The particles observed in fractions are identical to those previously described, but by thin sections, we found new forms. The shapes found were icosahedral, spherical and oblong, and the sizes varied from 33 to 120nm in diameter with the most common VLP being spherical and having a size range from 83 to 104nm. The VLPs were found in the cytoplasm closely associated with the Golgi complex, with some VLPs budding from the Golgi, and other VLPs were detected adjacent to the plasma membrane. Unidentified cytoplasmic inclusions were observed in the region close to the VLPs and Golgi. Clusters of the already described icosahedral virus were also observed in the cytoplasm, although less frequently. These results indicate that T. vaginalis organisms may be infected with different dsRNA viruses simultaneously.

Characterization of stationary and nonstationary behavior in gyrotron oscillators

The transition from the stationary state to a sequence of nonstationary states in the gyromonotron oscillator is experimentally characterized for the first time. We have also demonstrated the stationary operation of a gyrotron backward-wave oscillator at a beam current far in excess of the generally predicted nonstationary threshold. This difference in nonlinear behavior has been investigated and shown to be fundamental with a comparative analysis of the feedback mechanisms, energy deposition profiles, and field shaping processes involved in these two types of oscillations.

Primary tumour volume delineation in nasopharyngeal carcinoma and correlation with 1997 AJCC tumour stage classification

OBJECTIVE

To investigate the variability in primary tumour volume in nasopharyngeal carcinoma and compare it with the tumour staging of the 1997 American Joint Committee on Cancer.

DESIGN

Prospective study.

SETTING

Tertiary care centre.

METHOD

A series of 33 newly diagnosed patients who were treated with high-dose radiotherapy participated in the study.

MAIN OUTCOME MEASURES

Using computed tomographic scans, primary tumour volumes were measured using the summation-of-areas technique, and the variability in tumour volume was determined. The Mann-Whitney test was used for statistical analysis.

RESULTS

A large variation in primary tumour volume was observed, especially in advanced-stage cases.

CONCLUSIONS

Nasopharyngeal carcinoma shows considerable variability in primary tumour volume. Incorporation of primary tumour volume may lead to further refinement of the 1997 tumour staging system.

Does a reduction in family medicine clerkship time affect educational outcomes?

BACKGROUND AND OBJECTIVES

Little is known about the relationship between the length of a family medicine clerkship and its educational outcomes. After our family medicine clerkship time decreased from 6 weeks to 4 weeks in July 1997, we studied how this change in clerkship length affected educational outcomes.

METHODS

Educational outcomes for the 2-year periods before and after the change were examined and compared whenever possible. Outcome measurements included student ratings of different aspects of the clerkship and student performance on clerkship examinations.

RESULTS

Students' exposure to common clinical problems was unaffected by the change. For the 4-week clerkship, there was a slight increase in student ratings of the adequacy of number of patients seen, the opportunity to follow-up with patients, the ability to develop health promotion plans, and overall satisfaction. Because the combinations of examinations used differed each year, student performance on clerkship examinations could not be directly compared.

CONCLUSIONS

Educational outcomes of the 4-week clerkship were similar to the 6-week clerkship. A few key outcomes improved. Various curricular and structural changes instituted for the 4-week clerkship contributed to the stability in outcomes. Reports from other medical schools may give additional insight into understanding this relationship.

Observation of polarization in bottomonium production at square root of s = 38.8 GeV

We present a measurement of the polarization observed for bottomonium states produced in p-Cu collisions at square root of s = 38.8 GeV. The angular distribution of the decay dimuons of the Upsilon(1S) state shows no polarization at small values of the fractional longitudinal momentum x(F) and transverse momentum p(T) but significant positive transverse production polarization for either p(T)>1.8 GeV/c or for x(F)>0.35. The Upsilon(2S+3S) (unresolved) states show a large transverse production polarization at all values of x(F) and p(T) measured. These observations challenge NRQCD calculations of the polarization expected in the hadronic production of bottomonium states.

Specific alterations of U1-C protein or U1 small nuclear RNA can eliminate the requirement of Prp28p, an essential DEAD box splicing factor

While some members of the ubiquitous DExD/H box family of proteins have RNA helicase activity in vitro, their roles in vivo remain virtually unknown. Here, we show that the function of an otherwise essential DEAD box protein, Prp28p, can be bypassed by mutations that alter either the protein U1-C or the U1 small nuclear RNA. Further analysis suggests that the conserved L13 residue in the U1-C protein makes specific contact to stabilize the U1 snRNA/5' splice site duplex in the prespliceosome, and that Prp28p functions to counteract the stabilizing effect of the U1-C protein, thereby promoting the dissociation of the U1 small nuclear ribonucleoprotein particle from the 5' splice site. Thus, in addition to unwinding RNA, the DExD/H box proteins may affect RNA-RNA rearrangements by antagonizing specific RNA-stabilizing proteins.

Modular long-range regulation of Myf5 reveals unexpected heterogeneity between skeletal muscles in the mouse embryo

The myogenic factor Myf5 plays a key role in muscle cell determination, in response to signalling cascades that lead to the specification of muscle progenitor cells. We have adopted a YAC transgenic approach to identify regulatory sequences that direct the complex spatiotemporal expression of this gene during myogenesis in the mouse embryo. Important regulatory regions with distinct properties are distributed over 96 kb upstream of the Myf5 gene. The proximal 23 kb region directs early expression in the branchial arches, epaxial dermomyotome and in a central part of the myotome, the epaxial intercalated domain. Robust expression at most sites in the embryo where skeletal muscle forms depends on an enhancer-like sequence located between −58 and −48 kb from the Myf5 gene. This element is active in the epaxial and hypaxial myotome, in limb muscles, in the hypoglossal chord and also at the sites of Myf5 transcription in prosomeres p1 and p4 of the brain. However later expression of Myf5 depends on a more distal region between −96 and −63 kb, which does not behave as an enhancer. This element is necessary for expression in head muscles but strikingly only plays a role in a subset of trunk muscles, notably the hypaxially derived ventral body muscles and also those of the diaphragm and tongue. Transgene expression in limb muscle masses is not affected by removal of the −96/-63 region. Epaxially derived muscles and some hypaxial muscles, such as the intercostals and those of the limb girdles, are also unaffected. This region therefore reveals unexpected heterogeneity between muscle masses, which may be related to different facets of myogenesis at these sites. Such regulatory heterogeneity may underlie the observed restriction of myopathies to particular muscle subgroups.

Saturated behavior of the gyrotron backward-wave oscillator

Physical processes in the gyrotron backward-wave oscillator (gyro-BWO) are investigated theoretically. Results indicate highly current-sensitive field profiles and hence sharply contrasting linear and saturated behaviors. The linear field extends over the entire structure length, whereas the saturated profile depends strongly on the energetics in the internal feedback loop. It is shown that this distinctive feature substantially influences the basic properties of the gyro-BWO including the start-oscillation current, efficiency, power scaling, and stability of tuning.

Wound healing: captopril, an angiogenesis inhibitor, and Staphylococcus aureus peptidoglycan

BACKGROUND

Captopril, an angiotensin-converting enzyme inhibitor, used for treating hypertension and heart failure, inhibits angiogenesis in the corneas of rats in response to basic fibroblast growth factor, slows the growth of experimental tumors in rats, and leads to the regression of Kaposi's sarcoma. Because angiogenesis is key to wound healing, we hypothesized that captopril would impair wound healing. We hypothesized also that because local application at operation of Staphylococcus aureus peptidoglycan (SaPG) increases angiogenesis and accelerates wound healing in rats, SaPG would prevent or ameliorate the postulated captopril-impaired wound healing.

MATERIALS AND METHODS

In each experiment, rats were divided randomly into two groups: one drinking tap water, and the other, tap water containing 0.5 mg captopril/ml. All ate chow and drank ad libitum, pre-operatively (4-12 days) and postoperatively (7 days). In experiments 1 and 2, bilateral paravertebral 5.5-cm skin incisions were made aseptically (intraperitoneal sodium pentobarbital), and closed with interrupted No. 35 stainless-steel sutures. On one side, the wound was immediately inoculated with 157 microliter pyrogen-free isotonic saline and on the other side the wound was inoculated with 157 microliter saline containing 4.7 mg SaPG (860 microgram SaPG/cm incision). In the third experiment, polyvinyl alcohol (PVA) sponges (16-17 mg dry wt each) containing either 50 microliter saline or 0.5 mg SaPG in 50 microliter saline were implanted subcutaneously, two on each side, via 1-cm incisions closed with a single suture. In the fourth experiment, 5.5-cm bilateral skin incisions and subcutaneous implantation of PVA sponges were done as described but all sites were instilled with saline only. All rats were euthanized (CO(2) asphyxia) 7 days postoperatively.

RESULTS

Wound breaking strength (WBS) of the saline-treated incisions was significantly higher (P < 0.001) in captopril-treated rats than in controls (172 +/- 13 g vs 105 +/- 6 g) in experiment 1 and higher, but not significantly in captopril-treated rats in experiment 2 (153 +/- 8 g vs 114 +/- 6 g) (PNS). SaPG inoculation of the incisions increased WBS significantly in both control and captopril-treated rats: 187 +/- 11 g vs 105 +/- 6 g (P < 0.001) and 283 +/- 16 g vs 172 +/- 13 g (P < 0.001), respectively, in experiment 1, and 217 +/- 13 g vs 114 +/- 6 g (P < 0.0001) (controls) and 266 +/- 17 g vs 153 +/- 8 g (captopril-treated rats) (P < 0.0001) in experiment 2. In experiment 3, subcutaneous PVA saline-inoculated sponge reparative tissue hydroxyproline (OHP) content was similar in control and captopril-treated rats, and SaPG inoculation increased reparative tissue OHP significantly in both groups: 2458 +/- 218 microgram/100 mg dry sponge vs 3869 +/- 230 microgram/100 mg (P < 0.001) (controls) and 2489 +/- 166 microgram/100 mg vs 4176 +/- 418 microgram/100 mg (P < 0.001) (captopril-treated rats). Histologically, angiogenesis and reparative tissue collagen were similar in control and captopril-treated rats, in both saline-inoculated and SaPG-inoculated sponges. In experiment 4 (all incisions and subcutaneous PVA sponges were saline-inoculated), there was no significant difference in WBS between control and captopril-treated rats (107 +/- 6 g vs 96 +/- 5 g, NS). PVA sponge reparative tissue OHP was significantly higher in captopril-treated rats: 3698 +/- 170 microgram/100 mg dry sponge vs 2534 +/- 100 microgram/100 mg (P < 0.0001).

CONCLUSION

Unexpectedly, in four experiments, captopril did not inhibit WBS or PVA sponge reparative tissue angiogenesis or collagen accumulation; in fact, WBS was increased significantly in one of three experiments, and PVA sponge reparative tissue OHP was increased significantly in one of two experiments. Also, captopril did not interfere with the wound healing-accelerating effect of SaPG.

Gastroesophageal variceal bleeding caused by hepatoportal arteriovenous fistula

Hepatoportal arteriovenous fistulas are usually traumatic in origin and may result in portal hypertension and serious complications. We report a 34-year-old female with a history of abdominal trauma, who developed symptoms of tarry stools and hematemesis 5 years later. Esophageal and gastric varices with bleeding were diagnosed by upper gastrointestinal endoscopy. Abdominal ultrasonography and computerized tomography favored noncirrhotic portal hypertension. An extrahepatic hepatoportal arteriovenous fistula was demonstrated by angiography. The patient underwent surgery to correct the condition. The liver had a smooth surface and both the common hepatic and gastroduodenal arteries were ligated during surgery. The postoperative course was uneventful. The varices later disappeared.

Measurement of differences between J/psi and psi(') suppression in p-A collisions

Measurements of the suppression of the yield per nucleon of J/psi and psi(') production for 800 GeV/ c protons incident on heavy nuclear targets, relative to light nuclear targets, have been made with very broad coverage in x(F) and p(T). The observed suppression is smallest at x(F) values of 0.25 and below, and increases at larger values of x(F). It is also strongest at small p(T). Substantial differences between psi(') and J/psi production are observed for the first time in p-A collisions. The suppression for psi(') production is stronger than that for J/psi for x(F) near zero, but becomes comparable to that for J/psi for x(F)>0.6.

Induction of differentiation and apoptosis by ligands of peroxisome proliferator-activated receptor gamma in non-small cell lung cancer

The peroxisome proliferator-activated receptor gamma (PPARgamma) is a ligand-activated transcription factor belonging to the steroid receptor superfamily. It is a key regulator of adipogenic differentiation, the ligands of which have also been demonstrated to induce differentiation in human breast and colon cancer cell lines. This study examined PPARgamma, in non-small cell lung cancer (NSCLC). PPARgamma mRNA and protein were expressed in NSCLC cell lines, with highest levels in adenocarcinomas. PPARgamma protein was also expressed in 50% of primary lung cancers by immunohistochemistry. Treatment of multiple cell lines with two distinct PPARgamma ligands in the presence of serum resulted in growth arrest, irreversible loss of capacity for anchorage-independent growth, decreased activity and expression of matrix metalloproteinase 2, and modulation of multiple markers in a manner consistent with differentiation. Specifically, there was up-regulation of general markers of the differentiated state such as gelsolin, Mad, and p21. Down-regulation of specific markers of progenitor lineages for the peripheral lung, i.e., the type II pneumocyte lineage markers MUC1 and surfactant protein-A and the Clara cell lineage marker CC10, also occurred. In addition, HTI56, a marker of terminally differentiated type I pneumocytes, was also induced. Consistent with a more mature, less malignant phenotype, ligand treatment also inhibited the expression of cyclin D1 and led to hypophosphorylation of the retinoblastoma protein. In contrast, in the absence of serum, ligand treatment rapidly resulted in apoptosis and substantially earlier onset of differentiation. Taken together, these results show that depending on the growth milieu, ligands of PPARgamma induce differentiation and apoptosis in NSCLC, suggesting clinical utility for these agents.

Prediction of the rates of fertilization, cleavage, and pregnancy success by cumulus-coronal morphology in an in vitro fertilization program

OBJECTIVE

To examine the relation between the grading of cumulus-coronal morphology at oocyte retrieval and the rates of fertilization, cleavage, and pregnancy success in IVF-ET cycles.

DESIGN

Retrospective study.

SETTING

University-affiliated medical center.

PATIENT(S)

Infertile women who underwent IVF-ET treatment.

INTERVENTION(S)

None.

MAIN OUTCOME MEASURE(S)

Fertilization and cleavage of the oocytes and the pregnancy outcome.

RESULT(S)

Mature grade 3 cumulus-oocyte complexes (COCs) constituted the highest percentage among all grades and had a higher fertilization rate than COCs of other grades (77% versus 65%, 43%, and 28% for grades 2, 1, and 4, respectively). The cleavage and polyspermy rates did not correlate with cumulus-coronal morphology grading. The pregnancy rate was higher in cycles with >50% grade 3 COCs than in cycles with < or =50% grade 3 COCs (32% versus 16%). In cycles with >80% grade 3 COCs, the pregnancy rate was 57%. The correlation between the percentage of grade 3 COCs and the pregnancy rate was independent of patient age and the number of COCs retrieved.

CONCLUSION(S)

The cumulus-coronal morphology grade correlates with the fertilization rate but not with the cleavage or polyspermy rate. In vitro fertilization cycles that have a greater percentage of grade 3 COCs have an increased chance of resulting in pregnancy. The cumulus-coronal morphology grade predicts pregnancy success in IVF-ET cycles.