1
|
Tailoring ultrabroadband near-infrared luminescence in Bi-doped germanosilicate glasses. Sci Rep 2023; 13:22852. [PMID: 38129645 PMCID: PMC10739908 DOI: 10.1038/s41598-023-49898-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/23/2023] [Accepted: 12/13/2023] [Indexed: 12/23/2023] Open
Abstract
Bi-doped glasses and optical fibers are extensively studied since they present broadband optical amplification in the near-infrared region (NIR), in which the optical telecommunication industry greatly depends for the transmission of optical signals. There are many scientific challenges about the NIR luminescent emissions from Bi ions, such as understanding its origin and further improving the associated optical amplification capacity. In this work, Bi-doped germanosilicate glass compositions with ultrabroadband NIR luminescence were fabricated, in the range of 925-1630 nm, which covers O, E, S, C, and L-telecommunication bands. An in-depth analysis of the impact of modifying excitation wavelengths, Bi content, and GeO2/SiO2 concentration ratio in the glass matrix demonstrates the possibility of considerably manipulating the Bi NIR luminescence, in terms of tuning emission parameters such as bandwidth, up to ~ 490 nm, and luminescence intensity. Based on theoretical and experimental luminescence data retrieved from the fabricated glasses, we demonstrate that the origin of broadband luminescence under all the considered excitation wavelengths can be ascribed to optical transitions of Bi0 ions. Therefore, an energy level diagram for Bi0 is proposed. We anticipate that our findings can provide clarifications to the existing uncertainty in the origin of Bi NIR emission, which will be useful to fabricate efficient future optical fiber amplifiers.
Collapse
|
2
|
Towards REPO 4 nanocrystal-doped optical fibers for distributed sensing applications. Sci Rep 2023; 13:12891. [PMID: 37558741 PMCID: PMC10412647 DOI: 10.1038/s41598-023-40161-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/19/2023] [Accepted: 08/05/2023] [Indexed: 08/11/2023] Open
Abstract
Rayleigh scattering enhanced nanoparticle-doped optical fibers, for distributed sensing applications, is a new technology that offers unique advantages to optical fiber community. However, the existing fabrication technology, based on in situ grown alkaline earth nanoparticles, is restricted to few compositions and exhibit a great dependence on many experimental conditions. Moreover, there is still several uncertainties about the effect of drawing process on the nanoparticle characteristics and its influence on the scattering enhancement and the induced optical loss. In this work, we shed light on all these issues that prevent the progress in the field and demonstrate the suitability of doping optical fibers with YPO4 nanocrystals for developing tunable Rayleigh scattering enhanced nanoparticle-doped optical fibers. An exhaustive 3D microstructural study reveals that their features are closely linked to the fiber drawing process, which allow the size and shape engineering at the nanoscale. In particular, the YPO4 nanocrystals preserve their features to a large extent when the optical fibers are drawn below 1950 °C, which allows obtaining homogeneous nanocrystal features and optical performance. Fabricated fibers exhibit a tunable enhanced backscattering in the range of 15.3-54.3 dB, with respect to a SMF-28 fiber, and two-way optical losses in the range 0.3-160.7 dB/m, revealed by Optical Backscatter Reflectometry (OBR) measurements. This allows sensing lengths from 0.3 m up to more than 58 m. The present work suggests a bright future of YPO4 nanocrystals for distributed sensing field and open a new gate towards the incorporation of other rare-earth orthophosphate (REPO4) nanocrystals with pre-defined characteristics that will overcome the limitations of the current in situ grown alkaline earth-based technology.
Collapse
|
3
|
Unveiling Structural Insights into Nanocrystal-Doped Optical Fibers via Confocal Raman Microscopy. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 37482898 DOI: 10.1021/acsami.3c07512] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Subscribe] [Scholar Register] [Indexed: 07/25/2023]
Abstract
An in-depth characterization of nanoparticle-doped optical fibers is crucial to understand the potential new functionalities of the engineered glass and thus their applicability fields. The high temperatures of the manufacturing process strongly affect the nanoparticle features, and therefore, their analysis is necessary after fiber drawing. However, the difficulties associated with the use of atomic resolution microscopies to analyze the nanoparticle features in the fiber core, mainly related to sample preparation and expensive costs, usually prevent their study. In this work, we overcome some of those limitations and demonstrate, for the first time, the suitability of structurally and microstructurally studying in detail nanocrystals contained in a fiber core of ∼10 μm by combining confocal Raman microscopy, Rayleigh light-scattering microscopy, and scanning electron microscopy (SEM). A thorough study of cubic-shaped and rod-shaped YPO4 nanocrystals contained in optical fibers reveals their crystallization in tetragonal (t) and monoclinic (m) structures, respectively. The symmetric (ν1) and asymmetric stretching (ν3) Raman modes display a different and remarkable red shift as particle size decreases in both types of nanocrystals, which in the case of the cubic-shaped nanocrystals is fitted to an exponential function along with a Raman peak broadening. Moreover, their Raman dependence vs temperature is evaluated up to 600 °C, observing a phonon softening that follows a linear behavior, which is discussed in detail. These findings add new insights to pure m-YPO4, which was unknown to date, and the REPO4 family and open up new avenues that can be extrapolated to other nanostructures incorporated into optical fiber cores, which will advance progress in the field of nanoparticle-doped optical fibers.
Collapse
|
4
|
Publisher Correction: Near-infrared quantum cutting luminescence in Pr 3+/Yb 3+ doped lead bismuth borate glass. Sci Rep 2023; 13:1412. [PMID: 36697498 PMCID: PMC9876899 DOI: 10.1038/s41598-023-28611-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/26/2023] Open
|
5
|
Near-infrared quantum cutting luminescence in Pr 3+/Yb 3+ doped lead bismuth borate glass. Sci Rep 2022; 12:19311. [PMID: 36369471 PMCID: PMC9652363 DOI: 10.1038/s41598-022-23808-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2022] [Accepted: 11/06/2022] [Indexed: 11/13/2022] Open
Abstract
In this paper, thermally stable lead-bismuth-borate glasses were doped with 0.5 mol% of Pr3+ ions at several concentration levels of Yb3+ ions. Structural characterizations were performed via Raman, differential scanning calorimetry, optical absorption and fluorescence spectra. The Judd-Ofelt intensity parameter, [Formula: see text], of Pr3+ doped glass was comparatively higher than those from reported ones, which reflects the increase of co-valency and asymmetry of chemical bonds in the local environment of Pr3+. Near-infrared emission in 900-2200 nm wavelength range was recorded through 443 nm blue laser pumping. Visible to near-IR quantum cutting and concentration quenching mechanisms were discussed to understand the luminescent behaviour. Intense IR emission ([Formula: see text] features generated by absorbing one visible photon leads to quantum efficiencies close to 128% in Pr3+/Yb3+ co-doped samples which may improve the solar spectrum absorption and accordingly, increase the efficiency of c-Si solar cells. Emission cross-section, lifetime, figure of merit and gain bandwidth corresponding to Pr3+: [Formula: see text] ([Formula: see text]m) were comparatively reported suggesting that the glass with molar composition 0.5Pr3+/0.1Yb3+ might be a potential candidate for [Formula: see text]m laser operation with low pump threshold.
Collapse
|
6
|
Comment on "Reversible 3D optical data storage and information encryption in photo-modulated transparent glass medium". LIGHT, SCIENCE & APPLICATIONS 2022; 11:233. [PMID: 35882829 PMCID: PMC9325791 DOI: 10.1038/s41377-022-00919-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/31/2022] [Accepted: 06/29/2022] [Indexed: 06/15/2023]
|
7
|
Nonlinear chalcogenide optical fiber couplers. OPTICS EXPRESS 2022; 30:20288-20297. [PMID: 36224778 DOI: 10.1364/oe.458767] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/20/2022] [Accepted: 05/09/2022] [Indexed: 06/16/2023]
Abstract
We demonstrate chalcogenide optical fiber couplers with a power-dependent coupling coefficient. The couplers are designed and fabricated using an As2Se3 fiber and characterized at a wavelength of 1938 nm, leading to a critical power of 126 W, the lowest ever reported for any optical fiber coupler. These nonlinear couplers enable all-optical switching and will be useful for passive mode-locking over a wide wavelength range from the telecommunication band to the mid-infrared.
Collapse
|
8
|
Optimization & Characterization of Interdigitated Electrodes for Microbial Growth Monitoring. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2021; 2021:1226-1229. [PMID: 34891508 DOI: 10.1109/embc46164.2021.9630056] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
This study optimally designed and implemented highly sensitive microscale interdigitated electrodes (IDEs) to monitor microorganisms' growth in diverse environments. Gold interdigitated electrodes (AuIDE) with 4 mm×4 mm effective sensing area and varying microscale interdigitate gaps were designed and fabricated. The electrodes were electrically characterized voltametrically. Electrochemical impedance spectroscopy (EIS) measurements were conducted to determine the optimal geometry by observing the impedance spectra of microelectrodes through varying pH and temperature. Furthermore, the sensors sensitivity was evaluated by measuring the impedance properties of a microscale volume of microorganism concentrations in growth media solution.
Collapse
|
9
|
Microscope-FTIR Spectrometry Based Sensor for Neurotransmitters Detection. IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS 2021; 15:938-948. [PMID: 34432634 DOI: 10.1109/tbcas.2021.3107805] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
In this work, we present a new sensing approach for aqueous samples based on the microscope-FTIR spectrometer and applied for neurotransmitters. Our contribution in this work consists of a new sample handling system for the microscope-FTIR spectrometer based on a total reflective mirror, a heated hydrophobic layer for solvent removal/evaporation and sample confinement and a microfluidic system that handles sample injection unlike standard sample handling system which was based only on a total reflective mirror. In addition, another part of our contribution consists of proposing a new algorithm to extract molecular composition of the solution with high estimation ratios and based on the analysis of detected peaks on IR spectra. The data acquired from the microscope-FTIR spectrometer was analyzed by a newly developed algorithm to identify each neurotransmitter in homogeneous and non-homogeneous solutions with high selectivity. We used six neurotransmitter molecules (Dopamine hydrochloride, L-Ascorbic acid, Acetylcholine chloride, y-Aminobutyric, Glycine and L-Glutamic acid). The results obtained based on the algorithm developed showed that, using the new system, the six neurotransmitters can be identified in homogeneous and mixture solutions with an estimation ratio range of 88.8%-100% for Dopamine hydrochloride, 80%-100% for L-Ascorbic acid, 75%-100% for Acetylcholine chloride, 75%-100% for L-Glutamic, 77.7%-100% for y-Aminobutyric and 75%-100% for Glycine.
Collapse
|
10
|
Structural and optical properties of Nd:YAB-nanoparticle-doped PDMS elastomers for random lasers. Sci Rep 2021; 11:16803. [PMID: 34413334 PMCID: PMC8377032 DOI: 10.1038/s41598-021-95921-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/11/2021] [Accepted: 07/26/2021] [Indexed: 11/08/2022] Open
Abstract
We report the structural and optical properties of Nd:YAB (NdxY1-x Al3(BO3)4)-nanoparticle-doped PDMS elastomer films for random lasing (RL) applications. Nanoparticles with Nd ratios of x = 0.2, 0.4, 0.6, 0.8, and 1.0 were prepared and then incorporated into the PDMS elastomer to control the optical gain density and scattering center content over a wide range. The morphology and thermal stability of the elastomer composites were studied. A systematic investigation of the lasing wavelength, threshold, and linewidth of the laser was carried out by tailoring the concentration and optical gain of the scattering centers. The minimum threshold and linewidth were found to be 0.13 mJ and 0.8 nm for x = 1 and 0.8. Furthermore, we demonstrated that the RL intensity was easily tuned by controlling the degree of mechanical stretching, with strain reaching up to 300%. A strong, repeatable lasing spectrum over ~ 50 cycles of applied strain was observed, which demonstrates the high reproducibility and robustness of the RL. In consideration for biomedical applications that require long-term RL stability, we studied the intensity fluctuation of the RL emission, and confirmed that it followed Lévy-like statistics. Our work highlights the importance of using rare-earth doped nanoparticles with polymers for RL applications.
Collapse
|
11
|
Spectroscopic investigations on Yb3+ doped and Pr3+/Yb3+ codoped tellurite glasses for photonic applications. J RARE EARTH 2021. [DOI: 10.1016/j.jre.2019.12.006] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
12
|
Co-sputtered Pr 3+-doped Ga-Ge-Sb-Se active waveguides for mid-infrared operation. OPTICS EXPRESS 2020; 28:22511-22523. [PMID: 32752511 DOI: 10.1364/oe.398434] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/22/2020] [Accepted: 06/30/2020] [Indexed: 06/11/2023]
Abstract
This work reports on the properties of luminescent waveguides based on quaternary Ga-Ge-Sb-Se amorphous thin films doped with praseodymium. The waveguides were fabricated via magnetron co-sputtering, followed by inductively coupled plasma reactive ion etching. The initial thin film thickness and optical properties were assessed and the spectroscopic properties of the waveguides were measured. The measurements show promising results-it is possible to obtain mid-infrared fluorescence at 2.5 and 4.5 µm by injecting near-infrared light at 1.5 µm as the pump beam. By comparing waveguides with various praseodymium concentrations, the optimal doping content for maximum fluorescence intensity was identified to be close to 4100 ppmw. Finally, correlation between the intensity of mid-infrared emission and the width/length of the waveguide is shown.
Collapse
|
13
|
The EcoChip 2: An Autonomous Sensor Platform for Multimodal Bio-environmental Monitoring of the Northern Habitat. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2020; 2020:4101-4104. [PMID: 33018900 DOI: 10.1109/embc44109.2020.9176335] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
This paper presents the EcoChip 2, an autonomous multimodal bio-environmental sensor platform for the monitoring of microorganisms in the northern habitat. The EcoChip 2 prototype includes an array of 96-wells for the continuous monitoring of microbiological growth through a multichannel electrochemical impedance analyzer circuit. In addition, the platform includes luminosity, humidity, temperature sensors and monitoring. The developed electronic board uses an ultra-low-power microcontroller unit, a custom power management unit, a low-power wireless ISM-2.45 GHz transceiver, and a flash memory to accumulate and store the sensor data over extended monitoring periods. When a wireless base station is placed within the transmission range of the EcoChip 2, an embedded low-power wireless transceiver transmits the 96-wells impedance data and the other sensor data stored in the flash memory to the user interface. We present the measured performance of the prototype, along with laboratory test results of bacterial growth measurements inside the 96 wells in parallel. We show that the EcoChip 2 can successfully measure the impedances associated with bacterial growth over several hours using an excitation frequency of 2 kHz with power consumption of 114.6 mW under operating mode.
Collapse
|
14
|
Multimodal Electrophysiological Signal Measurement using a New Flexible and Conductive Polymer Fiber-electrode. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2020; 2020:4373-4376. [PMID: 33018964 DOI: 10.1109/embc44109.2020.9176420] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Abstract
A new multi-material polymer fiber electrode has been developed for smart clothing applications. The conductive fiber is optimized for bipotential measurements such as surface electromyogram (sEMG) and electrocardiogram (ECG). The main benefit of this fiber is its flexibility and being a dry and non-obtrusive electrode. It can be directly integrated into a garment to make a smart textile for real time biopoten-tial monitoring. A customized wireless electronic system has been developed to acquire electrophysiological signal from the fiber. The receiver base station is connected to a PC host running Matlab. The multi-material polymer fiber electrode recording setting were first optimized in length and inter-electrode distance by recording different sEMG signals. The typical sEMG signal to noise ratio ranges from 19.1 dB to 33.9 dB depending on the geometry. These value are comparable with those obtained with Ag/AgCl electrodes and dry electrode-base commercial system such as Delsys Trigno. The frequency domain analysis obtained from the power spectral density reveals that the new flexible fiber-electrode enables high sEMG signals recording quality while being suitable for integration in smart clothing fabric. A muscle fatigue analysis and ECG recording are also presented in this study. The multi-material polymer fiber electrodes demonstrate a viable solution for sEMG and ECG data acquisition.
Collapse
|
15
|
Comparative study of Er 3+-doped Ga-Ge-Sb-S thin films fabricated by sputtering and pulsed laser deposition. Sci Rep 2020; 10:7997. [PMID: 32409661 PMCID: PMC7224381 DOI: 10.1038/s41598-020-64092-3] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/07/2020] [Accepted: 04/09/2020] [Indexed: 11/30/2022] Open
Abstract
Despite the renewed interest in rare earth-doped chalcogenide glasses lying mainly in mid-infrared applications, a few comprehensive studies so far have presented the photoluminescence of amorphous chalcogenide films from visible to mid-infrared. This work reports the fabrication of luminescent quaternary sulfide thin films using radio-frequency sputtering and pulsed laser deposition, and the characterization of their chemical composition, morphology, structure, refractive index and Er3+ photoluminescence. The study of Er3+ 4I13/2 level lifetimes enables developing suitable deposition parameters; the dependency of composition, structural and spectroscopic properties on deposition parameters provides a way to tailor the RE-doped thin film properties. The surface roughness is very low for both deposition methods, ensuring reasonable propagation optical losses. The effects of annealing on the sulfide films spectroscopy and lifetimes were assessed. PLD appears consistent composition-wise, and largely independent of the deposition conditions, but radiofrequency magnetron sputtering seems to be more versatile, as one may tailor the film properties through deposition parameters manipulation. The luminescence via rare earth-doped chalcogenide waveguiding micro-structures might find easy-to-use applications concerning telecommunications or on-chip optical sensors for which luminescent sources or amplifiers operating at different wavelengths are required.
Collapse
|
16
|
Nonlinear increase, invisibility, and sign inversion of a localized fs-laser-induced refractive index change in crystals and glasses. LIGHT, SCIENCE & APPLICATIONS 2020; 9:64. [PMID: 32351688 PMCID: PMC7171118 DOI: 10.1038/s41377-020-0298-8] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/07/2019] [Revised: 02/20/2020] [Accepted: 03/19/2020] [Indexed: 05/14/2023]
Abstract
Multiphoton absorption via ultrafast laser focusing is the only technology that allows a three-dimensional structural modification of transparent materials. However, the magnitude of the refractive index change is rather limited, preventing the technology from being a tool of choice for the manufacture of compact photonic integrated circuits. We propose to address this issue by employing a femtosecond-laser-induced electronic band-gap shift (FLIBGS), which has an exponential impact on the refractive index change for propagating wavelengths approaching the material electronic resonance, as predicted by the Kramers-Kronig relations. Supported by theoretical calculations, based on a modified Sellmeier equation, the Tauc law, and waveguide bend loss calculations, we experimentally show that several applications could take advantage of this phenomenon. First, we demonstrate waveguide bends down to a submillimeter radius, which is of great interest for higher-density integration of fs-laser-written quantum and photonic circuits. We also demonstrate that the refractive index contrast can be switched from negative to positive, allowing direct waveguide inscription in crystals. Finally, the effect of the FLIBGS can compensate for the fs-laser-induced negative refractive index change, resulting in a zero refractive index change at specific wavelengths, paving the way for new invisibility applications.
Collapse
|
17
|
Nanoparticles (NPs) of WO 3-x Compounds by Polyol Route with Enhanced Photochromic Properties. NANOMATERIALS 2019; 9:nano9111555. [PMID: 31683876 PMCID: PMC6915692 DOI: 10.3390/nano9111555] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/11/2019] [Revised: 10/25/2019] [Accepted: 10/28/2019] [Indexed: 11/16/2022]
Abstract
Tungsten trioxide (WO3) is well-known as one of the most promising chromogenic compounds. It has a drastic change of coloration induced from different external stimuli and so its applications are developed as gas sensors, electrochromic panels or photochromic sensors. This paper focuses on the photochromic properties of nanoWO3, with tunable composition (with tunable oxygen sub-stoichiometry). Three reference samples with yellow, blue and black colors were prepared from polyol synthesis followed by post annealing under air, none post-annealing treatment, or a post-annealing under argon atmosphere. These three samples differ in terms of crystallographic structure (cubic system versus monoclinic system), oxygen vacancy concentration, electronic band diagram with occurrence of free or trapped electrons and their photochromic behavior. Constituting one main finding, it is shown that the photochromic behavior is highly dependent on the compound’s composition/color. Rapid and important change of coloration under UV (ultraviolet) irradiation was evidenced especially on the blue compound, i.e., the photochromic coloring efficiency of this compound in terms of contrast between bleached and colored phase, as the kinetic aspect is high. The photochromism is reversible in a few hours. This hence opens a new window for the use of tungsten oxide as smart photochromic compounds.
Collapse
|
18
|
The EcoChip: A Wireless Multi-Sensor Platform for Comprehensive Environmental Monitoring. IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS 2018; 12:1289-1300. [PMID: 30387742 DOI: 10.1109/tbcas.2018.2878404] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
This paper presents the EcoChip, a new system based on the state-of-the-art electro-chemical impedance (EIS) technologies allowing the growth of single strain organisms isolated from northern habitats. This portable system is a complete and autonomous wireless platform designed to monitor and cultivate microorganisms directly sampled from their natural environment, particularly from harsh northern environments. Using 96-well plates, the EcoChip can be used in the field for real-time monitoring of bacterial growth. Manufactured with high-quality electronic components, this new EIS monitoring system is designed to function at a low excitation voltage signal to avoid damaging the cultured cells. The high-precision calibration network leads to high-precision results, even in the most limiting contexts. Luminosity, humidity, and temperature can also be monitored with the addition of appropriate sensors. Access to robust data storage systems and power supplies is an obvious limitation for northern research. That is why the EcoChip is equipped with a flash memory that can store data over long periods of time. To resolve the power issue, a low-power micro-controller and a power management unit control and supply all electronic building blocks. Data stored in the EcoChip's flash memory can be transmitted through a transceiver whenever a receiver is located within the functional transmission range. In this paper, we present the measured performance of the system, along with results from laboratory tests in vitro and from two field tests. The EcoChip has been utilized to collect bio-environemental data in the field from the northern soils and ecosystems of Kuujjuarapik and Puvirnituq, during two expeditions, in 2017 and 2018, respectively. We show that the EcoChip can effectively carry out EIS analyses over an excitation frequency ranging from 750 Hz to 10 kHz with an accuracy of 2.35%. The overall power consumption of the system was 140.4 mW in normal operating mode and 81 μW in sleep mode. The proper development of the isolated bacteria was confirmed through deoxyribonucleic acid sequencing, indicating that bacteria thrive in the EcoChip's culture wells while the growing conditions are successfully gathered and stored.
Collapse
|
19
|
Demonstration of an erbium-doped fiber with annular doping for low gain compression in cladding-pumped amplifiers. OPTICS EXPRESS 2018; 26:26633-26645. [PMID: 30469746 DOI: 10.1364/oe.26.026633] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/03/2018] [Accepted: 09/14/2018] [Indexed: 06/09/2023]
Abstract
We present the design and characterization of a cladding-pumped amplifier with erbium doping located in an annular region near the core. This erbium-doped fiber is proposed to reduce gain saturation, leading to smaller gain compression when compared to uniform core doping. Through numerical simulations, we first compare the performance of three fibers with different erbium doping profiles in the core or the cladding. When the doped fibers are operated at the optimum length, results show that the smaller overlap of the signal mode field with the annular erbium doping region leads to higher gain and lower saturation of the amplifier. A single-core erbium-doped fiber with an annular doping and a D-shaped cladding was fabricated. Measurements demonstrate less than 4 dB of gain compression over the C-band for input power ranging from -40 dBm to 3 dBm. Small gain compression EDFAs are of interest for applications that require input channel reconfiguration. Higher gain and saturation output power are also key issues in cladding-pumped multi-core amplifiers.
Collapse
|
20
|
Intact primate brain tissue identification using a completely fibered coherent Raman spectroscopy system. NEUROPHOTONICS 2018; 5:035005. [PMID: 30137924 PMCID: PMC6096268 DOI: 10.1117/1.nph.5.3.035005] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/19/2018] [Accepted: 05/22/2018] [Indexed: 05/03/2023]
Abstract
Coherent Raman fiber probes have not yet found their way into the clinic despite their immense potential for label-free sensing and imaging. This is mainly due to the traditional bulky laser systems required to create the high peak power laser pulses needed for coherent Raman, as well as the complications that arise from the propagation of this type of energy through silica. Specifically, a coherent anti-Stokes Raman scattering (CARS) probe that could select its integration volume at high resolution, away from the tip of the fiber, is particularly interesting in the case of electrode implantation neurosurgeries, wherein it is possible to place optical fibers on-board the chronic electrode and provide optical guidance during its implantation, through the semi-transparent tip. To this clinical end, we have created an all fiber CARS system, consisting of small, rapidly tunable, turn-key fiber-lasers, capable of creating high wavenumber CARS spectra on the order of tens-of-milliseconds. The use of traditional silica fibers is made possible by the use of the laser's long pulse-widths (25 ps). The probe itself has an outer diameter of 250 μ m allowing it to fit within commercially available metal tubes that can replace deep brain stimulation (DBS) stylets. Using this system, we identified brain tissue types in intact nonhuman primates' brains and showed the ability to delineate white and gray matters with high resolution. Its advantages over spontaneous Raman stem from the orders of magnitude improvement in spatial resolution, its inherent translatability to three-dimensional (3-D) imaging, as well as the theoretical ability to remove parasitic Raman signal from probe encasements, such as a DBS electrode. The system is planned to have clinical implications in neurosurgical guidance as well as diseased tissue detection.
Collapse
|
21
|
Co-doped Dy 3+ and Pr 3+ Ga 5Ge 20Sb 10S 65 fibers for mid-infrared broad emission. OPTICS LETTERS 2018; 43:2893-2896. [PMID: 29905717 DOI: 10.1364/ol.43.002893] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/16/2018] [Accepted: 05/10/2018] [Indexed: 06/08/2023]
Abstract
Rare earth ion doped materials are means to obtain cost-effective infrared light sources, with enough brilliance for applications such as gas sensing. Within a sulfide matrix, the simultaneous luminescence of both Pr3+ and Dy3+ in the Ga5Ge20Sb10S65 glass is reported. The use of these two rare earths is giving rise to a broad continuous luminescence in the 2.2-5.5 µm wavelength range, which could be used as a mid-infrared light source for gas-sensing applications. The demonstration of CO2 and CH4 detection using a fiber drawn from these materials is reported.
Collapse
|
22
|
A Wireless Headstage for Combined Optogenetics and Multichannel Electrophysiological Recording. IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS 2017; 11:1-14. [PMID: 27337721 DOI: 10.1109/tbcas.2016.2547864] [Citation(s) in RCA: 37] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
This paper presents a wireless headstage with real-time spike detection and data compression for combined optogenetics and multichannel electrophysiological recording. The proposed headstage, which is intended to perform both optical stimulation and electrophysiological recordings simultaneously in freely moving transgenic rodents, is entirely built with commercial off-the-shelf components, and includes 32 recording channels and 32 optical stimulation channels. It can detect, compress and transmit full action potential waveforms over 32 channels in parallel and in real time using an embedded digital signal processor based on a low-power field programmable gate array and a Microblaze microprocessor softcore. Such a processor implements a complete digital spike detector featuring a novel adaptive threshold based on a Sigma-delta control loop, and a wavelet data compression module using a new dynamic coefficient re-quantization technique achieving large compression ratios with higher signal quality. Simultaneous optical stimulation and recording have been performed in-vivo using an optrode featuring 8 microelectrodes and 1 implantable fiber coupled to a 465-nm LED, in the somatosensory cortex and the Hippocampus of a transgenic mouse expressing ChannelRhodospin (Thy1::ChR2-YFP line 4) under anesthetized conditions. Experimental results show that the proposed headstage can trigger neuron activity while collecting, detecting and compressing single cell microvolt amplitude activity from multiple channels in parallel while achieving overall compression ratios above 500. This is the first reported high-channel count wireless optogenetic device providing simultaneous optical stimulation and recording. Measured characteristics show that the proposed headstage can achieve up to 100% of true positive detection rate for signal-to-noise ratio (SNR) down to 15 dB, while achieving up to 97.28% at SNR as low as 5 dB. The implemented prototype features a lifespan of up to 105 minutes, and uses a lightweight (2.8 g) and compact [Formula: see text] rigid-flex printed circuit board.
Collapse
|
23
|
Rare-earth doped fluoride phosphate glasses: structural foundations of their luminescence properties. Phys Chem Chem Phys 2017; 19:21612-21624. [PMID: 28766615 DOI: 10.1039/c7cp03927a] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
We report a detailed structural investigation of a series of fluoride–phosphate glasses with different phosphate/fluoride ratios in the system xSr(PO3)2–(100 − x)[AlF3–CaF2–SrF2–MgF2] with x = 5, 10, 20, 40.
Collapse
|
24
|
Upconversion nanoparticle-decorated gold nanoshells for near-infrared induced heating and thermometry. J Mater Chem B 2017; 5:7109-7117. [DOI: 10.1039/c7tb01621b] [Citation(s) in RCA: 26] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Abstract
The present work involves the design of a multifunctional system based on gold nanoshells (AuNSs) decorated with lanthanide-based upconversion nanoparticles (UCNPs) intended as an optical heater and temperature probe at the nanoscale.
Collapse
|
25
|
Fabrication of axicon microlenses on capillaries and microstructured fibers by wet etching. OPTICS EXPRESS 2016; 24:20346-20358. [PMID: 27607641 DOI: 10.1364/oe.24.020346] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
A facile method is presented for the fabrication of microlenses at the facet of fused silica capillaries and microstructured fibers. After submersion in hydrogen fluoride solution water is pumped slowly through the center hole of the capillary microchannel to create an etchant gradient extending from the capillary axis. The desired axicon angle is generated by adjusting the etching time and/or concentration of the etchant. Similarly, flow- assisted HF etching of a custom microstructured fiber containing nine microchannels produces nine individual microlenses simultaneously at the fiber facet, where each microaxicon lens shows a similar focusing pattern. A theoretical model of the flow-assisted etching process is used to determine the axicon angle and post angle. Also, a simple ray-based model was applied to characterize the focusing properties of the microaxicons in good agreement with experimental observations.
Collapse
|
26
|
Fabrication of ultrafast laser written low-loss waveguides in flexible As₂S₃ chalcogenide glass tape. OPTICS LETTERS 2016; 41:203-6. [PMID: 26766674 DOI: 10.1364/ol.41.000203] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
As2S3 glass has a unique combination of optical properties, such as wide transparency in the infrared region and a high nonlinear coefficient. Recently, intense research has been conducted to improve photonic devices using thin materials. In this Letter, highly uniform rectangular single-index and 2 dB/m loss step-index optical tapes have been drawn by the crucible technique. Low-loss (<0.15 dB/cm) single-mode waveguides in chalcogenide glass tapes have been fabricated using femtosecond laser writing. Optical backscatter reflectometry has been used to study the origin of the optical losses. A detailed study of the laser writing process in thin glass is also presented to facilitate a repeatable waveguide inscription recipe.
Collapse
|
27
|
Plasmon-photon conversion to near-infrared emission from Yb(3+): (Au/Ag-nanoparticles) in tungsten-tellurite glasses. Sci Rep 2016; 6:18464. [PMID: 26725938 PMCID: PMC4698745 DOI: 10.1038/srep18464] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/09/2015] [Accepted: 11/17/2015] [Indexed: 11/17/2022] Open
Abstract
This manuscript reports on the interaction between 2F5/2→2F7/2 radiative transition from Yb3+ ions and localized surface plasmon resonance (from gold/silver nanoparticles) in a tungsten-tellurite glass. Such an interaction, similar to the down-conversion process, results in the Yb3+ emission in the near-infrared region via resonant and non-resonant energy transfers. We associated such effects with the dynamic coupling described by the variations generated by the Hamiltonian HDC in either the oscillator strength, or the local crystal field, i.e. the line shape changes in the emission band. Here, the Yb3+ ions emission is achieved through plasmon-photon coupling, observable as an enhancement or quenching in the luminescence spectra. Metallic nanoparticles have light-collecting capability in the visible spectrum and can accumulate almost all the photon energy on a nanoscale, which enable the excitation and emission of the Yb3+ ions in the near-infrared region. This plasmon-photon conversion was evaluated from the cavity’s quality factor (Q) and the coupling (g) between the nanoparticles and the Yb3+ ions. We have found samples of low-quality cavities and strong coupling between the nanoparticles and the Yb3+ ions. Our research can be extended towards the understanding of new plasmon-photon converters obtained from interactions between rare-earth ions and localized surface plasmon resonance.
Collapse
|
28
|
Bacterial Cellulose Membranes as a Potential Drug Delivery System for Photodynamic Therapy of Skin Cancer. J BRAZIL CHEM SOC 2016. [DOI: 10.5935/0103-5053.20160080] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022] Open
|
29
|
GLASSY MATERIALS AND LIGHT: PART 1. QUIM NOVA 2016. [DOI: 10.5935/0100-4042.20160016] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022] Open
|
30
|
GLASSY MATERIALS AND LIGHT: PART 2. QUIM NOVA 2016. [DOI: 10.5935/0100-4042.20160017] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022] Open
|
31
|
A Wireless Multi-Sensor Dielectric Impedance Spectroscopy Platform. SENSORS 2015; 15:23572-88. [PMID: 26393587 PMCID: PMC4610548 DOI: 10.3390/s150923572] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/01/2015] [Revised: 08/31/2015] [Accepted: 09/11/2015] [Indexed: 11/16/2022]
Abstract
This paper describes the development of a low-cost, miniaturized, multiplexed, and connected platform for dielectric impedance spectroscopy (DIS), designed for in situ measurements and adapted to wireless network architectures. The platform has been tested and used as a DIS sensor node on ZigBee mesh and was able to interface up to three DIS sensors at the same time and relay the information through the network for data analysis and storage. The system is built from low-cost commercial microelectronics components, performs dielectric spectroscopy ranging from 5 kHz to 100 kHz, and benefits from an on-the-fly calibration system that makes sensor calibration easy. The paper describes the microelectronics design, the Nyquist impedance response, the measurement sensitivity and accuracy, and the testing of the platform for in situ dielectric impedance spectroscopy applications pertaining to fertilizer sensing, water quality sensing, and touch sensing.
Collapse
|
32
|
Carbonic anhydrase XII in valve interstitial cells promotes the regression of calcific aortic valve stenosis. J Mol Cell Cardiol 2015; 82:104-15. [PMID: 25771146 DOI: 10.1016/j.yjmcc.2015.03.002] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/12/2014] [Revised: 02/20/2015] [Accepted: 03/02/2015] [Indexed: 02/05/2023]
Abstract
AIMS Calcific aortic valve stenosis (CAVS) is the most common heart valve disease. In the present work we sought to determine the reversibility of mineralization in the aortic valve. METHODS AND RESULTS By using in vitro analyses we found that valve interstitial cells (VICs) have the ability to resorb minerals. We documented that agonist of P2Y2 receptor (P2Y2R) promoted the expression of carbonic anhydrase XII (CAXII) at the cell membrane of VICs, whereby minerals are resorbed. P2Y2R-mediated mineral resorption was corroborated by using mouse VICs isolated from wild type and P2Y2R(-/-) mice. Measurements of extracellular pH (pHe) by using core-shell nanosensors revealed that P2Y2R-mediated CAXII export to the cell membrane led to an acidification of extracellular space, whereby minerals are resorbed. In vivo, we next treated LDLR(-/-)/ApoB(100/100)/IGF2 mice, which had developed CAVS under a high-fat/high-sucrose diet for 8 months, with 2-thioUTP (a P2Y2R agonist) or saline for the next 2 months. The administration of 2-thioUTP (2mg/kg/day i.p.) reduced the mineral volume in the aortic valve measured with serial microCT analyses, which improved hemodynamics and reduced left ventricular hypertrophy (LVH). Examination of leaflets at necropsy confirmed a lower level of mineralization and fibrosis along with higher levels of CAXII in mice under 2-thioUTP. In another series of experiment, the administration of acetazolamide (a CA inhibitor) prevented the acidification of leaflets and the regression of CAVS induced by 2-thioUTP in LDLR(-/-)/ApoB(100/100)/IGF2 mice. CONCLUSION P2Y2R-mediated expression of CAXII by VICs acidifies the extracellular space and promotes the regression of CAVS.
Collapse
|
33
|
Abstract
We report for the first time the characterization of glass-ceramics for optical refrigeration. Ytterbium-doped nanocrystallites were grown in an oxyfluoride glass matrix of composition 2YbF(3):30SiO(2)-15Al(2)O(3)-25CdF(2)-22PbF(2)-4YF(3), forming bulk glass-ceramics at three different crystalisation levels. The samples are compared with a corresponding uncrystalised (glass) sample, as well as a Yb:YAG sample which has presented optical cooling. The measured X-ray diffraction spectra, and thermal capacities of the samples are reported. We also report for the first time the use of Yb:YAG as a reference for absolute photometric quantum efficiency measurement, and use the same setup to characterize the glass and glass-ceramic samples. The cooling figure-of-merit was measured by optical calorimetry using a fiber Bragg grating and found to depend on the level of crystallization of the sample, and that samples with nanocrystallites result in higher quantum efficiency and lower background absorption than the pure-glass sample. In addition to laser-induced cooling, the glass-ceramics have the potential to serve as a reference for quantum efficiency measurements.
Collapse
|
34
|
Novel wireless-communicating textiles made from multi-material and minimally-invasive fibers. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2015; 2014:6278-81. [PMID: 25571432 DOI: 10.1109/embc.2014.6945064] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
The ability to integrate multiple materials into miniaturized fiber structures enables the realization of novel biomedical textile devices with higher-level functionalities and minimally-invasive attributes. In this work, we present novel textile fabrics integrating unobtrusive multi-material fibers that communicate through 2.4 GHz wireless networks with excellent signal quality. The conductor elements of the textiles are embedded within the fibers themselves, providing electrical and chemical shielding against the environment, while preserving the mechanical and cosmetic properties of the garments. These multi-material fibers combine insulating and conducting materials into a well-defined geometry, and represent a cost-effective and minimally-invasive approach to sensor fabrics and bio-sensing textiles connected in real time to mobile communications infrastructures, suitable for a variety of health and life science applications.
Collapse
|
35
|
Luminescent Terbium Doped Aluminate Particles: Properties and Surface Modification with Asparagine. J BRAZIL CHEM SOC 2015. [DOI: 10.5935/0103-5053.20150213] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022] Open
|
36
|
Tailoring the refractive index of Ge-S based glass for 3D embedded waveguides operating in the mid-IR region. OPTICS EXPRESS 2014; 22:26103-16. [PMID: 25401643 DOI: 10.1364/oe.22.026103] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
The photosensitivity of GeS(x) binary glasses in response to irradiation to femtosecond pulses at 800 nm is investigated. Samples with three different molecular compositions were irradiated under different exposure conditions. The material response to laser exposure was characterized by both refractometry and micro-Raman spectroscopy. It is shown that the relative content of sulfur in the glass matrix influences the photo-induced refractive index modification. At low sulfur content, both positive and negative index changes can be obtained while at high sulfur content, only a positive index change can be reached. These changes were correlated with variations in the Raman response of exposed glass which were interpreted in terms of structural modifications of the glass network. Under optimized exposure conditions, waveguides with positive index changes of up to 7.8 x 10(-3)and a controllable diameter from 14 to 25 μm can be obtained. Direct inscription of low insertion losses (IL = 3.1 - 3.9 dB) waveguides is demonstrated in a sample characterized by a S/Ge ratio of 4. The current results open a pathway towards the use of Ge-S binary glasses for the fabrication of integrated mid-infrared photonic components.
Collapse
|
37
|
Novel wireless-communicating textiles made from multi-material and minimally-invasive fibers. SENSORS 2014; 14:19260-74. [PMID: 25325335 PMCID: PMC4239944 DOI: 10.3390/s141019260] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/26/2014] [Revised: 09/24/2014] [Accepted: 10/08/2014] [Indexed: 11/16/2022]
Abstract
The ability to integrate multiple materials into miniaturized fiber structures enables the realization of novel biomedical textile devices with higher-level functionalities and minimally-invasive attributes. In this work, we present novel textile fabrics integrating unobtrusive multi-material fibers that communicate through 2.4 GHz wireless networks with excellent signal quality. The conductor elements of the textiles are embedded within the fibers themselves, providing electrical and chemical shielding against the environment, while preserving the mechanical and cosmetic properties of the garments. These multi-material fibers combine insulating and conducting materials into a well-defined geometry, and represent a cost-effective and minimally-invasive approach to sensor fabrics and bio-sensing textiles connected in real time to mobile communications infrastructures, suitable for a variety of health and life science applications.
Collapse
|
38
|
REGRESSION OF CALCIFIC AORTIC VALVE STENOSIS: A NOVEL FUNCTION FOR VALVE INTERSTITIAL CELLS AND CARBONIC ANHYDRASE XII. Can J Cardiol 2014. [DOI: 10.1016/j.cjca.2014.07.422] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022] Open
|
39
|
Control of the radiative properties via photon-plasmon interaction in Er3+ -Tm3+ -codoped tellurite glasses in the near infrared region. OPTICS EXPRESS 2014; 22:21122-21136. [PMID: 25321311 DOI: 10.1364/oe.22.021122] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
The novelty of this paper is that it reports on the tuning of the spectral properties of Er3+ -Tm3+ ions in tellurite glasses in the near-infrared region through the incorporation of silver or gold nanoparticles. These noble metal nanoparticles can improve the emission intensity and expand the bandwidth of the luminescence spectrum centered at 1535 nm, covering practically all the optical telecommunication bands (S, C + L and U), and extended up to 2010 nm wavelength under excitation by a 976 nm laser diode. Both effects are obtained by the combined emission of Er3+ and Tm3+ ions due to efficient energy transfer processes promoted by the presence of silver or gold nanoparticles for the (Er3+)4I(11/2)→(Tm3+)3H5, (Er3+)4I(13/2)→(Tm3+)3H4 and (Er3+)4I(13/2)→(Tm3+)3F4 transitions. The interactions between the electronic transitions of Er3+ and Tm3+ ions that provide a tunable emission are associated with the dynamic coupling mechanism described by the variations generated by the Hamiltonian H DC in either the oscillator strength or the local crystal field, i.e. the line shape changes in the near-infrared emission band. The Hamiltonian is expressed as eigenmodes associated with the density of the conduction electron generated by the different nanoparticles through its collective free oscillations at each resonance frequency of the nanoparticle and their geometric dependence. A complete description of photon-plasmon interactions of noble metal nanoparticles with the Er3+ and Tm3+ ions is provided.
Collapse
|
40
|
Few-mode fiber with inverse-parabolic graded-index profile for transmission of OAM-carrying modes. OPTICS EXPRESS 2014; 22:18044-18055. [PMID: 25089424 DOI: 10.1364/oe.22.018044] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
A novel type of few-mode fiber, characterized by an inverse-parabolic graded-index profile, is proposed for the robust transmission of cylindrical vector modes as well as modes carrying quantized orbital angular momentum (OAM). Large effective index separations between vector modes (>2.1 × 10(-4)) are numerically calculated and experimentally confirmed in this fiber over the whole C-band, enabling transmission of OAM(+/-1,1) modes for distances up to 1.1 km. Simple design rules are provided for the optimization of the fiber parameters.
Collapse
|
41
|
Abstract
The reflectogram of a fiber grating is used to characterize vector modes of an optical fiber supporting orbital angular momentum states. All modes, with a minimal effective index separation around 10(-4), are simultaneously measured. OAM states are reflected by the FBG, along with a charge inversion, at the center wavelength of the Bragg reflection peak of the corresponding fiber vector mode.
Collapse
|
42
|
P2Y2 Receptor-Mediated Expression of Carbonic Anhydrase XII and Functional Interaction With SLC4A3/AE3 Promotes Regression of Valve Mineralisation in Calcific Aortic Valve Disease. Can J Cardiol 2013. [DOI: 10.1016/j.cjca.2013.07.331] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/26/2022] Open
|
43
|
Abstract
We report the first demonstration of a Raman fiber laser (RFL) emitting in the mid-infrared, above 3 μm. The operation of a single-mode As2S3 chalcogenide glass based RFL at 3.34 μm is demonstrated by using a low-loss Fabry-Pérot cavity formed by a pair of fiber Bragg gratings. A specially designed quasi-cw erbium-doped fluoride fiber laser emitting at 3.005 μm is used to pump the RFL. A laser output peak power of 0.6 W is obtained with a lasing efficiency of 39% with respect to the launched pump power.
Collapse
|
44
|
Self-organized periodic structures on Ge-S based chalcogenide glass induced by femtosecond laser irradiation. OPTICS EXPRESS 2012; 20:29882-29889. [PMID: 23388814 DOI: 10.1364/oe.20.029882] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
Self-organized periodic structures have been observed on the surface of the ablation craters of Ge-S based chalcogenide glass produced after irradiation by a focused beam of a femtosecond Ti:sapphire laser (1 kHz, 34 fs, 806 nm). Scanning electron microscopy and atomic force microscopy images of irradiated spots show a periodic structure of ripples with a spatial period of 720 nm (close to the wavelength of fs laser pulses) and an alignment parallel to the electric field of light. With an increasing number of pulses, from 5 to 50 pulses, a characteristic evolution of ripples was observed from a random structure to a series of generally aligned peaks-and-valleys self-organized periodic structures. Additionally, at the center of the ablated spot, micro-domains appear where the ripples are still regular but are assembled in a more complex fashion. The experimental observations are interpreted in terms of strong temperature gradients combined with interference of the incident laser irradiation and a scattered surface electromagnetic wave.
Collapse
|
45
|
Writing of Bragg gratings through the polymer jacket of low-loss As2S3 fibers using femtosecond pulses at 800 nm. OPTICS LETTERS 2012; 37:3900-3902. [PMID: 23041897 DOI: 10.1364/ol.37.003900] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
Fiber Bragg gratings (FBG) were written through the polymer jacket of low-loss single mode As(2)S(3) chalcogenide fibers by using femtosecond laser pulses at 800 nm and a phase-mask. Peak reflectivity in excess of 99% was obtained at 3440 nm after 5 min of exposure. The resulting FBG maintained a peak reflectivity of 90% after 64 min of thermal annealing at 100 °C. This demonstration paves the way to the development of all-fiber mid-infrared laser sources.
Collapse
|
46
|
Singlet oxygen generation enhanced by silver-pectin nanoparticles. J Fluoresc 2012; 22:1633-8. [PMID: 22843254 DOI: 10.1007/s10895-012-1107-4] [Citation(s) in RCA: 39] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2012] [Accepted: 06/27/2012] [Indexed: 01/06/2023]
Abstract
We demonstrate the potential application of silver-pectin nanoparticles on photodynamic therapy, on a solution-base platform. Photodynamic therapy is a medical technique which uses a combination of photosensitizing drugs and light to induce selective damage on the target tissue, by electronically excited and highly reactive singlet state of oxygen. Metal enhanced singlet oxygen generation in riboflavin water solution with silver-pectin nanoparticles was observed and quantified. Here 13 nm silver nanospheres enclosed by a pectin layer were synthesized and it interaction with riboflavin molecule was analyzed. Pectin, a complex carbohydrate found in plants primary cell walls, was used to increase the biocompatibility of the silver nanoparticles and to improve metal enhanced singlet oxygen generation (28.5 %) and metal-enhanced fluorescence (30.7 %) processes at room temperature. The singlet oxygen sensor fluorescent green reagent was used to quantify the enhancement of the riboflavin singlet oxygen production induced by the silver colloid. We report a 1.7-fold increase of riboflavin emission and a 1.8-fold enhancement of singlet oxygen production.
Collapse
|
47
|
Study of the photosensitivity of GeS binary glasses to 800 nm femtosecond pulses. OPTICS EXPRESS 2012; 20:2824-2831. [PMID: 22330518 DOI: 10.1364/oe.20.002824] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
We present the first study of the photosensitivity of GeS binary glasses in response to irradiation to femtosecond pulses at 800 nm. A maximum positive refractive index change of 3.5x10(-3) is demonstrated with the possibility to control the waveguide diameter from ~8 to ~50 µm by adjusting the input pulse energy. It is also demonstrated that under different exposure conditions, a maximum negative index change of -7.5x10(-3) can be reached. The present results clearly illustrate the potential of this family of glasses for the fabrication of mid-infrared waveguides.
Collapse
|
48
|
Upconversion ultraviolet random lasing in Nd3+ doped fluoroindate glass powder. OPTICS EXPRESS 2011; 19:5620-5626. [PMID: 21445202 DOI: 10.1364/oe.19.005620] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
An upconversion random laser (RL) operating in the ultraviolet is reported for Nd3+ doped fluoroindate glass powder pumped at 575 nm. The RL is obtained by the resonant excitation of the Nd3+ state 2G7/2 followed by energy transfer among two excited ions such that one ion in the pair decays to a lower energy state and the other is promoted to state 4D7/2 from where it decays emitting light at 381 nm. The RL threshold of 30 kW/cm2 was determined by monitoring the photoluminescence intensity as a function of the pump laser intensity. The RL pulses have time duration of 29 ns that is 50 times smaller than the decay time of the upconversion signal when the sample is pumped with intensities below the RL laser threshold.
Collapse
|
49
|
Rare earth doped SnO2 nanoscaled powders and coatings: enhanced photoluminescence in water and waveguiding properties. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY 2011; 11:2433-2439. [PMID: 21449404 DOI: 10.1166/jnn.2011.3535] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
Luminescent Eu3+ and Er3+ doped SnO2 powders have been prepared by Sn4+ hydrolysis followed by a controlled growth reaction using a particle's surface modifier in order to avoid particles aggregation. The powders so obtained doped with up to 2 mol% rare earth ions are fully redispersable in water at pH > 8 and present the cassiterite structure. Particles size range from 3 to 10 nm as determined by Photon Correlation Spectroscopy. Rare earth ions were found to be essentially incorporated into the cassiterite structure, substituting for Sn4+, for doping concentration smaller than 0.05 mol%. For higher concentration they are also located at the particles surface. The presence of Eu3+ ions at the surface of the particles hinder their growth and has therefore allowed the preparation of new materials consisting of water redispersable powders coated with Eu(3+)-beta diketonate complexes. Enhanced UV excited photoluminescence was observed in water. SnO2 single layers with thickness up to 200 nm and multilayer coatings were spin coated on borosilicate glass substrates from the colloidal suspensions. Waveguiding properties were evaluated by the prism coupling technique. For a 0.3 microm planar waveguide single propagating mode was observed with attenuation coefficient of 3.5 dB/cm at 632.8 nm.
Collapse
|
50
|
|