Evaluation of particle generation due to deterioration of flooring in schools

Particulate matter is harmful to humans. An important indoor source of such particles is the deterioration of floor materials brought about by occupants walking. Accordingly, an experiment was conducted to simulate the deterioration of floor material spacing. Considering a school schedule with repeated semesters and vacations, the experiment was conducted by repeating heat-and-rest cycles. Similar results were obtained for particle emission rates under each condition during the first and second deterioration periods. The PVC tiles generated more particles under aged conditions than under non-aged conditions, whereas the wood generated fewer particles under aged conditions. In addition to the quantitative results, a study was conducted on the characteristics of the generated particles, and the particulate matter found in plastic was confirmed in the PVC tiles. Schools where children are present for more than 6 h a day may be exposed to more particulate matter. Therefore, replacing plastic-based materials with eco-friendly building materials is expected to have long-term health benefits for children.

Comparing the effectiveness of pulsed radiofrequency treatment to lumbar dorsal root ganglion according to application times in patients with lumbar radicular pain: protocol for a randomised controlled trial

INTRODUCTION

Lumbar radicular pain (LRP) is a common symptom characterised by a sharp, shooting or lancinating sensation localised to one or more dermatomes of the lumbar spine. Despite its high prevalence and significant impact on quality of life, the most effective conservative treatment for patients with LRP remains uncertain. When conventional treatment methods do not provide satisfactory results, the option of using epidural steroids and/or pulsed radiofrequency (PRF) treatment may be considered as a secondary approach for managing the condition. Ongoing advances in the field have led to a wide range of PRF parameters being investigated and extensively documented. Therefore, this study will aim to evaluate the treatment efficacy, sustainability and adverse effects of PRF application for different durations in patients with LRP.

METHODS AND ANALYSIS

This study will be a double-blind, randomised, controlled trial. Eligible patients with LRP who visit the International St. Mary's Hospital pain clinic in Korea will be assigned to three groups (1:1:1 ratio) based on the duration of PRF application: 240, 360 and 480 s. Outcome measures will include an assessment of radicular pain intensity, physical function, global improvement, treatment satisfaction and adverse events. The primary outcome will be a Numeric Rating Scale (NRS) score 3 months after the procedure. The secondary outcomes will be the number of subjects in each group reporting successful treatment defined as a significant decrease of NRS or improved physical function score or high satisfaction at the 3 and 6 months follow-up. X2 or Fisher's exact test and one-way analysis of variance will be used to compare the outcomes.

ETHICS AND DISSEMINATION

This trial was approved by the Ethics Committee of Catholic Kwandong University International St. Mary's Hospital (IS23EISE0018). The findings will be disseminated in peer-reviewed journals and at scientific conferences.

TRIAL REGISTRATION NUMBER

KCT0008612.

Pulsed radiofrequency of lumbar dorsal root ganglion for lumbar radicular pain: A systematic review and meta-analysis

BACKGROUND

Pulsed radiofrequency (PRF) of the lumbar dorsal root ganglion (DRG) has been widely used as a method to relieve lumbar radicular pain (LRP). However, the value of PRF application in LRP patients remains uncertain. This systematic review aimed to compare the effects of PRF of lumbar DRG and LEI in patients with LRP.

METHODS

A literature search was performed using well-known databases for articles published up to May 2023. We included randomized controlled trials (RCTs) that evaluated the effects of PRF compared to LEI with or without steroids. We screened articles, extracted data, and assessed risk of bias in duplicate. The pain scores and Oswestry Disability Index (ODI) scores at 1, 3, and 6 months after procedures were obtained. A random-effects meta-analysis model was applied for outcomes. We evaluated evidence certainty for each outcome using the GRADE scoring system. This review was registered in the PROSPERO (ID: CRD42021253628).

RESULTS

A total of 10 RCTs were included and data of 613 patients were retrieved. We assessed the overall quality of the evidence as very low to moderate. PRF showed no difference in pain scores at 1 (mean difference [MD] -0.80, 95% confidence interval [CI] -1.59 to 0.00, low certainty) and 6 months (MD -2.37, 95% CI -4.79 to 0.05, very low certainty), and significantly improved pain scores at 3 months (MD -1.31, 95% CI -2.29 to -0.33, low certainty). There was no significant difference in ODI score at any interval (very low to low certainty). In the subgroup who underwent a diagnostic block, did not use steroids, and PRF duration greater than 360 s, PRF significantly reduced pain scores at 3 months after procedures.

CONCLUSIONS

We found low quality of the evidence supporting adjuvant PRF to the lumbar DRG has a greater analgesic effect at 3 months after procedures in patients with LRP than LEI. We identified no convincing evidence to show that this treatment improves function. High-quality evidence is lacking, and data were largely derived from short-term effects. Given these limitations, high-quality trials with data on long-term effects are needed.

Surgical versus nonsurgical management of lumbar degenerative spondylolisthesis based on spinal canal cross-sectional area

Disability and pain associated with lumbar degenerative spondylolisthesis (LDS) result in a significant burden on both the healthcare costs and patients' quality of life. Currently, there exists controversy regarding employment of either nonsurgical management (NSM) or surgical management (SM) in a clinical setting. Spinal canal cross-sectional area (SCA) has been an important morphological parameter for the analysis of LDS. However, there is lack of research about the comparative value of NSM and SM according to SCA. Moreover, previous research have not yet evaluated the clinical most suitable cutoff values of SCA. The objective of this research was to evaluate the effective of NSM and SM for LDS using SCA as an objective morphological parameter. The axial T2 magnetic resonance imaging images were obtained from each patient. We collected SCA samples from 149 patients with LDS. 72 patients underwent SM and the rest did NSM. We measured SCA at the L4/5 LDS on magnetic resonance imaging using a picture archiving and communications system. We measured SCA at the intervertebral disk posterior border, turning down to reach the facet joint side on the opposite edge at the L4/5 level. The average SCA value was 114.34 ± 48.11 mm2 in the NSM group and 69.88 ± 27.87 mm2 in the SM group. Therefore, the SM group had considerably lower SCA (P < .001). In view of the effectiveness of SCA as a prediction factor of surgical option, Receiver Operating Characteristic curve analysis show the optimal cutoff value for SCA as 83.21 mm2, with 70.8% sensitivity, 71.4% specificity, and an area under the curve of 0.80 (95% CI, 0.73-0.87). The narrower the SCA, the higher the probability of SM. Thus, it is proposed that to evaluate surgical decision making, the pain physician should carefully inspect the SCA.

The cervical ligamentum flavum area: A new sensitive morphological parameter for identifying the cervical spinal stenosis

Thickening of the cervical ligamentum flavum (CLF) has been considered as a main cause of cervical spinal stenosis (CSS). A previous study reported that cervical ligamentum flavum thickness (CLFT) is correlated with CSS. However, the whole hypertrophy is different from focal thickness. Therefore, to analyze hypertrophy of the CLF, we created a new morphological parameter, called the cervical ligamentum flavum area (CLFA). We hypothesized that the CLFA is an important morphological parameter in the diagnosis of CSS. CLF samples were acquired from 83 patients with CSS, and from 84 controls who underwent cervical magnetic resonance imaging (C-MRI). T2-weighted axial C-MRI images were acquired. We measured the CLFA and CLFT at the C6-C7 intervertebral level on C-MRI using appropriate image analysis software. The CLFA was measured as the cross-sectional area of the entire CLF at the level of C6-C7 stenosis. The CLFT was measured by drawing a straight line along the ligament side towards the spinal canal at the C6-C7 level. Mean CLFA was 25.24 ± 6.43 mm2 in the control group and 45.34 ± 9.09 mm2 in the CSS group. The average CLFT was 1.48 ± 0.28 mm in the control group and 2.09 ± 0.35 mm in the CSS group. CSS patients had significantly higher CLFA (P < .01) and CLFT (P < .01). For the validity of both CLFA and CLFT as predictors of CSS, a receiver operating characteristic curve analysis revealed an optimal cutoff point for the CLFA was 31.66 mm2, a sensitivity of 92.8%, specificity of 88.4%, and an area under the curve of 0.97 (95% CI, 0.94-0.99). The optimal cut off-point of the CLFT was 1.79 mm, with a sensitivity of 83.5%, specificity of 84.5%, and an area under the curve of 0.92 (95% CI, 0.87-0.96). Both CLFT and CLFA were significantly related to CSS, but CLFA was the more sensitive measurement parameter. Therefore, to evaluate patients with CSS, treating physicians should test for CLFA.

Advances in Biocarbon and Soft Material Assembly for Enthalpy Storage: Fundamentals, Mechanisms, and Multimodal Applications

High-value-added biomass materials like biocarbon are being actively pursued integrating them with soft materials in a broad range of advanced renewable energy technologies owing to their advantages, such as lightweight, relatively low-cost, diverse structural engineering applications, and high energy storage potential. Consequently, the hybrid integration of soft and biomass-derived materials shall store energy to mitigate intermittency issues, primarily through enthalpy storage during phase change. This paper introduces the recent advances in the development of natural biomaterial-derived carbon materials in soft material assembly and its applications in multidirectional renewable energy storage. Various emerging biocarbon materials (biochar, carbon fiber, graphene, nanoporous carbon nanosheets (2D), and carbon aerogel) with intrinsic structures and engineered designs for enhanced enthalpy storage and multimodal applications are discussed. The fundamental design approaches, working mechanisms, and feature applications, such as including thermal management and electromagnetic interference shielding, sensors, flexible electronics and transparent nanopaper, and environmental applications of biocarbon-based soft material composites are highlighted. Furthermore, the challenges and potential opportunities of biocarbon-based composites are identified, and prospects in biomaterial-based soft materials composites are presented.

Output Current and Efficacy of Pulsed Radiofrequency of the Lumbar Dorsal Root Ganglion in Patients With Lumbar Radiculopathy: A Prospective, Double-blind, Randomized Pilot Study

BACKGROUND

Lumbar radicular pain (LRP) is a common but challenging clinical symptom. Pulsed radiofrequency (PRF), a neuromodulation technique that uses short pulses of radiofrequency current, is effective in treating various pain disorders. However, few studies have been conducted on the effects of PRF and its modifying parameters.

OBJECTIVES

Our study aimed to determine the intraoperative parameters of PRF of the lumbar dorsal root ganglion (DRG) that are related to clinical effects in patients with LRP unresponsive to transforaminal epidural steroid injections (TFESI).

STUDY DESIGN

Prospective double-blind randomized controlled trial, pilot study.

SETTING

Single medical center in the Republic of Korea.

METHODS

Patients were allocated to one of 2 groups, high-voltage (60 V) or standard-voltage (45 V), according to the preset maximum voltage at which the active tip temperature does not exceed 42°C. Intraoperative parameters, such as output current, sensory threshold, and impedance, were measured. The primary outcomes were radicular pain intensity, physical functioning, global improvement and satisfaction with treatment, and adverse events. The assessments were performed up to 3 months postprocedure.

RESULTS

The patients in the standard-voltage group showed significant improvements in the Numeric Rating Scale pain score (P = 0.007) and Oswestry Disability Index (ODI) (P = 0.008) scores at 3 months post-PRF; however, no difference was observed in the high-voltage group. Among the intraoperative parameters, the output current showed a significant negative linear relationship with analgesic efficacy. The output current also showed a significant association with pain intensity (P = 0.005, R2 = 0.422) and ODI score (P = 0.004, R2 = 0.427) at 3 months postprocedure in a multiple regression analysis. The optimal cut-off value of the output current to lower pain intensity after 3 months was 163.5 mA with a sensitivity of 87.5%, specificity of 100%, and an area under the receiver operating characteristic curve value of 0.92 (95% CI. 0.76 - 1.00).

LIMITATIONS

Limitations of our study include an imbalance of baseline characteristics, small sample sizes, and short follow-up periods.

CONCLUSIONS

Lower output currents during PRF application to the lumbar DRG were associated with greater analgesic effects in patients who did not respond to therapeutic TFESI.

Optimal cutoff point of vertebral body cross-sectional area as a morphological parameter for predicting lumbar spondylolysis

The relationship between vertebral body cross-sectional area (VBCSA) and spinal conditions associated with increased lumbar lordosis, such as lumbar spondylolysis (LSL), is not known. We investigated the morphological parameter, VBCSA, to predict LSL. The VBCSA on MRI has not been studied for its association with LSL. We hypothesized that VBCSA is an important morphological parameter for LSL prediction. We collected VBCSA data from 90 patients (43 males and 47 females) with LSL and 91 control subjects (44 males and 47 females) who underwent lumbar spine magnetic resonance imaging (LS-MRI). Axial T2-weighted LS-MRI images were obtained from all participants. Using our picture archiving and communications system, we analyzed the VBCSA at the level of the L5 vertebral body by utilizing MRI. The average VBCSA was 2263.51 ± 306.02 mm2 in the male control group and 1820.92 ± 224.89 mm2 in the male LSL group. LSL patients had significantly lower VBCSAs (P < .001) than did the male controls. The average VBCSA was 1985.21 ± 258.05 mm2 in the female control group and 1553.73 ± 250.02 mm2 in the female LSL group, and the LSL patients also had significantly lower VBCSAs (P < .001) than did the female controls. The optimal VBCSA cutoff value in the male group was 2014.69 mm2 with 76.7% sensitivity, 75.0% specificity, and an area under the receiver operating curve (AUC) of 0.89 (95% CI: 0.82-0.95). In the female group, the optimal cutoff score was 1814.11 mm2 with 76.6% sensitivity, 76.6% specificity, and an AUC of 0.88 (95% CI: 0.82-0.95). VBCSA is a sensitive objective morphological parameter for assessing LSL, and a lower VBCSA is associated with a higher possibility of LSL. We believe that these results will be useful in diagnostic radiology for evaluating patients with LSL.

Magnetic resonance imaging for assessment of the quadriceps tendon cross-sectional area as an adjunctive diagnostic parameter in patients with patellofemoral pain syndrome

OBJECTIVES

In this study, we aimed to provide a more valuable diagnostic parameter and more equivocal assessment of the diagnostic potential of patellofemoral pain syndrome (PFPS) by comparing the quadriceps tendon cross-sectional area (QTCSA) with the quadriceps tendon thickness (QTT), a traditional measure of quadriceps tendon hypertrophy.

PATIENTS AND METHODS

Between March 2014 and August 2020, a total of 30 patients with PFPS (16 males, 14 females; mean age, 30.4±11.2 years; range, 16 to 49 years) and 30 healthy individuals (19 males, 11 females; mean age: 30.8±13.8 years; range, 17 to 62 years) who underwent knee magnetic resonance imaging (MRI) were retrospectively analyzed. T1-weighted turbo spin-echo transverse MRI scans were obtained. The QTCSA was measured on the axial angled phases of the images by drawing outlines, and the QTT was measured at the most hypertrophied quadriceps tendon.

RESULTS

The mean QTT and QTCSA in the patients with PFPS (6.33±0.80 mm and 155.77±36.60 mm2, respectively) were significantly higher than those in the control group (5.77±0.36 mm and 111.90±24.10 mm2, respectively; p<0.001, for both). The receiver operating characteristic curve was used to confirm the sensitivities and specificities for both the QTT and QTCSA as predictors of PFPS. The optimal diagnostic cut-off value for QTT was 5.98 mm, with a sensitivity of 66.7%, a specificity of 70.0%, and an area under the curve (AUC) of 0.75 (range, 0.62 to 0.88). The optimal diagnostic cut-off value for QTCSA was 121.04 mm2, with a sensitivity of 73.3%, a specificity of 70.0%, and an AUC of 0.83 (range, 0.74 to 0.93).

CONCLUSION

Based on our study results, the QTCSA seems to be a more reliable diagnostic indicator for PFPS than QTT.

Comparison of ligamentum flavum thickness between central and lateral lesions in a patient with central lumbar spinal canal stenosis

Thickened ligamentum flavum has been considered as a major cause of central lumbar spinal canal stenosis (CLSCS). Previous studies have demonstrated that ligamentum flavum thickness (LFT) is correlated with aging, degenerative spinal stenosis, and disc degeneration. Thus, hypertrophy of the ligamentum flavum is a major cause of CLSCS, and measurement of LFT has been considered a morphologic parameter in the diagnosis of CLSCS. To our knowledge, comparison of LFT between central and lateral lesions has not been reported. In addition, no research has analyzed best clinical cutoff values of central ligament flavum thickness (CLFT) and lateral ligament flavum thickness (LLFT). This study aimed to compare CLFT with LLFT in patients with CLSCS and further compare the CLFT and LLFT findings between the 2 groups to analyze LFT variation. Both CLFT and LLFT samples were collected from 101 participants with CLSCS and from 103 participants in the control group who underwent lumbar magnetic resonance imaging without evidence of CLSCS. Axial T2-weighted lumbar magnetic resonance scans were acquired at the L4 to 5 facet joint level from each participant. Average CLFT value was 2.25 ± 0.51 mm in the control group and 4.02 ± 0.74 mm in the CLSCS group. Average LLFT value was 2.50 ± 0.51 mm in the control group and 3.38 ± 0.66 mm in the CLSCS group. CLSCS patients had significantly higher CLFT and LLFT (both P < .001). Regarding the validity of both CLFT and LLFT as predictors of CLSCS, a receiver operating characteristic estimation revealed that the most suitable cutoff value for CLFT was 3.10 mm, with sensitivity of 95.0%, specificity of 94.2%, and an area under the curve of 0.97. The best cut-off value of LLFT was 2.92 mm, with sensitivity of 78.2%, specificity of 77.7%, and area under the curve of 0.87. We have 4 important new findings: The mean CLFT is significantly lower than that of the mean LLFT in the normal control group; CLFT and LLFT are both significantly associated with CLSCS; Increase rate of CLFT is faster than that of LLFT in the CLSCS group; and CLFT is a more sensitive measurement parameter to predict CLSCS than LLFT.

Assessment of patellar cartilage cross-sectional area in patients with lower grade chondromalacia patella

Chondromalacia patella (CMP) is abnormal softening of the cartilage of the underside the patella. It is a cause of anterior knee pain. Previous study has demonstrated that the patellar cartilage hypertrophy is correlated with early signs of CMP (Grade 1 or 2). However, no studies have investigated the clinical cutoff value of patella cartilage hypertrophy. Thus, we devised the patellar cartilage cross-sectional area (PCCSA) as a new predictive parameter for diagnosing the CMP. The purpose of this research was to compare MR measured PCCSA between CMP patients and gender matched healthy controls. The PCCSA samples were collected from 50 patients with CMP, and from 50 healthy controls who underwent knee MRI with no evidence of CMP. The T2-weighted turbo spin echo transverse MRI images were acquired. We measured the PCCSA on MRI using a PACS system. The PCCSA was measured on the axial angled sections through the whole images by drawing outlines. The average PCCSA was 104.28 ± 23.28 mm2 in the healthy controls and 134.09 ± 26.55 mm2 in the CMP group. CMP patients had significantly higher PCCSA (P < .001). Regarding the validity of PCCSA as predictors of CMP, Receiver Operating Characteristic curve analysis showed that the best cutoff point for the PCCSA was 116.24 mm2, with 72.0% sensitivity, 72.0% specificity, and the area under curve (AUC) of 0.79 (0.71-0.88). The PCCSA is a sensitive measurement parameter to predict low grade CMP. Thus, to evaluate CMP patients, the treating physician carefully inspect the PCCSA.

Nanopolyhybrids: Materials, Engineering Designs, and Advances in Thermal Management

The fundamental requirements for thermal comfort along with the unbalanced growth in the energy demand and consumption worldwide have triggered the development and innovation of advanced materials for high thermal-management capabilities. However, continuous development remains a significant challenge in designing thermally robust materials for the efficient thermal management of industrial devices and manufacturing technologies. The notable achievements thus far in nanopolyhybrid design technologies include multiresponsive energy harvesting/conversion (e.g., light, magnetic, and electric), thermoregulation (including microclimate), energy saving in construction, as well as the miniaturization, integration, and intelligentization of electronic systems. These are achieved by integrating nanomaterials and polymers with desired engineering strategies. Herein, fundamental design approaches that consider diverse nanomaterials and the properties of nanopolyhybrids are introduced, and the emerging applications of hybrid composites such as personal and electronic thermal management and advanced medical applications are highlighted. Finally, current challenges and outlook for future trends and prospects are summarized to develop nanopolyhybrid materials.

Comparison of efficacy according to voltage of pulsed radiofrequency treatment to lumbar dorsal root ganglion in patient with lumbar radiculopathy: Pilot study

BACKGROUND

Lumbar radicular pain (LRP) is a common symptom, but a challenging clinical problem. Pulsed radiofrequency (PRF) is a more recently developed technique that uses short pulses of radiofrequency current with intervals of longer pauses to prevent temperature from rising to the level of permanent tissue damage and has been advocated in treatment of such patients. But there were no comparative studies on the analgesic effects according to output voltage during PRF in patients with LRP. The goal of this study is to determine the clinical effect of high-voltage (60V) versus standard-voltage (45V) PRF of lumbar dorsal root ganglion.

METHODS/DESIGN

This study will be a prospective, double-blind randomized controlled pilot study. In this study, total 20 patients will be recruited and distributed equally into 2 groups: high-voltage (60V) PRF, low-voltage (45V) PRF. Outcomes will be radicular pain intensity; physical functioning; global improvement and satisfaction with treatment; and adverse events. The assessments will be performed at the 3-month follow-up period after the end of the treatments. The findings will be analyzed statistically considering a 5% significance level (P ≤ .05).

DISCUSSION

The results of this trial will help determine which voltage could be applied for PRF to dorsal root ganglion in LRP and be a basis for subsequent trials.

Diagnostic value of the posterior talofibular ligament area for chronic lateral ankle instability

An injured posterior talofibular ligament (PTFL) is one of the reasons for chronic lateral ankle instability (CLAI). Previous researches have demonstrated that the PTFL thickness (PTFLT) is associated with chronic ligament injuries. However, ligament hypertrophy is different from ligament thickness. Thus, we created the PTFL cross-sectional area (PTFLCSA) as a diagnostic image parameter to assess the hypertrophy of the whole PTFL. We assumed that the PTFLCSA is a key morphological diagnostic parameter in CLAI. PTFL data were obtained from 15 subjects with CLAI and from 16 normal individuals. The T1-weighted axial ankle-MR (A-MR) images were acquired at the level of PTFL. We measured the PTFLT and PTFLCSA at the posterior aspect of the ankle using our imaging analysis program. The PTFLT was measured as the thickness between point of anterior and posterior fiber of PTFL. The PTFLCSA was calculated as the whole cross-sectional PTFL area. The average PTFLT was 3.43 ± 0.52 mm in the healthy group and 4.89 ± 0.80 mm in the CLAI group. The mean PTFLCSA was 41.06 ± 12.18 mm 2 in the healthy group and 80.41 ± 19.14 mm 2 in the CLAI group. CLAI patients had significantly greater PTFLT ( P < .001) and PTFLCSA ( P < .001) than the healthy group. A receiver operating characteristic curve analysis demonstrated that the optimal cutoff score of the PTFLT was 4.19 mm, with 93.3% sensitivity, 93.7% specificity, and an area under the curve of 0.97. The most suitable cutoff value of the PTFLCSA was 61.15 mm 2 , with 93.3% sensitivity, 100% specificity, and area under the curve of 0.99. Even though the PTFLT and PTFLCSA were both significantly associated with CLAI, the PTFLCSA was a more exact morphological measurement parameter.

Accuracy of suprascapular notch cross-sectional area by MRI in the diagnosis of suprascapular nerve entrapment syndrome: a retrospective pilot study

BACKGROUND

Previous studies have demonstrated that morphological changes in the suprascapular notch are closely associated with suprascapular nerve entrapment syndrome (SNES). Thus, we hypothesized that the suprascapular notch cross-sectional area (SSNCSA) could be a good diagnostic parameter to assess SNES.

METHODS

We acquired suprascapular notch data from 10 patients with SNES and 10 healthy individuals who had undergone shoulder magnetic resonance imaging (S-MRI) and had no evidence of SNES. T2-weighted coronal magnetic resonance images were acquired from the shoulder. We analyzed the SSNCSA at the shoulder on S-MRI using our image-analysis program (INFINITT PACS). The SSNCSA was measured as the suprascapular notch, which was the most affected site in coronal S-MRI images.

RESULTS

The mean SSNCSA was 64.50 ± 8.93 mm2 in the control group and 44.94 ± 10.40 mm2 in the SNES group. Patients with SNES had significantly lower SSNCSA (P < 0.01) than those in the control group. Receiver operating curve analysis showed that the best cut-off of the SSNCSA was 57.49 mm2, with 80.0% sensitivity, 80.0% specificity, and an area under the curve of 0.92 (95% CI [0.79, 1.00]).

CONCLUSIONS

The SSNCSA was found to have acceptable diagnostic properties for detecting SNES. We hope that these results will help diagnose SNES objectively.

The value of the glenohumeral joint cross-sectional area as a morphological parameter of glenohumeral osteoarthritis

Glenohumeral joint (GHJ) space narrowing has been demonstrated to be an important morphologic parameter of glenohumeral osteoarthritis (GHO). However, the morphology of GHJ space is irregular because of degeneration of subchondral bone and articular cartilage. Thus, we devised GHJ cartilage cross-sectional area (GHJCCSA) as a new diagnostic morphological parameter to assess the irregular morphologic change of GHJ. GHJ samples were acquired from 33 patients with GHO and from 33 normal controls without evidence of GHO based on shoulder magnetic resonance imaging. T2-weighted coronal MRIs were collected at the GHJ level for all individuals. GHJCCSA and GHJ cartilage thickness (GHJCT) at the GHJ were measured on MRIs using a graphic measuring system. The GHJCCSA was measured as the whole cartilage cross-sectional area of the GHJ. The average GHJCCSA was 115.28 ± 17.36 mm2 in normal individuals and 61.77 ± 13.74 mm2 in the GHO group. The mean GHJCT was 2.06 ± 0.35 mm in normal individuals and 1.50 ± 0.28 mm in the GHO group. GHO patients had significantly lower GHJCCSA (P < .001) and GHJCT (P < .001) than normal individuals. Receiver operator characteristics curve analysis revealed that the optimal cutoff score of the GHJCCSA was 82.21 mm2, with a sensitivity of 97.0%, a specificity of 97.0%, and an area under the curve of 0.99 (95% CI: 0.97-1.00). Although GHJCCSA and GHJCT were both significantly associated with GHO, the GHJCCSA was a more sensitive measurement parameter.

The value of the sacroiliac joint area as a new morphological parameter of ankylosing spondylitis

A narrowed sacroiliac joint (SIJ) space has been considered to be a major morphologic parameter of ankylosing spondylitis (AS). Previous studies revealed that the sacroiliac joint thickness (SIJT) correlated with AS in patients. However, irregular narrowing is different from thickness. Thus, we devised a method using the sacroiliac joint cross-sectional area (SIJA) as a new morphological parameter for use in evaluating AS. We hypothesized that the SIJA is a key morphologic parameter in diagnosing AS. SIJ samples were collected from 107 patients with AS, and from 85 control subjects who underwent SIJ-view X-rays that revealed no evidence of AS. We measured the SIJT and SIJA at the SIJ margin on X-rays using our picture archiving and communications system. The SIJT was measured at the narrowest point between the sacrum and the ilium. The SIJA was measured as the entire cross-sectional joint space area of the SIJ in the X-ray images. The average SIJT was 3.09 ± 0.61 mm in the control group, and 1.59 ± 0.52 mm in the AS group. The average SIJA was 166.74 ± 39.98 mm2 in the control group, and 68.65 ± 24.11 mm2 in the AS group. AS patients had significantly lower SIJT (P < .001) and SIJA (P < .001) than the control subjects. Receiver operating characteristics curve analysis showed that the best cutoff point for the SIJT was 2.33 mm, with 92.5% sensitivity, 94.1% specificity, and an area under the curve of 0.97 (95% confidence interval: 0.95-0.99). The optimal cutoff point for the SIJA was 106.19 mm2, with 93.5% sensitivity, 95.3% specificity, and an area under the curve of 0.98 (95% confidence interval: 0.97-1.00). Although the SIJT and SIJA were both significantly associated with AS, the SIJA parameter was a more sensitive measurement. We concluded that the SIJA is an easy-to-use, fast, cheap, and useful new morphological parameter for predicting AS.

The value of the peroneus brevis tendon cross-sectional area in early diagnosing of peroneus brevis tendinitis: The peroneus brevis tendon cross-sectional area

A thickened peroneus brevis tendon has been considered to be an important morphologic parameter of peroneus brevis tendinitis (PBT). Previous researchers have found that the peroneus brevis tendon thickness (PBTT) is correlated with inflammation of the peroneus brevis tendon. However, inflammatory hypertrophic change is different from simple thickness. Thus, we devised the peroneus brevis tendon cross-sectional area (PBTCSA) as a new diagnostic parameter to analyze the hypertrophy of the whole PBT. We assumed that the PBTCSA is a major morphologic parameter useful for early PBT diagnosis. Peroneus brevis tendon images were collected from 22 patients with PBT and from 22 normal subjects who underwent ankle-magnetic resonance imaging and revealed no evidence of PBT. The T1-weighted axial ankle-magnetic resonance imaging images were evaluated at the ankle level from all participants. The PBTT was measured as the thickest point at the transverse image of the peroneus brevis tendon. The PBTCSA was measured as the cross-sectional ligament whole area of the peroneus brevis tendon that was most hypertrophied in the axial A-MR images. The average PBTT was 2.22 ± 0.29 mm in the normal group and 2.85 ± 0.36 mm in the PBT group. The average PBTCSA was 6.98 ± 1.54 mm2 in the normal group and 13.11 ± 2.45 mm2 in the PBT group. PBT patients had significantly greater PBTT (P < .001) and PBTCSA (P < .001) than the normal group did. A receiver operating characteristic curve analysis revealed that the most suitable cutoff value of the PBTT was 2.51 mm, with 81.8% sensitivity and 81.8% specificity, and an AUC for the score was 0.93. The most suitable cutoff value of the PBTCSA was 10.08 mm2, with 90.9% sensitivity and 90.9% specificity, and AUC for the score was 0.98. Even though the PBTT and PBTCSA were both significantly associated with PBT, the PBTCSA was a more sensitive diagnostic parameter.

A new diagnostic morphological parameter for the Carpal tunnel syndrome: The palmaris longus tendon cross-sectional area

Carpal tunnel syndrome (CTS) is correlated with increased intracarpal canal pressure (ICP). The effect of palmaris longus tendon (PLT) loading on ICP is documented in previous researches. PLT loading induces the greatest absolute increase in ICP. Therefore, to analyze the connection between the PLT and CTS, we newly made the measurement of the PLT cross-sectional area (PLTCSA). We assumed that PLTCSA is a reliable diagnostic parameter in the CTS. PLTCSA measurement data were acquired from 21 patients with CTS, and from 21 normal subjects who underwent wrist magnetic resonance imaging (W-MRI). We measured the PLTCSA at the level of pisiform on W-MRI. The PLTCSA was measured on the outlining of PLT. The two different cutoff values in the analysis were determined using receiver operating characteristic (ROC) analysis. The mean PLTCSA was 2.34 ± 0.82 mm2 in the normal group and 3.97 ± 1.18 mm2 in the CTS group. ROC curve analysis concluded that the best cutoff point for the PLTCSA was 2.81 mm2, with 76.2% sensitivity, 71.4% specificity, and area under the curve of 0.88 (95% CI, 0.78-0.98). PLTCSA is a sensitive, new, objective morphological parameter for evaluating CTS.

Microplastic: A particulate matter(PM) generated by deterioration of building materials

Particulate matter (PM), an inhalable material, is generated from various sources, including building materials. To maintain indoor air quality, it is necessary to analyze harmful substances and establish a method for their remediation. The purpose of this study is to identify the particles generated during the deterioration of building materials and analyze the composition of fine dust particles with respect to the degree of deterioration. The concentration of particles generated was analyzed using an SPS30 PM sensor in the built chamber. PM10 and PM2.5 levels of the maximum of 41.95 mg/m³ and 20.63 mg/m³, respectively, were generated from the tested building materials. The components of the collected PM were carbon, hydrogen, and silicon, among others, which are high-molecular-weight compounds. Particles of size 2.5 µm or less were detected, and the possibility of generating nanoplastics was investigated.

Best cutoff score of cervical-pedicle thickness as a morphological parameter for predicting cervical central stenosis

There are various factors for the cause of cervical central stenosis (CCS), such as osteophyte, cervical-disc degeneration, and cervical ligamentum flavum hypertrophy. However, the pedicle of the cervical vertebra has not yet been analyzed for its relationship with CCS. We created a new morphologic parameter called the cervical-pedicle thickness (CPT) to assess the association between CCS and the cervical pedicle. We obtained morphological cases involving the CPT from 82 patients with CCS. There were also 84 in the normal group who underwent cervical spine magnetic resonance imaging (CS-MR) as part of routine health screening. We obtained the T2-weighted CS-MR axial images from group members, and assessed the CPT at the level of the C6 vertebra on CS-MR. The mean CPT was 3.46 ± 0.57 mm in the normal group, 4.97 ± 0.75 mm in the CCS group, which thus had a significantly higher CPT (P < .01) than did the normal group. For the prognostic value of the CPT as a predictor of CCS, ROC analysis indicated that the best cutoff score for the CPT was 4.18 mm, with 93.9% sensitivity, 92.9% specificity, and AUC 0.97. Greater CPT was highly associated with a possibility of CCS. This conclusion will be helpful for assessing the CCS patients.

Body Map of Droplet Distributions During Oropharyngeal Suction to Protect Health Care Workers From Airborne Diseases

PURPOSE

Health care workers (HCWs), and in particular anesthesia providers, often must perform aerosol-generating medical procedures (AGMPs). However, no studies have analyzed droplet distributions on the bodies of HCWs during AGMPs. Therefore, the purpose of this study was to assess and analyze droplet distributions on the bodies of HCWs during suction of oral cavities with and without oral airways and during extubations.

DESIGN

Using a quasi-experiemental design, we assumed the HCWs perform suction and extubation on intubated patients, and we prepared an intubated mannequin mimicking a patient. This study performed the oral suction and extubation on the intubated mannequin (with or without oral airways in place) and analyzed the droplet distributions.

METHODS

We prepared a mannequin intubated with an 8.0 mm endotracheal tube, assuming the situation of general anesthesia. We designed the body mapping gown, and divided it into 10 areas including the head, neck, chest, abdomen, upper arms, forearms, and hands. We classified experiments into group O when suctions were performed on the mannequin with an oral airway, and into group X when the suctions were performed on the mannequin without an oral airway. An experienced board-certified anesthesiologist performed 10 oral suctions on each mannequin, and 10 extubations. We counted the droplets on the anesthesiologist's gown according to the divided areas after each procedure.

FINDINGS

The mean droplet count after suction was 6.20 ± 2.201 in group O and 13.6 ± 4.300 in group X, with a significant difference between the two groups (P < .001). The right and left hands were the most contaminated areas in group O (2.8 ± 1.033 droplets and 2.0 ± 0.943 droplets, respectively). The abdomen, right hand, left forearm, and left hand showed many droplets in group X. (1.3 ± 1.337 droplets, 3.1 ± 1.792 droplets, 3.2 ± 3.910 droplets, and 4.3 ± 2.214 droplets, respectively). The chest, abdomen, and left hand presented significantly more droplets in group X than in group O. The trunk area (chest and abdomen) was exposed to more droplets during extubations than during suctions.

CONCLUSIONS

During suctions, more droplets are splattered from mannequins without oral airways than from those with oral airways. The right and left hands were the most contaminated areas in group O. Moreover, the abdomen, right hand, left forearm, and left hand presented a lot of droplets in group X. In addition, extubations contaminate wider areas (the head, neck, chest and abdomen) of an HCW than suctions.

Aureochromes maintain polyunsaturated fatty acid content in Nannochloropsis oceanica

Nannochloropsis oceanica, like other stramenopile microalgae, is rich in long-chain polyunsaturated fatty acids (LC-PUFAs) such as eicosapentaenoic acid (EPA). We observed that fatty acid desaturases (FADs) involved in LC-PUFA biosynthesis were among the strongest blue light-induced genes in N. oceanica CCMP1779. Blue light was also necessary for maintaining LC-PUFA levels in CCMP1779 cells, and growth under red light led to a reduction in EPA content. Aureochromes are stramenopile-specific proteins that contain a light-oxygen-voltage (LOV)-sensing domain that associates with a flavin mononucleotide and is able to sense blue light. These proteins also contain a basic leucine zipper DNA-binding motif and can act as blue light-regulated transcription factors by associating with an E-box like motif, which we found enriched in the promoters of blue light-induced genes. We demonstrated that, in vitro, two CCMP1779 aureochromes were able to absorb blue light. Moreover, the loss or reduction of the expression of any of the three aureochrome genes led to a decrease in the blue light-specific induction of several FADs in CCMP1779. EPA content was also significantly reduced in NoAUREO2 and NoAUREO4 mutants. Taken together, our results indicate that aureochromes mediate blue light-dependent regulation of LC-PUFA content in N. oceanica CCMP1779 cells.

Passive PM2.5 control plan of educational buildings by using airtight improvement technologies in South Korea

Modern people spend most of their time indoors. Therefore, controlling indoor air quality is one of the most important factors for health. The indoor fine dust concentration is affected by the outdoor fine dust concentration. When the latter is high, it increases due to immersion. Therefore, improving the sealing performance of a building is an effective strategy to reduce indoor fine dust concentration during periods of severe outdoor fine dust without considering indoor fine dust generating factors. Traditional methods of improving the airtightness of a building have focused on replacing windows or doors. However, for reasons such as constructability and economic feasibility, more diverse technologies need to be considered. Due to this necessity, this study applied technologies such as sealing film, sealing lid, and padding to the educational building, and then derived the airtight performance through the blower door experiment, and measured the fine dust concentration to evaluate the effect. As a result of the experiment, it was analyzed that air leakage was reduced by up to 37% and fine dust by 22%.

Evaluation of thermal/acoustic performance to confirm the possibility of coffee waste in building materials in using bio-based microencapsulated PCM

As the demand for coffee has increased, by-product disposal has become a challenge to solve. Many studies are being conducted on how to use coffee waste as building materials to recycle it. In this study, the thermal performance and acoustic performance of a composite developed using bio-based microencapsulated phase change material (MPCM) and coffee waste were evaluated, and the composite was applied as building material. The coffee waste was successfully degreased with ethanol to produce composites, and removal of contaminants and oils was confirmed via scanning electron microscopy. In the phase change process of MPCM, an appropriate amount of thermal energy is absorbed and stored, and the temperature is maintained. MPCM was used in the mixture and the improved thermal performance was evaluated via differential scanning calorimetry analysis, revealing a latent heat of 3.8 J/g for MPCM content of 10%. Further, thermal imaging cameras revealed that an increase in the proportion of MPCM leads to a slower decrease in temperature because of the heat preserved by MPCM over time. In an acoustic performance evaluation, impedance tube test results showed different aspects depending on low, mid, and high-frequency bands. Specifically, at medium frequencies, which correspond to the range of noise generated in cafes, specimens fabricated using MPCM were confirmed to exhibit a higher sound absorption coefficient and an improved acoustic performance. Hence, the composite can be considered an eco-friendly building material with promising thermal and acoustic performance.

Practical solutions with PCM for providing thermal stability of temporary house, school and hospital in disaster situations

Globally, humanity is at risk from the coronavirus disease (COVID-19). To address the shortage of beds in quarantining those infected with COVID-19, hospitals have prepared temporary beds. However, for temporary hospital beds, it is difficult to maintain a comfortable temperature due to lack of insulation and heat storage. Phase change materials (PCMs) are used to provide temperature stability and control for temporary structure. Therefore, this study aimed to conduct experiments that analyze the effect of room temperature stabilization using a PCM. The method of macro packed PCM (MPPCM) was used to apply the PCM to buildings. The MPPCM installation location was selected and the effect of reducing the box temperature was analyzed, according to the strength of the heat source. As a result, a maximum reduction of 4.9 °C in the box temperature was achieved. Therefore, the application of MPPCM to buildings give to stabilize the box temperature. And the result showed the possibility of providing a comfortable indoor space for temporary hospital beds.

Effect of eco-friendly pervious concrete with amorphous metallic fiber on evaporative cooling performance

Impervious pavements exist in large proportions in most cities owing to the high-impact development of the transportation infrastructure. However, this type of pavement causes environmental issues such as waterlogging, floods, and urban heat islands. Pervious concrete (PC), which is a novel pavement material characterized by a porous structure that allows water to percolate through it, is an important solution to these issues. This study investigates the evaporative cooling performance of eco-friendly PC with blast-furnace slag (BFS) as a cement replacement and amorphous metallic fiber (AMF) that helps to accelerate the evaporative cooling. The thermophysical properties, water permeability, and water absorption capability of the manufactured PC were measured. In addition, a scale model test and thermal conductivity analysis of the manufactured PC were conducted to evaluate the evaporative cooling effect. The results indicate that the physical and mechanical properties of the manufactured PC are typically similar to those of other PCs, and its water absorption rate reaches 1 mm/s. Relatively low water permeability helps the PCs to absorb more water, contributing to accumulate a large amount of water in the material for evaporative cooling. In addition, AMF contributes to increase thermal conductivity of PC, which allow the water inside the PCs to evaporate faster. The result shows that a higher thermal conductivity of the manufactured PC increases the evaporative cooling effect.

Prediction of carpal tunnel syndrome using the thenar muscle cross-sectional area by magnetic resonance imaging

Carpal tunnel syndrome (CTS) is a common neuropathy. Although CTS progression is known to be associated with thenar muscle (TM) atrophy, the diagnostic value of TM atrophy for CTS has not been established. In this research, the thenar muscle cross-sectional area (TMCSA) was evaluated to analyze the relationship between the TMCSA and CTS. We assumed that TMCSA is a major diagnostic parameter in the CTS.Both TMCSA and thenar muscle thickness (TMT) samples were acquired from 18 CTS patients, and from 18 control subjects who underwent wrist magnetic resonance imaging with no evidence of CTS. T2-weighted transverse magnetic resonance imaging images were obtained. We measured the TMCSA and TMT at the level of first carpometacarpal joint.The average TMCSA was 296.98 ± 49.39 mm2 in the normal group and 203.36 ± 72.13 mm2 in the CTS group. The average TMT was 8.54 ± 1.45 mm in the normal group and 7.38 ± 1.14 mm in the CTS group. CTS group had significantly lower TMCSA and TMT. Receiver operator characteristics curve analysis showed that the best cutoff point for the TMCSA was 260.18 mm2, with 77.8% sensitivity, 77.8% specificity. The best cutoff point of the TMT was 7.70 mm, with 61.1% sensitivity, 66.7% specificity.Although the TMCSA and TMT were both significantly associated with CTS, the TMCSA was a much more sensitive measurement parameter. Thus, to evaluate CTS patients, the physician should more carefully inspect the TMCSA than TMT.

Hazard evaluation of indoor environment based on long-term pollutant emission characteristics of building insulation materials: An empirical study

Insulation materials are essential components in construction, and their main objective is to increase the efficiency of thermal energy by minimizing internal and external thermal exchange. Accordingly, research and development studies are being actively conducted to increase the thermal resistance of insulation materials, and high-performance insulation materials that use organic chemicals have been developed after industrialization. However, thermal insulation comprising chemicals poses a potential risk of pollutant emissions and can cause health problems. In this study, five types of insulation materials and the contaminants generated from the building materials used in insulation construction were quantitatively analyzed. In addition, an empirical study on the discharge of pollutants was conducted using a test bed, and the effects of the pollutants discharged from the insulation material on the indoor environment were examined by analyzing the pollutant concentration for 90 days. In addition, we analyzed the effect of an insulation material on an indoor environment through the standard specifications. Moreover, the necessity of legal management of the emission of contaminants from insulation materials was proposed based on the empirical research results.

Prognostic value of cervical ligamentum flavum thickness as a morphological parameter to predict cervical stenosis

One of major causes of cervical central stenosis (CCS) is thickened change of cervical ligament flavum (CLF). The association of a morphological parameter called cervical ligament flavum thickness (CLFT) with CCS has not been reported yet. Thus, the purpose of this research was to investigate the relationship between CCS and CFJT.Data were obtained from 88 patients with CCS. A total of 87 normal controls also underwent cervical spine magnetic resonance imaging (CSMRI). All subjects underwent axial T2-weighted CSMRI. Using our picture archiving and communications system, thickness of ligament flavum of the cervical spine at C6/7 level was analyzed.The mean CLFT was 1.41 ± 0.24 mm in normal subjects and 2.09 ± 0.39 mm in patients with CCS. The CCS group was found to have significantly (P < .001) higher rate of CLFT than normal subjects. ROC curves were used to assess the usefulness of CLFT as a predictor of CCS. In the CCS group, the best practical cut off-point of CLFT was 1.71 mm (sensitivity = 90.9%; specificity = 90.8%), with AUC of 0.94 (95% confidence interval: 0.90--0.98).Greater CLFT values were associated with greater possibility of CCS. Thus, treating physician should carefully examine CLFT, as it can help diagnose CCS.

Analysis of biochar-mortar composite as a humidity control material to improve the building energy and hygrothermal performance

This study suggests a new perspective of biochar as a building material that improve not only for the strength but also hygrothermal properties. Biochar has a high porosity and surface area created by pyrolysis. It can be suitably used as a porous material because porous materials are used by incorporating into building materials for improving hygrothermal performance in the construction sector. To analyze whether biochar can be used as a functional building material to improve the hygrothermal performance, two types of biochar, made from oilseed rape (OSB) and mixed softwood (SWB), were prepared. A biochar-mortar composite was prepared according to the mixing ratio of the biochar from 2 wt% to 8 wt%, and the compressive strength and hygrothermal performance of them were analyzed. The compressive strength is the highest when 4 wt% of biochar into the mortar was mixed regardless of the type of biochar. Thermal conductivity of biochar-mortar composites was decreased as the biochar addition increased, and the value of biochar-mortar composites with 8 wt% OSB decreases by maximum 57.6% compared to the conventional cement mortar. The water vapor resistance factor of biochar-mortar composites increases, and biochar-mortar composites with 8 wt% SWB increases by maximum 50.9% compared to the reference. WUFI simulation shows that the biochar-mortar composites can contribute to a humidity control and no mold growth. The biochar-mortar composites can also contribute to energy savings although the amount of savings is insignificant. As a result, this study proved that when the mortar with biochar addition was possible to improve not only strength but also hygrothermal properties of mortar. This approach will be a new perspective that biochar can apply to the building material in practice.

Pilot Clinical Trial of Perioperative Durvalumab and Tremelimumab in the Treatment of Resectable Colorectal Cancer Liver Metastases

PURPOSE

Despite the prognostic importance of immune infiltrate in colorectal cancer, immunotherapy has demonstrated limited clinical activity in refractory metastatic proficient mismatch-repair (pMMR) colorectal cancer. This study explores combining anti-CTLA-4 and an anti-PD-L1 therapy in the preoperative management of resectable colorectal cancer liver metastases with the intent to improve immune responses in this disease setting.

PATIENTS AND METHODS

Patients with resectable colorectal cancer liver-only metastases received one dose of tremelimumab and durvalumab preoperatively followed by single-agent durvalumab postoperatively. Primary objectives were to determine feasibility and safety.

RESULTS

A total of 24 patients were enrolled between November 2016 and November 2019. Twenty-three patients received treatment [21 pMMR and 2 deficient mismatch-repair (dMMR)] and subsequently 17 (74%; 95% CI: 53%-88%) underwent surgical resection. Grade 3/4 treatment-related immune toxicity and postoperative grade 3/4 toxicity were seen in 5/23 (22%; 95% CI: 10%-44%) and 2/17 (12%; 95% CI: 2%-38%) patients. The median relapse-free survival (RFS) was 9.7 (95% CI: 8.1-17.8) months, and overall survival was 24.5 (95% CI: 16.5-28.4) months. Four patients demonstrated complete pathologic response, two dMMR patients and two POLE mutation patients. Pre- and post-tumor tissue analysis by flow cytometry, immunofluorescence, and RNA sequencing revealed similar levels of T-cell infiltration, but did demonstrate evidence of CD8⁺ and CD4⁺ activation posttreatment. An increase in B-cell transcriptome signature and B-cell density was present in posttreatment samples from patients with prolonged RFS.

CONCLUSIONS

This study demonstrates the safety of neoadjuvant combination tremelimumab and durvalumab prior to colorectal cancer liver resection. Evidence for T- and B-cell activation following this therapy was seen in pMMR metastatic colorectal cancer.

The role of the iliotibial band cross-sectional area as a morphological parameter of the iliotibial band friction syndrome: a retrospective pilot study

Background

Iliotibial band friction syndrome (ITBFS) is a common disorder of the lateral knee. Previous research has reported that the iliotibial band (ITB) thickness (ITBT) is correlated with ITBFS, and ITBT has been considered to be a key morphologic parameter of ITBFS. However, the thickness is different from inflammatory hypertrophy. Thus, we made the ITB cross-sectional area (ITBCSA) a new morphological parameter to assess ITBFS.

Methods

Forty-three patients with ITBFS group and from 43 normal group who underwent T1W magnetic resonance imaging were enrolled. The ITBCSA was measured as the cross-sectional area of the ITB that was most hypertrophied in the magnetic resonance axial images. The ITBT was measured as the thickest site of ITB.

Results

The mean ITBCSA was 25.24 ± 6.59 mm² in the normal group and 38.75 ± 9.11 mm² in the ITBFS group. The mean ITBT was 1.94 ± 0.41 mm in the normal group and 2.62 ± 0.46 mm in the ITBFS group. Patients in ITBFS group had significantly higher ITBCSA (P < 0.001) and ITBT (P < 0.001) than the normal group. A receiver operator characteristic curve analysis demonstrated that the best cut-off value of the ITBT was 2.29 mm, with 76.7% sensitivity, 79.1% specificity, and area under the curve (AUC) 0.88. The optimal cut-off score of the ITBCSA was 30.66 mm², with 79.1% sensitivity, 79.1% specificity, and AUC 0.87.

Conclusions

ITBCSA is a new and sensitive morphological parameter for diagnosing ITBFS, and may even be more accurate than ITBT.

Comparison of Intracuff Pressure and Postoperative Sore Throat Following Use of Laryngeal Mask Airway Protector With or Without Nitrous Oxide Anesthesia

PURPOSE

In general anesthesia, the laryngeal mask airway (LMA) is a frequently used effective option. The effect of nitrous oxide on intracuff pressure of the LMA and postoperative sore throat is well known; however, there are no studies related to the second-generation LMA Protector. The purpose of this study was to determine the differences in intracuff pressure and postoperative sore throat, depending on the use of nitrous oxide during general anesthesia using the LMA Protector.

DESIGN

This randomized double-blind prospective study was conducted among 88 patients aged 20 to 70 years.

METHODS

The cuff pressure started with a baseline of 40 cm H₂O and was measured using a digital cuff pressure manometer for 30 minutes. Postoperative sore throat, dysphonia, dysphagia, and numeric rating scale scores were also recorded.

FINDINGS

Over time, the intracuff pressure of the nitrous oxide group increased significantly compared with that of the air group. Furthermore, postoperative sore throat and pharyngolaryngeal complications were not significantly different between the two groups.

CONCLUSIONS

Intracuff pressure of the LMA Protector increased during anesthesia using nitrous oxide. When the anesthesia time was less than 2 hours, however, there was no difference in postoperative sore throat.

Thermal, hygric, and environmental performance evaluation of thermal insulation materials for their sustainable utilization in buildings

As energy use in the building sector is increasing worldwide, building materials with characteristics that save energy are becoming increasingly important; in addition, there is an emerging need for high-performance insulation materials with low thermal conductivity. However, thermal insulation should consider thermal conductivity, which is the main performance parameter, in addition to the water adsorption rate, acidity, and deformation and expansion due to drying conditions. This study evaluated the main performance of 21 insulation materials used at construction sites to objectively and clearly evaluate their overall performance, including their thermal conductivity. Thermal conductivity was measured by the heat flow meter method according to ASTM C518 and ISO 8301 standards; it was also evaluated according to the drying conditions. The water absorption rate was evaluated by ISO 2896 to ensure the sustainability and long-term thermal conductivity performance of the material. Acidity was evaluated with ASTM E861 to reduce the environmental load of the buildings and soil. The results of this study reviewed an appropriate method to measure the main performance according to the type of insulation.

Prediction of suspicious ankle instability using the calcaneofibular ligament cross-sectional area

Background

An injured calcaneofibular ligament (CFL) is a major cause of ankle instability (AI). Previous research has demonstrated that the thickness of the calcaneofibular ligament (CFLT) is correlated with higher-grade sprains and ankle instability. However, inflammatory hypertrophy is distinct from ligament thickness; accordingly, we considered that the calcaneofibular ligament cross-sectional area (CFLCSA) as a potential morphological parameter to analyze inflammatory CFL. We hypothesized that the CFLCSA was a key morphologic parameter in AI diagnosis.

Methods

We gathered the CFL data of 26 AI patients and 25 control subjects who had undergone ankle magnetic resonance imaging (A-MRI), and it had revealed no evidence of AI. Ankle level T1-weighted coronal A-MRI images were acquired. Using our image analysis program (INFINITT PACS), we analyzed the CFLT and CFLCSA at the CFL on the A-MRI. The CFLCSA was measured as the whole ligament cross-sectional area of the CFL that was most hypertrophied in the transverse A-MR images. The CFLT was measured at the thickest level of CFL.

Results

The mean CFLT was 3.49±0.82 mm in the control group, and 4.82±0.76 mm in the AI group. The mean CFLCSA was 33.31±7.02 mm² in the control group, and 65.33±20.91 mm² in the AI group. The AI patients had significantly greater CFLT (P<0.001) and CFLCSA (P<0.001) than the control group participants. A receiver operating characteristic (ROC) curve analysis in the evaluation of the diagnostic tests showed that the optimal cut-off score of the CFLT was 4.06 mm, with 76.9% sensitivity, 76.0% specificity, and an area under the curve (AUC) of 0.89 (95% CI, 0.79-0.99). The optimal cut-off threshold of the CFLCSA was 43.85 mm², with 92.3% sensitivity, 92.0% specificity, and AUC of 0.94 (95% CI, 0.86-1.00).

Conclusions

Even though the CFLT and CFLCSA were both significantly associated with AI, the CFLCSA was a more sensitive diagnostic test.

Evaluation of hygrothermal performance of wood-derived biocomposite with biochar in response to climate change

Wood is a sustainable resource and building material. It provides an excellent response to climate change and has excellent insulation performance. However, structural defects may occur due to decay from moisture, resulting in poor dimensional stability. The rich organic substances contained in wood can lead to mold when the moisture content is consistently high, adversely affecting the health of occupants. Therefore, we attempted to compensate for the disadvantages of wood in regard to water stability while maintaining the high thermal insulation performance and carbon dioxide storage capacity, using biochar from thermally decomposed spruce under oxygen limiting conditions. A wood-derived biocomposite was prepared by mixing biochar and soft wood-based chips using the hot-press method, and the thermal conductivity, specific heat, water vapor resistance factor, moisture adsorption, and moisture desorption performances were analyzed. The thermal conductivity of WB10 with 10 wt% biochar content was 0.09301 W/mK. This is a 7.98% decrease from 0.10108 W/mK, the thermal conductivity of WB0 without biochar. The water vapor resistance factor tended to increase when the biochar ratio increased. As the proportion of biochar increased, the equilibrium moisture content in high relative humidity tended to decrease, and it was found that the moisture adsorption and desorption performances were affected by the ratio of the biochar. Therefore, wood-derived biocomposites using biochar can be used in environmentally friendly materials, with improved thermal insulation performance and water stability.

Evaluation of environmental impact on the formaldehyde emission and flame-retardant performance of thermal insulation materials

Thermal insulation material, an essential building material, is used to preserve heat or block heat gains in buildings. Insulation material is currently attracting significant attention, and thermal conductivity, i.e., thermal insulation performance, is expressed at a very low value. Therefore, since the era of industrialization, several chemicals have been used to secure thermal insulation performance in each sector; therefore, the resulting hazards have increased. To date, researches have been mainly conducted to secure the low thermal conductivity of insulating material; however, the hazards remain unaddressed. Therefore, this study quantitatively evaluates 18 building construction products and the emission of pollutants and harmful gas during combustion events. Pollutant emission was conducted using the 20-L small chamber method according to the ISO 16000, and formaldehyde, total volatile organic compounds, and five volatile organic compounds were analyzed. Gas hazard evaluation during combustion was evaluated by KS F 2271: Fire Retardant Testing Method of Interior Finishes and Structures as the average behavioral stop time of rats under thermal insulation combustion conditions.

Enhancement of Lipid Production under Heterotrophic Conditions by Overexpression of an Endogenous bZIP Transcription Factor in Chlorella sp. HS2

Transcription factor engineering to regulate multiple genes has shown promise in the field of microalgae genetic engineering. Here, we report the first use of transcription factor engineering in Chlorella sp. HS2, thought to have potential for producing biofuels and bioproducts. We identified seven endogenous bZIP transcription factors in Chlorella sp. HS2 and named them HSbZIP1 through HSbZIP7. We overexpressed HSbZIP1, a C-type bZIP transcription factor, in Chlorella sp. HS2 with the goal of enhancing lipid production. Phenotype screening under heterotrophic conditions showed that all transformants exhibited increased fatty acid production. In particular, HSbZIP1 37 and 58 showed fatty acid methyl ester (FAME) yields of 859 and 1,052 mg/l, respectively, at day 10 of growth under heterotrophic conditions, and these yields were 74% and 113% higher, respectively, than that of WT. To elucidate the mechanism underlying the improved phenotypes, we identified candidate HSbZIP1-regulated genes via transcription factor binding site analysis. We then selected three genes involved in fatty acid synthesis and investigated mRNA expression levels of the genes by qRTPCR. The result revealed that the possible HSbZIP1-regulated genes involved in fatty acid synthesis were upregulated in the HSbZIP1 transformants. Taken together, our results demonstrate that HSbZIP1 can be utilized to improve lipid production in Chlorella sp. HS2 under heterotrophic conditions.

The predictive role of the posterior tibial tendon cross-sectional area in early diagnosing posterior tibial tendon dysfunction

A hypertrophied posterior tibial tendon (PTT) has been considered to be an important morphologic parameter of PTT dysfunction (PTTD). Previous research has demonstrated that the PTT thickness (PTTT) is correlated with early signs of PTTD. However, the thickness is different from hypertrophy. Thus, we devised the PTT cross-sectional area (PTTCSA) as a new predictive parameter for diagnosing the PTTD.The PTT data were acquired from 14 patients with PTTD and from 20 normal individuals who underwent ankle magnetic resonance imaging. We measured the PTTT and PTTCSA at the PTT on the ankle magnetic resonance imaging.The mean PTTT was 2.43 ± 0.39 mm in the normal group and 3.40 ± 0.42 mm in the PTTD group. The average PTTCSA was 16.10 ± 4.27 mm in the normal group and 26.93 ± 4.38 mm in the PTTD group. The receiver operator characteristic analysis curve demonstrated that the highest predictive value of the PTTT was 3.07 mm, with 85.7% sensitivity, 85.0% specificity. The highest predictive value of the PTTCSA was 22.54 mm, with 92.9% sensitivity, 90.0% specificity.Our findings suggest that the PTTCSA was a more valid predictor of PTTD, even though the PTTT and PTTCSA were both significantly associated with PTTD.

Circular reutilization of coffee waste for sound absorbing panels: A perspective on material recycling

The increase in coffee consumption has led to increased production of coffee waste. Methods to recycle coffee waste are constantly being researched. Coffee powder is a porous material that can effectively be used to absorb sound. In this study, sound-absorbing panels were developed using coffee waste combined with resin. A sound absorption characterization of the new material was performed. Then, the noise reduction potential using coffee-waste sound absorbers was investigated in cafés. A café has several noise sources, such as coffee machines, music, and the voices of people. The noise reduction effect was evaluated using the ODEON simulation software together with the improvement in both the clarity and reverberation time in a case study café. In the investigated room, the acoustic definition (D50) increased up to 0.8, while the reverberation time (RT) reduced to 0.6 s. The results of this study demonstrate that the noise generated in the café was reduced by recycling the coffee waste produced as a by-product in the same building. Finally, this study presents a new construction material manufactured through coffee waste that is in turn applied to cafés where the coffee waste itself is produced.

Optimal Cut-Off Value of the Coracohumeral Ligament Area as a Morphological Parameter to Confirm Frozen Shoulder

BACKGROUND

Thickened coracohumeral ligament (CHL) is one of the important morphological changes of frozen shoulder (FS). Previous research reported that coracohumeral ligament thickness (CHLT) is correlated with anterior glenohumeral instability, rotator interval and eventually FS. However, thickness may change depending on the cutting angle, and measurement point. To reduce measurement mistakes, we devised a new imaging criteria, called the coracohumeral ligament area (CHLA).

METHODS

CHL data were collected and analyzed from 52 patients with FS, and from 51 control subjects (no evidence of FS). Shoulder magnetic resonance imaging was performed in all subjects. We investigated the CHLT and CHLA at the maximal thickened view of the CHL using our picture archiving and communications system. The CHLA was measured as the whole area of the CHL including the most hypertrophied part of the MR images on the oblique sagittal plane. The CHLT was measured at the thickest point of the CHL.

RESULTS

The average CHLA was 40.88 ± 12.53 mm² in the control group and 67.47 ± 19.88 mm² in the FS group. The mean CHLT was 2.84 ± 0.67 mm in the control group and 4.01 ± 1.11 mm in the FS group. FS patients had significantly higher CHLA (P < 0.01) and CHLT (P < 0.01) than the control group. The receiver operator characteristic analysis showed that the most suitable cut-off score of the CHLA was 50.01 mm², with 76.9% sensitivity, 76.5% specificity, and area under the curve (AUC) of 0.87. The most suitable cut-off value of the CHLT was 3.30 mm, with 71.2% sensitivity, 70.6% specificity, and AUC of 0.81.

CONCLUSION

The significantly positive correlation between the CHLA, CHLT and FS was found. We also demonstrate that the CHLA has statistically equivalent power to CHLT. Thus, for diagnosis of FS, the treating physician can refer to CHLA as well as CHLT.

The role of the anterior talofibular ligament area as a morphological parameter of the chronic ankle sprain

BACKGROUND

Repetitive microtrauma can result in a hypertrophied ATFL. Previous studies have found that the anterior talofibular ligament thickness (ATFLT) is correlated with lateral ankle sprains, ligament injuries and chronic stroke in patients, and thickened anterior talofibular ligament (ATFL) has been considered to be a major morphologic parameter of hypertrophied ATFL. However, hypertrophy is different from thickness. Thus, we devised the anterior talofibular ligament area (ATFLA) as a new morphological parameter to evaluate the hypertrophy of the whole ATFL.

METHODS

ATFL samples were collected from 53 patients with sprain group and from 50 control subjects who underwent magnetic resonance imaging (MRI) of the ankle and revealed no evidence of lateral ankle injury. Axial T1-weighted MRI images were collected at the ankle level from all subjects. We measured the ATFLA and ATFLT at the anterior margin of the fibular malleolus to the talus bone on the MRI using a picture archiving and communications system. The ATFLA was measured as the whole cross-sectional ligament area of the ATFL that was most hypertrophied in the axial MR images. The ATFLT was measured as the thickest point between the lateral malleolus and the talus of the ankle.

RESULTS

The average ATFLA was 25.0 ± 6.0 mm² in the control group and 47.1 ± 10.4 mm² in the sprain group. The average ATFLT was 2.3 ± 0.6 mm in the control group and 3.8 ± 0.6 mm in the hypertrophied group. Patients in sprain group had significantly greater ATFLA (p < 0.001) and ATFLT (p < 0.001) than the control subjects. A Receiver Operator Characteristics curve analysis showed that the best cut-off point of the ATFLA was 34.8 mm², with 94.3% sensitivity, 94.0% specificity, and an AUC of 0.97 (95% CI, 0.94-1.00). The optimal cut-off point of the ATFLT was 3.1 mm, with 86.8% sensitivity, 86.0% specificity, and AUC of 0.95 (95% CI, 0.92-0.99).

CONCLUSION

ATFLA is a new morphological parameter for evaluating chronic ankle sprain, and may even be more sensitive than ATFLT.

Evaluation of the cross-sectional area of acromion process for shoulder impingement syndrome

Background

Anatomic changes in the acromion have been considered a main cause of shoulder impingement syndrome (SIS). To evaluate the relationship between SIS and the acromion process, we devised a new morphological parameter called the acromion process cross-sectional area (APA). We hypothesized that the APA could be an important morphologic diagnostic parameter in SIS.

Methods

We collected APA data from 95 patients with SIS and 126 control subjects who underwent shoulder magnetic resonance imaging (MRI). Then we measured the maximal cross-sectional area of the bone margin of the acromion process on MRI scans.

Results

The mean of APAs were 136.50 ± 21.75 mm² in the male control group and 202.91 ± 31.78 mm² in the male SIS group; SIS patients had significantly greater APAs (P < 0.001). The average of APAs were 105.38 ± 19.07 mm² in the female control group and 147.62 ± 22.90 mm² in the female SIS group, and the SIS patients had significantly greater APAs (P < 0.001). The optimal APA cut-off in the male group was 165.14 mm² with 90.2% sensitivity, 91.4% specificity, and an area under the curve (AUC) of 0.968. In the female group, the optimal cut-off was 122.50 mm² with 85.2% sensitivity, 84.9% specificity, and an AUC of 0.928.

Conclusions

The newly devised APA is a sensitive parameter for assessing SIS; greater APA is associated with a higher possibility of SIS. We think that this result will be helpful for the diagnosis of SIS.

The prognostic value of median nerve thickness in diagnosing carpal tunnel syndrome using magnetic resonance imaging: a pilot study

Background

The median nerve cross-sectional area (MNCSA) is a useful morphological parameter for the evaluation of carpal tunnel syndrome (CTS). However, there have been limited studies investigating the anatomical basis of median nerve flattening. Thus, to evaluate the connection between median nerve flattening and CTS, we carried out a measurement of the median nerve thickness (MNT).

Methods

Both MNCSA and MNT measurement tools were collected from 20 patients with CTS, and from 20 control individuals who underwent carpal tunnel magnetic resonance imaging (CTMRI). We measured the MNCSA and MNT at the level of the hook of hamate on CTMRI. The MNCSA was measured on the transverse angled sections through the whole area. The MNT was measured based on the most compressed MNT.

Results

The mean MNCSA was 9.01 ± 1.94 mm² in the control group and 6.58 ± 1.75 mm² in the CTS group. The mean MNT was 2.18 ± 0.39 mm in the control group and 1.43 ± 0.28 mm in the CTS group. Receiver operating characteristics curve analysis demonstrated that the optimal cut-off value for the MNCSA was 7.72 mm², with 75.0% sensitivity, 75.0% specificity, and an area under the curve (AUC) of 0.82 (95% confidence interval [CI], 0.69-0.95). The best cut off-threshold of the MNT was 1.76 mm, with 85% sensitivity, 85% specificity, and an AUC of 0.94 (95% CI, 0.87-1.00).

Conclusions

Even though both MNCSA and MNT were significantly associated with CTS, MNT was identified as a more suitable measurement parameter.

Combining Immune Checkpoint Blockade and Tumor-Specific Vaccine for Patients With Incurable Human Papillomavirus 16-Related Cancer: A Phase 2 Clinical Trial

Importance

In recurrent human papilloma virus (HPV)-driven cancer, immune checkpoint blockade with anti-programmed cell death 1 (PD-1) antibodies produces tumor regression in only a minority of patients. Therapeutic HPV vaccines have produced strong immune responses to HPV-16, but vaccination alone has been ineffective for invasive cancer.

Objective

To determine whether the efficacy of nivolumab, an anti-PD-1 immune checkpoint antibody, is amplified through treatment with ISA 101, a synthetic long-peptide HPV-16 vaccine inducing HPV-specific T cells, in patients with incurable HPV-16-positive cancer.

Design, Setting, and Participants

In this single-arm, single-center phase 2 clinical trial, 24 patients with incurable HPV-16-positive cancer were enrolled from December 23, 2015, to December 12, 2016. Duration of follow-up for censored patients was 12.2 months through August 31, 2017.

Interventions

The vaccine ISA101, 100 μg/peptide, was given subcutaneously on days 1, 22, and 50. Nivolumab, 3 mg/kg, was given intravenously every 2 weeks beginning day 8 for up to 1 year.

Main Outcomes and Measures

Assessment of efficacy reflected in the overall response rate (per Response Evaluation Criteria in Solid Tumors, version 1.1).

Results

Of the 24 patients (4 women and 20 men; 22 with oropharyngeal cancer; median age, 60 years [range, 36-73 years]), the overall response rate was 33% (8 patients; 90% CI, 19%-50%). Median duration of response was 10.3 months (95% CI, 10.3 months to inestimable). Five of 8 patients remain in response. Median progression-free survival was 2.7 months (95% CI, 2.5-9.4 months). Median overall survival was 17.5 months (95% CI, 17.5 months to inestimable). Grades 3 to 4 toxicity occurred in 2 patients (asymptomatic grade 3 transaminase level elevation in 1 patient and grade 4 lipase elevation in 1 patient), requiring discontinuation of nivolumab therapy.

Conclusions and Relevance

The overall response rate of 33% and median overall survival of 17.5 months is promising compared with PD-1 inhibition alone in similar patients. A randomized clinical trial to confirm the contribution of HPV-16 vaccination to tumoricidal effects of PD-1 inhibition is warranted for further study.

Trial Registration

ClinicalTrials.gov identifier: NCT02426892.

A Critical Role of PCSK9 in Mediating IL-17-Producing T Cell Responses in Hyperlipidemia

We previously demonstrated that atherogenic Ldlr ^-/- Apobec1 ^-/- (LDb) double knockout mice lacking both low-density lipoprotein receptor (LDLR) and apolipoprotein B mRNA-editing catalytic polypeptide-1 (Apobec1) had increased serum IL-17 levels, with T cell programming shifted towards Th17 cells. In this study, we assessed the role of proprotein convertase subtilisin/kexin type 9 (PCSK9) in T cell programming and atherogenesis. We deleted the Pcsk9 gene from LDb mice to generate Ldlr ^-/- Apobec1 ^-/- Pcsk9 ^-/- (LTp) triple knockout mice. Atherosclerosis in the aortic sinus and aorta were quantitated. Lymphoid cells were analyzed by flow cytometry, ELISA and real-time PCR. Despite of dyslipidemia, LTp mice developed barely detectable atherosclerotic lesions. The IL-17, was very low in plasma and barely detectable in the aortic sinus in the LTp mice. In the spleen, the number of CD4⁺CD8^- cells and splenocytes were much lower in the LDb mice than LTp mice, whereas, the IL-17-producing cells of γδTCR⁺ T cells and effector memory CD4⁺ T cells (CD44^hiCD4⁺) in the spleen were significantly higher in the LDb mice than in the LTp mice. The Rorc mRNA expression levels were elevated in LDb mice compared to LTp mice. When re-stimulated with an anti-CD3 Ab, CD44^hiCD4⁺ T cells from LDb mice secreted more IL-17 than those from LTp mice. T cells from LDb mice (with PCSK9) produce more IL-17 at basal and stimulated conditions when compared with LTp mice (without PCSK9). Despite the dyslipidemic profile and the lack of LDLR, atherogenesis is markedly reduced in LTp mice. These results suggest that PCSK9 is associated with changes in T cell programming that contributes to the development of atherosclerosis.