Experimental Limits on Solar Reflected Dark Matter with a New Approach on Accelerated-Dark-Matter-Electron Analysis in Semiconductors

Recently a dark matter-electron (DM-electron) paradigm has drawn much attention. Models beyond the standard halo model describing DM accelerated by high energy celestial bodies are under intense examination as well. In this Letter, a velocity components analysis (VCA) method dedicated to swift analysis of accelerated DM-electron interactions via semiconductor detectors is proposed and the first HPGe detector-based accelerated DM-electron analysis is realized. Utilizing the method, the first germanium based constraint on sub-GeV solar reflected DM-electron interaction is presented with the 205.4  kg·day dataset from the CDEX-10 experiment. In the heavy mediator scenario, our result excels in the mass range of 5-15  keV/c^{2}, achieving a 3 orders of magnitude improvement comparing with previous semiconductor experiments. In the light mediator scenario, the strongest laboratory constraint for DM lighter than 0.1  MeV/c^{2} is presented. The result proves the feasibility and demonstrates the vast potential of the VCA technique in future accelerated DM-electron analyses with semiconductor detectors.

[Zinc finger protein-36 deficiency inhibits osteogenic differentiation of mouse bone marrow-derived mesenchymal stem cells and preosteoblasts by activating the ERK/MAPK pathway]

OBJECTIVE

To explore the role of zinc finger protein 36(ZFP36) in regulating osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) and preosteoblasts.

METHODS

ZFP36 expression was observed in primary mouse BMSCs and mouse preosteoblasts (MC3T3-E1 cells) during induced osteogenic differentiation. Zfp36-deficient cell models were constructed in the two cells using RNA interference technique and the changes in differentiation capacities of the transfected cells into osteoblasts were observed. Transcriptome sequencing was used to investigate the potential mechanisms of ZFP36 for regulating osteoblast differentiation of the two cells. U0126, a ERK/MAPK signal suppressor, was used to verify the regulatory mechanism of Zfp36 in osteogenic differentiation of Zfp36-deficient cells.

RESULTS

During the 14-day induction of osteogenic differentiation, both mouse BMSCs and MC3T3-E1 cells exhibited increased expression of ZFP36, and its mRNA expression reached the peak level on Day 7(P < 0.0001). The Zfp36-deficient cell models showed reduced intensity of alkaline phosphatase (ALP) staining and alizarin red staining with significantly lowered expressions of the osteogenic marker genes including Alpl, Sp7, Bglap and Ibsp (P < 0.01). Transcriptome sequencing verified the reduction of bone mineralization-related gene expressions in Zfp36-deficient cells and indicated the involvement of ERK signaling in the potential regulatory mechanism of Zfp36. Immunoblotting showed that pERK protein expression increased significantly in Zfp36-deficient cells compared with the control cells. In Zfp36-deficient MC3T3-E1 cells, inhibition of activated ERK/MAPK signaling with U0126 resulted in obviously enhanced ALP staining and significantly increased expressions of osteoblast differentiation markers Runx2 and Bglap (P < 0.05).

CONCLUSIONS

ZFP36 is involved in the regulation of osteoblast differentiation of mouse BMSCs and preosteoblasts, and ZFP36 deficiency causes inhibition of osteoblast differentiation of the cells by activating the ERK/MAPK signaling pathway.

Alkylammonium Halides for Phase Regulation and Luminescence Modulation of Cesium Copper Iodide Nanocrystals for Light-Emitting Diodes

All-inorganic cesium copper halide nanocrystals have attracted extensive attention due to their cost-effectiveness, low toxicity, and rich luminescence properties. However, controlling the synthesis of these nanocrystals to achieve a precise composition and high luminous efficiency remains a challenge that limits their future application. Herein, we report the effect of oleylammonium iodide on the synthesis of copper halide nanocrystals to control the composition and phase and modulate their photoluminescence (PL) quantum yields (QYs). For CsCu2I3, the PL peak is centered at 560 nm with a PLQY of 47.3%, while the PL peak of Cs3Cu2I5 is located at 440 nm with an unprecedently high PLQY of 95.3%. Furthermore, the intermediate-state CsCu2I3/Cs3Cu2I5 heterostructure shows white light emission with a PLQY of 66.4%, chromaticity coordinates of (0.3176, 0.3306), a high color rendering index (CRI) of 90, and a correlated color temperature (CCT) of 6234 K, indicating that it is promising for single-component white-light-emitting applications. The nanocrystals reported in this study have excellent luminescence properties, low toxicity, and superior stability, so they are more suitable for future light-emitting applications.

RGB tri-luminescence in organic-inorganic zirconium halide perovskites

Materials with two or more fluorescence features under different excitation sources have great potential in optical applications, but luminous materials with three emission characteristics have been largely undeveloped. Here, we report a novel zero-dimensional (0D) organic-inorganic hybrid ((C2H5)4N)2ZrCl6 perovskite with multiple emissions. The zirconium-based perovskite exhibits a red emission around 620 nm, a green emission at 527 nm, and a blue emission around 500 nm. The red and green emissions come from self-trapped excitons (STEs) and the d-d transitions of Zr(iv), respectively, which are caused by distortion of the [ZrCl6]2- octahedra. The blue emission is caused by thermally activated delayed fluorescence (TADF), which is similar to that of Cs2ZrCl6. The absolute photoluminescence quantum yield (PLQY) of the red and blue double emission is up to 83% and the PLQY of the green emission is 27%. With different combinations of ((C2H5)4N)2ZrCl6 samples, we achieve a variety of applications, including a two-color luminescent anti-counterfeiting device, a white light-emitting diode (WLED) with a color rendering index (CRI) of 95 and information encryption with different excitations. We also synthesize other hybrid zirconium perovskites with tri-luminescence through a similar method. Our work provides a potential set of excitation-dependent luminescent materials and is expected to expand the basic research and practical applications of multi-luminescence materials.

Bioinspired, vertically stacked, and perovskite nanocrystal-enhanced CMOS imaging sensors for resolving UV spectral signatures

Imaging and identifying target signatures and biomedical markers in the ultraviolet (UV) spectrum is broadly important to medical imaging, military target tracking, remote sensing, and industrial automation. However, current silicon-based imaging sensors are fundamentally limited because of the rapid absorption and attenuation of UV light, hindering their ability to resolve UV spectral signatures. Here, we present a bioinspired imaging sensor capable of wavelength-resolved imaging in the UV range. Inspired by the UV-sensitive visual system of the Papilio xuthus butterfly, the sensor monolithically combines vertically stacked photodiodes and perovskite nanocrystals. This imaging design combines two complementary UV detection mechanisms: The nanocrystal layer converts a portion of UV signals into visible fluorescence, detected by the photodiode array, while the remaining UV light is detected by the top photodiode. Our label-free UV fluorescence imaging data from aromatic amino acids and cancer/normal cells enables real-time differentiation of these biomedical materials with 99% confidence.

Solid-state synthesis of cesium manganese halide nanocrystals in glass with bright and broad red emission for white LEDs

Recently, lead halide perovskite nanocrystals (NCs) have attracted extensive attention due to their unique optical properties. However, the toxicity of lead and the instability to moisture obstruct their further commercial development. Herein, a series of lead-free CsMnX₃ (X = Cl, Br, and I) NCs embedded in glasses were synthesized by a high temperature solid-state chemistry method. These NCs embedded in glass can remain stable after soaking in water for 90 days. It is found that increasing the amount of cesium carbonate in the synthesis process can not only prevent the oxidation of Mn²⁺ to Mn³⁺ and promote the transparency of glass in the 450-700 nm region, but also significantly increase its photoluminescence quantum yield (PLQY) from 2.9% to 65.1%, which is the highest reported value of the red CsMnX₃ NCs so far. Using CsMnBr₃ NCs with a red emission peak at 649 nm and full-width-at-half-maximum (FWHM) of 130 nm as the red light source, a white light-emitting diode (LED) device with International Commission on illumination (CIE) coordinates of (0.33, 0.36) and a color rendering index (CRI) of 94 was obtained. These findings, together with future research, are likely to yield stable and bright lead-free NCs for the next generation of solid-state lighting.

[Overexpression of miR-431-5p impairs mitochondrial function and induces apoptosis in gastric cancer cells via the Bax/Bcl-2/caspase3 pathway]

OBJECTIVE

To investigate the expression of microRNA miR-431-5p in gastric cancer (GC) tissues and its effects on apoptosis and mitochondrial function in GC cells.

METHODS

The expression level of miR-431-5p in 50 clinical samples of GC tissues and paired adjacent tissues was detected using real-time fluorescence quantitative PCR, and its correlation with the clinicopathological features of the patients was analyzed. A cultured human GC cell line (MKN-45 cells) were transfected with a miR-431-5p mimic or a negative control sequence, and the cell proliferation, apoptosis, mitochondrial number, mitochondrial potential, mitochondrial permeability transition pore (mPTP), reactive oxygen species (ROS) production and adenosine triphosphate (ATP) content were detected using CCK-8 assay, flow cytometry, fluorescent probe label, or ATP detection kit. The changes in the expression levels of the apoptotic proteins in the cells were detected with Western blotting.

RESULTS

The expression level of miR-431-5p was significantly lower in GC tissues than in the adjacent tissues (P < 0.001) and was significantly correlated with tumor differentiation (P=0.0227), T stage (P=0.0184), N stage (P=0.0005), TNM stage (P=0.0414) and vascular invasion (P=0.0107). In MKN-45 cells, overexpression of miR-431-5p obviously inhibited cell proliferation and induced cell apoptosis, causing also mitochondrial function impairment as shown by reduced mitochondrial number, lowered mitochondrial potential, increased mPTP opening, increased ROS production and reduced ATP content. Overexpression of miR-431-5p significantly downregulated the expression of Bcl-2 and increased the expressions of pro-apoptotic proteins p53, Bcl-2 and cleaved caspase-3 protein.

CONCLUSION

The expression of miR-431-5p is down-regulated in GC, which results in mitochondrial function impairment and promotes cell apoptosis by activating the Bax/Bcl-2/caspase3 signaling pathway, suggesting the potential role of miR-431-5p in targeted therapy for GC.

Full-colour Jabuticaba-like nanostructures via the multiplex and orthogonal self-assembly of protein-conjugated quantum dots with engineered biofilms

The integration of inorganic components with bacterial biofilms is of great significance for expanding the functionality of artificial biological materials. However, so far, the complexities and functionalities of biofilm-based scaffolds assembled via metal-peptide coordination chemistries remain limited. Here, we present a platform for the multiplexed and specific coupling of recombinant protein-functionalized fluorescent red-green-blue (RGB) quantum dots (QDs) with engineered biofilms to form Jabuticaba-like nanostructures. Full-color living Jabuticaba-like nanostructures have been achieved through the interaction of extracellular peptides that are fabricated by biofilms with the proteins that modify the surface of the RGB QDs through orthogonal SpyTag/SpyCatcher, IsopeptagN/PilinN, and IsopeptagC/PilinC pairs. We envision that living cell populations will enable the multiplexable, scalable and bottom-up assembly of versatile materials that integrate both abiotic and biotic components into multifunctional systems.

Association of pectoralis muscle area on computed tomography with airflow limitation severity and respiratory outcomes in COPD: A population-based prospective cohort study

BACKGROUND

Previous studies have shown that patients with chronic obstructive pulmonary disease (COPD) of severe or very severe airflow limitation have a reduced pectoralis muscle area (PMA), which is associated with mortality. However, whether patients with COPD of mild or moderate airflow limitation also have a reduced PMA remains unclear. Additionally, limited evidence is available regarding the associations between PMA and respiratory symptoms, lung function, computed tomography (CT) imaging, lung function decline, and exacerbations. Therefore, we conducted this study to evaluate the presence of PMA reduction in COPD and to clarify its associations with the referred variables.

METHODS

This study was based on the subjects enrolled from July 2019 to December 2020 in the Early Chronic Obstructive Pulmonary Disease (ECOPD) study. Data including questionnaire, lung function, and CT imaging were collected. The PMA was quantified on full-inspiratory CT at the aortic arch level using predefined -50 and 90 Hounsfield unit attenuation ranges. Multivariate linear regression analyses were performed to assess the association between the PMA and airflow limitation severity, respiratory symptoms, lung function, emphysema, air trapping, and the annual decline in lung function. Cox proportional hazards analysis and Poisson regression analysis were used to evaluate the PMA and exacerbations after adjustment.

RESULTS

We included 1352 subjects at baseline (667 with normal spirometry, 685 with spirometry-defined COPD). The PMA was monotonically lower with progressive airflow limitation severity of COPD after adjusting for confounders (vs. normal spirometry; Global Initiative for Chronic Obstructive Lung Disease [GOLD] 1: β=-1.27, P=0.028; GOLD 2: β=-2.29, P<0.001; GOLD 3: β=-4.88, P<0.001; GOLD 4: β=-6.47, P=0.014). The PMA was negatively associated with the modified British Medical Research Council dyspnea scale (β=-0.005, P=0.026), COPD Assessment Test score (β=-0.06, P=0.001), emphysema (β=-0.07, P<0.001), and air trapping (β=-0.24, P<0.001) after adjustment. The PMA was positively associated with lung function (all P<0.05). Similar associations were discovered for the pectoralis major muscle area and pectoralis minor muscle area. After the 1-year follow-up, the PMA was associated with the annual decline in the post-bronchodilator forced expiratory volume in 1 s percent of predicted value (β=0.022, P=0.002) but not with the annual rate of exacerbations or the time to first exacerbation.

CONCLUSION

Patients with mild or moderate airflow limitation exhibit a reduced PMA. The PMA is associated with airflow limitation severity, respiratory symptoms, lung function, emphysema, and air trapping, suggesting that PMA measurement can assist with COPD assessment.

Luminescence Enhancement of CsMnBr3 Nanocrystals through Heterometallic Doping

The absorption and photoluminescence (PL) of CsMnBr₃ with Mn(II) in octahedral crystal fields are extremely weak due to a d-d forbidden transition. Herein, we introduce a facile and general synthetic procedure that can prepare undoped and heterometallic doped CsMnBr₃ NCs at room temperature. Importantly, both PL and absorption of CsMnBr₃ NCs were significantly improved after doping a small amount of Pb²⁺ (4.9%). The absolute photoluminescence quantum yield (PL QY) of Pb-doped CsMnBr₃ NCs is up to 41.5%, 11-fold higher than undoped CsMnBr₃ NCs (3.7%). The PL enhancement is attributed to the synergistic effects between [MnBr₆]^4- units and [PbBr₆]^4- units. Furthermore, we verified the similar synergistic effects between [MnBr₆]^4- units and [SbBr₆]^4- units in Sb-doped CsMnBr₃ NCs. Our results highlight the potential of tailoring luminescence properties of manganese halides through heterometallic doping.

Synthesis of Efficient and Stable Tetrabutylammonium Copper Halides with Dual Emissions for Warm White Light-Emitting Diodes

In order to achieve a high color-rendering index (CRI) and low correlated color temperature (CCT) indoor lighting, single-component phosphors with broad-band dual emission are in high demand for white-light-emitting diodes (WLEDs). However, phosphors with such fluorescent properties are rare at present. Herein, we report a facile solid-state chemical method for the synthesis of single-component phosphor with broad-band emission and a large Stokes shift that can meet the requirements of future white-light sources. These new tetrabutylammonium copper halides phosphors have excellent warm white emission characteristics, and their luminescence peaks are located at 494 and 654 nm. The optimized photoluminescence (PL) quantum yield can reach 93.7 %. The typical CIE coordinate of the as-fabricated WLED is at (0.3620, 0.3731) with a CRI of 89 and low CCT of 4516 K.

Ultra-small α-CsPbI3 perovskite quantum dots with stable, bright and pure red emission for Rec. 2020 display backlights

The synthesis of α-CsPbI₃ perovskite quantum dots (QDs) with pure red emission around 630 nm is in high demand for display backlight application. However, the phase transition of α-CsPbI₃ to yellow non-emitting δ-CsPbI₃ has been proven to be a great challenge for the classic colloidal synthesis route for perovskite QDs in octadecene (ODE). Herein, we report a novel colloidal synthesis route by replacing ODE with lauryl methacrylate (LMA) as the reaction solvent to improve the solubility of precursors, resulting in small sized α-CsPbI₃ QDs with a diameter of only 4.2 nm, which are the smallest red PQDs reported so far. The corresponding CsPbI₃ QD films exhibit a tunable photoluminescence (PL) emission peak in the bright pure red region of 627 to 638 nm. The CsPbI₃ QD polymer composite films with PL emission at 630 nm exhibit a superior photoluminescence quantum yield (PLQY) and photostability to mixed halide CsPbBrI₂ films under intense illumination. Perovskite light emitting diodes (LED) with the color gamut reaching 96% of the Rec. 2020 standard are achieved using these films. This study provides a high-performance pure red fluorescent material with a robust, low-cost, and reproducible colloidal chemistry that will pave the way for the adoption of perovskite QDs in display backlight application.

Surface passivation of intensely luminescent all-inorganic nanocrystals and their direct optical patterning

All-inorganic nanocrystals (NCs) are of great importance in a range of electronic devices. However, current all-inorganic NCs suffer from limitations in their optical properties, such as low fluorescence efficiencies. Here, we develop a general surface treatment strategy to obtain intensely luminescent all-inorganic NCs (ILANs) by using designed metal salts with noncoordinating anions that play a dual role in the surface treatment process: (i) removing the original organic ligands and (ii) binding to unpassivated Lewis basic sites to preserve the photoluminescent (PL) properties of the NCs. The absolute photoluminescence quantum yields (PLQYs) of red-emitting CdSe/ZnS NCs, green-emitting CdSe/CdZnSeS/ZnS NCs and blue-emitting CdZnS/ZnS NCs in polar solvents are 97%, 80% and 72%, respectively. Further study reveals that the passivated Lewis basic sites of ILANs by metal cations boost the efficiency of radiative recombination of electron-hole pairs. While the passivation of Lewis basic sites leads to a high PLQY of ILANs, the exposed Lewis acidic sites provide the possibility for in situ tuning of the functions of NCs, creating opportunities for direct optical patterning of functional NCs with high resolution.

Facile Synthesis of Highly Emissive All-Inorganic Manganese Bromide Compounds with Perovskite-Related Structures for White LEDs

Lead-free all-inorganic halide materials with different Mn²⁺-based crystal structures (Cs₃MnBr₅ and CsMnBr₃) were obtained using a convenient synthetic method. Cs₃MnBr₅ had a bright green emission (522 nm), with a unique single-exponential lifetime (τ_avg = 236 µs) and a high photoluminescence quantum yield (82 ± 5%). A red emission was observed in the case of the CsMnBr₃ structure with a two-exponential fluorescence decay curve, and the lifetime was 1.418 µs (93%) and 18.328 µs (7%), respectively. By a judicious tuning of the synthetic conditions, a mixed phase of Cs₃MnBr₅/CsMnBr₃ was also produced that emitted white light, covering almost the entire visible spectrum. White-light-emitting diodes (WLEDs) with color coordinates (0.4269, 0.4955), a color temperature of (3773 K), and a color rendering index (68) were then fabricated using the as-prepared powder of mixed phases of Cs₃MnBr₅/CsMnBr₃ with a commercial UV LED chip (365 nm).

Constraints on Sub-GeV Dark Matter-Electron Scattering from the CDEX-10 Experiment

We present improved germanium-based constraints on sub-GeV dark matter via dark matter-electron (χ-e) scattering using the 205.4  kg·day dataset from the CDEX-10 experiment. Using a novel calculation technique, we attain predicted χ-e scattering spectra observable in high-purity germanium detectors. In the heavy mediator scenario, our results achieve 3 orders of magnitude of improvement for m_{χ} larger than 80  MeV/c^{2} compared to previous germanium-based χ-e results. We also present the most stringent χ-e cross-section limit to date among experiments using solid-state detectors for m_{χ} larger than 90  MeV/c^{2} with heavy mediators and m_{χ} larger than 100  MeV/c^{2} with electric dipole coupling. The result proves the feasibility and demonstrates the vast potential of a new χ-e detection method with high-purity germanium detectors in ultralow radioactive background.

Exotic Dark Matter Search with the CDEX-10 Experiment at China's Jinping Underground Laboratory

A search for exotic dark matter (DM) in the sub-GeV mass range has been conducted using 205 kg day data taken from a p-type point contact germanium detector of the CDEX-10 experiment at China's Jinping underground laboratory. New low-mass dark matter searching channels, neutral current fermionic DM absorption (χ+A→ν+A) and DM-nucleus 3→2 scattering (χ+χ+A→ϕ+A), have been analyzed with an energy threshold of 160 eVee. No significant signal was found; thus new limits on the DM-nucleon interaction cross section are set for both models at the sub-GeV DM mass region. A cross section limit for the fermionic DM absorption is set to be 2.5×10^{-46}  cm^{2} (90% C.L.) at DM mass of 10  MeV/c^{2}. For the DM-nucleus 3→2 scattering scenario, limits are extended to DM mass of 5 and 14  MeV/c^{2} for the massless dark photon and bound DM final state, respectively.

Seroprevalence of antibodies to classical swine fever virus and porcine reproductive and respiratory syndrome virus in healthy pigs in Hunan Province, China

Classical swine fever (CSF) and porcine reproductive and respiratory syndrome (PRRS) are responsible for major economic losses and represent a threat to the swine industry worldwide. Routine surveillance serology for CSF and PRRS viruses is critical to maintaining the health status of sow farms in Hunan Province, which is one of the top pig production provinces in China. The aim of our study was to investigate the serological statistics of CSF virus (CSFV) and PRRS virus (PRRSV) in Hunan Province. The cohort serum samples were collected from vaccinated and unvaccinated pigs. Our findings showed that the average rates of CSFV and PRRSV antibody seropositivity were 82.2% (95% CI: 80.1-84.3) and 84.8% (95% CI: 82.5-87.1), respectively, in the immunized group and that these rates were higher than those in the unvaccinated group (58.6% for CSFV and 47.8% for PRRSV). Additionally, the level of CSFV antibody in piglet serum declined gradually with age, whereas PRRSV-specific antibody level increased initially (1 to 2 weeks old) and then declined with age (2 to 4 weeks old). In summary, we investigated the difference in CSFV/PRRSV antibody levels among piglets at various weeks old (1 to 4 weeks) to further establish the duration of maternal immunity in piglets. In addition, routine monitoring of CSFV/PRRSV antibodies in immunized pigs was carried out to evaluate the efficacy of vaccination.

POS0244 ASSOCIATION OF PROTEINASE 3 GENE (PRTN3) Val119Ile POLYMORPHISM (SNP rs351111) WITH RISK OF RELAPSE AMONG HOMOZYGOUS PATIENTS WITH PR3 ANCA-ASSOCIATED VASCULITIS

Background

The frequency of the proteinase 3 gene (PRTN3) polymorphisms in patients with ANCA-associated vasculitis (AAV) is not well characterized. We hypothesize that PRTN3 gene polymorphisms induce allosteric changes in PR3 conformation which may alter its interaction with ligands and PR3-ANCA during inflammation with potential implications for disease presentation and clinical outcomes.

Objectives

To analyze the association of PRTN3 Val119Ile polymorphism (SNP rs351111) with risk of relapse risk among homozygous patients with PR3 ANCA-associated vasculitis.

Methods

DNA variant calling for SNP rs351111 (chr.19:844020, c.355G>A) in PRTN3 gene assessed the allelic frequency in patients with PR3-AAV included in the Rituximab versus Cyclophosphamide (RAVE) trial. This was followed by RNA-seq variant calling to characterize the mRNA expression. We compared clinical presentation and outcomes between patients homozygous for PR3-Ile119 or PR3-Val119.

Results

Serum samples for DNA calling were available in 188 of the 197 patients with AAV in the RAVE cohort. 75 PR3-AAV patients had the allelic variant: 13 patients were homozygous for PR3-Ile119 and 62 patients were heterozygous PR3-Val119Ile with an allele frequency threshold of 29.3 – 55.1% of reads (Figure 1A and 1B). RNA-seq was available for 89 patients and the mRNA corresponding to the allelic variant was found in 35 PR3-AAV patients: 13 patients were homozygous for PR3-Ile119 and 22 patients were heterozygous PR3-Val119Ile with an allele frequency threshold of 11.1 – 62.8% of reads (Figure 1A and 1C). The agreement between the DNA calling results and the mRNA expression of the 86 patients that overlapped was 100%. We found an additional homozygous patient for PR3-Val119 in which blood was not available for DNA calling. We compared the clinical presentation and outcomes of 74 patients with PR3-AAV: 13 homozygous for PR3-Ile119 and 51 homozygous for PR3-Val119 (Table 1). The frequency of severe flares at 18 months in homozygous PR3-Ile119 was ≥ 2x higher when compared with homozygous PR3-Val119 (46.2% vs. 19.6%, p=0.048). We found no differences in clinical presentation.

Figure 1.

RAVE trial population distribution according to the zygosity status for PRTN3 gene (PR3 and MPO-ANCA patients) and DNA or RNA variant calling (panel A). Allelic frequency for rs351111, chr.19:844020 (c.355G>A) in PRTN3 among patients with AAV (PR3 and MPO-ANCA) in the DNA (panel B) and RNA (panel C) variant calling.

Table 1.

Outcomes of patients with PR3-ANCA according with PRTN3 zygosity.

PR3-ANCA (n=64)Homozygous PR3-Val119(n=51)HomozygousPR3-Ile119(n=13)p-value Remission, n (%)45 (88.2)13 (100)0.194 Complete remission, n (%)36 (70.6)10 (76.9)0.650 Any flare 18 months, n (%)30 (58.8)7 (53.8)0.746 Severe Relapse* 18 months, n (%)10 (19.6)6 (46.2)0.048

* Relapse was considered “Severe” if Birmingham Vasculitis Activity Score for Wegener’s Granulomatosis (BVAS/WG) > 3 or one major item as per the RAVE trial definition.

Abbreviations: ANCA - anti-neutrophil cytoplasmic antibody; Ile – isoleucine; n- number; PR3 - proteinase 3; Val - valine.

Conclusion

In patients with PR3-AAV the presence of PRTN3 Val119Ile polymorphism was associated with higher frequency of severe relapse. Further studies are necessary to understand the association of this observation with the risk of severe relapse.

References

[1]Stone JH et al N Engl J Med 2010; 363:221-232

Disclosure of Interests

None declared

Structural visualization of transient interactions between the cis-acting acyltransferase and acyl carrier protein of the salinomycin modular polyketide synthase

Transient protein–protein interactions between cis-acting acyltransferase (AT) and acyl carrier protein (ACP) domains are critical for the catalysis and processivity of modular polyketide synthases (mPKSs), but are challenging for structural characterization due to the intrinsically weak binding affinity. Here, a stable complex of cis-acting AT and ACP domains from the ninth module of the salinomycin mPKS was obtained using a maleimide cross-linker and the structure of the complex was determined at 2.6 Å resolution. The crystal structure shows that the AT in combination with the ketosynthase (KS)-to-AT linker forms a C-shaped architecture to embrace the ACP. The large hydrolase subdomain of the AT serves as a major binding platform for the ACP, while the small ferredoxin-like subdomain of the AT and the KS-to-AT linker cooperate with each other to constrain binding of the ACP. The importance of interface residues in cis-acting AT–ACP interactions was confirmed by mutagenesis assays. The interaction mode observed in the cis-acting AT–ACP complex is completely different from those observed in trans-acting AT–ACP complexes, where the ACP primarily contacts the small domain of the AT. The complex structure provides detailed mechanistic insights into AT–ACP recognition in cis-AT mPKSs.

Probing the seismic cycle timing with coseismic twisting of subduction margins

Assessing the timing of great megathrust earthquakes is together crucial for seismic hazard analysis and deemed impossible. Geodetic instrumentation of subduction zones has revealed unexpected deformation patterns at subduction segments adjacent to those that hosted recent mega-earthquakes: coastal sites move landward with faster velocities than before the earthquake. Here, we show observations from the largest and best-monitored megathrust earthquakes, and from a scaled analog model, to reveal that these events create coseismic and postseismic deformation patterns typical of a complete gear-like rotation about a vertical axis, hereafter called twisting. We find that such twisting alters the interseismic velocity field of adjacent subduction segments depending on the time since the last earthquake. Early interactions accelerate while late interactions decelerate local kinematics. This finding opens the possibility of using megathrust earthquakes, the characteristics of the twisting pattern, and the ensuing geodetic velocity changes, as a proxy for estimating the timing of the seismic cycle at unruptured segments along the margin.

Satellite geodesy and downscaled laboratory experiments reveal that great subduction earthquakes trigger step changes in kinematics of neighboring segments. This signal is potentially informative of the timing of the seismic cycle.

[Progress in the pathogenesis of post-infectious persistent cough]

Respiratory viral infection is a common cause of acute cough. After the cause has been cleared and the symptoms such as fever, nasal congestion and runny nose have been relieved, some patients still have persistent cough. These phenomena indicate that respiratory viruses may mediate cough hypersensitivity and lead to the occurrence of sub-acute or chronic cough. Cough response to viral infection is a protective strategy to prevent the spread of the viruses from the upper respiratory tract to other sites, but excessive coughing becomes a disease. In this review, we introduced the research progress in the pathophysiological mechanism of post-viral persistent cough or chronic cough.

Rotary table wobble error analysis and correction of a rotating accelerometer gravity gradiometer

In a rotating accelerometer gravity gradiometer (RAGG), rotary table wobble refers to the shift in the direction of the spin axis during operation. This motion causes errors in the output of the RAGG, but the mechanism is not clear. The purpose of this paper is to analyze the relationship between rotary table wobble and RAGG errors and to propose a method for rejecting these errors. We consider the influence of attitude changes, angular velocity, and angular acceleration caused by the wobble on the specific force, and we describe the error transmission process based on the accelerometer configuration and its measurement principle. Furthermore, we show through a simulated experiment that when the angular velocity noise caused by the wobble is 1 μrad/s, this will produce errors of tens of E. We propose a post-error correction method that is based on the higher-precision RAGG model and motion measurement. The errors in the two channels of the RAGG are reduced to 3.69 E and 1.85 E after error correction. The error analysis of the effects of wobble on a RAGG and the proposed error correction method are of great significance for the development of high-precision gradiometers.

A 2-year locomotive exploration and scientific investigation of the lunar farside by the Yutu-2 rover

The lunar nearside has been investigated by many uncrewed and crewed missions, but the farside of the Moon remains poorly known. Lunar farside exploration is challenging because maneuvering rovers with efficient locomotion in harsh extraterrestrial environment is necessary to explore geological characteristics of scientific interest. Chang'E-4 mission successfully targeted the Moon's farside and deployed a teleoperated rover (Yutu-2) to explore inside the Von Kármán crater, conveying rich information regarding regolith, craters, and rocks. Here, we report mobile exploration on the lunar farside with Yutu-2 over the initial 2 years. During its journey, Yutu-2 has experienced varying degrees of mild slip and skid, indicating that the terrain is relatively flat at large scales but scattered with local gentle slopes. Cloddy soil sticking on its wheels implies a greater cohesion of the lunar soil than encountered at other lunar landing sites. Further identification results indicate that the regolith resembles dry sand and sandy loam on Earth in bearing properties, demonstrating greater bearing strength than that identified during the Apollo missions. In sharp contrast to the sparsity of rocks along the traverse route, small fresh craters with unilateral moldable ejecta are abundant, and some of them contain high-reflectance materials at the bottom, suggestive of secondary impact events. These findings hint at notable differences in the surface geology between the lunar farside and nearside. Experience gained with Yutu-2 improves the understanding of the farside of the Moon, which, in return, may lead to locomotion with improved efficiency and larger range.

Promoting the doping efficiency and photoluminescence quantum yield of Mn-doped perovskite nanocrystals via two-step hot-injection

Manganese-doped perovskite nanocrystals (NCs) have been synthesized by a novel two-step hot-injection strategy with an unprecedented Mn doping efficiency of 48.5%, bright orange emission under ultraviolet light and X-ray excitation and a photoluminescence quantum yield of 84.4%, making them excellent luminescent materials.

[An optimized protocol of meniscus cell extraction for single-cell RNA sequencing]

OBJECTIVE

To optimize the protocol of meniscus cell extraction to enhance the efficiency of cell suspension preparation and maintain a high cell viability for single-cell RNA sequencing.

METHODS

We compared the efficiency of the routine cell extraction methods (short-time digestion and long-time digestion) and the optimized protocol for obtaining meniscus cell suspensions by evaluating the cell number obtained and the cell viability. Single-cell RNA sequencing datasets were analyzed to evaluate the stability of the cell suspension prepared using the optimized protocol. The reliability of the optimized protocol was assessed by comparing the single-cell RNA sequencing dataset obtained by the optimized protocol with published single-cell RNA sequencing datasets of the meniscus.

RESULTS

The optimized protocol harvested a greater number of cells (over 1×10⁵) than the routine protocols. The cell suspension prepared with the optimized protocol showed a cell viability higher than 80%, the highest among the 3 methods. Analysis of single-cell RNA sequencing datasets showed that the ratio of the mitochondrial genes was below 20% in over 80% of the cells. CD34⁺ cells, MCAM⁺ cells and COL1A1⁺ cells were identified in the datasets. Comparison with the publish datasets showed that the optimized protocol was capable of harvesting COL3A1⁺, COL1A1⁺, MYLK⁺, BMP2⁺, CD93⁺ and CDK1⁺ cells.

CONCLUSION

Single-cell suspension prepared from the meniscus can be stably obtained using the optimized protocol for single-cell RNA sequencing using the 10× Genomics platform.

Regularly fluctuating somatic cell count pattern in dairy herds

Online somatic cell count (SCC) measurement is widely used in dairy herds milked with automatic milking systems (AMS) and gives the opportunity to closely monitor individual cow udder health. Using automated SCC data, we observed cows displaying a remarkably regularly fluctuating SCC (rfSCC) pattern, which is described in this study. We aimed to (1) estimate the prevalence of rfSCC in cows milked by AMS, (2) characterize the rfSCC pattern, and (3) identify factors potentially associated with the rfSCC pattern. We analyzed 30-d episodes of composite SCC recordings of 1,000 cows from 55 dairy herds from 6 countries using an AMS with automated SCC measurement, and we identified the rfSCC pattern in 4.7% (95% CI: 3.5-6.2%) of these episodes. The rfSCC episodes had a median SCC of 701 × 1,000 cells/mL (2.5-97.5% quantile: 539-1,162), a median amplitude of 552 × 1,000 cells/mL (2.5-97.5% quantile: 409-886), and a median cycle length of 4.1 d (2.5-97.5% quantile: 3.7-4.9). Bacteriological culture data from quarter-milk samples collected every 2 wk in 1 Dutch AMS herd were analyzed, yielding no clear association between pathogen species and the rfSCC pattern found in that herd. Altogether, we described an intriguing phenomenon, present in almost 5% of the cows during a 1-mo study period. Further work is needed to quantify its importance in terms of udder health, but also to elucidate the mechanism behind this remarkable SCC pattern.

Synthesis of two-dimensional phenylethylamine tin-lead halide perovskites with bandgap bending behavior

Recently, two-dimensional (2D) metal halide perovskite materials with wide application in perovskite-based solar cells have attracted significant attention. Among them, 2D mixed lead-tin perovskites have not been systematically explored. Herein, we synthesize a 2D phenethylammonium (PEA) tin-lead bromide perovskite, PEA₂Sn _x Pb_1-x Br₄, via a simple solution-phase approach without toxic reagents and high temperatures. By tuning the ratio of Sn and Pb, the UV-vis absorption spectra showed unique bandgap bending behaviors. DFT calculations indicate the key effects of spin-orbital coupling (SOC) without the interference of lattice distortion. Moreover, we provided the standard equation with a correction term to introduce the influence of SOC. These results not only provide a step forward towards the bandgap engineering of perovskites, but also help to expand the application of 2D perovskite materials.

A general approach to realizing perovskite nanocrystals with insulating metal sulfate shells

The strategy of constructing the core/shell structure is of great importance in emitting semiconductor nanocrystals. However, the coating on soft metal halide perovskite nanocrystals at the single particle level remains a challenge because of the low compatibility between perovskites and common wide-band-gap semiconductors, such as ZnS and CdS. In addition, using these semiconductors as the shell layer requires high reaction temperatures, which often lead to undesirable chemical transformation. Herein we report a general route to passivate the perovskite nanocrystals by insulating metal sulfate shells. The passivating shell is created around the as-synthesized CsPbBr3 perovskite nanocrystals by initiating the reaction between an organic ammonium sulfate and a variety of metal ions in the presence of ligands. This new method allowed for creating insulating metal sulfate shells with controllable thicknesses and without unwanted chemical transformation. Importantly, these novel core/shell-structured nanocrystals show photoluminescence quantum yields near unity, highly suppressed energy transfer in film and suppressed halide exchange in solution.

All-Inorganic Quantum-Dot LEDs Based on a Phase-Stabilized α-CsPbI3 Perovskite

The all-inorganic nature of CsPbI₃ perovskites allows to enhance stability in perovskite devices. Research efforts have led to improved stability of the black phase in CsPbI₃ films; however, these strategies-including strain and doping-are based on organic-ligand-capped perovskites, which prevent perovskites from forming the close-packed quantum dot (QD) solids necessary to achieve high charge and thermal transport. We developed an inorganic ligand exchange that leads to CsPbI₃ QD films with superior phase stability and increased thermal transport. The atomic-ligand-exchanged QD films, once mechanically coupled, exhibit improved phase stability, and we link this to distributing strain across the film. Operando measurements of the temperature of the LEDs indicate that KI-exchanged QD films exhibit increased thermal transport compared to controls that rely on organic ligands. The LEDs exhibit a maximum EQE of 23 % with an electroluminescence emission centered at 640 nm (FWHM: ≈31 nm). These red LEDs provide an operating half-lifetime of 10 h (luminance of 200 cd m^-2 ) and an operating stability that is 6× higher than that of control devices.

TGIF2 promotes cervical cancer metastasis by negatively regulating FCMR

OBJECTIVE

We aimed at studying the correlation between TGIF2 expression and clinicopathological features of cervical cancer (CCa). The relationship between TGIF2 and FCMR and its influence on the proliferation and metastasis of tumor cells were investigated using molecular biology techniques, so as to reveal the pathogenesis of CCa and provide a new target for clinical treatment.

PATIENTS AND METHODS

TGIF2 expression in 60 pairs of cervical tumors and paracancerous tissues samples collected from CCa patients of our hospital was studied by quantitative real-time polymerase chain reaction (qPCR) analysis, and the association between TGIF2 expression and the clinical indicators or prognosis of CCa patients were analyzed. CCa cells with TGIF2 knockdown were constructed using transfection technology. Changes in the biological phenotypes (proliferation, migration, invasion) of CCa cells C33-A and HeLa after TGIF2 knockdown were determined by Cell Counting Kit-8 (CCK-8) and transwell assays. In addition, the effects of TGIF2/FCMR axis on CCa metastasis were further explored in nude mice in vivo.

RESULTS

Our data revealed a significant increase in TGIF2 mRNA expression in CCa tissue specimens compared to adjacent ones, and the increasing degree was positively correlated with the incidence of lymph node or distant metastasis of CCa patients. The results of CCK-8 and transwell suggested that knocking down TGIF2 effectively attenuated the proliferative ability and invasiveness of CCa cells. Luciferase assay confirmed that TGIF2 can directly bind to the DNA promoter of its target gene FCMR. Simultaneous transfection of sh-TGIF2 and sh-FCMR partially reversed the inhibitory effect of single transfection of TGIF2 knockdown on the malignant progression of CCa. Experiments in nude mice also suggested that TGIF2 could promote CCa tumorigenesis through the modulation of FCMR expression.

CONCLUSIONS

In summary, TGIF2 can promote the migration and proliferation ability of cervical cancer cells via down-regulating FCMR. Our study provides a new therapeutic target for the clinical treatment of cervical cancer.

Accurate diagnosis of colorectal cancer based on histopathology images using artificial intelligence

BACKGROUND

Accurate and robust pathological image analysis for colorectal cancer (CRC) diagnosis is time-consuming and knowledge-intensive, but is essential for CRC patients' treatment. The current heavy workload of pathologists in clinics/hospitals may easily lead to unconscious misdiagnosis of CRC based on daily image analyses.

METHODS

Based on a state-of-the-art transfer-learned deep convolutional neural network in artificial intelligence (AI), we proposed a novel patch aggregation strategy for clinic CRC diagnosis using weakly labeled pathological whole-slide image (WSI) patches. This approach was trained and validated using an unprecedented and enormously large number of 170,099 patches, > 14,680 WSIs, from > 9631 subjects that covered diverse and representative clinical cases from multi-independent-sources across China, the USA, and Germany.

RESULTS

Our innovative AI tool consistently and nearly perfectly agreed with (average Kappa statistic 0.896) and even often better than most of the experienced expert pathologists when tested in diagnosing CRC WSIs from multicenters. The average area under the receiver operating characteristics curve (AUC) of AI was greater than that of the pathologists (0.988 vs 0.970) and achieved the best performance among the application of other AI methods to CRC diagnosis. Our AI-generated heatmap highlights the image regions of cancer tissue/cells.

CONCLUSIONS

This first-ever generalizable AI system can handle large amounts of WSIs consistently and robustly without potential bias due to fatigue commonly experienced by clinical pathologists. It will drastically alleviate the heavy clinical burden of daily pathology diagnosis and improve the treatment for CRC patients. This tool is generalizable to other cancer diagnosis based on image recognition.

Lead-free Mn-doped antimony halide perovskite quantum dots with bright deep-red emission

We reported the first synthesis of Mn2+ doped Cs3Sb2Clx/Br9-x (0 ≤ x ≤ 9) perovskite quantum dots (PQDs) by regulating the coprecipitation of Mn2+ and Sb3+ with thiol ligands. These lead-free PQDs demonstrated bright photoluminescence emission centered at 660 nm and a high quantum yield of ∼49%, making them suitable for optical applications.

Community diversity and abundance of ammonia-oxidizing archaea and bacteria in shrimp pond sediment at different culture stages

AIMS

Ammonia oxidation is a significant process of nitrogen cycles in a lot of ecosystems sediments while there are few studies in shrimp culture pond (SCP) sediments. This paper attempted to explore the community diversity and abundance of ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) in SCP sediments at different culture stages.

METHODS AND RESULTS

We collected SCP sediments and analysed the community diversity and abundance of AOA and bacteria in shrimp pond sediment at different culture stages using the ammonia monooxygenase (amoA) gene with quantitative PCR (qPCR) and 16S rRNA gene sequencing. The AOB-amoA gene abundance was showed higher than AOA-amoA gene abundance in SCP sediments on Day 50 and Day 60 after shrimp larvae introducing into the pond, and the diversity of AOA in SCP sediments was higher than that of AOB. The phylogenetic tree revealed that the most of AOA were the member of Nitrosopumilus and Nitrososphaera, and the majority of AOB sequences were clustered into Nitrosospira, Nitrosomonas clusters 6a and 7. The AOA community has close relationship with total organic carbon (TOC), pH, total phosphorus (TP), nitrate reductase, urease, acid phosphatase and β-glucosidase. The AOB community was related to TOC, C/N and nitrate reductase.

CONCLUSIONS

AOA and AOB play the different ecological roles in SCP sediments at different culture stages.

SIGNIFICANCE AND IMPACT OF THE STUDY

Our results suggested that the different community diversity and abundance of AOA and AOB in SCP sediments, which may improve our ecological cognition of shrimp culture stages in SCP ecosystems.

TRAF5 promotes the occurrence and development of colon cancer via the activation of PI3K/AKT/NF-κB signaling pathways

This study aimed to investigate the expression and biological functions of TRAF5 in colon cancer at tissue and cellular levels. Forty-two patients with colon cancer were included in the present study. Tumor tissues and tumor-adjacent tissues were collected from all patients. Bioinformatics was used to analyze how TRAF5 was related to metastasis and prognosis of colon cancer. Quantitative real-time polymerase chain reaction was carried out to determine the expression of mRNA. SW620 and SW480 cells were used to study the inhibition and overexpression of TRAF5, respectively. CCK-8 assay was used to examine cell proliferation. Flow cytometry was employed to investigate cell phase and apoptosis. Transwell assay was used to study migration and invasion of cells. Western blotting was utilized to test how TRAF5 expression affected the activities of PI3K/AKT/NF-κB signaling pathways. Bioinformatics showed that the expression of TRAF5 in colon cancer tissues was correlated with metastasis and prognosis of the tumor. TRAF5 mRNA expression was up-regulated in colon cancer tissues, and related to recurrence and metastasis of the cancer. In vitro experiments showed that TRAF5 expression promoted proliferation, migration, and invasion of colon cancer cells, but reduced apoptosis of the cells. Moreover, TRAF5 might exert its biological functions by activating PI3K/AKT/NF-κB signaling pathways in colon cancer cells. In conclusion, TRAF5 expression in colon cancer tissues is up-regulated and correlated with prognosis, lymphatic metastasis and clinical staging. TRAF5 promotes the occurrence and development of colon cancer by activating PI3K/ AKT/NF-κB signaling pathways, and acts as an oncogene.

Plasma exosomal miR-125a-5p and miR-141-5p as non-invasive biomarkers for prostate cancer

Predictive biomarkers for early diagnosis of prostate cancer are important for its treatment. The functional microRNAs in the exosomes of plasma and serum samples are of interest as stable and non-invasive biomarkers for recurrence in cancer patients. The present study aimed to clarify the value of plasma exosomal miRNA-125a-5p and miR-141-5p as biomarkers for the diagnosis of prostate cancer. The study included 19 healthy individuals and 31 prostate cancer patients. In comparison to the levels in healthy controls, exosomal miR-141-5p levels showed a slight increase in prostate cancer patients (p=0.085), and miR-125a-5p levels that showed a significant decrease in patients with prostate cancer than in healthy controls (p=0.032). As a derived parameter, the miR-125a-5p/miR-141-5p ratio was significantly higher in patients with prostate cancer than in healthy controls (p<0.001). We found that exosomal miR-141-5p in plasma showed a promise in distinguishing prostate cancer patients with the AUC of 0.652, and for miR-125a-5p, the AUC was 0.691. For the miR-125a-5p/miR-141-5p ratio, the AUC value was 0.793. We found that miR-125a-5p has a weak positive correlation with PSA (correlation coefficient = 0.3413). Moreover, miR-141-5p has been found to hold a negatively no-significant correlation with PSA, with the correlation coefficient is -0.1102. We speculate that, as diagnostic markers for prostate cancer, miR-125-5p and miR-141-5p might be independent of the PSA. In summary, the results of this study suggest that high plasma exosomal expression of miR-141-3p and low expression of miR-125a-5p in plasma exosomes from prostate cancer patients might be useful markers of specific tumor traits associated with prostate cancer. Moreover, the miR-125a-5p/miR-141-5p ratio seems to perform better than either of the single values alone.

In Situ Measurement of Vacuum Window Birefringence using 25Mg+ Fluorescence

Accurate control of the polarization states of laser light is important in precision measurement experiments. In experiments involving the use of a vacuum environment, the stress-induced birefringence effect of the vacuum windows will affect the polarization states of laser light inside the vacuum system, and it is very difficult to measure and optimize the polarization states of the laser light in situ. The purpose of this protocol is to demonstrate how to optimize the polarization states of the laser light based on the fluorescence of ions in the vacuum system, and how to calculate the birefringence of vacuum windows based on azimuthal angles of external wave plates with Mueller matrix. The fluorescence of ²⁵Mg⁺ ions induced by laser light that is resonant with the transition of |3²P3/2,F = 4, mF = 4 → |3²S1/2,F = 3, mF = 3 is sensitive to the polarization state of the laser light, and maximum fluorescence will be observed with pure circularly polarized light. A combination of half-wave plate (HWP) and quarter-wave plate (QWP) can achieve arbitrary phase retardation and is used for compensating the birefringence of the vacuum window. In this experiment, the polarization state of the laser light is optimized based on the fluorescence of ²⁵Mg⁺ ion with a pair of HWP and QWP outside the vacuum chamber. By adjusting the azimuthal angles of the HWP and QWP to obtain maximum ion fluorescence, one can obtain a pure circularly polarized light inside the vacuum chamber. With the information on the azimuthal angles of the external HWP and QWP, the birefringence of the vacuum window can be determined.