1
|
Nanotubes from Lanthanide-Based Misfit-Layered Compounds: Understanding the Growth, Thermodynamic, and Kinetic Stability Limits. CHEMISTRY OF MATERIALS : A PUBLICATION OF THE AMERICAN CHEMICAL SOCIETY 2024; 36:4736-4749. [PMID: 38770011 PMCID: PMC11104483 DOI: 10.1021/acs.chemmater.4c00481] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/21/2024] [Revised: 04/19/2024] [Accepted: 04/19/2024] [Indexed: 05/22/2024]
Abstract
Gaining insights into the kinetics and the thermodynamic limits of nanostructures in high-temperature reactions is crucial for controlling their unique morphology, phase, and structure. Nanotubes from lanthanide-based misfit-layered compounds (MLCs) have been known for more than a decade and were successfully produced mostly via a chemical vapor transport protocol. The MLC nanotubes show diverse structural arrangements and lattice disorders, which could have a salient impact on their properties. Though their structure and charge transfer properties are reasonably well understood, a lack of information on their thermodynamic and kinetic stability limits their scalable synthesis and their applicability in modern technologies. In this study, the growth, thermodynamic stability, and decomposition kinetics of lanthanide-based misfit nanotubes of two model compounds, i.e., (LaS)1.14TaS2 and (SmS)1.19TaS2 are elucidated in detail. The nanotubes were carefully analyzed via atomic resolution electron microscopy imaging and synchrotron-based X-ray and electron diffraction techniques, and the information on their morphology, phase, and structures was deduced. The key insights gained would help to establish the parameters to explore their physio-chemical properties further. Furthermore, this study sheds light on the complex issue of the high-temperature stability of nanotubes and nanostructures in general.
Collapse
|
2
|
Selective Detection of Active Extracellular Granzyme A by Using a Novel Fluorescent Immunoprobe with Application to Inflammatory Diseases. ACS Pharmacol Transl Sci 2024; 7:1474-1484. [PMID: 38751645 PMCID: PMC11092195 DOI: 10.1021/acsptsci.4c00065] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/07/2024] [Revised: 04/05/2024] [Accepted: 04/10/2024] [Indexed: 05/18/2024]
Abstract
Granzymes (Gzms), a family of serine proteases, expressed by immune and nonimmune cells, present perforin-dependent and independent intracellular and extracellular functions. When released in the extracellular space, GzmA, with trypsin-like activity, is involved in the pathophysiology of different inflammatory diseases. However, there are no validated specific systems to detect active forms of extracellular GzmA, making it difficult to assess its biological relevance and potential use as a biomarker. Here, we have developed fluorescence-energy resonance-transfer (FRET)-based peptide probes (FAM-peptide-DABCYL) to specifically detect GzmA activity in tissue samples and biological fluids in both mouse and human samples during inflammatory diseases. An initial probe was developed and incubated with GzmA and different proteases like GzmB and others with similar cleavage specificity as GzmA like GzmK, thrombin, trypsin, kallikrein, or plasmin. After measuring fluorescence, the probe showed very good specificity and sensitivity for human and mouse GzmA when compared to GzmB, its closest homologue GzmK, and with thrombin. The specificity of this probe was further refined by incubating the samples in a coated plate with a GzmA-specific antibody before adding the probe. The results show a high specific detection of soluble GzmA even when compared with other soluble proteases with very similar cleavage specificity like thrombin, GzmK, trypsin, kallikrein, or plasmin, which shows nearly no fluorescence signal. The high specific detection of GzmA was validated, showing that using pure proteins and serum and tissue samples from GzmA-deficient mice presented a significant reduction in the signal compared with WT mice. The utility of this system in humans was confirmed, showing that GzmA activity was significantly higher in serum samples from septic patients in comparison with healthy donors. Our results present a new immunoprobe with utility to detect extracellular GzmA activity in different biological fluids, confirming the presence of active forms of the soluble protease in vivo during inflammatory and infectious diseases.
Collapse
|
3
|
Isolation of a Cyclic Trinuclear Gold(I) Complex with Metalated Phosphorus Ylides: Synthesis and Structural Properties. Inorg Chem 2024; 63:6589-6599. [PMID: 38442251 PMCID: PMC11022181 DOI: 10.1021/acs.inorgchem.3c03740] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/23/2023] [Revised: 01/25/2024] [Accepted: 02/19/2024] [Indexed: 03/07/2024]
Abstract
The first chiral and luminescent cyclic trinuclear gold(I) complex, [{AuCH(PPh2Me)(Ph2P)}3]3+, has been isolated with metalated phosphorus ylides (PY). This complex was initially obtained through the reaction of either mononuclear [C6F5SAuCH(PPh2Me)(Ph2P)]OTf or dinuclear [C6F5S{AuCH(PPh2Me)(Ph2P)}2](OTf)2 thiolate-gold-phosphane complexes in the presence of NaH, followed by the abstraction of the thiopyridine moiety employing either AgOTf or [Cu(CH3CN)4]PF6. Our quest for a more efficient synthesis route led to the development of a streamlined one-pot synthesis method, employing Ag(acac) as both a halogen abstractor and a base, offering a quicker and more direct path to this intriguing trimer. Comprehensive computational studies have unveiled the luminescent characteristics of this complex, which can be attributed to phosphorescence. These emissions originate from ligand-to-metal (LMCT) and metal-centered (MC) charge transfer excited states. Furthermore, the structural analysis via X-ray crystallography corroborated the formation of a trimeric species, featuring three monomers with the [AuCH(PPh2Me)(Ph2P)] motif. Each monomer exhibits a single chiral center, leading to four possible absolute configurations (RRR, RRS, RSR, and SRR). NMR and X-ray spectroscopy have provided valuable insights, establishing that the former configuration (RRR) is disfavored due to steric hindrance, while the three remaining configurations can interconvert, arising from the structural arrangement of the metallacycle and inherent symmetry operations.
Collapse
|
4
|
Generation of Self-Induced Myocardial Ischemia in Large-Sized Cardiac Spheroids without Alteration of Environmental Conditions Recreates Fibrotic Remodeling and Tissue Stiffening Revealed by Constriction Assays. ACS Biomater Sci Eng 2024; 10:987-997. [PMID: 38234159 PMCID: PMC10865285 DOI: 10.1021/acsbiomaterials.3c01302] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2023] [Revised: 01/09/2024] [Accepted: 01/09/2024] [Indexed: 01/19/2024]
Abstract
A combination of human-induced pluripotent stem cells (hiPSCs) and 3D microtissue culture techniques allows the generation of models that recapitulate the cardiac microenvironment for preclinical research of new treatments. In particular, spheroids represent the simplest approach to culture cells in 3D and generate gradients of cellular access to the media, mimicking the effects of an ischemic event. However, previous models required incubation under low oxygen conditions or deprived nutrient media to recreate ischemia. Here, we describe the generation of large spheroids (i.e., larger than 500 μm diameter) that self-induce an ischemic core. Spheroids were generated by coculture of cardiomyocytes derived from hiPSCs (hiPSC-CMs) and primary human cardiac fibroblast (hCF). In the proper medium, cells formed aggregates that generated an ischemic core 2 days after seeding. Spheroids also showed spontaneous cellular reorganization after 10 days, with hiPSC-CMs located at the center and surrounded by hCFs. This led to an increase in microtissue stiffness, characterized by the implementation of a constriction assay. All in all, these phenomena are hints of the fibrotic tissue remodeling secondary to a cardiac ischemic event, thus demonstrating the suitability of these spheroids for the modeling of human cardiac ischemia and its potential application for new treatments and drug research.
Collapse
|
5
|
Ultrasmall Functionalized UiO-66 Nanoparticle/Polymer Pebax 1657 Thin-Film Nanocomposite Membranes for Optimal CO 2 Separation. ACS APPLIED MATERIALS & INTERFACES 2024; 16:4024-4034. [PMID: 38214452 PMCID: PMC10811625 DOI: 10.1021/acsami.3c16093] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/27/2023] [Revised: 12/21/2023] [Accepted: 12/26/2023] [Indexed: 01/13/2024]
Abstract
Ultrasmall 4 to 6 nm nanoparticles of the metal-organic framework (MOF) UiO-66 (University of Oslo-66) were successfully prepared and embedded into the polymer Pebax 1657 to fabricate thin-film nanocomposite (TFN) membranes for CO2/N2 and CO2/CH4 separations. Furthermore, it has been demonstrated that ligand functionalization with amino (-NH2) and nitro (-NO2) groups significantly enhances the gas separation performance of the membranes. For CO2/N2 separation, 7.5 wt % UiO-66-NH2 nanoparticles provided a 53% improvement in CO2 permeance over the pristine membrane (from 181 to 277 GPU). Regarding the CO2/N2 selectivity, the membranes prepared with 5 wt % UiO-66-NO2 nanoparticles provided an increment of 17% over the membrane without the MOF (from 43.5 to 51.0). However, the CO2 permeance of this membrane dropped to 155 GPU. The addition of 10 wt % ZIF-94 particles with an average particle size of ∼45 nm into the 5 wt % UiO-66-NO2 membrane allowed to increase the CO2 permeance to 192 GPU while maintaining the CO2/N2 selectivity at ca. 51 due to the synergistic interaction between the MOFs and the polymer matrix provided by the hydrophilic nature of ZIF-94. In the case of CO2/CH4 separation, the 7.5 wt % UiO-66-NH2 membrane exhibited the best performance with an increase of the CO2 permeance from 201 to 245 GPU.
Collapse
|
6
|
Structure-Guided Approach for the Development of MUC1-Glycopeptide-Based Cancer Vaccines with Predictable Responses. JACS AU 2024; 4:150-163. [PMID: 38274250 PMCID: PMC10807005 DOI: 10.1021/jacsau.3c00587] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/30/2023] [Revised: 11/08/2023] [Accepted: 11/09/2023] [Indexed: 01/27/2024]
Abstract
Mucin-1 (MUC1) glycopeptides are exceptional candidates for potential cancer vaccines. However, their autoantigenic nature often results in a weak immune response. To overcome this drawback, we carefully engineered synthetic antigens with precise chemical modifications. To be effective and stimulate an anti-MUC1 response, artificial antigens must mimic the conformational dynamics of natural antigens in solution and have an equivalent or higher binding affinity to anti-MUC1 antibodies than their natural counterparts. As a proof of concept, we have developed a glycopeptide that contains noncanonical amino acid (2S,3R)-3-hydroxynorvaline. The unnatural antigen fulfills these two properties and effectively mimics the threonine-derived antigen. On the one hand, conformational analysis in water shows that this surrogate explores a landscape similar to that of the natural variant. On the other hand, the presence of an additional methylene group in the side chain of this analog compared to the threonine residue enhances a CH/π interaction in the antigen/antibody complex. Despite an enthalpy-entropy balance, this synthetic glycopeptide has a binding affinity slightly higher than that of its natural counterpart. When conjugated with gold nanoparticles, the vaccine candidate stimulates the formation of specific anti-MUC1 IgG antibodies in mice and shows efficacy comparable to that of the natural derivative. The antibodies also exhibit cross-reactivity to selectively target, for example, human breast cancer cells. This investigation relied on numerous analytical (e.g., NMR spectroscopy and X-ray crystallography) and biophysical techniques and molecular dynamics simulations to characterize the antigen-antibody interactions. This workflow streamlines the synthetic process, saves time, and reduces the need for extensive, animal-intensive immunization procedures. These advances underscore the promise of structure-based rational design in the advance of cancer vaccine development.
Collapse
|
7
|
Experimental and Modeling High-Pressure Study of Ammonia-Methane Oxidation in a Flow Reactor. ENERGY & FUELS : AN AMERICAN CHEMICAL SOCIETY JOURNAL 2024; 38:1399-1415. [PMID: 38264622 PMCID: PMC10804275 DOI: 10.1021/acs.energyfuels.3c03959] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/11/2023] [Revised: 12/21/2023] [Accepted: 12/21/2023] [Indexed: 01/25/2024]
Abstract
The present work deals with an experimental and modeling analysis of the oxidation of ammonia-methane mixtures at high pressure (up to 40 bar) in the 550-1250 K temperature range using a quartz tubular reactor and argon as a diluent. The impact of temperature, pressure, oxygen stoichiometry, and CH4/NH3 ratio has been analyzed on the concentrations of NH3, NO2, N2O, NO, N2, HCN, CH4, CO, and CO2 obtained as main products of the ammonia-methane mixture oxidation. The main results obtained indicate that increasing either the pressure, CH4/NH3 ratio, or stoichiometry results in a shift of NH3 and CH4 conversion to lower temperatures. The effect of pressure is particularly significant in the low range of pressures studied. The main products of ammonia oxidation are N2, NO, and N2O while NO2 concentrations are below the detection limit for all of the conditions considered. The N2O formation is favored by increasing the CH4/NH3 ratio and stoichiometry. The experimental results are simulated and interpreted in terms of an updated detailed chemical kinetic mechanism, which, in general, is able to describe well the conversion of both NH3 and CH4 under almost all of the studied conditions. Nevertheless, some discrepancies are found between the experimental results and model calculations.
Collapse
|
8
|
Multimodal and Multistimuli 4D-Printed Magnetic Composite Liquid Crystal Elastomer Actuators. ACS APPLIED MATERIALS & INTERFACES 2024; 16:2704-2715. [PMID: 38150329 PMCID: PMC10797586 DOI: 10.1021/acsami.3c14607] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/29/2023] [Revised: 12/03/2023] [Accepted: 12/05/2023] [Indexed: 12/29/2023]
Abstract
Liquid crystal elastomer (LCE)-based soft actuators are being studied for their significant shape-changing abilities when they are exposed to heat or light. Nevertheless, their relatively slow response compared with soft magnetic materials limits their application possibilities. Integration of magnetic responsiveness with LCEs has been previously attempted; however, the LCE response is typically jeopardized in high volumes of magnetic microparticles (MMPs). Here, a multistimuli, magnetically active LCE (MLCE), capable of producing programmable and multimodal actuation, is presented. The MLCE, composed of MMPs within an LCE matrix, is generated through extrusion-based 4D printing that enables digital control of mesogen orientation even at a 1:1 (LCE:MMPs) weight ratio, a challenging task to accomplish with other methods. The printed actuators can significantly deform when thermally actuated as well as exhibit fast response to magnetic fields. When combining thermal and magnetic stimuli, modes of actuation inaccessible with only one input are achieved. For instance, the actuator is reconfigured into various states by using the heat-mediated LCE response, followed by subsequent magnetic addressing. The multistimuli capabilities of the MLCE composite expand its applicability where common LCE actuators face limitations in speed and precision. To illustrate, a beam-steering device developed by using these materials is presented.
Collapse
|
9
|
Application of Ion Mobility Spectrometry and the Derived Collision Cross Section in the Analysis of Environmental Organic Micropollutants. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2023; 57:21485-21502. [PMID: 38091506 PMCID: PMC10753811 DOI: 10.1021/acs.est.3c03686] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/16/2023] [Revised: 11/09/2023] [Accepted: 11/09/2023] [Indexed: 12/27/2023]
Abstract
Ion mobility spectrometry (IMS) is a rapid gas-phase separation technique, which can distinguish ions on the basis of their size, shape, and charge. The IMS-derived collision cross section (CCS) can serve as additional identification evidence for the screening of environmental organic micropollutants (OMPs). In this work, we summarize the published experimental CCS values of environmental OMPs, introduce the current CCS prediction tools, summarize the use of IMS and CCS in the analysis of environmental OMPs, and finally discussed the benefits of IMS and CCS in environmental analysis. An up-to-date CCS compendium for environmental contaminants was produced by combining CCS databases and data sets of particular types of environmental OMPs, including pesticides, drugs, mycotoxins, steroids, plastic additives, per- and polyfluoroalkyl substances (PFAS), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs), as well as their well-known transformation products. A total of 9407 experimental CCS values from 4170 OMPs were retrieved from 23 publications, which contain both drift tube CCS in nitrogen (DTCCSN2) and traveling wave CCS in nitrogen (TWCCSN2). A selection of publicly accessible and in-house CCS prediction tools were also investigated; the chemical space covered by the training set and the quality of CCS measurements seem to be vital factors affecting the CCS prediction accuracy. Then, the applications of IMS and the derived CCS in the screening of various OMPs were summarized, and the benefits of IMS and CCS, including increased peak capacity, the elimination of interfering ions, the separation of isomers, and the reduction of false positives and false negatives, were discussed in detail. With the improvement of the resolving power of IMS and enhancements of experimental CCS databases, the practicability of IMS in the analysis of environmental OMPs will continue to improve.
Collapse
|
10
|
Calculation of Protein Folding Thermodynamics Using Molecular Dynamics Simulations. J Chem Inf Model 2023; 63:7791-7806. [PMID: 37955428 PMCID: PMC10751793 DOI: 10.1021/acs.jcim.3c01107] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/20/2023] [Revised: 10/18/2023] [Accepted: 10/18/2023] [Indexed: 11/14/2023]
Abstract
Despite advances in artificial intelligence methods, protein folding remains in many ways an enigma to be solved. Accurate computation of protein folding energetics could help drive fields such as protein and drug design and genetic interpretation. However, the challenge of calculating the state functions governing protein folding from first-principles remains unaddressed. We present here a simple approach that allows us to accurately calculate the energetics of protein folding. It is based on computing the energy of the folded and unfolded states at different temperatures using molecular dynamics simulations. From this, two essential quantities (ΔH and ΔCp) are obtained and used to calculate the conformational stability of the protein (ΔG). With this approach, we have successfully calculated the energetics of two- and three-state proteins, representatives of the major structural classes, as well as small stability differences (ΔΔG) due to changes in solution conditions or variations in an amino acid residue.
Collapse
|
11
|
A Simple and Versatile Strategy for Oriented Immobilization of His-Tagged Proteins on Magnetic Nanoparticles. Bioconjug Chem 2023; 34:2275-2292. [PMID: 37882455 PMCID: PMC10739578 DOI: 10.1021/acs.bioconjchem.3c00417] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/22/2023] [Revised: 10/16/2023] [Accepted: 10/16/2023] [Indexed: 10/27/2023]
Abstract
Oriented and covalent immobilization of proteins on magnetic nanoparticles (MNPs) is particularly challenging as it requires both the functionality of the protein and the colloidal stability of the MNPs to be preserved. Here, we describe a simple, straightforward, and efficient strategy for MNP functionalization with proteins using metal affinity binding. Our method involves a single-step process where MNPs are functionalized using a preformed, ready-to-use nitrilotriacetic acid-divalent metal cation (NTA-M2+) complex and polyethylene glycol (PEG) molecules. As a proof-of-concept, we demonstrate the oriented immobilization of a recombinant cadherin fragment engineered with a hexahistidine tag (6His-tag) onto the MNPs. Our developed methodology is simple and direct, enabling the oriented bioconjugation of His-tagged cadherins to MNPs while preserving protein functionality and the colloidal stability of the MNPs, and could be extended to other proteins expressing a polyhistidine tag. When compared to the traditional method where NTA is first conjugated to the MNPs and afterward free metal ions are added to form the complex, this novel strategy results in a higher functionalization efficiency while avoiding MNP aggregation. Additionally, our method allows for covalent bonding of the cadherin fragments to the MNP surface while preserving functionality, making it highly versatile. Finally, our strategy not only ensures the correct orientation of the protein fragments on the MNPs but also allows for the precise control of their density. This feature enables the selective targeting of E-cadherin-expressing cells only when MNPs are decorated with a high density of cadherin fragments.
Collapse
|
12
|
Two Synthetic Tools to Deepen the Understanding of the Influence of Stereochemistry on the Properties of Iridium(III) Heteroleptic Emitters. Inorg Chem 2023; 62:19821-19837. [PMID: 37988596 PMCID: PMC10880056 DOI: 10.1021/acs.inorgchem.3c03133] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/07/2023] [Revised: 10/24/2023] [Accepted: 11/02/2023] [Indexed: 11/23/2023]
Abstract
Two complementary procedures are presented to prepare cis-pyridyl-iridium(III) emitters of the class [3b+3b+3b'] with two orthometalated ligands of the 2-phenylpyridine type (3b) and a third ligand (3b'). They allowed to obtain four emitters of this class and to compare their properties with those of the trans-pyridyl isomers. The finding starts from IrH5(PiPr3)2, which reacts with 2-(p-tolyl)pyridine to give fac-[Ir{κ2-C,N-[C6MeH3-py]}3] with an almost quantitative yield. Stirring the latter in the appropriate amount of a saturated solution of HCl in toluene results in the cis-pyridyl adduct IrCl{κ2-C,N-[C6MeH3-py]}2{κ1-Cl-[Cl-H-py-C6MeH4]} stabilized with p-tolylpyridinium chloride, which can also be transformed into dimer cis-[Ir(μ-OH){κ2-C,N-[C6MeH3-py]}2]2. Adduct IrCl{κ2-C,N-[C6MeH3-py]}2{κ1-Cl-[Cl-H-py-C6MeH4]} directly generates cis-[Ir{κ2-C,N-[C6MeH3-py]}2{κ2-C,N-[C6H4-Isoqui]}] and cis-[Ir{κ2-C,N-[C6MeH3-py]}2{κ2-C,N-[C6H4-py]}] by transmetalation from Li[2-(isoquinolin-1-yl)-C6H4] and Li[py-2-C6H4]. Dimer cis-[Ir(μ-OH){κ2-C,N-[C6MeH3-py]}2]2 is also a useful starting complex when the precursor molecule of 3b' has a fairly acidic hydrogen atom, suitable for removal by hydroxide groups. Thus, its reactions with 2-picolinic acid and acetylacetone (Hacac) lead to cis-Ir{κ2-C,N-[C6MeH3-py]}2{κ2-O,N-[OC(O)-py]} and cis-Ir{κ2-C,N-[C6MeH3-py]}2{κ2-O,O-[acac]}. The stereochemistry of the emitter does not significantly influence the emission wavelengths. On the contrary, its efficiency is highly dependent on and associated with the stability of the isomer. The more stable isomer shows a higher quantum yield and color purity.
Collapse
|
13
|
Inclusion of Sainfoin in the Concentrate of Finishing Lambs: Fatty Acid Profiles of Rumen, Plasma, and Muscle. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2023; 71:17947-17958. [PMID: 37955980 PMCID: PMC10682985 DOI: 10.1021/acs.jafc.3c05902] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/22/2023] [Revised: 10/19/2023] [Accepted: 10/25/2023] [Indexed: 11/15/2023]
Abstract
The effects of sainfoin inclusion (Onobrychis viciifolia) in the finishing concentrate for light lambs on the fatty acid (FA) composition of the ruminal digesta, plasma, and meat were evaluated. Twenty-six weaned male lambs were divided into three groups and fed individually ad libitum for 40 days with one of three concentrates differing in the level of sainfoin inclusion: 0% (0SF), 20% (20SF), and 40% (40SF). The rumen digesta showed an increase in C18:3 n-3 concentration and a decrease in C18:1 t10 concentration when sainfoin was included in the concentrate regardless of the level of inclusion. However, the highest C18:1 t11 and the lowest C18:2 n-6 proportions were obtained only in the 40SF rumen, showing a stronger t11 biohydrogenation pathway. In plasma, most effects were associated with changes in the levels of polyunsaturated FA (PUFA) n-3. The meat FA profile of 40SF lambs presented higher percentages of PUFA n-3 and CLA c9,t11 and a lower PUFA n-6/PUFA n-3 ratio compared with those from 0SF and 20SF diets because of the potentiation of the ruminal t11 pathway. Inclusions of 20 and 40% sainfoin both showed beneficial effects on meat quality; furthermore, these effects were most marked in the 40% sainfoin diet.
Collapse
|
14
|
Synthetic Control of the Defect Structure and Hierarchical Extra-Large-/Small-Pore Microporosity in Aluminosilicate Zeolite SWY. J Am Chem Soc 2023; 145:22097-22114. [PMID: 37755328 PMCID: PMC10571081 DOI: 10.1021/jacs.3c07873] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/22/2023] [Indexed: 09/28/2023]
Abstract
The SWY-type aluminosilicate zeolite, STA-30, has been synthesized via different routes to understand its defect chemistry and solid acidity. The synthetic parameters varied were the gel aging, the Al source, and the organic structure directing agent. All syntheses give crystalline materials with similar Si/Al ratios (6-7) that are stable in the activated K,H-form and closely similar by powder X-ray diffraction. However, they exhibit major differences in the crystal morphology and in their intracrystalline porosity and silanol concentrations. The diDABCO-C82+ (1,1'-(octane-1,8-diyl)bis(1,4-diazabicyclo[2.2.2]octan)-1-ium)-templated STA-30 samples (but not those templated by bisquinuclidinium octane, diQuin-C82+) possess hierarchical microporosity, consisting of noncrystallographic extra-large micropores (13 Å) that connect with the characteristic swy and gme cages of the SWY structure. This results in pore volumes up to 30% greater than those measured in activated diQuin-C8_STA-30 as well as higher concentrations of silanols and fewer Brønsted acid sites (BASs). The hierarchical porosity is demonstrated by isopentane adsorption and the FTIR of adsorbed pyridine, which shows that up to 77% of the BASs are accessible (remarkable for a zeolite that has a small-pore crystal structure). A structural model of single can/d6r column vacancies is proposed for the extra-large micropores, which is revealed unambiguously by high-resolution scanning transmission electron microscopy. STA-30 can therefore be prepared as a hierarchically porous zeolite via direct synthesis. The additional noncrystallographic porosity and, subsequently, the amount of SiOHs in the zeolites can be enhanced or strongly reduced by the choice of crystallization conditions.
Collapse
|
15
|
Exploring a Low-Cost Valorization Route for Amazonian Cocoa Pod Husks through Thermochemical and Catalytic Upgrading of Pyrolysis Vapors. ACS OMEGA 2023; 8:37610-37621. [PMID: 37841159 PMCID: PMC10568713 DOI: 10.1021/acsomega.3c06672] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/04/2023] [Accepted: 09/18/2023] [Indexed: 10/17/2023]
Abstract
Ecuador as an international leader in the production of cocoa beans produced more than 300 000 tons in 2021; hence, the management and valorization of the 2 MM tons of waste generated annually by this industry have a strategic and socioeconomic value. Consequently, appropriate technologies to avoid environmental problems and promote sustainable development and the bioeconomy, especially considering that this is a megadiverse country, are of the utmost relevance. For this reason, we explored a low-cost pyrolysis route for valorizing cocoa pod husks from Ecuador's Amazonian region, aiming at producing pyrolysis liquids (bio-oil), biochar, and gas as an alternative chemical source from cocoa residues in the absence of hydrogen. Downstream catalytic processing of hot pyrolysis vapors using Mo- and/or Ni-based catalysts and standalone γ-Al2O3 was applied for obtaining upgraded bio-oils in a laboratory-scale fixed bed reactor, at 500 °C in a N2 atmosphere. As a result, bimetallic catalysts increased the bio-oil aqueous phase yield by 6.6%, at the expense of the organic phase due to cracking reactions according to nuclear magnetic resonance (NMR) and gas chromatography-mass spectrometry (GC-MS) results. Overall product yield remained constant, in comparison to pyrolysis without any downstream catalytic treatment (bio-oil ∼39.0-40.0 wt % and permanent gases 24.6-26.6 wt %). Ex situ reduced and passivated MoNi/γ-Al2O3 led to the lowest organic phase and highest aqueous phase yields. The product distribution between the two liquid phases was also modified by the catalytic upgrading experiments carried out, according to heteronuclear single-quantum correlation (HSQC), total correlation spectroscopy (TOCSY), and NMR analyses. The detailed composition distribution reported here shows the chemical production potential of this residue and serves as a starting point for subsequent valorizing technologies and/or processes in the food and nonfood industry beneficiating society, environment, economy, and research.
Collapse
|
16
|
Dynamic Kinetic Resolution of Indole-Based Sulfenylated Heterobiaryls by Rhodium-Catalyzed Atroposelective Reductive Aldol Reaction. ACS Catal 2023; 13:12134-12141. [PMID: 37745194 PMCID: PMC10513111 DOI: 10.1021/acscatal.3c03422] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/25/2023] [Revised: 08/26/2023] [Indexed: 09/26/2023]
Abstract
A highly enantio- and diastereoselective dynamic kinetic resolution (DKR) of configurationally labile 3-aryl indole-2-carbaldehydes is described. The DKR proceeds via a Rh-catalyzed intermolecular asymmetric reductive aldol reaction with acrylate esters, with simultaneous generation of three stereogenic elements. The strategy relies on the labilization of the stereogenic axis that takes place thanks to a transient Lewis acid-base interaction (LABI) between the formyl group and a thioether moiety strategically located at the ortho' position. The atropisomeric indole products present a high degree of functionalization and can be further converted to a series of axially chiral derivatives, thereby expanding their potential application in drug discovery and asymmetric catalysis.
Collapse
|
17
|
Combustion Performance of Agropellets in an Experimental Fixed Bed Reactor versus a Commercial Grate Boiler. Validation of Ash Behavior. ACS OMEGA 2023; 8:29485-29499. [PMID: 37599989 PMCID: PMC10433344 DOI: 10.1021/acsomega.3c03201] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/09/2023] [Accepted: 07/25/2023] [Indexed: 08/22/2023]
Abstract
Agrobiomass is presented as a suitable alternative to contribute to the fossil fuel decarbonization strategy at the European level. To achieve the ambitious objectives established in this regard: (i) new biomass resources need to be used and therefore initially tested in order to confirm its potential for different applications, such as energy production, and (ii) biomass supply capacity needs to be enlarged; therefore, agroindustries converted into Integrated Biomass Logistic Center (IBLC) can play a key role. In this research, eight different agropellets (blends of wheat straw and maize stalk with forestry wood) were produced in a IBLC and tested in a commercial boiler, comparing the results with previous ones obtained in a fixed bed reactor test campaign and to a base case (woody pellets). This paper includes both individual results in terms of bottom ash, deposition, and a final comparison of ash behavior in both facilities. All biofuels tested showed an adequate performance in terms of efficiency and emissions, being slightly better for the agropellets produced with wheat straw. Regarding sintering and deposition, the tendencies found in the reactor investigation were also observed in the commercial boiler. Moreover, the assessment of the results from the boiler and reactor's tests proved that reactor experiments are representative and may be used to test new biofuels more efficiently in terms of effort and time allocated and could be used to predict sintering and deposition phenomenon occurrence.
Collapse
|
18
|
Stabilizing σ-hole Dimethyl Interactions. CRYSTAL GROWTH & DESIGN 2023; 23:5112-5116. [PMID: 37426544 PMCID: PMC10327473 DOI: 10.1021/acs.cgd.3c00347] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/21/2023] [Revised: 06/08/2023] [Indexed: 07/11/2023]
Abstract
Methyl groups bound to electronegative atoms, such as N or O, are recognized to participate in tetrel bonding as Lewis acids. On the other hand, the capability of methyl groups bound to electropositive atoms, such as B or Al, to act as Lewis bases has been recently reported. Herein, we analyze the combination of these two behaviors to establish attractive methyl···methyl interactions. We have explored the Cambridge Structural Database to find experimental examples of these dimethyl-bound systems, finding a significant degree of directionality in the relative disposition of the two methyl groups. Moreover, we have carried out a comprehensive computational analysis at the DFT level of the dimethyl interactions, including the natural bond orbital, energy decomposition analysis, and topological analysis of the electron density (QTAIM and NCI). The dimethyl interaction is characterized as weak yet attractive and based on electrostatics, with a non-negligible contribution from orbital charge transfer and polarization.
Collapse
|
19
|
Competition between N, C, N-Pincer and N, N-Chelate Ligands in Platinum(II). Inorg Chem 2023; 62:10152-10170. [PMID: 37343120 PMCID: PMC11003652 DOI: 10.1021/acs.inorgchem.3c00694] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/02/2023] [Indexed: 06/23/2023]
Abstract
Replacement of the chloride ligand of PtCl{κ3-N,C,N-[py-C6HR2-py]} (R = H (1), Me (2)) and PtCl{κ3-N,C,N-[py-O-C6H3-O-py]} (3) by hydroxido gives Pt(OH){κ3-N,C,N-[py-C6HR2-py]} (R = H (4), Me (5)) and Pt(OH){κ3-N,C,N-[py-O-C6H3-O-py]} (6). These compounds promote deprotonation of 3-(2-pyridyl)pyrazole, 3-(2-pyridyl)-5-methylpyrazole, 3-(2-pyridyl)-5-trifluoromethylpyrazole, and 2-(2-pyridyl)-3,5-bis(trifluoromethyl)pyrrole. The coordination of the anions generates square-planar derivatives, which in solution exist as a unique species or equilibria between isomers. Reactions of 4 and 5 with 3-(2-pyridyl)pyrazole and 3-(2-pyridyl)-5-methylpyrazole provide Pt{κ3-N,C,N-[py-C6HR2-py]}{κ1-N1-[R'pz-py]} (R = H; R' = H (7), Me (8). R = Me; R' = H (9), Me (10)), displaying κ1-N1-pyridylpyrazolate coordination. A 5-trifluoromethyl substituent causes N1-to-N2 slide. Thus, 3-(2-pyridyl)-5-trifluoromethylpyrazole affords equilibria between Pt{κ3-N,C,N-[py-C6HR2-py]}{κ1-N1-[CF3pz-py]} (R = H (11a), Me (12a)) and Pt{κ3-N,C,N-[py-C6HR2-py]}{κ1-N2-[CF3pz-py]} (R = H (11b), Me (12b)). 1,3-Bis(2-pyridyloxy)phenyl allows the chelating coordination of the incoming anions. Deprotonations of 3-(2-pyridyl)pyrazole and its substituted 5-methyl counterpart promoted by 6 lead to equilibria between Pt{κ3-N,C,N-[pyO-C6H3-Opy]}{κ1-N1-[R'pz-py]} (R' = H (13a), Me (14a)) with a κ-N1-pyridylpyrazolate anion, keeping the pincer coordination of the di(pyridyloxy)aryl ligand, and Pt{κ2-N,C-[pyO-C6H3(Opy)]}{κ2-N,N-[R'pz-py]} (R' = H (13c), Me (14c)) with two chelates. Under the same conditions, 3-(2-pyridyl)-5-trifluoromethylpyrazole generates the three possible isomers: Pt{κ3-N,C,N-[pyO-C6H3-Opy]}{κ1-N1-[CF3pz-py]} (15a), Pt{κ3-N,C,N-[pyO-C6H3-Opy]}{κ1-N2-[CF3pz-py]} (15b), and Pt{κ2-N,C-[pyO-C6H3(Opy)]}{κ2-N,N-[CF3pz-py]} (15c). The N1-pyrazolate atom produces a remote stabilizing effect on the chelating form, pyridylpyrazolates being better chelate ligands than pyridylpyrrolates. Accordingly, reactions of 4-6 with 2-(2-pyridyl)-3,5-bis(trifluoromethyl)pyrrole yield Pt{κ3-N,C,N-[py-C6HR2-py]}{κ1-N1-[(CF3)2C4(py)HN]} (R = H (16), Me (17)) or Pt{κ3-N,C,N-[pyO-C6H3-Opy]}{κ1-N1-[(CF3)2C4(py)HN]} (18), displaying κ1-N1-pyrrolate coordination. Complexes 7-10 are efficient green phosphorescent emitters (488-576 nm). In poly(methyl methacrylate) (PMMA) films and in dichloromethane, they experience self-quenching, due to molecular stacking. Aggregation occurs through aromatic π-π interactions, reinforced by weak platinum-platinum interactions.
Collapse
|
20
|
An Old Crystallization Technique as a Fast, Facile, and Adaptable Method for Obtaining Single Crystals of Unstable "Li 2TCNQF 4" and New Compounds of TCNQ or TCNQF 4: Syntheses, Crystal Structures, and Magnetic Properties. CRYSTAL GROWTH & DESIGN 2023; 23:4357-4369. [PMID: 37304399 PMCID: PMC10251768 DOI: 10.1021/acs.cgd.3c00160] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/15/2023] [Revised: 04/26/2023] [Indexed: 06/13/2023]
Abstract
Detailed structural information is essential for understanding the properties of TCNQ and TCNQF4 compounds (TCNQ = 7,7,8,8-tetracyanoquinodimethane; TCNQF4 = 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane). The ineludible requirement of obtaining crystals of a size and quality sufficient to yield a successful X-ray diffraction analysis has been challenging to satisfy because of the instability of many of these compounds in solution. Crystals of two new complexes of TCNQ, [trans-M(2ampy)2(TCNQ)2] [M = Ni (1), Zn (2); 2ampy = 2-aminomethylpyridine], as well as unstable [Li2(TCNQF4)(CH3CN)4]·CH3CN (3), can be prepared in minutes by a horizontal diffusion technique and can be harvested easily for X-ray structural studies. Compound 3, previously described as "Li2TCNQF4," forms a one-dimensional (1D) ribbon. Compounds 1 and 2 can also be obtained as microcrystalline solids from methanolic solutions of MCl2/LiTCNQ/2ampy. Their variable-temperature magnetic studies confirmed a contribution of strongly antiferromagnetically coupled pairs of TCNQ•- anion radicals at higher temperatures with exchange coupling J/kB = -1206 K and J/kB = -1369 K for 1 and 2, respectively, estimated using a spin dimer model. The presence of magnetically active anisotropic Ni(II) atoms with S = 1 in 1 was confirmed, and the magnetic behavior of 1, representing an infinite chain of alternating S = 1 sites and S = 1/2 dimers, was described by a spin-ring model suggesting ferromagnetic exchange coupling between Ni(II) sites and anion radicals.
Collapse
|
21
|
Graphene Oxide: Key to Efficient Charge Extraction and Suppression of Polaronic Transport in Hybrids with Poly (3-hexylthiophene) Nanoparticles. CHEMISTRY OF MATERIALS : A PUBLICATION OF THE AMERICAN CHEMICAL SOCIETY 2023; 35:3522-3531. [PMID: 37181669 PMCID: PMC10173772 DOI: 10.1021/acs.chemmater.3c00008] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/02/2023] [Revised: 04/05/2023] [Indexed: 05/16/2023]
Abstract
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs-GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs-GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs-GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs-GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles.
Collapse
|
22
|
Tungsten Oxide Mediated Quasi-van der Waals Epitaxy of WS 2 on Sapphire. ACS NANO 2023; 17:5399-5411. [PMID: 36883970 PMCID: PMC10062024 DOI: 10.1021/acsnano.2c09754] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/30/2022] [Accepted: 03/01/2023] [Indexed: 06/18/2023]
Abstract
Conventional epitaxy plays a crucial role in current state-of-the art semiconductor technology, as it provides a path for accurate control at the atomic scale of thin films and nanostructures, to be used as the building blocks in nanoelectronics, optoelectronics, sensors, etc. Four decades ago, the terms "van der Waals" (vdW) and "quasi-vdW (Q-vdW) epitaxy" were coined to explain the oriented growth of vdW layers on 2D and 3D substrates, respectively. The major difference with conventional epitaxy is the weaker interaction between the epi-layer and the epi-substrates. Indeed, research on Q-vdW epitaxial growth of transition metal dichalcogenides (TMDCs) has been intense, with oriented growth of atomically thin semiconductors on sapphire being one of the most studied systems. Nonetheless, there are some striking and not yet understood differences in the literature regarding the orientation registry between the epi-layers and epi-substrate and the interface chemistry. Here we study the growth of WS2 via a sequential exposure of the metal and the chalcogen precursors in a metal-organic chemical vapor deposition (MOCVD) system, introducing a metal-seeding step prior to the growth. The ability to control the delivery of the precursor made it possible to study the formation of a continuous and apparently ordered WO3 mono- or few-layer at the surface of a c-plane sapphire. Such an interfacial layer is shown to strongly influence the subsequent quasi-vdW epitaxial growth of the atomically thin semiconductor layers on sapphire. Hence, here we elucidate an epitaxial growth mechanism and demonstrate the robustness of the metal-seeding approach for the oriented formation of other TMDC layers. This work may enable the rational design of vdW and quasi-vdW epitaxial growth on different material systems.
Collapse
|
23
|
O-Linked Sialoglycans Modulate the Proteolysis of SARS-CoV-2 Spike and Likely Contribute to the Mutational Trajectory in Variants of Concern. ACS CENTRAL SCIENCE 2023; 9:393-404. [PMID: 36968546 PMCID: PMC10037455 DOI: 10.1021/acscentsci.2c01349] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/11/2022] [Indexed: 06/18/2023]
Abstract
The emergence of a polybasic cleavage motif for the protease furin in SARS-CoV-2 spike has been established as a major factor for human viral transmission. The region N-terminal to that motif is extensively mutated in variants of concern (VOCs). Besides furin, spikes from these variants appear to rely on other proteases for maturation, including TMPRSS2. Glycans near the cleavage site have raised questions about proteolytic processing and the consequences of variant-borne mutations. Here, we identify that sialic acid-containing O-linked glycans on Thr678 of SARS-CoV-2 spike influence furin and TMPRSS2 cleavage and posit O-linked glycosylation as a likely driving force for the emergence of VOC mutations. We provide direct evidence that the glycosyltransferase GalNAc-T1 primes glycosylation at Thr678 in the living cell, an event that is suppressed by mutations in the VOCs Alpha, Delta, and Omicron. We found that the sole incorporation of N-acetylgalactosamine did not impact furin activity in synthetic O-glycopeptides, but the presence of sialic acid reduced the furin rate by up to 65%. Similarly, O-glycosylation with a sialylated trisaccharide had a negative impact on TMPRSS2 cleavage. With a chemistry-centered approach, we substantiate O-glycosylation as a major determinant of spike maturation and propose disruption of O-glycosylation as a substantial driving force for VOC evolution.
Collapse
|
24
|
Ligand Design and Preparation, Photophysical Properties, and Device Performance of an Encapsulated-Type Pseudo-Tris(heteroleptic) Iridium(III) Emitter. Inorg Chem 2023; 62:3847-3859. [PMID: 36802562 PMCID: PMC10880055 DOI: 10.1021/acs.inorgchem.2c04106] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/21/2022] [Indexed: 02/23/2023]
Abstract
The organic molecule 2-(1-phenyl-1-(pyridin-2-yl)ethyl)-6-(3-(1-phenyl-1-(pyridin-2-yl)ethyl)phenyl)pyridine (H3L) has been designed, prepared, and employed to synthesize the encapsulated-type pseudo-tris(heteroleptic) iridium(III) derivative Ir(κ6-fac-C,C',C″-fac-N,N',N″-L). Its formation takes place as a result of the coordination of the heterocycles to the iridium center and the ortho-CH bond activation of the phenyl groups. Dimer [Ir(μ-Cl)(η4-COD)]2 is suitable for the preparation of this compound of class [Ir(9h)] (9h = 9-electron donor hexadentate ligand), but Ir(acac)3 is a more appropriate starting material. Reactions were carried out in 1-phenylethanol. In contrast to the latter, 2-ethoxyethanol promotes the metal carbonylation, inhibiting the full coordination of H3L. Complex Ir(κ6-fac-C,C',C″-fac-N,N',N″-L) is a phosphorescent emitter upon photoexcitation, which has been employed to fabricate four yellow emitting devices with 1931 CIE (x:y) ∼ (0.52:0.48) and a maximum wavelength at 576 nm. These devices display luminous efficacies, external quantum efficiencies, and power efficacies at 600 cd m-2, which lie in the ranges 21.4-31.3 cd A-1, 7.8-11.3%, and 10.2-14.1 lm W1-, respectively, depending on the device configuration.
Collapse
|
25
|
Osmathiazole Ring: Extrapolation of an Aromatic Purely Organic System to Organometallic Chemistry. Organometallics 2023; 42:327-338. [PMID: 38601006 PMCID: PMC11005464 DOI: 10.1021/acs.organomet.2c00631] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/19/2022] [Indexed: 02/11/2023]
Abstract
An osmathiazole skeleton has been generated starting from the cation of the salt [OsH(OH)(≡CPh)(IPr)(PiPr3)]OTf (1; IPr = 1,3-bis(2,6-diisopropylphenyl)imidazolylidene; OTf = CF3SO3) and thioacetamide; its aromaticity degree was compared with that of thiazole, and its aromatic reactivity was confirmed through a reaction with phenylacetylene. Salt 1 reacts with the thioamide to initially afford the synthetic intermediate [OsH{κ2-N,S-[NHC(CH3)S]}(≡CPh)(IPr)(PiPr3)]OTf (2). Thioamidate and alkylidyne ligands of 2 couple in acetonitrile at 70 °C, forming a 1:1 mixture of the salts [OsH{κ2-C,S-[C(Ph)NHC(CH3)S]}(CH3CN)(IPr)(PiPr3)]OTf (3) and [Os{κ2-C,S-[CH(Ph)NHC(CH3)S]}(CH3CN)3(IPr)]OTf (4). Treatment of 3 with potassium tert-butoxide produces the NH-deprotonation of its five-membered ring and gives OsH{κ2-C,S-[C(Ph)NC(CH3)S]}(IPr)(PiPr3) (5). The osmathiazole ring of 5 is slightly less aromatic than the osmathiazolium cycle of 3 and the purely organic thiazole. However, it is more aromatic than related osmaoxazoles and osmaoxazoliums. There are significant differences in behavior between 3 and 5 toward phenylacetylene. In acetonitrile, the cation of 3 loses the phosphine and adds the alkyne to afford [Os{η3-C3,κ1-S-[CH2C(Ph)C(Ph)NHC(CH3)S]}(CH3CN)2(IPr)]OTf (6), bearing a functionalized allyl ligand. In contrast, the osmathiazole ring of 5 undergoes a vicarious nucleophilic substitution of hydride, by acetylide, via the dihydride OsH2(C≡CPh){κ2-C,S-[C(Ph)NC(CH3)S]}(IPr)(PiPr3) (7), which releases H2 to yield Os(C≡CPh){κ2-C,S-[C(Ph)NC(CH3)S]}(IPr)(PiPr3) (8).
Collapse
|
26
|
On Fractioning the Tire Pyrolysis Oil in a Pilot-Scale Distillation Plant under Industrially Relevant Conditions. ENERGY & FUELS : AN AMERICAN CHEMICAL SOCIETY JOURNAL 2023; 37:2886-2896. [PMID: 36827211 PMCID: PMC9940201 DOI: 10.1021/acs.energyfuels.2c03850] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/14/2022] [Revised: 01/20/2023] [Indexed: 06/18/2023]
Abstract
Tire pyrolysis oil (TPO) is one of the most interesting products derived from the pyrolysis of end-of-life tires. Among others, it contains valuable chemicals, such as benzene, toluene, ethylbenzene, and xylene (BTEX), as well as limonene. In order to recover these chemicals, a pilot-scale distillation plant has been designed, erected, and operated using TPO derived from an industrial-scale pyrolysis plant. The distillation facility consists of a packed column (20 kg/h) and is within the fifth technological readiness level. This work describes for the first time the fractioning of the TPO in a continuous operational mode under industrially relevant conditions. For this purpose, different reboiler temperatures (250-290 °C) and reflux ratios (up to 2.4) were preliminarily assessed on the yields and properties of the resulting products: light fraction (LF) and heavy fraction (HF). Thus, the distillation plant is capable of producing 27.0-36.7 and 63.3-73.0 wt % of LF and HF, respectively. The highest BTEX concentration in the LF (55.2 wt %) was found using a reboiler temperature of 250 °C and a reflux ratio of 2.4. Contrarily, the highest limonene concentration (4.9 wt %) in the LF was obtained at 290 °C in the reboiler without reflux. In this sense, the lower the reboiler temperature, the higher the BTEX, and the lower the limonene concentration in the LF. The main results herein obtained serve to gain key insights to operate packed distillation columns using complex and promising hydrocarbons as TPO in order to recover valuable products. In addition, this work provides significant information for optimizing the recovery efficiencies of both BTEX and limonene, as well as their potential applications including that for the resulting HF.
Collapse
|
27
|
Tuning of Mechanical Properties in Photopolymerizable Gelatin-Based Hydrogels for In Vitro Cell Culture Systems. ACS APPLIED POLYMER MATERIALS 2023; 5:1487-1498. [PMID: 36817339 PMCID: PMC9926877 DOI: 10.1021/acsapm.2c01980] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/16/2022] [Accepted: 01/16/2023] [Indexed: 06/12/2023]
Abstract
The mechanical microenvironment plays a crucial role in the evolution of colorectal cancer, a complex disease characterized by heterogeneous tumors with varying elasticity. Toward setting up distinct scenarios, herein, we describe the preparation and characterization of gelatin methacrylamide (GelMA)-based hydrogels via two different mechanisms: free-radical photopolymerization and photo-induced thiol-ene reaction. A precise stiffness modulation of covalently crosslinked scaffolds was achieved through the application of well-defined irradiation times while keeping the intensity constant. Besides, the incorporation of thiol chemistry strongly increased stiffness with low to moderate curing times. This wide range of finely tuned mechanical properties successfully covered from healthy tissue to colorectal cancer stages. Hydrogels prepared in phosphate-buffered saline or Dulbecco's modified Eagle's medium resulted in different mechanical and swelling properties, although a similar trend was observed for both conditions: thiol-ene systems exhibited higher stiffness and, at the same time, higher swelling capacity than free-radical photopolymerized networks. In terms of biological behavior, three of the substrates showed good cell proliferation rates according to the formation of a confluent monolayer of Caco-2 cells after 14 days of cell culture. Likewise, a characteristic apical-basal polarization of cells was observed for these three hydrogels. These results demonstrate the versatility of the presented platform of biomimetic materials as in vitro cell culture scaffolds.
Collapse
|
28
|
Heparin-Coated Dendronized Hyperbranched Polymers for Antimalarial Targeted Delivery. ACS APPLIED POLYMER MATERIALS 2023; 5:381-390. [PMID: 36686062 PMCID: PMC9844211 DOI: 10.1021/acsapm.2c01553] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/06/2022] [Accepted: 12/08/2022] [Indexed: 06/17/2023]
Abstract
The rampant evolution of resistance in Plasmodium to all existing antimalarial drugs calls for the development of improved therapeutic compounds and of adequate targeted delivery strategies for them. Loading antimalarials in nanocarriers specifically targeted to the parasite will contribute to the administration of lower overall doses, with reduced side effects for the patient, and of higher local amounts to parasitized cells for an increased lethality toward the pathogen. Here, we report the development of dendronized hyperbranched polymers (DHPs), with capacity for antimalarial loading, that are coated with heparin for their specific targeting to red blood cells parasitized by Plasmodium falciparum. The resulting DHP-heparin complexes exhibit the intrinsic antimalarial activity of heparin, with an IC50 of ca. 400 nM, added to its specific targeting to P. falciparum-infected (vs noninfected) erythrocytes. DHP-heparin nanocarriers represent a potentially interesting contribution to the limited family of structures described so far for the loading and targeted delivery of current and future antimalarial compounds.
Collapse
|
29
|
Mechanism Insights into the Iridium(III)- and B(C 6F 5) 3-Catalyzed Reduction of CO 2 to the Formaldehyde Level with Tertiary Silanes. Inorg Chem 2022; 61:20216-20221. [PMID: 36472385 PMCID: PMC10468102 DOI: 10.1021/acs.inorgchem.2c03330] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/19/2022] [Indexed: 12/12/2022]
Abstract
The catalytic system [Ir(CF3CO2)(κ2-NSiMe)2] [1; NSiMe = (4-methylpyridin-2-yloxy)dimethylsilyl]/B(C6F5)3 promotes the selective reduction of CO2 with tertiary silanes to the corresponding bis(silyl)acetal. Stoichiometric and catalytic studies evidenced that species [Ir(CF3COO-B(C6F5)3)(κ2-NSiMe)2] (3), [Ir(κ2-NSiMe)2][HB(C6F5)3] (4), and [Ir(HCOO-B(C6F5)3)(κ2-NSiMe)2] (5) are intermediates of the catalytic process. The structure of 3 has been determined by X-ray diffraction methods. Theoretical calculations show that the rate-limiting step for the 1/B(C6F5)3-catalyzed hydrosilylation of CO2 to bis(silyl)acetal is a boron-promoted Si-H bond cleavage via an iridium silylacetal borane adduct.
Collapse
|
30
|
Two-Dimensional Triblock Peptide Assemblies for the Stabilization of Pickering Emulsions with pH Responsiveness. ACS APPLIED MATERIALS & INTERFACES 2022; 14:53228-53240. [PMID: 36378993 PMCID: PMC9716523 DOI: 10.1021/acsami.2c17558] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/29/2022] [Accepted: 11/02/2022] [Indexed: 06/16/2023]
Abstract
A variety of two-dimensional (2D) nanomaterials, including graphene oxide and clays, are known to stabilize Pickering emulsions to fabricate structures for functions in sensors, catalysts, and encapsulation. We introduce here a novel Pickering emulsion using self-assembled amphiphilic triblock oligoglycine as the emulsifier. Peptide amphiphiles are more responsive to environmental changes (e.g., pH, temperature, and ionic strength) than inorganic 2D materials, which have a chemically rigid, in-plane structure. Noncovalent forces between the peptide molecules change with the environment, thereby imparting responsiveness. We provide new evidence that the biantennary oligoglycine, Gly4-NH-C10H20-NH-Gly4, self-assembles into 2D platelet structures, denoted as tectomers, in solution at a neutral buffered pH using small-angle X-ray scattering and molecular dynamics simulations. The molecules are stacked in the platelets with a linear conformation, rather than in a U-shape. We discovered that the lamellar oligoglycine platelets adsorbed at an oil/water interface and stabilized oil-in-water emulsions. This is the first report of 2D oligoglycine platelets being used as a Pickering stabilizer. The emulsions showed a strong pH response in an acidic environment. Thus, upon reducing the pH, the protonation of the terminal amino groups of the oligoglycine induced disassembly of the lamellar structure due to repulsive electrostatic forces, leading to emulsion destabilization. To demonstrate the application of the material, we show that a model active ingredient, β-carotene, in the oil is released upon decreasing the pH. Interestingly, in pH 9 buffer, the morphology of the oil droplets evolved over time, as the oligoglycine stabilizer created progressively a thicker interfacial layer. This demonstration opens a new route to use self-assembled synthetic peptide amphiphiles to stabilize Pickering emulsions, which can be significant for biomedical and pharmaceutical applications.
Collapse
|
31
|
Constructing "Closed" and "Open" {Mn 8} Clusters. CRYSTAL GROWTH & DESIGN 2022; 22:4935-4940. [PMID: 35971413 PMCID: PMC9374326 DOI: 10.1021/acs.cgd.2c00489] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Use of the 1,3,5-tri(2-hydroxyethyl)-1,3,5-triazacyclohexane ligand, LH3, in manganese chemistry affords access to two structurally related {Mn8} clusters: a "closed" {MnIII 6MnII 2} puckered square wheel of formula [Mn8L2(LH)O3(OH)2(MeO)2Br(imH)(H2O)3](Br)3 (1; imH = imidazole) and an "open" {MnIII 8} rod of formula [MnΙΙΙ 8L2O4(aibH)2(aib)2(MeO)6(MeOH)2](NO3)2 (2, aibH = 2-amino-isobutyric acid). In each case the triaza ligands, L/LH, direct the formation of {Mn3} triangles with their N atoms preferentially bonding to the Jahn-Teller axes of the MnIII ions. Subsequent self-assembly is dependent on the anion of the Mn salt and the identity of the organic coligand employed-the terminally bonded imidazole and the chelating/bridging amino acid. The {Mn3} triangles fold up on themselves in 1, forming a wheel. However, the syn, syn-bridging carboxylates in 2 prevent this from happening, instead directing the formation of a linear rod. Magnetic susceptibility and magnetization measurements reveal competing ferro- and antiferromagnetic interactions in both complexes, the exchange being somewhat weaker in 1 due to the presence of MnII ions.
Collapse
|
32
|
Hybrid Antimicrobial Films Containing a Polyoxometalate-Ionic Liquid. ACS APPLIED POLYMER MATERIALS 2022; 4:4144-4153. [PMID: 35720671 PMCID: PMC9194901 DOI: 10.1021/acsapm.2c00110] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/19/2022] [Accepted: 04/02/2022] [Indexed: 05/30/2023]
Abstract
The increasing resistance of pathogenic microorganisms against common treatments requires innovative concepts to prevent infection and avoid long-term microbe viability on commonly used surfaces. Here, we report the preparation of a hybrid antimicrobial material based on the combination of microbiocidal polyoxometalate-ionic liquids (POM-ILs) and a biocompatible polymeric support, which enables the development of surface coatings that prevent microbial adhesion. The composite material is based on an antibacterial and antifungal room-temperature POM-IL composed of guanidinium cations (N,N,N',N'-tetramethyl-N″, N″-dioctylguanidinum) combined with lacunary Keggin-type polyoxotungstate anions, [α-SiW11O39]8-. Integration of the antimicrobial POM-IL into the biocompatible, flexible, and stable polymer poly(methyl methacrylate) (PMMA) results in processable films, which are suitable as surface coatings or packaging materials to limit the proliferation and spread of pathogenic microorganisms (e.g., on public transport and hospital surfaces, or in ready-to-eat-food packaging).
Collapse
|
33
|
Influence of the Surface Chemistry of Metal-Organic Polyhedra in Their Assembly into Ultrathin Films for Gas Separation. ACS APPLIED MATERIALS & INTERFACES 2022; 14:27495-27506. [PMID: 35657142 PMCID: PMC9204701 DOI: 10.1021/acsami.2c06123] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 04/07/2022] [Accepted: 05/24/2022] [Indexed: 06/15/2023]
Abstract
The formation of ultrathin films of Rh-based porous metal-organic polyhedra (Rh-MOPs) by the Langmuir-Blodgett method has been explored. Homogeneous and dense monolayer films were formed at the air-water interface either using two different coordinatively alkyl-functionalized Rh-MOPs (HRhMOP(diz)12 and HRhMOP(oiz)12) or by in situ incorporation of aliphatic chains to the axial sites of dirhodium paddlewheels of another Rh-MOP (OHRhMOP) at the air-liquid interface. All these Rh-MOP monolayers were successively deposited onto different substrates in order to obtain multilayer films with controllable thicknesses. Aliphatic chains were partially removed from HRhMOP(diz)12 films post-synthetically by a simple acid treatment, resulting in a relevant modification of the film hydrophobicity. Moreover, the CO2/N2 separation performance of Rh-MOP-supported membranes was also evaluated, proving that they can be used as selective layers for efficient CO2 separation.
Collapse
|
34
|
Iron Speciation in Animal Tissues Using AC Magnetic Susceptibility Measurements: Quantification of Magnetic Nanoparticles, Ferritin, and Other Iron-Containing Species. ACS APPLIED BIO MATERIALS 2022; 5:1879-1889. [PMID: 35179873 PMCID: PMC9115797 DOI: 10.1021/acsabm.1c01200] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/25/2021] [Accepted: 02/06/2022] [Indexed: 12/19/2022]
Abstract
The simultaneous detection and quantification of several iron-containing species in biological matrices is a challenging issue. Especially in the frame of studies using magnetic nanoparticles for biomedical applications, no gold-standard technique has been described yet and combinations of different techniques are generally used. In this work, AC magnetic susceptibility measurements are used to analyze different organs from an animal model that received a single intratumor administration of magnetic nanoparticles. The protocol used for the quantification of iron associated with the magnetic nanoparticles is carefully described, including the description of the preparation of several calibration standard samples of nanoparticle suspensions with different degrees of dipolar interactions. The details for the quantitative analysis of other endogenous iron-containing species such as ferritin or hemoglobin are also described. Among the advantages of this technique are that tissue sample preparation is minimal and that large amounts of tissue can be characterized each time (up to hundreds of milligrams). In addition, the very high specificity of the magnetic measurements allows for tracking of the nanoparticle transformations. Furthermore, the high sensitivity of the instrumentation results in very low limits of detection for some of the iron-containing species. Therefore, the presented technique is an extremely valuable tool to track iron oxide magnetic nanoparticles in samples of biological origin.
Collapse
|
35
|
A Collision Cross Section Database for Extractables and Leachables from Food Contact Materials. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2022; 70:4457-4466. [PMID: 35380813 PMCID: PMC9011387 DOI: 10.1021/acs.jafc.2c00724] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/11/2023]
Abstract
The chemicals in food contact materials (FCMs) can migrate into food and endanger human health. In this study, we developed a database of traveling wave collision cross section in nitrogen (TWCCSN2) values for extractables and leachables from FCMs. The database contains a total of 1038 TWCCSN2 values from 675 standards including those commonly used additives and nonintentionally added substances in FCMs. The TWCCSN2 values in the database were compared to previously published values, and 85.7, 87.7, and 64.9% [M + H]+, [M + Na]+, and [M - H]- adducts showed deviations <2%, with the presence of protomers, post-ion mobility spectrometry dissociation of noncovalent clusters and inconsistent calibration are possible sources of CCS deviations. Our experimental TWCCSN2 values were also compared to CCS values from three prediction tools. Of the three, CCSondemand gave the most accurate predictions. The TWCCSN2 database developed will aid the identification and differentiation of chemicals from FCMs in targeted and untargeted analysis.
Collapse
|
36
|
Atomic and Specificity Details of Mucin 1 O-Glycosylation Process by Multiple Polypeptide GalNAc-Transferase Isoforms Unveiled by NMR and Molecular Modeling. JACS AU 2022; 2:631-645. [PMID: 35373202 PMCID: PMC8969996 DOI: 10.1021/jacsau.1c00529] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/23/2021] [Indexed: 05/10/2023]
Abstract
The large family of polypeptide GalNAc-transferases (GalNAc-Ts) controls with precision how GalNAc O-glycans are added in the tandem repeat regions of mucins (e.g., MUC1). However, the structural features behind the creation of well-defined and clustered patterns of O-glycans in mucins are poorly understood. In this context, herein, we disclose the full process of MUC1 O-glycosylation by GalNAc-T2/T3/T4 isoforms by NMR spectroscopy assisted by molecular modeling protocols. By using MUC1, with four tandem repeat domains as a substrate, we confirmed the glycosylation preferences of different GalNAc-Ts isoforms and highlighted the importance of the lectin domain in the glycosylation site selection after the addition of the first GalNAc residue. In a glycosylated substrate, with yet multiple acceptor sites, the lectin domain contributes to orientate acceptor sites to the catalytic domain. Our experiments suggest that during this process, neighboring tandem repeats are critical for further glycosylation of acceptor sites by GalNAc-T2/T4 in a lectin-assisted manner. Our studies also show local conformational changes in the peptide backbone during incorporation of GalNAc residues, which might explain GalNAc-T2/T3/T4 fine specificities toward the MUC1 substrate. Interestingly, we postulate that a specific salt-bridge and the inverse γ-turn conformation of the PDTRP sequence in MUC1 are the main structural motifs behind the GalNAc-T4 specificity toward this region. In addition, in-cell analysis shows that the GalNAc-T4 isoform is the only isoform glycosylating the Thr of the immunogenic epitope PDTRP in vivo, which highlights the relevance of GalNAc-T4 in the glycosylation of this epitope. Finally, the NMR methodology established herein can be extended to other glycosyltransferases, such as C1GalT1 and ST6GalNAc-I, to determine the specificity toward complex mucin acceptor substrates.
Collapse
|
37
|
Mesoporous Sn-In-MCM-41 Catalysts for the Selective Sugar Conversion to Methyl Lactate and Comparative Life Cycle Assessment with the Biochemical Process. ACS SUSTAINABLE CHEMISTRY & ENGINEERING 2022; 10:2868-2880. [PMID: 35281211 PMCID: PMC8906110 DOI: 10.1021/acssuschemeng.1c04655] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/12/2021] [Revised: 02/03/2022] [Indexed: 06/14/2023]
Abstract
The use of biomass for the production of energy and higher added value products is a topic of increasing interest in line with growing environmental concerns and circular economy. Mesoporous material Sn-In-MCM-41 was synthesized for the first time and used as a catalyst for the transformation of sugars to methyl lactate (ML). This catalyst was characterized in depth by various techniques and compared with Sn-MCM-41 and In-MCM-41 catalysts. In the new Sn-In-MCM-41 material, both metals, homogeneously distributed throughout the mesoporous structure of MCM-41, actuate in a cooperative way in the different steps of the reaction mechanism. As a result, yields to ML of 69.4 and 73.9% in the transformation of glucose and sucrose were respectively reached. In the case of glucose, the ML yield 1.5 and 2.6 times higher than those of Sn-MCM-41 and In-MCM-41 catalysts, respectively. The Sn-In-MCM-41 catalyst was reused in the transformation of glucose up to four cycles without significant loss of catalytic activity. Finally, life cycle assessment comparison between chemical and biochemical routes to produce ML allowed us to conclude that the use of Sn-In-MCM-41 reduces the environmental impacts compared to Sn-MCM-41. Nevertheless, to make the chemical route comparable to the biochemical one, improvements in the catalyst and ML synthesis have to be achieved.
Collapse
|
38
|
Design of Glycerol-Based Solvents for the Immobilization of Palladium Nanocatalysts: A Hydrogenation Study. ACS SUSTAINABLE CHEMISTRY & ENGINEERING 2021; 9:6875-6885. [PMID: 35284199 PMCID: PMC8908245 DOI: 10.1021/acssuschemeng.1c01694] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/12/2021] [Revised: 04/16/2021] [Indexed: 05/17/2023]
Abstract
Twenty-one green solvents, including glycerol-derived ethers, and their eutectic mixtures with two renewable ammonium salts, were used for the straightforward synthesis, stabilization, and immobilization of palladium nanoparticles (Pd NPs). The nature of the solvent allows tuning of the characteristics and properties of resulting catalytic systems in terms of particle size and morphology, stability, reactivity, and recoverability. Pd NPs immobilized in glycerol-based solvents were applied in the catalytic hydrogenation of alkenes, alkynes, and carbonyl compounds, as well as in the selective semihydrogenation of alkynes to alkenes. The optimal experimental parameters and the influence on the reactivity of the physicochemical properties of solvent, mainly the viscosity, were studied. Moreover, the most active and recoverable catalytic system, Pd NPs/N00Cl-100, was fully characterized both in the liquid phase and in the solid state, and its deactivation upon recovery was analyzed.
Collapse
|
39
|
Experimental Study of the Pyrolysis of NH 3 under Flow Reactor Conditions. ENERGY & FUELS : AN AMERICAN CHEMICAL SOCIETY JOURNAL 2021; 35:7193-7200. [PMID: 35673549 PMCID: PMC9165062 DOI: 10.1021/acs.energyfuels.0c03387] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/09/2020] [Revised: 01/12/2021] [Indexed: 06/15/2023]
Abstract
The possibility of using ammonia (NH3), as a fuel and as an energy carrier with low pollutant emissions, can contribute to the transition to a low-carbon economy. To use ammonia as fuel, knowledge about the NH3 conversion is desired. In particular, the conversion of ammonia under pyrolysis conditions could be determinant in the description of its combustion mechanism. In this work, pyrolysis experiments of ammonia have been performed in both a quartz tubular flow reactor (900-1500 K) and a non-porous alumina tubular flow reactor (900-1800 K) using Ar or N2 as bath gas. An experimental study of the influence of the reactor material (quartz or alumina), the bulk gas (N2 or Ar), the ammonia inlet concentration (1000 and 10 000 ppm), and the gas residence time [2060/T (K)-8239/T (K) s] on the pyrolysis process has been performed. After the reaction, the resulting compounds (NH3, H2, and N2) are analyzed in a gas chromatograph/thermal conductivity detector chromatograph and an infrared continuous analyzer. Results show that H2 and N2 are the main products of the thermal decomposition of ammonia. Under the conditions of the present work, differences between working in a quartz or non-porous alumina reactor are not significant under pyrolysis conditions for temperatures lower than 1400 K. Neither the bath gas nor the ammonia inlet concentration influence the ammonia conversion values. For a given temperature and under all conditions studied, conversion of ammonia increases with an increasing gas residence time, which results into a narrower temperature window for NH3 conversion.
Collapse
|
40
|
Polyamide-MIL-101(Cr) Thin Films Synthesized on Either the Outer or Inner Surfaces of a Polysulfone Hollow Fiber for Water Nanofiltration. ACS APPLIED MATERIALS & INTERFACES 2021; 13:7773-7783. [PMID: 33534556 PMCID: PMC8892444 DOI: 10.1021/acsami.0c21571] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
High-performance thin film nanocomposite (TFN) hollow fiber (HF) membranes, with MIL-101(Cr) MOF nanoparticles (52 ± 13 nm) embedded, have been synthesized with the polyamide layer formed either on the outer or inner surface of a polysulfone HF (250 and 380 μm ID and OD, respectively). The TFN_out membrane was developed using the conventional interfacial polymerization method, typically applied to obtain TFN flat membranes (MOF particles added to the thin layer by deposition). This membrane gave a water permeance value of 1.0 ± 0.7 L·m-2·h-1·bar-1 and a rejection of 90.9 ± 1.2% of acridine orange (AO, 265 Da). In contrast, the TFN_in membrane was synthesized by microfluidic means and gave a significantly higher water permeance of 2.8 ± 0.2 L·m-2·h-1·bar-1 and a slightly lower rejection of 87.4 ± 2.5% of the same solute. This remarkable increase of flux obtained with small solute AO suggests that the HF membranes developed in this work would exhibit good performance with other typical solutes with higher molecular weight than AO. The differences between the performances of both TFN_in and TFN_out membranes lay on the distinct superficial physicochemical properties of the support, the synthesis method, and the different concentrations of MOF present in the polyamide films of both membranes. The TFN_in is more desirable due to its potential advantages, and more effortless scalability due to the microfluidic continuous synthesis. In addition, the TFN_in membrane needs much fewer quantities of reactants to be synthesized than the TFN_out or the flat membrane version.
Collapse
|
41
|
Strain-Mediated Giant Magnetoelectric Coupling in a Crystalline Multiferroic Heterostructure. ACS APPLIED MATERIALS & INTERFACES 2021; 13:6778-6784. [PMID: 33502171 PMCID: PMC8483440 DOI: 10.1021/acsami.0c18777] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/19/2020] [Accepted: 01/19/2021] [Indexed: 06/12/2023]
Abstract
Multiferroic heterostructures based on the strain-mediated mechanism present ultralow heat dissipation and large magnetoelectric coupling coefficient, two conditions that require endless improvement for the design of fast nonvolatile random access memories with reduced power consumption. This work shows that a structure consisting of a [Pb(Mg1/3Nb2/3)O3]0.7-[PbTiO3]0.3 (001) substrate on which a crystalline FeGa(001)/MgO(001) bilayer is deposited exhibits a giant magnetoelectric coupling coefficient of order 15 × 10-6 s m-1 at room temperature. That result is a 2-fold increment over the previous highest value. The spatial orientation of the magnetization vector in the epitaxial FeGa film is switched 90° with the application of electric field. The symmetry of the magnetic anisotropy is studied by the angular dependence of the remanent magnetization, demonstrating that poling the sample generates a switchable uniaxial magnetoelastic anisotropy in the film that overcomes the native low 4-fold magnetocrystalline anisotropy energy. Magnetic force microscopy shows that the switch of the easy axis activates the displacement of domain walls and the domain structures remain stable after that point. This result highlights the interest in single-crystalline structures including materials with large magnetoelastic coupling and small magnetocrystalline anisotropy for low-energy-consuming spintronic applications.
Collapse
|