Ultrafine Ni-MoOx Nanoparticles Anchored on Nitrogen-Doped Carbon Nanosheets: A Highly Efficient Noble-Metal-Free Catalyst for Ammonia Borane Hydrolysis

The development of low-cost and high-efficiency catalysts for the hydrolytic dehydrogenation of ammonia borane (AB, NH3BH3) is still a challenging technology. Herein, ultrafine MoOx-doped Ni nanoparticles (~3.0 nm) were anchored on g-C3N4@glucose-derived nitrogen-doped carbon nanosheets via a phosphate-mediated method. The strong adsorption of phosphate-mediated nitrogen-doped carbon nanosheets (PNCS) for metal ions is a key factor for the preparation of ultrasmall Ni nanoparticles (NPs). Notably, the alkaline environment formed by the reduction of metal ions removes the phosphate from the PNCS surface to generate P-free (P)NCS so that the phosphate does not participate in the subsequent catalytic reaction. The synthesized Ni-MoOx/(P)NCS catalysts exhibited outstanding catalytic properties for the hydrolysis of AB, with a high turnover frequency (TOF) value of up to 85.7 min-1, comparable to the most efficient noble-metal-free catalysts and commercial Pt/C catalyst ever reported for catalytic hydrogen production from AB hydrolysis. The superior performance of Ni-MoOx/(P)NCS can be ascribed to its well-dispersed ultrafine metal NPs, abundant surface basic sites, and electron-rich nickel species induced by strong electronic interactions between Ni-MoOx and (P)NCS. The strategy of combining multiple modification measures adopted in this study provides new insights into the development of economical and high-efficiency noble-metal-free catalysts for energy catalysis applications.

Supplementation of hyaluronic acid injections with vitamin D improve knee function by attenuating synovial fluid oxidative stress in osteoarthritis patients with vitamin D insufficiency

Objectives

There is still controversy about the effect of vitamin D supplementation on osteoarthritis (OA). The purpose of this study was to investigate the effects of vitamin D supplementation with Hyaluronic acid (HA) injection on OA.

Methods

We investigated serum vitamin D levels and oxidative stress (OS) in synovial fluid from patients with OA who underwent total knee arthroplasty (grade IV, n = 24) and HA injection (grade II and III, n = 40). The effects of HA injection with or without oral vitamin D supplementation on synovial fluid OS and knee pain and function were then further investigated. Finally, patients underwent HA injection were divided into two groups according to vitamin D levels (vitamin D < or > 30 ng/ml), and the efficacy of the two groups were compared.

Results

The results showed that the levels of glutathione peroxidase (GSH-PX) (P < 0.05) in the synovial fluid were lower in patients with stage IV OA than that in patients with stage II-III OA, while the levels of malondialdehyde (MDA) (P < 0.05) and lactate dehydrogenase (LDH) (P < 0.01) were significantly higher. Moreover, we found that age, BMI and vitamin D levels were significantly associated with the levels of oxidants and/or antioxidants in synovial fluid, and that vitamin D was significantly negatively correlated with BMI (R = −0.3527, p = 0.0043). Supplementation of HA injections with vitamin D significantly reduced the OS status in synovial fluid, attenuated knee pain and improved knee function in OA patients with vitamin D insufficiency.

Conclusion

We conclude that maintenance of vitamin D sufficiency may be beneficial for the treatment of OA by improving OS in synovial fluid.

The synergism of lytic polysaccharide monooxygenases with lichenase and their co-immobilization on silica nanospheres for green conversion of lichen biomass

Enzyme-assisted valorization of lichenan represents a green and sustainable alternative to the conventional chemical industry. The recently discovered lytic polysaccharide monooxygenases (LPMOs) are essential components of state-of-the-art enzyme cocktails for lichenin bioconversion. The LPMOs named SpyTag fused LPMOs (AST) from Chaetomium globosum was functionally expressed in E. coli and exhibited 1.25-fold synergism with lichenase, whereas AST alone produced no detectable reducing sugars. HPLC results further confirm that AST does not alter the endogenous hydrolysis mode of lichenase but rather enhances its hydrolysis efficiency by disrupting the long chain of lichenan and releasing more reducing ends. To the best of our knowledge, this was the first report on the synergistic effect of LPMOs and lichenase, which may have great synergistic potential in the conversion of lichen biomass. Furthermore, a novel strategy for the covalently immobilizing AST and lichenase on silica nanoparticles (SNPs) from the cell lysate in a single step was proposed, which exhibited high activity recovery (82.9%) and high immobilization yield (94.8%). After 12 independent runs, about 67.4 % of the initial activity of the immobilized enzymes was retained. The resulted biocatalyst systems exhibited the green and sustainable strategy in the bioconversion of lichen biomass as well as other diverse polysaccharides.

Production and purification of 2-phenylethanol by Saccharomyces cerevisiae using tobacco waste extract as a substrate

2-phenylethanol (2-PE), which is extracted naturally from plant or biotechnology processing, is widely used in the food and cosmetics industries. Due to the high cost of 2-PE production, the valorization of waste carbon to produce 2-PE has gained increasing attention. Here, 2-PE was produced by Saccharomyces cerevisiae using tobacco waste extract (TWE) as the substrate. Considering the toxicity of nicotine and its inhibition of 2-PE, the tolerance of S. cerevisiae was first evaluated. The results suggested that the production of 2-PE by S. cerevisiae in TWEs could be carried out at 2·0 mg ml-1 nicotine concentrations and may be inhibited by 1·0 mg ml-1 2-PE. Thus, the compounds in the TWEs prepared at different temperatures were detected, and the results revealed that the TWEs prepared at 140°C contained 2·18 mg ml-1 of nicotine, had total sugar concentrations of 26·8 mg ml-1 and were suitable for 2-PE production. Due to feedback regulation, the 2-PE production was only 1·11 mg ml-1 , and the remaining glucose concentration remained at 13·78 mg ml-1 , which indicated insufficient glucose utilization. Then, in situ product recovery was further implemented to remove this inhibition; the glucose utilization (the remaining concentration decreased to 3·64 mg ml-1 ) increased, and the 2-PE production increased to 1·65 mg ml-1 . The 2-PE produced in the fermentation broth was first isolated by elution from the resin with 75% ethanol and then by removing the impurities with 2·5% activated charcoal, and pure 2-PE was identified by gas chromatography mass spectrometry. The results of this study suggest that TWE could be an alternative carbon source for 2-PE production. This could provide an outlet tobacco waste as well as reducing the price of natural 2-PE, although more strategies need to be explored to improve the production yield of 2-PE by using TWE.

Ergonomic risk exposure and work ability among young dental professionals in China: A cross-sectional study

BACKGROUND

Exposure to high ergonomic risk resulted in an increasing prevalence of musculoskeletal disorders among dental professional. However, little is known about the high exposure risk impact on work ability among dental professionals.

OBJECTIVE

We conducted a cross-sectional study to examine the association between ergonomic risk exposure and work ability among young dental professionals in their early careers.

METHODS

A total of 230 dental professionals including dentists, dental assistants, and nurses were clustered sampled from three hospitals in Guangzhou, south of China. We used the Quick Ergonomic Check (QEC) to assess participants' ergonomic risk exposure and Work Ability Index (WAI) to evaluate their work ability. Demographics and other factors related with WAI were also included in the data collection. Multiple linear regression was applied to analyze the association between ergonomic exposure scores and WAI.

RESULTS

A total of 218 participants (94.8%) had valid data and consent forms. The participants' average WAI was 39.6, of which the poor and moderate WAI composed 31%. High and very high ergonomic risk exposure level was 45.9% for the neck and 21.1% for the wrist/hand. In general, WAI decreased with higher ergonomic exposure level. With adjustment of other potential risk factors, the ergonomic scores for wrist/hand and total scores for the whole body were significantly associated with the decreased WAI.

CONCLUSION

High ergonomic risk exposure might risk in reducing work ability among young dental professionals. Intervention measures toward ergonomic risk should be taken to prevent WAI from decreasing in their early careers.