Neurospora sp. Mediated Synthesis of Naringenin for the Production of Bioactive Nanomaterials

The application of Neurospora sp., a fungus that commonly thrives on complex agricultural and plant wastes, has proven successful in utilizing citrus peel waste as a source of naringin. A UV-Vis spectrophotometric method proved the biotransformation of naringin, with an absorption maximum (λmax) observed at 310 nm for the biotransformed product, naringenin (NAR). Further verification of the conversion of naringin was provided through thin layer chromatography (TLC). The Neurospora crassa mediated biotransformation of naringin to NAR was utilized for the rapid (within 5 min) synthesis of silver (Ag) and gold (Au) nanoconjugates using sunlight to accelerate the reaction. The synthesized NAR-nano Ag and NAR-nano Au conjugates exhibited monodispersed spherical and spherical as well as polygonal shaped particles, respectively. Both of the nanoconjugates showed average particle sizes of less than 90 nm from TEM analysis. The NAR-Ag and NAR-Au nanoconjugates displayed potential enhancement of the antimicrobial activities, including antibacterial and nematicidal properties over either standalone NAR or Ag or Au NPs. This study reveals the potential of naringinase-producing Neurospora sp. for transforming naringin into NAR. Additionally, the resulting NAR-Ag and NAR-Au nanoconjugates showed promise as sustainable antibiotics and biochemical nematicides.

Enhanced carbon dioxide adsorption and carrier separation over amine functionalized zirconium metal organic framework/gold/indium oxide for boosting photocatalytic carbon dioxide reduction

Photocatalytic CO2 conversion is a prospective way to mitigate greenhouse effect. In2O3 is widely used in the resource conversion of CO2, but still exists a few drawbacks containing limited CO2 capture and activation, narrow light absorption range, low charge separation and utilization. To overcome these disadvantages, an NH2-UiO-66/Au/In2O3 composite photocatalyst is built, with Au nanoparticles and NH2-UiO-66 decorated on the surface of In2O3 nanorods. Significantly, the improved carrier separation ability is attributed to the Schottky junction at the Au/In2O3 interface and the heterostructure between In2O3 and NH2-UiO-66. And the widened light absorption is attributed to the plasmon effect caused by Au nanoparticles. Moreover, the increase of CO2 adsorption and activation is mainly due to the porosity of NH2-UiO-66, thereby greatly improving photocatalytic CO2RR efficiency of NH2-UiO-66/Au/In2O3 nanorods. The CO yield of NH2-UiO-66/Au/In2O3 is 8.56 μmol g-1 h-1, which is nearly 45 times that of In2O3. This work will present a novel idea to design high-efficient composite photocatalysts for CO2 reduction by multifunctional component synergistic enhancement.

The Effect of d10 Precious Elements on Structural, Magnetic and Elastic Properties of MnPt Alloy: A First-Principles Study

MnPt's exceptional stability and extremely high Néel temperature have generated a lot of interest in data storage applications. Previously, it was reported experimentally that the MnPt alloy shows ferromagnetic (FM) behavior at room temperature. In this study, the effects of partial substitution of Pt with Pd, Au, and Ag on magnetic properties is investigated using density functional theory. The stability of Mn50Pt50-xMx (M = Pd, Au, Ag, x = 6.25, 12.5, 18.75) alloys was assessed by determining their thermodynamic, magnetic, and mechanical properties. The calculated lattice constants of Mn50Pt50 agree well with available theoretical results. The Mn50Pt50-xMx alloys' formability was assessed by measuring the thermodynamic stability using the heat of formation. It was found that B2 Mn50Pt50-xPdx alloys (0 ≤ x ≤ 18.75) are thermodynamically stable due to the negative heat of formation close to that of a pristine MnPt alloy. Based on the elasticity results, the B2 Mn50Pt50-xPdx is most likely to undergo martensitic transformation for the entire considered composition range. From the calculated values of the Poisson's ratio, it is shown that an increase in Pd, Ag, and Au effectively improves the ductility of the B2 Mn50Pt50-xMx compounds. It was revealed that ferromagnetism is maintained with Pd addition but significantly reduced in the case of Au and Ag. Thus, this work showed that density functional theory can be exploited to propose new possible compositions for future magnets in spintronic applications.

Enabling Specific Benzene Oxidation by Tuning the Adsorption Behavior on Au Loaded MgAl Layered Double Hydroxides

Direct and selective oxidation of benzene to phenol is a long-term goal in industry. Although great efforts have been made in homogenous catalysis, it still remains a huge challenge to drive this reaction via heterogeneous catalysts under mild conditions. Herein, a single-atom Au loaded MgAl-layered double hydroxide (Au1 -MgAl-LDH) with a well-defined structure, in which the Au single atoms are located on the top of Al3+ with Au-O4 coordination as revealed by extended x-ray-absorption fine-structure (EXAFS)and density-functional theory (DFT)calculation is reported. The photocatalytic results prove the Au1 -MgAl-LDH is capable of driving benzene oxidation reaction with O2 in water, and exhibits a high selectivity of 99% for phenol. While contrast experiment shows a ≈99% selectivity for aliphatic acid with Au nanoparticle loaded MgAl-LDH (Au-NP-MgAl-LDH). Detailed characterizations confirm that the origin of the selectivity difference can be attributed to the profound adsorption behavior of substrate benzene with Au single atoms and nanoparticles. For Au1 -MgAl-LDH, single Au-C bond is formed in benzene activation and result in the production of phenol. While for Au-NP-MgAl-LDH, multiple AuC bonds are generated in benzene activation, leading to the crack of CC bond.

Plasmonic Nanocrystal Assembly-Semiconductor Hybrids for Boosting Visible to Near-Infrared Photocatalysis

Plasmonic metal-semiconductor hybrid photocatalysts have received much attention because of their wide light harvesting range and efficient charge carrier generation capability originating from plasmon energy transfer. Here, we introduce a plasmonic metal-semiconductor hybrid nanostructure consisting of a Au core-satellite assembly and crystalline TiO2. The formation of Au@TiO2-Au core-satellite assemblies using TiO2 as a spacer and the subsequent growth of outer TiO2 shells on the core-satellite assemblies, followed by calcination, successfully generated Au core-satellite assembly@TiO2 nanostructures. Exquisite control over the growth of the TiO2 interlayer enabled the regulation of the gap distance between the core and satellite Au nanocrystals within the same hybrid morphology. Due to the structural controllability of the present approach, the gap-distance-dependent plasmonic and photocatalytic properties of the hybrid nanostructures could be explored. The nanostructures possessing the most closely arranged Au nanocrystals showed high photocatalytic activity under visible to near-infrared light irradiation, which can be attributed to strong plasmon coupling between the core and satellite Au nanocrystals that can expedite the formation of intense plasmon energy and its transfer to TiO2.

Antifungal Effect of Polymethyl Methacrylate Resin Base with Embedded Au Nanoparticles

Full and partial restorations in dentistry must replicate the characteristics of the patient's natural teeth. Materials must have good mechanical properties and be non-toxic and biocompatible. Microbes, which can form biofilms, are constantly in contact with restorations. In this study, we investigate how well Candida albicans adheres to a polymethyl methacrylate (PMMA) resin base with gold (Au) nanoparticles. We synthesized Au nanoparticles and characterized them. The average size of Au nanoparticles embedded in PMMA was 11 nm. The color difference ΔE between PMMA and PMMA/Au composites was 2.7 and was still esthetically acceptable to patients. PMMA/Au surfaces are smoother and more hydrophilic than pure PMMA surfaces, and the isoelectric point of both types of surfaces was 4.3. Above the isoelectric point, PMMA/Au surfaces are more negatively charged than PMMA surfaces. The added Au nanoparticles decreased the tensile strength, while the hardness did not change significantly. Adhesion measurements showed that PMMA surfaces modified with Au nanoparticles reduced the extent of microbial adhesion of Candida albicans.

Differentiation Induction of Mesenchymal Stem Cells by a Au Delivery Platform

Au decorated with type I collagen (Col) was used as a core material to cross-link with stromal cell-derived factor 1α (SDF1α) in order to investigate biological performance. The Au-based nanoparticles were subjected to physicochemical determination using scanning electron microscopy (SEM), dynamic light scattering (DLS) and ultraviolet-visible (UV-Vis) and Fourier-transform infrared spectroscopy (FTIR). Mesenchymal stem cells (MSCs) were used to evaluate the biocompatibility of this nanoparticle using the MTT assay and measuring reactive oxygen species (ROS) production. Also, the biological effects of the SDF-1α-conjugated nanoparticles (Au-Col-SDF1α) were assessed and the mechanisms were explored. Furthermore, we investigated the cell differentiation-inducing potential of these conjugated nanoparticles on MSCs toward endothelial cells, neurons, osteoblasts and adipocytes. We then ultimately explored the process of cell entry and transportation of the nanoparticles. Using a mouse animal model and retro-orbital sinus injection, we traced in vivo biodistribution to determine the biosafety of the Au-Col-SDF1α nanoparticles. In summary, our results indicate that Au-Col is a promising drug delivery system; it can be used to carry SDF1α to improve MSC therapeutic efficiency.

Controllable assembly of three-dimensional porous graphene-Au dual aerogels and its application for high-efficient bioelectrocatalytic O2 reduction

Aerogels derived from the colloidal nanoparticles featured with hierarchical interconnected pore-rich networks guarantee their great potentials in various applications. Herein, the controllable assembly of three-dimensional aerogels based on Au nanoparticles (Au NPs) and reduced graphene oxide (rGO) nanosheets as building blocks via a bottom-up approach have been systematically clarified. The difference of building blocks and their assembly sequence were crucially to the final aerogel morphologies and electrochemical properties. Specifically, the highly porous graphene-gold dual aerogels (rGO-Au DAGs) with interconnected rGO nanosheets and Au nanowires showed high conductivity, large surface area and good biocompatibility. Thus, it was employed as an excellent matrix to immobilize enzyme for high-efficient bioelectrocatalysis. Taking bilirubin oxidase as an example, a more positive on-set potential (0.60 V) and a larger catalytic current density (0.77 mA cm^-2@0.40 V) than those of other rGO-Au assemblies were achieved for direct bioelectrocatalytic O₂ reduction. This study will provide an efficient strategy for unique dual-structural aerogels design and shed light to develop new functional materials for bioelectrocatalytic applications such as biosensors and biofuel cells.

Boosting charge-transfer in tuned Au nanoparticles on defect-rich TiO2 nanosheets for enhancing nitrogen electroreduction to ammonia production

The electrocatalytic nitrogen reduction reaction (eNRR) to ammonia (NH₃) has been recognized as an effective, carbon-neutral, and great-potential strategy for ammonia production. However, the conversion efficiency and selectivity of eNRR still face significant challenges due to the slow transfer kinetics and lack of effective N₂ adsorption and activation sites in this process. Herein, we designed and fabricated defect-rich TiO₂ nanosheets furnished with oxygen vacancies (OVs) and Au nanoparticles (Au/TiO_2-x) as the electrocatalyst for efficient N₂-fixing. The experimental results demonstrate that OVs act as active sites, which enable efficient chemisorption and activation of N₂ molecules. The Au nanoparticles loaded on the OVs-rich TiO₂ nanosheets not only accelerate charge transfer but also change the local electronic structure, thus enhancing N₂ adsorption and activation. In this work, the optimal Au/TiO_2-x electrocatalyst displays a considerable NH₃ yield activity of 12.5 μg h^-1 mg_cat.^-1 and a faradaic efficiency (FE) of 10.2 % at -0.40 V vs reversible hydrogen electrode (RHE). More importantly, the Au/TiO_2-x exhibits a stable N₂-fixing activity in cycling and it persists even after 80 h of consecutive electrolysis. Density functional theory (DFT) calculations reveal that the OVs serve as the active sites in TiO₂, while Au nanoparticles are crucial for improving N₂ chemisorption and lowering the reaction energy barrier by facilitating the charge transfer for eNRR with a distal hydrogenation pathway. This research offers a rational catalytic site design for modulating charge transfer of active sites on metal-supported defective catalysts to boost N₂ electroreduction to NH₃.

Spatially Formed Tenacious Nickel-Supported Bimetallic Catalysts for CO2 Methanation under Conventional and Induction Heating

The paper introduces spatially stable Ni-supported bimetallic catalysts for CO₂ methanation. The catalysts are a combination of sintered nickel mesh or wool fibers and nanometal particles, such as Au, Pd, Re, or Ru. The preparation involves the nickel wool or mesh forming and sintering into a stable shape and then impregnating them with metal nanoparticles generated by a silica matrix digestion method. This procedure can be scaled up for commercial use. The catalyst candidates were analyzed using SEM, XRD, and EDXRF and tested in a fixed-bed flow reactor. The best results were obtained with the Ru/Ni-wool combination, which yields nearly 100% conversion at 248 °C, with the onset of reaction at 186 °C. When we tested this catalyst under inductive heating, the highest conversion was observed already at 194 °C.

Synthesis of Multifunctional Eu(III) Complex Doped Fe3O4/Au Nanocomposite for Dual Photo-Magnetic Hyperthermia and Fluorescence Bioimaging

In this paper, the luminescent complex Eu(3-thenoyltrifluoroacetonate)₃ was integrated with Fe₃O₄ and gold (Au) nanoparticles to form a multifunctional nanocomposite, Fe₃O₄/Au/Eu(TTA)₃ (FOASET NC), for dual magnetic-photothermal therapy and biomedical imaging. Upon functionalization with amine-NH₂, the FOASET NC exhibits a small size of 60-70 nm and strong, sharp emission at λ_max = 614 nm, enhanced by surface plasmon resonance (SPR) of Au nanoparticles that provided an effective label for HT29 colorectal cancer cells by fluorescence microscopy imaging. In addition, a hyperthermia temperature (42-46 °C) was completely achieved by using these FOASET NCs in an aqueous solution with three heating modes for (i) Magnetic therapy (MT), (ii) Photothermal therapy (PT), and (iii) Dual magnetic-photothermal therapy (MPT). The heating efficiency was improved in the dual magnetic-photothermal heating mode.

Inactivation of mammalian spermatozoa on the exposure of TiO2 nanorods deposited with noble metals

Titanium dioxide (TiO₂) nanorods (NRs) are well-known semiconducting and catalytic material that has been widely applied, but their toxicities have also attracted recent interest. In this study, we investigated and compared the toxic effects of TiO₂ NRs and TiO₂ NRs loaded with Ag or Au NPs on boar spermatozoa. As a result, sperm incubated with Ag-TiO₂ NRs showed lower motility than sperm incubated with controls (with or without TiO₂ NRs) or Au-TiO₂ NRs. In addition, sperm viability and acrosomal integrity were defective in the presence of Ag-TiO₂ NRs, and the generation of intracellular reactive oxygen species (ROS) increased significantly when spermatozoa were incubated with 20 μg/ml Ag-TiO₂ NRs. We discussed in depth the charge transfer mechanism between enzymatic NADPH and Ag-TiO₂ NRs in the context of ROS generation in spermatozoa. The effects we observed reflected the fertilization competence of sperm incubated with Ag-TiO₂ NRs; specifically sperm penetration and embryonic development rates by in vitro fertilization were reduced by Ag-TiO₂ NRs. To summarize, our findings indicate that exposure to Ag-TiO₂ NRs could affect male fertilization fecundity and caution that care be exercised when using these NRs.

Cathodoluminescence and optical absorption spectroscopy of plasmonic modes in chromium micro-rods

Manipulating light at the sub-wavelength level is a crucial feature of surface plasmon resonance (SPR) properties for a wide range of nanostructures. Noble metals like Au and Ag are most commonly used as SPR materials. Significant attention is being devoted to identify and develop non-noble metal plasmonic materials whose optical properties can be reconfigured for plasmonic response by structural phase changes. Chromium (Cr) which supports plasmon resonance, is a transition metal with shiny finished, highly non-corrosive, and bio-compatible alloys, making it an alternative plasmonic material. We have synthesized Cr micro-rods from a bi-layer of Cr/Au thin films, which evolves from face centered cubic to hexagonal close packed (HCP) phase by thermal activation in a forming gas ambient. We employed optical absorption spectroscopy and cathodoluminescence (CL) imaging spectroscopy to observe the plasmonic modes from the Cr micro-rod. The origin of three emission bands that spread over the UV-Vis-IR energy range is established theoretically by considering the critical points of the second-order derivative of the macroscopic dielectric function obtained from density functional theory (DFT) matches with interband/intraband transition of electrons observed in density of states versus energy graph. The experimentally observed CL emission peaks closely match thes-dandd-dband transition obtained from DFT calculations. Our findings on plasmonic modes in Cr(HCP) phase can expand the range of plasmonic material beyond noble metal with tunable plasmonic emissions for plasmonic-based optical technology.

Enhanced Electrochemical CO2 Reduction to Formate on Poly(4-vinylpyridine)-Modified Copper and Gold Electrodes

Developing active and selective catalysts that convert CO₂ into valuable products remains a critical challenge for further application of the electrochemical CO₂ reduction reaction (CO₂RR). Catalytic tuning with organic additives/films has emerged as a promising strategy to tune CO₂RR activity and selectivity. Herein, we report a facile method to significantly change CO₂RR selectivity and activity of copper and gold electrodes. We found improved selectivity toward HCOOH at low overpotentials on both polycrystalline Cu and Au electrodes after chemical modification with a poly(4-vinylpyridine) (P4VP) layer. In situ attenuated total reflection surface-enhanced infrared reflection-adsorption spectroscopy and contact angle measurements indicate that the hydrophobic nature of the P4VP layer limits mass transport of HCO₃^- and H₂O, whereas it has little influence on CO₂ mass transport. Moreover, the early onset of HCOOH formation and the enhanced formation of HCOOH over CO suggest that P4VP modification promotes a surface hydride mechanism for HCOOH formation on both electrodes.

Mn-doped single atom nanozyme composited Au for enhancing enzymatic and photothermal therapy

As an emerging technology, nanocatalytic medicine attracts much attention, especially the ones according to the enzymatic reaction by using excess H₂O₂ in the tumor. Among various candidates, single-atom catalyst (SAC) revealed unique and outstanding redox reaction performance, since the active sites consisting of single metal atoms may achieve the maximum utilization of metal atoms and emerge obviously amplified reaction rate. Here we developed an M-N_x (M = Mn, Zn) center-based SAC with a hollow structure by calcination of Mn²⁺-doped zeolitic imidazolate frameworks (ZIF-8), and PEGylation was applied to improve the hydrophilicity. According to the enzymatic reaction, the M-N_x (M = Mn, Zn) centers have an inherent peroxidase-like activity to catalyze over-expressed H₂O₂ in the weak acidic tumor microenvironment and generate a large amount of toxic reactive oxygen species (ROS) like hydroxyl radicals for therapy. To keep efficient therapeutic output, we integrated the hollow SAC with Au which could expend the glucose in tumor and supply H₂O₂ as the substrate of peroxidase-like activity. Better yet, Au may boost the photothermal effect of SAC and offer another non-invasive photothermal therapy (PTT) to promote the effect of tumor removal. This platform provided a new idea for the construction of more efficient peroxidase-like activity in tumor therapy.

Formation of Au, Pt, and bimetallic Au-Pt nanostructures from thermal dewetting of single-layer or bilayer thin films

Formation of Au, Pt, and bimetallic Au-Pt nanostructures by thermal dewetting of single-layer Au, Pt and bilayer Au-Pt thin films on Si substrates was systematically studied. The solid-state dewetting of both single-layer and bilayer metallic films was shown to go through heterogeneous void initiation followed by void growth via capillary agglomeration. For the single-layer of Au and Pt films, the void growth started at a temperature right above the Hüttig temperature, at which the atoms at the surface or at defects become mobile. Uniformly distributed Au (7 ± 1 nm to 33 ± 8 nm) and Pt (7 ± 1 nm) NPs with monodispersed size distributions were produced from complete dewetting achieved for thinner 1.7-5.5 nm thick Au and 1.4 nm thick Pt films, respectively. The NP size is strongly dependent on the initial thin film thickness, but less so on temperature and time. Thermal dewetting of Au-Pt bilayer films resulted in partial dewetting only, forming isolated nano-islands or large particles, regardless of sputtering order and total thin film thickness. The increased resistance to thermal dewetting shown in the Au-Pt bilayer films as compared to the individual Au or Pt layer is a reflection of the stabilizing effect that occurs upon adding Pt to Au in the bimetallic system. Energy dispersive x-ray spectroscopic analysis showed that the two metals in the bilayer films broke up together instead of dewetting individually. According to the x-ray diffraction analysis, the produced Au-Pt nanostructures are phase-segregated, consisting of an Au-rich phase and a Pt-rich phase.

Strategy for Fabricating Ultrathin Au Film Electrodes with Ultralow Optoelectrical Losses and High Stability

A vital objective in the wetting of Au deposited on chemically heterogeneous oxides is to synthesize a completely continuous, highly crystalline, ultrathin-layered geometry with minimized electrical and optical losses. However, no effective solution has been proposed for synthesizing an ideal Au-layered structure. This study presents evidence for the effectiveness of atomic oxygen-mediated growth of such an ideal Au layer by improving Au wetting on ZnO substrates with a substantial reduction in free energy. The unexpected outcome of the atomic oxygen-mediated Au growth can be attributed to the unconventional segregation and incorporation of atomic oxygen along the outermost boundaries of Au nanostructures evolving in the clustering and layering stages. Moreover, the experimental and numerical investigations revealed the spontaneous migration of atomic oxygen from an interstitial oxygen surplus ZnO bulk to the Au-ZnO interface, as well as the segregation (float-out) of the atomic oxygen toward the top Au surfaces. Thus, the implementation of a 4-nm-thick, two-dimensional, quasi-single-crystalline Au layer with a nearly complete crystalline realignment at a mild temperature (570 K) enabled exceptional optoelectrical performance with record-low resistivity (<7.5 × 10^-8 Ω·m) and minimal optical loss (∼3.5%) at a wavelength of 700 nm.

ZnO-AuxCu1-x Alloy and ZnO-AuxAl1-x Alloy Vertically Aligned Nanocomposites for Low-Loss Plasmonic Metamaterials

Hyperbolic metamaterials are a class of materials exhibiting anisotropic dielectric function owing to the morphology of the nanostructures. In these structures, one direction behaves as a metal, and the orthogonal direction behaves as a dielectric material. Applications include subdiffraction imaging and hyperlenses. However, key limiting factors include energy losses of noble metals and challenging fabrication methods. In this work, self-assembled plasmonic metamaterials consisting of anisotropic nanoalloy pillars embedded into the ZnO matrix are developed using a seed-layer approach. Alloys of Au_xAl_1−x or Au_xCu_1−x are explored due to their lower losses and higher stability. Optical and microstructural properties were explored. The ZnO-Au_xCu_1−x system demonstrated excellent epitaxial quality and optical properties compared with the ZnO-Au_xAl_1−x system. Both nanocomposite systems demonstrate plasmonic resonance, hyperbolic dispersion, low losses, and epsilon-near-zero permittivity, making them promising candidates towards direct photonic integration.

Synergy between plasmonic and sites on gold nanoparticle-modified bismuth-rich bismuth oxybromide nanotubes for the efficient photocatalytic CC coupling synthesis of ethane

The photocatalytic reduction of carbon dioxide (CO₂) to fossil fuels has attracted widespread attention. However, obtaining the high value-added hydrocarbons, especially C₂₊ products, remains a considerable challenge. Herein, gold (Au) nanoparticle-modified bismuth-rich bismuth oxybromide Bi₁₂O₁₇Br₂ nanotube composites were designed and tested. Au nanoparticles act as electron traps and thermal electron donors that promote the efficient separation and migration of carriers to form the C₂₊ product. As a result, compared with the pure Bi₁₂O₁₇Br₂ nanotubes, Au@Bi₁₂O₁₇Br₂ composites can not only produce the carbon monoxide (CO) and methane (CH₄), but also covert CO₂ into ethane (C₂H₆). In this study, Au@Bi₁₂O₁₇Br₂-700 was used to obtain a C₂H₆ production rate of 29.26 μmol h^-1 g^-1. The selectivities during a 5-hour test reached 94.86% for hydrocarbons and 90.81% for C₂H₆. The proposed approach could be used to design high-performance photocatalysts to convert CO₂ into high value-added hydrocarbon products.

Cu2-x Sx Capped AuCu Nanostars for Efficient Plasmonic Photothermal Tumor Treatment in the Second Near-Infrared Window

Plasmonic nanohybrids are promising photo energy conversion materials in photoelectronics and biomedicine, due to their unique surface plasmon resonance (SPR). Au and Cu_2-x S_x nanostructures with strong SPR in the near-infrared (NIR) spectral region are classic plasmonic systems used to convert NIR photons into heat for photothermal therapy (PTT). The rational design of the Au/Cu_2-x S_x nanohybrids is expected to induce better photothermal conversion; however, the construction of such hybrids via wet-chemistry methods with a well-controlled interfacial structure is still challenging. Here, the synthesis of an AuCu Star/Cu_2-x S_x nanohybrid is reported, where the Cu_2-x S_x components are selectively grown on the AuCu nanostar tips to form "caps". The spatial formation of the Cu_2-x S_x caps on star tips is mainly governed by surfactant concentration, tip curvature, and experimental manipulation. The nanohybrids show low cytotoxicity and superior photothermal conversion efficiency, enabling robust PTT to kill cancer cells in the second NIR window. Numerical simulation reveals that the coupling of Cu_2-x S_x on nanostar tips generates strong interfacial electric field, improving photothermal conversion. Moreover, the spatial separation structure favors the continuous flow of hot charge carriers to produce active radicals, further promoting the tumor treatment effect.

Integration of Au Nanosheets and GdOF:Yb,Er for NIR-I and NIR-II Light-Activated Synergistic Theranostics

The local hyperthermia (>41 °C) effect of photothermal therapy (PTT) is significantly limited by the efficiency of PTT agents to convert laser energy to heat, and such oncotherapy, similar to conventional chemotherapy, invariably encounters the challenge of nonspecific application. Undue reliance on oxygen sources still poses particular difficulties in photodynamic therapy (PDT) for deep-level clinical applications. Considering these therapeutic issues, in this study, we constructed a versatile but unique nanosystem by encapsulating Au nanosheets in codoped gadolinium oxyfluoride (GdOF):Yb,Er spheres, followed by decoration of a chemotherapeutic drug (doxorubicin), photosensitizer (rose Bengal, RB), and targeted agent (folic acid). This allowed the incorporation of cancer treatment and real-time curative efficacy monitoring into one single theranostic nanoplatform. Benefiting from the dual contribution of the strong absorptions in the NIR-I and NIR-II regions, relevant photothermal-conversion efficiency (η) values pertaining to that final product were 39.2% at 1064 nm irradiation and 35.7% at 980 nm illumination. The fluorescence resonance energy transfer that occurred in the up-converted GdOF:Yb,Er to RB contributed to the high PDT efficacy. Combined with a micromeric acid-responsive drug release in a targeted tumor microenvironment, high-performance synergistic therapy was realized. In addition, up-conversion fluorescence imaging and computed tomography imaging accompanied by multimodal magnetic resonance imaging were simultaneously achieved owing to the doped lanthanide ions and the encapsulated Au nanosheets. Our designed oncotherapy nanosystem provides an alternative strategy to acquire ideal theranostic effects.

Electronic Structure and Stacking Arrangement of Tungsten Disulfide at the Gold Contact

There is an intensive effort to control the nature of attractive interactions between ultrathin semiconductors and metals and to understand its impact on the electronic properties at the junction. Here, we present a photoelectron spectroscopy study on the interface between WS₂ films and gold, with a focus on the occupied electronic states near the Brillouin zone center (i.e., the Γ point). To delineate the spectra of WS₂ supported on crystalline Au from the suspended WS₂, we employ a microscopy approach and a tailored sample structure, in which the WS₂/Au junction forms a semi-epitaxial relationship and is adjacent to suspended WS₂ regions. The photoelectron spectra, as a function of WS₂ thickness, display the expected splitting of the highest occupied states at the Γ point. In multilayer WS₂, we discovered variations in the electronic states that spatially align with the crystalline grains of underlying Au. Corroborated by density functional theory calculations, we attribute the electronic structure variations to stacking variations within the WS₂ films. We propose that strong interactions exerted by Au grains cause slippage of the interfacing WS₂ layer with respect to the rest of the WS₂ film. Our findings illustrate that the electronic properties of transition metal dichalcogenides, and more generally 2D layered materials, are physically altered by the interactions with the interfacing materials, in addition to the electron screening and defects that have been widely considered.

Three-dimensional nanorod array for label-free surface-enhanced Raman spectroscopy analysis of microRNA pneumoconiosis biomarkers

Novel approaches are required to overcome the challenges associated with conventional microRNA (miRNA) detection methods and realize the early diagnosis of diseases. This work describes a novel label-free surface-enhanced Raman spectroscopy (SERS) method for the detection of the miRNA biomarkers for pneumoconiosis on a three-dimensional Au-coated ZnO nanorod array (Au-ZnO NRA). The Au-ZnO NRA substrate, which was fabricated via a modified seeding method combined with ion sputtering, provided a high enhancement factor and good spatial uniformity of the signal. With the Au-ZnO NRA, the SERS spectra of miRNAs were obtained in 30 s without labeling at room temperature. Density functional theory calculations were performed to understand the structural fingerprints of the miRNAs. Principal component analysis was carried out to identify the pneumoconiosis biomarkers based on their fingerprint SERS signals. Dual-logarithm linear relationships between the SERS intensity and the miRNA concentration were proposed for quantitative analysis. The label-free SERS method has limits of detection on the femtomolar level, which is much lower than the concentrations of the miRNA biomarkers for pneumoconiosis in lung fibroblasts.

Detection of Au+ Ions During Fluorine Gas-Assisted Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS) for the Complete Elemental Characterization of Microbatteries

Due to excellent electric conductivity and chemical inertness, Au can be used in new microdevices for energy applications, microelectronics, and biomedical solutions. However, the chemical analysis of Au-containing systems using time-of-flight secondary ion mass spectrometry (TOF-SIMS) can be difficult because of the negative ionization of Au, as most metals form positive ions, and therefore cannot be detected from the same analytical volume. In this work, we present the potential of fluorine gas coinjection for altering the polarity, from the negative to positive, of Au secondary ions generated under Ga⁺ beam bombardment. The importance of detecting Au⁺ ions and representing their spatial distribution in nanoscale was demonstrated using a novel solid electrolyte for Li-ion solid-state batteries, amorphous Li₇La₃Zr₂O₁₂ (aLLZO). This allowed for assessing the migration of mobile Li⁺ ions outside the aLLZO layer and alloying the Au layer with Li, which explained the presence of an internal electric field observed during the polarization measurements. Remarkably, during fluorine gas-assisted TOF-SIMS measurements, the trace amount of Au content (5 ppm) was detected in a Pt layer (unattainable under standard vacuum conditions). In conclusion, fluorine gas-assisted TOF-SIMS can help understanding operation mechanisms and potential degradation processes of microdevices and therefore help optimizing their functionality.

Light Scattering Calculations for Spherical Metallic Nanoparticles (Ag, Au) Coated by TCO (AZO, ITO, PEDOT:PSS) Shell

Ag and Au nanostructures became increasingly interesting due to their localized surface plasmon resonance properties. These properties can be successfully exploited in order to enhance the light trapping in solar cell devices by appropriate light scattering phenomena. In solar cell applications, the Ag or Au nanoparticles are, usually, supported on or embedded in a thin transparent conductive oxide layer, mainly AZO and ITO for inorganic solar cells and PEDOT:PSS for organic solar cells. However, the light scattering properties strongly depend on the shape and size of the metal nanostructures and on the optical properties of the surrounding environment. Therefore, the systems need to be well designed to maximize scattering and minimize the light absorption within the metal nanoparticles. In this regard, this work reports, in particular, results concerning calculations, by using the Mie theory, of the angle-dependent light scattering intensity (I(θ)) for spherical Ag and Au nanoparticles coated by a shell of AZO or ITO or PEDOT:PSS. I(θ) and scattering efficiency Q_scatt for the spherical core–shell nanoparticles are calculated by changing the radius R of the spherical core (Ag or Au) and the thickness d of the shell (AZO, ITO, or PEDOT:PSS). For each combination of core–shell system, the evolution of I(θ) and Q_scatt with the core and shell sizes is drawn and comparisons between the various types of systems is drawn at parity of core and shell sizes. For simplicity, the analysis is limited to spherical core–shell nanoparticles so as to use the Mie theory and to perform analytically exact calculations. However, the results of the present work, even if simplified, can help in establishing the general effect of the core and shell sizes on the light scattering properties of the core–shell nanoparticles, essential to prepare the nanoparticles with desired structure appropriate to the application.

Dynamic metallization of spherical DNA via conformational transition into gold nanostructures with controlled sizes and shapes

Despite the reversible condensation properties of DNA, DNA metallization during controlled conformational transitions has been rarely investigated. We perform dynamic metallization of spherically condensed DNA nanoparticles (DNA NPs) via a globule-to-coil transition. A positively charged new Au³⁺ reagent is prepared via ligand-exchange of conventional complex Au³⁺ ions, which was used to synthesize spherically condensed DNA NPs simply based on the fundamental electrostatic and coordinative interactions between DNA and Au³⁺ions. Interestingly, the size of the Au³⁺-condensed DNA NPs (Au³⁺-DNA NPs) and the type of reducing agents lead to the formation of different Au nanostructures with unprecedented morphologies (cracked NPs, bowl-shaped NPs, and small NPs), owing to the controlled conformational changes in the Au³⁺-DNA NPs during metallization. The condensed DNA NPs play significant roles for Au nanostructures as (1) the dynamic template for the synthesis, (2) the reservoir and supply of Au³⁺ for the growth, and (3) the surface stabilizer. The synthesized Au nanostructures are remarkably stable against high ionic strength and exhibit catalytic activities and excellent SERS properties. This is the first study on the morphological control and concomitant dynamic metallization of spherically condensed DNA, proposing new synthetic routes for bioinorganic nanomaterials.

Multichannel Electron Transmission and Fluorescence Resonance Energy Transfer in In2S3/Au/rGO Composite for CO2 Photoreduction

Efficient electron transmission is an important step in the process of CO₂ photoreduction. In this paper, a multi-interface-contacted In₂S₃/Au/reduced graphene oxide (rGO) photocatalyst with the fluorescence resonance energy transfer (FRET) mechanism has been successfully prepared by the solvothermal, self-assembly, and hydrothermal reduction processes. Photocatalytic CO₂ reduction experiments showed that the In₂S₃/Au/rGO (IAr-3) composite exhibited excellent photoreduction performance and photocatalytic stability. The yields of CO and CH₄ obtained after the photoreduction process with IAr-3 as the catalyst were around 4 and 6 times higher than those of pure In₂S₃, respectively. Photoelectrochemical analysis showed that the multi-interface contact and FRET mechanism greatly improved the generation, transmission, and separation efficiency of carriers photogenerated within the photocatalyst. In situ FTIR test was applied to analyze the photocatalytic CO₂ reduction process. ¹³C isotope tracer test confirmed that the carbon source of CO and CH₄ was the CO₂ molecules in the photoreduction process rather than the decomposition of catalyst or TEOA. A potential enhanced photocatalytic mechanism has been discussed in total.

Conversion of Glycerol to Value Added Products in a Semi-Continuous Batch Reactor Using Noble Metals Supported on ZSM-11 Zeolite

Au, Pt, and Pd supported on ZSM-11 microporous zeolite were investigated as catalysts for glycerol (GLY) oxidation towards higher value added products. ZSM-11 was synthesized by hydrothermal treatment. Subsequently, ion exchange with NH₄Cl was performed to recover acidic sites and then, Au, Pt, and Pd were incorporated onto this material by wet impregnation procedure. After thermal treatment of desorption and calcination, the corresponding Au, Pt, and Pd-ZSM-11 catalysts were obtained. These materials were characterized by different techniques, such as XRD, ICP, TEM- XEDS, and XPS, and were evaluated in the glycerol oxidation reaction by using alkaline medium and molecular oxygen as oxidizing agent. The higher conversion of GLY (66.5 mol.%) was reached for the Pt–ZSM-11 catalyst with moderate selectivity towards lactic acid (LA), while the bimetallic Au-Pt-ZSM-11 catalyst offered high selectivity to LA at moderate GLY conversion. Optimization of the main reaction parameters (i.e., temperature, reaction time and NaOH/GLY ratio) was carried out to maximize the selectivity towards the LA desired product. Thus, LA selectivity values close to 55% at GLY conversion >65% can be reached by using Pt-ZSM-11 as a catalyst under mild reaction conditions.

Au/CdS Core-Shell Sensitized Actinomorphic Flower-Like ZnO Nanorods for Enhanced Photocatalytic Water Splitting Performance

Herein, a novel actinomorphic flower-like ZnO/Au/CdS nanorods ternary composite photocatalyst is prepared to extend the light-responsive range, reduce the photogenerated charge carriers recombination, and ultimately improve the water splitting performance. Flower-like ZnO nanorods are synthesized by a chemical bath method and the CdS nanoparticles are sensitized by successive ionic layer adsorption and reaction method. Then the Au nanoparticles as co-catalysts are introduced by the photodeposition method to modify the interface of ZnO/CdS for reducing the photogenerated electron recombination rate and further improving the performance of water splitting. Detailed characterizations and measurements are employed to analyse the crystallinity, morphology, composition, and optical properties of the flower-like ZnO/Au/CdS nanorods samples. As a result, the flower-like ZnO/Au/CdS nanorod samples present significantly enhanced water splitting performance with a high gas evolution rate of 502.2 μmol/g/h, which is about 22.5 and 1.5 times higher than that of the pure ZnO sample and ZnO/CdS sample. The results demonstrate that the flower-like ZnO/Au/CdS nanorods ternary composite materials have great application potential in photocatalytic water splitting for the hydrogen evolution field.

Bonding of Gold Nanoclusters on Graphene with and without Point Defects

Hybrid nanostructures of size-selected nanoparticles (NPs) and 2D materials exhibit striking physical and chemical properties and are attractive for many technology applications. A major issue for the performance of these applications is device stability. In this work, we investigate the bonding of cuboctahedral, decahedral and icosahedral Au NPs comprising 561 atoms on graphene sheets via 103-atom scale ab initio spin-polarized calculations. Two distinct cases we considered: (i) the Au NPs sit with their (111) facets on graphene and (ii) the NPs are oriented with a vertex on graphene. In both cases, we compare the binding energies with and without a graphene vacancy under the NP. We find that in all cases, the presence of the graphene vacancy enhances the bonding of the NPs. Significantly, in the vertex-on-graphene case, the binding energy is considerably increased by several eVs and becomes similar to the (111) facet-on-graphene case. The strain in the NPs is found to be minimal and the displacement of the carbon atoms in the immediate neighborhood of the vacancy is on the 0.1 Å scale. The work suggests the creation of stable NP-graphene systems for a variety of electronic, chemical and photonic applications.

Atomically Dispersed Au on In2O3 Nanosheets for Highly Sensitive and Selective Detection of Formaldehyde

As an important industrial chemical, formaldehyde is used in various fields but is harmful to health. Developing a convenient detection device for formaldehyde is significant. Based on atomically dispersed Au on In₂O₃ nanosheets, a formaldehyde sensor was fabricated in this work. The highly dispersed Au obtained by the ultraviolet (UV) light-assisted reduction method helps improve the sensing performance. A meager loading amount (0.01 wt %) of Au on In₂O₃ nanosheets exhibits high sensitivity toward ppb-level formaldehyde. Au acts as an electron sink and promotes the oxidation of formaldehyde. Atomically dispersed Au on In₂O₃ nanosheets decreases the activation energy and increases the number of active sites, which result in a highly efficient conversion of formaldehyde and a marked resistance change of the fabricated sensors. The selective adsorption and oxidation of formaldehyde on single atom Au's uniform sites establish excellent selectivity. Besides, the sensor exhibits short response/recovery time and excellent stability, with promising applications in formaldehyde detection.

Optimization of sol-immobilized bimetallic Au-Pd/TiO2 catalysts: reduction of 4-nitrophenol to 4-aminophenol for wastewater remediation

A sol-immobilization method is used to synthesize a series of highly active and stable Au_xPd_1-x/TiO₂ catalysts (where x = 0, 0.13, 0.25, 0.5, 0.75, 0.87 and 1) for wastewater remediation. The catalytic performance of the materials was evaluated for the catalytic reduction of 4-nitrophenol, a model wastewater contaminant, using NaBH₄ as the reducing agent under mild reaction conditions. Reaction parameters such as substrate/metal and substrate/reducing agent molar ratios, reaction temperature and stirring rate were investigated. Structure-activity correlations were studied using a number of complementary techniques including X-ray powder diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy. The sol-immobilization route provides very small Au-Pd alloyed nanoparticles, with the highest catalytic performance shown by the Au_0.5Pd_0.5/TiO₂ catalyst. This article is part of a discussion meeting issue 'Science to enable the circular economy'.

Diagnostic utility of integrated analysis of exome and transcriptome: Successful diagnosis of Au-Kline syndrome in a patient with submucous cleft palate, scaphocephaly, and intellectual disabilities

Background

A weakness of exome analysis lies in inability to characterize aberrant splicing other than those involving consensus donor‐acceptor sequence. To overcome this limitation, we developed a novel analytic method SAVNet that combines transcriptome and exome analysis which enabled the successful detection of carriers of splicing variants in the disease‐causing genes of autosomal recessive disorders within a normal cohort. However, the clinical utility of the SAVNet analysis in delineating splicing defects in patients without a diagnosis has yet to be documented.

Method

We performed SAVNet analysis using the integrated analysis of exome and transcriptome analysis from the peripheral blood of the patient. The patient is an undiagnosed Japanese female patient with submucous cleft palate, scaphocephaly and intellectual disability with no words at 8 years of age. Dysmorphic features included a long face, a short palpebral fissure, thick lips with an open month, premaxillary hypoplasia, a depressed nasal bridge, and satyr ears.

Result

A SAVNet analysis showed that a heterozygous intronic variant located at the −10 position of exon 5 of the HNRNPK gene on chromosome 9 created a new splice acceptor sequence “ag” and led to the incorporation of 9 intronic nucleotides into the coding sequence. The mutant protein would have three extra amino acid residues, Leu‐Leu‐Gln, inserted within the critical KH domain. The patient was diagnosed as having recently delineated Au–Kline syndrome, which is characterized by cleft palate, craniosynostosis, and intellectual disability.

Conclusion

The successful molecular diagnosis of the presently reported patient illustrates the diagnostic utility of the SAVNet analysis as an innovative way of implementing an integrated exome‐transcriptome analysis in clinical settings.

Cardiac troponin I photoelectrochemical sensor: {Mo368} as electrode donor for Bi2S3 and Au co-sensitized FeOOH composite

A suitable electron donor, which guarantees the stability of the whole system, is considered as the driving force of the PEC sensor. Nowadays, searching appropriate electron donor is still one of the orientations to explorate in the field of sensor. Na₄₈[H₄₉₆Mo₃₆₈O₁₄₆₄S₄₈]·ca.1000H₂O (abbr. {Mo₃₆₈}), as a type of polyoxometalate, has perfect morphology, definite size and unique electronic property. Due to the prominent water solubility, {Mo₃₆₈} usually releases small cations and exists as large anions in the ultrapure water. The interesting property endows {Mo₃₆₈} with excellent reducibility, which provides great feasibility to become an outstanding electron donor. In addition, FeOOH prepared through a simple operation owns high adsorption capacity, which ensures the fastness of other materials. Subsequently, the narrow band-gap of Bi₂S₃ and the unique noble metal properties of Au nanoparticles are utilized to co-sensitize FeOOH to improve the light-harvesting capability and photoelectric conversion efficiency. Combined with the specificity recognition of antigen and antibody, a novel photoelectrochemical sensor is constructed with a wide detection range of 1.00 pg mL^-1 - 100 ng mL^-1 and low detection limit (0.76 pg mL^-1), which achieves the sensitive detection of cardiac troponin I in early diagnosis of cardiovascular disease.

Photodeposition of Au Nanoclusters for Enhanced Photocatalytic Dye Degradation over TiO2 Thin Film

Au nanoparticle (NP) decorated heterogeneous TiO₂ catalysts are known to be effective in the degradation of various organic pollutants. The photocatalytic performance of such Au-TiO₂ structures remarkably depends on the size, morphology, and surface coverage of the Au NPs decorating TiO₂. Here we propose an effective way of preparing a highly active Au nanocluster (NC) decorated TiO₂ thin film by a novel photodeposition method. By altering the solvent type as well as the illumination time, we achieved well-controlled surface coverage of TiO₂ by Au NCs, which directly influences the photocatalytic performance. Here the Au NCs coverage affects both the electron store capacity and the optical absorption of the hybrid Au-TiO₂ system. At low surface coverage, 19.2-29.5%, the Au NCs seem to enhance significantly the optical adsorption of TiO₂ at UV wavelengths which therefore leads to a higher photocatalytic performance.

Toluene-sensing Properties of Mixed-potential Type Yttria-stabilized Zirconia-based Gas Sensors Attached with Thin CeO2-added Au Electrodes

Toluene-sensing properties of mixed-potential type yttria-stabilized zirconia (YSZ)-based sensors attached with a thin CeO₂-added Au sensing electrode (SE, CeO₂ content: 4 - 16 mass%, thickness: 30 - 100 nm), which was fabricated by using a spin-coating method, were examined and the effects of their SE thickness and the additive amount of CeO₂ on their toluene response were discussed in this study. The toluene response of the sensors attached with a 16 mass% CeO₂-added Au SE increased with an increase in the SE thickness, and the sensor attached with the thickest 16 mass% CeO₂-added Au SE showed the largest response, among all the sensors tested. This behavior probably arises from the increase in the number of active sites for electrochemical toluene oxidation in the CeO₂-added Au SE.

Probing the Origin of Gold Dissolution and Tunneling Across Ni2P Shell Using in situ Transmission Electron Microscopy

Hybrid core-shell catalysts possess superior physiochemical properties that are closely related to their atomic structures. Here, we report novel diffusion phenomena in an Au-Ni₂P yolk-shell structure using in situ heating transmission electron microscopy (TEM) analysis. The Au yolks can dissolve completely into and diffuse across the Ni₂P shell at 500 °C, resulting in an inward volume expansion of the Ni₂P shell and shrinkage of the void. The dissolved Au is subsequently segregated, forming a new crystal on the outer layer of the shell. A detailed atomic-scale resolution imaging revealed that the outward Au diffusion and aggregation occur when the Au yolks are epitaxial to the Ni₂P shells. Theoretical analysis shows that the outward diffusion and deposition of Au atoms is primarily driven by the excess epitaxial strain energy.

In Situ Optical and Stress Characterization of Alloyed PdxAu1-x Hydrides

Pd_xAu_1-x alloys have recently shown great promise for next-generation optical hydrogen sensors due to their increased chemical durability while their optical sensitivity to small amounts of hydrogen gas is maintained. However, the correlation between chemical composition and the dynamic optical behavior upon hydrogenation/dehydrogenation is currently not well understood. A complete understanding of this relation is necessary to optimize future sensors and nanophotonic devices. Here, we quantify the dynamic optical, chemical, and mechanical properties of thin film Pd_xAu_1-x alloys as they are exposed to H₂ by combining in situ ellipsometry with gravimetric and stress measurements. We demonstrate the dynamic optical property dependence of the film upon hydrogenation and directly correlate it with the hydrogen content up to a maximum of 7 bar of H₂. With this measurement, we find that the thin films exhibit their strongest optical sensitivity to H₂ in the near-infrared. We also discover higher hydrogen-loading amounts as compared to previous measurements for alloys with low atomic percent Pd. Specifically, a measurable optical and gravimetric hydrogen response in alloys as low as 34% Pd is found, when previous works have suggested a disappearance of this response near 55% Pd. This result suggests that differences in film stress and microstructuring play a crucial role in the sorption behavior. We directly measure the thin film stress and morphology upon hydrogenation and show that the alloys have a substantially higher relative stress change than pure Pd, with the pure Pd data point falling 0.9 GPa below the expected trend line. Finally, we use the measured optical properties to illustrate the applicability of these alloys as grating structures and as a planar physical encryption scheme, where we show significant and variable changes in reflectivity upon hydrogenation. These results lay the foundation for the composition and design of next-generation hydrogen sensors and tunable photonic devices.

Love Wave Surface Acoustic Wave Sensor with Laser-Deposited Nanoporous Gold Sensitive Layer

Laser-deposited gold immobilization layers with different porosities were incorporated into Love Wave Surface Acoustic Wave sensors (LW-SAWs). Acetylcholinesterase (AChE) enzyme was immobilized onto three gold interfaces with different morphologies, and the sensor response to chloroform was measured. The response of the sensors to various chloroform concentrations indicates that their sensing properties (sensitivity, limit of detection) are considerably improved when the gold layers are porous, in comparison to a conventional dense gold layer. The results obtained can be used to improve properties of SAW-based biosensors by controlling the nanostructure of the gold immobilization layer, in combination with other enzymes and proteins, since the design of the present sensor is the same as that for a Love Wave biosensor.

Structure-Property-Performance Relationship of Ultrathin Pd-Au Alloy Catalyst Layers for Low-Temperature Ethanol Oxidation in Alkaline Media

Pd-containing alloys are promising materials for catalysis. Yet, the relationship of the structure-property performance strongly depends on their chemical composition, which is currently not fully resolved. Herein, we present a physical vapor deposition methodology for developing Pd_xAu_1-x alloys with fine control over the chemical composition. We establish direct correlations between the composition and these materials' structural and electronic properties with its catalytic activity in an ethanol (EtOH) oxidation reaction. By combining X-ray diffraction (XRD) and X-ray photelectron spectroscopy (XPS) measurements, we validate that the Pd content within both bulk and surface compositions can be finely controlled in an ultrathin-film regime. Catalytic oxidation of EtOH on the Pd_xAu_1-x electrodes presents the largest forward-sweeping current density for x = 0.73 at ∼135 mA cm^-2, with the lowest onset potential and largest peak activity of 639 A g_Pd^-1 observed for x = 0.58. Density functional theory (DFT) calculations and XPS measurements demonstrate that the valence band of the alloys is completely dominated by Pd particularly near the Fermi level, regardless of its chemical composition. Moreover, DFT provides key insights into the Pd_xAu_1-x ligand effect, with relevant chemisorption activity descriptors probed for a large number of surface arrangements. These results demonstrate that alloys can outperform pure metals in catalytic processes, with fine control of the chemical composition being a powerful tuning knob for the electronic properties and, therefore, the catalytic activity of ultrathin Pd_xAu_1-x catalysts. Our high-throughput experimental methodology, in connection with DFT calculations, provides a unique foundation for further materials' discovery, including machine-learning predictions for novel alloys, the development of Pd-alloyed membranes for the purification of reformate gases, binder-free ultrathin electrocatalysts for fuel cells, and room temperature lithography-based development of nanostructures for optically driven processes.

Mechanism of CO2-formation promotion by Au in plasma-catalytic oxidation of CH4 over Au/γ-Al2O3 at room temperature

The plasma-catalytic oxidation of methane (CH₄) is a potential reaction for controlling CH₄ emissions at low temperatures. However, the mechanism of the CH₄ plasma-catalytic oxidation is still unknown, which inhibits the further optimization of the oxidation process. Herein, a CH₄ oxidation mechanism over an Au/γ-Al₂O₃ catalyst was proposed based on our experimental findings. CH₄ is first decomposed to CH₃ and H by the discharge, and a fraction of the CH₃ is adsorbed on γ-Al₂O₃ surface for deep oxidation. The oxygen atoms produced by the discharge react with H₂O to yield surface reactive OH groups that contribute to the CH₃ oxidation. Oxygen atoms also promote the release of H₂O from the surfaces of the γ-Al₂O₃ and Au/γ-Al₂O₃ and especially promote CO₂ desorption from the surface of the Au/γ-Al₂O₃. When γ-Al₂O₃ was used as the catalyst, the CO₂ selectivity was only 15 vol.%, and the CH₄ conversion decreased after 7 h of plasma-catalytic oxidation. In contrast, when Au/γ-Al₂O₃ was used, the CO₂ selectivity was 80 vol.%, long-term CH₄ conversion was obtained. Experimental results revealed that Au was beneficial for the decomposition of surface carbonate species into gaseous CO₂, whereas the carbonate species accumulated on γ-Al₂O₃ when Au was absent.

Sensing Nitrogen Mustard Gas Simulant at the ppb Scale via Selective Dual-Site Activation at Au/Mn3O4 Interfaces

The efficient detection of chemical warfare agents (CWAs), putting at stake human life and global safety, is of paramount importance in the development of reliable sensing devices for safety applications. Herein, we present the fabrication of Mn₃O₄-based nanocomposites containing noble metal particles for the gas-phase detection of a simulant of vesicant nitrogen mustard, i.e., di(propylene glycol) monomethyl ether (DPGME). The target materials were fabricated by chemical vapor deposition of manganese oxide on Al₂O₃ substrates and subsequent functionalization with silver or gold via radio frequency sputtering. The obtained high purity composites, characterized by an intimate metal/oxide contact, yielded an outstanding efficiency in the detection of DPGME. In particular, sensing of the latter analyte with an ultralow detection limit of 0.6 ppb could be performed selectively with respect to other CWA simulants. In addition, the tuneability of selectivity patterns as a function of metal nanoparticle nature paves the way to the development of efficient and selective devices for practical end uses.

Potential of contrast agents to enhance in vivo confocal microscopy and optical coherence tomography in dermatology: A review

Distinction between normal skin and pathology can be a diagnostic challenge. This systematic review summarizes how various contrast agents, either topically delivered or injected into the skin, affect distinction between skin disease and normal skin when imaged by optical coherence tomography (OCT) and confocal microscopy (CM). A systematic review of in vivo OCT and CM studies using exogenous contrast agents on healthy human skin or skin disease was performed. In total, nine CM studies and one OCT study were eligible. Four contrast agents aluminum chloride (AlCl) n = 2, indocyanine green (ICG) n = 3, sodium fluorescein n = 3 and acetic acid n = 1 applied to CM in variety of skin diseases. ICG, acetic acid and AlCl showed promise to increase contrast of tumor nests in keratinocyte carcinomas. Fluorescein and ICG enhanced contrast of keratinocytes and adnexal structures. In OCT of healthy skin gold nanoshells, increased contrast of natural skin openings. Contrast agents may improve delineation and diagnosis of skin cancers; ICG, acetic acid and AlCl have potential in CM and gold nanoshells facilitate visualization of adnexal skin structures in OCT. However, as utility of bedside optical imaging increases, further studies with robust methodological quality are necessary to implement contrast agents into routine dermatological practice.

Effects of Au and Ge Additions on the Microstructures and Properties of Ag-1.5Cu-0.1Y Alloys

The application of silver is seriously affected by its tendency to oxidize and corrode. Therefore, the addition of proper alloying elements to silver-based alloys to achieve better properties has become a hot topic at present. In this current study, the effects of the addition of the two elements Au and Ge on the microstructures and properties of Ag-1.5Cu-0.1Y alloys were investigated. The results showed that the microstructures were refined and the second dendrite was shortened in the Ag-1.5Cu-0.1Y alloys with the addition of Au and Ge. Adding Au enhanced the corrosion resistance of the Ag-1.5Cu-0.1Y alloys. Furthermore, the corrosion resistance of the Ag-1.5Cu-0.1Y alloys with the addition of both Ge and Au was better than that of the alloy samples with Au added alone. The best corrosion resistance of the Ag-1.5Cu-0.1Y alloys was achieved by adding 1.0 wt.% Au and 1.0 wt.% Ge. The microhardness was enhanced by the addition of Au and Ge, and was strongly correlated with the secondary dendrite arm spacing (λ₂) of the Ag-1.5Cu-0.1Y alloys. In addition, the Au addition could improve the conductivity of the Ag-1.5Cu-0.1Y alloy; however, Ge had little effect on the conductivity of the alloy samples. This work provides an experimental basis for the design of better performing silver-based alloys.

Au-aided reduced graphene oxide-based nanohybrids for photo-chemotherapy

Graphene-based nanomaterials show great potential in photo-chemotherapy, but their photo-thermal effect is not very satisfactory. Herein, we presented a facile and low-cost strategy to grow Au clusters on the reduced graphene oxide (rGO) sheets aiming to improve photothermal effect. Au clusters with low-concentration was directly conjugated on the surface of rGO by electrostatic forces. To improve its biocompatibility, 3‑(3‑phenylureido) propanoic acid (PPA)-PEG (PPEG) had been introduced as biodegradable backbone to form rGO/Au/PPEG nanohybrids via π-π accumulation. The obtained rGO-based nanohybrids showed excellent biocompatibility, stability, low cytotoxicity, and enhanced photo-thermal conversion efficiency. To verify the synergistic photo-chemotherapy, doxorubicin (DOX) as a drug model had been loaded in rGO/Au/PPEG nanohybrids. The results indicated that rGO/Au/PPEG/DOX exhibited synergistic therapeutic efficacy compared with single chemotherapy or photothermal therapy, endowing this designed rGO-based nanohybrids with great potential for cancer treatments.

Apoferritin nanocages with Au nanoshell coating as drug carrier for multistimuli-responsive drug release

Cancer is one of the major causes of mortality worldwide. Therefore, it is necessary to provide an effective method of tumor therapy. Herein, we designed a new type of composite particle, apoferritin (APO) encapsulated doxorubicin (DOX), and the surface of APO was modified with Au nanoshell. As a nanocarrier, APO can carry chemotherapy drug DOX (APODOX) and release drug under acidic and high temperature conditions to reduce side effects of anticancer drugs. After covering Au nanoshell (APODOX-Au), the photothermal effect can be produced because of the unique surface plasmon resonance properties of gold nanoshell. This nanoplatform also provides the multi-stimuli responsive drug release system, which can achieve drug release in different conditions and have great potential in biomedical applications. Our investigation has demonstrated that APODOX-Au has good stability, high dispersibility and biocompatibility in vitro. The strong near-infrared absorption and good photothermal effect make sure the quick response to environmental changes (pH, temperature) to achieve drug release. These findings indicate that these nanoparticles have a potential application value in cancer treatment.

Controlled-temperature photothermal and oxidative bacteria killing and acceleration of wound healing by polydopamine-assisted Au-hydroxyapatite nanorods

Since skin wounds are subject to bacterial infection and tissue regeneration may be impeded, there is demand for biomaterials that possess rapid bactericidal and tissue repair capability. Herein we report in situ promotion of wound healing by a photothermal therapy (PTT) assisted nanocatalytic antibacterial system utilizing a polydopamine (PDA) coating on hydroxyapatite (HAp) incorporated with gold nanoparticles (Au-HAp). The PDA@Au-HAp NPs produce hydroxyl radicals (OH) via catalysis of a small concentration of H₂O₂ to render bacteria more vulnerable to the temperature change. The antibacterial efficacy against Escherichia coli and Staphylococcus aureus is 96.8% and 95.2%, respectively, at a controlled photo-induced temperature of 45 °C that causes no damage to normal tissues. By combining catalysis with near-infrared (NIR) photothermal therapy, the PDA@Au-HAp NPs provide safe, rapid, and effective antibacterial activity compared to OH or PTT alone. In addition, this system stimulates the tissue repairing-related gene expression to facilitate the formation of granulation tissues and collagen synthesis and thus accelerate wound healing. After the 10-day treatment of skin wounds in vivo, PDA@Au-HAp group exhibits quicker recovery than the control group and both sterilization and healing are completed after the 10-day treatment.

STATEMENT OF SIGNIFICANCE

This study presents in situ promotion of wound healing by a low-temperature photothermal therapy (PTT) assisted nanocatalytic antibacterial system utilizing a polydopamine (PDA) coating on hydroxyapatite (HAp) incorporated with gold nanoparticles (Au-HAp). The PDA@Au-HAp NPs produce hydroxyl radicals (OH) via catalysis of a small concentration of H₂O₂ to render bacteria more vulnerable to temperature change. After irradiation by 808 nm laser, the antibacterial efficacy against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) is 96.8% and 95.2%, respectively, at a low photo-induced temperature of 45 °C which causes no damage to normal tissues. In addition, this system stimulates the tissue repairing-related gene expression to facilitate the formation of granulation tissues and collagen synthesis and accelerate wound healing.

Two optical coherence tomography systems detect topical gold nanoshells in hair follicles, sweat ducts and measure epidermis

Optical coherence tomography (OCT) is an established imaging technology for in vivo skin investigation. Topical application of gold nanoshells (GNS) provides contrast enhancement in OCT by generating a strong hyperreflective signal from hair follicles and sweat glands, which are the natural skin openings. This study explores the utility of 150 nm diameter GNS as contrast agent for OCT imaging. GNS was massaged into skin and examined in four skin areas of 11 healthy volunteers. A commercial OCT system and a prototype with 3 μm resolution (UHR-OCT) were employed to detect potential benefits of increased resolution and variability in intensity generated by the GNS. In both OCT-systems GNS enhanced contrast from hair follicles and sweat ducts. Highest average penetration depth of GNS was in armpit 0.64 mm ± SD 0.17, maximum penetration depth was 1.20 mm in hair follicles and 15 to 40 μm in sweat ducts. Pixel intensity generated from GNS in hair follicles was significantly higher in UHR-OCT images (P = .002) and epidermal thickness significantly lower 0.14 vs 0.16 mm (P = .027). This study suggests that GNSs are interesting candidates for increasing sensitivity in OCT diagnosis of hair and sweat gland disorders and demonstrates that choice of OCT systems influences results.

Scalable Preparation of the Chemically Ordered Pt-Fe-Au Nanocatalysts with High Catalytic Reactivity and Stability for Oxygen Reduction Reactions

Carbon-supported Au-Pt _xFe _y nanoparticles were synthesized via microwave heating polyol process, followed by annealing for the formation of the ordered structure. The structure characterizations indicate that Au is alloyed with intermetallic Pt-Fe nanoparticles and therefore the surface electronic properties are tuned. The electrochemical tests show that the microwave heating polyol process is more effective than oil bath heating polyol process for synthesizing the highly active catalysts. The introduction of trace Au (0.2 wt % Au) significantly improves the oxygen reduction reaction (ORR) catalytic activity of Pt _xFe _y catalysts. Au-PtFe/C-H (0.66 A/mg_Pt) and Au-PtFe₃/C-H (0.63 A/mg_Pt) prepared in a batch of 10.0 g show significantly improved catalytic activities than their counterparts (PtFe/C-H and PtFe₃/C-H) as well as commercial Johnson Matthey Pt/C (0.17 A/mg_Pt). In addition, the as-prepared Au-PtFe/C-H and Au-PtFe₃/C-H display highly enhanced stability toward the ORR compared to the commercial Pt/C. The superior catalytic performance is attributed to the synergistic effect of chemically ordered intermetallic structure and Au. This work provides a scalable synthesis of the multimetallic chemically ordered Au-Pt _xFe _y catalysts with high ORR catalytic performance in acidic condition.

Three-Dimensional CdS/Au Butterfly Wing Scales with Hierarchical Rib Structures for Plasmon-Enhanced Photocatalytic Hydrogen Production

Localized surface plasmon resonance (LSPR) of plasmonic metals (e.g., Au) can help semiconductors improve their photocatalytic hydrogen (H₂) production performance. However, an artificial synthesis of hierarchical plasmonic structures down to nanoscales is usually difficult. Here, we adopt the butterfly wing scales from Morpho didius to fabricate three-dimensional (3D) CdS/Au butterfly wing scales for plasmonic photocatalysis. The as-prepared materials well-inherit the pristine hierarchical biostructures. The 3D CdS/Au butterfly wing scales exhibit a high H₂ production rate (221.8 μmol·h^-1 within 420-780 nm), showing a 241-fold increase over the CdS butterfly wing scales. This is attributed to the effective potentiation effect of LSPR introduced by multilayer metallic rib structures and a good interface bonding state between Au and CdS nanoparticles. Thus, our study provides a relatively simple method to learn from nature and inspiration for preparing highly efficient plasmonic photocatalysts.